comparison src/Makefile.in @ 108798:dedcf813aa69

Do not preprocess src/Makefile.in. * configure.in: Do not preprocess src/Makefile.in. (cpp_undefs, CPP_NEED_TRADITIONAL): Remove. (AC_EGREP_CPP): Test no longer needed. * configure: Regenerate. * config.bat: Do not preprocess src/Makefile.in. * make-dist: No more Makefile.c files. * INSTALL, src/README: Makefiles are not preprocessed. * src/Makefile.in, src/autodeps.mk, src/deps.mk, src/ns.mk: Convert comments to Makefile format. * lib-src/Makefile.in (distclean): No more Makefile.c. * src/Makefile.in (bootstrap-clean): No more Makefile.c. * admin/notes/cpp: Remove file. * admin/quick-install-emacs (AVOID): No more Makefile.c files. * etc/PROBLEMS, etc/MACHINES: Remove details of cpp problems which can no longer occur.

108797:d674108e8753

# Note that this file is edited by msdos/sed1v2.inp for MSDOS.  That
# script may need modifying in sync with changes made here.  Try to
# avoid shell-ism because the DOS build has to use the DOS shell.

# Don't try to replace the cpp processing using autoconf facilities,
# says rms.
# Replacing a particular part of the conditionals to work via autoconf
# is OK.
# Some of the conditionals might be dead now.  Finding them and
# deleting them would be fine.

SHELL = /bin/sh

# Here are the things that we expect ../configure to edit.
# We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.

version = @version@
# Substitute an assignment for the MAKE variable, because
# BSD doesn't have it as a default.
@SET_MAKE@
# Don't use LIBS.  configure puts stuff in it that either shouldn't be
# linked with Emacs or is duplicated by the cpp stuff below.
# LIBS = @LIBS@
LIBOBJS = @LIBOBJS@

lispsource = ${srcdir}/../lisp/
libsrc = ../lib-src/

## -MMD -MF ${DEPDIR}/$*.d if AUTO_DEPEND; else empty.
DEPFLAGS=@DEPFLAGS@
## test -d ${DEPDIR} || mkdir ${DEPDIR} (if AUTO_DEPEND); else ':'.
MKDEPDIR=@MKDEPDIR@

# ========================== start of cpp stuff =======================
/* From here on, comments must be done in C syntax.  */

/* DO NOT use -R.  There is a special hack described in lastfile.c
   which is used instead.  Some initialized data areas are modified
   at initial startup, then labeled as part of the text area when
   Emacs is dumped for the first time, and never changed again.  */

/* -Demacs is needed to make some files produce the correct version
   for use in Emacs.

   -DHAVE_CONFIG_H is needed for some other files to take advantage of
   the information in ``config.h''.  */

/* C_SWITCH_X_SITE must come before C_SWITCH_X_SYSTEM
   since it may have -I options that should override those.  */
/* MYCPPFLAGS only referenced in etc/DEBUG.  */
ALL_CFLAGS=-Demacs -DHAVE_CONFIG_H $(MYCPPFLAGS) -I. -I${srcdir} ${C_SWITCH_MACHINE} ${C_SWITCH_SYSTEM} ${C_SWITCH_X_SITE} ${C_SWITCH_X_SYSTEM} ${CFLAGS_SOUND} ${RSVG_CFLAGS} ${DBUS_CFLAGS} ${GCONF_CFLAGS} ${CFLAGS} ${FREETYPE_CFLAGS} ${FONTCONFIG_CFLAGS} ${LIBOTF_CFLAGS} ${M17N_FLT_CFLAGS} ${DEPFLAGS}
ALL_OBJC_CFLAGS=$(ALL_CFLAGS) $(GNU_OBJC_CFLAGS)

.SUFFIXES: .m
.c.o:
	@$(MKDEPDIR)

.m.o:
	@$(MKDEPDIR)
	$(CC) -c $(CPPFLAGS) $(ALL_OBJC_CFLAGS) $<


/* lastfile must follow all files whose initialized data areas should
   be dumped as pure by dump-emacs.  */
obj=    dispnew.o frame.o scroll.o xdisp.o menu.o $(XMENU_OBJ) window.o \
	charset.o coding.o category.o ccl.o character.o chartab.o bidi.o \
	cm.o term.o terminal.o xfaces.o $(XOBJ) $(GTK_OBJ) $(DBUS_OBJ) \
	emacs.o keyboard.o macros.o keymap.o sysdep.o \
	buffer.o filelock.o insdel.o marker.o \

	process.o callproc.o \
	region-cache.o sound.o atimer.o \
	doprnt.o strftime.o intervals.o textprop.o composite.o md5.o \
	$(MSDOS_OBJ) $(MSDOS_X_OBJ) $(NS_OBJ) $(CYGWIN_OBJ) $(FONT_OBJ)

