Mercurial > emacs

diff lisp/makefile.w32-in @ 31631:011566e20a32

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Revert to Unix line endings.
author Andrew Innes <andrewi@gnu.org>
date Thu, 14 Sep 2000 21:59:59 +0000
parents cea09a4aaa04
children 70dd1b38f43e
line wrap: on
line diff
--- a/lisp/makefile.w32-in	Thu Sep 14 21:51:49 2000 +0000
+++ b/lisp/makefile.w32-in	Thu Sep 14 21:59:59 2000 +0000
@@ -1,285 +1,285 @@
-#  Hacked up Nmake makefile for GNU Emacs
-#   Geoff Voelker (voelker@cs.washington.edu)
-#  Copyright (c) 1994 Free Software Foundation, Inc.
-#
-#  This file is part of GNU Emacs.
-#  
-#  GNU Emacs is free software; you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation; either version 2, or (at your option)
-#  any later version.
-#  
-#  GNU Emacs is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#  
-#  You should have received a copy of the GNU General Public License
-#  along with GNU Emacs; see the file COPYING.  If not, write to the
-#  Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-#  Boston, MA 02111-1307, USA.
-#
-
-ALL =
-
-all: $(ALL)
-
-SQUOTE='
-# '
-
-#lisp=$(MAKEDIR:\=/)
-lisp=.
-
-# You can specify a different executable on the make command line,
-# e.g. "make EMACS=../src/emacs ...".
-
-EMACS = "../bin/emacs.exe"
-
-# Command line flags for Emacs.  This must include --multibyte,
-# otherwise some files will not compile.
-
-EMACSOPT = -batch --no-init-file --no-site-file --multibyte
-
-lisptagsfiles1 = $(lisp)/*.el
-lisptagsfiles2 = $(lisp)/*/*.el
-ETAGS = "../lib-src/$(BLD)/etags"
-
-# Files which should not be compiled.
-# - emacs-lisp/cl-specs.el:  only contains `def-edebug-spec's so there's
-#   no point compiling it, although it doesn't hurt.
-
-DONTCOMPILE = \
-	$(lisp)/bindings.el \
-	$(lisp)/cus-load.el \
-	$(lisp)/cus-start.el \
-	$(lisp)/emacs-lisp/cl-specs.el \
-	$(lisp)/eshell/esh-maint.el \
-	$(lisp)/eshell/esh-groups.el \
-	$(lisp)/finder-inf.el \
-	$(lisp)/forms-d2.el \
-	$(lisp)/forms-pass.el \
-	$(lisp)/generic-x.el \
-	$(lisp)/international/latin-1.el \
-	$(lisp)/international/latin-2.el \
-	$(lisp)/international/latin-3.el \
-	$(lisp)/international/latin-4.el \
-	$(lisp)/international/latin-5.el \
-	$(lisp)/international/latin-8.el \
-	$(lisp)/international/latin-9.el \
-	$(lisp)/international/mule-conf.el \
-	$(lisp)/loaddefs.el \
-	$(lisp)/loadup.el \
-	$(lisp)/mail/blessmail.el \
-	$(lisp)/mail/sc.el \
-	$(lisp)/patcomp.el \
-	$(lisp)/paths.el \
-	$(lisp)/play/bruce.el \
-	$(lisp)/subdirs.el \
-	$(lisp)/term/internal.el \
-	$(lisp)/version.el
-
-# Files to compile before others during a bootstrap.  This is done
-# to speed up the bootstrap process.
-
-COMPILE_FIRST = \
-	$(lisp)/emacs-lisp/byte-opt.el \
-	$(lisp)/emacs-lisp/bytecomp.el \
-	$(lisp)/subr.el
-
-# The actual Emacs command run in the targets below.
-
-emacs = $(EMACS) $(EMACSOPT)
-
-# Common command to find subdirectories
-
-setwins=subdirs=`find $$wd -type d -print`; \
-	for file in $$subdirs; do \
-	   case $$file in */Old | */RCS | */CVS | */CVS/* | */=* ) ;; \
-		*) wins="$$wins $$file" ;; \
-	   esac; \
-        done
-
-# Have to define the list of subdirs manually when not using sh.
