comparison etc/edt-user.doc @ 49600:23a1cea22d13

Trailing whitespace deleted.

49599:5ade352e8d1c

Enhancements section below for the details.


Quick Start:

To start the EDT Emulation, first start Emacs and then enter 

   M-x edt-emulation-on
   
to begin the emulation.  After initialization is complete, the
following message will appear below the status line informing you
that the emulation has been enabled: "Default EDT keymap active".

   You can have the EDT Emulation start up automatically, each time

edt-user.doc     - User Instructions and Sample Customization File
edt.el           - EDT Emulation Functions and Default Configuration
edt-lk201.el     - Built-in support for DEC LK-201 Keyboards
edt-vt100.el     - Built-in support for DEC VT-100 (and above) terminals
edt-pc.el        - Built-in support for PC 101 Keyboards under MS-DOS
edt-mapper.el    - Create an EDT LK-201 Map File for Keyboards Without 
                     Built-in Support

Enhancements:

Version 4.0 contains the following enhancements:

     window.  To change these settings, you can invoke the function
     edt-set-scroll-margins in your .emacs file.  For example, the
     following line

          (edt-set-scroll-margins "20%" "25%")
      
     sets the top margin to 20% of the window and the bottom margin
     to 25% of the window.  To disable this feature, set each
     margin to 0%.  You can also invoke edt-set-scroll-margins
     interactively while EDT Emulation is active to change the
     settings for that session.

     NOTE: Another way to set the scroll margins is to use the
     Emacs customization feature (not available in Emacs 19) to set
     the following two variables directly:
      
          edt-top-scroll-margin and edt-bottom-scroll-margin

     Enter the Emacs `customize' command.  First select the Editing
     group and then select the Emulations group.  Finally, select
     the Edt group and follow the directions.
      
 2.  The SUBS command is now supported and bound to GOLD-Enter by
     default.  (This design was copied from tpu-edt.el.)  Note, in
     earlier versions of EDT Emulation, GOLD-Enter was assigned to
     the Emacs function `query-replace'.  The binding of
     `query-replace' has been moved to GOLD-/.  If you prefer to

Goals:

        1.  Emulate EDT Keypad Mode commands closely so that current EDT users
            will find that it easy and comfortable to use GNU Emacs with a
            small learning curve;
   
        2.  Make it easy for a user to customize EDT emulation key bindings
            without knowing much about Emacs Lisp;

        3.  Make it easy to switch between the original EDT default bindings
            and the user's customized EDT bindings, without having to exit

        4.  Provide support for some TPU/EVE functions not supported in EDT.

        5.  Provide an easy way to restore ALL original Emacs key bindings,
            just as they existed before the EDT emulation was first invoked.
   
        6.  Support GNU Emacs 19 and higher.  (GNU Emacs 18 and below is no
	        longer supported.)  XEmacs 19, and above, is also supported.

        7.  Supports highlighting of marked text within the EDT emulation on
            all platforms on which Emacs supports highlighting of marked text.

In character oriented connections not running a window manager, built-in
support for the following terminals/keyboards is provided:

  (1) DEC VT-100 series and higher.  This includes well behaved VT clones and
      emulators.  If you are using a VT series terminal, be sure that the term
      environment variable is set properly before invoking emacs. 

  (2) PC AT keyboard under MS-DOS.  

Be sure to read the SPECIAL NOTES FOR SOME PLATFORMS sections to see if those
notes apply to you.



     keys.  It is difficult to emulate the full EDT keypad and still retain use
     of the arrow keys on such keyboards.

     The Sun Type 5 and other more recent Sun keyboards, however, do have
     separate arrow keys.  This makes them candidates for setting up a
     reasonable EDT keypad emulation.  

     Depending upon the configuration of the version of X installed on your
     system, you may find the default X keynames for the keypad keys don't
     permit Emacs to interpret some or all the keypad keys as something other
     than arrow keys, numeric keys, Home, PgUP, etc.  Both Sun and HP have been
     particularly guilty of making bizarre keysym assignments to the keypad
     keys. 