/* Object files used on some machine or other.
   These go in the DOC file on all machines in case they are needed.  */
SOME_MACHINE_OBJECTS = dosfns.o msdos.o \
  xterm.o xfns.o xmenu.o xselect.o xrdb.o xsmfns.o fringe.o image.o \
  fontset.o dbusbind.o \
  nsterm.o nsfns.o nsmenu.o nsselect.o nsimage.o nsfont.o \
  w32.o w32console.o w32fns.o w32heap.o w32inevt.o \
  w32menu.o w32proc.o w32reg.o w32select.o w32term.o w32xfns.o $(FONT_OBJ)

/* gmalloc.o if !SYSTEM_MALLOC && !DOUG_LEA_MALLOC, else empty.  */
GMALLOC_OBJ=@GMALLOC_OBJ@

/* vm-limit.o if !SYSTEM_MALLOC, else empty.  */
VMLIMIT_OBJ=@VMLIMIT_OBJ@

/* ralloc.o if !SYSTEM_MALLOC && REL_ALLOC, else empty.  */
RALLOC_OBJ=@RALLOC_OBJ@

/* Empty on Cygwin, lastfile.o elsewhere.  */
PRE_ALLOC_OBJ=@PRE_ALLOC_OBJ@
/* lastfile.o on Cygwin, empty elsewhere.  */
POST_ALLOC_OBJ=@POST_ALLOC_OBJ@

/* List of object files that make-docfile should not be told about.  */
otherobj= $(TERMCAP_OBJ) $(PRE_ALLOC_OBJ) $(GMALLOC_OBJ) $(RALLOC_OBJ) \
  $(POST_ALLOC_OBJ) $(VMLIMIT_OBJ) $(WIDGET_OBJ) $(LIBOBJS)

/* This is the platform-specific list of Lisp files loaded into the
   dumped Emacs.  It is arranged like this because it is easier to generate
   it semi-mechanically from loadup.el this way.

   Note that this list should not include lisp files which might not
   be present, like site-load.el and site-init.el; this makefile
   expects them all to be either present or buildable.

   Files which are loaded unconditionally (i.e., on all platforms) should
   also be in shortlisp.  Files which are loaded conditionally (i.e., only
   on some platforms) should instead be in SOME_MACHINE_LISP.  */

/* Place loaddefs.el first, so it gets generated first, since it is on
   the critical path (relevant in parallel compilations).  */

lisp= \
	${lispsource}loaddefs.el \
	${lispsource}abbrev.elc \
	${lispsource}buff-menu.elc \
	${lispsource}button.elc \

	${NS_SUPPORT} \
	${lispsource}widget.elc \
	${lispsource}window.elc \
	${lispsource}version.el

/* List of relative names for those files from $lisp that are loaded
   unconditionally (i.e. on all platforms).  Files from $lisp that
   are only loaded on some platforms should instead be placed in
   SOME_MACHINE_LISP.  The only reason this variable exists is to prevent
   the make-docfile command-line getting too long for some systems.  */
shortlisp= \
	../lisp/loaddefs.el \
	../lisp/abbrev.elc \
	../lisp/buff-menu.elc \
	../lisp/button.elc \

	../lisp/epa-hook.elc \
	../lisp/widget.elc \
	../lisp/window.elc \
	../lisp/version.el

/* Like $shortlisp, but includes only those files from $lisp that are loaded
   conditionally (i.e., only on some platforms).  */
SOME_MACHINE_LISP = ../lisp/mouse.elc \
  ../lisp/select.elc ../lisp/scroll-bar.elc \
  ../lisp/ls-lisp.elc ../lisp/dos-fns.elc \
  ../lisp/w32-fns.elc ../lisp/dos-w32.elc \
  ../lisp/disp-table.elc ../lisp/dos-vars.elc \

  ../lisp/term/x-win.elc \
  ../lisp/term/pc-win.elc ../lisp/term/internal.elc \
  ../lisp/term/ns-win.elc ../lisp/term/w32-win.elc \
  ../lisp/emacs-lisp/easymenu.elc

/* Construct full set of libraries to be linked.
   Note that SunOS needs -lm to come before -lc; otherwise, you get
   duplicated symbols.  If the standard libraries were compiled
   with GCC, we might need LIB_GCC again after them.  */

