Mercurial > emacs
diff src/fileio.c @ 15097:32c26cb9e078
(Fexpand_file_name, Ffile_name_absolute_p): Doc fixes.
(Ffile_exists_p, Ffile_executable_p, Ffile_readable_p)
(Ffile_writable_p, Ffile_directory_p, Ffile_regular_p)
(Ffile_modes, Fset_file_modes, Ffile_newer_than_file_p)
(expand_and_dir_to_file): Rename abspath to absname.
(CORRECT_DIR_SEPS) [DOS_NT]: New macro.
(IS_DRIVE) [DOS_NT]: Added separate definitions for DOS and NT.
(Ffile_name_directory) [DOS_NT]: Simplify code to match change in
getdefdir in msdos.c. Ignore embedded colons. Correct dir seps.
(Ffile_name_nondirectory) [DOS_NT]: Ignore embedded colons.
Correct IS_ANY_SEP to IS_DIRECTORY_SEP.
(file_name_as_directory) [DOS_NT]: Correct dir seps.
Correct IS_ANY_SEP to IS_DIRECTORY_SEP.
(directory_file_name) [DOS_NT]: Correct dir seps.
(Fmake_temp_name) [DOS_NT: Correct dir seps.
(Fexpand_file_name) [mostly DOS_NT]: Remove relpath, tmp and
defdir variables; init drive to 0.
Correctly detect when default_directory is absolute.
Be strict when looking for MSDOS drive specifier; defer calling
getdefdir. Ignore drive specifier if name now has UNC prefix.
Correctly recognise if name is not absolute when trying simple
method to expand; return original string if possible.
Skip dir sep after ~ or ~user.
Use getpwnam instead of HOME for ~user on NT.
Handle error return from getdefdir.
Correctly detect if newdir is absolute before using default_directory.
Handle case where newdir is not absolute - expand relative to
current working dir if necessary (instead of calling getdisk
later). Only keep UNC prefix if nm starts with dir sep.
Replace kludgy handling of drive spec in newdir. Correct dir seps.
(Fexpand_file_name) [!DOS_NT]: Fix incorrect expansion of
"/foo/../bar" -> "//bar".
(Fsubstitute_in_file_name) [DOS_NT]: Correct dir seps for NT as
well. Merge equivalent #ifdef APOLLO and WINDOWSNT cases. Ignore
embedded colons and be strict about drive specs.
(Fcopy_file) [DOS_NT]: Do dev/inode check on NT.
(Ffile_name_absolute_p) [DOS_NT]: Be strict about drive specs.
(check_executable) [DOS_NT]: Test st_mode on NT.
(Ffile_readable_p) [DOS_NT]: Use access instead of open on NT.
(Ffile_modes) [DOS_NT]: Don't embelish st_mode value on NT.
(Fread_file_name) [DOS_NT]: Correct dir seps in HOME.
(syms_of_fileio): Add Vdirectory_sep_char.
| author | Richard M. Stallman <rms@gnu.org> |
|---|---|
| date | Sat, 27 Apr 1996 01:14:17 +0000 |
| parents | ff25c6944c3d |
| children | b801c02f3e92 |
line wrap: on
line diff
--- a/src/fileio.c Sat Apr 27 00:52:30 1996 +0000 +++ b/src/fileio.c Sat Apr 27 01:14:17 1996 +0000 @@ -1,5 +1,5 @@ /* File IO for GNU Emacs. - Copyright (C) 1985, 86, 87, 88, 93, 94, 95 Free Software Foundation, Inc. + Copyright (C) 1985,86,87,88,93,94,95,96 Free Software Foundation, Inc. This file is part of GNU Emacs. @@ -93,6 +93,21 @@ #include <fcntl.h> #endif /* not WINDOWSNT */ +#ifdef DOS_NT +#define CORRECT_DIR_SEPS(s) \ + do { if ('/' == DIRECTORY_SEP) dostounix_filename (s); \ + else unixtodos_filename (s); \ + } while (0) +/* On Windows, drive letters must be alphabetic - on DOS, the Netware + redirector allows the six letters between 'Z' and 'a' as well. */ +#ifdef MSDOS +#define IS_DRIVE(x) ((x) >= 'A' && (x) <= 'z') +#endif +#ifdef WINDOWSNT +#define IS_DRIVE(x) isalpha (x) +#endif +#endif + #ifdef VMS #include <file.h> #include <rmsdef.h> @@ -129,7 +144,7 @@ a new file with the same mode as the original */ int auto_save_mode_bits; -/* Alist of elements (REGEXP . HANDLER) for file names +/* Alist of elements (REGEXP . HANDLER) for file names whose I/O is done with a special handler. */ Lisp_Object Vfile_name_handler_alist; @@ -160,6 +175,10 @@ Zero means use var format. */ int vms_stmlf_recfm; +/* On NT, specifies the directory separator character, used (eg.) when + expanding file names. This can be bound to / or \. */ +Lisp_Object Vdirectory_sep_char; + /* These variables describe handlers that have "already" had a chance to handle the current operation. @@ -203,7 +222,7 @@ /* Restore point, having saved it as a marker. */ restore_point_unwind (location) - Lisp_Object location; + Lisp_Object location; { SET_PT (marker_position (location)); Fset_marker (location, Qnil, Qnil); @@ -312,44 +331,38 @@ filename = FILE_SYSTEM_CASE (filename); #endif beg = XSTRING (filename)->data; +#ifdef DOS_NT + beg = strcpy (alloca (strlen (beg) + 1), beg); +#endif p = beg + XSTRING (filename)->size; - while (p != beg && !IS_ANY_SEP (p[-1]) + while (p != beg && !IS_DIRECTORY_SEP (p[-1]) #ifdef VMS && p[-1] != ':' && p[-1] != ']' && p[-1] != '>' #endif /* VMS */ +#ifdef DOS_NT + /* only recognise drive specifier at beginning */ + && !