annotate lisp/erc/ChangeLog.06 @ 85765:f1a78e8d37f0

* textmodes/flyspell.el (message-signature-separator): * longlines.el (message-indent-citation-function): Pacify byte compiler. * emacs-lisp/cl-loaddefs.el: * ldefs-boot.el: Regenerate. * Makefile.in (BYTE_COMPILE_EXTRA_FLAGS): New variable. (.el.elc, compile, compile-always, compile-calc) ($(lisp)/progmodes/cc-mode.elc): Use it.

2006-12-28  Michael Olson  <[e-mail]>

	* erc-list.el: Change header to mention that this is part of ERC,
	rather than GNU Emacs.

	* erc-networks.el (erc-server-alist): Add Ars OpenIRC and
	LinuxChix networks.  Thanks to Angelina Carlton for mentioning
	them.  Properly escape periods in Konfido.Net and Kewl.Org.
	(erc-networks-alist): Add entries for Ars and LinuxChix, though
	the latter does not actually provide an announced network name.

	* erc-services.el (erc-nickserv-identify-mode): Add 'both method,
	which waits for a NickServ message if the network supports it,
	otherwise sends the password after connecting.
	(erc-nickserv-identify-mode): Default to 'both.
	(erc-nickserv-passwords): Add OFTC and Azzurra to custom options.
	(erc-nickserv-alist): Indentation fix.
	(erc-nickserv-identify-on-connect)
	(erc-nickserv-identify-on-nick-change): Handle 'both method.

2006-12-28  Leo  <[e-mail]>  (tiny change)

	* erc.el (erc-iswitchb): Wrap body in unwind-protect so that
	hitting C-g does not leave iswitchb-mode on.

2006-12-27  Michael Olson  <[e-mail]>

	* erc.el (erc-cmd-RECONNECT): New command that calls
	erc-server-reconnect.

	* erc-backend.el (erc-server-reconnect-count): New server variable
	that keeps track of reconnection attempts.
	(erc-server-reconnect-attempts): New option that determines the
	number of reconnection attempts that ERC will make per server.
	(erc-server-reconnect-timeout): New option that determines the
	amount of time, in seconds, that ERC will wait between successive
	reconnect attempts.
	(erc-server-reconnect): New function that reestablishes the
	current IRC connection.  Move some commands from
	erc-process-sentinel-1 here.
	(erc-process-sentinel-1): If we have been disconnected, loop until
	we either reconnect or run out of attempts.
	(erc-server-reconnect-p): Move higher and make this a defsubst,
	since I'm worried about the current buffer changing from
	underneath us.  Implement limit of number of reconnect attempts..

	* erc.texi (Getting Started): Update for /RECONNECT command.

2006-12-26  Michael Olson  <[e-mail]>

	* erc.el (erc-open): Restore old point correctly, or at least get
	closer to doing so than before.

2006-12-13  Leo  <[e-mail]>  (tiny change)

	* erc.el (erc-iswitchb): Temporarily enable iswitchb mode if it
	isn't active already, instead of leaving it on.

2006-12-10  Juanma Barranquero  <[e-mail]>

	* erc-ezbounce.el (erc-ezb-init-session-list): Doc fix.

2006-12-08  Michael Olson  <[e-mail]>

	* erc.el: Re-evaluate contributions from a contributor, and found
	them under 15 lines of non-obvious code, so it is safe to remove
	the copyright notice.
	(erc-modules): Remove list module.

	* erc-list.el: Remove, since a contributor who has not completed
	their assignment has contributed significantly more than 15 lines
	of code to this file.

2006-11-28  Juanma Barranquero  <[e-mail]>

	* erc.el (erc-cmd-BANLIST, erc-cmd-MASSUNBAN): Simplify.
	(erc-prompt-for-channel-key, erc-ignore-reply-list, erc-send-post-hook)
	(erc-active-buffer, erc-join-buffer, erc-frame-alist, erc-with-buffer)
	(erc-modules, erc-display-message-highlight, erc-process-input-line)
	(erc-cmd-HELP, erc-server-hooks, erc-echo-notice-in-user-buffers)
	(erc-format-my-nick, erc-echo-notice-in-user-and-target-buffers)
	(erc-echo-notice-in-first-user-buffer, erc-connection-established)
	(erc-update-user-nick, erc-update-channel-member, erc-highlight-notice)
	(erc-command-symbol, erc-add-query, erc-process-script-line)
	(erc-determine-parameters, erc-client-info, erc-popup-input-buffer):
	(erc-script-echo): Fix typos in docstrings.
	(erc-channel-user-op-p, erc-channel-user-voice-p, erc-startup-file-list)
	(define-erc-module, erc-once-with-server-event)
	(erc-once-with-server-event-global, erc-debug-irc-protocol)
	(erc-log-irc-protocol, erc-cmd-LOAD, erc-update-user)
	(erc-update-current-channel-member, erc-load-script):
	(erc-mode-line-away-status-format): Doc fixes.

2006-11-20  Andrea Russo  <[e-mail]>  (tiny change)

	* erc-dcc.el (erc-dcc-chat-setup): Initialize `erc-input-marker'
	before calling `erc-display-prompt'.

2006-11-24  Juanma Barranquero  <[e-mail]>

	* erc.el (erc-after-connect, erc-open-ssl-stream)
	(erc-display-line-1, erc-display-line):
	* erc-backend.el (005): Fix space/tab mixup in docstrings.

2006-11-20  Michael Olson  <[e-mail]>

	* erc.el (erc-version-string): Call this Version 5.2 stable
	pre-release, since it diverges slightly from our 5.2 branch, in
	that unstable features are not included.
	(erc-update-modules): Display better error message when module not
	found.

2006-11-12  Michael Olson  <[e-mail]>

	* erc-log.el: Save all log buffers when Emacs exits, in case
	someone ignores the warning about open processes.  Remove the
	advice code in the commentary.
	(erc-save-query-buffers): Docfix.
	(erc-log-save-all-buffers): New function that saves all ERC
	buffers to logs.
	(erc-current-logfile): Fix bug in filename selection, where the
	current buffer was erroneously being preferred over the given
	buffer.

2006-11-08  Michael Olson  <[e-mail]>

	* erc.el (erc-string-to-port): Avoid error when a numerical port
	is passed.  Thanks to Zekeriya KOÇ for the report.

2006-11-08  Łukasz Demianiuk  <[e-mail]>  (tiny change)

	* erc.el (erc-header-line): Fix typo.

2006-11-06  Juanma Barranquero  <[e-mail]>

	* erc-dcc.el (erc-dcc-send-file): Fix typo in error message.

	* erc.el (read-passwd):
	* erc-autoaway.el (erc-autoaway-reestablish-idletimer):
	* erc-truncate.el (truncate): Fix typo in docstring.

2006-10-21  Michael Olson  <[e-mail]>

	* erc.el (erc-iswitchb): Fix bug when hitting C-c C-b without
	first loading iswitchb.  Thanks to Leo for the report.

2006-10-10  Michael Olson  <[e-mail]>

	* erc.el (erc-default-port): Make the default be 6667 instead of
	ircd. since Mac OS X apparently has problems with looking up that
	port name.

	* erc-backend.el (353): Receive names after displaying the initial
	message, instead of before.

2006-10-05  Diane Murray  <[e-mail]>

	* erc.el (erc-my-nick-face): New face.
	(erc): Use FULL-NAME argument, not `erc-user-full-name'.  This
	fixes a bug where the :full-name argument passed to the function
	was not respected.
	(erc-format-my-nick): Use `erc-my-nick-face'.  This should help
	make it easier to find messages you sent in conversations when
	`erc-show-my-nick' is non-nil.
	(erc-compute-server): Doc fix.