-WINS=\
-	calendar \
-	emacs-lisp \
-	emulation \
-	eshell \
-	gnus \
-	international \
-	language \
-	mail \
-	net \
-	play \
-	progmodes \
-	term \
-	textmodes
-
-doit:
-
-cus-load.el:
-	touch $@
-custom-deps: cus-load.el doit
-	@echo Directories: $(WINS)
-	$(emacs) -l cus-dep --eval $(ARGQUOTE)(setq find-file-hooks nil)$(ARGQUOTE) -f custom-make-dependencies $(lisp) $(WINS)
-
-finder-inf.el:
-	echo (provide $(SQUOTE)finder-inf)>> $@
-
-finder-data: finder-inf.el doit
-	@echo Directories: $(WINS)
-	$(emacs) -l finder -f finder-compile-keywords-make-dist $(lisp) $(WINS)
-
-loaddefs.el:
-	echo ;;; loaddefs.el --- automatically extracted autoloads> $@
-	echo ;;; Code:>> $@
-	echo >> $@
-	echo ;;; Local Variables:>> $@
-	echo ;;; version-control: never>> $@
-	echo ;;; no-byte-compile: t>> $@
-	echo ;;; no-update-autoloads: t>> $@
-	echo ;;; End:>> $@
-	echo ;;; loaddefs.el ends here>> $@
-
-autoloads: loaddefs.el doit
-	@echo Directories: $(WINS)
-	set EMACSLOADPATH=$(lisp)
-	$(SETLOADPATH) $(emacs) -l autoload --eval $(ARGQUOTE)(setq find-file-hooks nil generated-autoload-file $(DQUOTE)$(lisp)/loaddefs.el$(DQUOTE))$(ARGQUOTE) -f batch-update-autoloads $(lisp) $(WINS)
-
-subdirs.el:
-	$(MAKE) $(MFLAGS) update-subdirs
-
-# Need separate version for sh and native cmd.exe
-update-subdirs: update-subdirs-$(SHELLTYPE)
-
-update-subdirs-CMD: doit
-	@set QWINS=
-	@for %d in ($(WINS)) do if not (%d)==(term) set QWINS=%QWINS% "%d"
-	echo ;; In load-path, after this directory should come> subdirs.el
-	echo ;; certain of its subdirectories.  Here we specify them.>> subdirs.el
-	echo (normal-top-level-add-to-load-path $(SQUOTE)(%QWINS%))>> subdirs.el
-
-update-subdirs-SH: doit
-	wd=$(lisp); $(setwins); \
-	for file in $$wins; do \
-	   $(srcdir)/update-subdirs $$file; \
-	done;
-
-updates: update-subdirs autoloads finder-data custom-deps
-
-TAGS: $(lisptagsfiles1) $(lisptagsfiles2)
-	$(ETAGS) $(lisptagsfiles1) $(lisptagsfiles2)
-
-TAGS-LISP: $(lispsource)$(lisptagsfiles1) $(lispsource)$(lisptagsfiles2)
-	$(ETAGS) -o TAGS-LISP $(lispsource)$(lisptagsfiles1) $(lispsource)$(lisptagsfiles2)
-
-.el.elc:
-	set EMACSLOADPATH=$(lisp)
-	-$(SETLOADPATH) $(emacs) -f batch-byte-compile $<
-
-$(DONTCOMPILE:.el=.elc):
-	-$(DEL) $@
-
-# Compile all Lisp files, except those from DONTCOMPILE.  This
-# compiles files unconditionally.  All .elc files are made writable
-# before compilation in case we checked out read-only (CVS option -r).
-# Files MUST be compiled one by one.  If we compile several files in a
-# row we can't make sure that the compilation environment is clean.
-# We also set the load-path of the Emacs used for compilation to the
-# current directory and its subdirectories, to make sure require's and
-# load's in the files being compiled find the right files.
-
-# Need separate version for sh and native cmd.exe
-compile-files: subdirs.el compile-files-$(SHELLTYPE) doit
-
-compile-files-CMD:
-	set EMACSLOADPATH=$(lisp)
-	-for %f in ($(lisp) $(WINS)) do for %g in (%f\*.elc) do @attrib -r %g
-	for %f in ($(COMPILE_FIRST)) do $(emacs) -f batch-byte-compile %f
-	for %f in ($(lisp) $(WINS)) do for %g in (%f/*.el) do $(emacs) -f batch-byte-compile %f/%g
-
-compile-files-SH:
-#	for elc in $(lisp)/*.elc $(lisp)/*/*.elc; do attrib -r $$elc; done
-	for el in $(COMPILE_FIRST); do \
-	  echo Compiling $$el; \
-	  EMACSLOADPATH=$(lisp) $(emacs) -f batch-byte-compile $$el; \
-	done
-	for dir in $(lisp) $(WINS); do \
-	  for el in $$dir/*.el; do \
-	    echo Compiling $$el; \
-	    EMACSLOADPATH=$(lisp) $(emacs) -f batch-byte-compile $$el; \
-	  done; \
-	done
-
-# Backup compiled Lisp files in elc.tar.gz.  If that file already
-# exists, make a backup of it.
