diff lisp/mh-e/mh-loaddefs.el @ 49459:06b77df47802

* mh-e: Created directory. ChangeLog will appear in a week when we release version 7.2. * lisp/mail/mh-alias.el, lisp/mail/mh-comp.el, lisp/mail/mh-customize.el, lisp/mail/mh-e.el, lisp/mail/mh-funcs.el, lisp/mail/mh-identity.el, lisp/mail/mh-index.el, lisp/mail/mh-loaddefs.el, lisp/mail/mh-mime.el, lisp/mail/mh-pick.el, lisp/mail/mh-seq.el, lisp/mail/mh-speed.el, lisp/mail/mh-utils.el, lisp/mail/mh-xemacs-compat.el: Moved to mh-e. Note that reply2.pbm and reply2.xpm, which were created by the MH-E package, were left in mail since they can probably be used by other mail packages. * makefile.w32-in (WINS): Added mh-e. * makefile.nt (WINS): Added mh-e.

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/lisp/mh-e/mh-loaddefs.el	Sun Jan 26 02:38:37 2003 +0000
@@ -0,0 +1,880 @@
+;;; mh-loaddefs.el --- automatically extracted autoloads
+;;
+;;; Commentary:
+;;; Code:
+
+;;;### (autoloads (mh-letter-complete mh-open-line mh-fully-kill-draft
+;;;;;;  mh-yank-cur-msg mh-insert-letter mh-send-letter mh-check-whom
+;;;;;;  mh-insert-signature mh-to-fcc mh-to-field mh-fill-paragraph-function
+;;;;;;  mh-send-other-window mh-send mh-reply mh-redistribute mh-forward
+;;;;;;  mh-extract-rejected-mail mh-edit-again) "mh-comp" "mh-comp.el"
+;;;;;;  (15899 19356))
+;;; Generated autoloads from mh-comp.el
+
+(autoload (quote mh-edit-again) "mh-comp" "\
+Clean up a draft or a message MSG previously sent and make it resendable.
+Default is the current message.
+The variable `mh-new-draft-cleaned-headers' specifies the headers to remove.
+See also documentation for `\\[mh-send]' function." t nil)
+
+(autoload (quote mh-extract-rejected-mail) "mh-comp" "\
+Extract message MSG returned by the mail system and make it resendable.
+Default is the current message.  The variable `mh-new-draft-cleaned-headers'
+gives the headers to clean out of the original message.
+See also documentation for `\\[mh-send]' function." t nil)
+
+(autoload (quote mh-forward) "mh-comp" "\
+Forward one or more messages to the recipients TO and CC.
+
+Use the optional MSG-OR-SEQ to specify a message or sequence to forward.
+
+Default is the displayed message.  If optional prefix argument is given then
+prompt for the message sequence.  If variable `transient-mark-mode' is non-nil
+and the mark is active, then the selected region is forwarded.
+See also documentation for `\\[mh-send]' function." t nil)
+
+(autoload (quote mh-redistribute) "mh-comp" "\
+Redistribute displayed message to recipients TO and CC.
+Use optional argument MSG to redistribute another message.
+Depending on how your copy of MH was compiled, you may need to change the
+setting of the variable `mh-redist-full-contents'.  See its documentation." t nil)
+
+(autoload (quote mh-reply) "mh-comp" "\
+Reply to MESSAGE (default: current message).
+If the optional argument REPLY-TO is not given, prompts for type of addresses
+to reply to:
+   from    sender only,
+   to      sender and primary recipients,
+   cc/all  sender and all recipients.
+If optional prefix argument INCLUDEP provided, then include the message
+in the reply using filter `mhl.reply' in your MH directory.
+If the file named by `mh-repl-formfile' exists, it is used as a skeleton
+for the reply.  See also documentation for `\\[mh-send]' function." t nil)
+
+(autoload (quote mh-send) "mh-comp" "\
+Compose and send a letter.
+
+Do not call this function from outside MH-E; use \\[mh-smail] instead.
+
+The file named by `mh-comp-formfile' will be used as the form.
+The letter is composed in `mh-letter-mode'; see its documentation for more
+details.
+If `mh-compose-letter-function' is defined, it is called on the draft and
+passed three arguments: TO, CC, and SUBJECT." t nil)
+
+(autoload (quote mh-send-other-window) "mh-comp" "\
+Compose and send a letter in another window.
+
+Do not call this function from outside MH-E; use \\[mh-smail-other-window]
+instead.
+
+The file named by `mh-comp-formfile' will be used as the form.
+The letter is composed in `mh-letter-mode'; see its documentation for more
+details.
+If `mh-compose-letter-function' is defined, it is called on the draft and
+passed three arguments: TO, CC, and SUBJECT." t nil)
+
+(autoload (quote mh-fill-paragraph-function) "mh-comp" "\
+Fill paragraph at or after point.
+Prefix ARG means justify as well. This function enables `fill-paragraph' to
+work better in MH-Letter mode." t nil)
+
+(autoload (quote mh-to-field) "mh-comp" "\
+Move point to the end of a specified header field.
+The field is indicated by the previous keystroke (the last keystroke
+of the command) according to the list in the variable `mh-to-field-choices'.
+Create the field if it does not exist.  Set the mark to point before moving." t nil)
+
+(autoload (quote mh-to-fcc) "mh-comp" "\
+Insert an Fcc: FOLDER field in the current message.