LIBES = $(LOADLIBES) $(LIBS) $(LIBX_BASE) $(LIBX_OTHER) $(LIBSOUND) \
   $(RSVG_LIBS) $(DBUS_LIBS) $(LIBGPM) $(LIBRESOLV) $(LIBS_SYSTEM) \
   $(LIBS_TERMCAP) $(GETLOADAVG_LIBS) ${GCONF_LIBS} ${LIBSELINUX_LIBS} \
   $(FREETYPE_LIBS) $(FONTCONFIG_LIBS) $(LIBOTF_LIBS) $(M17N_FLT_LIBS) \
   $(LIB_GCC) $(LIB_MATH) $(LIB_STANDARD) $(LIB_GCC)

all: emacs${EXEEXT} $(OTHER_FILES)

/* Does anyone ever pay attention to the load-path-shadows output here?  */
/* The dumped Emacs is as functional and more efficient than
   bootstrap-emacs, so we replace the latter with the former.  */
emacs${EXEEXT}: temacs${EXEEXT} ${etc}DOC ${lisp}
	if test "${CANNOT_DUMP}" = "yes"; then \
	  ln -f temacs${EXEEXT} emacs${EXEEXT}; \
	  EMACSLOADPATH=${lispsource} ./emacs -q -batch \
	    -f list-load-path-shadows || true; \

	  LC_ALL=C $(RUN_TEMACS) -batch -l loadup dump || exit 1; \
	  ln -f emacs${EXEEXT} bootstrap-emacs${EXEEXT}; \
	  ./emacs -q -batch -f list-load-path-shadows || true; \
	fi

/* We run make-docfile twice because the command line may get too long
   on some systems.  */
/* ${SOME_MACHINE_OBJECTS} comes before ${obj} because some files may
   or may not be included in ${obj}, but they are always included in
   ${SOME_MACHINE_OBJECTS}.  Since a file is processed when it is mentioned
   for the first time, this prevents any variation between configurations
   in the contents of the DOC file.
   Likewise for ${SOME_MACHINE_LISP}.  */
/* Most of this Makefile refers to Lisp files via ${lispsource}, so
   we also use ${lisp} rather than ${shortlisp} for the dependency since
   the Makefile uses string equality to decide when we talk about identical
   files.  Apparently we pass ${shortlisp} rather than ${lisp} to make-docfile
   only in order to reduce the command line length.  --Stef  */
${etc}DOC: ${libsrc}make-docfile${EXEEXT} ${obj} ${lisp} ${SOME_MACHINE_LISP}
	-rm -f ${etc}DOC
	${libsrc}make-docfile -d ${srcdir} ${SOME_MACHINE_OBJECTS} ${obj} > ${etc}DOC
	${libsrc}make-docfile -a ${etc}DOC -d ${srcdir} ${SOME_MACHINE_LISP} ${shortlisp}

buildobj.h: Makefile
	echo "#define BUILDOBJ \"${obj} ${otherobj} " "\"" > buildobj.h


/* We cannot define variables for PRE_EDIT and POST_EDIT.
   If !ORDINARY_LINK && !LINKER && GCC, they add a
   \`./prefix-args -Xlinker ... \` wrapper, otherwise they are empty.
   One alternative to this approach would be to always call prefix-args, 
   and have it DTRT in all cases, by testing the above defines.  */
temacs${EXEEXT}: $(START_FILES) stamp-oldxmenu ${obj} ${otherobj} prefix-args${EXEEXT}
	$(LD) @PRE_EDIT_LDFLAGS@ ${TEMACS_LDFLAGS} @POST_EDIT_LDFLAGS@ \
	  ${TEMACS_LDFLAGS2} \
	  -o temacs ${START_FILES} ${obj} ${otherobj} ${LIBES}

prefix-args${EXEEXT}: prefix-args.o $(config_h)
	$(CC) $(LDFLAGS) prefix-args.o -o prefix-args


/* The following oldxmenu-related rules are only (possibly) used if
   HAVE_X11 && !USE_GTK, but there is no harm in always defining them
   (provided we take a little care that OLDXMENU is never empty).  */
really-lwlib:
	cd ${lwlibdir}; ${MAKE} ${MFLAGS} \
    CC='${CC}' CFLAGS='${CFLAGS}' MAKE='${MAKE}'
	@true  /* make -t should not create really-lwlib.  */
.PHONY: really-lwlib

really-oldXMenu:
	cd ${oldXMenudir}; ${MAKE} ${MFLAGS} \
    CC='${CC}' CFLAGS='${CFLAGS}' MAKE='${MAKE}'
	@true  /* make -t should not create really-oldXMenu.  */
.PHONY: really-oldXMenu

/* We don''t really need this when OLDXMENU_DEPS is empty, but as
   things stand we need something to satisfy the temacs dependency.  */
stamp-oldxmenu: ${OLDXMENU_DEPS}
	touch stamp-oldxmenu