(p[-1] == ':' && p == beg + 2) +#endif ) p--; if (p == beg) return Qnil; #ifdef DOS_NT /* Expansion of "c:" to drive and default directory. */ - /* (NT does the right thing.) */ if (p == beg + 2 && beg[1] == ':') { - int drive = (*beg) - 'a'; /* MAXPATHLEN+1 is guaranteed to be enough space for getdefdir. */ - unsigned char *res = alloca (MAXPATHLEN + 5); - unsigned char *res1; -#ifdef WINDOWSNT - res1 = res; - /* The NT version places the drive letter at the beginning already. */ -#else /* not WINDOWSNT */ - /* On MSDOG we must put the drive letter in by hand. */ - res1 = res + 2; -#endif /* not WINDOWSNT */ - if (getdefdir (drive + 1, res)) + unsigned char *res = alloca (MAXPATHLEN + 1); + if (getdefdir (toupper (*beg) - 'A' + 1, res)) { -#ifdef MSDOS - res[0] = drive + 'a'; - res[1] = ':'; -#endif /* MSDOS */ - if (IS_DIRECTORY_SEP (res[strlen (res) - 1])) + if (!IS_DIRECTORY_SEP (res[strlen (res) - 1])) strcat (res, "/"); beg = res; p = beg + strlen (beg); } } + CORRECT_DIR_SEPS (beg); #endif /* DOS_NT */ return make_string (beg, p - beg); } @@ -377,10 +390,14 @@ beg = XSTRING (filename)->data; end = p = beg + XSTRING (filename)->size; - while (p != beg && !IS_ANY_SEP (p[-1]) + while (p != beg && !IS_DIRECTORY_SEP (p[-1]) #ifdef VMS && p[-1] != ':' && p[-1] != ']' && p[-1] != '>' #endif /* VMS */ +#ifdef DOS_NT + /* only recognise drive specifier at beginning */ + && !(p[-1] == ':' && p == beg + 2) +#endif ) p--; return make_string (p, end - p); @@ -476,11 +493,14 @@ } #else /* not VMS */ /* For Unix syntax, Append a slash if necessary */ - if (!IS_ANY_SEP (out[size])) + if (!IS_DIRECTORY_SEP (out[size])) { out[size + 1] = DIRECTORY_SEP; out[size + 2] = '\0'; } +#ifdef DOS_NT + CORRECT_DIR_SEPS (out); +#endif #endif /* not VMS */ return out; } @@ -519,7 +539,7 @@ * On VMS: * xyzzy:[mukesh.emacs] => xyzzy:[mukesh]emacs.dir.1 * xyzzy:[mukesh] => xyzzy:[000000]mukesh.dir.1 - * On UNIX, it's simple: just make sure there is a terminating / + * On UNIX, it's simple: just make sure there isn't a terminating / * Value is nonzero if the string output is different from the input. */ @@ -555,7 +575,7 @@ nam.nam$b_nop |= NAM$M_SYNCHK; /* We call SYS$PARSE to handle such things as [--] for us. */ - if (SYS$PARSE(&fab, 0, 0) == RMS$_NORMAL) + if (SYS$PARSE (&fab, 0, 0) == RMS$_NORMAL) { slen = nam.nam$b_esl; if (esa[slen - 1] == ';' && esa[slen - 2] == '.') @@ -624,7 +644,7 @@ then translate the device and recurse. */ if (dst[slen - 1] == ':' && dst[slen - 2] != ':' /* skip decnet nodes */ - && strcmp(src + slen, "[000000]") == 0) + && strcmp (src + slen, "[000000]") == 0) { dst[slen - 1] = '\0'; if ((ptr = egetenv (dst)) @@ -661,7 +681,7 @@ || (slen > 1 && dst[0] != '/' && dst[slen - 1] == '/')) dst[slen - 1] = 0; #else - if (slen > 1 + if (slen > 1 && IS_DIRECTORY_SEP (dst[slen - 1]) #ifdef DOS_NT && !IS_ANY_SEP (dst[slen - 2]) @@ -669,6 +689,9 @@ ) dst[slen - 1] = 0; #endif +#ifdef DOS_NT + CORRECT_DIR_SEPS (dst); +#endif return 1; } @@ -726,6 +749,9 @@ val = concat2 (prefix, build_string ("XXXXXX")); #endif mktemp (XSTRING (val)->data); +#ifdef DOS_NT + CORRECT_DIR_SEPS (XSTRING (val)->data); +#endif return val; } @@ -734,10 +760,10 @@ Second arg DEFAULT-DIRECTORY is directory to start with if NAME is relative\n\ (does not start with slash); if DEFAULT-DIRECTORY is nil or missing,\n\ the current buffer's value of default-directory is used.\n\ -Path components that are `.' are removed, and \n\ -path components followed by `..' are removed, along with the `..' itself;\n\ +File name components that are `.' are removed, and \n\ +so are file name components followed by `..', along with the `..' itself;\n\ note that these simplifications are done without checking the resulting\n\ -paths in the file system.\n\ +file names in the file system.\n\ An initial `~/' expands to your home directory.\n\ An initial `~USER/' expands to USER's home directory.\n\ See also the function `substitute-in-file-name'.") @@ -745,7 +771,7 @@ Lisp_Object name, default_directory; { unsigned char *nm; - + register unsigned char *newdir, *p, *o; int tlen; unsigned char *target; @@ -759,13 +785,11 @@ int dots = 0; #endif /* VMS */ #ifdef DOS_NT - /* Demacs 1.1.2 91/10/20 Manabu Higashida */ - int drive = -1; - int relpath = 0; - unsigned char *tmp, *defdir; + int drive = 0; #endif /* DOS_NT */ + int length; Lisp_Object handler; - + CHECK_STRING (name, 0); /* If the file name has special constructs in it, @@ -799,15 +823,22 @@ The EQ test avoids infinite recursion. */ if (! NILP (default_directory) && !EQ (default_directory, name) - /* Save time in some common cases. */ + /* Save time in some common cases - as long as default_directory + is not relative, it can be canonicalized with name below (if it + is needed at all) without requiring it to be expanded now. */ #ifdef DOS_NT - /* Detect MSDOS file names with device names. */ - && ! (XSTRING (default_directory)->size >= 3 - && IS_DEVICE_SEP (o[1]) && IS_DIRECTORY_SEP (o[2])) + /* Detect MSDOS file names with drive specifiers. */ + && ! (IS_DRIVE (o[0]) && (IS_DEVICE_SEP (o[1]) && IS_DIRECTORY_SEP (o[2]))) +#ifdef WINDOWSNT + /* Detect Windows file names in UNC format. */ + && ! (IS_DIRECTORY_SEP (o[0]) && IS_DIRECTORY_SEP (o[1])) #endif - /* Detect Unix absolute file names. */ - && ! (XSTRING (default_directory)->size >= 2 - && IS_DIRECTORY_SEP (o[0]))) +#else /* not DOS_NT */ + /* Detect Unix absolute file names (/... alone is not absolute on + DOS or Windows). */ + && ! (IS_DIRECTORY_SEP (o[0])) +#endif /* not DOS_NT */ + ) { struct gcpro gcpro1; @@ -825,29 +856,38 @@ #endif nm = XSTRING (name)->data; - -#ifdef MSDOS - /* First map all backslashes to slashes. */ - dostounix_filename (nm = strcpy (alloca (strlen (nm) + 1), nm)); -#endif #ifdef DOS_NT - /* Now strip drive name. */ + /* We will force directory separators to be either all \ or /, so make + a local copy to modify, even if there ends up being no change. */ + nm = strcpy (alloca (strlen (nm) + 1), nm); + + /* Find and remove drive specifier if present; this makes nm absolute + even if the rest of the name appears to be relative. */ { unsigned char *colon = rindex (nm, ':'); + if (colon) + /* Only recognize colon as part of drive specifier if there is a + single alphabetic character preceeding the colon (and if the + character before the drive letter, if present, is a directory + separator); this is to support the remote system syntax used by + ange-ftp, and the "po:username" syntax for POP mailboxes. */ + look_again: if (nm == colon) nm++; - else + else if (IS_DRIVE (colon[-1]) + && (colon == nm + 1 || IS_DIRECTORY_SEP (colon[-2]))) { drive = colon[-1]; nm = colon + 1; - if (!IS_DIRECTORY_SEP (*nm)) - { - defdir = alloca (MAXPATHLEN + 1); - relpath = getdefdir (tolower (drive) - 'a' + 1, defdir); - } - } + } + else + { + while (--colon >= nm) + if (colon[0] == ':') + goto look_again; + } } #endif /* DOS_NT */ @@ -856,31 +896,43 @@ p = nm; while (*p) { - /* Since we know the path is absolute, we can assume that each - element starts with a "/". */ - - /* "//" anywhere isn't necessarily hairy; we just start afresh - with the second slash. */ + /* Since we are expecting the name to be absolute, we can assume + that each element starts with a "/". */ + if (IS_DIRECTORY_SEP (p[0]) && IS_DIRECTORY_SEP (p[1]) #if defined (APOLLO) || defined (WINDOWSNT) - /* // at start of filename is meaningful on Apollo + /* // at start of filename is meaningful on Apollo and WindowsNT systems */ && nm != p #endif /* APOLLO || WINDOWSNT */ ) nm = p + 1; - /* "~" is hairy as the start of any path element. */ if (IS_DIRECTORY_SEP (p[0]) && p[1] == '~') nm = p + 1; p++; } - /* If nm is absolute, flush ...// and detect /./ and /../. - If no /./ or /../ we can return right away. */ +#ifdef WINDOWSNT + /* Discard any previous drive specifier if nm is now in UNC format. */ + if (IS_DIRECTORY_SEP (nm[0]) && IS_DIRECTORY_SEP (nm[1])) + { + drive = 0; + } +#endif + + /* If nm is absolute, look for /./ or /../ sequences; if none are + found, we can probably return right away. We will avoid allocating + a new string if name is already fully expanded. */ if ( IS_DIRECTORY_SEP (nm[0]) +#ifdef MSDOS + && drive +#endif +#ifdef WINDOWSNT + && (drive || IS_DIRECTORY_SEP (nm[1])) +#endif #ifdef VMS || index (nm, ':') #endif /* VMS */ @@ -897,7 +949,7 @@ p = nm; while (*p) { - /* Since we know the path is absolute, we can assume that each + /* Since we know the name is absolute, we can assume that each element starts with a "/". */ /* "." and ".." are hairy. */ @@ -957,7 +1009,7 @@ nm = brack + 1; brack = 0; } - /* if /pathname/dev:, move nm to dev: */ + /* if /name/dev:, move nm to dev: */ else if (slash) nm = slash + 1; /* if node::dev:, move colon following dev */ @@ -989,7 +1041,28 @@ if (index (nm, '/')) return build_string (sys_translate_unix (nm)); #endif /* VMS */ -#ifndef DOS_NT +#ifdef DOS_NT + /* Make sure directories are all separated with / or \ as + desired, but avoid allocation of a new string when not + required. */ + CORRECT_DIR_SEPS (nm); +#ifdef WINDOWSNT + if (IS_DIRECTORY_SEP (nm[1])) + { + if (strcmp (nm, XSTRING (name)->data) != 0) + name = build_string (nm); + } + else +#endif + /* drive must be set, so this is okay */ + if (strcmp (nm - 2, XSTRING (name)->data) != 0) + { + name = make_string (nm - 2, p - nm + 2); + XSTRING (name)->data[0] = drive; + XSTRING (name)->data[1] = ':'; + } + return name; +#else /* not DOS_NT */ if (nm == XSTRING (name)->data) return name; return build_string (nm); @@ -997,7 +1070,21 @@ } } - /* Now determine directory to start with and put it in newdir */ + /* At this point, nm might or might not be an absolute file name. We + need to expand ~ or ~user if present, otherwise prefix nm with + default_directory if nm is not absolute, and finally collapse /./ + and /foo/../ sequences. + + We set newdir to be the appropriate prefix if one is needed: + - the relevant user directory if nm starts with ~ or ~user + - the specified drive's working dir (DOS/NT only) if nm does not + start with / + - the value of default_directory. + + Note that these prefixes are not guaranteed to be absolute (except + for the working dir of a drive). Therefore, to ensure we always + return an absolute name, if the final prefix is not absolute we + append it to the current working directory. */ newdir = 0; @@ -1011,14 +1098,12 @@ { if (!