+Prompt for the field name with a completion list of the current folders." t nil)
+
+(autoload (quote mh-insert-signature) "mh-comp" "\
+Insert the file named by `mh-signature-file-name' at point.
+The value of `mh-letter-insert-signature-hook' is a list of functions to be
+called, with no arguments, before the signature is actually inserted." t nil)
+
+(autoload (quote mh-check-whom) "mh-comp" "\
+Verify recipients of the current letter, showing expansion of any aliases." t nil)
+
+(autoload (quote mh-send-letter) "mh-comp" "\
+Send the draft letter in the current buffer.
+If optional prefix argument ARG is provided, monitor delivery.
+The value of `mh-before-send-letter-hook' is a list of functions to be called,
+with no arguments, before doing anything.
+Run `\\[mh-edit-mhn]' if variable `mh-mhn-compose-insert-flag' is set.
+Run `\\[mh-mml-to-mime]' if variable `mh-mml-compose-insert-flag' is set.
+Insert X-Mailer field if variable `mh-insert-x-mailer-flag' is set.
+Insert X-Face field if the file specified by `mh-x-face-file' exists." t nil)
+
+(autoload (quote mh-insert-letter) "mh-comp" "\
+Insert a message into the current letter.
+Removes the header fields according to the variable `mh-invisible-headers'.
+Prefixes each non-blank line with `mh-ins-buf-prefix', unless
+`mh-yank-from-start-of-msg' is set for supercite in which case supercite is
+used to format the message.
+Prompts for FOLDER and MESSAGE.  If prefix argument VERBATIM provided, do
+not indent and do not delete headers.  Leaves the mark before the letter
+and point after it." t nil)
+
+(autoload (quote mh-yank-cur-msg) "mh-comp" "\
+Insert the current message into the draft buffer.
+Prefix each non-blank line in the message with the string in
+`mh-ins-buf-prefix'.  If a region is set in the message's buffer, then
+only the region will be inserted.  Otherwise, the entire message will
+be inserted if `mh-yank-from-start-of-msg' is non-nil.  If this variable
+is nil, the portion of the message following the point will be yanked.
+If `mh-delete-yanked-msg-window-flag' is non-nil, any window displaying the
+yanked message will be deleted." t nil)
+
+(autoload (quote mh-fully-kill-draft) "mh-comp" "\
+Kill the draft message file and the draft message buffer.
+Use \\[kill-buffer] if you don't want to delete the draft message file." t nil)
+
+(autoload (quote mh-open-line) "mh-comp" "\
+Insert a newline and leave point after it.
+In addition, insert newline and quoting characters before text after point.
+This is useful in breaking up paragraphs in replies." t nil)
+
+(autoload (quote mh-letter-complete) "mh-comp" "\
+Perform completion on header field or word preceding point.
+Alias completion is done within the mail header on selected fields and
+by the function designated by `mh-letter-complete-function' elsewhere,
+passing the prefix ARG if any." t nil)
+
+;;;***
+
+;;;### (autoloads (mh-tool-bar-folder-set mh-tool-bar-letter-set
+;;;;;;  mh-customize) "mh-customize" "mh-customize.el" (15899 29873))
+;;; Generated autoloads from mh-customize.el
+
+(autoload (quote mh-customize) "mh-customize" "\
+Customize MH-E variables." t nil)
+
+(autoload (quote mh-tool-bar-letter-set) "mh-customize" "\
+Construct toolbar for `mh-letter-mode'." nil nil)
+
+(autoload (quote mh-tool-bar-folder-set) "mh-customize" "\
+Construct toolbar for `mh-folder-mode'." nil nil)
+
+;;;***
+
+;;;### (autoloads (mh-goto-cur-msg mh-update-sequences mh-folder-line-matches-show-buffer-p)
+;;;;;;  "mh-e" "mh-e.el" (15899 29921))
+;;; Generated autoloads from mh-e.el
+
+(autoload (quote mh-folder-line-matches-show-buffer-p) "mh-e" "\
+Return t if the message under point in folder-mode is in the show buffer.
+Return nil in any other circumstance (no message under point, no show buffer,
+the message in the show buffer doesn't match." nil nil)
+
+(autoload (quote mh-update-sequences) "mh-e" "\
+Update MH's Unseen-Sequence and current folder and message.
+Flush MH-E's state out to MH. The message at the cursor becomes current." t nil)
+
+(autoload (quote mh-goto-cur-msg) "mh-e" "\
+Position the cursor at the current message.
+When optional argument MINIMAL-CHANGES-FLAG is non-nil, the function doesn't
+recenter the folder buffer." nil nil)
+
+;;;***
+
+;;;### (autoloads (mh-prefix-help mh-help mh-store-buffer mh-store-msg
+;;;;;;  mh-undo-folder mh-sort-folder mh-print-msg mh-page-digest-backwards
+;;;;;;  mh-page-digest mh-pipe-msg mh-pack-folder mh-list-folders
+;;;;;;  mh-kill-folder mh-copy-msg mh-burst-digest) "mh-funcs" "mh-funcs.el"
+;;;;;;  (15886 19303))
+;;; Generated autoloads from mh-funcs.el
+
+(autoload (quote mh-burst-digest) "mh-funcs" "\
+Burst apart the current message, which should be a digest.
