Mercurial > emacs
diff src/.gdbinit @ 88155:d7ddb3e565de
sync with trunk
author | Henrik Enberg <henrik.enberg@telia.com> |
---|---|
date | Mon, 16 Jan 2006 00:03:54 +0000 |
parents | 23a1cea22d13 |
children |
line wrap: on
line diff
--- a/src/.gdbinit Sun Jan 15 23:02:10 2006 +0000 +++ b/src/.gdbinit Mon Jan 16 00:03:54 2006 +0000 @@ -1,4 +1,4 @@ -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 2000, 2001 +# Copyright (C) 1992, 93, 94, 95, 96, 97, 1998, 2000, 01, 2004, 2005, 2006 # Free Software Foundation, Inc. # # This file is part of GNU Emacs. @@ -15,8 +15,8 @@ # # You should have received a copy of the GNU General Public License # along with GNU Emacs; see the file COPYING. If not, write to the -# Free Software Foundation, Inc., 59 Temple Place - Suite 330, -# Boston, MA 02111-1307, USA. +# Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301, USA. # Force loading of symbols, enough to give us gdb_valbits etc. set main @@ -31,135 +31,465 @@ # However, C-z works just as well in that case. handle 2 noprint pass +# Make it work like SIGINT normally does. +handle SIGTSTP nopass + # Don't pass SIGALRM to Emacs. This makes problems when # debugging. handle SIGALRM ignore -# Set up a mask to use. -# This should be EMACS_INT, but in some cases that is a macro. -# long ought to work in all cases right now. -set $valmask = ((long)1 << gdb_valbits) - 1 -set $nonvalbits = gdb_emacs_intbits - gdb_valbits +# $valmask and $tagmask are mask values set up by the xreload macro below. + +# Use $bugfix so that the value isn't a constant. +# Using a constant runs into GDB bugs sometimes. +define xgetptr + set $bugfix = $arg0 + set $ptr = (gdb_use_union ? $bugfix.u.val : $bugfix & $valmask) | gdb_data_seg_bits +end + +define xgetint + set $bugfix = $arg0 + set $int = gdb_use_union ? $bugfix.s.val : (gdb_use_lsb ? $bugfix : $bugfix << gdb_gctypebits) >> gdb_gctypebits +end + +define xgettype + set $bugfix = $arg0 + set $type = gdb_use_union ? $bugfix.s.type : (enum Lisp_Type) (gdb_use_lsb ? $bugfix & $tagmask : $bugfix >> gdb_valbits) +end # Set up something to print out s-expressions. define pr -set debug_print ($) + set debug_print ($) end document pr Print the emacs s-expression which is $. Works only when an inferior emacs is executing. end +# Print out s-expressions +define pp + set $tmp = $arg0 + set safe_debug_print ($tmp) +end +document pp +Print the argument as an emacs s-expression +Works only when an inferior emacs is executing. +end + +# Print out s-expressions from tool bar +define pp1 + set $tmp = $arg0 + echo $arg0 + printf " = " + set safe_debug_print ($tmp) +end +document pp1 +Print the argument as an emacs s-expression +Works only when an inferior emacs is executing. +For use on tool bar when debugging in Emacs +where the variable name would not otherwise +be recorded in the GUD buffer. +end + +# Print value of lisp variable +define pv + set $tmp = "$arg0" + set safe_debug_print ( find_symbol_value (intern ($tmp))) +end +document pv +Print the value of the lisp variable given as argument. +Works only when an inferior emacs is executing. +end + +# Print value of lisp variable +define pv1 + set $tmp = "$arg0" + echo $arg0 + printf " = " + set safe_debug_print (find_symbol_value (intern ($tmp))) +end +document pv1 +Print the value of the lisp variable given as argument. +Works only when an inferior emacs is executing. +For use on tool bar when debugging in Emacs +where the variable name would not otherwise +be recorded in the GUD buffer. +end + +# Print out current buffer point and boundaries +define ppt + set $b = current_buffer + set $t = $b->text + printf "BUF PT: %d", $b->pt + if ($b->pt != $b->pt_byte) + printf "[%d]", $b->pt_byte + end + printf " of 1..