Mercurial > emacs
view lisp/mail/mh-utils.el @ 47967:0a8bff6f0168
*** empty log message ***
| author | Stefan Monnier <monnier@iro.umontreal.ca> |
|---|---|
| date | Mon, 21 Oct 2002 21:05:04 +0000 |
| parents | 2568d5a27317 |
| children | 8aaba207e44b |
line wrap: on
line source
;;; mh-utils.el --- mh-e code needed for both sending and reading ;; Copyright (C) 1993, 1995, 1997, 2000, 2001, 2002 Free Software Foundation, Inc. ;; Author: Bill Wohler <wohler@newt.com> ;; Maintainer: Bill Wohler <wohler@newt.com> ;; Keywords: mail ;; See: mh-e.el ;; This file is part of GNU Emacs. ;; GNU Emacs is free software; you can redistribute it and/or modify ;; it under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 2, or (at your option) ;; any later version. ;; GNU Emacs is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;; GNU General Public License for more details. ;; You should have received a copy of the GNU General Public License ;; along with GNU Emacs; see the file COPYING. If not, write to the ;; Free Software Foundation, Inc., 59 Temple Place - Suite 330, ;; Boston, MA 02111-1307, USA. ;;; Commentary: ;; Internal support for mh-e package. ;;; Change Log: ;; $Id: mh-utils.el,v 1.79 2002/04/07 19:20:56 wohler Exp $ ;;; Code: (load "executable" t t) ; Non-fatal dependency on ; executable-find ;;; Autoload mh-seq (autoload 'mh-add-to-sequence "mh-seq") (autoload 'mh-notate-seq "mh-seq") (autoload 'mh-read-seq-default "mh-seq") (autoload 'mh-map-to-seq-msgs "mh-seq") ;;; Other Autoloads (autoload 'mail-header-end "sendmail") ;;; Set for local environment: ;;; mh-progs and mh-lib used to be set in paths.el, which tried to ;;; figure out at build time which of several possible directories MH ;;; was installed into. But if you installed MH after building Emacs, ;;; this would almost certainly be wrong, so now we do it at run time. (defvar mh-progs nil "Directory containing MH commands, such as inc, repl, and rmm.") (defvar mh-lib nil "Directory containing the MH library. This directory contains, among other things, the components file.") (defvar mh-lib-progs nil "Directory containing MH helper programs. This directory contains, among other things, the mhl program.") (defvar mh-nmh-p nil "Non-nil if nmh is installed on this system instead of MH.") ;;;###autoload (put 'mh-progs 'risky-local-variable t) ;;;###autoload (put 'mh-lib 'risky-local-variable t) ;;;###autoload (put 'mh-lib-progs 'risky-local-variable t) ;;;###autoload (put 'mh-nmh-p 'risky-local-variable t) ;;; User preferences: (defgroup mh-buffer nil "Layout of MH-E buffers" :prefix "mh-" :group 'mh) (defcustom mh-auto-folder-collect t "*Whether to start collecting MH folder names immediately in the background. Non-nil means start a background process collecting the names of all folders as soon as mh-e is loaded." :type 'boolean :group 'mh) (defcustom mh-recursive-folders nil "*If non-nil, then commands which operate on folders do so recursively." :type 'boolean :group 'mh) (defcustom mh-clean-message-header t "*Non-nil means clean headers of messages that are displayed or inserted. The variables `mh-visible-headers' and `mh-invisible-headers' control what is removed." :type 'boolean :group 'mh-buffer) (defcustom mh-visible-headers nil "*If non-nil, contains a regexp specifying the headers to keep when cleaning. Only used if `mh-clean-message-header' is non-nil. Setting this variable overrides `mh-invisible-headers'." :type '(choice (const nil) regexp) :group 'mh-buffer) (defvar mh-invisible-headers (concat "^" (let ((max-specpdl-size 1000)) ;workaround for insufficient default (regexp-opt '( ;; RFC 822 "Received: " "Message-Id: " "Return-Path: " ;; RFC 2045 "Mime-Version" "Content-" ;; sendmail "X-Authentication-Warning: " "X-MIME-Autoconverted: " "From " "Status: " ;; X400 "X400-" "P1-Message-Id: " "Original-Encoded-Information-Types: " "P1-Recipient: " "P1-Content-Type: " "Ua-Content-Id: " ;; MH "Resent" "Prev-Resent" "Forwarded: " "Replied: " "Delivery-Date: " "In-Reply-To: " "Remailed-" "Via: " "Mail-from: " ;; gnus "X-Gnus-Mail-Source: " ;; MS Outlook "X-Priority: " "X-Msmail-" "X-MimeOLE: " "X-Apparently-From: " "Importance: " "Sensitivity: " "X-MS-TNEF-Correlator: " ;; Juno "X-Juno-" ;; Hotmail "X-OriginalArrivalTime: " "X-Originating-IP: " ;; Netscape/Mozilla "X-Accept-Language: " "X-Mozilla-Status: " ;; NTMail "X-Info: " "X-VSMLoop: " ;; News "NNTP-" "X-News: " ;; Mailman mailing list manager "List-" "X-Beenthere: " "X-Mailman-Version: " ;; Egroups/yahoogroups mailing list manager "X-eGroups-" "X-Apparently-To: " "Mailing-List: " "Delivered-To: " ;; SourceForge mailing list manager "X-Original-Date: " ;; Unknown mailing list managers "X-Mailing-List: " "X-Loop: " "List-Subscribe: " "List-Unsubscribe: " "X-List-Subscribe: " "X-List-Unsubscribe: " "X-Listserver: " "List-" "X-List-Host: " ;; Sieve filtering "X-Sieve: " ;; Worldtalk gateways "X-Wss-Id: " ;; User added "X-Face: " "X-Qotd-" ;; Miscellaneous "X-Sender: " "X-Ack: " "Errors-To: " "Precedence: " "X-Message-Id" "X-From-Line" "X-Cron-Env: " "Delivery: " "X-Delivered" "X-Received: " "X-Vms-To: " "Xref: " "X-Request-" "X-UIDL: " "X-Orcl-Content-Type: " "X-Server-Uuid: " "X-Envelope-Sender: " "X-Envelope-To: " "Encoding: " "Old-Return-Path: " "Path: " "References: " "Lines: " "Autoforwarded: " "Bestservhost: " "X-pgp: " "X-Accept-Language: " "Priority: " "User-Agent: " "X-MIMETrack: " "X-Abuse-Info: " "X-Complaints-To: " "X-No-Archive: " "X-Original-Complaints-To: " "X-Original-Trace: " "X-Received-Date: " "X-Server-Date: " "X-Trace: " "X-UserInfo1: " "X-submission-address: ") t))) "*Regexp matching lines in a message header that are not to be shown. If `mh-visible-headers' is non-nil, it is used instead to specify what to keep.") ;;; Additional header fields that might someday be added: ;;; "Sender: " "Reply-to: " (defcustom mh-bury-show-buffer t "*Non-nil means that the displayed show buffer for a folder is buried." :type 'boolean :group 'mh-buffer) (defcustom mh-summary-height (or (and (fboundp 'frame-height) (> (frame-height) 24) (min 10 (/ (frame-height) 6))) 4) "*Number of lines in MH-Folder window (including the mode line)." :type 'integer :group 'mh-buffer) ;; Use goto-addr if it was already loaded (which probably sets this ;; variable to t), or if this variable is otherwise set to t. (defcustom mh-show-use-goto-addr (and (boundp 'goto-address-highlight-p) goto-address-highlight-p) "*Non-nil means URLs and e-mail addresses are highlighted using goto-addr while in mh-show-mode." :type 'boolean :group 'mh-buffer) (defvar mh-scan-msg-number-regexp "^ *\\([0-9]+\\)" "Regexp to find the number of a message in a scan line. The message's number must be surrounded with \\( \\)") (defvar mh-scan-msg-search-regexp "^[^0-9]*%d[^0-9]" "Format string containing a regexp matching the scan listing for a message. The desired message's number will be an argument to format.") (defcustom mhl-formfile nil "*Name of format file to be used by mhl to show and print messages. A value of T means use the default format file. Nil means don't use mhl to format messages when showing; mhl is still used, with the default format file, to format messages when printing them. The format used should specify a non-zero value for overflowoffset so the message continues to conform to RFC 822 and mh-e can parse the headers." :type '(choice (const nil) (const t) string) :group 'mh) (put 'mhl-formfile 'info-file "mh-e") (defvar mh-decode-quoted-printable-have-mimedecode (not (null (and (fboundp 'executable-find)(executable-find "mimedecode")))) "Whether the mimedecode command is installed on the system. This sets the default value of variable `mh-decode-quoted-printable' to determine whether quoted-printable MIME parts are decode when viewed in `mh-show'. The source code for mimedecode can be obtained from http://www.freesoft.org/CIE/FAQ/mimedeco.c") (defcustom mh-decode-quoted-printable mh-decode-quoted-printable-have-mimedecode "Whether to decode quoted-printable MIME parts in `mh-show'. This can only