-
-backup-compiled-files:
-	-mv $(lisp)/elc.tar.gz $(lisp)/elc.tar.gz~
-	-tar czf $(lisp)/elc.tar.gz $(lisp)/*.elc $(lisp)/*/*.elc
-
-# Compile Lisp files, but save old compiled files first.
-
-compile: backup-compiled-files compile-files
-
-# Recompile all Lisp files which are newer than their .elc files.
-# Note that this doesn't create .elc files.  It only recompiles if an
-# .elc is present.
-
-recompile: doit
-	set EMACSLOADPATH=$(lisp)
-	$(SETLOADPATH) $(emacs) -f batch-byte-recompile-directory .
-
-# Prepare a bootstrap in the lisp subdirectory.  Build loaddefs.el,
-# because it's not sure it's up-to-date, and if it's not, that might
-# lead to errors during the bootstrap because something fails to
-# autoload as expected.  Remove compiled Lisp files so that
-# bootstrap-emacs will be built from sources only.
-
-# Need separate version for sh and native cmd.exe
-bootstrap-clean: bootstrap-clean-$(SHELLTYPE)
-
-bootstrap-clean-CMD:
-	if exist $(EMACS) $(MAKE) $(MFLAGS) autoloads
-	-for %f in ($(lisp) $(WINS)) do for %g in (%f\*.elc) do @$(DEL) %g
-
-bootstrap-clean-SH:
-	if test -f $(EMACS); then $(MAKE) $(MFLAGS) autoloads; fi
-	-rm -f $(lisp)/*.elc $(lisp)/*/*.elc
-
-# Generate/update files for the bootstrap process.
-
-bootstrap: autoloads compile-files custom-deps
-
-#
-# Assuming INSTALL_DIR is defined, copy the elisp files to it
-# Windows 95 makes this harder than it should be.
-#
-install:
-		- mkdir "$(INSTALL_DIR)/lisp"
-		- $(DEL) ../same-dir.tst
-		- $(DEL) "$(INSTALL_DIR)/same-dir.tst"
-		echo SameDirTest > "$(INSTALL_DIR)/same-dir.tst"
-#ifdef COPY_LISP_SOURCE
-		$(IFNOTSAMEDIR) $(CP_DIR) . "$(INSTALL_DIR)/lisp" $(ENDIF)
-#else
-#		$(IFNOTSAMEDIR) $(CP_DIR) *.elc "$(INSTALL_DIR)/lisp" $(ENDIF)
-#		$(IFNOTSAMEDIR) $(CP) cus-load.el "$(INSTALL_DIR)/lisp" $(ENDIF)
-#		$(IFNOTSAMEDIR) $(CP) forms*.el "$(INSTALL_DIR)/lisp" $(ENDIF)
-#		$(IFNOTSAMEDIR) $(CP) patcomp.el "$(INSTALL_DIR)/lisp" $(ENDIF)
-#		$(IFNOTSAMEDIR) $(CP) subdirs.el "$(INSTALL_DIR)/lisp" $(ENDIF)
-#		$(IFNOTSAMEDIR) $(CP) version.el "$(INSTALL_DIR)/lisp" $(ENDIF)
-#		$(IFNOTSAMEDIR) $(CP) mail/blessmail.el "$(INSTALL_DIR)/lisp/mail" $(ENDIF)
-#		$(IFNOTSAMEDIR) $(CP) mail/sc.el "$(INSTALL_DIR)/lisp/mail" $(ENDIF)
-#		$(IFNOTSAMEDIR) $(CP) play/bruce.el "$(INSTALL_DIR)/lisp/play" $(ENDIF)
-#		$(IFNOTSAMEDIR) $(CP) international/latin-*.el "$(INSTALL_DIR)/lisp/international" $(ENDIF)
-#		$(IFNOTSAMEDIR) $(CP) international/mule-conf.el "$(INSTALL_DIR)/lisp/international" $(ENDIF)
-#endif
-		- $(DEL) ../same-dir.tst
-		- $(DEL) "$(INSTALL_DIR)/same-dir.tst"
-
-#
-# Maintenance
-# 
-clean:
-		- $(DEL) *~
+#  Hacked up Nmake makefile for GNU Emacs
+#   Geoff Voelker (voelker@cs.washington.edu)
+#  Copyright (c) 1994 Free Software Foundation, Inc.
