comparison nt/makefile.def @ 11937:51cb98d13316

(ARCH): New definition. (CPU,CONFIG_H,OS_TYPE): Defined. (INCLUDE,LIB): Checked if valid. (ntwin32.mak): Included. (AR,CC,LINK): New definition. (ADVAPI32,libc,BASE_LIBS): Defined. (SYS_LDFLAGS): New definition. Update comments and preprocessor conditionals. (SYS_LIB_DIR,SYS_INC_DIR): Undefined.

11936:b791b82792de

#
# BEGIN CONFIGURATION
#

#
# Set ARCH to the architecture on which you're building (i386, mips, alpha).
# Set SYS_INC_DIR and SYS_LIB_DIR to your system include and library dirs.
#

ARCH            = mips
SYS_INC_DIR     = C:\mstools\h
SYS_LIB_DIR     = C:\mstools\lib

# Set this to be the directory into which you want emacs installed
INSTALL_DIR	= C:\emacs

# May need to be cl386.exe when using the SDK on an x86.
CC              = cl.exe

# May need to be lib32.exe on NT 3.1, lib.exe on NT 3.5
AR              = lib32.exe

MAKE            = nmake.exe
LINK            = link32.exe

# If you are using VC 2.0, define COMPAT_LIB (only tested on i386)
#COMPAT_LIB	= $(SYS_LIB_DIR)\oldnames.lib

CVTRES		= cvtres.exe

#
# END CONFIGURATION
#
# You shouldn't have to change any of the below to get emacs to build and
# install on your system.  If you did have to make changes, let me know.
#

INC             = -I. -I$(SYS_INC_DIR) -I$(SYS_INC_DIR)\crt
CFLAGS          = -nologo $(INC) $(ARCH_CFLAGS) $(LOCAL_FLAGS) -DWIN32_LEAN_AND_MEAN -D$(ARCH)

OBJDIR          = obj
$(OBJDIR):;     -mkdir $(OBJDIR)
BLD             = $(OBJDIR)\$(ARCH)
$(BLD):         $(OBJDIR)
		-mkdir $(BLD)

CP		= copy
CP_DIR		= xcopy /fried

# This is completely braindamaged, but it's the only routine known to be there
DEL_TREE	= echo y | rmdir /s

!IF "$(ARCH)" == "i386"
ARCH_CFLAGS     = -nologo -D_X86_=1 -c -Zel -W2 -H63 -G3d -Zi -Od
ARCH_LDFLAGS	= -align:0x1000

!ELSE
!IF "$(ARCH)" == "mips"
CC              = mcl.exe
ARCH_CFLAGS     = -D_MIPS_=1 -c -W2 -Zi -Od -Gt0 -D__stdcall= -D__cdecl=
ARCH_LDFLAGS	= -align:0x1000

!ELSE
!IF "$(ARCH)" == "alpha"
CC              = claxp.exe
ARCH_CFLAGS     = -D_ALPHA_=1 -c -Ze -Zi -W2 -D__stdcall= -D__cdecl=
ARCH_LDFLAGS	= -align:0x2000

!ELSE
!ERROR Unknown architecture type.
!ENDIF
!ENDIF
!ENDIF

11937:51cb98d13316

#
# BEGIN CONFIGURATION
#

# Set INSTALL_DIR to be the directory into which you want emacs installed.
#
!ifndef INSTALL_DIR
INSTALL_DIR     = C:\emacs
!endif

#
# END CONFIGURATION
#

# Check that the INCLUDE and LIB environment variables are set.
#
!ifndef INCLUDE
!error The INCLUDE environment variable needs to be set.
!endif
!ifndef LIB
!error The LIB environment variable needs to be set.
!endif