+The message is replaced by its table of contents and the messages from the
+digest are inserted into the folder after that message." t nil)
+
+(autoload (quote mh-copy-msg) "mh-funcs" "\
+Copy the specified MSG-OR-SEQ to another FOLDER without deleting them.
+Default is the displayed message. If optional prefix argument is provided,
+then prompt for the message sequence." t nil)
+
+(autoload (quote mh-kill-folder) "mh-funcs" "\
+Remove the current folder and all included messages.
+Removes all of the messages (files) within the specified current folder,
+and then removes the folder (directory) itself.
+The value of `mh-folder-list-change-hook' is a list of functions to be called,
+with no arguments, after the folders has been removed." t nil)
+
+(autoload (quote mh-list-folders) "mh-funcs" "\
+List mail folders." t nil)
+
+(autoload (quote mh-pack-folder) "mh-funcs" "\
+Renumber the messages of a folder to be 1..n.
+First, offer to execute any outstanding commands for the current folder. If
+optional prefix argument provided, prompt for the RANGE of messages to display
+after packing. Otherwise, show the entire folder." t nil)
+
+(autoload (quote mh-pipe-msg) "mh-funcs" "\
+Pipe the current message through the given shell COMMAND.
+If INCLUDE-HEADERS (prefix argument) is provided, send the entire message.
+Otherwise just send the message's body without the headers." t nil)
+
+(autoload (quote mh-page-digest) "mh-funcs" "\
+Advance displayed message to next digested message." t nil)
+
+(autoload (quote mh-page-digest-backwards) "mh-funcs" "\
+Back up displayed message to previous digested message." t nil)
+
+(autoload (quote mh-print-msg) "mh-funcs" "\
+Print MSG-OR-SEQ (default: displayed message) on printer.
+If optional prefix argument provided, then prompt for the message sequence.
+The variable `mh-lpr-command-format' is used to generate the print command.
+The messages are formatted by mhl. See the variable `mhl-formfile'." t nil)
+
+(autoload (quote mh-sort-folder) "mh-funcs" "\
+Sort the messages in the current folder by date.
+Calls the MH program sortm to do the work.
+The arguments in the list `mh-sortm-args' are passed to sortm if the optional
+argument EXTRA-ARGS is given." t nil)
+
+(autoload (quote mh-undo-folder) "mh-funcs" "\
+Undo all pending deletes and refiles in current folder.
+Argument IGNORE is deprecated." t nil)
+
+(autoload (quote mh-store-msg) "mh-funcs" "\
+Store the file(s) contained in the current message into DIRECTORY.
+The message can contain a shar file or uuencoded file.
+Default directory is the last directory used, or initially the value of
+`mh-store-default-directory' or the current directory." t nil)
+
+(autoload (quote mh-store-buffer) "mh-funcs" "\
+Store the file(s) contained in the current buffer into DIRECTORY.
+The buffer can contain a shar file or uuencoded file.
+Default directory is the last directory used, or initially the value of
+`mh-store-default-directory' or the current directory." t nil)
+
+(autoload (quote mh-help) "mh-funcs" "\
+Display cheat sheet for the MH-Folder commands in minibuffer." t nil)
+
+(autoload (quote mh-prefix-help) "mh-funcs" "\
+Display cheat sheet for the commands of the current prefix in minibuffer." t nil)
+
+;;;***
+
+;;;### (autoloads (mh-insert-identity mh-identity-list-set mh-identity-make-menu)
+;;;;;;  "mh-identity" "mh-identity.el" (15852 60439))
+;;; Generated autoloads from mh-identity.el
+
+(autoload (quote mh-identity-make-menu) "mh-identity" "\
+Build (or rebuild) the Identity menu (e.g. after the list is modified)." nil nil)
+
+(autoload (quote mh-identity-list-set) "mh-identity" "\
+Update the `mh-identity-list' variable, and rebuild the menu.
+Sets the default for SYMBOL (e.g. `mh-identity-list') to VALUE (as set in
+customization).  This is called after 'customize is used to alter
+`mh-identity-list'." nil nil)
+
+(autoload (quote mh-insert-identity) "mh-identity" "\
+Insert proper fields for given IDENTITY.
+Edit the `mh-identity-list' variable to define identity." t nil)
+
+;;;***
+
+;;;### (autoloads (mh-namazu-execute-search mh-swish++-execute-search
+;;;;;;  mh-swish-execute-search mh-glimpse-execute-search mh-index-execute-commands
+;;;;;;  mh-index-visit-folder mh-index-delete-folder-headers mh-index-insert-folder-headers
+;;;;;;  mh-index-previous-folder mh-index-next-folder mh-index-search
+;;;;;;  mh-index-update-maps) "mh-index" "mh-index.el" (15899 19358))
+;;; Generated autoloads from mh-index.el
+
+(autoload (quote mh-index-update-maps) "mh-index" "\
+Annotate all as yet unannotated messages in FOLDER with their MD5 hash.
+As a side effect msg -> checksum map is updated. Optional argument ORIGIN-MAP
+is a hashtable which maps each message in the index folder to the original
+folder and message from whence it was copied. If present the
+checksum -> (origin-folder, origin-index) map is updated too." nil nil)
+
+(autoload (quote mh-index-search) "mh-index" "\
+Perform an indexed search in an MH mail folder.