/* Supply an ordering for parallel make.  */
../src/$(OLDXMENU): ${OLDXMENU}

$(OLDXMENU): $(OLDXMENU_TARGET)

../config.status:: epaths.in

	@$(MKDEPDIR)
	$(CC) -c $(ALL_CFLAGS) ${srcdir}/ecrt0.c
doc.o: buildobj.h


/* If HAVE_NS, some ns-specific rules (for OTHER_FILES) are inserted here.  */
@ns_frag@


mostlyclean:
	rm -f temacs${EXEEXT} prefix-args${EXEEXT} core *.core \#* *.o libXMenu11.a liblw.a

clean: mostlyclean
	rm -f emacs-*.*.*${EXEEXT} emacs${EXEEXT}
	-rm -rf ${DEPDIR}
	test "X${ns_appdir}" = "X" || rm -rf ${ns_appdir}

/* bootstrap-clean is used to clean up just before a bootstrap.
   It should remove all files generated during a compilation/bootstrap,
   but not things like config.status or TAGS.  */
bootstrap-clean: clean
	rm -f epaths.h config.h Makefile.c config.stamp stamp-oldxmenu ../etc/DOC-*
	if test -f ./.gdbinit; then \
	  mv ./.gdbinit ./.gdbinit.save; \
	  if test -f "${srcdir}/.gdbinit"; then rm -f ./.gdbinit.save; \
	  else mv ./.gdbinit.save ./.gdbinit; fi; \
	fi
/**/# This is used in making a distribution.
/**/# Do not use it on development directories!
distclean: bootstrap-clean
	rm -f Makefile
maintainer-clean: distclean
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

versionclean:
	-rm -f emacs${EXEEXT} emacs-*.*.*${EXEEXT} ../etc/DOC*
extraclean: distclean
	-rm -f *~ \#* m/?*~ s/?*~

/* Arrange to make a tags table TAGS-LISP for ../lisp,
   plus TAGS for the C files, which includes ../lisp/TAGS by reference.  */

ctagsfiles1 = [xyzXYZ]*.[hcm]
ctagsfiles2 = [a-wA-W]*.[hcm]

TAGS: $(srcdir)/$(ctagsfiles1) $(srcdir)/$(ctagsfiles2)

tags: TAGS TAGS-LISP $(lwlibdir)TAGS
.PHONY: tags


/* Bootstrapping.  */
/* Bootstrapping right is difficult because of the circular dependencies.
   Furthermore, we have to deal with the fact that many compilation targets
   such as loaddefs.el or *.elc can typically be produced by any old
   Emacs executable, so we would like to avoid rebuilding them whenever
   we build a new Emacs executable.
   To solve the circularity, we use 2 different Emacs executables,
   "emacs" is the main target and "bootstrap-emacs" is the one used
   to build the *.elc and loaddefs.el files.
   To solve the freshness issue, we used to use a third file "witness-emacs"
   which was used to witness the fact that there is a bootstrap-emacs
   executable, and then have dependencies on witness-emacs rather than
   bootstrap-emacs, but that lead to problems in parallel builds (because
   witness-emacs needed to be free from dependencies (to avoid rebuilding
   it), so it was compiled in parallel, leading typically to having 2
   processes dumping bootstrap-emacs at the same time).
   So instead, we replace the witness-emacs dependencies by conditional
   bootstrap-dependencies (via ${BOOTSTRAPEMACS}).  Of course, since we do
   not want to rely on GNU Make features, we have to rely on an external
   script to do the conditional part of the dependency
   (i.e. see the ${SUBDIR} rule ../Makefile.in).  */

.SUFFIXES: .elc .el

/* These suffix rules do not allow additional dependencies, sadly, so
   instead of adding a $(BOOTSTRAPEMACS) dependency here, we add it
   separately below.
   With GNU Make, we would just say "%.el : %.elc $(BOOTSTRAPEMACS)"  */
.el.elc:
	@cd ../lisp; $(MAKE) $(MFLAGS) compile-onefile \
	                     THEFILE=$< EMACS=${bootstrap_exe}

/* Since the .el.elc rule cannot specify an extra dependency, we do it here.  */
${lisp} ${SOME_MACHINE_LISP}: $(BOOTSTRAPEMACS)

/* VCSWITNESS points to the file that holds info about the current checkout.
   We use it as a heuristic to decide when to rebuild loaddefs.el.  */
${lispsource}loaddefs.el: $(BOOTSTRAPEMACS) $(VCSWITNESS)
	cd ../lisp; $(MAKE) $(MFLAGS) autoloads EMACS=${bootstrap_exe}

