Mercurial > emacs
comparison man/rmail.texi @ 83241:3dcba0bc766b
Merged in changes from CVS trunk. (Long time no see!) :-)
Patches applied:
* miles@gnu.org--gnu-2004/gnus--rel--5.10--patch-83
Update from CVS
* miles@gnu.org--gnu-2004/gnus--rel--5.10--patch-84
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-1
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-2
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-3
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-4
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-5
Merge from gnus--rel--5.10
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-6
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-7
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-8
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-9
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-10
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-11
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-12
Remove "-face" suffix from lazy-highlight face name
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-13
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-14
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-15
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-16
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-17
Merge from gnus--rel--5.10
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-18
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-19
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-20
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-21
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-22
<no summary provided>
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-23
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-24
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-25
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-26
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-27
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-28
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-29
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-30
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-31
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-32
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-33
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-34
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-35
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-36
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-37
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-38
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-39
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-40
Fix regressions from latest reftex update
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-41
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-42
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-43
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-44
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-45
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-46
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-47
Merge from gnus--rel--5.10
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-48
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-49
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-50
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-51
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-52
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-53
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-54
Update from CVS: lisp/cus-start.el (all): Add `undo-outer-limit'.
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-55
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-56
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-57
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-58
Merge from gnus--rel--5.10
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-59
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-60
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-61
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-62
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-63
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-64
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-65
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-66
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-67
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-68