%d", $t->z + if ($t->z != $t->z_byte) + printf "[%d]", $t->z_byte + end + if ($b->begv != 1 || $b->zv != $t->z) + printf " NARROW=%d..%d", $b->begv, $b->zv + if ($b->begv != $b->begv_byte || $b->zv != $b->zv_byte) + printf " [%d..%d]", $b->begv_byte, $b->zv_byte + end + end + printf " GAP: %d", $t->gpt + if ($t->gpt != $t->gpt_byte) + printf "[%d]", $t->gpt_byte + end + printf " SZ=%d\n", $t->gap_size +end +document ppt +Print point, beg, end, narrow, and gap for current buffer. +end + +# Print out iterator given as first arg +define pitx + set $it = $arg0 + printf "cur=%d", $it->current.pos.charpos + if ($it->current.pos.charpos != $it->current.pos.bytepos) + printf "[%d]", $it->current.pos.bytepos + end + printf " start=%d", $it->start.pos.charpos + if ($it->start.pos.charpos != $it->start.pos.bytepos) + printf "[%d]", $it->start.pos.bytepos + end + printf " end=%d", $it->end_charpos + printf " stop=%d", $it->stop_charpos + printf " face=%d", $it->face_id + if ($it->multibyte_p) + printf " MB" + end + if ($it->header_line_p) + printf " HL" + end + if ($it->n_overlay_strings > 0) + printf " nov=%d", $it->n_overlay_strings + end + if ($it->sp != 0) + printf " sp=%d", $it->sp + end + if ($it->what == IT_CHARACTER) + if ($it->len == 1 && $it->c >= ' ' && it->c < 255) + printf " ch='%c'", $it->c + else + printf " ch=[%d,%d]", $it->c, $it->len + end + else + if ($it->what == IT_IMAGE) + printf " IMAGE=%d", $it->image_id + else + printf " " + output $it->what + end + end + if ($it->method != GET_FROM_BUFFER) + printf " next=" + output $it->method + if ($it->method == GET_FROM_STRING) + printf "[%d]", $it->current.string_pos.charpos + end + end + printf "\n" + if ($it->region_beg_charpos >= 0) + printf "reg=%d-%d ", $it->region_beg_charpos, $it->region_end_charpos + end + printf "vpos=%d hpos=%d", $it->vpos, $it->hpos, + printf " y=%d lvy=%d", $it->current_y, $it->last_visible_y + printf " x=%d vx=%d-%d", $it->current_x, $it->first_visible_x, $it->last_visible_x + printf " a+d=%d+%d=%d", $it->ascent, $it->descent, $it->ascent+$it->descent + printf " max=%d+%d=%d", $it->max_ascent, $it->max_descent, $it->max_ascent+$it->max_descent + printf "\n" +end +document pitx +Pretty print a display iterator. +Take one arg, an iterator object or pointer. +end + +define pit + pitx it +end +document pit +Pretty print the display iterator it. +end + +define prowx + set $row = $arg0 + printf "y=%d x=%d pwid=%d", $row->y, $row->x, $row->pixel_width + printf " a+d=%d+%d=%d", $row->ascent, $row->height-$row->ascent, $row->height + printf " phys=%d+%d=%d", $row->phys_ascent, $row->phys_height-$row->phys_ascent, $row->phys_height + printf " vis=%d", $row->visible_height + printf " L=%d T=%d R=%d", $row->used[0], $row->used[1], $row->used[2] + printf "\n" + printf "start=%d end=%d", $row->start.pos.charpos, $row->end.pos.charpos + if ($row->enabled_p) + printf " ENA" + end + if ($row->displays_text_p) + printf " DISP" + end + if ($row->mode_line_p) + printf " MODEL" + end + if ($row->continued_p) + printf " CONT" + end + if ($row-> truncated_on_left_p) + printf " TRUNC:L" + end + if ($row-> truncated_on_right_p) + printf " TRUNC:R" + end + if ($row->starts_in_middle_of_char_p) + printf " STARTMID" + end + if ($row->ends_in_middle_of_char_p) + printf " ENDMID" + end + if ($row->ends_in_newline_from_string_p) + printf " ENDNLFS" + end + if ($row->ends_at_zv_p) + printf " ENDZV" + end + if ($row->overlapped_p) + printf " OLAPD" + end + if ($row->overlapping_p) + printf " OLAPNG" + end + printf "\n" +end +document prowx +Pretty print information about glyph_row. +Takes one argument, a row object or pointer. +end + +define prow + prowx row +end +document prow +Pretty print information about glyph_row in row. +end + + +define pcursorx + set $cp = $arg0 + printf "y=%d x=%d vpos=%d hpos=%d", $cp->y, $cp->x, $cp->vpos, $cp->hpos +end +document pcursorx +Pretty print a window cursor +end + +define pcursor + printf "output: " + pcursorx output_cursor + printf "\n" +end +document pcursor +Pretty print the output_cursor +end + +define pwinx + set $w = $arg0 + xgetint $w->sequence_number + if ($w->mini_p != Qnil) + printf "Mini " + end + printf "Window %d ", $int + xgetptr $w->buffer + set $tem = (struct buffer *) $ptr + xgetptr $tem->name + printf "%s", ((struct Lisp_String *) $ptr)->data + printf "\n" + xgetptr $w->start + set $tem = (struct Lisp_Marker *) $ptr + printf "start=%d end:", $tem->charpos + if ($w->window_end_valid != Qnil) + xgetint $w->window_end_pos + printf "pos=%d", $int + xgetint $w->window_end_vpos + printf " vpos=%d", $int + else + printf "invalid" + end + printf " vscroll=%d", $w->vscroll + if ($w->force_start != Qnil) + printf " FORCE_START" + end + if ($w->must_be_updated_p) + printf " MUST_UPD" + end + printf "\n" + printf "cursor: " + pcursorx $w->cursor + printf " phys: " + pcursorx $w->phys_cursor + if ($w->phys_cursor_on_p) + printf " ON" + else + printf " OFF" + end + printf " blk=" + if ($w->last_cursor_off_p != $w->cursor_off_p) + if ($w->last_cursor_off_p) + printf "ON->" + else + printf "OFF->" + end + end + if ($w->cursor_off_p) + printf "ON" + else + printf "OFF" + end + printf "\n" +end +document pwinx +Pretty print a window structure. +Takes one argument, a pointer to a window structure +end + +define pwin + pwinx w +end +document pwin +Pretty print window structure w. +end + + define xtype -output (enum Lisp_Type) (($ >> gdb_valbits) & 0x7) -echo \n -output ((($ >> gdb_valbits) & 0x7) == Lisp_Misc ? (enum Lisp_Misc_Type) (((struct Lisp_Free *) (($ & $valmask) | gdb_data_seg_bits))->type) : (($ >> gdb_valbits) & 0x7) == Lisp_Vectorlike ? ($size = ((struct Lisp_Vector *) (($ & $valmask) | gdb_data_seg_bits))->size, (enum pvec_type) (($size & PVEC_FLAG) ? $size & PVEC_TYPE_MASK : 0)) : 0) -echo \n + xgettype $ + output $type + echo \n + if $type == Lisp_Misc + xmisctype + else + if $type == Lisp_Vectorlike + xvectype + end + end end document xtype Print the type of $, assuming it is an Emacs Lisp value. If the first type printed is Lisp_Vector or Lisp_Misc, -the second line gives the more precise type. -Otherwise the second line doesn't mean anything. +a second line gives the more precise