/* Dump an Emacs executable named bootstrap-emacs containing the
   files from loadup.el in source form.  */

bootstrap-emacs${EXEEXT}: temacs${EXEEXT}
	cd ../lisp; $(MAKE) $(MFLAGS) update-subdirs
	if test "${CANNOT_DUMP}" = "yes"; then \
	  ln -f temacs${EXEEXT} bootstrap-emacs${EXEEXT}; \
	else \

	  mv -f emacs${EXEEXT} bootstrap-emacs${EXEEXT}; \
	fi
	@: Compile some files earlier to speed up further compilation.
	cd ../lisp; $(MAKE) $(MFLAGS) compile-first EMACS=${bootstrap_exe}

/* Insert either autodeps.mk (if AUTO_DEPEND), else deps.mk.  */
@deps_frag@

108798:dedcf813aa69

# Note that this file is edited by msdos/sed1v2.inp for MSDOS.  That
# script may need modifying in sync with changes made here.  Try to
# avoid shell-ism because the DOS build has to use the DOS shell.

SHELL = /bin/sh

# Here are the things that we expect ../configure to edit.
# We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.

version = @version@
# Substitute an assignment for the MAKE variable, because
# BSD doesn't have it as a default.
@SET_MAKE@
# Don't use LIBS.  configure puts stuff in it that either shouldn't be
# linked with Emacs or is duplicated by the other stuff below.
# LIBS = @LIBS@
LIBOBJS = @LIBOBJS@

lispsource = ${srcdir}/../lisp/
libsrc = ../lib-src/

## -MMD -MF ${DEPDIR}/$*.d if AUTO_DEPEND; else empty.
DEPFLAGS=@DEPFLAGS@
## test -d ${DEPDIR} || mkdir ${DEPDIR} (if AUTO_DEPEND); else ':'.
MKDEPDIR=@MKDEPDIR@

## DO NOT use -R.  There is a special hack described in lastfile.c
## which is used instead.  Some initialized data areas are modified
## at initial startup, then labeled as part of the text area when
## Emacs is dumped for the first time, and never changed again.
##
## -Demacs is needed to make some files produce the correct version
## for use in Emacs.
##
## -DHAVE_CONFIG_H is needed for some other files to take advantage of
## the information in `config.h'.
##
## C_SWITCH_X_SITE must come before C_SWITCH_X_SYSTEM
## since it may have -I options that should override those.
##
## FIXME? MYCPPFLAGS only referenced in etc/DEBUG.
ALL_CFLAGS=-Demacs -DHAVE_CONFIG_H $(MYCPPFLAGS) -I. -I${srcdir} \
  ${C_SWITCH_MACHINE} ${C_SWITCH_SYSTEM} ${C_SWITCH_X_SITE} \
  ${C_SWITCH_X_SYSTEM} ${CFLAGS_SOUND} ${RSVG_CFLAGS} ${DBUS_CFLAGS} \
  ${GCONF_CFLAGS} ${CFLAGS} ${FREETYPE_CFLAGS} ${FONTCONFIG_CFLAGS} \
  ${LIBOTF_CFLAGS} ${M17N_FLT_CFLAGS} ${DEPFLAGS}
ALL_OBJC_CFLAGS=$(ALL_CFLAGS) $(GNU_OBJC_CFLAGS)

.SUFFIXES: .m
.c.o:
	@$(MKDEPDIR)

.m.o:
	@$(MKDEPDIR)
	$(CC) -c $(CPPFLAGS) $(ALL_OBJC_CFLAGS) $<


## lastfile must follow all files whose initialized data areas should
## be dumped as pure by dump-emacs.
obj=    dispnew.o frame.o scroll.o xdisp.o menu.o $(XMENU_OBJ) window.o \
	charset.o coding.o category.o ccl.o character.o chartab.o bidi.o \
	cm.o term.o terminal.o xfaces.o $(XOBJ) $(GTK_OBJ) $(DBUS_OBJ) \
	emacs.o keyboard.o macros.o keymap.o sysdep.o \
	buffer.o filelock.o insdel.o marker.o \

	process.o callproc.o \
	region-cache.o sound.o atimer.o \
	doprnt.o strftime.o intervals.o textprop.o composite.o md5.o \
	$(MSDOS_OBJ) $(MSDOS_X_OBJ) $(NS_OBJ) $(CYGWIN_OBJ) $(FONT_OBJ)

## Object files used on some machine or other.
## These go in the DOC file on all machines in case they are needed.
SOME_MACHINE_OBJECTS = dosfns.o msdos.o \
  xterm.o xfns.o xmenu.o xselect.o xrdb.o xsmfns.o fringe.o image.o \
  fontset.o dbusbind.o \
  nsterm.o nsfns.o nsmenu.o nsselect.o nsimage.o nsfont.o \
  w32.o w32console.o w32fns.o w32heap.o w32inevt.o \
  w32menu.o w32proc.o w32reg.o w32select.o w32term.o w32xfns.o $(FONT_OBJ)