     In most cases, the X Windows command, xmodmap, can be used to correct the
     problem.  Here's a sample .xmodmaprc file which corrects this problem on
     one Sun workstation configuration using an older SunOS release configured
     with a Sun Type 5 keyboard:

         keycode 105 = F24

     changes the X Windows name of the keypad NumLock key to be known
     internally as the F24 key.  Doing so permits it to be configured to behave
     as the PF1 (Gold) key.  

     The side effect of this change is that you will no longer have a NumLock
     key.  If you are using other software under X which requires a NumLock
     key, then examine your keyboard and look for one you don't use and
     redefine it to be the NumLock key.  Basically, you need to clear the

     turning it on or off, as the case may be, then try again.  If this doesn't
     solve your problem, you may have to modify the X keysym mappings with
     xmodmap.

     On one distribution on an Intel PC, the following .xmodmaprc set things up
     nicely.  

         ! File:  .xmodmaprc
         !
         ! Set up PC keypad under GNU/Linux for the GNU Emacs EDT Emulation 
         !
	 clear  mod2
	 keycode  77 = F12
	 keycode  96 = Num_Lock Pointer_EnableKeys
	 add mod2 = Num_Lock

     The .xmodmaprc file looks like this:

         ! File:  .xmodmaprc
         !
         ! Set up PC keypad under GNU/Linux for the GNU Emacs EDT Emulation 
         !
	 clear  mod2
	 keycode  77 = F12
	 keycode  96 = Num_Lock Pointer_EnableKeys
	 add mod2 = Num_Lock

     F12 key looks like a Num_Lock keypress to X.  Also, a press of the
     physical NumLock key looks like a press of the F12 key to X.

     Now, edt-mapper.el will see "f12" when the physical NumLock key
     is pressed, allowing the NumLock key to be used as the EDT PF1
     (Gold) key. 

V.    HOW DOES THIS EDT EMULATION DIFFER FROM REAL EDT?:

In general, you will find that this emulation of EDT replicates most, but not
all, of EDT's most used Keypad Mode editing functions and behavior.  It is not
perfect, but most EDT users who have tried the emulation agree that it is
quite good enough to make it easy for die-hard EDT users to move over to using
GNU Emacs.  

Here's a list of the most important differences between EDT and this GNU Emacs
EDT Emulation.  The list is short but you must be aware of these differences
if you are to use the EDT Emulation effectively.

    provided to do just that.  When invoked, it prompts you to press the key
    to which you wish the last replaced key definition restored.  It is bound
    to GOLD C-k in the default EDT mode when EDT control sequence bindings are
    enabled or one of the sample edt-user.el customization files is used.

2.  Direction support is fully supported.  

3.  All original Emacs bindings are fully restored when EDT emulation is turned
    off.  So, if a fellow worker comes over to your terminal to help you with a
    software problem, for example, and is completely confused by your EDT
    emulation bindings, just enter the command, edt-emulation-off, at the M-x

    are bound to F7, F8, GOLD-F8, F9, GOLD-F9, F10, and GOLD-F10 in the
    default EDT mode.

15. The original EDT emulation package set up many default regular and GOLD
    bindings.  We tried to preserve most (but not all!) of these, so users of
    the original emulation package will feel more at home.  

    Nevertheless, there are still many GOLD key sequences which are not bound
    to any functions.  These are prime candidates to use for your own 
    customizations.  
    
    Also, there are several commands in edt.el not bound to any key.  So, you
    will find it worthwhile to look through edt.el for functions you may wish
    to add to your personal customized bindings.

16. The VT200/VT300 series terminals steal the function keys F1 to F5 for

First, you need to have your own private lisp directory, say ~/lisp, and
you should add it to the GNU Emacs load path.

NOTE:  A few sites have different load-path requirements, so the above
       directions may need some modification if your site has such special
       needs. 