type. end define xvectype -set $size = ((struct Lisp_Vector *) (($ & $valmask) | gdb_data_seg_bits))->size -output (enum pvec_type) (($size & PVEC_FLAG) ? $size & PVEC_TYPE_MASK : 0) -echo \n + xgetptr $ + set $size = ((struct Lisp_Vector *) $ptr)->size + output ($size & PVEC_FLAG) ? (enum pvec_type) ($size & PVEC_TYPE_MASK) : $size & ~gdb_array_mark_flag + echo \n end document xvectype -Print the vector subtype of $, assuming it is a vector or pseudovector. +Print the size or vector subtype of $, assuming it is a vector or pseudovector. end define xmisctype -output (enum Lisp_Misc_Type) (((struct Lisp_Free *) (($ & $valmask) | gdb_data_seg_bits))->type) -echo \n + xgetptr $ + output (enum Lisp_Misc_Type) (((struct Lisp_Free *) $ptr)->type) + echo \n end document xmisctype Print the specific type of $, assuming it is some misc type. end define xint -print (($ & $valmask) << $nonvalbits) >> $nonvalbits + xgetint $ + print $int end document xint Print $, assuming it is an Emacs Lisp integer. This gets the sign right. end define xptr -print (void *) (($ & $valmask) | gdb_data_seg_bits) + xgetptr $ + print (void *) $ptr end document xptr Print the pointer portion of $, assuming it is an Emacs Lisp value. end define xmarker -print (struct Lisp_Marker *) (($ & $valmask) | gdb_data_seg_bits) + xgetptr $ + print (struct Lisp_Marker *) $ptr end document xmarker Print $ as a marker pointer, assuming it is an Emacs Lisp marker value. end define xoverlay -print (struct Lisp_Overlay *) (($ & $valmask) | gdb_data_seg_bits) + xgetptr $ + print (struct Lisp_Overlay *) $ptr end document xoverlay Print $ as a overlay pointer, assuming it is an Emacs Lisp overlay value. end define xmiscfree -print (struct Lisp_Free *) (($ & $valmask) | gdb_data_seg_bits) + xgetptr $ + print (struct Lisp_Free *) $ptr end document xmiscfree Print $ as a misc free-cell pointer, assuming it is an Emacs Lisp Misc value. end define xintfwd -print (struct Lisp_Intfwd *) (($ & $valmask) | gdb_data_seg_bits) + xgetptr $ + print (struct Lisp_Intfwd *) $ptr end document xintfwd Print $ as an integer forwarding pointer, assuming it is an Emacs Lisp Misc value. end define xboolfwd -print (struct Lisp_Boolfwd *) (($ & $valmask) | gdb_data_seg_bits) + xgetptr $ + print (struct Lisp_Boolfwd *) $ptr end document xboolfwd Print $ as a boolean forwarding pointer, assuming it is an Emacs Lisp Misc value. end define xobjfwd -print (struct Lisp_Objfwd *) (($ & $valmask) | gdb_data_seg_bits) + xgetptr $ + print (struct Lisp_Objfwd *) $ptr end document xobjfwd Print $ as an object forwarding pointer, assuming it is an Emacs Lisp Misc value. end define xbufobjfwd -print (struct Lisp_Buffer_Objfwd *) (($ & $valmask) | gdb_data_seg_bits) + xgetptr $ + print (struct Lisp_Buffer_Objfwd *) $ptr end document xbufobjfwd Print $ as a buffer-local object forwarding pointer, assuming it is an Emacs Lisp Misc value. end define xkbobjfwd -print (struct Lisp_Kboard_Objfwd *) (($ & $valmask) | gdb_data_seg_bits) + xgetptr $ + print (struct Lisp_Kboard_Objfwd *) $ptr end document xkbobjfwd Print $ as a kboard-local object forwarding pointer, assuming it is an Emacs Lisp Misc value. end define xbuflocal -print (struct Lisp_Buffer_Local_Value *) (($ & $valmask) | gdb_data_seg_bits) + xgetptr $ + print (struct Lisp_Buffer_Local_Value *) $ptr end document xbuflocal Print $ as a buffer-local-value pointer, assuming it is an Emacs Lisp Misc value. end define xsymbol -print (struct Lisp_Symbol *) ((((int) $) & $valmask) | gdb_data_seg_bits) -xprintsym $ + set $sym = $ + xgetptr $sym + print (struct Lisp_Symbol *) $ptr + xprintsym $sym + echo \n end document xsymbol Print the name and address of the symbol $. @@ -167,9 +497,10 @@ end define xstring -print (struct Lisp_String *) (($ & $valmask) | gdb_data_seg_bits) -output ($->size > 1000) ? 0 : ($->data[0])@($->size_byte < 0 ? $->size : $->size_byte) -echo \n + xgetptr $ + print (struct Lisp_String *) $ptr + xprintstr $ + echo \n end document xstring Print the contents and address of the string $. @@ -177,8 +508,9 @@ end define xvector -print (struct Lisp_Vector *) (($ & $valmask) | gdb_data_seg_bits) -output ($->size > 50) ? 0 : ($->contents[0])@($->size) + xgetptr $ + print (struct Lisp_Vector *) $ptr + output ($->size > 50) ? 0 : ($->contents[0])@($->size & ~gdb_array_mark_flag) echo \n end document xvector @@ -187,32 +519,36 @@ end define xprocess -print (struct Lisp_Process *) (($ & $valmask) | gdb_data_seg_bits) -output *$ -echo \n + xgetptr $ + print (struct Lisp_Process *) $ptr + output *$ + echo \n end document xprocess Print the address of the struct Lisp_process which the Lisp_Object $ points to. end define xframe -print (struct frame *) (($ & $valmask) | gdb_data_seg_bits) + xgetptr $ + print (struct frame *) $ptr end document xframe Print $ as a frame pointer, assuming it is an Emacs Lisp frame value. end define xcompiled -print (struct Lisp_Vector *) (($ & $valmask) | gdb_data_seg_bits) -output ($->contents[0])@($->size & 0xff) + xgetptr $ + print (struct Lisp_Vector *) $ptr + output ($->contents[0])@($->size & 0xff) end document xcompiled Print $ as a compiled function pointer, assuming it is an Emacs Lisp compiled value. end define xwindow -print (struct window *) (($ & $valmask) | gdb_data_seg_bits) -printf "%dx%d+%d+%d\n", $->width, $->height, $->left, $->top + xgetptr $ + print (struct window *) $ptr + printf "%dx%d+%d+%d\n", $->width, $->height, $->left, $->top end document xwindow Print $ as a window pointer, assuming it is an Emacs Lisp window value. @@ -220,27 +556,30 @@ end define xwinconfig -print (struct save_window_data *) (($ & $valmask) | gdb_data_seg_bits) + xgetptr $ + print (struct save_window_data *) $ptr end document xwinconfig Print $ as a window configuration pointer, assuming it is an Emacs Lisp window configuration value. end define xsubr -print (struct Lisp_Subr *) (($ & $valmask) | gdb_data_seg_bits) -output *$ -echo \n + xgetptr $ + print (struct Lisp_Subr *) $ptr + output *$ + echo \n end document xsubr Print the address of the subr which the Lisp_Object $ points to. end define xchartable -print (struct Lisp_Char_Table *) (($ & $valmask) | gdb_data_seg_bits) -printf "Purpose: " -output (char*)&((struct Lisp_Symbol *) ((((int) $->purpose) & $valmask) | gdb_data_seg_bits))->name->data -printf " %d extra slots", ($->size & 0x1ff) - 388 -echo \n + xgetptr $ + print (struct Lisp_Char_Table *) $ptr + printf "Purpose: " + xprintsym $->purpose + printf " %d extra slots", ($->size & 0x1ff) - 388 + echo \n end document xchartable Print the address of the char-table $, and its purpose. @@ -248,9 +587,10 @@ end define xboolvector -print (struct Lisp_Bool_Vector *) (($ & $valmask) | gdb_data_seg_bits) -output ($->size > 256) ? 