## gmalloc.o if !SYSTEM_MALLOC && !DOUG_LEA_MALLOC, else empty.
GMALLOC_OBJ=@GMALLOC_OBJ@

## vm-limit.o if !SYSTEM_MALLOC, else empty.
VMLIMIT_OBJ=@VMLIMIT_OBJ@

## ralloc.o if !SYSTEM_MALLOC && REL_ALLOC, else empty.
RALLOC_OBJ=@RALLOC_OBJ@

## Empty on Cygwin, lastfile.o elsewhere.
PRE_ALLOC_OBJ=@PRE_ALLOC_OBJ@
## lastfile.o on Cygwin, empty elsewhere.
POST_ALLOC_OBJ=@POST_ALLOC_OBJ@

## List of object files that make-docfile should not be told about.
otherobj= $(TERMCAP_OBJ) $(PRE_ALLOC_OBJ) $(GMALLOC_OBJ) $(RALLOC_OBJ) \
  $(POST_ALLOC_OBJ) $(VMLIMIT_OBJ) $(WIDGET_OBJ) $(LIBOBJS)

## This is the platform-specific list of Lisp files loaded into the
## dumped Emacs.  It is arranged like this because it is easier to generate
## it semi-mechanically from loadup.el this way.
##
## Note that this list should not include lisp files which might not
## be present, like site-load.el and site-init.el; this makefile
## expects them all to be either present or buildable.
##
## Files which are loaded unconditionally (i.e., on all platforms) should
## also be in shortlisp.  Files which are loaded conditionally (i.e., only
## on some platforms) should instead be in SOME_MACHINE_LISP.
##
## Place loaddefs.el first, so it gets generated first, since it is on
## the critical path (relevant in parallel compilations).
lisp= \
	${lispsource}loaddefs.el \
	${lispsource}abbrev.elc \
	${lispsource}buff-menu.elc \
	${lispsource}button.elc \

	${NS_SUPPORT} \
	${lispsource}widget.elc \
	${lispsource}window.elc \
	${lispsource}version.el

## List of relative names for those files from $lisp that are loaded
## unconditionally (i.e. on all platforms).  Files from $lisp that
## are only loaded on some platforms should instead be placed in
## SOME_MACHINE_LISP.  The only reason this variable exists is to prevent
## the make-docfile command-line getting too long for some systems.
shortlisp= \
	../lisp/loaddefs.el \
	../lisp/abbrev.elc \
	../lisp/buff-menu.elc \
	../lisp/button.elc \

	../lisp/epa-hook.elc \
	../lisp/widget.elc \
	../lisp/window.elc \
	../lisp/version.el

## Like $shortlisp, but includes only those files from $lisp that are loaded
## conditionally (i.e., only on some platforms).
SOME_MACHINE_LISP = ../lisp/mouse.elc \
  ../lisp/select.elc ../lisp/scroll-bar.elc \
  ../lisp/ls-lisp.elc ../lisp/dos-fns.elc \
  ../lisp/w32-fns.elc ../lisp/dos-w32.elc \
  ../lisp/disp-table.elc ../lisp/dos-vars.elc \

  ../lisp/term/x-win.elc \
  ../lisp/term/pc-win.elc ../lisp/term/internal.elc \
  ../lisp/term/ns-win.elc ../lisp/term/w32-win.elc \
  ../lisp/emacs-lisp/easymenu.elc

## Construct full set of libraries to be linked.
## Note that SunOS needs -lm to come before -lc; otherwise, you get
## duplicated symbols.  If the standard libraries were compiled
## with GCC, we might need LIB_GCC again after them.
LIBES = $(LOADLIBES) $(LIBS) $(LIBX_BASE) $(LIBX_OTHER) $(LIBSOUND) \
   $(RSVG_LIBS) $(DBUS_LIBS) $(LIBGPM) $(LIBRESOLV) $(LIBS_SYSTEM) \
   $(LIBS_TERMCAP) $(GETLOADAVG_LIBS) ${GCONF_LIBS} ${LIBSELINUX_LIBS} \
   $(FREETYPE_LIBS) $(FONTCONFIG_LIBS) $(LIBOTF_LIBS) $(M17N_FLT_LIBS) \
   $(LIB_GCC) $(LIB_MATH) $(LIB_STANDARD) $(LIB_GCC)

all: emacs${EXEEXT} $(OTHER_FILES)

