diff src/m/hp9000s300.h @ 456:c0335c02f1d7

Initial revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/src/m/hp9000s300.h	Fri Dec 13 18:49:49 1991 +0000
@@ -0,0 +1,224 @@
+/* machine description file for hp9000 series 200 or 300 on either HPUX or BSD.
+   Copyright (C) 1985 Free Software Foundation, Inc.
+
+This file is part of GNU Emacs.
+
+GNU Emacs is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 1, or (at your option)
+any later version.
+
+GNU Emacs is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Emacs; see the file COPYING.  If not, write to
+the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+
+/* The following line tells the configuration script what sort of 
+   operating system this machine is likely to run.
+   USUAL-OPSYS="note"
+
+NOTE-START
+HP 9000 series 200 or 300 (-machine=hp9000s300)
+
+  These machines are 68000-series CPUs running HP-UX
+  (a derivative of sysV with some BSD features) or BSD 4.3 ported by Utah.
+
+  If you're running HP-UX, specify `-opsystem=hpux'.
+
+  If you're running Utah's BSD port, don't use this -machine option;
+  instead, specify `-machine=hp300bsd' and `-opsystem=bsd4-3'.
+NOTE-END */
+
+/* Define this symbol if you are running a version of HP-UX
+   which predates version 6.5 */
+
+/* #define NOMULTIPLEJOBS */
+
+/* Define this symbol if you are running a version of HP-UX
+   which predates version 6.01 */
+
+/* #define HPUX_5 */
+
+/* The following three symbols give information on
+ the size of various data types.  */
+
+#define SHORTBITS 16		/* Number of bits in a short */
+
+#define INTBITS 32		/* Number of bits in an int */
+
+#define LONGBITS 32		/* Number of bits in a long */
+
+/* Define BIG_ENDIAN iff lowest-numbered byte in a word
+   is the most significant byte.  */
+
+#define BIG_ENDIAN
+
+/* Define NO_ARG_ARRAY if you cannot take the address of the first of a
+ * group of arguments and treat it as an array of the arguments.  */
+
+/* #define NO_ARG_ARRAY */
+
+/* Define WORD_MACHINE if addresses and such have
+ * to be corrected before they can be used as byte counts.  */
+
+/* #define WORD_MACHINE */
+
+/* Define how to take a char and sign-extend into an int.
+   On machines where char is signed, this is a no-op.  */
+
+#define SIGN_EXTEND_CHAR(c) (c)
+
+/* Now define a symbol for the cpu type, if your compiler
+   does not define it automatically.  */
+
+#ifndef hp9000s300
+#define hp9000s300
+#endif
+
+/* Use type int rather than a union, to represent Lisp_Object */
+/* This is desirable for most machines.  */
+
+#define NO_UNION_TYPE
+
+/* Define EXPLICIT_SIGN_EXTEND if XINT must explicitly sign-extend
+   the 24-bit bit field into an int.  In other words, if bit fields
+   are always unsigned.
+
+   If you use NO_UNION_TYPE, this flag does not matter.  */
+
+#define EXPLICIT_SIGN_EXTEND
+
+/* Define CANNOT_DUMP on machines where unexec does not work.
+   Then the function dump-emacs will not be defined
+   and temacs will do (load "loadup") automatically unless told otherwise.  */
+
+/* #define CANNOT_DUMP */
+
+/* Define VIRT_ADDR_VARIES if the virtual addresses of
+   pure and impure space as loaded can vary, and even their
+   relative order cannot be relied on.
+
+   Otherwise Emacs assumes that text space precedes data space,
+   numerically.  */
+
+/* #define VIRT_ADDR_VARIES */
+
+/* For University of Utah 4.3bsd implemetation on HP300s.
+   The #ifndef __GNUC__ definitions are required for the "standard" cc,
+   a very old, brain-dead version of PCC. */
+
+#ifdef BSD4_3
+/* Tell crt0.c that this is an ordinary 68020.  */
+#undef hp9000s300
+#define CRT0_DUMMIES		bogus_a6,
+
+#define HAVE_ALLOCA
+
+#ifndef __GNUC__
+#define LIBS_DEBUG		/* don't have -lg that works */
+#define C_DEBUG_SWITCH		/* don't support -g */
+#endif
+
+#undef LOAD_AVE_TYPE
+#undef LOAD_AVE_CVT
+#define LOAD_AVE_TYPE long
+#define LOAD_AVE_CVT(x) ((int) (((double) (x)) / 2048.0 * 100.0))
+
+#endif /* BSD4_3 */
+
+#ifndef BSD4_3
+/* The following definitions are for HPUX only.  */
+
+/* The symbol in the kernel where the load average is found
+   is named _avenrun on this machine.  */
+
+#define LDAV_SYMBOL "_avenrun"
+
+/* Data type of load average, as read out of kmem.  */
+
+#define LOAD_AVE_TYPE double
+
+/* Convert that into an integer that is 100 for a load average of 1.0  */
+
+#define LOAD_AVE_CVT(x) ((int) ((x) * 100.0))
+
+/* This library is needed with -g, on the 200/300 only.  */
+
+#if !defined(__GNUC__) || defined(__HPUX_ASM__)
+#define LIBS_DEBUG /usr/lib/end.o
+#endif
+
+/* The symbol FIONREAD is defined, but the feature does not work
+   on the 200/300.  */
+
+#define BROKEN_FIONREAD
+
+/* In older versions of hpux, for unknown reasons, S_IFLNK is defined
+   even though symbolic links do not exist.
+   Make sure our conditionals based on S_IFLNK are not confused.
+
+   Here we assume that stat.h is included before config.h
+   so that we can override it here.
+
+   Version 6 of HP-UX has symbolic links.  */
+
+#ifdef HPUX_5
+#undef S_IFLNK
+#endif
+
+/* Define the BSTRING functions in terms of the sysV functions.
+   Version 6 of HP-UX supplies these in the BSD library. */
+
+#ifdef HPUX_5
+#define bcopy(a,b,s)	memcpy (b,a,s)
+#define bzero(a,s)	memset (a,0,s)
+#define bcmp		memcmp
+#endif
+
+/* On USG systems these have different names.
+   Version 6 of HP-UX supplies these in the BSD library. */
+
+#ifdef HPUX_5
+#define index strchr
+#define rindex strrchr
+#endif
+
+/* Define C_SWITCH_MACHINE to be +X if you want the s200/300
+ * Emacs to run on both 68010 and 68020 based hp-ux's.
+ *
+ * Define OLD_HP_ASSEMBLER if you have an ancient assembler
+ *
+ * Define HPUX_68010 if you are using the new assembler but
+ * compiling for a s200 (upgraded) or s310.  68010 based
+ * processor without 68881.
+ */
+
+/* These switches increase the size of some internal C compiler tables.
+   They are required for compiling the X11 interface files. */
+
+#ifndef HPUX_5
+#ifndef __GNUC__
+#define C_SWITCH_MACHINE -Wc,-Nd4000,-Ns3000
+#endif
+#endif
+
+#endif /* not BSD4_3 */
+
+/* Define NEED_BSDTTY if you have such. */
+
+#ifndef NOMULTIPLEJOBS
+#define NEED_BSDTTY
+#endif
+
+#ifndef NOT_C_CODE
+#ifndef NO_SHORTNAMES
+#include <sys/wait.h>
+#define WAITTYPE int
+#endif
+#define WRETCODE(w) (((w) >> 8) & 0377)
+#endif