0 : ($->data[0])@(($->size + 7)/ 8) -echo \n + xgetptr $ + print (struct Lisp_Bool_Vector *) $ptr + output ($->size > 256) ? 0 : ($->data[0])@((($->size & ~gdb_array_mark_flag) + 7)/ 8) + echo \n end document xboolvector Print the contents and address of the bool-vector $. @@ -258,9 +598,11 @@ end define xbuffer -print (struct buffer *) (($ & $valmask) | gdb_data_seg_bits) -output ((struct Lisp_String *) ((($->name) & $valmask) | gdb_data_seg_bits))->data -echo \n + xgetptr $ + print (struct buffer *) $ptr + xgetptr $->name + output ((struct Lisp_String *) $ptr)->data + echo \n end document xbuffer Set $ as a buffer pointer, assuming it is an Emacs Lisp buffer value. @@ -268,24 +610,26 @@ end define xhashtable -print (struct Lisp_Hash_Table *) (($ & $valmask) | gdb_data_seg_bits) + xgetptr $ + print (struct Lisp_Hash_Table *) $ptr end document xhashtable Set $ as a hash table pointer, assuming it is an Emacs Lisp hash table value. end define xcons -print (struct Lisp_Cons *) (($ & $valmask) | gdb_data_seg_bits) -output/x *$ -echo \n + xgetptr $ + print (struct Lisp_Cons *) $ptr + output/x *$ + echo \n end document xcons Print the contents of $, assuming it is an Emacs Lisp cons. end define nextcons -p $.cdr -xcons + p $.u.cdr + xcons end document nextcons Print the contents of the next cell in a list. @@ -293,28 +637,34 @@ (type struct Lisp_Cons) or a pointer to one. end define xcar -print/x ((($ >> gdb_valbits) & 0xf) == Lisp_Cons ? ((struct Lisp_Cons *) (($ & $valmask) | gdb_data_seg_bits))->car : 0) + xgetptr $ + xgettype $ + print/x ($type == Lisp_Cons ? ((struct Lisp_Cons *) $ptr)->car : 0) end document xcar Print the car of $, assuming it is an Emacs Lisp pair. end define xcdr -print/x ((($ >> gdb_valbits) & 0xf) == Lisp_Cons ? ((struct Lisp_Cons *) (($ & $valmask) | gdb_data_seg_bits))->cdr : 0) + xgetptr $ + xgettype $ + print/x ($type == Lisp_Cons ? ((struct Lisp_Cons *) $ptr)->u.cdr : 0) end document xcdr Print the cdr of $, assuming it is an Emacs Lisp pair. end define xfloat -print ((struct Lisp_Float *) (($ & $valmask) | gdb_data_seg_bits))->data + xgetptr $ + print ((struct Lisp_Float *) $ptr)->u.data end document xfloat Print $ assuming it is a lisp floating-point number. end define xscrollbar -print (struct scrollbar *) (($ & $valmask) | gdb_data_seg_bits) + xgetptr $ + print (struct scrollbar *) $ptr output *$ echo \n end @@ -322,11 +672,17 @@ Print $ as a scrollbar pointer. end +define xprintstr + set $data = $arg0->data + output ($arg0->size > 1000) ? 0 : ($data[0])@($arg0->size_byte < 0 ? $arg0->size & ~gdb_array_mark_flag : $arg0->size_byte) +end + define xprintsym - set $sym = (struct Lisp_Symbol *) ((((int) $arg0) & $valmask) | gdb_data_seg_bits) - set $sym_name = ((struct Lisp_String *)(($sym->xname & $valmask) | gdb_data_seg_bits)) - output ($sym_name->data[0])@($sym_name->size_byte < 0 ? $sym_name->size : $sym_name->size_byte) - echo \n + xgetptr $arg0 + set $sym = (struct Lisp_Symbol *) $ptr + xgetptr $sym->xname + set $sym_name = (struct Lisp_String *) $ptr + xprintstr $sym_name end document xprintsym Print argument as a symbol. @@ -335,14 +691,16 @@ define xbacktrace set $bt = backtrace_list while $bt - set $type = (enum Lisp_Type) ((*$bt->function >> gdb_valbits) & 0x7) + xgettype (*$bt->function) if $type == Lisp_Symbol - xprintsym *$bt->function + xprintsym (*$bt->function) + echo \n else printf "0x%x ", *$bt->function if $type == Lisp_Vectorlike - set $size = ((struct Lisp_Vector *) ((*$bt->function & $valmask) | gdb_data_seg_bits))->size - output (enum pvec_type) (($size & PVEC_FLAG) ? $size & PVEC_TYPE_MASK : 0) + xgetptr (*$bt->function) + set $size = ((struct Lisp_Vector *) $ptr)->size + output ($size & PVEC_FLAG) ? (enum pvec_type) ($size & PVEC_TYPE_MASK) : $size & ~gdb_array_mark_flag else printf "Lisp type %d", $type end @@ -357,17 +715,38 @@ an error was signaled. end +# Show Lisp backtrace after normal backtrace. +define hookpost-backtrace + set $bt = backtrace_list + if $bt + echo \n + echo Lisp Backtrace:\n + xbacktrace + end +end + define xreload - set $valmask = ((long)1 << gdb_valbits) - 1 - set $nonvalbits = gdb_emacs_intbits - gdb_valbits + set $tagmask = (((long)1 << gdb_gctypebits) - 1) + set $valmask = gdb_use_lsb ? ~($tagmask) : ((long)1 << gdb_valbits) - 1 end document xreload When starting Emacs a second time in the same gdb session under - FreeBSD 2.2.5, gdb 4.13, $valmask and $nonvalbits have lost + FreeBSD 2.2.5, gdb 4.13, $valmask have lost their values. (The same happens on current (2000) versions of GNU/Linux with gdb 5.0.) This function reloads them. end +xreload + +# Flush display (X only) +define ff + set x_flush (0) +end +document ff +Flush pending X window display updates to screen. +Works only when an inferior emacs is executing. +end + define hook-run xreload @@ -385,11 +764,40 @@ show environment TERM set args -geometry 80x40+0+0 -# Don't let abort actually run, as it will make -# stdio stop working and therefore the `pr' command above as well. -break abort +# People get bothered when they see messages about non-existent functions... +xgetptr Vsystem_type +set $tem = (struct Lisp_Symbol *) $ptr +xgetptr $tem->xname +set $tem = (struct Lisp_String *) $ptr +set $tem = (char *) $tem->data + +# Don't let abort actually run, as it will make stdio stop working and +# therefore the `pr' command above as well. +if $tem[0] == 'w' && $tem[1] == 'i' && $tem[2] == 'n' && $tem[3] == 'd' + # The windows-nt build replaces abort with its own function. + break w32_abort +else + break abort +end -# If we are running in synchronous mode, we want a chance to look around -# before Emacs exits. Perhaps we should put the break somewhere else -# instead... -break x_error_quitter +# x_error_quitter is defined only on X. But window-system is set up +# only at run time, during Emacs startup, so we need to defer setting +# the breakpoint. init_sys_modes is the first function called on +# every platform after init_display, where window-system is set. +tbreak init_sys_modes +commands + silent + xgetptr Vwindow_system + set $tem = (struct Lisp_Symbol *) $ptr + xgetptr $tem->xname + set $tem = (struct Lisp_String *) $ptr + set $tem = (char *) $tem->data + # If we are running in synchronous mode, we want a chance to look + # around before Emacs exits. Perhaps we should put the break + # somewhere else instead... + if $tem[0] == 'x' && $tem[1] == '\0' + break x_error_quitter + end + continue +end +# arch-tag: 12f34321-7bfa-4240-b77a-3cd3a1696dfe