Mercurial > emacs
view src/vmsmap.c @ 19713:043ccce224fb
(SIF_*): Win95 macros defined for NT.
(struct tagSCROLLINFO): Win95 struct defined for NT.
(vertical_scroll_bar_min_handle, vertical_scroll_bar_top_border,
vertical_scroll_bar_bottom_border, last_scroll_bar_drag_pos,
Vw32_gab_focus_on_raise, Vw32_capslock_is_shiftlock): New
variables.
(w32_frame_up_to_date): Block input.
(do_line_dance): Use DC while erasing, release at end.
(show_mouse_face): Use column and endcolumn calculated at start of
loop.
(my_create_scrollbar, my_show_window, my_set_window_pos,
my_set_focus) [! ATTACH_THREADS]: Send message to window instead
of invoking Windows procedure.
(x_scroll_bar_create, x_scroll_bar_move, x_scroll_bar_handle_click,
x_scroll_bar_report_motion): Use SCROLLINFO for proportional handle.
(x_scroll_bar_set_handle): Create proportional sized scroll handle.
(w32_set_vertical_scroll_bar): Size handle according to how much
is showing in window.
(x_scroll_bar_set_report_motion): Use top_range, calculated above.
(x_scroll_bar_clear): Hide scroll bar until ready to repaint.
(show_scroll_bars): Pass in frame to my_show_window.
(w32_read_socket): Distinguish between invisible and obscured frames
when handling PAINT messages.
Fixup off-by-one calculation for PAINT and SIZE.
Pass in new parameter to w32_kbd_mods_to_emacs.
Handle WM_DISPLAYCHANGE, WINDOWPOSCHANGED, ACTIVATE, SHOWWINDOW,
INITMENU, and ACTIVATEAPP messages.
Explicitly check for visibile and obscured frames, and to see if
any event should cause a redisplay.
(x_display_bar_cursor): Don't check whether frame is updating here.
(x_display_cursor): Check it here instead.
(x_set_offset) [HAVE_NTGUI]: Don't add border widths.
Set NOACTIVATE when setting window position.
(x_set_window_size): Fixup off-by-one calculation when setting
window position. Mark frame garbaged earlier. Clear mouse
highlighting state.
(x_focus_on_frame): Set focus by making frame the foreground window.
(x_raise_frame): Support frames to be raised without grabbing focus.
(x_lower_frame): Set NOACTIVATE flag when setting window position.
(x_make_frame_visible, x_make_frame_invisible): Pass in frame
to my_show_window.
to my_show_window.
(x_iconify_frame): Send a MINIMIZE message to the window.
(x_wm_set_size_hint): Set font width, line height, border,
and scroll bar indexes instead of X and Y unit indexes.
(w32_initialize): Set input mode. Use w32_msg_worker instead
of windows_msg_worker. Dynamically link proportional scroll bar
functions and intialize proportional scroll bar variables.
(syms_of_w32term): DEFVAR new variables.
(construct_mouse_wheel): New function. Constructs an
input event from a WM_MOUSEWHEEL message.
(w32_read_socket): Handle WM_MOUSEWHEEL.
(w32_read_socket): Pass in new parameter to key_event.
Let key_event determine whether key is dead.
For MOVE, use x_real_positions to map to client coords.
(x_set_mouse_pixel_position): Offset to use client area as origin.