+#
+#  This file is part of GNU Emacs.
+#  
+#  GNU Emacs is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2, or (at your option)
+#  any later version.
+#  
+#  GNU Emacs is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#  
+#  You should have received a copy of the GNU General Public License
+#  along with GNU Emacs; see the file COPYING.  If not, write to the
+#  Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+#  Boston, MA 02111-1307, USA.
+#
+
+ALL =
+
+all: $(ALL)
+
+SQUOTE='
+# '
+
+#lisp=$(MAKEDIR:\=/)
+lisp=.
+
+# You can specify a different executable on the make command line,
+# e.g. "make EMACS=../src/emacs ...".
+
+EMACS = "../bin/emacs.exe"
+
+# Command line flags for Emacs.  This must include --multibyte,
+# otherwise some files will not compile.
+
+EMACSOPT = -batch --no-init-file --no-site-file --multibyte
+
+lisptagsfiles1 = $(lisp)/*.el
+lisptagsfiles2 = $(lisp)/*/*.el
+ETAGS = "../lib-src/$(BLD)/etags"
+
+# Files which should not be compiled.
+# - emacs-lisp/cl-specs.el:  only contains `def-edebug-spec's so there's
+#   no point compiling it, although it doesn't hurt.
+
+DONTCOMPILE = \
+	$(lisp)/bindings.el \
+	$(lisp)/cus-load.el \
+	$(lisp)/cus-start.el \
+	$(lisp)/emacs-lisp/cl-specs.el \
+	$(lisp)/eshell/esh-maint.el \
+	$(lisp)/eshell/esh-groups.el \
+	$(lisp)/finder-inf.el \
+	$(lisp)/forms-d2.el \
+	$(lisp)/forms-pass.el \
+	$(lisp)/generic-x.el \
+	$(lisp)/international/latin-1.el \
+	$(lisp)/international/latin-2.el \
+	$(lisp)/international/latin-3.el \
+	$(lisp)/international/latin-4.el \
+	$(lisp)/international/latin-5.el \
+	$(lisp)/international/latin-8.el \
+	$(lisp)/international/latin-9.el \
+	$(lisp)/international/mule-conf.el \
+	$(lisp)/loaddefs.el \
+	$(lisp)/loadup.el \
+	$(lisp)/mail/blessmail.el \
+	$(lisp)/mail/sc.el \
+	$(lisp)/patcomp.el \
+	$(lisp)/paths.el \
+	$(lisp)/play/bruce.el \
+	$(lisp)/subdirs.el \
+	$(lisp)/term/internal.el \
+	$(lisp)/version.el
+
+# Files to compile before others during a bootstrap.  This is done
+# to speed up the bootstrap process.
+
+COMPILE_FIRST = \
+	$(lisp)/emacs-lisp/byte-opt.el \
+	$(lisp)/emacs-lisp/bytecomp.el \
+	$(lisp)/subr.el
+
+# The actual Emacs command run in the targets below.
+
+emacs = $(EMACS) $(EMACSOPT)
+
+# Common command to find subdirectories
+
+setwins=subdirs=`find $$wd -type d -print`; \
+	for file in $$subdirs; do \
+	   case $$file in */Old | */RCS | */CVS | */CVS/* | */=* ) ;; \
+		*) wins="$$wins $$file" ;; \
+	   esac; \
+        done
+
+# Have to define the list of subdirs manually when not using sh.