Creating your own edt-user.el file:

A sample edt-user.el file is attached to the end of this user documentation.
You should use it as a guide to learn how you can customize EDT emulation
bindings to your own liking.  Names used to identify the set of LK-201
keypad and function keys are:

Keypad Keys:   
                PF1 PF2 PF3 PF4
                KP7 KP8 KP9 KP-
                KP4 KP5 KP6 KP,
                KP1 KP2 KP3 
                KP0     KPP KPE

Arrow Keys:
                LEFT RIGHT DOWN UP

Function Keys:
                F1 F2 F3 F4 F5  F6 F7 F8 F9 F10  F11 F12 F13 F14
                HELP DO  F17 F18 F19 F20

                FIND   INSERT   REMOVE 
                SELECT PREVIOUS NEXT

Note:
                Many VT-200 terminals, and above, steal function keys F1 thru
                F5 for terminal setup control and don't send anything to the

with the top margin set to 10% of the window and the bottom margin set to 15%
of the window.  To change these settings, you can invoke the function
edt-set-scroll-margins in your .emacs file.  For example, the following line

          (edt-set-scroll-margins "20%" "25%")
      
sets the top margin to 20% of the window and the bottom margin to 25% of the
window.  To disable this feature, set each margin to 0%.  You can also invoke
edt-set-scroll-margins interactively while EDT Emulation is active to change
the settings for that session.

NOTE: Another way to set the scroll margins is to use the Emacs customization
feature (not available in Emacs 19) to set the following two variables
directly:
      
          edt-top-scroll-margin and edt-bottom-scroll-margin

Enter the Emacs `customize' command.  First select the Editing group and then
select the Emulations group.  Finally, select the Edt group and follow the
directions.

 G-F8: Paste Rect Overstrike      |   (UP)   |  (DOWN)  |  (LEFT)  | (RIGHT)  |
   F9: Cut Rect Insert            |Window Top|Window Bot|Bkwd Sent |Frwd Sent |
 G-F9: Paste Rect Insert          +----------+----------+----------+----------+
  F10: Cut Rectangle
G-F10: Paste Rectangle
  F11: ESC                       
  F12: Beginning of Line          +----------+----------+----------+----------+
G-F12: Delete Other Windows       |   GOLD   |   HELP   |  FNDNXT  |  DEL L   |
  F13: Delete to Begin of Word    |   (PF1)  |   (PF2)  |   (PF3)  |  (PF4)   |
 HELP: Keypad Help                |Mark Wisel|Desc Funct|   FIND   |  UND L   |
G-HELP: Emacs Help                +----------+----------+----------+----------+

  C-r: Isearch Backward           +---------------------+----------+  (ENTER) |
  C-s: Isearch Forward            |         LINE        |  SELECT  |          !
  C-t: Display the Time           |         (0)         |    (.)   |   Query  |
  C-u: Delete to Begin of Line    |      Open Line      |  RESET   |  Replace |
  C-v: Redraw Display             +---------------------+----------+----------+
  C-w: Set Screen Width 132       
  C-z: Suspend Emacs                    +----------+----------+----------+
G-C-\: Split Window                     |  FNDNXT  |   Yank   |   CUT    |
                                        |  (FIND)  | (INSERT) | (REMOVE) |
  G-b: Buffer Menu                      |   FIND   |          |   COPY   |
  G-c: Compile                          +----------+----------+----------+

  G- : Undo  (GOLD Spacebar)
  G-=: Go to Line
  G-`: What line
  G-/: Query-Replace

;;; File:  edt-user.el   ---  Sample User Customizations for the Enhanced 
;;;                             EDT Keypad Mode Emulation 
;;;                             
;;;                      For GNU Emacs 19 and Above
;;;
;; Copyright (C) 1986, 1992, 1993, 2000 Free Software Foundation, Inc.