2006-10-01  John J Foerch  <[e-mail]>  (tiny change)

	* erc-stamp.el (erc-insert-timestamp-right): Exclude the newline
	from the erc-timestamp field.

2006-09-11  Michael Olson  <[e-mail]>

	* erc-nicklist.el (erc-nicklist-insert-contents): Add missing
	parenthesis.  Thanks to Stephan Stahl for the report.

2006-09-10  Eric Hanchrow  <[e-mail]>  (tiny change)

	* erc.el (erc-cmd-IGNORE): Prompt user if this might be a regexp
	instead of a single user.

2006-09-10  Michael Olson  <[e-mail]>

	* erc.el (erc-generate-new-buffer-name): If this is a server
	buffer and a process exists already, create a new buffer.
	(erc-open): If the IRC session was continued, restore the old
	point.  Thanks to Stephan Stahl for the report.
	(erc-member-ignore-case): Coding style tweak.
	(erc-cmd-UNIGNORE): Quote the user before comparison.  If we don't
	find the user listed verbatim, try to match them against the list
	using string-match.  In this case, prompt as to whether the regexp
	should be removed.
	(erc-ignored-user-p): Remove CL-ism.

	* erc-autoaway.el (erc-autoaway-possibly-set-away): Check to see
	whether we are already away.

	* erc-menu.el: Fix potential compiler warning.

2006-09-07  Diane Murray  <[e-mail]>

	* erc.el: Updated Commentary and URL.
	(erc-iswitchb, erc-display-line, erc-set-modes, erc-update-modes)
	(erc-arrange-session-in-multiple-windows): No need to check if
	`erc-server-process' is bound.
	(erc-server-buffer-live-p): Doc fix.
	(erc-part-from-channel): Don't use any initial contents at prompt.
	(erc-format-nick, erc-format-@nick): Doc fix.  Use `when'.
	(s367): Fixed to support only banmask and channel which is the
	standard.  Also, there's no reason to add a message to each banned
	user entry trying to persuade the user to use /banlist instead of
	/mode #channel +b.  That part of the message was a little
	confusing, anyways.
	(s367-set-by): New catalog entry.  The user who set the ban and
	the time of ban seem to be specific to only certain servers such
	as freenode.

	* erc-autoaway.el (erc-autoaway-idletimer): Doc fix.

	* erc-backend.el (erc-server-process-alive): No need to check if
	`erc-server-process' is bound.
	(367): Use s367 or s367-set-by where appropriate.

	* erc-compat.el: Fixed URL.

	* erc-dcc.el: Updated copyright years.  Added Usage section.
	Changed supported Emacs version number from 21.3.50 to 22 in
	Commentary.

	* erc-ibuffer.el (erc-server-name, erc-target, erc-away): No need
	to check if `erc-server-process' is bound.

	* erc-nicklist.el: Added to the Commentary section an explanation
	that `erc-nicklist-quit' should be called from within the nicklist
	buffer.  Set file coding to utf-8 so a contributor's name is
	displayed correctly.
	(erc-nicklist-icons-directory): Use customize type directory
	instead of string.
	(erc-nicklist-insert-contents): Set bbdb-nick to an empty string
	if it wasn't found.  This fixes a bug where an error would occur
	when using `string=' on bbdb-nick if it was nil.

	* erc-replace.el: Removed URL from file information since it
	doesn't exist.

	* erc-sound.el: Updated copyright years.  Fixed Commentary and
	added Usage section.
	(define-erc-module): Add and remove `erc-ctcp-query-SOUND' to
	`erc-ctcp-query-SOUND-hook' here.  Removed the keybinding
	definitions.
	(erc-play-sound, erc-default-sound, erc-cmd-SOUND)
	(erc-ctcp-query-SOUND): Doc fix.
	(erc-play-command): Removed, not necessary anymore.
	(erc-ctcp-query-SOUND-hook): Set to nil as default.  Moved up
	higher in code, added docstring.
	(erc-play-sound): Use `play-sound-file'.  It exists in GNU Emacs
	as well since version 21 or earlier.  Removed commented-out older
	version of function.

	* NEWS: Fixed formatting, added channel tracking change.

2006-09-03  Diane Murray  <[e-mail]>

	* erc.el: M-x erc RET can now be used to start ERC.
	(erc-open): Renamed from `erc'.
	(erc-before-connect): Change erc-select to erc.
	(erc): Renamed from `erc-select'.  Use `erc-open'.
	(erc-select): Defined as alias of `erc'.
	(erc-ssl): Renamed from `erc-select-ssl'.  Use `erc'.
	(erc-select-ssl): Defined as alias of `erc-ssl'.
	(erc-cmd-SERVER): Use `erc'.
	(erc-query, erc-handle-irc-url): Use `erc-open'.

	* erc-backend.el (erc-process-sentinel-1, JOIN): Use `erc-open'.

	* erc-menu.el (erc-menu-definition): Use `erc'.

	* erc-networks.el: Updated copyright years.
	(erc-server-select): Use keyword arguments when calling `erc'.

	* erc.texi (Getting Started, Connecting): Changed erc-select to
	erc.

	* README: Changed erc-select to erc.

	* NEWS: Added note about these changes.

	* FOR-RELEASE: Marked this item as done.

2006-08-21  Diane Murray  <[e-mail]>

	* erc-track.el (erc-track-mode-line-mouse-face): New variable.
	(erc-make-mode-line-buffer-name): Add help-echo and mouse-face
	properties to channel name.

2006-08-20  Michael Olson  <[e-mail]>

	* erc-identd.el (erc-identd): New customization group.
	(erc-identd-port): New option that specifies the port to use if
	none is given as an argument to erc-identd-start.
	(identd): Place erc-identd-quickstart in erc-connect-pre-hook
	instead of erc-identd-start so that we deal with the different
	meaning of the first argument.
	(erc-identd-start): Use erc-identd-port.
	(erc-identd-quickstart): New function that ignores any arguments
	and calls erc-identd-start.

	* erc.el (erc-with-server-buffer): New macro that switches to the
	current ERC server buffer and runs some code.  If no server buffer
	is available, return nil.  This is a useful way to access
	variables in the server buffer.
	(erc-get-server-user, erc-add-server-user)
	(erc-remove-server-user, erc-change-user-nickname)
	(erc-get-server-nickname-list, erc-get-server-nickname-alist)
	(erc-ison-p, erc-active-buffer, erc-cmd-IGNORE)
	(erc-cmd-UNIGNORE, erc-cmd-IDLE, erc-cmd-NICK, erc-cmd-BANLIST)
	(erc-cmd-MASSUNBAN, erc-nickname-in-use, erc-ignored-user-p)
	(erc-format-channel-modes): Use it.
	(erc-once-with-server-event, erc-once-with-server-event-global)
	(erc-with-buffer, erc-with-all-buffers-of-server): Use make-symbol
	instead of gensym.
	(erc-open-server-buffer-p): New function that returns non-nil if
	the given buffer is an ERC server buffer that has an open IRC
	process.
	(erc-with-buffer): Use buffer-live-p here to set a good example,
	though it isn't really needed here.
	(erc-away): Mention erc-away-time.
	(erc): Don't propagate the erc-away setting, since it makes more
	sense to access it from the server buffer.  Set up the prompt
	before connecting rather than after.  Run erc-connect-pre-hook
	with the buffer as an argument, instead of no arguments.
	(erc-cmd-GAWAY): Use erc-open-server-buffer-p instead of
	erc-server-buffer-p so that only open connections are set away.
	(erc-cmd-GQUIT): Use erc-open-server-buffer-p.
	(erc-process-away): Docfix.  Don't set erc-away in channel
	buffers.
	(erc-set-current-nick): Make this uniform with the style used in
	erc-current-nick.
	(erc-away-time): Rename from erc-away-p, since this is no longer a
	boolean-style predicate.
	(erc-format-away-status): Use it.
	(erc-initialize-log-marker): Accept a `buffer' argument.
	(erc-connect-pre-hook): Docfix.
	(erc-connection-established): Make sure this runs in the correct
	buffer.
	(erc-set-initial-user-mode): Accept a `buffer' argument.