+
+If REDO-SEARCH-FLAG is non-nil and the current folder buffer was generated by a
+index search, then the search is repeated. Otherwise, FOLDER is searched with
+SEARCH-REGEXP and the results are presented in an MH-E folder. If FOLDER is
+\"+\" then mail in all folders are searched.
+
+Four indexing programs are supported; if none of these are present, then grep
+is used. This function picks the first program that is available on your
+system. If you would prefer to use a different program, set the customization
+variable `mh-index-program' accordingly.
+
+The documentation for the following functions describes how to generate the
+index for each program:
+
+    - `mh-swish++-execute-search'
+    - `mh-swish-execute-search'
+    - `mh-namazu-execute-search'
+    - `mh-glimpse-execute-search'
+
+This and related functions use an X-MHE-Checksum header to cache the MD5
+checksum of a message. This means that already present X-MHE-Checksum headers
+in the incoming email could result in messages not being found. The following
+procmail recipe should avoid this:
+
+  :0 wf
+  | formail -R \"X-MHE-Checksum\" \"Old-X-MHE-Checksum\"
+
+This has the effect of renaming already present X-MHE-Checksum headers." t nil)
+
+(autoload (quote mh-index-next-folder) "mh-index" "\
+Jump to the next folder marker.
+The function is only applicable to folders displaying index search results.
+With non-nil optional argument BACKWARD-FLAG, jump to the previous group of
+results." t nil)
+
+(autoload (quote mh-index-previous-folder) "mh-index" "\
+Jump to the previous folder marker." t nil)
+
+(autoload (quote mh-index-insert-folder-headers) "mh-index" "\
+Annotate the search results with original folder names." nil nil)
+
+(autoload (quote mh-index-delete-folder-headers) "mh-index" "\
+Delete the folder headers." nil nil)
+
+(autoload (quote mh-index-visit-folder) "mh-index" "\
+Visit original folder from where the message at point was found." t nil)
+
+(autoload (quote mh-index-execute-commands) "mh-index" "\
+Delete/refile the actual messages.
+The copies in the searched folder are then deleted/refiled to get the desired
+result. Before deleting the messages we make sure that the message being
+deleted is identical to the one that the user has marked in the index buffer." nil nil)
+
+(autoload (quote mh-glimpse-execute-search) "mh-index" "\
+Execute glimpse and read the results.
+
+In the examples below, replace /home/user/Mail with the path to your MH
+directory.
+
+First create the directory /home/user/Mail/.glimpse. Then create the file
+/home/user/Mail/.glimpse/.glimpse_exclude with the following contents:
+
+    */.*
+    */#*
+    */,*
+    */*~
+    ^/home/user/Mail/.glimpse
+    ^/home/user/Mail/mhe-index
+
+If there are any directories you would like to ignore, append lines like the
+following to .glimpse_exclude:
+
+    ^/home/user/Mail/scripts
+
+You do not want to index the folders that hold the results of your searches
+since they tend to be ephemeral and the original messages are indexed anyway.
+The configuration file above assumes that the results are found in sub-folders
+of `mh-index-folder' which is +mhe-index by default.
+
+Use the following command line to generate the glimpse index. Run this
+daily from cron:
+
+    glimpseindex -H /home/user/Mail/.glimpse /home/user/Mail
+
+FOLDER-PATH is the directory in which SEARCH-REGEXP is used to search." nil nil)
+
+(autoload (quote mh-swish-execute-search) "mh-index" "\
+Execute swish-e and read the results.
+
+In the examples below, replace /home/user/Mail with the path to your MH
+directory.
+
+First create the directory /home/user/Mail/.swish. Then create the file
+/home/user/Mail/.swish/config with the following contents:
+
+    IndexDir /home/user/Mail
+    IndexFile /home/user/Mail/.swish/index
+    IndexName \"Mail Index\"
+    IndexDescription \"Mail Index\"
+    IndexPointer \"http://nowhere\"
+    IndexAdmin \"nobody\"
+    #MetaNames automatic
+    IndexReport 3
+    FollowSymLinks no
+    UseStemming no
+    IgnoreTotalWordCountWhenRanking yes
+    WordCharacters abcdefghijklmnopqrstuvwxyz0123456789-
+    BeginCharacters abcdefghijklmnopqrstuvwxyz
+    EndCharacters abcdefghijklmnopqrstuvwxyz0123456789
+    IgnoreLimit 50 1000
+    IndexComments 0
+    FileRules pathname contains /home/user/Mail/.swish
+    FileRules pathname contains /home/user/Mail/mhe-index
+    FileRules filename is index
+    FileRules filename is ..*
+    FileRules filename is #.*
+    FileRules filename is ,.*
+    FileRules filename is .*~
+
+If there are any directories you would like to ignore, append lines like the
+following to config:
+
+    FileRules pathname contains /home/user/Mail/scripts
+
+You do not want to index the folders that hold the results of your searches
+since they tend to be ephemeral and the original messages are indexed anyway.
+The configuration file above assumes that the results are found in sub-folders
+of `mh-index-folder' which is +mhe-index by default.
+
+Use the following command line to generate the swish index. Run this
+daily from cron:
+
+    swish-e -c /home/user/Mail/.swish/config
+
+FOLDER-PATH is the directory in which SEARCH-REGEXP is used to search." nil nil)
+
+(autoload (quote mh-swish++-execute-search) "mh-index" "\
+Execute swish++ and read the results.