(newdir = (unsigned char *) egetenv ("HOME"))) newdir = (unsigned char *) ""; + nm++; #ifdef DOS_NT - /* Problem when expanding "~\" if HOME is not on current drive. - Ulrich Leodolter, Wed Jan 11 10:20:35 1995 */ - if (newdir[1] == ':') - drive = newdir[0]; - dostounix_filename (newdir); + if (IS_DIRECTORY_SEP (nm[0])) + /* Make nm look like a relative file name. */ + nm++; #endif - nm++; #ifdef VMS nm++; /* Don't leave the slash in nm. */ #endif /* VMS */ @@ -1034,10 +1119,6 @@ bcopy ((char *) nm, o, p - nm); o [p - nm] = 0; -#ifdef WINDOWSNT - newdir = (unsigned char *) egetenv ("HOME"); - dostounix_filename (newdir); -#else /* not WINDOWSNT */ pw = (struct passwd *) getpwnam (o + 1); if (pw) { @@ -1046,41 +1127,136 @@ nm = p + 1; /* skip the terminator */ #else nm = p; +#ifdef DOS_NT + if (IS_DIRECTORY_SEP (nm[0])) + /* Make nm look like a relative name. */ + nm++; +#endif #endif /* VMS */ } -#endif /* not WINDOWSNT */ /* If we don't find a user of that name, leave the name unchanged; don't move nm forward to p. */ } } - if (!IS_ANY_SEP (nm[0]) +#ifdef DOS_NT + /* On DOS and Windows, nm is absolute if a drive name was specified; + use the drive's current directory as the prefix if needed. */ + if (!newdir && drive) + { + /* Get default directory if needed to make nm absolute. */ + if (!IS_DIRECTORY_SEP (nm[0])) + { + newdir = alloca (MAXPATHLEN + 1); + if (!getdefdir (toupper (drive) - 'A' + 1, newdir)) + newdir = NULL; + } + if (!newdir) + { + /* Either nm starts with /, or drive isn't mounted. */ + newdir = alloca (4); + newdir[0] = drive; + newdir[1] = ':'; + newdir[2] = '/'; + newdir[3] = 0; + } + } +#endif /* DOS_NT */ + + /* Finally, if no prefix has been specified and nm is not absolute, + then it must be expanded relative to default_directory. */ + + if ( +#ifndef DOS_NT + /* /... alone is not absolute on DOS and Windows. */ + !IS_DIRECTORY_SEP (nm[0]) +#endif +#ifdef WINDOWSNT + !(IS_DIRECTORY_SEP (nm[0]) && IS_DIRECTORY_SEP (nm[1])) +#endif #ifdef VMS && !index (nm, ':') -#endif /* not VMS */ -#ifdef DOS_NT - && drive == -1 -#endif /* DOS_NT */ +#endif && !newdir) { newdir = XSTRING (default_directory)->data; } #ifdef DOS_NT - if (newdir == 0 && relpath) - newdir = defdir; + if (newdir) + { + /* First ensure newdir is an absolute name. */ + if ( + /* Detect MSDOS file names with drive specifiers. */ + ! (IS_DRIVE (newdir[0]) + && IS_DEVICE_SEP (newdir[1]) && IS_DIRECTORY_SEP (newdir[2])) +#ifdef WINDOWSNT + /* Detect Windows file names in UNC format. */ + && ! (IS_DIRECTORY_SEP (newdir[0]) && IS_DIRECTORY_SEP (newdir[1])) +#endif + ) + { + /* Effectively, let newdir be (expand-file-name newdir cwd). + Because of the admonition against calling expand-file-name + when we have pointers into lisp strings, we accomplish this + indirectly by prepending newdir to nm if necessary, and using + cwd (or the wd of newdir's drive) as the new newdir. */ + + if (IS_DRIVE (newdir[0]) && newdir[1] == ':') + { + drive = newdir[0]; + newdir += 2; + } + if (!IS_DIRECTORY_SEP (nm[0])) + { + char * tmp = alloca (strlen (newdir) + strlen (nm) + 2); + file_name_as_directory (tmp, newdir); + strcat (tmp, nm); + nm = tmp; + } + newdir = alloca (MAXPATHLEN + 1); + if (drive) + { + if (!getdefdir (toupper (drive) - 'A' + 1, newdir)) + newdir = "/"; + } + else + getwd (newdir); + } + + /* Strip off drive name from prefix, if present. */ + if (IS_DRIVE (newdir[0]) && newdir[1] == ':') + { + drive = newdir[0]; + newdir += 2; + } + + /* Keep only a prefix from newdir if nm starts with slash + (//server/share for UNC, nothing otherwise). */ + if (IS_DIRECTORY_SEP (nm[0])) + { +#ifdef WINDOWSNT + if (IS_DIRECTORY_SEP (newdir[0]) && IS_DIRECTORY_SEP (newdir[1])) + { + newdir = strcpy (alloca (strlen (newdir) + 1), newdir); + p = newdir + 2; + while (*p && !IS_DIRECTORY_SEP (*p)) p++; + p++; + while (*p && !IS_DIRECTORY_SEP (*p)) p++; + *p = 0; + } + else +#endif + newdir = ""; + } + } #endif /* DOS_NT */ - if (newdir != 0) + + if (newdir) { /* Get rid of any slash at the end of newdir. */ - int length = strlen (newdir); - /* Adding `length > 1 &&' makes ~ expand into / when homedir - is the root dir. People disagree about whether that is right. - Anyway, we can't take the risk of this change now. */ -#ifdef DOS_NT - if (newdir[1] != ':' && length > 1) -#endif + length = strlen (newdir); if (IS_DIRECTORY_SEP (newdir[length - 1])) { unsigned char *temp = (unsigned char *) alloca (length); @@ -1096,7 +1272,7 @@ /* Now concatenate the directory and name to new space in the stack frame */ tlen += strlen (nm) + 1; #ifdef DOS_NT - /* Add reserved space for drive name. (The Microsoft x86 compiler + /* Add reserved space for drive name. (The Microsoft x86 compiler produces incorrect code if the following two lines are combined.) */ target = (unsigned char *) alloca (tlen + 2); target += 2; @@ -1121,6 +1297,8 @@ strcpy (target, sys_translate_unix (target)); #endif /* VMS */ + /* ASSERT (IS_DIRECTORY_SEP (target[0])) if not VMS */ + /* Now canonicalize by removing /. and /foo/.. if they appear. */ p = target; @@ -1176,10 +1354,10 @@ } else if (IS_DIRECTORY_SEP (p[0]) && IS_DIRECTORY_SEP (p[1]) #if defined (APOLLO) || defined (WINDOWSNT) - /* // at start of filename is meaningful in Apollo + /* // at start of filename is meaningful in Apollo and WindowsNT systems */ && o != target -#endif /* APOLLO */ +#endif /* APOLLO || WINDOWSNT */ ) { o = target; @@ -1203,14 +1381,6 @@ { while (o != target && (--o) && !IS_DIRECTORY_SEP (*o)) ; -#if defined (APOLLO) || defined (WINDOWSNT) - if (o == target + 1 - && IS_DIRECTORY_SEP (o[-1]) && IS_DIRECTORY_SEP (o[0])) - ++o; - else -#endif /* APOLLO || WINDOWSNT */ - if (o == target && IS_ANY_SEP (*o)) - ++o; p += 3; } else @@ -1221,18 +1391,18 @@ } #ifdef DOS_NT - /* at last, set drive name. */ - if (target[1] != ':' + /* At last, set drive name. */ #ifdef WINDOWSNT - /* Allow network paths that look like "\\foo" */ - && !(IS_DIRECTORY_SEP (target[0]) && IS_DIRECTORY_SEP (target[1])) + /* Except for network file name. */ + if (!(IS_DIRECTORY_SEP (target[0]) && IS_DIRECTORY_SEP (target[1]))) #endif /* WINDOWSNT */ - ) { + if (!drive) abort (); target -= 2; - target[0] = (drive < 0 ? getdisk () + 'A' : drive); + target[0] = drive; target[1] = ':'; } + CORRECT_DIR_SEPS (target); #endif /* DOS_NT */ return make_string (target, o - target); @@ -1252,7 +1422,7 @@ Lisp_Object name, defalt; { unsigned char *nm; - + register unsigned char *newdir, *p, *o; int tlen; unsigned char *target; @@ -1266,7 +1436,7 @@ int lbrack = 0, rbrack = 0; int dots = 0; #endif /* VMS */ - + CHECK_STRING (name, 0); #ifdef VMS @@ -1275,7 +1445,7 @@ #endif nm = XSTRING (name)->data; - + /* If nm is absolute, flush ...// and detect /./ and /../. If no /./ or /../ we can return right away. */ if ( @@ -1351,13 +1521,13 @@ nm = brack + 1; brack = 0; } - /* if /pathname/dev:, move nm to dev: */ + /* If /name/dev:, move nm to dev: */ else if (slash) nm = slash + 1; - /* if node::dev:, move colon following dev */ + /* If node::dev:, move colon following dev */ else if (colon && colon[-1] == ':') colon = p; - /* if dev1:dev2:, move nm to dev2: */ + /* If dev1:dev2:, move nm to dev2: */ else if (colon && colon[-1] != ':') { nm = colon + 1; @@ -1593,9 +1763,10 @@ return call2 (handler, Qsubstitute_in_file_name, filename); nm = XSTRING (filename)->data; -#ifdef MSDOS - dostounix_filename (nm = strcpy (alloca (strlen (nm) + 1), nm)); - substituted = !strcmp (nm, XSTRING (filename)->data); +#ifdef DOS_NT + nm = strcpy (alloca (strlen (nm) + 1), nm); + CORRECT_DIR_SEPS (nm); + substituted = (strcmp (nm, XSTRING (filename)->data) != 0); #endif endp = nm + XSTRING (filename)->size; @@ -1603,17 +1774,14 @@ for (p = nm; p != endp; p++) { - if ((p[0] == '~' || -#ifdef APOLLO - /* // at start of file name is meaningful in Apollo system */ - (p[0] == '/' && p - 1 != nm) -#else /* not APOLLO */ -#ifdef WINDOWSNT - (IS_DIRECTORY_SEP (p[0]) && p - 1 != nm) -#else /* not WINDOWSNT */ - p[0] == '/' -#endif /* not WINDOWSNT */ -#endif /* not APOLLO */ + if ((p[0] == '~' +#if defined (APOLLO) || defined (WINDOWSNT) + /* // at start of file name is meaningful in Apollo and + WindowsNT systems */ + || (IS_DIRECTORY_SEP (p[0]) && p - 1 != nm) +#else /* not (APOLLO || WINDOWSNT) */ + || IS_DIRECTORY_SEP (p[0]) +#endif /* not (APOLLO || WINDOWSNT) */ ) && p != nm && (0 @@ -1626,7 +1794,9 @@ substituted = 1; } #ifdef DOS_NT - if (p[0] && p[1] == ':') + /* see comment in expand-file-name about drive specifiers */ + else if (IS_DRIVE (p[0]) && p[1] == ':' + && p > nm && IS_DIRECTORY_SEP (p[-1])) { nm = p; substituted = 1; @@ -1745,22 +1915,18 @@ for (p = xnm; p != x; p++) if ((p[0] == '~' -#ifdef APOLLO - /* // at start of file name is meaningful in Apollo system */ - || (p[0] == '/' && p - 1 != xnm) -#else /* not APOLLO */ -#ifdef WINDOWSNT +#if defined (APOLLO) || defined (WINDOWSNT) || (IS_DIRECTORY_SEP (p[0]) && p - 1 != xnm) -#else /* not WINDOWSNT */ - || p[0] == '/' -#endif /* not WINDOWSNT */ -#endif /* not APOLLO */ +#else /* not (APOLLO || WINDOWSNT) */ + || IS_DIRECTORY_SEP (p[0]) +#endif /* not (APOLLO || WINDOWSNT) */ ) && p != nm && IS_DIRECTORY_SEP (p[-1])) xnm = p; #ifdef DOS_NT - else if (p[0] && p[1] == ':') - xnm = p; + else if (IS_DRIVE (p[0]) && p[1] == ':' + && p > nm && IS_DIRECTORY_SEP (p[-1])) + xnm = p; #endif return make_string (xnm, x - xnm); @@ -1783,25 +1949,25 @@ expand_and_dir_to_file (filename, defdir) Lisp_Object filename, defdir; { - register Lisp_Object abspath; - - abspath = Fexpand_file_name (filename, defdir); + register Lisp_Object absname; + + absname = Fexpand_file_name (filename, defdir); #ifdef VMS { - register int c = XSTRING (abspath)->data[XSTRING (abspath)->size - 1]; + register int c = XSTRING (absname)->data[XSTRING (absname)->size - 1]; if (c == ':' || c == ']' || c == '>') - abspath = Fdirectory_file_name (abspath); + absname = Fdirectory_file_name (absname); } #else - /* Remove final slash, if any (unless path is root). + /* Remove final slash, if any (unless this is the root dir). stat behaves differently depending! */ - if (XSTRING (abspath)->size > 1 - && IS_DIRECTORY_SEP (XSTRING (abspath)->data[XSTRING (abspath)->size - 1]) - && !IS_DEVICE_SEP (XSTRING (abspath)->data[XSTRING (abspath)->size-2])) + if (XSTRING (absname)->size > 1 + && IS_DIRECTORY_SEP (XSTRING (absname)->data[XSTRING (absname)->size - 1]) + && !IS_DEVICE_SEP (XSTRING (absname)->data[XSTRING (absname)->size-2])) /* We cannot take shortcuts; they might be wrong for magic file names. */ - abspath = Fdirectory_file_name (abspath); + absname = Fdirectory_file_name (absname); #endif - return abspath; + return absname; } /* Signal an error if the file ABSNAME already exists. @@ -1904,7 +2070,7 @@ copyable by us. */ input_file_statable_p = (fstat (ifd, &st) >= 0); -#ifndef DOS_NT +#ifndef MSDOS if (out_st.st_mode != 0 && st.st_dev == out_st.st_dev && st.st_ino == out_st.st_ino) { @@ -2308,10 +2474,10 @@ Lisp_Object path, login; { int netresult; - + CHECK_STRING (path, 0); - CHECK_STRING (login, 0); - + CHECK_STRING (login, 0); + netresult = netunam (XSTRING (path)->data, XSTRING (login)->data); if (netresult == -1) @@ -2323,7 +2489,7 @@ DEFUN ("file-name-absolute-p", Ffile_name_absolute_p, Sfile_name_absolute_p, 1, 1, 0, - "Return t if file FILENAME specifies an absolute path name.\n\ + "Return t if file FILENAME specifies an absolute file name.\n\ On Unix, this is a name starting with a `/' or a `~'.") (filename) Lisp_Object filename; @@ -2340,7 +2506,7 @@ && ptr[1] != '.') #endif /* VMS */ #ifdef DOS_NT - || (*ptr != 0 && ptr[1] == ':' && (ptr[2] == '/' || ptr[2] == '\\')) + || (IS_DRIVE (*ptr) && ptr[1] == ':' && IS_DIRECTORY_SEP (ptr[2])) #endif ) return Qt; @@ -2360,12 +2526,16 @@ struct stat st; if (stat (filename, &st) < 0) return 0; +#ifdef WINDOWSNT + return ((st.st_mode & S_IEXEC) != 0); +#else return (S_ISREG (st.st_mode) && len >= 5 && (stricmp ((suffix = filename + len-4), ".com") == 0 || stricmp (suffix, ".exe") == 0 || stricmp (suffix, ".bat") == 0) || (st.st_mode & S_IFMT) == S_IFDIR); +#endif /* not WINDOWSNT */ #else /* not DOS_NT */ #ifdef HAVE_EACCESS return (eaccess (filename, 1) >= 0); @@ -2409,20 +2579,20 @@ (filename) Lisp_Object filename; { - Lisp_Object abspath; + Lisp_Object absname; Lisp_Object handler; struct stat statbuf; CHECK_STRING (filename, 0); - abspath = Fexpand_file_name (filename, Qnil); + absname = Fexpand_file_name (filename, Qnil); /* If the file name has special constructs in it, call the corresponding file handler. */ - handler = Ffind_file_name_handler (abspath, Qfile_exists_p); + handler = Ffind_file_name_handler (absname, Qfile_exists_p); if (!NILP (handler)) - return call2 (handler, Qfile_exists_p, abspath); - - return (stat (XSTRING (abspath)->data, &statbuf) >= 0) ? Qt : Qnil; + return call2 (handler, Qfile_exists_p, absname); + + return (stat (XSTRING (absname)->data, &statbuf) >= 0) ? Qt : Qnil; } DEFUN ("file-executable-p", Ffile_executable_p, Sfile_executable_p, 1, 1, 0, @@ -2432,19 +2602,19 @@ Lisp_Object filename; { - Lisp_Object abspath; + Lisp_Object absname; Lisp_Object handler; CHECK_STRING (filename, 0); - abspath = Fexpand_file_name (filename, Qnil); + absname = Fexpand_file_name (filename, Qnil); /* If the file name has special constructs in it, call the corresponding file handler. */ - handler = Ffind_file_name_handler (abspath, Qfile_executable_p); + handler = Ffind_file_name_handler (absname, Qfile_executable_p); if (!NILP (handler)) - return call2 (handler, Qfile_executable_p, abspath); - - return (check_executable (XSTRING (abspath)->data) ? Qt : Qnil); + return call2 (handler, Qfile_executable_p, absname); + + return (check_executable (XSTRING (absname)->data) ? Qt : Qnil); } DEFUN ("file-readable-p", Ffile_readable_p, Sfile_readable_p, 1, 1, 0, @@ -2453,32 +2623,31 @@ (filename) Lisp_Object filename; { - Lisp_Object abspath; + Lisp_Object absname; Lisp_Object handler; int desc; CHECK_STRING (filename, 0); - abspath = Fexpand_file_name (filename, Qnil); + absname = Fexpand_file_name (filename, Qnil); /* If the file name has special constructs in it, call the corresponding file handler. */ - handler = Ffind_file_name_handler (abspath, Qfile_readable_p); + handler = Ffind_file_name_handler (absname, Qfile_readable_p); if (!NILP (handler)) - return call2 (handler, Qfile_readable_p, abspath); - -#ifdef MSDOS - /* Under MS-DOS, open does not work't right, because it doesn't work for - directories (MS-DOS won't let you open a directory). */ - if (access (XSTRING (abspath)->data, 0) == 0) + return call2 (handler, Qfile_readable_p, absname); + +#ifdef DOS_NT + /* Under MS-DOS and Windows, open does not work for directories. */ + if (access (XSTRING (absname)->data, 0) == 0) return Qt; return Qnil; -#else /* not MSDOS */ - desc = open (XSTRING (abspath)->data, O_RDONLY); +#else /* not DOS_NT */ + desc = open (XSTRING (absname)->data, O_RDONLY); if (desc < 0) return Qnil; close (desc); return Qt; -#endif /* not MSDOS */ +#endif /* not DOS_NT */ } /* Having this before file-symlink-p mysteriously caused it to be forgotten @@ -2488,23 +2657,23 @@ (filename) Lisp_Object filename; { - Lisp_Object abspath, dir; + Lisp_Object absname, dir; Lisp_Object handler; struct stat statbuf; CHECK_STRING (filename, 0); - abspath = Fexpand_file_name (filename, Qnil); + absname = Fexpand_file_name (filename, Qnil); /* If the file name has special constructs in it, call the corresponding file handler. */ - handler = Ffind_file_name_handler (abspath, Qfile_writable_p); + handler = Ffind_file_name_handler (absname, Qfile_writable_p); if (!NILP (handler)) - return call2 (handler, Qfile_writable_p, abspath); - - if (stat (XSTRING (abspath)->data, &statbuf) >= 0) - return (check_writable (XSTRING (abspath)->data) + return call2 (handler, Qfile_writable_p, absname); + + if (stat (XSTRING (absname)->data, &statbuf) >= 0) + return (check_writable (XSTRING (absname)->data) ? Qt : Qnil); - dir = Ffile_name_directory (abspath); + dir = Ffile_name_directory (absname); #ifdef VMS if (!NILP (dir)) dir = Fdirectory_file_name (dir); @@ -2571,19 +2740,19 @@ (filename) Lisp_Object filename; { - register Lisp_Object abspath; + register Lisp_Object absname; struct stat st; Lisp_Object handler; - abspath = expand_and_dir_to_file (filename, current_buffer->directory); + absname = expand_and_dir_to_file (filename, current_buffer->directory); /* If the file name has special constructs in it, call the corresponding file handler. */ - handler = Ffind_file_name_handler (abspath, Qfile_directory_p); + handler = Ffind_file_name_handler (absname, Qfile_directory_p); if (!NILP (handler)) - return call2 (handler, Qfile_directory_p, abspath); - - if (stat (XSTRING (abspath)->data, &st) < 0) + return call2 (handler, Qfile_directory_p, absname); + + if (stat (XSTRING (absname)->data, &st) < 0) return Qnil; return (st.st_mode & S_IFMT) == S_IFDIR ? Qt : Qnil; } @@ -2627,19 +2796,19 @@ (filename) Lisp_Object filename; { - register Lisp_Object abspath; + register Lisp_Object absname; struct stat st; Lisp_Object handler; - abspath = expand_and_dir_to_file (filename, current_buffer->directory); + absname = expand_and_dir_to_file (filename, current_buffer->directory); /* If the file name has special constructs in it, call the corresponding file handler. */ - handler = Ffind_file_name_handler (abspath, Qfile_regular_p); + handler = Ffind_file_name_handler (absname, Qfile_regular_p); if (!NILP (handler)) - return call2 (handler, Qfile_regular_p, abspath); - - if (stat (XSTRING (abspath)->data, &st) < 0) + return call2 (handler, Qfile_regular_p, absname); + + if (stat (XSTRING (absname)->data, &st) < 0) return Qnil; return (st.st_mode & S_IFMT) == S_IFREG ? Qt : Qnil; } @@ -2649,24 +2818,24 @@ (filename) Lisp_Object filename; { - Lisp_Object abspath; + Lisp_Object absname; struct stat st; Lisp_Object handler; - abspath = expand_and_dir_to_file (filename, current_buffer->directory); + absname = expand_and_dir_to_file (filename, current_buffer->directory); /* If the file name has special constructs in it, call the corresponding file handler. */ - handler = Ffind_file_name_handler (abspath, Qfile_modes); + handler = Ffind_file_name_handler (absname, Qfile_modes); if (!NILP (handler)) - return call2 (handler, Qfile_modes, abspath); - - if (stat (XSTRING (abspath)->data, &st) < 0) + return call2 (handler, Qfile_modes, absname); + + if (stat (XSTRING (absname)->data, &st) < 0) return Qnil; -#ifdef DOS_NT - if (check_executable (XSTRING (abspath)->data)) +#ifdef MSDOS + if (check_executable (XSTRING (absname)->data)) st.st_mode |= S_IEXEC; -#endif /* DOS_NT */ +#endif /* MSDOS */ return make_number (st.st_mode & 07777); } @@ -2677,20 +2846,20 @@ (filename, mode) Lisp_Object filename, mode; { - Lisp_Object abspath; + Lisp_Object absname; Lisp_Object handler; - abspath = Fexpand_file_name (filename, current_buffer->directory); + absname = Fexpand_file_name (filename, current_buffer->directory); CHECK_NUMBER (mode, 1); /* If the file name has special constructs in it, call the corresponding file handler. */ - handler = Ffind_file_name_handler (abspath, Qset_file_modes); + handler = Ffind_file_name_handler (absname, Qset_file_modes); if (!NILP (handler)) - return call3 (handler, Qset_file_modes, abspath, mode); - - if (chmod (XSTRING (abspath)->data, XINT (mode)) < 0) - report_file_error ("Doing chmod", Fcons (abspath, Qnil)); + return call3 (handler, Qset_file_modes, absname, mode); + + if (chmod (XSTRING (absname)->data, XINT (mode)) < 0) + report_file_error ("Doing chmod", Fcons (absname, Qnil)); return Qnil; } @@ -2703,7 +2872,7 @@ Lisp_Object mode; { CHECK_NUMBER (mode, 0); - + umask ((~ XINT (mode)) & 0777); return Qnil; @@ -2743,7 +2912,7 @@ (file1, file2) Lisp_Object file1, file2; { - Lisp_Object abspath1, abspath2; + Lisp_Object