;; Author: Kevin Gallagher <[e-mail]>

  (edt-bind-function-key "KP1" 'edt-word-forward 'edt-change-case)
  (edt-bind-function-key "KP3" 'edt-word-backward 'edt-copy)
  (edt-bind-function-key "KP6" 'edt-cut-or-copy 'yank)
  (edt-bind-function-key "KP8" 'edt-scroll-window 'fill-paragraph)
  (edt-bind-function-key "KP9" 'open-line 'edt-eliminate-all-tabs)
  (edt-bind-function-key "KPP" 
			 'edt-toggle-select 'edt-line-to-middle-of-window)
  (edt-bind-function-key "KPE" 'edt-change-direction 'overwrite-mode)

  ;; GOLD bindings for regular keys.
  (edt-bind-gold-key "a" 'edt-append)

                                  +----------+----------+----------+----------+
   F7: Copy Rectangle             |Prev Line |Next Line |Bkwd Char |Frwd Char |
   F8: Cut Rect Overstrike        |   (UP)   |  (DOWN)  |  (LEFT)  | (RIGHT)  |
 G-F8: Paste Rect Overstrike      |Window Top|Window Bot|Bkwd Sent |Frwd Sent |
   F9: Cut Rect Insert            +----------+----------+----------+----------+
 G-F9: Paste Rect Insert         
  F10: Cut Rectangle
G-F10: Paste Rectangle
  F11: ESC                        +----------+----------+----------+----------+
  F12: Beginning of Line          |   GOLD   |Query Repl|  FNDNXT  |Del Ent L |
G-F12: Delete Other Windows       |   (PF1)  |   (PF2)  |   (PF3)  |   (PF4)  |

  C-i: Indent for Tab             +---------------------+----------+  (ENTER) |
  C-j: Duplicate Word             |         LINE        |SELECT/RES|          |
  C-k: Define Key                 |         (0)         |    (.)   |  Toggle  |
G-C-k: Restore Key                |      Open Line      |Center Lin|Insrt/Over|
  C-l: Learn                      +---------------------+----------+----------+
  C-n: Set Screen Width 80       
  C-o: Open Line                       +----------+----------+----------+
  C-p: Fill Paragraph                  |  FNDNXT  |   Yank   |    CUT   |
  C-q: Quoted Insert                   |  (FIND)) | (INSERT) | (REMOVE) |
  C-r: Isearch Backward                |   FIND   |          |   COPY   |
  C-s: Isearch Forward                 +----------+----------+----------+

49600:23a1cea22d13

Enhancements section below for the details.


Quick Start:

To start the EDT Emulation, first start Emacs and then enter

   M-x edt-emulation-on

to begin the emulation.  After initialization is complete, the
following message will appear below the status line informing you
that the emulation has been enabled: "Default EDT keymap active".

   You can have the EDT Emulation start up automatically, each time

edt-user.doc     - User Instructions and Sample Customization File
edt.el           - EDT Emulation Functions and Default Configuration
edt-lk201.el     - Built-in support for DEC LK-201 Keyboards
edt-vt100.el     - Built-in support for DEC VT-100 (and above) terminals
edt-pc.el        - Built-in support for PC 101 Keyboards under MS-DOS
edt-mapper.el    - Create an EDT LK-201 Map File for Keyboards Without
                     Built-in Support

Enhancements:

Version 4.0 contains the following enhancements:

     window.  To change these settings, you can invoke the function
     edt-set-scroll-margins in your .emacs file.  For example, the
     following line

          (edt-set-scroll-margins "20%" "25%")

     sets the top margin to 20% of the window and the bottom margin
     to 25% of the window.  To disable this feature, set each
     margin to 0%.  You can also invoke edt-set-scroll-margins
     interactively while EDT Emulation is active to change the
     settings for that session.

     NOTE: Another way to set the scroll margins is to use the
     Emacs customization feature (not available in Emacs 19) to set
     the following two variables directly:

          edt-top-scroll-margin and edt-bottom-scroll-margin

     Enter the Emacs `customize' command.  First select the Editing
     group and then select the Emulations group.  Finally, select
     the Edt group and follow the directions.