+
+In the examples below, replace /home/user/Mail with the path to your MH
+directory.
+
+First create the directory /home/user/Mail/.swish++. Then create the file
+/home/user/Mail/.swish++/swish++.conf with the following contents:
+
+    IncludeMeta         Bcc Cc Comments Content-Description From Keywords
+    IncludeMeta         Newsgroups Resent-To Subject To
+    IncludeMeta         Message-Id References In-Reply-To
+    IncludeFile         Mail    *
+    IndexFile           /home/user/Mail/.swish++/swish++.index
+
+Use the following command line to generate the swish index. Run this
+daily from cron:
+
+ find /home/user/Mail -path /home/user/Mail/mhe-index -prune \\
+                   -o -path /home/user/Mail/.swish++ -prune \\
+                   -o -name \"[0-9]*\" -print \\
+    | index -c /home/user/Mail/.swish++/swish++.conf /home/user/Mail
+
+You do not want to index the folders that hold the results of your searches
+since they tend to be ephemeral and the original messages are indexed anyway.
+The command above assumes that the results are found in sub-folders of
+`mh-index-folder' which is +mhe-index by default.
+
+On some systems (Debian GNU/Linux, for example), use index++ instead of index.
+
+FOLDER-PATH is the directory in which SEARCH-REGEXP is used to search." nil nil)
+
+(autoload (quote mh-namazu-execute-search) "mh-index" "\
+Execute namazu and read the results.
+
+In the examples below, replace /home/user/Mail with the path to your MH
+directory.
+
+First create the directory /home/user/Mail/.namazu. Then create the file
+/home/user/Mail/.namazu/mknmzrc with the following contents:
+
+    package conf;  # Don't remove this line!
+    $ADDRESS = 'user@localhost';
+    $ALLOW_FILE = \"[0-9]*\";
+    $EXCLUDE_PATH = \"^/home/user/Mail/(mhe-index|spam)\";
+
+In the above example configuration, none of the mail files contained in the
+directories /home/user/Mail/mhe-index and /home/user/Mail/spam are indexed.
+
+You do not want to index the folders that hold the results of your searches
+since they tend to be ephemeral and the original messages are indexed anyway.
+The configuration file above assumes that the results are found in sub-folders
+of `mh-index-folder' which is +mhe-index by default.
+
+Use the following command line to generate the namazu index. Run this
+daily from cron:
+
+   mknmz -f /home/user/Mail/.namazu/mknmzrc -O /home/user/Mail/.namazu \\
+         /home/user/Mail
+
+FOLDER-PATH is the directory in which SEARCH-REGEXP is used to search." nil nil)
+
+;;;***
+
+;;;### (autoloads (mh-mime-inline-part mh-mime-save-part mh-push-button
+;;;;;;  mh-press-button mh-mime-display mh-mime-save-parts mh-display-emphasis
+;;;;;;  mh-display-smileys mh-add-missing-mime-version-header mh-destroy-postponed-handles
+;;;;;;  mh-mime-cleanup mh-mml-secure-message-encrypt-pgpmime mh-mml-secure-message-sign-pgpmime
+;;;;;;  mh-mml-attach-file mh-mml-forward-message mh-mml-to-mime
+;;;;;;  mh-revert-mhn-edit mh-edit-mhn mh-mhn-compose-forw mh-mhn-compose-external-compressed-tar
+;;;;;;  mh-mhn-compose-anon-ftp mh-mhn-compose-insertion mh-compose-forward
+;;;;;;  mh-compose-insertion) "mh-mime" "mh-mime.el" (15858 6046))
+;;; Generated autoloads from mh-mime.el
+
+(autoload (quote mh-compose-insertion) "mh-mime" "\
+Add a directive to insert a MIME part from a file, using mhn or gnus.
+If the variable `mh-compose-insertion' is set to 'mhn, then that will be used.
+If it is set to 'gnus, then that will be used instead.
+Optional argument INLINE means make it an inline attachment." t nil)
+
+(autoload (quote mh-compose-forward) "mh-mime" "\
+Add a MIME directive to forward a message, using mhn or gnus.
+If the variable `mh-compose-insertion' is set to 'mhn, then that will be used.
+If it is set to 'gnus, then that will be used instead.
+Optional argument DESCRIPTION is a description of the attachment.
+Optional argument FOLDER is the folder from which the forwarded message should
+come.
+Optional argument MESSAGE is the message to forward.
+If any of the optional arguments are absent, they are prompted for." t nil)
+
+(autoload (quote mh-mhn-compose-insertion) "mh-mime" "\
+Add a directive to insert a MIME message part from a file.
+This is the typical way to insert non-text parts in a message.
+
+Arguments are FILENAME, which tells where to find the file, TYPE, the MIME
+content type, DESCRIPTION, a line of text for the Content-Description field.
+ATTRIBUTES is a comma separated list of name=value pairs that is appended to
+the Content-Type field of the attachment.
+
+See also \\[mh-edit-mhn]." t nil)
+
+(autoload (quote mh-mhn-compose-anon-ftp) "mh-mime" "\
+Add a directive for a MIME anonymous ftp external body part.
+This directive tells MH to include a reference to a message/external-body part
+retrievable by anonymous FTP.
+
+Arguments are HOST and FILENAME, which tell where to find the file, TYPE, the
+MIME content type, and DESCRIPTION, a line of text for the Content-description
+header.