	* erc-stamp.el (erc-add-timestamp): Use erc-away-time.

	* erc-spelling.el (erc-spelling-init): Use
	erc-with-server-buffer.  Accept `buffer' argument.
	(spelling): Call erc-spelling-init with the `buffer' argument.

	* erc-speedbar.el (erc-speedbar-buttons): Use erc-server-buffer-p.

	* erc-pcomplete.el (pcomplete/erc-mode/UNIGNORE)
	(pcomplete-erc-all-nicks): Use erc-with-server-buffer.

	* erc-notify.el (erc-notify-timer, erc-cmd-NOTIFY): Use
	erc-with-server-buffer.

	* erc-networks.el (erc-network, erc-current-network)
	(erc-network-name): Use erc-with-server-buffer.

	* erc-netsplit.el (erc-cmd-WHOLEFT): Use erc-with-server-buffer.

	* erc-match.el (erc-log-matches, erc-log-matches-come-back): Use
	erc-away-time.

	* erc-log.el (log): Use erc-away-time.  Remove unnecessary check.
	Pass `buffer' argument to erc-log-setup-logging instead of setting
	the current buffer.  Ditto for erc-log-disable-logging.
	(erc-log-setup-logging, erc-log-disable-loggin): Accept a `buffer'
	argument.

	* erc-list.el (erc-chanlist): Use erc-with-server-buffer.

	* erc-ibuffer.el (erc-away): Use erc-away-time.

	* erc-dcc.el (erc-dcc-get-filter): Temporarily make the buffer
	read only instead of permanently doing so.

	* erc-compat.el (erc-gensym, *erc-sym-counter*): Remove, since
	Emacs Lisp has make-symbol, which is better.

	* erc-chess.el (erc-chess-handler, erc-cmd-CHESS): Use
	erc-with-server-buffer.

	* erc-capab.el (capab-identify): Only deal with server buffers
	that have an open IRC process.
	(erc-capab-identify-add-prefix): Use erc-with-server-buffer.

	* erc-backend.el (erc-server-connected): Docfix.  Recommend the
	`erc-server-process-alive' function.
	(erc-coding-system-for-target): Supply a default target if one is
	not given.
	(erc-server-send): Simplify slightly.
	(erc-call-hooks): Use erc-with-server-buffer.
	(erc-server-connect, erc-server-setup-periodical-ping): Accept
	`buffer' argument.

	* erc-autoaway.el (erc-autoaway-reestablish-idletimer): Move
	higher to avoid an automatic load snafu.
	(erc-autoaway-some-server-buffer): New function that returns an
	ERC server buffer with a live connection, or nil otherwise.
	(erc-autoaway-insinuate-maybe): New function that adds the
	autoaway reset function to post-command-hook if at least one ERC
	process is alive.
	(erc-autoaway-remove-maybe): New function that removes the
	autoaway reset function from post-command-hook if no ERC process
	is alive.
	(autoaway): Don't touch post-command-hook unless an IRC process is
	already open.  Remove our addition to post-command-hook as soon as
	there are no more IRC processes open.  Reset the indicators before
	connecting to an IRC server, which fixes a bug when re-connecting.
	(erc-autoaway-reset-idle-user): Call erc-autoaway-remove-maybe if
	there are no more IRC processes open.
	(erc-autoaway-set-back): Pick an open IRC process.  Accept an
	argument which is a function call if we can't find one.
	(erc-autoaway-some-open-server-buffer): New function which returns
	an ERC server buffer with an open connection and a user that is
	not away.
	(erc-autoaway-possibly-set-away, erc-autoaway-set-away): Use it.
	(erc-autoaway-set-away): Accept a `notest' argument which is used
	to avoid testing the same thing twice.
	(erc-autoaway-last-sent-time, erc-autoaway-caused-away): Move
	higher in file to fix byte-compile warning.

2006-08-20  Diane Murray  <[e-mail]>

	* erc-backend.el (erc-process-sentinel-1): Doc fix.  Let
	`erc-server-reconnect-p' check all condition cases.
	(erc-server-reconnect-p): Moved rest of checks from
	`erc-process-sentinel-1' to here.  Now takes an argument, EVENT.

2006-08-14  Diane Murray  <[e-mail]>

	* erc-menu.el: Updated copyright years.  Removed EmacsWiki URL.
	(erc-menu-definition): Name the menu "ERC" instead of "IRC" to
	avoid confusion with rcirc and other clients.

	* erc-backend.el (erc-server-banned): New variable.
	(erc-server-connect): Set `erc-server-banned' to nil.
	(erc-process-sentinel-1): Use `erc-server-reconnect-p'.
	(erc-server-reconnect-p): New function.  Return non-nil if the
	user wants automatic reconnects and if the user has not been
	banned from the server.  This should fix a bug where ERC gets into
	a loop trying to reconnect with no way to stop it when the user is
	denied access to the server due to a server ban.  It might also
	help when Tor users are blocked from freenode if freenode servers
	send the 465 message before disconnecting.
	(465): Handle "banned from server" error notices.

2006-08-13  Romain Francoise  <[e-mail]>

	* erc-match.el (erc-log-matches-make-buffer): End `y-or-n-p'
	prompt with a space.

2006-08-13  Michael Olson  <[e-mail]>

	* erc-backend.el (erc-server-timed-out): New variable that
	indicates whether the current connection has timed out due to
	failure to respond to a ping.
	(erc-server-send-ping): Set erc-server-timed-out to t.
	(erc-server-connect): Initialize erc-server-timed-out to nil.
	(erc-process-sentinel-1): Consult erc-server-timed-out.

2006-08-11  Michael Olson  <[e-mail]>

	* erc-fill.el (erc-fill): Skip any initial empty lines so that we
	avoid errors when inserting disconnect messages and other messages
	that begin with newlines.

2006-08-07  Michael Olson  <[e-mail]>

	* erc-backend.el (erc-process-sentinel-1): Use erc-display-message
	in several places instead of inserting text.
	(erc-process-sentinel): Move to the input-marker before removing
	the prompt.

	* erc.el (erc-port): Fix customization options.
	(erc-display-message): Handle null type explicitly.  Previously,
	this was relying on a chance side-effect.  Cosmetic indentation
	tweak.
	(english): Add 'finished and 'terminated entries to the catalog.
	Add initial and terminal newlines to 'disconnected and
	'disconnected-noreconnect entries.  Avoid long lines.
	(erc-cmd-QUIT): Bind the current erc-server-process to
	server-proc.  If the IRC server responds quickly, it is possible
	for the connection to close, and hence server buffer to be killed,
	if erc-kill-server-buffer-on-quit is non-nil.  This avoids that
	problem.

2006-08-06  Michael Olson  <[e-mail]>

	* erc-backend.el (erc-server-send-queue): Update from Circe
	version of this function.
	(erc-server-ping-timer-alist): New variable that keeps track of
	ping timers according to their associated server.
	(erc-server-last-received-time): New variable that specifies the
	time of the last message we received from the server.  This is
	used to detect hung processes.
	(erc-server-send-ping): New function that sends a ping to the IRC
	process corresponding with the given buffer.  Split from
	erc-server-setup-periodical-ping.  If the server buffer no longer
	exists, cancel the timer.  If the server process has not given us
	a message, including PING responses, since the last PING, kill it.
	This is necessary to deal with some aberrant freenode behavior.
	Idea taken from rcirc.
	(erc-server-setup-periodical-ping): Rename from
	erc-server-setup-periodical-server-ping.
	(erc-server-filter-function): Use erc-current-time instead of
	current-time.