absname1, absname2; struct stat st; int mtime1; Lisp_Object handler; @@ -2752,26 +2921,26 @@ CHECK_STRING (file1, 0); CHECK_STRING (file2, 0); - abspath1 = Qnil; - GCPRO2 (abspath1, file2); - abspath1 = expand_and_dir_to_file (file1, current_buffer->directory); - abspath2 = expand_and_dir_to_file (file2, current_buffer->directory); + absname1 = Qnil; + GCPRO2 (absname1, file2); + absname1 = expand_and_dir_to_file (file1, current_buffer->directory); + absname2 = expand_and_dir_to_file (file2, current_buffer->directory); UNGCPRO; /* If the file name has special constructs in it, call the corresponding file handler. */ - handler = Ffind_file_name_handler (abspath1, Qfile_newer_than_file_p); + handler = Ffind_file_name_handler (absname1, Qfile_newer_than_file_p); if (NILP (handler)) - handler = Ffind_file_name_handler (abspath2, Qfile_newer_than_file_p); + handler = Ffind_file_name_handler (absname2, Qfile_newer_than_file_p); if (!NILP (handler)) - return call3 (handler, Qfile_newer_than_file_p, abspath1, abspath2); - - if (stat (XSTRING (abspath1)->data, &st) < 0) + return call3 (handler, Qfile_newer_than_file_p, absname1, absname2); + + if (stat (XSTRING (absname1)->data, &st) < 0) return Qnil; mtime1 = st.st_mtime; - if (stat (XSTRING (abspath2)->data, &st) < 0) + if (stat (XSTRING (absname2)->data, &st) < 0) return Qt; return (mtime1 > st.st_mtime) ? Qt : Qnil; @@ -3148,7 +3317,7 @@ /* Decode file format */ if (inserted > 0) { - insval = call3 (Qformat_decode, + insval = call3 (Qformat_decode, Qnil, make_number (inserted), visit); CHECK_NUMBER (insval, 0); inserted = XFASTINT (insval); @@ -3156,7 +3325,7 @@ if (inserted > 0 && NILP (visit) && total > 0) signal_after_change (point, 0, inserted); - + if (inserted > 0) { p = Vafter_insert_file_functions; @@ -3186,7 +3355,7 @@ /* If build_annotations switched buffers, switch back to BUF. Kill the temporary buffer that was selected in the meantime. */ -static Lisp_Object +static Lisp_Object build_annotations_unwind (buf) Lisp_Object buf; { @@ -3273,7 +3442,7 @@ handler = Ffind_file_name_handler (filename, Qwrite_region); /* If FILENAME has no handler, see if VISIT has one. */ if (NILP (handler) && STRINGP (visit)) - handler = Ffind_file_name_handler (visit, Qwrite_region); + handler = Ffind_file_name_handler (visit, Qwrite_region); if (!NILP (handler)) { @@ -3371,8 +3540,8 @@ } #else /* not VMS */ #ifdef DOS_NT - desc = open (fn, - O_WRONLY | O_TRUNC | O_CREAT | buffer_file_type, + desc = open (fn, + O_WRONLY | O_TRUNC | O_CREAT | buffer_file_type, S_IREAD | S_IWRITE); #else /* not DOS_NT */ desc = creat (fn, auto_saving ? auto_save_mode_bits : 0666); @@ -3476,7 +3645,7 @@ } #endif - /* Spurious "file has changed on disk" warnings have been + /* Spurious "file has changed on disk" warnings have been observed on Suns as well. It seems that `close' can change the modtime, under nfs. @@ -3882,7 +4051,7 @@ Lisp_Object listfile; listfile = Fexpand_file_name (Vauto_save_list_file_name, Qnil); #ifdef DOS_NT - listdesc = open (XSTRING (listfile)->data, + listdesc = open (XSTRING (listfile)->data, O_WRONLY | O_TRUNC | O_CREAT | O_TEXT, S_IREAD | S_IWRITE); #else /* not DOS_NT */ @@ -3891,7 +4060,7 @@ } else listdesc = -1; - + /* Arrange to close that file whether or not we get an error. Also reset auto_saving to 0. */ record_unwind_protect (do_auto_save_unwind, make_number (listdesc)); @@ -3908,7 +4077,7 @@ { buf = XCONS (XCONS (tail)->car)->cdr; b = XBUFFER (buf); - + /* Record all the buffers that have auto save mode in the special file that lists them. For each of these buffers, Record visited name (if any) and auto save name. */ @@ -4179,6 +4348,10 @@ /* If dir starts with user's homedir, change that to ~. */ homedir = (char *) egetenv ("HOME"); +#ifdef DOS_NT + homedir = strcpy (alloca (strlen (homedir) + 1), homedir); + CORRECT_DIR_SEPS (homedir); +#endif if (homedir != 0 && STRINGP (dir) && !strncmp (homedir, XSTRING (dir)->data, strlen (homedir)) @@ -4372,7 +4545,7 @@ Qfile_error = intern ("file-error"); staticpro (&Qfile_error); - Qfile_already_exists = intern("file-already-exists"); + Qfile_already_exists = intern ("file-already-exists"); staticpro (&Qfile_already_exists); #ifdef DOS_NT @@ -4415,6 +4588,14 @@ nil means use format `var'. This variable is meaningful only on VMS."); vms_stmlf_recfm = 0; + DEFVAR_LISP ("directory-sep-char", &Vdirectory_sep_char, + "Directory separator character for built-in functions that return file names.\n\ +The value should be either ?/ or ?\\ (any other value is treated as ?\\).\n\ +This variable affects the built-in functions only on Windows,\n\ +on other platforms, it is initialized so that Lisp code can find out\n\ +what the normal separator is."); + Vdirectory_sep_char = '/'; + DEFVAR_LISP ("file-name-handler-alist", &Vfile_name_handler_alist, "*Alist of elements (REGEXP . HANDLER) for file names handled specially.\n\ If a file name matches REGEXP, then all I/O on that file is done by calling\n\