+
+See also \\[mh-edit-mhn]." t nil)
+
+(autoload (quote mh-mhn-compose-external-compressed-tar) "mh-mime" "\
+Add a directive to include a MIME reference to a compressed tar file.
+The file should be available via anonymous ftp. This directive tells MH to
+include a reference to a message/external-body part.
+
+Arguments are HOST and FILENAME, which tell where to find the file, and
+DESCRIPTION, a line of text for the Content-description header.
+
+See also \\[mh-edit-mhn]." t nil)
+
+(autoload (quote mh-mhn-compose-forw) "mh-mime" "\
+Add a forw directive to this message, to forward a message with MIME.
+This directive tells MH to include the named messages in this one.
+
+Arguments are DESCRIPTION, a line of text for the Content-description header,
+and FOLDER and MESSAGES, which name the message(s) to be forwarded.
+
+See also \\[mh-edit-mhn]." t nil)
+
+(autoload (quote mh-edit-mhn) "mh-mime" "\
+Format the current draft for MIME, expanding any mhn directives.
+
+Process the current draft with the mhn program, which, using directives
+already inserted in the draft, fills in all the MIME components and header
+fields.
+
+This step should be done last just before sending the message.
+
+The `\\[mh-revert-mhn-edit]' command undoes this command. The arguments in the
+list `mh-mhn-args' are passed to mhn if this function is passed an optional
+prefix argument EXTRA-ARGS.
+
+For assistance with creating mhn directives to insert various types of
+components in a message, see \\[mh-mhn-compose-insertion] (generic insertion
+from a file), \\[mh-mhn-compose-anon-ftp] (external reference to file via
+anonymous ftp), \\[mh-mhn-compose-external-compressed-tar] (reference to
+compressed tar file via anonymous ftp), and \\[mh-mhn-compose-forw] (forward
+message). If these helper functions are used, `mh-edit-mhn' is run
+automatically when the draft is sent.
+
+The value of `mh-edit-mhn-hook' is a list of functions to be called, with no
+arguments, after performing the conversion.
+
+The mhn program is part of MH version 6.8 or later." t nil)
+
+(autoload (quote mh-revert-mhn-edit) "mh-mime" "\
+Undo the effect of \\[mh-edit-mhn] by reverting to the backup file.
+Optional non-nil argument NOCONFIRM means don't ask for confirmation." t nil)
+
+(autoload (quote mh-mml-to-mime) "mh-mime" "\
+Compose MIME message from mml directives." t nil)
+
+(autoload (quote mh-mml-forward-message) "mh-mime" "\
+Forward a message as attachment.
+The function will prompt the user for a DESCRIPTION, a FOLDER and MESSAGE
+number." nil nil)
+
+(autoload (quote mh-mml-attach-file) "mh-mime" "\
+Attach a file to the outgoing MIME message.
+The file is not inserted or encoded until you send the message with
+`\\[mh-send-letter]'.
+Message disposition is \"inline\" or \"attachment\" and is prompted for if
+DISPOSITION is nil.
+
+This is basically `mml-attach-file' from gnus, modified such that a prefix
+argument yields an `inline' disposition and Content-Type is determined
+automatically." nil nil)
+
+(autoload (quote mh-mml-secure-message-sign-pgpmime) "mh-mime" "\
+Add directive to encrypt/sign the entire message." t nil)
+
+(autoload (quote mh-mml-secure-message-encrypt-pgpmime) "mh-mime" "\
+Add directive to encrypt and sign the entire message.
+If called with a prefix argument DONTSIGN, only encrypt (do NOT sign)." t nil)
+
+(autoload (quote mh-mime-cleanup) "mh-mime" "\
+Free the decoded MIME parts." nil nil)
+
+(autoload (quote mh-destroy-postponed-handles) "mh-mime" "\
+Free MIME data for externally displayed mime parts." nil nil)
+
+(autoload (quote mh-add-missing-mime-version-header) "mh-mime" "\
+Some mail programs don't put a MIME-Version header.
+I have seen this only in spam, so maybe we shouldn't fix this ;-)" nil nil)
+
+(autoload (quote mh-display-smileys) "mh-mime" "\
+Function to display smileys." nil nil)
+
+(autoload (quote mh-display-emphasis) "mh-mime" "\
+Function to display graphical emphasis." nil nil)
+
+(autoload (quote mh-mime-save-parts) "mh-mime" "\
+Store the MIME parts of the current message.
+If ARG, prompt for directory, else use that specified by the variable
+`mh-mime-save-parts-default-directory'. These directories may be superseded by
+mh_profile directives, since this function calls on mhstore or mhn to do the
+actual storing." t nil)
+
+(autoload (quote mh-mime-display) "mh-mime" "\
+Display (and possibly decode) MIME handles.
+Optional argument, PRE-DISSECTED-HANDLES is a list of MIME handles. If
+present they are displayed otherwise the buffer is parsed and then
+displayed." nil nil)
+
+(autoload (quote mh-press-button) "mh-mime" "\
+Press MIME button.
+If the MIME part is visible then it is removed. Otherwise the part is
+displayed." t nil)
+
+(autoload (quote mh-push-button) "mh-mime" "\
+Click MIME button for EVENT.
