Mercurial > emacs
view src/unexenix.c @ 19713:043ccce224fb
(SIF_*): Win95 macros defined for NT.
(struct tagSCROLLINFO): Win95 struct defined for NT.
(vertical_scroll_bar_min_handle, vertical_scroll_bar_top_border,
vertical_scroll_bar_bottom_border, last_scroll_bar_drag_pos,
Vw32_gab_focus_on_raise, Vw32_capslock_is_shiftlock): New
variables.
(w32_frame_up_to_date): Block input.
(do_line_dance): Use DC while erasing, release at end.
(show_mouse_face): Use column and endcolumn calculated at start of
loop.
(my_create_scrollbar, my_show_window, my_set_window_pos,
my_set_focus) [! ATTACH_THREADS]: Send message to window instead
of invoking Windows procedure.
(x_scroll_bar_create, x_scroll_bar_move, x_scroll_bar_handle_click,
x_scroll_bar_report_motion): Use SCROLLINFO for proportional handle.
(x_scroll_bar_set_handle): Create proportional sized scroll handle.
(w32_set_vertical_scroll_bar): Size handle according to how much
is showing in window.
(x_scroll_bar_set_report_motion): Use top_range, calculated above.
(x_scroll_bar_clear): Hide scroll bar until ready to repaint.
(show_scroll_bars): Pass in frame to my_show_window.
(w32_read_socket): Distinguish between invisible and obscured frames
when handling PAINT messages.
Fixup off-by-one calculation for PAINT and SIZE.
Pass in new parameter to w32_kbd_mods_to_emacs.
Handle WM_DISPLAYCHANGE, WINDOWPOSCHANGED, ACTIVATE, SHOWWINDOW,
INITMENU, and ACTIVATEAPP messages.
Explicitly check for visibile and obscured frames, and to see if
any event should cause a redisplay.
(x_display_bar_cursor): Don't check whether frame is updating here.
(x_display_cursor): Check it here instead.
(x_set_offset) [HAVE_NTGUI]: Don't add border widths.
Set NOACTIVATE when setting window position.
(x_set_window_size): Fixup off-by-one calculation when setting
window position. Mark frame garbaged earlier. Clear mouse
highlighting state.
(x_focus_on_frame): Set focus by making frame the foreground window.
(x_raise_frame): Support frames to be raised without grabbing focus.
(x_lower_frame): Set NOACTIVATE flag when setting window position.
(x_make_frame_visible, x_make_frame_invisible): Pass in frame
to my_show_window.
to my_show_window.
(x_iconify_frame): Send a MINIMIZE message to the window.
(x_wm_set_size_hint): Set font width, line height, border,
and scroll bar indexes instead of X and Y unit indexes.
(w32_initialize): Set input mode. Use w32_msg_worker instead
of windows_msg_worker. Dynamically link proportional scroll bar
functions and intialize proportional scroll bar variables.
(syms_of_w32term): DEFVAR new variables.
(construct_mouse_wheel): New function. Constructs an
input event from a WM_MOUSEWHEEL message.
(w32_read_socket): Handle WM_MOUSEWHEEL.
(w32_read_socket): Pass in new parameter to key_event.
Let key_event determine whether key is dead.
For MOVE, use x_real_positions to map to client coords.
(x_set_mouse_pixel_position): Offset to use client area as origin.
author | Geoff Voelker <voelker@cs.washington.edu> |
---|---|
date | Wed, 03 Sep 1997 01:07:37 +0000 |
parents | ee40177f6c68 |
children | 23a1cea22d13 |
line wrap: on
line source
/* Unexec for Xenix. Note that the GNU project considers support for Xenix operation a peripheral activity which should not be allowed to divert effort from development of the GNU system. Changes in this code will be installed when Xenix users send them in, but aside from that we don't plan to think about it, or about whether other Emacs maintenance might break it. Copyright (C) 1988, 1994 Free Software Foundation, Inc. This file is part of GNU Emacs. GNU Emacs is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GNU Emacs is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU Emacs; see the file COPYING. If not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* On 80386 Xenix, segmentation screws prevent us from modifying the text segment at all. We basically just plug a new value for "data segment size" into the countless headers and copy the other records straight through. The data segment is ORG'ed at the xs_rbase value of the data segment's xseg record (always @ 0x1880000, thanks to the "sophisticated memory management hardware" of the chip) and extends to sbrk(0), exactly. This code is afraid to malloc (should it be?), and alloca has to be the wimpy, malloc-based version; consequently, data is usually copied in smallish chunks. gb@entity.com */ #include <config.h> #include <sys/types.h> #include <fcntl.h> #include <sys/file.h> #include <sys/stat.h> #include <stdio.h> #include <varargs.h> #include <a.out.h> static void fatal_unexec (); #define READ(_fd, _buffer, _size, _error_message, _error_arg) \ errno = EEOF; \ if (read(_fd, _buffer, _size) != _size) \ fatal_unexec(_error_message, _error_arg); #define WRITE(_fd, _buffer, _size, _error_message, _error_arg) \ if (write(_fd, _buffer, _size) != _size) \ fatal_unexec(_error_message, _error_arg); #define SEEK(_fd, _position, _error_message, _error_arg) \ errno = EEOF; \ if (lseek(_fd, _position, L_SET) != _position) \ fatal_unexec(_error_message, _error_arg); extern int errno; extern char *strerror (); #define EEOF -1 #ifndef L_SET #define L_SET 0 #endif /* Should check the magic number of the old executable; not yet written. */ check_exec (x) struct xexec *x; { } unexec (new_name, a_name, data_start, bss_start, entry_address) char *new_name, *a_name; unsigned data_start, bss_start, entry_address; { char *sbrk (), *datalim = sbrk (0), *data_org; long segpos, textseen, textpos, textlen, datapos, datadiff, datalen; struct xexec u_xexec, /* a.out header */ *u_xexecp = &u_xexec; struct xext u_xext, /* extended header */ *u_xextp = &u_xext; struct xseg u_xseg, /* segment table entry */ *u_xsegp = &u_xseg; int i, nsegs, isdata = 0, infd, outfd; infd = open (a_name, O_RDONLY, 0); if (infd < 0) fatal_unexec ("opening %s", a_name); outfd = creat (new_name, 0666); if (outfd < 0) fatal_unexec ("creating %s", new_name); READ (infd, u_xexecp, sizeof (struct xexec), "error reading %s", a_name); check_exec (u_xexecp); READ (infd, u_xextp, sizeof (struct xext), "error reading %s", a_name); segpos = u_xextp->xe_segpos; nsegs = u_xextp->xe_segsize / sizeof (struct xseg); SEEK (infd, segpos, "seek error on %s", a_name); for (i = 0; i < nsegs; i ++) { READ (infd, u_xsegp, sizeof (struct xseg), "error reading %s", a_name); switch (u_xsegp->xs_type) { case XS_TTEXT: { if (i == 0) { textpos = u_xsegp->xs_filpos; textlen = u_xsegp->xs_psize; break; } fatal_unexec ("invalid text segment in %s", a_name); } case XS_TDATA: { if (i == 1) { datapos = u_xsegp->xs_filpos; datalen = datalim - (data_org = (char *)(u_xsegp->xs_rbase)); datadiff = datalen - u_xsegp->xs_psize; break; } fatal_unexec ("invalid data segment in %s", a_name); } default: { if (i > 1) break; fatal_unexec ("invalid segment record in %s", a_name); } } } u_xexecp->x_data = datalen; u_xexecp->x_bss = 0; WRITE (outfd, u_xexecp, sizeof (struct xexec), "error writing %s", new_name); WRITE (outfd, u_xextp, sizeof (struct xext), "error writing %s", new_name); SEEK (infd, segpos, "seek error on %s", a_name); SEEK (outfd, segpos, "seek error on %s", new_name); /* Copy the text segment record verbatim. */ copyrec (infd, outfd, sizeof (struct xseg), a_name, new_name); /* Read, modify, write the data segment record. */ READ (infd, u_xsegp, sizeof (struct xseg), "error reading %s", a_name); u_xsegp->xs_psize = u_xsegp->xs_vsize = datalen; u_xsegp->xs_attr &= (~XS_AITER & ~XS_ABSS); WRITE (outfd, u_xsegp, sizeof (struct xseg), "error writing %s", new_name); /* Now copy any additional segment records, adjusting their file position field */ for (i = 2; i < nsegs; i++) { READ (infd, u_xsegp, sizeof (struct xseg), "error reading %s", a_name); u_xsegp->xs_filpos += datadiff; WRITE (outfd, u_xsegp, sizeof (struct xseg), "error writing %s", new_name); } SEEK (infd, textpos, "seek error on %s", a_name); SEEK (outfd, textpos, "seek error on %s", new_name); copyrec (infd, outfd, textlen, a_name, new_name); SEEK (outfd, datapos, "seek error on %s", new_name); WRITE (outfd, data_org, datalen, "write error on %s", new_name); for (i = 2, segpos += (2 * sizeof (struct xseg)); i < nsegs; i++, segpos += sizeof (struct xseg)) { SEEK (infd, segpos, "seek error on %s", a_name); READ (infd, u_xsegp, sizeof (struct xseg), "read error on %s", a_name); SEEK (infd, u_xsegp->xs_filpos, "seek error on %s", a_name); /* We should be at eof in the output file here, but we must seek because the xs_filpos and xs_psize fields in symbol table segments are inconsistent. */ SEEK (outfd, u_xsegp->xs_filpos + datadiff, "seek error on %s", new_name); copyrec (infd, outfd, u_xsegp->xs_psize, a_name, new_name); } close (infd); close (outfd); mark_x (new_name); return 0; } copyrec (infd, outfd, len, in_name, out_name) int infd, outfd, len; char *in_name, *out_name; { char buf[BUFSIZ]; int chunk; while (len) { chunk = BUFSIZ; if (chunk > len) chunk = len; READ (infd, buf, chunk, "error reading %s", in_name); WRITE (outfd, buf, chunk, "error writing %s", out_name); len -= chunk; } } /* * mark_x * * After successfully building the new a.out, mark it executable */ static mark_x (name) char *name; { struct stat sbuf; int um = umask (777); umask (um); if (stat (name, &sbuf) < 0) fatal_unexec ("getting protection on %s", name); sbuf.st_mode |= 0111 & ~um; if (chmod (name, sbuf.st_mode) < 0) fatal_unexec ("setting protection on %s", name); } static void fatal_unexec (s, va_alist) va_dcl { va_list ap; if (errno == EEOF) fputs ("unexec: unexpected end of file, ", stderr); else fprintf (stderr, "unexec: %s, ", strerror (errno)); va_start (ap); _doprnt (s, ap, stderr); fputs (".\n", stderr); exit (1); }