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-69
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-70
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-71
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-72
src/dispextern.h (xassert): Enable unconditionally.
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-73
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-74
Update from CVS
* miles@gnu.org--gnu-2005/emacs--cvs-trunk--0--patch-75
Update from CVS
* miles@gnu.org--gnu-2005/gnus--rel--5.10--base-0
tag of miles@gnu.org--gnu-2004/gnus--rel--5.10--patch-82
* miles@gnu.org--gnu-2005/gnus--rel--5.10--patch-1
Merge from emacs--cvs-trunk--0
* miles@gnu.org--gnu-2005/gnus--rel--5.10--patch-2
Merge from miles@gnu.org--gnu-2004
* miles@gnu.org--gnu-2005/gnus--rel--5.10--patch-3
Merge from emacs--cvs-trunk--0
* miles@gnu.org--gnu-2005/gnus--rel--5.10--patch-4
Merge from emacs--cvs-trunk--0
* miles@gnu.org--gnu-2005/gnus--rel--5.10--patch-5
Update from CVS: exi/gnus-faq.texi ([4.1]): Typo.
* miles@gnu.org--gnu-2005/gnus--rel--5.10--patch-6
Update from CVS
* miles@gnu.org--gnu-2005/gnus--rel--5.10--patch-7
Merge from emacs--cvs-trunk--0
* miles@gnu.org--gnu-2005/gnus--rel--5.10--patch-8
Update from CVS
* miles@gnu.org--gnu-2005/gnus--rel--5.10--patch-9
Update from CVS
* miles@gnu.org--gnu-2005/gnus--rel--5.10--patch-10
Update from CVS
* miles@gnu.org--gnu-2005/gnus--rel--5.10--patch-11
Update from CVS
git-archimport-id: lorentey@elte.hu--2004/emacs--multi-tty--0--patch-281
author | Karoly Lorentey <lorentey@elte.hu> |
---|---|
date | Thu, 03 Feb 2005 23:28:36 +0000 |
parents | cc895ba38d57 |
children | b8d2ec2a15e7 cb67264d6096 |
comparison
equal
deleted
inserted
replaced
83240:62cbc3806a41 | 83241:3dcba0bc766b |
---|---|
35 * Coding: Rmail Coding. How Rmail handles decoding character sets. | 35 * Coding: Rmail Coding. How Rmail handles decoding character sets. |
36 * Editing: Rmail Editing. Editing message text and headers in Rmail. | 36 * Editing: Rmail Editing. Editing message text and headers in Rmail. |
37 * Digest: Rmail Digest. Extracting the messages from a digest message. | 37 * Digest: Rmail Digest. Extracting the messages from a digest message. |
38 * Out of Rmail:: Converting an Rmail file to mailbox format. | 38 * Out of Rmail:: Converting an Rmail file to mailbox format. |
39 * Rot13: Rmail Rot13. Reading messages encoded in the rot13 code. | 39 * Rot13: Rmail Rot13. Reading messages encoded in the rot13 code. |
40 * Movemail: Movemail. More details of fetching new mail. | 40 * Movemail:: More details of fetching new mail. |
41 * Remote Mailboxes:: Retrieving Mail from Remote Mailboxes. | |
42 * Other Mailbox Formats:: Retrieving Mail from Local Mailboxes in | |
43 Various Formats | |
41 @end menu | 44 @end menu |
42 | 45 |
43 @node Rmail Basics | 46 @node Rmail Basics |
44 @section Basic Concepts of Rmail | 47 @section Basic Concepts of Rmail |
45 | 48 |
1150 To view a buffer using the rot13 code, use the command @kbd{M-x | 1153 To view a buffer using the rot13 code, use the command @kbd{M-x |
1151 rot13-other-window}. This displays the current buffer in another window | 1154 rot13-other-window}. This displays the current buffer in another window |
1152 which applies the code when displaying the text. | 1155 which applies the code when displaying the text. |
1153 | 1156 |
1154 @node Movemail | 1157 @node Movemail |
1155 @section @code{movemail} and POP | 1158 @section @code{movemail} program |
1156 @cindex @code{movemail} program | 1159 @cindex @code{movemail} program |
1160 | |
1161 When invoked for the first time, Rmail attempts to locate | |
1162 @code{movemail} program and determine its version. There are | |
1163 two versions of @code{movemail} program: the native one, shipped with | |
1164 GNU Emacs (we will refer to it as @samp{emacs version}) and the one | |
1165 coming from GNU mailutils (@xref{movemail,,,mailutils,GNU mailutils}, | |
1166 we will refer to it as @samp{mailutils version}). Both versions are | |
1167 compatible with each other in the sense that they support the same | |
1168 command line syntax and the same basic subset of options. However, | |
1169 the @samp{mailutils} version offers a much richer set of | |
1170 features. | |
1171 | |
1172 The @samp{Emacs version} of @code{movemail} is able to retrieve mail from usual | |
1173 UNIX mailbox formats and from remote mailboxes using the POP3 protocol. | |
1174 | |