 2.  The SUBS command is now supported and bound to GOLD-Enter by
     default.  (This design was copied from tpu-edt.el.)  Note, in
     earlier versions of EDT Emulation, GOLD-Enter was assigned to
     the Emacs function `query-replace'.  The binding of
     `query-replace' has been moved to GOLD-/.  If you prefer to

Goals:

        1.  Emulate EDT Keypad Mode commands closely so that current EDT users
            will find that it easy and comfortable to use GNU Emacs with a
            small learning curve;

        2.  Make it easy for a user to customize EDT emulation key bindings
            without knowing much about Emacs Lisp;

        3.  Make it easy to switch between the original EDT default bindings
            and the user's customized EDT bindings, without having to exit

        4.  Provide support for some TPU/EVE functions not supported in EDT.

        5.  Provide an easy way to restore ALL original Emacs key bindings,
            just as they existed before the EDT emulation was first invoked.

        6.  Support GNU Emacs 19 and higher.  (GNU Emacs 18 and below is no
	        longer supported.)  XEmacs 19, and above, is also supported.

        7.  Supports highlighting of marked text within the EDT emulation on
            all platforms on which Emacs supports highlighting of marked text.

In character oriented connections not running a window manager, built-in
support for the following terminals/keyboards is provided:

  (1) DEC VT-100 series and higher.  This includes well behaved VT clones and
      emulators.  If you are using a VT series terminal, be sure that the term
      environment variable is set properly before invoking emacs.

  (2) PC AT keyboard under MS-DOS.

Be sure to read the SPECIAL NOTES FOR SOME PLATFORMS sections to see if those
notes apply to you.



     keys.  It is difficult to emulate the full EDT keypad and still retain use
     of the arrow keys on such keyboards.

     The Sun Type 5 and other more recent Sun keyboards, however, do have
     separate arrow keys.  This makes them candidates for setting up a
     reasonable EDT keypad emulation.

     Depending upon the configuration of the version of X installed on your
     system, you may find the default X keynames for the keypad keys don't
     permit Emacs to interpret some or all the keypad keys as something other
     than arrow keys, numeric keys, Home, PgUP, etc.  Both Sun and HP have been
     particularly guilty of making bizarre keysym assignments to the keypad
     keys.

     In most cases, the X Windows command, xmodmap, can be used to correct the
     problem.  Here's a sample .xmodmaprc file which corrects this problem on
     one Sun workstation configuration using an older SunOS release configured
     with a Sun Type 5 keyboard:

         keycode 105 = F24

     changes the X Windows name of the keypad NumLock key to be known
     internally as the F24 key.  Doing so permits it to be configured to behave
     as the PF1 (Gold) key.

     The side effect of this change is that you will no longer have a NumLock
     key.  If you are using other software under X which requires a NumLock
     key, then examine your keyboard and look for one you don't use and
     redefine it to be the NumLock key.  Basically, you need to clear the

     turning it on or off, as the case may be, then try again.  If this doesn't
     solve your problem, you may have to modify the X keysym mappings with
     xmodmap.

     On one distribution on an Intel PC, the following .xmodmaprc set things up
     nicely.

         ! File:  .xmodmaprc
         !
         ! Set up PC keypad under GNU/Linux for the GNU Emacs EDT Emulation
         !
	 clear  mod2
	 keycode  77 = F12
	 keycode  96 = Num_Lock Pointer_EnableKeys
	 add mod2 = Num_Lock

     The .xmodmaprc file looks like this:

         ! File:  .xmodmaprc
         !
         ! Set up PC keypad under GNU/Linux for the GNU Emacs EDT Emulation
         !
	 clear  mod2
	 keycode  77 = F12
	 keycode  96 = Num_Lock Pointer_EnableKeys
	 add mod2 = Num_Lock

     F12 key looks like a Num_Lock keypress to X.  Also, a press of the
     physical NumLock key looks like a press of the F12 key to X.

     Now, edt-mapper.el will see "f12" when the physical NumLock key
     is pressed, allowing the NumLock key to be used as the EDT PF1
     (Gold) key.

V.    HOW DOES THIS EDT EMULATION DIFFER FROM REAL EDT?:

In general, you will find that this emulation of EDT replicates most, but not
all, of EDT's most used Keypad Mode editing functions and behavior.  It is not
perfect, but most EDT users who have tried the emulation agree that it is
quite good enough to make it easy for die-hard EDT users to move over to using
GNU Emacs.