	* erc.el (erc-arrange-session-in-multiple-windows): Fix bug with
	multi-tty Emacs.
	(erc-select-startup-file): Fix bug introduced by recent change.
	(erc-cmd-QUIT): If the IRC process has not terminated itself
	within 4 seconds of completing our quit-hook, kill it manually.
	Freenode in particular needs this.
	(erc-connection-established): Use erc-server-setup-periodical-ping
	instead of erc-server-setup-periodical-server-ping.

2006-08-05  Michael Olson  <[e-mail]>

	* erc-log.el (erc-log-standardize-name): New function that returns
	a filename that is safe for use for a log file.
	(erc-current-logfile): Use it.

	* erc.el (erc-startup-file-list): Search in ~/.emacs.d first,
	since that is a fairly standard directory.
	(erc-select-startup-file): Re-write to use
	convert-standard-filename, which will ensure that MS-DOS systems
	look for the _ercrc.el file.

2006-08-02  Michael Olson  <[e-mail]>

	* erc.el (erc-version-string): Release ERC 5.1.4.

	* Makefile, NEWS, erc.texi: Update for the 5.1.4 release.

	* erc.el (erc-active-buffer): Fix bug that caused messages to go
	to the wrong buffer.  Thanks to offby1 for the report.

	* erc-backend.el (erc-coding-system-for-target): Handle case where
	target is nil.  Thanks to Kai Fan for the patch.

2006-07-29  Michael Olson  <[e-mail]>

	* erc-log.el (erc-log-setup-logging): Don't offer to save the
	buffer.  It will be saved automatically killed.  Thanks to Johan
	Bockgård and Tassilo Horn for pointing this out.

2006-07-27  Johan Bockgård  <[e-mail]>

	* erc.el (define-erc-module): Make find-function and find-variable
	find the names constructed by `define-erc-module' in Emacs 22.

2006-07-14  Michael Olson  <[e-mail]>

	* erc-log.el (log): Make sure that we enable logging on
	already-opened buffers as well, in case the user toggles this
	module after loading ERC.  Also be sure to remove logging ability
	from all ERC buffers when the module is disabled.
	(erc-log-setup-logging): Set buffer-file-name to nil rather than
	the empty string.  This should fix some errors that occur when
	quitting Emacs without first killing all ERC buffers.
	(erc-log-disable-logging): New function that removes the logging
	ability from the current buffer.

	* erc-spelling.el (spelling): Use dolist and buffer-live-p.

2006-07-12  Michael Olson  <[e-mail]>

	* erc-match.el (erc-log-matches): Bind inhibit-read-only rather
	than call toggle-read-only.

	* erc.el (erc-handle-irc-url): Move here from erc-goodies.el and
	add autoload cookie.

2006-07-09  Michael Olson  <[e-mail]>

	* erc.el (erc-version-string): Release ERC 5.1.3.

	* erc.texi: Update for the 5.1.3 release.

	* erc-autoaway.el (erc-autoaway-set-back): Fix bug after returning
	from being set automatically away and current buffer is not an ERC
	buffer.

	* erc-identd.el: Fix compiler error.

	* erc.texi (Development): Use @subheading instead of @subsection.
	(Advanced Usage): Add menu.
	(Connecting): Fully document how to connect to an IRC server.
	(Options, Tips and Tricks, Sample Configuration): New unwritten
	sections.

	* erc.el (erc-server, erc-port, erc-nick, erc-nick-uniquifier)
	(erc-user-full-name, erc-password): Docfixes and customization
	interface tweaks.
	(erc-try-new-nick-p): Rename from
	`erc-manual-set-nick-on-bad-nick-p' and invert meaning.
	(erc-nickname-in-use): Use `erc-try-new-nick-p'.  Check the length
	of `erc-nick-uniquifier', in case someone wants multiple
	characters.
	(erc-compute-server, erc-compute-nick, erc-compute-full-name)
	(erc-compute-port): Docfixes.

	* erc-log.el (log): Move all add-hook calls here, rather than
	executing them immediately, and also cause them to be un-hooked
	when the module is removed.
	(erc-save-buffer-on-part): Move next to
	`erc-save-queries-on-quit'.
	(erc-save-buffer-on-quit, erc-save-queries-on-quit): Default to t.
	(erc-log-write-after-send, erc-log-write-after-insert): Default to
	nil.  This makes things fast, but reasonably failsafe, by default.

2006-07-08  Michael Olson  <[e-mail]>

	* erc-log.el (erc-log-insert-log-on-open): Make this nil by
	default, since most IRC clients don't do this.
	(erc-log-write-after-send): New option that determines whether the
	log file will be written to after every sent message.
	(erc-log-write-after-insert): New option that determines whether
	the log file will be written to when new text is added to a logged
	ERC buffer.
	(log): Use the aforementioned options.

	* erc.texi (Modules): Document the "completion" module.

	* erc-pcomplete.el (pcomplete-erc-nicks): Make sure that we don't
	have a nil element in the list when ignore-self is non-nil.

2006-07-05  Michael Olson  <[e-mail]>

	* erc.el (erc-modules): Use `set' instead of `set-default', since
	this setting should never be buffer-local.  Add the `page' module
	to the list.

	* erc.texi (Modules): Add entries for `list' and `page' modules.
	Change "spell" to "spelling".
	(History): Use past tense throughout.

2006-07-02  Michael Olson  <[e-mail]>

	* erc-backend.el (erc-call-hooks): Fix (stringp nil) error that
	can happen when doing /PART.

	* erc.el (erc-quit-reason-various-alist)
	(erc-part-reason-various-alist): In the example, use "^$" as an
	example, since "" matches anything.
	(erc-quit-reason-various, erc-part-reason-various): If no argument
	is given, and no matches are found, use our default reason instead
	of "nil".

2006-06-30  Michael Olson  <[e-mail]>

	* erc.texi (Modules): Mention identd.
	(Releases): Update mailing list address and download location.
	(Development): Refactor.  Provide updated directions for Arch.
	Make URLs clickable.
	(Keystroke Summary): Typo fix.  Use more Texinfo syntax.
	(Getting Started): Give simpler example.  We do not need to
	explicitly load every module.
	(History): Update.

	* erc-autoaway.el, erc-join.el, erc-backend.el, erc-bbdb.el:
	erc-button.el, erc-chess.el, erc-compat.el, erc-hecomplete.el:
	erc-dcc.el, erc-ezbounce.el, erc-fill.el, erc-ibuffer.el:
	erc-imenu.el, erc-list.el, erc-log.el, erc-match.el, erc-menu.el:
	erc-networks.el, erc-netsplit.el, erc-nicklist.el:
	erc-services.el, erc-pcomplete.el, erc-replace.el, erc-ring.el:
	erc-speedbar.el, erc-spelling.el, erc-stamp.el, erc-track.el:
	erc.el: Remove version strings.

	* erc.el (erc-cmd-SMV): Remove, since we do not have meaningful
	module versions anymore.
	(erc-version-modules): Remove, since we do not use this function
	anymore.
	(erc-latest-version, erc-ediff-latest-version): Remove, since this
	was only useful back when ERC consisted of one file.
	(erc-modules): Add line for identd.
	(erc-get-channel-mode-from-keypress): Typo fix.

	* erc-imenu.el: Remove unnecessary lines in header.