+WINS=\
+	calendar \
+	emacs-lisp \
+	emulation \
+	eshell \
+	gnus \
+	international \
+	language \
+	mail \
+	net \
+	play \
+	progmodes \
+	term \
+	textmodes
+
+doit:
+
+cus-load.el:
+	touch $@
+custom-deps: cus-load.el doit
+	@echo Directories: $(WINS)
+	$(emacs) -l cus-dep --eval $(ARGQUOTE)(setq find-file-hooks nil)$(ARGQUOTE) -f custom-make-dependencies $(lisp) $(WINS)
+
+finder-inf.el:
+	echo (provide $(SQUOTE)finder-inf)>> $@
+
+finder-data: finder-inf.el doit
+	@echo Directories: $(WINS)
+	$(emacs) -l finder -f finder-compile-keywords-make-dist $(lisp) $(WINS)
+
+loaddefs.el:
+	echo ;;; loaddefs.el --- automatically extracted autoloads> $@
+	echo ;;; Code:>> $@
+	echo >> $@
+	echo ;;; Local Variables:>> $@
+	echo ;;; version-control: never>> $@
+	echo ;;; no-byte-compile: t>> $@
+	echo ;;; no-update-autoloads: t>> $@
+	echo ;;; End:>> $@
+	echo ;;; loaddefs.el ends here>> $@
+
+autoloads: loaddefs.el doit
+	@echo Directories: $(WINS)
+	set EMACSLOADPATH=$(lisp)
+	$(SETLOADPATH) $(emacs) -l autoload --eval $(ARGQUOTE)(setq find-file-hooks nil generated-autoload-file $(DQUOTE)$(lisp)/loaddefs.el$(DQUOTE))$(ARGQUOTE) -f batch-update-autoloads $(lisp) $(WINS)
+
+subdirs.el:
+	$(MAKE) $(MFLAGS) update-subdirs
+
+# Need separate version for sh and native cmd.exe
+update-subdirs: update-subdirs-$(SHELLTYPE)
+
+update-subdirs-CMD: doit
+	@set QWINS=
+	@for %d in ($(WINS)) do if not (%d)==(term) set QWINS=%QWINS% "%d"
+	echo ;; In load-path, after this directory should come> subdirs.el
+	echo ;; certain of its subdirectories.  Here we specify them.>> subdirs.el
+	echo (normal-top-level-add-to-load-path $(SQUOTE)(%QWINS%))>> subdirs.el
+
+update-subdirs-SH: doit
+	wd=$(lisp); $(setwins); \
+	for file in $$wins; do \
+	   $(srcdir)/update-subdirs $$file; \
+	done;
+
+updates: update-subdirs autoloads finder-data custom-deps
+
+TAGS: $(lisptagsfiles1) $(lisptagsfiles2)
+	$(ETAGS) $(lisptagsfiles1) $(lisptagsfiles2)
+
+TAGS-LISP: $(lispsource)$(lisptagsfiles1) $(lispsource)$(lisptagsfiles2)
+	$(ETAGS) -o TAGS-LISP $(lispsource)$(lisptagsfiles1) $(lispsource)$(lisptagsfiles2)
+
+.el.elc:
+	set EMACSLOADPATH=$(lisp)
+	-$(SETLOADPATH) $(emacs) -f batch-byte-compile $<
+
+$(DONTCOMPILE:.el=.elc):
+	-$(DEL) $@
+
+# Compile all Lisp files, except those from DONTCOMPILE.  This
+# compiles files unconditionally.  All .elc files are made writable
+# before compilation in case we checked out read-only (CVS option -r).
+# Files MUST be compiled one by one.  If we compile several files in a
+# row we can't make sure that the compilation environment is clean.
+# We also set the load-path of the Emacs used for compilation to the
+# current directory and its subdirectories, to make sure require's and
+# load's in the files being compiled find the right files.
+
+# Need separate version for sh and native cmd.exe
+compile-files: subdirs.el compile-files-$(SHELLTYPE) doit
+
+compile-files-CMD:
+	set EMACSLOADPATH=$(lisp)
+	-for %f in ($(lisp) $(WINS)) do for %g in (%f\*.elc) do @attrib -r %g
+	for %f in ($(COMPILE_FIRST)) do $(emacs) -f batch-byte-compile %f
+	for %f in ($(lisp) $(WINS)) do for %g in (%f/*.el) do $(emacs) -f batch-byte-compile %f/%g
+
+compile-files-SH:
+#	for elc in $(lisp)/*.elc $(lisp)/*/*.elc; do attrib -r $$elc; done
+	for el in $(COMPILE_FIRST); do \
+	  echo Compiling $$el; \
+	  EMACSLOADPATH=$(lisp) $(emacs) -f batch-byte-compile $$el; \
+	done
+	for dir in $(lisp) $(WINS); do \
+	  for el in $$dir/*.el; do \
+	    echo Compiling $$el; \
+	    EMACSLOADPATH=$(lisp) $(emacs) -f batch-byte-compile $$el; \
+	  done; \
+	done
+
+# Backup compiled Lisp files in elc.tar.gz.  If that file already
+# exists, make a backup of it.