Here's a list of the most important differences between EDT and this GNU Emacs
EDT Emulation.  The list is short but you must be aware of these differences
if you are to use the EDT Emulation effectively.

    provided to do just that.  When invoked, it prompts you to press the key
    to which you wish the last replaced key definition restored.  It is bound
    to GOLD C-k in the default EDT mode when EDT control sequence bindings are
    enabled or one of the sample edt-user.el customization files is used.

2.  Direction support is fully supported.

3.  All original Emacs bindings are fully restored when EDT emulation is turned
    off.  So, if a fellow worker comes over to your terminal to help you with a
    software problem, for example, and is completely confused by your EDT
    emulation bindings, just enter the command, edt-emulation-off, at the M-x

    are bound to F7, F8, GOLD-F8, F9, GOLD-F9, F10, and GOLD-F10 in the
    default EDT mode.

15. The original EDT emulation package set up many default regular and GOLD
    bindings.  We tried to preserve most (but not all!) of these, so users of
    the original emulation package will feel more at home.

    Nevertheless, there are still many GOLD key sequences which are not bound
    to any functions.  These are prime candidates to use for your own
    customizations.

    Also, there are several commands in edt.el not bound to any key.  So, you
    will find it worthwhile to look through edt.el for functions you may wish
    to add to your personal customized bindings.

16. The VT200/VT300 series terminals steal the function keys F1 to F5 for

First, you need to have your own private lisp directory, say ~/lisp, and
you should add it to the GNU Emacs load path.

NOTE:  A few sites have different load-path requirements, so the above
       directions may need some modification if your site has such special
       needs.


Creating your own edt-user.el file:

A sample edt-user.el file is attached to the end of this user documentation.
You should use it as a guide to learn how you can customize EDT emulation
bindings to your own liking.  Names used to identify the set of LK-201
keypad and function keys are:

Keypad Keys:
                PF1 PF2 PF3 PF4
                KP7 KP8 KP9 KP-
                KP4 KP5 KP6 KP,
                KP1 KP2 KP3
                KP0     KPP KPE

Arrow Keys:
                LEFT RIGHT DOWN UP

Function Keys:
                F1 F2 F3 F4 F5  F6 F7 F8 F9 F10  F11 F12 F13 F14
                HELP DO  F17 F18 F19 F20

                FIND   INSERT   REMOVE
                SELECT PREVIOUS NEXT

Note:
                Many VT-200 terminals, and above, steal function keys F1 thru
                F5 for terminal setup control and don't send anything to the

with the top margin set to 10% of the window and the bottom margin set to 15%
of the window.  To change these settings, you can invoke the function
edt-set-scroll-margins in your .emacs file.  For example, the following line

          (edt-set-scroll-margins "20%" "25%")

sets the top margin to 20% of the window and the bottom margin to 25% of the
window.  To disable this feature, set each margin to 0%.  You can also invoke
edt-set-scroll-margins interactively while EDT Emulation is active to change
the settings for that session.

NOTE: Another way to set the scroll margins is to use the Emacs customization
feature (not available in Emacs 19) to set the following two variables
directly:

          edt-top-scroll-margin and edt-bottom-scroll-margin

Enter the Emacs `customize' command.  First select the Editing group and then
select the Emulations group.  Finally, select the Edt group and follow the
directions.

