diff lisp/Makefile.in @ 29657:cdef08609770

*** empty log message ***

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/lisp/Makefile.in	Wed Jun 14 20:26:14 2000 +0000
@@ -0,0 +1,183 @@
+#
+# Maintenance productions for the Lisp directory
+#
+
+lisp=@srcdir@
+VPATH=@srcdir@
+
+# You can specify a different executable on the make command line,
+# e.g. "make EMACS=../src/emacs ...".
+
+EMACS = ../src/emacs
+
+# Command line flags for Emacs.  This must include --multibyte,
+# otherwise some files will not compile.
+
+EMACSOPT = -batch --no-site-file --multibyte
+
+SOURCES = *.el COPYING Makefile
+lisptagsfiles1 = $(lisp)/[a-zA-Z]*.el
+lisptagsfiles2 = $(lisp)/[a-zA-Z]*/[a-zA-Z]*.el
+ETAGS = ../lib-src/etags
+
+# Files which should not be compiled.
+# - emacs-lisp/cl-specs.el:  only contains `def-edebug-spec's so there's
+#   no point compiling it, although it doesn't hurt.
+
+DONTCOMPILE = \
+	$(lisp)/bindings.el \
+	$(lisp)/cus-load.el \
+	$(lisp)/cus-start.el \
+	$(lisp)/emacs-lisp/cl-specs.el \
+	$(lisp)/finder-inf.el \
+	$(lisp)/forms-d2.el \
+	$(lisp)/forms-pass.el \
+	$(lisp)/generic-x.el \
+	$(lisp)/international/latin-1.el \
+	$(lisp)/international/latin-2.el \
+	$(lisp)/international/latin-3.el \
+	$(lisp)/international/latin-4.el \
+	$(lisp)/international/latin-5.el \
+	$(lisp)/international/latin-8.el \
+	$(lisp)/international/latin-9.el \
+	$(lisp)/international/mule-conf.el \
+	$(lisp)/loaddefs.el \
+	$(lisp)/loadup.el \
+	$(lisp)/mail/blessmail.el \
+	$(lisp)/mail/sc.el \
+	$(lisp)/patcomp.el \
+	$(lisp)/paths.el \
+	$(lisp)/play/bruce.el \
+	$(lisp)/subdirs.el \
+	$(lisp)/term/internal.el \
+	$(lisp)/version.el
+
+# Files to compile before others during a bootstrap.  This is done
+# to speed up the bootstrap process.
+
+COMPILE_FIRST = \
+	$(lisp)/emacs-lisp/byte-opt.el \
+	$(lisp)/emacs-lisp/bytecomp.el \
+	$(lisp)/subr.el
+
+# The actual Emacs command run in the targets below.
+
+emacs = $(EMACS) $(EMACSOPT)
+
+# Common command to find subdirectories
+
+setwins=subdirs=`find $$wd -type d -print`; \
+	for file in $$subdirs; do \
+	   case $$file in */Old | */RCS | */CVS | */CVS/* | */=* ) ;; \
+		*) wins="$$wins $$file" ;; \
+	   esac; \
+        done
+
+doit:
+
+cus-load.el:
+	touch $@
+custom-deps: cus-load.el doit
+	wd=$(lisp); $(setwins); \
+	echo Directories: $$wins; \
+	$(emacs) -l cus-dep -f custom-make-dependencies $$wins
+
+finder-inf.el:
+	echo "(provide 'finder-inf)" >> $@
+finder-data: finder-inf.el doit
+	wd=$(lisp); $(setwins); \
+	echo Directories: $$wins; \
+	$(emacs) -l finder -f finder-compile-keywords-make-dist $$wins
+
+loaddefs.el:
+	echo ";;; loaddefs.el --- automatically extracted autoloads" >> $@
+	echo ";;" >> $@; echo ";;; Code:" >> $@
+	echo "" >> $@
+	echo ";;; Local Variables:" >> $@
+	echo ";;; version-control: never" >> $@
+	echo ";;; no-byte-compile: t" >> $@
+	echo ";;; no-update-autoloads: t" >> $@
+	echo ";;; End:" >> $@
+	echo ";;; loaddefs.el ends here" >> $@