+
+backup-compiled-files:
+	-mv $(lisp)/elc.tar.gz $(lisp)/elc.tar.gz~
+	-tar czf $(lisp)/elc.tar.gz $(lisp)/*.elc $(lisp)/*/*.elc
+
+# Compile Lisp files, but save old compiled files first.
+
+compile: backup-compiled-files compile-files
+
+# Recompile all Lisp files which are newer than their .elc files.
+# Note that this doesn't create .elc files.  It only recompiles if an
+# .elc is present.
+
+recompile: doit
+	set EMACSLOADPATH=$(lisp)
+	$(SETLOADPATH) $(emacs) -f batch-byte-recompile-directory .
+
+# Prepare a bootstrap in the lisp subdirectory.  Build loaddefs.el,
+# because it's not sure it's up-to-date, and if it's not, that might
+# lead to errors during the bootstrap because something fails to
+# autoload as expected.  Remove compiled Lisp files so that
+# bootstrap-emacs will be built from sources only.
+
+# Need separate version for sh and native cmd.exe
+bootstrap-clean: bootstrap-clean-$(SHELLTYPE)
+
+bootstrap-clean-CMD:
+	if exist $(EMACS) $(MAKE) $(MFLAGS) autoloads
+	-for %f in ($(lisp) $(WINS)) do for %g in (%f\*.elc) do @$(DEL) %g
+
+bootstrap-clean-SH:
+	if test -f $(EMACS); then $(MAKE) $(MFLAGS) autoloads; fi
+	-rm -f $(lisp)/*.elc $(lisp)/*/*.elc
+
+# Generate/update files for the bootstrap process.
+
+bootstrap: autoloads compile-files custom-deps
+
+#
+# Assuming INSTALL_DIR is defined, copy the elisp files to it
+# Windows 95 makes this harder than it should be.
+#
+install:
+		- mkdir "$(INSTALL_DIR)/lisp"
+		- $(DEL) ../same-dir.tst
+		- $(DEL) "$(INSTALL_DIR)/same-dir.tst"
+		echo SameDirTest > "$(INSTALL_DIR)/same-dir.tst"
+#ifdef COPY_LISP_SOURCE
+		$(IFNOTSAMEDIR) $(CP_DIR) . "$(INSTALL_DIR)/lisp" $(ENDIF)
+#else
+#		$(IFNOTSAMEDIR) $(CP_DIR) *.elc "$(INSTALL_DIR)/lisp" $(ENDIF)
+#		$(IFNOTSAMEDIR) $(CP) cus-load.el "$(INSTALL_DIR)/lisp" $(ENDIF)
+#		$(IFNOTSAMEDIR) $(CP) forms*.el "$(INSTALL_DIR)/lisp" $(ENDIF)
+#		$(IFNOTSAMEDIR) $(CP) patcomp.el "$(INSTALL_DIR)/lisp" $(ENDIF)
+#		$(IFNOTSAMEDIR) $(CP) subdirs.el "$(INSTALL_DIR)/lisp" $(ENDIF)
+#		$(IFNOTSAMEDIR) $(CP) version.el "$(INSTALL_DIR)/lisp" $(ENDIF)
+#		$(IFNOTSAMEDIR) $(CP) mail/blessmail.el "$(INSTALL_DIR)/lisp/mail" $(ENDIF)
+#		$(IFNOTSAMEDIR) $(CP) mail/sc.el "$(INSTALL_DIR)/lisp/mail" $(ENDIF)
+#		$(IFNOTSAMEDIR) $(CP) play/bruce.el "$(INSTALL_DIR)/lisp/play" $(ENDIF)
+#		$(IFNOTSAMEDIR) $(CP) international/latin-*.el "$(INSTALL_DIR)/lisp/international" $(ENDIF)
+#		$(IFNOTSAMEDIR) $(CP) international/mule-conf.el "$(INSTALL_DIR)/lisp/international" $(ENDIF)
+#endif
+		- $(DEL) ../same-dir.tst
+		- $(DEL) "$(INSTALL_DIR)/same-dir.tst"
+
+#
+# Maintenance
+# 
+clean:
+		- $(DEL) *~