 G-F8: Paste Rect Overstrike      |   (UP)   |  (DOWN)  |  (LEFT)  | (RIGHT)  |
   F9: Cut Rect Insert            |Window Top|Window Bot|Bkwd Sent |Frwd Sent |
 G-F9: Paste Rect Insert          +----------+----------+----------+----------+
  F10: Cut Rectangle
G-F10: Paste Rectangle
  F11: ESC
  F12: Beginning of Line          +----------+----------+----------+----------+
G-F12: Delete Other Windows       |   GOLD   |   HELP   |  FNDNXT  |  DEL L   |
  F13: Delete to Begin of Word    |   (PF1)  |   (PF2)  |   (PF3)  |  (PF4)   |
 HELP: Keypad Help                |Mark Wisel|Desc Funct|   FIND   |  UND L   |
G-HELP: Emacs Help                +----------+----------+----------+----------+

  C-r: Isearch Backward           +---------------------+----------+  (ENTER) |
  C-s: Isearch Forward            |         LINE        |  SELECT  |          !
  C-t: Display the Time           |         (0)         |    (.)   |   Query  |
  C-u: Delete to Begin of Line    |      Open Line      |  RESET   |  Replace |
  C-v: Redraw Display             +---------------------+----------+----------+
  C-w: Set Screen Width 132
  C-z: Suspend Emacs                    +----------+----------+----------+
G-C-\: Split Window                     |  FNDNXT  |   Yank   |   CUT    |
                                        |  (FIND)  | (INSERT) | (REMOVE) |
  G-b: Buffer Menu                      |   FIND   |          |   COPY   |
  G-c: Compile                          +----------+----------+----------+

  G- : Undo  (GOLD Spacebar)
  G-=: Go to Line
  G-`: What line
  G-/: Query-Replace

;;; File:  edt-user.el   ---  Sample User Customizations for the Enhanced
;;;                             EDT Keypad Mode Emulation
;;;
;;;                      For GNU Emacs 19 and Above
;;;
;; Copyright (C) 1986, 1992, 1993, 2000 Free Software Foundation, Inc.

;; Author: Kevin Gallagher <[e-mail]>

  (edt-bind-function-key "KP1" 'edt-word-forward 'edt-change-case)
  (edt-bind-function-key "KP3" 'edt-word-backward 'edt-copy)
  (edt-bind-function-key "KP6" 'edt-cut-or-copy 'yank)
  (edt-bind-function-key "KP8" 'edt-scroll-window 'fill-paragraph)
  (edt-bind-function-key "KP9" 'open-line 'edt-eliminate-all-tabs)
  (edt-bind-function-key "KPP"
			 'edt-toggle-select 'edt-line-to-middle-of-window)
  (edt-bind-function-key "KPE" 'edt-change-direction 'overwrite-mode)

  ;; GOLD bindings for regular keys.
  (edt-bind-gold-key "a" 'edt-append)

                                  +----------+----------+----------+----------+
   F7: Copy Rectangle             |Prev Line |Next Line |Bkwd Char |Frwd Char |
   F8: Cut Rect Overstrike        |   (UP)   |  (DOWN)  |  (LEFT)  | (RIGHT)  |
 G-F8: Paste Rect Overstrike      |Window Top|Window Bot|Bkwd Sent |Frwd Sent |
   F9: Cut Rect Insert            +----------+----------+----------+----------+
 G-F9: Paste Rect Insert
  F10: Cut Rectangle
G-F10: Paste Rectangle
  F11: ESC                        +----------+----------+----------+----------+
  F12: Beginning of Line          |   GOLD   |Query Repl|  FNDNXT  |Del Ent L |
G-F12: Delete Other Windows       |   (PF1)  |   (PF2)  |   (PF3)  |   (PF4)  |

  C-i: Indent for Tab             +---------------------+----------+  (ENTER) |
  C-j: Duplicate Word             |         LINE        |SELECT/RES|          |
  C-k: Define Key                 |         (0)         |    (.)   |  Toggle  |
G-C-k: Restore Key                |      Open Line      |Center Lin|Insrt/Over|
  C-l: Learn                      +---------------------+----------+----------+
  C-n: Set Screen Width 80
  C-o: Open Line                       +----------+----------+----------+
  C-p: Fill Paragraph                  |  FNDNXT  |   Yank   |    CUT   |
  C-q: Quoted Insert                   |  (FIND)) | (INSERT) | (REMOVE) |
  C-r: Isearch Backward                |   FIND   |          |   COPY   |
  C-s: Isearch Forward                 +----------+----------+----------+