author | Geoff Voelker <voelker@cs.washington.edu> |
---|---|
date | Wed, 03 Sep 1997 01:07:37 +0000 |
parents | ee40177f6c68 |
children |
line wrap: on
line source
/* VMS mapping of data and alloc arena for GNU Emacs. Copyright (C) 1986, 1987 Free Software Foundation, Inc. This file is part of GNU Emacs. GNU Emacs is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GNU Emacs is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU Emacs; see the file COPYING. If not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* Written by Mukesh Prasad. */ #ifdef VMS #include <config.h> #include "lisp.h" #include <rab.h> #include <fab.h> #include <rmsdef.h> #include <secdef.h> /* RMS block size */ #define BLOCKSIZE 512 /* Maximum number of bytes to be written in one RMS write. * Must be a multiple of BLOCKSIZE. */ #define MAXWRITE (BLOCKSIZE * 30) /* This funniness is to ensure that sdata occurs alphabetically BEFORE the $DATA psect and that edata occurs after ALL Emacs psects. This is because the VMS linker sorts all psects in a cluster alphabetically during the linking, unless you use the cluster_psect command. Emacs uses the cluster command to group all Emacs psects into one cluster; this keeps the dumped data separate from any loaded libraries. */ globaldef {"$D$ATA"} char sdata[512]; /* Start of saved data area */ globaldef {"__DATA"} char edata[512]; /* End of saved data area */ /* Structure to write into first block of map file. */ struct map_data { char * sdata; /* Start of data area */ char * edata; /* End of data area */ int datablk; /* Block in file to map data area from/to */ }; static void fill_fab (), fill_rab (); static int write_data (); extern char *start_of_data (); extern int vms_out_initial; /* Defined in malloc.c */ /* Maps in the data and alloc area from the map file. */ int mapin_data (name) char * name; { struct FAB fab; struct RAB rab; int status, size; int inadr[2]; struct map_data map_data; /* Open map file. */ fab = cc$rms_fab; fab.fab$b_fac = FAB$M_BIO|FAB$M_GET; fab.fab$l_fna = name; fab.fab$b_fns = strlen (name); status = sys$open (&fab); if (status != RMS$_NORMAL) { printf ("Map file not available, running bare Emacs....\n"); return 0; /* Map file not available */ } /* Connect the RAB block */ rab = cc$rms_rab; rab.rab$l_fab = &fab; rab.rab$b_rac = RAB$C_SEQ; rab.rab$l_rop = RAB$M_BIO; status = sys$connect (&rab); if (status != RMS$_NORMAL) lib$stop (status); /* Read the header data */ rab.rab$l_ubf = &map_data; rab.rab$w_usz = sizeof (map_data); rab.rab$l_bkt = 0; status = sys$read (&rab); if (status != RMS$_NORMAL) lib$stop (status); status = sys$close (&fab); if (status != RMS$_NORMAL) lib$stop (status); if (map_data.sdata != start_of_data ()) { printf ("Start of data area has moved: cannot map in data.\n"); return 0; } if (map_data.edata != edata) { printf ("End of data area has moved: cannot map in data.\n"); return 0; } fab.fab$l_fop |= FAB$M_UFO; status = sys$open (&fab); if (status != RMS$_NORMAL) lib$stop (status); /* Map data area. */ inadr[0] = map_data.sdata; inadr[1] = map_data.edata; status = sys$crmpsc (inadr, 0, 0, SEC$M_CRF | SEC$M_WRT, 0, 0, 0, fab.fab$l_stv, 0, map_data.datablk, 0, 0); if (! (status & 1)) lib$stop (status); } /* Writes the data and alloc area to the map file. */ mapout_data (into) char * into; { struct FAB fab; struct RAB rab; int status; struct map_data map_data; int datasize, msize; if (vms_out_initial) { error ("Out of initial allocation. Must rebuild emacs with more memory (VMS_ALLOCATION_SIZE)."); return 0; } map_data.sdata = start_of_data (); map_data.edata = edata; datasize = map_data.edata - map_data.sdata + 1; map_data.datablk = 2 + (sizeof (map_data) + BLOCKSIZE - 1) / BLOCKSIZE; /* Create map file. */ fab = cc$rms_fab; fab.fab$b_fac = FAB$M_BIO|FAB$M_PUT; fab.fab$l_fna = into; fab.fab$b_fns = strlen (into); fab.fab$l_fop = FAB$M_CBT; fab.fab$b_org = FAB$C_SEQ; fab.fab$b_rat = 0; fab.fab$b_rfm = FAB$C_VAR; fab.fab$l_alq = 1 + map_data.datablk + ((datasize + BLOCKSIZE - 1) / BLOCKSIZE); status = sys$create (&fab); if (status != RMS$_NORMAL) { error ("Could not create map file"); return 0; } /* Connect the RAB block */ rab = cc$rms_rab; rab.rab$l_fab = &fab; rab.rab$b_rac = RAB$C_SEQ; rab.rab$l_rop = RAB$M_BIO; status = sys$connect (&rab); if (status != RMS$_NORMAL) { error ("RMS connect to map file failed"); return 0; } /* Write the header */ rab.rab$l_rbf = &map_data; rab.rab$w_rsz = sizeof (map_data); status = sys$write (&rab); if (status != RMS$_NORMAL) { error ("RMS write (header) to map file failed"); return 0; } if (! write_data (&rab, map_data.datablk, map_data.sdata, datasize)) return 0; status = sys$close (&fab); if (status != RMS$_NORMAL) { error ("RMS close on map file failed"); return 0; } return 1; } static int write_data (rab, firstblock, data, length) struct RAB * rab; char * data; { int status; rab->rab$l_bkt = firstblock; while (length > 0) { rab->rab$l_rbf = data; rab->rab$w_rsz = length > MAXWRITE ? MAXWRITE : length; status = sys$write (rab, 0, 0); if (status != RMS$_NORMAL) { error ("RMS write to map file failed"); return 0; } data = &data[MAXWRITE]; length -= MAXWRITE; rab->rab$l_bkt = 0; } return 1; } /* write_data */ #endif /* VMS */