+If the MIME part is visible then it is removed. Otherwise the part is
+displayed. This function is called when the mouse is used to click the MIME
+button." t nil)
+
+(autoload (quote mh-mime-save-part) "mh-mime" "\
+Save MIME part at point." t nil)
+
+(autoload (quote mh-mime-inline-part) "mh-mime" "\
+Toggle display of the raw MIME part." t nil)
+
+;;;***
+
+;;;### (autoloads (mh-do-pick-search mh-search-folder) "mh-pick"
+;;;;;;  "mh-pick.el" (15854 20166))
+;;; Generated autoloads from mh-pick.el
+
+(autoload (quote mh-search-folder) "mh-pick" "\
+Search FOLDER for messages matching a pattern.
+This function uses the MH command `pick' to do the work.
+Add the messages found to the sequence named `search'." t nil)
+
+(autoload (quote mh-do-pick-search) "mh-pick" "\
+Find messages that match the qualifications in the current pattern buffer.
+Messages are searched for in the folder named in `mh-searching-folder'.
+Add the messages found to the sequence named `search'." t nil)
+
+;;;***
+
+;;;### (autoloads (mh-thread-refile mh-thread-delete mh-thread-ancestor
+;;;;;;  mh-thread-previous-sibling mh-thread-next-sibling mh-thread-forget-message
+;;;;;;  mh-toggle-threads mh-thread-add-spaces mh-thread-inc mh-delete-subject-or-thread
+;;;;;;  mh-delete-subject mh-narrow-to-subject mh-region-to-msg-list
+;;;;;;  mh-add-to-sequence mh-notate-seq mh-map-to-seq-msgs mh-rename-seq
+;;;;;;  mh-widen mh-put-msg-in-seq mh-narrow-to-seq mh-msg-is-in-seq
+;;;;;;  mh-list-sequences mh-delete-seq) "mh-seq" "mh-seq.el" (15899
+;;;;;;  19358))
+;;; Generated autoloads from mh-seq.el
+
+(autoload (quote mh-delete-seq) "mh-seq" "\
+Delete the SEQUENCE." t nil)
+
+(autoload (quote mh-list-sequences) "mh-seq" "\
+List the sequences defined in the folder being visited." t nil)
+
+(autoload (quote mh-msg-is-in-seq) "mh-seq" "\
+Display the sequences that contain MESSAGE (default: current message)." t nil)
+
+(autoload (quote mh-narrow-to-seq) "mh-seq" "\
+Restrict display of this folder to just messages in SEQUENCE.
+Use \\<mh-folder-mode-map>\\[mh-widen] to undo this command." t nil)
+
+(autoload (quote mh-put-msg-in-seq) "mh-seq" "\
+Add MSG-OR-SEQ (default: displayed message) to SEQUENCE.
+If optional prefix argument provided, then prompt for the message sequence.
+If variable `transient-mark-mode' is non-nil and the mark is active, then
+the selected region is added to the sequence." t nil)
+
+(autoload (quote mh-widen) "mh-seq" "\
+Remove restrictions from current folder, thereby showing all messages." t nil)
+
+(autoload (quote mh-rename-seq) "mh-seq" "\
+Rename SEQUENCE to have NEW-NAME." t nil)
+
+(autoload (quote mh-map-to-seq-msgs) "mh-seq" "\
+Invoke the FUNC at each message in the SEQ.
+SEQ can either be a list of messages or a MH sequence. The remaining ARGS are
+passed as arguments to FUNC." nil nil)
+
+(autoload (quote mh-notate-seq) "mh-seq" "\
+Mark the scan listing.
+All messages in SEQ are marked with NOTATION at OFFSET from the beginning of
+the line." nil nil)
+
+(autoload (quote mh-add-to-sequence) "mh-seq" "\
+The sequence SEQ is augmented with the messages in MSGS." nil nil)
+
+(autoload (quote mh-region-to-msg-list) "mh-seq" "\
+Return a list of messages within the region between BEGIN and END." nil nil)
+
+(autoload (quote mh-narrow-to-subject) "mh-seq" "\
+Narrow to a sequence containing all following messages with same subject." t nil)
+
+(autoload (quote mh-delete-subject) "mh-seq" "\
+Mark all following messages with same subject to be deleted.
+This puts the messages in a sequence named subject.  You can undo the last
+deletion marks using `mh-undo' with a prefix argument and then specifying the
+subject sequence." t nil)
+
+(autoload (quote mh-delete-subject-or-thread) "mh-seq" "\
+Mark messages for deletion intelligently.
+If the folder is threaded then `mh-thread-delete' is used to mark the current
+message and all its descendants for deletion. Otherwise `mh-delete-subject' is
+used to mark the current message and all messages following it with the same
+subject for deletion." t nil)
+
+(autoload (quote mh-thread-inc) "mh-seq" "\
+Update thread tree for FOLDER.
+All messages after START-POINT are added to the thread tree." nil nil)
+
+(autoload (quote mh-thread-add-spaces) "mh-seq" "\
+Add COUNT spaces to each scan line in `mh-thread-scan-line-map'." nil nil)
+
+(autoload (quote mh-toggle-threads) "mh-seq" "\
+Toggle threaded view of folder.
+The conversion of normal view to threaded view is exact, that is the same
+messages are displayed in the folder buffer before and after threading. However
+the conversion from threaded view to normal view is inexact. So more messages
+than were originally present may be shown as a result." t nil)
+
+(autoload (quote mh-thread-forget-message) "mh-seq" "\
+Forget the message INDEX from the threading tables." nil nil)
+
+(autoload (quote mh-thread-next-sibling) "mh-seq" "\
+Jump to next sibling.