## Does anyone ever pay attention to the load-path-shadows output here?
## The dumped Emacs is as functional and more efficient than
## bootstrap-emacs, so we replace the latter with the former.
emacs${EXEEXT}: temacs${EXEEXT} ${etc}DOC ${lisp}
	if test "${CANNOT_DUMP}" = "yes"; then \
	  ln -f temacs${EXEEXT} emacs${EXEEXT}; \
	  EMACSLOADPATH=${lispsource} ./emacs -q -batch \
	    -f list-load-path-shadows || true; \

	  LC_ALL=C $(RUN_TEMACS) -batch -l loadup dump || exit 1; \
	  ln -f emacs${EXEEXT} bootstrap-emacs${EXEEXT}; \
	  ./emacs -q -batch -f list-load-path-shadows || true; \
	fi

## We run make-docfile twice because the command line may get too long
## on some systems.
## ${SOME_MACHINE_OBJECTS} comes before ${obj} because some files may
## or may not be included in ${obj}, but they are always included in
## ${SOME_MACHINE_OBJECTS}.  Since a file is processed when it is mentioned
## for the first time, this prevents any variation between configurations
## in the contents of the DOC file.
## Likewise for ${SOME_MACHINE_LISP}.
## Most of this Makefile refers to Lisp files via ${lispsource}, so
## we also use ${lisp} rather than ${shortlisp} for the dependency since
## the Makefile uses string equality to decide when we talk about identical
## files.  Apparently we pass ${shortlisp} rather than ${lisp} to make-docfile
## only in order to reduce the command line length.  --Stef
${etc}DOC: ${libsrc}make-docfile${EXEEXT} ${obj} ${lisp} ${SOME_MACHINE_LISP}
	-rm -f ${etc}DOC
	${libsrc}make-docfile -d ${srcdir} ${SOME_MACHINE_OBJECTS} ${obj} > ${etc}DOC
	${libsrc}make-docfile -a ${etc}DOC -d ${srcdir} ${SOME_MACHINE_LISP} ${shortlisp}

buildobj.h: Makefile
	echo "#define BUILDOBJ \"${obj} ${otherobj} " "\"" > buildobj.h


## We cannot define variables for PRE_EDIT and POST_EDIT.
## If !ORDINARY_LINK && !LINKER && GCC, they add a
## `./prefix-args -Xlinker ... ` wrapper, otherwise they are empty.
## One alternative to this approach would be to always call prefix-args, 
## and have it DTRT in all cases, by testing the above defines.
temacs${EXEEXT}: $(START_FILES) stamp-oldxmenu ${obj} ${otherobj} prefix-args${EXEEXT}
	$(LD) @PRE_EDIT_LDFLAGS@ ${TEMACS_LDFLAGS} @POST_EDIT_LDFLAGS@ \
	  ${TEMACS_LDFLAGS2} \
	  -o temacs ${START_FILES} ${obj} ${otherobj} ${LIBES}

prefix-args${EXEEXT}: prefix-args.o $(config_h)
	$(CC) $(LDFLAGS) prefix-args.o -o prefix-args


## The following oldxmenu-related rules are only (possibly) used if
## HAVE_X11 && !USE_GTK, but there is no harm in always defining them
## (provided we take a little care that OLDXMENU is never empty).
really-lwlib:
	cd ${lwlibdir}; ${MAKE} ${MFLAGS} \
    CC='${CC}' CFLAGS='${CFLAGS}' MAKE='${MAKE}'
	@true  # make -t should not create really-lwlib.
.PHONY: really-lwlib

really-oldXMenu:
	cd ${oldXMenudir}; ${MAKE} ${MFLAGS} \
    CC='${CC}' CFLAGS='${CFLAGS}' MAKE='${MAKE}'
	@true  # make -t should not create really-oldXMenu.
.PHONY: really-oldXMenu

## We do not really need this when OLDXMENU_DEPS is empty, but as
## things stand we need something to satisfy the temacs dependency.
stamp-oldxmenu: ${OLDXMENU_DEPS}
	touch stamp-oldxmenu

## Supply an ordering for parallel make.
../src/$(OLDXMENU): ${OLDXMENU}

$(OLDXMENU): $(OLDXMENU_TARGET)

../config.status:: epaths.in

	@$(MKDEPDIR)
	$(CC) -c $(ALL_CFLAGS) ${srcdir}/ecrt0.c
doc.o: buildobj.h


## If HAVE_NS, some ns-specific rules (for OTHER_FILES) are inserted here.
@ns_frag@


mostlyclean:
	rm -f temacs${EXEEXT} prefix-args${EXEEXT} core *.core \#* *.o libXMenu11.a liblw.a

clean: mostlyclean
	rm -f emacs-*.*.*${EXEEXT} emacs${EXEEXT}
	-rm -rf ${DEPDIR}
	test "X${ns_appdir}" = "X" || rm -rf ${ns_appdir}