	* erc-goodies.el (erc-handle-irc-url): Docfix.

	* erc-identd.el: Define an ERC module for this.
	(erc-identd-start): Don't create a process buffer if possible.
	Otherwise, use conventional hidden names for process buffers.

2006-06-29  Michael Olson  <[e-mail]>

	* erc-backend.el (erc-coding-system-for-target): Match
	case-insensitively.  Use a pattern match instead of `assoc', as
	per the documentation for `erc-encoding-coding-alist'.

	* erc-track.el (erc-track-shorten-aggressively): Fix typo.

2006-06-27  Michael Olson  <[e-mail]>

	* erc.el: Update maintainer information and URLs.

2006-06-14  Michael Olson  <[e-mail]>

	* erc.el (erc-active-buffer): If the active buffer has been
	deleted, default to the server buffer.
	(erc-toggle-flood-control): When the user hits C-c C-f, make flood
	control really toggle, not unconditionally turn off.

2006-06-12  Michael Olson  <[e-mail]>

	* NEWS: Add items since the 5.1.2 release.

	* erc-autoaway.el (erc-autoaway-caused-away): New variable that
	indicates whether the current away status was caused by this
	module.
	(erc-autoaway-set-back): Only set back if this module set the user
	away.
	(erc-autoaway-set-away): Update `erc-autoaway-caused-away'.
	(erc-autoaway-reset-indicators): New function that resets some
	indicators when the user is no longer away.
	(autoaway): Add the above function to the 305 hook.

2006-06-05  Romain Francoise  <[e-mail]>

	* erc.texi (History): Fix various typos.

2006-06-04  Michael Olson  <[e-mail]>

	* erc-autoaway.el (erc-autoaway-idle-method): Move after the
	definition of the autoaway module.
	(autoaway): Don't do anything if erc-autoaway-idle-method is
	unbound.  This prevents an error on startup.

2006-06-03  Michael Olson  <[e-mail]>

	* erc-autoaway.el: Thanks to Mark Plaksin for the ideas and patch.
	(erc-autoaway-idle-method): Renamed from
	`erc-autoaway-use-emacs-idle'.  We have more than two choices for
	how to do this, so it's best to make this take symbol values.
	Improve documentation.  Remove warning against Emacs idle-time;
	the point is moot now that we get user idle time via a different
	method.  Make sure we disable and re-enable the module when
	changing this value.
	(autoaway): Conditionalize on the above option.  If using the idle
	timer or user idle methods, don't add anything to the
	send-completed or server-001 hooks, since it is unnecessary.
	(erc-autoaway-reestablish-idletimer, erc-autoaway-message):
	Docfix.
	(erc-autoaway-idle-seconds): Use erc-autoaway-idle-method.
	(erc-autoaway-reset-idle-irc): Renamed from
	`erc-autoaway-reset-idle'.  Don't pass line to
	`erc-autoaway-set-away', since it is not used.
	(erc-autoaway-reset-idle-user): New function that resets the idle
	state for user idle time.
	(erc-autoaway-set-back): Remove line argument, since it is not
	used.

2006-06-01  Michael Olson  <[e-mail]>

	* erc.el (erc-buffer-filter): Make sure all buffers returned from
	this are live.

2006-05-01  Edward O'Connor  <[e-mail]>

	* erc-goodies.el (erc-handle-irc-url): New function, suitable as
	a value for `url-irc-function'.

2006-04-18  Diane Murray  <[e-mail]>

	* erc-pcomplete.el (pcomplete-erc-nicks): Added new optional
	argument IGNORE-SELF.  If this is non-nil, don't return the user's
	current nickname.  Doc fix.
	(pcomplete/erc-mode/complete-command): Don't complete the current
	nickname.

2006-04-05  Diane Murray  <[e-mail]>

	* erc.el (erc-cmd-SV): Removed the exclamation point.  Show the
	build date as it's shown in `emacs-version'.

	* erc-capab.el (erc-capab-identify-add-prefix): Insert the prefix
	with the same face property as the previous character.

2006-04-02  Michael Olson  <[e-mail]>

	* erc-backend.el, erc-ezbounce.el, erc-join.el, erc-netsplit.el,
	erc.el: Make sure to include a newline inside of negated classes,
	so that a newline is not matched.

2006-04-01  Michael Olson  <[e-mail]>

	* erc-backend.el (erc-server-connect-function): Don't try to
	detect the existence of the `open-network-stream-nowait' function,
	since I can't find it in Emacs21, XEmacs21, or Emacs22.

2006-03-27  Michael Olson  <[e-mail]>

	* erc.texi: Update direntry.  Remove unneeded local variables.

2006-03-26  Michael Olson  <[e-mail]>

	* erc.el (erc-header-line): New face that will be used to colorize
	the text of the header-line, provided that
	`erc-header-line-face-method' is non-nil.
	(erc-prompt-face): Fix formatting.
	(erc-header-line-face-method): New option that determines the
	method used for colorizing header-line text.  This may be a
	function, nil, or non-nil.
	(erc-update-mode-line-buffer): Use the aforementioned option and
	face to colorize the header-line text, if that is what the user
	wants.
	(erc-send-input): If flood control is not activated, don't split
	the input line.

2006-03-25  Michael Olson  <[e-mail]>

	* erc.el (erc-cmd-QUOTE): Install patch from Aravind Gottipati
	that fixes the case where there is no leading whitespace.  Only
	remove the first space character, though.

	* erc-identd.el (erc-identd-start): Fix a bug by making sure that
	erc-identd-process is set properly.
	(erc-identd-start, erc-identd-stop): Add autoload cookies.
	(erc-identd-start): Pass :host parameter so this works with Emacs
	22.

2006-03-09  Diane Murray  <[e-mail]>

	* erc-button.el (erc-button-keymap): Use <backtab> rather than
	<C-tab> for `erc-button-previous' as it is a more standard key
	binding for this type of function.

2006-02-28  Diane Murray  <[e-mail]>

	* erc-capab.el: Removed things that were accidentally committed on
	2006-02-20.  Removed Todo section.
	(erc-capab-unidentified): Removed.

2006-02-26  Michael Olson  <[e-mail]>

	* erc-capab.el: Use (eval-when-compile (require 'cl)).
	(erc-capab-unidentified): Fix compiler warning by specifying
	group.

2006-02-20  Diane Murray  <[e-mail]>

	* erc-capab.el (erc-capab-send-identify-messages): Fixed comment
	to explain thoughts better.  `erc-server-parameters' is an
	associated list when it's set, not a string.

2006-02-19  Michael Olson  <[e-mail]>

	* erc-capab.el (erc-capab-send-identify-messages): Make sure some
	parameters are strings before using them.  Thanks to Alejandro
	Benitez for the report.

	* erc.el (erc-version-string): Release ERC 5.1.2.

2006-02-19  Diane Murray  <[e-mail]>

	* erc-button.el (erc-button-keymap): Bind `erc-button-previous' to
	<C-tab>.
	(erc-button-previous): New function.

2006-02-15  Michael Olson  <[e-mail]>

	* NEWS: Add category for ERC 5.2.

	* erc.el (erc): Move to the end of the buffer when a continued
	session is detected.  Thanks to e1f and indio for the report and
	testing a potential fix.

2006-02-14  Michael Olson  <[e-mail]>

	* debian/changelog: Prepare a new Debian package.

	* Makefile (debprepare): New rule that creates an ERC snapshot
	directory for use in both new Debian releases and revisions for
	Debian packages.
	(debrelease, debrevision-mwolson): Use debprepare.

	* NEWS: Bring up-to-date.