# Determine the architecture we're running on.
# Define ARCH for our purposes; 
# Define CPU for use by ntwin32.mak;
# Define CONFIG_H to the appropriate config.h for the system;
#
!ifdef PROCESSOR_ARCHITECTURE
# We're on Windows NT
CPU		= $(PROCESSOR_ARCHITECTURE)
CONFIG_H	= config.nt
OS_TYPE		= winnt
! if "$(PROCESSOR_ARCHITECTURE)" == "x86"
ARCH		= i386
CPU		= i386
! else
!  if "$(PROCESSOR_ARCHITECTURE)" == "MIPS"
ARCH		= mips
!  else
!   if "$(PROCESSOR_ARCHITECTURE)" == "ALPHA"
ARCH		= alpha
!   else
!    if "$(PROCESSOR_ARCHITECTURE)" == "PPC"
ARCH		= ppc
!    else
!error Unknown architecture type "$(PROCESSOR_ARCHITECTURE)"
!    endif
!   endif
!  endif
! endif
!else
# We're on Windows 95
ARCH		= i386
CPU		= i386
CONFIG_H	= config.w95
OS_TYPE		= win95
!endif

# Include ntwin32.mak.  So far, this file seems to be supported by every
# Microsoft compiler on NT and Win95 and properly defines the executable
# names and libraries necessary to build Emacs.  I do not have access 
# to any other vendor compilers, so I do not know if they supply this 
# file, too.  For now I'll assume that they do.
#
!include <ntwin32.mak>

# Using cvtres is necessary on NT 3.10 and doesn't hurt on later platforms.
CVTRES		= cvtres.exe
AR		= $(implib)
# The assignment $(CC) = $(cc) fails even though variables are case sensitive.
LINK_TMP	= $(link)
LINK		= $(LINK_TMP)
CC_TMP		= $(cc)
CC		= $(CC_TMP)

# advapi32.lib is left off of $(baselibs) on NT 3.10
!if "$(baselibs)" == "kernel32.lib "
ADVAPI32	= advapi32.lib
!else
ADVAPI32	=
!endif

# Older ntwin32.mak files do not define libc; do it for them.
!ifndef libc
libc		= libc.lib
!endif

# The base libraries for compiling Emacs on NT.  With MSVC, this should
# include oldnames.lib.
BASE_LIBS	= $(libc) $(baselibs)

# We want any debugging info in the executable.
!if "$(LINK)" == "link32"
SYS_LDFLAGS	= 
!else
SYS_LDFLAGS	= -pdb:none -release -incremental:no
!endif

INC             = -I.
CFLAGS          = -nologo $(INC) $(ARCH_CFLAGS) $(LOCAL_FLAGS) -DWIN32_LEAN_AND_MEAN -D$(ARCH)

OBJDIR          = obj
$(OBJDIR):;	-mkdir $(OBJDIR)
BLD             = $(OBJDIR)\$(ARCH)
$(BLD):         $(OBJDIR)
		-mkdir $(BLD)

CP		= copy
CP_DIR		= xcopy /fried

# This is completely braindamaged, but it's the only routine known to be there
DEL_TREE	= echo y | rmdir /s

!if "$(ARCH)" == "i386"
ARCH_CFLAGS     = -nologo -D_X86_=1 -c -Zel -W2 -H63 -G3d -Zi -Od
ARCH_LDFLAGS	= -align:0x1000 $(SYS_LDFLAGS)

!else
!if "$(ARCH)" == "mips"
ARCH_CFLAGS     = -D_MIPS_=1 -c -W2 -Zi -Od -Gt0
ARCH_LDFLAGS	= -align:0x1000 $(SYS_LDFLAGS)

!else
!if "$(ARCH)" == "alpha"
ARCH_CFLAGS     = -D_ALPHA_=1 -c -Ze -Zi -W2 -D__stdcall= -D__cdecl=
ARCH_LDFLAGS	= -align:0x2000 $(SYS_LDFLAGS)

!else
!if "$(ARCH)" == "ppc"
# These flags are a guess...if they don't work, please send me mail.
ARCH_CFLAGS	= -D_PPC_=1 -c -Ze -Zi -W2 -Od
ARCH_LDFLAGS	= -align:0x1000 $(SYS_LDFLAGS)

!else
!ERROR Unknown architecture type "$(ARCH)".
!endif
!endif
!endif
!endif