## bootstrap-clean is used to clean up just before a bootstrap.
## It should remove all files generated during a compilation/bootstrap,
## but not things like config.status or TAGS.
bootstrap-clean: clean
	rm -f epaths.h config.h config.stamp stamp-oldxmenu ../etc/DOC-*
	if test -f ./.gdbinit; then \
	  mv ./.gdbinit ./.gdbinit.save; \
	  if test -f "${srcdir}/.gdbinit"; then rm -f ./.gdbinit.save; \
	  else mv ./.gdbinit.save ./.gdbinit; fi; \
	fi
## This is used in making a distribution.
## Do not use it on development directories!
distclean: bootstrap-clean
	rm -f Makefile
maintainer-clean: distclean
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

versionclean:
	-rm -f emacs${EXEEXT} emacs-*.*.*${EXEEXT} ../etc/DOC*
extraclean: distclean
	-rm -f *~ \#* m/?*~ s/?*~

## Arrange to make a tags table TAGS-LISP for ../lisp,
## plus TAGS for the C files, which includes ../lisp/TAGS by reference.

ctagsfiles1 = [xyzXYZ]*.[hcm]
ctagsfiles2 = [a-wA-W]*.[hcm]

TAGS: $(srcdir)/$(ctagsfiles1) $(srcdir)/$(ctagsfiles2)

tags: TAGS TAGS-LISP $(lwlibdir)TAGS
.PHONY: tags


### Bootstrapping.

## Bootstrapping right is difficult because of the circular dependencies.
## Furthermore, we have to deal with the fact that many compilation targets
## such as loaddefs.el or *.elc can typically be produced by any old
## Emacs executable, so we would like to avoid rebuilding them whenever
## we build a new Emacs executable.
## To solve the circularity, we use 2 different Emacs executables,
## "emacs" is the main target and "bootstrap-emacs" is the one used
## to build the *.elc and loaddefs.el files.
## To solve the freshness issue, we used to use a third file "witness-emacs"
## which was used to witness the fact that there is a bootstrap-emacs
## executable, and then have dependencies on witness-emacs rather than
## bootstrap-emacs, but that lead to problems in parallel builds (because
## witness-emacs needed to be free from dependencies (to avoid rebuilding
## it), so it was compiled in parallel, leading typically to having 2
## processes dumping bootstrap-emacs at the same time).
## So instead, we replace the witness-emacs dependencies by conditional
## bootstrap-dependencies (via ${BOOTSTRAPEMACS}).  Of course, since we do
## not want to rely on GNU Make features, we have to rely on an external
## script to do the conditional part of the dependency
## (i.e. see the ${SUBDIR} rule ../Makefile.in).

.SUFFIXES: .elc .el

## These suffix rules do not allow additional dependencies, sadly, so
## instead of adding a $(BOOTSTRAPEMACS) dependency here, we add it
## separately below.
## With GNU Make, we would just say "%.el : %.elc $(BOOTSTRAPEMACS)"
.el.elc:
	@cd ../lisp; $(MAKE) $(MFLAGS) compile-onefile \
	                     THEFILE=$< EMACS=${bootstrap_exe}

## Since the .el.elc rule cannot specify an extra dependency, we do it here.
${lisp} ${SOME_MACHINE_LISP}: $(BOOTSTRAPEMACS)

## VCSWITNESS points to the file that holds info about the current checkout.
## We use it as a heuristic to decide when to rebuild loaddefs.el.
${lispsource}loaddefs.el: $(BOOTSTRAPEMACS) $(VCSWITNESS)
	cd ../lisp; $(MAKE) $(MFLAGS) autoloads EMACS=${bootstrap_exe}

## Dump an Emacs executable named bootstrap-emacs containing the
## files from loadup.el in source form.
bootstrap-emacs${EXEEXT}: temacs${EXEEXT}
	cd ../lisp; $(MAKE) $(MFLAGS) update-subdirs
	if test "${CANNOT_DUMP}" = "yes"; then \
	  ln -f temacs${EXEEXT} bootstrap-emacs${EXEEXT}; \
	else \

	  mv -f emacs${EXEEXT} bootstrap-emacs${EXEEXT}; \
	fi
	@: Compile some files earlier to speed up further compilation.
	cd ../lisp; $(MAKE) $(MFLAGS) compile-first EMACS=${bootstrap_exe}

## Insert either autodeps.mk (if AUTO_DEPEND), else deps.mk.
@deps_frag@


### Makefile.in ends here