1175 The @samp{Mailutils version} is able to handle a wide set of mailbox | |
1176 formats, such as plain UNIX mailboxes, @code{maildir} and @code{MH} | |
1177 mailboxes, etc. It is able to retrieve remote mail using POP3 or IMAP4 | |
1178 protocol. In the latter case, @code{mailutils movemail} can be | |
1179 instructed to retrieve mail using a TLS encrypted channel. | |
1180 | |
1181 The @samp{Mailutils movemail} accepts mailbox argument in the @acronym{URL} | |
1182 form. The detailed description of mailbox @acronym{URL}s can be found | |
1183 in @ref{URL,,,mailutils,Mailbox URL Formats}. In short, a | |
1184 @acronym{URL} is: | |
1185 | |
1186 @smallexample | |
1187 @var{proto}://[@var{user}[:@var{password}]@@]@var{host-or-file-name} | |
1188 @end smallexample | |
1189 | |
1190 @noindent | |
1191 where square brackets denote optional elements. | |
1192 | |
1193 @table @var | |
1194 @item proto | |
1195 Specifies the @dfn{mailbox protocol}, or @dfn{format} to | |
1196 use. The exact semantics of the rest of @acronym{URL} elements depends | |
1197 on the actual value of @var{proto}. | |
1198 | |
1199 @item user | |
1200 User name to access the remote mailbox. | |
1201 | |
1202 @item password | |
1203 User password to access the remote mailbox. | |
1204 | |
1205 @item host-or-file-name | |
1206 Hostname of the remote server for remote mailboxes or file name of a | |
1207 local mailbox. | |
1208 @end table | |
1209 | |
1210 @var{Proto} can be one of: | |
1211 | |
1212 @table @asis | |
1213 @item mbox | |
1214 Usual UNIX mailbox format. In this case, neither @var{user} nor | |
1215 @var{pass} are used, and @var{host-or-file-name} denotes the file name of | |
1216 the mailbox file, e.g., @code{mbox://var/spool/mail/smith}. | |
1217 | |
1218 @item mh | |
1219 A local mailbox in the @acronym{MH} format. @var{User} and | |
1220 @var{pass} are not used. @var{Host-or-file-name} denotes the name of | |
1221 @acronym{MH} folder, e.g., @code{mh://Mail/inbox}. | |
1222 | |
1223 @item maildir | |
1224 A local mailbox in the @acronym{maildir} format. @var{User} and | |
1225 @var{pass} are not used, and @var{host-or-file-name} denotes the name of | |
1226 @code{maildir} mailbox, e.g., @code{maildir://mail/inbox}. | |
1227 | |
1228 @item file | |
1229 Any local mailbox format. Its actual format is detected automatically | |
1230 by @code{movemail}. | |
1231 | |
1232 @item pop | |
1233 A remote mailbox to be accessed via POP3 protocol. @var{User} | |
1234 specifies the remote user name to use, @var{pass} may be used to | |
1235 specify the user password, @var{host-or-file-name} is the name or IP | |
1236 address of the remote mail server to connect to; e.g., | |
1237 @code{pop://smith:guessme@@remote.server.net}. | |
1238 | |
1239 @item imap | |
1240 A remote mailbox to be accessed via IMAP4 protocol. @var{User} | |
1241 specifies the remote user name to use, @var{pass} may be used to | |
1242 specify the user password, @var{host-or-file-name} is the name or IP | |
1243 address of the remote mail server to connect to; | |
1244 e.g., @code{imap://smith:guessme@@remote.server.net}. | |
1245 @end table | |
1246 | |
1247 Alternatively, the mailbox may be specified as a file name of the | |
1248 mailbox to use. This is equivalent to specifying the @samp{file} protocol: | |
1249 | |
1250 @smallexample | |
1251 /var/spool/mail/user @equiv{} file://var/spool/mail/user | |
1252 @end smallexample | |
1253 | |
1254 @vindex rmail-movemail-program | |
1255 @vindex rmail-movemail-search-path | |
1256 To determine which version of @code{movemail} is being used, Rmail | |
1257 examines the value of @code{rmail-movemail-program} variable. If it | |
1258 is set, its value is used as a full path to the @code{movemail} binary. | |
1259 Otherwise, Rmail searches for @code{movemail} in the list of directories | |
1260 constructed by appending the values of @code{rmail-movemail-search-path} and | |
1261 @code{exec-path} to @code{exec-directory}. | |
1262 | |
1263 @node Remote Mailboxes | |
1264 @section Retrieving Mail from Remote Mailboxes | |
1265 @pindex movemail | |
1157 | 1266 |
1158 @vindex rmail-preserve-inbox | 1267 @vindex rmail-preserve-inbox |
1159 When getting new mail, Rmail first copies the new mail from the inbox | 1268 When getting new mail, Rmail first copies the new mail from the inbox |
1160 file to the Rmail file; then it saves the Rmail file; then it truncates | 1269 file to the Rmail file; then it saves the Rmail file; then it truncates |