	* erc-stamp.el (erc-insert-timestamp-right): For now, put
	timestamps before rather than after erc-fill-column when
	erc-timestamp-right-column is nil.  This way we won't surprise
	anyone unpleasantly, or so it is hoped.

2006-02-13  Michael Olson  <[e-mail]>

	* erc-dcc.el: Use (eval-when-compile (require 'cl)).

2006-02-12  Michael Olson  <[e-mail]>

	* erc-autoaway.el, erc-dcc.el, erc-ezbounce.el, erc-fill.el
	* erc-goodies.el, erc-hecomplete.el, erc-ibuffer.el, erc-identd.el
	* erc-imenu.el, erc-join.el, erc-lang.el, erc-list.el, erc-log.el
	* erc-match.el, erc-menu.el, erc-netsplit.el, erc-networks.el
	* erc-notify.el, erc-page.el, erc-pcomplete.el, erc-replace.el
	* erc-ring.el, erc-services.el, erc-sound.el, erc-speedbar.el
	* erc-spelling.el, erc-track.el, erc-truncate.el, erc-xdcc.el:
	Add 2006 to copyright years, to comply with the changed guidelines.

2006-02-11  Michael Olson  <[e-mail]>

	* erc.el (erc-update-modules): Handle erc-capab-identify
	correctly.  Make some requirements shorter, so that it's easier to
	see why they are needed.

	* erc-capab.el: Add autoload cookie for capab-identify.
	(erc-capab-send-identify-messages, erc-capab-identify-activate):
	Minor whitespace fix in code.

	* erc-stamp.el (erc-timestamp-use-align-to): Renamed from
	`erc-timestamp-right-align-by-pixel'.  Set the default based on
	whether we are in Emacs 22, and using X.  Improve documentation.
	(erc-insert-aligned): Remove calculation of offset, since
	:align-to pos works after all.  Unlike the previous solution, this
	one works when erc-stamp.el is compiled.
	(erc-insert-timestamp-right): Don't add length of string, and then
	later remove its displayed width.  This puts timestamps after
	erc-fill-column when erc-timestamp-right-column is nil, rather
	than before it.  It also fixes a subtle bug.  Remove use of
	`current-window', since there is no variable by that name in
	Emacs21, Emacs22, or XEmacs21 beta.  Check to see whether
	`erc-fill-column' is non-nil before using it.

2006-02-11  Diane Murray  <[e-mail]>

	* erc-list.el: Define `list' module which sets the alias
	`erc-cmd-LIST' to `erc-list-channels' when enabled and
	`erc-list-channels-simple' when disabled.
	(erc-list-channels): Was `erc-cmd-LIST', renamed.
	(erc-list-channels-simple): New function.

	* erc.el (erc-modules): Added `list' to enabled modules.  Changed
	`capab-identify' description.  Moved customization options left in
	source code.

	* erc-menu.el (erc-menu-definition): Use `erc-list-channels'.

	* erc-capab.el: Put a little more detail into Usage section.
	(define-erc-module): Run `erc-capab-identify-setup' in all open
	server buffers when enabling.
	(erc-capab-identify-setup): Make PROC and PARSED optional
	arguments.
	(erc-capab-identify-add-prefix): Simplified nickname regexp.  This
	should now also match nicknames that are formatted differently
	than the default.

	* erc-spelling.el (define-erc-module): Make sure there's a buffer
	before calling `with-current-buffer'.

2006-02-10  Michael Olson  <[e-mail]>

	* Makefile (debbuild): Split from debrelease.
	(debrevision-mwolson): New rule that causes a Debian revision to
	be built.

	* erc.el (erc-migrate-modules): Use a better algorithm.  Thanks to
	Johan Bockgård.
	(erc-modules): Change use of 'pcomplete to 'completion.

2006-02-09  Diane Murray  <[e-mail]>

	* erc.el (erc-get-parsed-vector, erc-get-parsed-vector-nick)
	* erc-capab.el: Require erc.
	(erc-capab-send-identify-messages): Use `erc-server-send'.
	(erc-capab-identify-remove/set-identified-flag): Use 1 and 0 as
	the flags so we can also check whether the `erc-identified' text
	property is there at all.
	(erc-capab-identify-add-prefix): Use `erc-capab-find-parsed'.
	This fixes a bug where the prefix wasn't inserted when timestamps
	are inserted on the right.  Tweaked nickname regexp.
	(erc-capab-find-parsed): New function.
	(erc-capab-get-unidentified-nickname): Updated to check for 0
	flag.  Only get nickname if there's a nickuserhost associated with
	this message.

	* erc-capab.el: New file.  Adds the new module
	`erc-capab-identify', which allows flagging of unidentified users
	on servers running an ircd based on dancer - irc.freenode.net, for
	example.

	* erc.el (erc-modules): Added `capab-identify' to options.
	(erc-get-parsed-vector, erc-get-parsed-vector-nick)
	(erc-get-parsed-vector-type): Moved here from erc-match.el.

	* erc-match.el (erc-get-parsed-vector, erc-get-parsed-vector-nick)
	(erc-get-parsed-vector-type): Moved these functions to erc.el
	since they can be useful outside of the text matching module.

	* NEWS: Added erc-capab.el.

	* erc-dcc.el, erc-stamp.el, erc-xdcc.el: Changed "Emacs IRC Client"
	to "ERC".

2006-02-07  Michael Olson  <[e-mail]>

	* ChangeLog.01, ChangeLog.02, ChangeLog.03, ChangeLog.04,
	ChangeLog.05: Rename from ChangeLog.NNNN in order to disambiguate
	the filenames in DOS.

	* erc-goodies.el: Comment fix.

	* erc-hecomplete.el: Rename from erc-complete.el.  Update
	commentary.  Use define-erc-module so that it's possible to
	actually use this.
	(erc-hecomplete): Rename function from `erc-complete'.
	(erc-hecomplete): Rename group from `erc-old-complete'.  Docfix.

	* erc-join.el: Rename from erc-autojoin.el.

	* erc-networks.el: Rename from erc-nets.el.

	* erc-services.el: Rename from erc-nickserv.el.

	* erc-stamp.el (erc-insert-aligned): Don't take 3rd argument.  Use
	the simpler `indent-to' function when
	`erc-timestamp-right-align-by-pixel' is nil.
	(erc-insert-timestamp-right): If the timestamp goes on the
	following line, don't add timestamp properties to the spaces in
	front of it.

	* erc.el (erc-migrate-modules): New function that eases migration
	of module names.
	(erc-modules): Call erc-migrate-modules in the :get accessor.
	(erc-modules, erc-update-modules): Update for new modules names.
	(erc-cmd-SMV): Remove, since this does not give useful output due
	to the version strings being removed from ERC modules.

2006-02-05  Michael Olson  <[e-mail]>

	* erc-spelling.el (erc-spelling-init): If
	`erc-spelling-dictionaries' is nil, do not set
	ispell-local-dictionary.  Before, it was being set to nil, which
	was causing a long delay while the ispell process restarted.
	(erc-spelling-unhighlight-word): New function that removes
	flyspell properties from a spell-checked word.
	(erc-spelling-flyspell-verify): Don't spell-check nicks or words
	that have '/' before them.

2006-02-04  Michael Olson  <[e-mail]>

	* erc-autojoin.el: Use (eval-when-compile (require 'cl)).

	* erc-complete.el (erc-nick-completion-exclude-myself)
	(erc-try-complete-nick): Use better function for getting list of
	channel users.

	* erc-goodies.el: Docfix.

	* erc-stamp.el: Use new arch tagline, since the other one wasn't
	being treated properly.

	* erc.el (erc-version-string): Release ERC 5.1.1.

2006-02-03  Zhang Wei  <[e-mail]>

	* erc.el (erc-version-string): Don't hard-code Emacs version.
	(erc-version): Use emacs-version.