+With non-nil optional argument PREVIOUS-FLAG jump to the previous sibling." t nil)
+
+(autoload (quote mh-thread-previous-sibling) "mh-seq" "\
+Jump to previous sibling." t nil)
+
+(autoload (quote mh-thread-ancestor) "mh-seq" "\
+Jump to the ancestor of current message.
+If optional argument THREAD-ROOT-FLAG is non-nil then jump to the root of the
+thread tree the message belongs to." t nil)
+
+(autoload (quote mh-thread-delete) "mh-seq" "\
+Mark current message and all its children for subsequent deletion." t nil)
+
+(autoload (quote mh-thread-refile) "mh-seq" "\
+Mark current message and all its children for refiling to FOLDER." t nil)
+
+;;;***
+
+;;;### (autoloads (mh-speed-add-folder mh-speed-invalidate-map mh-speed-flists
+;;;;;;  mh-speed-view mh-speed-toggle mh-folder-speedbar-buttons)
+;;;;;;  "mh-speed" "mh-speed.el" (15899 19358))
+;;; Generated autoloads from mh-speed.el
+
+(autoload (quote mh-folder-speedbar-buttons) "mh-speed" "\
+Interface function to create MH-E speedbar buffer.
+BUFFER is the MH-E buffer for which the speedbar buffer is to be created." nil nil)
+
+(defalias (quote mh-show-speedbar-buttons) (quote mh-folder-speedbar-buttons))
+
+(defalias (quote mh-letter-speedbar-buttons) (quote mh-folder-speedbar-buttons))
+
+(autoload (quote mh-speed-toggle) "mh-speed" "\
+Toggle the display of child folders.
+The otional ARGS are ignored and there for compatibilty with speedbar." t nil)
+
+(autoload (quote mh-speed-view) "mh-speed" "\
+View folder on current line.
+Optional ARGS are ignored." t nil)
+
+(autoload (quote mh-speed-flists) "mh-speed" "\
+Execute flists -recurse and update message counts.
+If FORCE is non-nil the timer is reset." t nil)
+
+(autoload (quote mh-speed-invalidate-map) "mh-speed" "\
+Remove FOLDER from various optimization caches." t nil)
+
+(autoload (quote mh-speed-add-folder) "mh-speed" "\
+Add FOLDER since it is being created.
+The function invalidates the latest ancestor that is present." nil nil)
+
+;;;***
+
+;;;### (autoloads (mh-get-msg-num mh-goto-address-find-address-at-point)
+;;;;;;  "mh-utils" "mh-utils.el" (15899 28827))
+;;; Generated autoloads from mh-utils.el
+
+(autoload (quote mh-goto-address-find-address-at-point) "mh-utils" "\
+Find e-mail address around or before point.
+Then search backwards to beginning of line for the start of an e-mail
+address.  If no e-mail address found, return nil." nil nil)
+
+(autoload (quote mh-get-msg-num) "mh-utils" "\
+Return the message number of the displayed message.
+If the argument ERROR-IF-NO-MESSAGE is non-nil, then complain if the cursor is
+not pointing to a message." nil nil)
+
+;;;***
+
+;;;### (autoloads (mh-alias-add-address-under-point mh-alias-grab-from-field
+;;;;;;  mh-alias-add-alias mh-alias-from-has-no-alias-p mh-alias-letter-expand-alias
+;;;;;;  mh-alias-minibuffer-confirm-address mh-read-address mh-alias-reload)
+;;;;;;  "mh-alias" "mh-alias.el" (15899 29102))
+;;; Generated autoloads from mh-alias.el
+
+(autoload (quote mh-alias-reload) "mh-alias" "\
+Load MH aliases into `mh-alias-alist'." t nil)
+
+(autoload (quote mh-read-address) "mh-alias" "\
+Read an address from the minibuffer with PROMPT." nil nil)
+
+(autoload (quote mh-alias-minibuffer-confirm-address) "mh-alias" "\
+Display the alias expansion if `mh-alias-flash-on-comma' is non-nil." t nil)
+
+(autoload (quote mh-alias-letter-expand-alias) "mh-alias" "\
+Expand mail alias before point." nil nil)
+
+(autoload (quote mh-alias-from-has-no-alias-p) "mh-alias" "\
+Return t is From has no current alias set." nil nil)
+
+(autoload (quote mh-alias-add-alias) "mh-alias" "\
+*Add ALIAS for ADDRESS in personal alias file.
+Prompts for confirmation if the address already has an alias.
+If the alias is already is use, `mh-alias-add-alias-to-file' will prompt." t nil)
+
+(autoload (quote mh-alias-grab-from-field) "mh-alias" "\
+*Add ALIAS for ADDRESS in personal alias file.
+Prompts for confirmation if the alias is already in use or if the address
+already has an alias." t nil)
+
+(autoload (quote mh-alias-add-address-under-point) "mh-alias" "\
+Insert an alias for email address under point." t nil)
+
+;;;***
+
+(provide 'mh-loaddefs)
+;;; Local Variables:
+;;; version-control: never
+;;; no-byte-compile: t
+;;; no-update-autoloads: t
+;;; End:
+;;; mh-loaddefs.el ends here