1161 the inbox file. This way, a system crash may cause duplication of mail | 1270 the inbox file. This way, a system crash may cause duplication of mail |
1173 that file, saves the Rmail file, and only then deletes the intermediate | 1282 that file, saves the Rmail file, and only then deletes the intermediate |
1174 file. If there is a crash at the wrong time, this file continues to | 1283 file. If there is a crash at the wrong time, this file continues to |
1175 exist, and Rmail will use it again the next time it gets new mail from | 1284 exist, and Rmail will use it again the next time it gets new mail from |
1176 that inbox. | 1285 that inbox. |
1177 | 1286 |
1178 @pindex movemail | |
1179 If Rmail is unable to convert the data in | 1287 If Rmail is unable to convert the data in |
1180 @file{~/.newmail-@var{inboxname}} into Babyl format, it renames the file | 1288 @file{~/.newmail-@var{inboxname}} into Babyl format, it renames the file |
1181 to @file{~/RMAILOSE.@var{n}} (@var{n} is an integer chosen to make the | 1289 to @file{~/RMAILOSE.@var{n}} (@var{n} is an integer chosen to make the |
1182 name unique) so that Rmail will not have trouble with the data again. | 1290 name unique) so that Rmail will not have trouble with the data again. |
1183 You should look at the file, find whatever message confuses Rmail | 1291 You should look at the file, find whatever message confuses Rmail |
1184 (probably one that includes the control-underscore character, octal code | 1292 (probably one that includes the control-underscore character, octal code |
1185 037), and delete it. Then you can use @kbd{1 g} to get new mail from | 1293 037), and delete it. Then you can use @kbd{1 g} to get new mail from |
1186 the corrected file. | 1294 the corrected file. |
1187 | 1295 |
1188 Some sites use a method called POP for accessing users' inbox data | 1296 Some sites use a method called POP for accessing users' inbox data |
1189 instead of storing the data in inbox files. @code{movemail} can work | 1297 instead of storing the data in inbox files. The @code{Emacs |
1190 with POP if you compile it with the macro @code{MAIL_USE_POP} defined. | 1298 movemail} can work with POP if you compile it with the macro |
1191 (You can achieve that by specifying @samp{--with-pop} when you run | 1299 @code{MAIL_USE_POP} defined. (You can achieve that by specifying |
1192 @code{configure} during the installation of Emacs.) | 1300 @samp{--with-pop} when you run @code{configure} during the |
1193 @code{movemail} only works with POP3, not with older | 1301 installation of Emacs.) |
1302 | |
1303 The @code{Mailutils movemail} by default supports POP, unless configured | |
1304 with @samp{--disable-pop} option. | |
1305 | |
1306 Both versions of @code{movemail} only work with POP3, not with older | |
1194 versions of POP. | 1307 versions of POP. |
1195 | 1308 |
1196 @cindex @env{MAILHOST} environment variable | 1309 @cindex @env{MAILHOST} environment variable |
1197 @cindex POP inboxes | 1310 @cindex POP mailboxes |
1198 Assuming you have compiled and installed @code{movemail} | 1311 No matter which flavor of @code{movemail} you use, you can specify |
1199 appropriately, you can specify a POP inbox by using a ``file name'' of | 1312 POP inbox by using POP @dfn{URL} (@pxref{Movemail}). A POP |
1200 the form @samp{po:@var{username}}, in the inbox list of an Rmail file. | 1313 @acronym{URL} is a ``file name'' of the form |
1201 @code{movemail} handles such a name by opening a connection to the POP | 1314 @samp{pop://@var{username}@@@var{hostname}}, where |
1202 server. The @env{MAILHOST} environment variable specifies the machine | 1315 @var{hostname} is the host name or IP address of the remote mail |
1203 to look for the server on; alternatively, you can specify the POP server | 1316 server and @var{username} is the user name on that server. |
1204 host name as part of the mailbox name using the syntax | 1317 Additionally, you may specify the password in the mailbox @acronym{URL}: |
1205 @samp{po:@var{username}:@var{hostname}}. | 1318 @samp{pop://@var{username}:@var{password}@@@var{hostname}}. In this |
1206 | 1319 case, @var{password} takes preference over the one set by |
1320 @code{rmail-remote-password}. This is especially useful if you have | |
1321 several remote mailboxes with different passwords. | |
1322 | |
1323 For backward compatibility Rmail also supports two alternative ways | |