2006-01-31  Michael Olson  <[e-mail]>

	* erc-stamp.el: Update copyright years.

2006-01-30  Simon Josefsson  <[e-mail]>

	* erc.el (erc-open-ssl-stream): Use tls.el.

2006-01-30  Michael Olson  <[e-mail]>

	* erc-stamp.el (erc-timestamp-right-align-by-pixel): New option
	that determines whether to use pixel values to align right
	timestamps.  The default is not to do so, since it only works with
	Emacs22 on X, and even then some people have trouble.
	(erc-insert-aligned): Use `erc-timestamp-right-align-by-pixel'.

2006-01-29  Michael Olson  <[e-mail]>

	* ChangeLog, ChangeLog.2005, ChangeLog.2004, ChangeLog.2003,
	ChangeLog.2002, ChangeLog.2001: Add "See ChangeLog.NNNN" line for
	earlier changes.  Use utf-8 encoding.  Fix some accent typos.

	* erc-speedbar.el (erc-speedbar-buttons): Fix reference to free
	variable.
	(erc-speedbar-goto-buffer): Fix compiler warning.

	* erc-ibuffer.el: Use `define-ibuffer-filter' instead of
	`ibuffer-degine-limiter'.  Use `define-ibuffer-column' instead of
	`ibuffer-define-column'.  Require 'ibuf-ext so that the macros
	work without compiler warnings.

	* man/erc.texi (Obtaining ERC, Installation): Note that these
	sections may be skipped if using the version of ERC that comes
	with Emacs.

2006-01-29  Edward O'Connor  <[e-mail]>

	* erc-viper.el: Remove.  Now that ERC is included in Emacs, these
	work-arounds live in Viper itself.

2006-01-28  Michael Olson  <[e-mail]>

	* erc-*.el, erc.texi, NEWS: Add Arch taglines as per Emacs
	guidelines.

	* erc-*.el: Space out copyright years like the rest of Emacs.  Use
	the Emacs copyright statement.  Refer to ourselves as ERC rather
	than "Emacs IRC Client", since there are now several IRC clients
	for Emacs.

	* erc-compat.el (erc-emacs-build-time): Define as a variable.

	* erc-log.el (erc-log-setup-logging): Use write-file-functions.

	* erc-ibuffer.el: Require 'erc.

	* erc-stamp.el (erc-insert-aligned): Only use the special text
	property when window-system is X.

	* erc.texi: Adapt for inclusion in Emacs.

2006-01-28  Johan Bockgård  <[e-mail]>

	* erc.el (erc-format-message): More `cl' breakage; don't use
	`oddp'.

2006-01-27  Michael Olson  <[e-mail]>

	* debian/changelog: Update for new release.

	* debian/control (Description): Update.

	* debian/rules: Concatenate ChangeLog for 2005.

	* Makefile (MISC): Include ChangeLog.2005 and erc.texi.
	(debrelease, release): Copy images directory.

	* NEWS: Spelling fixes.  Add items for recent changes.

	* erc.el (erc): Move call to erc-update-modules before the call to
	erc-mode.  This should fix a timestamp display issue.
	(erc-version-string): Release ERC 5.1.

2006-01-26  Michael Olson  <[e-mail]>

	* erc-stamp.el (erc-insert-aligned): New function that inserts
	text in an perfectly-aligned way relative to the right margin.  It
	only works well with Emacs22.  A sane fallback is provided for
	other versions of Emacs.
	(erc-insert-timestamp-right): Use the new function.

2006-01-25  Edward O'Connor  <[e-mail]>

	* erc.el (erc-modules): Ensure that `erc-button-mode' gets enabled
	before `erc-match-mode'.

	* erc-match.el (match): Append `erc-match-message' to
	`erc-insert-modify-hook'.

2006-01-25  Michael Olson  <[e-mail]>

	* FOR-RELEASE: Mark last release requirement as done.

	* Makefile (realclean, distclean): Remove docs.

	* erc.texi: Take care of all pre-5.1 items.

	* erc-backend.el (erc-server-send, erc-server-send-queue): Wrap
	`process-send-string' in `condition-case' to avoid an error when
	quitting ERC.

	* erc-stamp.el (erc-insert-timestamp-right): Try to deal with
	variable-width characters in the timestamp and on the same line.
	The latter is a kludge, but it seems to work with most of the
	input I've thrown at it so far.  It's certainly better than going
	past the end of line consistently when we have variable-width
	characters on the same line.  When `erc-timestamp-intangible' is
	non-nil, add intangible properties to the whitespace as well, so
	that hitting <end> does what you'd expect.

	* erc.el (erc-flood-protect, erc-toggle-flood-control): Update
	this to only use boolean values for `erc-flood-protect'.  Update
	documentation.
	(erc-cmd-QUIT): Set the active buffer to be the server buffer, so
	that any QUIT-related messages go there.
	(erc): Try to be more clever about re-using channel buffers when
	automatically re-connecting.  Thanks to e1f for noticing.

2006-01-23  Michael Olson  <[e-mail]>

	* ChangeLog.2005: Remove erroneous line.

	* FOR-RELEASE: Make that the Makefile tweaking is complete.
	(NEWS): Mark as done.

	* Makefile (MANUAL): New option indicating the name of the manual.
	(PREFIX, ELISPDIR, INFODIR): New options that specify the
	directories to install lisp code and info manuals to.  PREFIX is
	used only by ELISPDIR and INFODIR.
	(all): Call `lisp' and create the manual.
	(lisp): Compile lisp code.
	(%.info, %.html): New rules that make Info files and HTML files,
	respectively, from a TexInfo source.
	(doc): Create both the Info and HTML versions of the manual.  This
	is for the user -- we never call it automatically.
	(install-info): Install Info files.
	(install-bin): Install compiled and source Lisp files.
	(todo): Remove, since it seems pointless.

	* NEWS: Update.

	* README: Add Installation instructions.  Tweak layout.

	* erc.texi: Work on some pre-5.1 items.

	* erc-stamp.el, erc-track.el: Move some functions and options in
	order to get rid of a few compiler warnings.

	* erc.el (erc-modules): Enable readonly by default.  This will
	prevent new users from accidentally removing old messages, which
	could be disconcerting.  Also enable stamp by default, since
	timestamps are a fairly standard feature among IRC clients.

	* erc-button.el: Munge whitespace.

	* erc-identd.el (erc-identd-start): Instead of throwing an error,
	just try to use the obsolete function.

2006-01-22  Michael Olson  <[e-mail]>

	* erc-backend.el (erc-decode-string-from-target): Make sure that
	we have a string as an argument.  If not, coerce it to the empty
	string.  Hopefully, this will work painlessly around an edge case
	related to quitting ERC around the same time a message comes in.

2006-01-22  Johan Bockgård  <[e-mail]>

	* erc-track.el: Use `(eval-when-compile (require 'cl))' (for
	`case').  Doc fixes.
	(erc-find-parsed-property): Simplify.
	(erc-track-get-active-buffer): Fix logic.  Simplify.
	(erc-track-switch-buffer): Remove unused variable `dir'.  Simplify.

	* erc-speak.el: Doc fixes.
	(erc-speak-region): `propertize' --> `erc-propertize'.

	* erc-dcc.el (erc-dcc-chat-parse-output): `propertize' -->
	`erc-propertize'.

	* erc-button.el (erc-button-add-button): Take erc-fill-prefix into
	account when wrapping URLs.

	* erc-bbdb.el (erc-bbdb-elide-display): Doc fix.

	* erc-backend.el (define-erc-response-handler): Doc fix.