+autoloads: loaddefs.el doit
+	wd=$(lisp); $(setwins); \
+	echo Directories: $$wins; \
+	$(emacs) -l autoload --eval '(setq generated-autoload-file "$(lisp)/loaddefs.el")' -f batch-update-autoloads $$wins
+
+subdirs.el:
+	$(MAKE) $(MFLAGS) update-subdirs
+update-subdirs: doit
+	wd=$(lisp); $(setwins); \
+	for file in $$wins; do \
+	   $(srcdir)/update-subdirs $$file; \
+	done;
+
+updates: update-subdirs autoloads finder-data custom-deps
+
+TAGS: $(lisptagsfiles1) $(lisptagsfiles2)
+	${ETAGS} $(lisptagsfiles1) $(lisptagsfiles2)
+
+TAGS-LISP: $(lispsource)$(lisptagsfiles1) $(lispsource)$(lisptagsfiles2)
+	${ETAGS} -o TAGS-LISP \
+	  $(lispsource)$(lisptagsfiles1) $(lispsource)$(lisptagsfiles2)
+
+.el.elc: subdirs.el
+	-EMACSLOADPATH=$(lisp) $(emacs) -f batch-byte-compile $<
+
+$(DONTCOMPILE:.el=.elc):
+	-rm -f $@
+
+# Compile all Lisp files, except those from DONTCOMPILE.  This
+# compiles files unconditionally.  All .elc files are made writable
+# before compilation in case we checked out read-only (CVS option -r).
+# Files MUST be compiled one by one.  If we compile several files in a
+# row we can't make sure that the compilation environment is clean.
+# We also set the load-path of the Emacs used for compilation to the
+# current directory and its subdirectories, to make sure require's and
+# load's in the files being compiled find the right files.
+
+compile-files: subdirs.el doit
+	find $(lisp) -name "*.elc" -print | xargs chmod +w; \
+	wd=$(lisp); $(setwins);	\
+	elpat=`echo $$wins | tr ' 	' '\012\012' | \
+		sed -e 's|\(.\)$$|\1/|' -e 's|^\./||' -e 's|$$|*.el|'`;	\
+	els=`echo $$elpat $(DONTCOMPILE) $(COMPILE_FIRST) | \
+		tr '	 ' '\012\012' | sort | uniq -u`; \
+	for el in $(COMPILE_FIRST) $$els; do \
+	  echo Compiling $$el; \
+	  EMACSLOADPATH=$(lisp) $(emacs) -f batch-byte-compile $$el; \
+	done
+
+# Backup compiled Lisp files in elc.tar.gz.  If that file already
+# exists, make a backup of it.
+
+backup-compiled-files:
+	-mv $(lisp)/elc.tar.gz $(lisp)/elc.tar.gz~
+	-tar czf $(lisp)/elc.tar.gz $(lisp)/*.elc $(lisp)/*/*.elc
+
+# Compile Lisp files, but save old compiled files first.
+
+compile: backup-compiled-files compile-files
+
+# Recompile all Lisp files which are newer than their .elc files.
+# Note that this doesn't create .elc files.  It only recompiles if an
+# .elc is present.
+
+recompile: doit
+	$(emacs) -f batch-byte-recompile-directory $(lisp)
+
+# Prepare a bootstrap in the lisp subdirectory.  Build loaddefs.el,
+# because it's not sure it's up-to-date, and if it's not, that might
+# lead to errors during the bootstrap because something fails to
+# autoload as expected.  Remove compiled Lisp files so that
+# bootstrap-emacs will be built from sources only.
+
+bootstrap-clean:
+	if test -f $(EMACS); then $(MAKE) $(MFLAGS) autoloads; fi
+	-rm -f $(lisp)/*.elc $(lisp)/*/*.elc
+
+# Generate/update files for the bootstrap process.
+
+bootstrap: autoloads compile-files custom-deps
+
+# Makefile ends here.