be done if the 'mimedecode' command is available in the executable path on the system (the mh-decode-quoted-printable-have-mimedecode variable is set if the command was found). That program is used as a helper program to achieve this. The source code for mimedecode can usually be obtained from http://www.freesoft.org/CIE/FAQ/mimedeco.c" :type 'boolean :group 'mh-buffer) (defcustom mh-update-sequences-after-mh-show t "Whether to call `mh-update-sequence' in `mh-show-mode'. If set, `mh-update-sequence' is run every time a message is shown, telling MH or nmh that this is your current message. It's useful, for example, to display MIME content using \"M-! mhshow RET\"" :type 'boolean :group 'mh-buffer) (defcustom mh-highlight-citation-p 'gnus "How to highlight citations in show buffers. The gnus method uses a different color for each indentation." :type '(choice (const :tag "Use gnus" gnus) (const :tag "Use font-lock" font-lock) (const :tag "Don't fontify" nil)) :group 'mh-buffer) (defvar mh-default-folder-for-message-function nil "Function to select a default folder for refiling or Fcc. If set to a function, that function is called with no arguments by `\\[mh-refile-msg]' and `\\[mh-to-fcc]' to get a default when prompting the user for a folder. The function is called from within a `save-excursion', with point at the start of the message. It should return the folder to offer as the refile or Fcc folder, as a string with a leading `+' sign. It can also return an empty string to use no default, or NIL to calculate the default the usual way. NOTE: This variable is not an ordinary hook; It may not be a list of functions.") (defvar mh-find-path-hook nil "Invoked by `mh-find-path' while reading the user's MH profile.") (defvar mh-folder-list-change-hook nil "Invoked whenever the cached folder list `mh-folder-list' is changed.") (defvar mh-show-buffer-mode-line-buffer-id "{show-%s} %d" "Format string to produce `mode-line-buffer-identification' for show buffers. First argument is folder name. Second is message number.") (defvar mh-cmd-note 4 "Offset to insert notation.") (defvar mh-note-seq "%" "String whose first character is used to notate messages in a sequence.") (defvar mh-mail-header-separator "--------" "*Line used by MH to separate headers from text in messages being composed. This variable should not be used directly in programs. Programs should use `mail-header-separator' instead. `mail-header-separator' is initialized to `mh-mail-header-separator' in `mh-letter-mode'; in other contexts, you may have to perform this initialization yourself. Do not make this a regexp as it may be the argument to `insert' and it is passed through `regexp-quote' before being used by functions like `re-search-forward'.") (defun mh-in-header-p () ;; Return non-nil if the point is in the header of a draft message. (< (point) (mail-header-end))) (defun mh-header-field-end () ;; Move to the end of the current header field. ;; Handles RFC 822 continuation lines. (forward-line 1) (while (looking-at "^[ \t]") (forward-line 1)) (backward-char 1)) ;to end of previous line (defun mh-letter-header-font-lock (limit) "Return the entire mail header to font-lock. Argument LIMIT limits search." (if (= (point) limit) nil (let* ((mail-header-end (save-match-data (mail-header-end))) (lesser-limit (if (< mail-header-end limit) mail-header-end limit))) (when (mh-in-header-p) (set-match-data (list 1 lesser-limit)) (goto-char lesser-limit) t)))) (defun mh-header-field-font-lock (field limit) "Return the value of a header field FIELD to font-lock. Argument LIMIT limits search." (if (= (point) limit) nil (let* ((mail-header-end (mail-header-end)) (lesser-limit (if (< mail-header-end limit) mail-header-end limit)) (case-fold-search t)) (when (and (< (point) mail-header-end) ;Only within header (re-search-forward (format "^%s" field) lesser-limit t)) (let ((match-one-b (match-beginning 0)) (match-one-e (match-end 0))) (mh-header-field-end) (if (> (point) limit) ;Don't search for end beyond limit (goto-char limit)) (set-match-data (list match-one-b match-one-e (1+ match-one-e) (point))) t))))) (defun mh-header-to-font-lock (limit) (mh-header-field-font-lock "To:" limit)) (defun mh-header-cc-font-lock (limit) (mh-header-field-font-lock "cc:" limit)) (defun mh-header-subject-font-lock (limit) (mh-header-field-font-lock "Subject:" limit)) (defvar mh-show-to-face 'mh-show-to-face "Face for highlighting the To: header field.") (if (boundp 'facemenu-unlisted-faces) (add-to-list 'facemenu-unlisted-faces "^mh-show")) (defface mh-show-to-face '((((class grayscale) (background light)) (:foreground "DimGray" :underline t)) (((class grayscale) (background dark)) (:foreground "LightGray" :underline t)) (((class color) (background light)) (:foreground "SaddleBrown")) (((class color) (background dark)) (:foreground "burlywood")) (t (:underline t))) "Face for highlighting the To: header field." :group 'mh-buffer) (defvar mh-show-from-face 'mh-show-from-face "Face for highlighting the From: header field.") (defface mh-show-from-face '((((class color) (background light)) (:foreground "red3")) (((class color) (background dark)) (:foreground "cyan")) (t (:bold t))) "Face for highlighting the From: header field." :group 'mh-buffer) (defvar mh-folder-subject-face 'mh-folder-subject-face "Face for highlighting subject text in MH-Folder buffers.") (if (boundp 'facemenu-unlisted-faces) (add-to-list 'facemenu-unlisted-faces "^mh-folder")) (defface mh-folder-subject-face '((((class color) (background light)) (:foreground "blue4")) (((class color) (background dark)) (:foreground "yellow")) (t (:bold t))) "Face for highlighting subject text in MH-Folder buffers." :group 'mh) (defvar mh-show-subject-face 'mh-show-subject-face "Face for highlighting the Subject header field.") (copy-face 'mh-folder-subject-face 'mh-show-subject-face) (eval-after-load "font-lock" '(progn (defvar mh-show-cc-face 'mh-show-cc-face "Face for highlighting cc header fields.") (copy-face 'font-lock-variable-name-face 'mh-show-cc-face) (defvar mh-show-date-face 'mh-show-date-face "Face for highlighting the Date header field.") (copy-face 'font-lock-type-face 'mh-show-date-face) (defvar mh-show-header-face 'mh-show-header-face "Face used to deemphasize unspecified header fields.") (copy-face 'font-lock-string-face 'mh-show-header-face) (defvar mh-show-font-lock-keywords '(("^\\(From:\\|Sender:\\)\\(.*\\)" (1 'default) (2 mh-show-from-face)) (mh-header-to-font-lock (0 'default) (1 mh-show-to-face)) (mh-header-cc-font-lock (0 'default) (1 mh-show-cc-face)) ("^\\(Reply-To:\\|Return-Path:\\)\\(.*\\)$" (1 'default) (2 mh-show-from-face)) (mh-header-subject-font-lock (0 'default) (1 mh-show-subject-face)) ("^\\(Apparently-To:\\|Newsgroups:\\)\\(.*\\)" (1 'default) (2 mh-show-cc-face)) ("^\\(In-reply-to\\|Date\\):\\(.*\\)$" (1 'default) (2 mh-show-date-face)) (mh-letter-header-font-lock (0 mh-show-header-face append t))) "Additional expressions to highlight in MH-show mode.") (defvar mh-show-font-lock-keywords-with-cite (eval-when-compile (let* ((cite-chars "[>|}]") (cite-prefix "A-Za-z") (cite-suffix (concat cite-prefix "0-9_.@-`'\""))) (append mh-show-font-lock-keywords (list ;; Use MATCH-ANCHORED to effectively anchor the regexp left side. `(,cite-chars (,(concat "\\=[ \t]*" "\\(\\([" cite-prefix "]+[" cite-suffix "]*\\)?" "\\(" cite-chars "[ \t]*\\)\\)+" "\\(.*\\)") (beginning-of-line) (end-of-line) (2 font-lock-constant-face nil t) (4 font-lock-comment-face nil t))))))) "Additional expressions to highlight in MH-show mode.") )) (defun mh-gnus-article-highlight-citation () "Highlight cited text in current buffer using gnus." (interactive) (require 'gnus-cite) (let ((modified (buffer-modified-p)) (gnus-article-buffer (buffer-name)) (gnus-cite-face-list '(gnus-cite-face-2 gnus-cite-face-3 gnus-cite-face-4 gnus-cite-face-5 gnus-cite-face-6 gnus-cite-face-7 gnus-cite-face-8 gnus-cite-face-9 gnus-cite-face-10 gnus-cite-face-11 gnus-cite-face-1))) (gnus-article-highlight-citation t) (set-buffer-modified-p