2006-01-22  Michael Olson  <[e-mail]>

	* erc.el (erc-update-modules): Use `require' instead of `load',
	but prevent it from causing errors, in order to preserve the
	previous behavior.

2006-01-21  Michael Olson  <[e-mail]>

	* FOR-RELEASE (Source): Mark cl task as done.

	* Makefile (erc-auto.el): Call erc-generate-autoloads rather than
	generate-autoloads.
	(erc-auto.el, %.elc): Don't show command, just its output.

	* NEWS: Add items from 2005-01-01 to 2005-08-13.

	* debian/copyright (Copyright): Update.

	* erc-auto.in (erc-generate-autoloads): Rename from
	generate-autoloads.

	* erc.el, erc-autoaway.el, erc-backend.el: Use
	erc-server-process-alive instead of erc-process-alive.

	* erc.el, erc-backend.el, erc-ezbounce.el, erc-list.el,
	erc-log.el, erc-match.el, erc-nets.el, erc-netsplit.el,
	erc-nicklist.el, erc-nickserv.el, erc-notify.el, erc-pcomplete.el:
	Use (eval-when-compile (require 'cl)), so that compilation doesn't
	fail.

	* erc-fill.el, erc-truncate.el: Whitespace munging.

	* erc.el: Update copyright notice.  Remove eval-after-load code.
	(erc-with-buffer): Docfix.
	(erc-once-with-server-event, erc-once-with-server-event-global)
	(erc-with-buffer, erc-with-all-buffers-of-server): Use erc-gensym
	instead of gensym.
	(erc-banlist-update): Use erc-delete-if instead of delete-if.
	(erc): Call `erc-update-modules' here.

	* erc-backend.el: Require 'erc-compat to minimize compiler
	warnings.
	(erc-decode-parsed-server-response): Docfix.
	(erc-server-process-alive): Move here from erc.el and rename from
	`erc-process-alive'.
	(erc-server-send, erc-remove-channel-users): Make sure process is
	alive before sending data to it.

	* erc-bbdb.el: Update copyright years.
	(erc-bbdb-whois): Remove overexuberant comment.

	* erc-button.el: Require erc-fill, since we make liberal use of
	`erc-fill-column'.

	* erc-compat.el (erc-const-expr-p, erc-list*, erc-assert): New
	functions, the latter of which provides an `assert' equivalent.
	(erc-remove-if-not): New function that provides a simple
	implementation of `remove-if-not'.
	(erc-gensym): New function that provides a simple implementation
	of `gensym'.
	(erc-delete-if): New function that provides a simple
	implementation of `delete-if'.
	(erc-member-if): New function that provides a simple
	implementation of `member-if'.
	(field-end): Remove this, since it is unused, and later versions
	of XEmacs have this function already.
	(erc-function-arglist): Moved here from erc.el.
	(erc-delete-dups): New compatibility function for dealing with
	XEmacs.
	(erc-subseq): New function copied from cl-extra.el.

	* erc-dcc.el: Require pcomplete during compilation to avoid
	compiler warnings.
	(erc-unpack-int, erc-dcc-send-filter)
	(erc-dcc-get-filter): Use erc-assert instead of assert.
	(pcomplete/erc-mode/DCC): Use erc-remove-if-not instead of
	remove-if-not.

	* erc-match.el (erc-log-matches): Fix compiler warning.

	* erc-nicklist.el: Update copyright notice.
	(erc-nicklist-menu): Change use of caadr to (car (cadr ...)).
	(erc-nicklist-bitlbee-connected-p): Remove.
	(erc-nicklist-insert-medium-name-or-icon): Accept channel
	argument.  Use it to determine whether we are on bitlbee.  Now
	that bitlbee names its channel "&bitlbee", this is trivial.
	(erc-nicklist-insert-contents): Pass channel as specified above.
	Don't try to determine whether we are on bitlbee here.
	(erc-nicklist-channel-users-info): Use erc-remove-if-not instead
	of remove-if-not.
	(erc-nicklist-search-for-nick): Use erc-member-if instead of
	member-if.

	* erc-notify.el (erc-notify-QUIT): Use erc-delete-if with a
	partially-evaluated lambda expression instead of `delete' and
	`find'.

	* erc-track.el: Use erc-assert.
	(erc-track-modified-channels): Remove use of `return'.
	(erc-track-modified-channels): Use `cadr' instead of `second',
	since otherwise we would need yet another eval-when-compile line.

2006-01-19  Michael Olson  <[e-mail]>

	* erc-backend.el (erc-process-sentinel-1): Remove attempt to
	detect SIGPIPE, since it doesn't work.

2006-01-10  Diane Murray  <[e-mail]>

	* erc-spelling.el: Updated copyright years.
	(define-erc-module): Enable/disable `flyspell-mode' for all open
	ERC buffers as well.
	(erc-spelling-dictionaries): Reworded customize description.

	* erc.el (erc-command-symbol): New function.
	(erc-extract-command-from-line): Use `erc-command-symbol'.  This
	fixes a bug where "Symbol's function definition is void:
	erc-cmd-LIST" would be shown after typing /list at the prompt (the
	command was interned because erc-menu.el uses it and is enabled by
	default whereas erc-list.el is not).

	* NEWS: Started a list of renamed variables.

	* erc.el: Reworded the message sent when defining variable
	aliases.
	(erc-command-indicator-face): Doc fix.
	(erc-modules): Enable the match module by default which makes
	current nickname highlighting on as the default.

	* erc-button.el: Updated copyright years.
	(erc-button): New face.
	(erc-button-face): Use `erc-button'.
	(erc-button-nickname-face): New customizable variable.
	(erc-button-add-nickname-buttons, erc-button-add-buttons-1): Send
	new argument to `erc-button-add-button'.
	(erc-button-add-button): Doc fix.  Added new argument to function
	definition, NICK-P.  If it's a nickname, use
	`erc-button-nickname-face', otherwise use `erc-button-face'.  This
	makes channel tracking and buttons work better together when
	`erc-button-buttonize-nicks' is enabled, since there is a nickname
	on just about every line.

	* erc-track.el (erc-track-use-faces): Doc fix.
	(erc-track-faces-priority-list): Added `erc-button' to list.
	(erc-track-priority-faces-only): Doc fix.

2006-01-09  Diane Murray  <[e-mail]>

	* erc-button.el (erc-button-url-regexp): Use `concat' so the
	regexp is not one long line.
	(erc-button-alist): Fixed so that customizing works correctly.
	Reorganized.  Removed lambda functions with more than two lines.
	Doc fix.
	(erc-button-describe-symbol, erc-button-beats-to-time): New
	functions.  Moved from `erc-button-alist'.

2006-01-07  Michael Olson  <[e-mail]>

	* erc-backend.el (erc-process-sentinel-1): Don't try to re-open a
	process if a SIGPIPE occurs.  This happens when a new message
	comes in at the same time a /quit is requested.
	(erc-process-sentinel): Use string-match rather than string= to do
	these comparisons.  Matching literal newlines makes me nervous.

	* erc-track.el (erc-track-remove-from-mode-line): Handle case
	where global-mode-string is not a list.  Emacs22 permits this.


See ChangeLog.05 for earlier changes.

    Copyright (C) 2006, 2007 Free Software Foundation, Inc.

  This file is part of GNU Emacs.

  GNU Emacs is free software; you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation; either version 3, or (at your option)
  any later version.

  GNU Emacs is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with GNU Emacs; see the file COPYING.  If not, write to the
  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
  Boston, MA 02110-1301, USA.

;; Local Variables:
;; coding: utf-8
;; add-log-time-zone-rule: t
;; End:

;; arch-tag: 865a75f6-2bcb-46df-bf0c-b514dadf688a