1324 of specifying remote POP mailboxes. Specifying inbox name in the form | |
1325 @samp{po:@var{username}:@var{hostname}} is equivalent to | |
1326 @samp{pop://@var{username}@@@var{hostname}}. Alternatively, you may set | |
1327 a ``file name'' of @samp{po:@var{username}} in the inbox list of an | |
1328 Rmail file. @code{Movemail} will handle such a name by opening a | |
1329 connection to the POP server. The @env{MAILHOST} environment variable | |
1330 will in this case specify the machine to look for the server on. | |
1331 | |
1332 @cindex IMAP mailboxes | |
1333 Another method for accessing remote mailboxes is IMAP. This method is | |
1334 supported only by the @code{mailutils movemail}. To specify an IMAP | |
1335 mailbox in the inbox list, use the following mailbox @acronym{URL}: | |
1336 @samp{imap://@var{username}[:@var{password}]@@@var{hostname}}. The | |
1337 @var{password} part is optional, as descrbed above. | |
1338 | |
1339 @vindex rmail-remote-password | |
1340 @vindex rmail-remote-password-required | |
1207 @vindex rmail-pop-password | 1341 @vindex rmail-pop-password |
1208 @vindex rmail-pop-password-required | 1342 @vindex rmail-pop-password-required |
1209 Accessing mail via POP may require a password. If the variable | 1343 Accessing a remote mailbox may require a password. Rmail uses the |
1210 @code{rmail-pop-password} is non-@code{nil}, it specifies the password | 1344 following algorithm to retrieve it: |
1211 to use for POP. Alternatively, if @code{rmail-pop-password-required} is | 1345 |
1212 non-@code{nil}, then Rmail asks you for the password to use. | 1346 @enumerate |
1347 @item | |
1348 If the @var{password} is present in mailbox URL (see above), it is | |
1349 used. | |
1350 @item | |
1351 If the variable @code{rmail-remote-password} is non-@code{nil}, its | |
1352 value is used. | |
1353 @item | |
1354 Otherwise, if @code{rmail-remote-password-required} is non-@code{nil}, | |
1355 then Rmail will ask you for the password to use. | |
1356 @item | |
1357 Otherwise, Rmail assumes no password is required. | |
1358 @end enumerate | |
1359 | |
1360 For compatibility with previous versions, @code{rmail-pop-password} | |
1361 and @code{rmail-pop-password-required} may be used instead of | |
1362 @code{rmail-remote-password} and @code{rmail-remote-password-required}. | |
1213 | 1363 |
1214 @vindex rmail-movemail-flags | 1364 @vindex rmail-movemail-flags |
1215 If you need to pass additional command-line flags to @code{movemail}, | 1365 If you need to pass additional command-line flags to @code{movemail}, |
1216 set the variable @code{rmail-movemail-flags} a list of the flags you | 1366 set the variable @code{rmail-movemail-flags} a list of the flags you |
1217 wish to use. Do not use this variable to pass the @samp{-p} flag to | 1367 wish to use. Do not use this variable to pass the @samp{-p} flag to |
1229 this, and you would rather read your mail in the order in which it was | 1379 this, and you would rather read your mail in the order in which it was |
1230 received, you can tell @code{movemail} to reverse the order of | 1380 received, you can tell @code{movemail} to reverse the order of |
1231 downloaded messages by adding the @samp{-r} flag to | 1381 downloaded messages by adding the @samp{-r} flag to |
1232 @code{rmail-movemail-flags}. | 1382 @code{rmail-movemail-flags}. |
1233 | 1383 |
1384 @cindex TLS encryption (Rmail) | |
1385 @code{Mailutils movemail} supports TLS encryption. If you wish to | |
1386 use it, add the @samp{--tls} flag to @code{rmail-movemail-flags}. | |
1387 | |
1388 @node Other Mailbox Formats | |
1389 @section Retrieving Mail from Local Mailboxes in Various Formats | |
1390 | |
1391 If your incoming mail is stored on a local machine in a format other | |
1392 than UNIX mailbox, you will need the @code{mailutils movemail} to retrieve | |
1393 it. @xref{Movemail}, for the detailed description of @code{movemail} | |
1394 versions. | |
1395 | |
1396 For example, to retrieve mail from a @code{maildir} inbox located in | |
1397 @file{/var/spool/mail/in}, you would set the following in Rmail inbox list: | |
1398 | |
1399 @smallexample | |
1400 maildir://var/spool/mail/in | |
1401 @end smallexample | |
1402 | |
1234 @ignore | 1403 @ignore |
1235 arch-tag: 034965f6-38df-47a2-a9f1-b8bc8ab37e23 | 1404 arch-tag: 034965f6-38df-47a2-a9f1-b8bc8ab37e23 |
1236 @end ignore | 1405 @end ignore |