modified))) ;;; Internal bookkeeping variables: ;; The value of `mh-folder-list-change-hook' is called whenever ;; mh-folder-list variable is set. ;; List of folder names for completion. (defvar mh-folder-list nil) ;; Cached value of the `Path:' component in the user's MH profile. ;; User's mail folder directory. (defvar mh-user-path nil) ;; An mh-draft-folder of NIL means do not use a draft folder. ;; Cached value of the `Draft-Folder:' component in the user's MH profile. ;; Name of folder containing draft messages. (defvar mh-draft-folder nil) ;; Cached value of the `Unseen-Sequence:' component in the user's MH profile. ;; Name of the Unseen sequence. (defvar mh-unseen-seq nil) ;; Cached value of the `Previous-Sequence:' component in the user's MH ;; profile. ;; Name of the Previous sequence. (defvar mh-previous-seq nil) ;; Cached value of the `Inbox:' component in the user's MH profile, ;; or "+inbox" if no such component. ;; Name of the Inbox folder. (defvar mh-inbox nil) ;; Name of mh-e scratch buffer. (defconst mh-temp-buffer " *mh-temp*") ;; Name of the mh-e folder list buffer. (defconst mh-temp-folders-buffer "*Folders*") ;; Name of the mh-e sequences list buffer. (defconst mh-temp-sequences-buffer "*Sequences*") ;; Window configuration before mh-e command. (defvar mh-previous-window-config nil) ;;Non-nil means next SPC or whatever goes to next undeleted message. (defvar mh-page-to-next-msg-p nil) ;;; Internal variables local to a folder. ;; Name of current folder, a string. (defvar mh-current-folder nil) ;; Buffer that displays message for this folder. (defvar mh-show-buffer nil) ;; Full path of directory for this folder. (defvar mh-folder-filename nil) ;;Number of msgs in buffer. (defvar mh-msg-count nil) ;; If non-nil, show the message in a separate window. (defvar mh-showing-mode nil) ;;; This holds a documentation string used by describe-mode. (defun mh-showing-mode (&optional arg) "Change whether messages should be displayed. With arg, display messages iff ARG is positive." (setq mh-showing-mode (if (null arg) (not mh-showing-mode) (> (prefix-numeric-value arg) 0)))) ;; The sequences of this folder. An alist of (seq . msgs). (defvar mh-seq-list nil) ;; List of displayed messages to be removed from the Unseen sequence. (defvar mh-seen-list nil) ;; If non-nil, show buffer contains message with all headers. ;; If nil, show buffer contains message processed normally. ;; Showing message with headers or normally. (defvar mh-showing-with-headers nil) ;;; mh-e macros (defmacro with-mh-folder-updating (save-modification-flag-p &rest body) ;; Format is (with-mh-folder-updating (SAVE-MODIFICATION-FLAG-P) &body BODY). ;; Execute BODY, which can modify the folder buffer without having to ;; worry about file locking or the read-only flag, and return its result. ;; If SAVE-MODIFICATION-FLAG-P is non-nil, the buffer's modification ;; flag is unchanged, otherwise it is cleared. (setq save-modification-flag-p (car save-modification-flag-p)) ; CL style `(prog1 (let ((mh-folder-updating-mod-flag (buffer-modified-p)) (buffer-read-only nil) (buffer-file-name nil)) ;don't let the buffer get locked (prog1 (progn ,@body) (mh-set-folder-modified-p mh-folder-updating-mod-flag))) ,@(if (not save-modification-flag-p) '((mh-set-folder-modified-p nil))))) (put 'with-mh-folder-updating 'lisp-indent-hook 1) (defmacro mh-in-show-buffer (show-buffer &rest body) ;; Format is (mh-in-show-buffer (SHOW-BUFFER) &body BODY). ;; Display buffer SHOW-BUFFER in other window and execute BODY in it. ;; Stronger than save-excursion, weaker than save-window-excursion. (setq show-buffer (car show-buffer)) ; CL style `(let ((mh-in-show-buffer-saved-window (selected-window))) (switch-to-buffer-other-window ,show-buffer) (if mh-bury-show-buffer (bury-buffer (current-buffer))) (unwind-protect (progn ,@body) (select-window mh-in-show-buffer-saved-window)))) (put 'mh-in-show-buffer 'lisp-indent-hook 1) (defmacro mh-make-seq (name msgs) (list 'cons name msgs)) (defmacro mh-seq-name (pair) (list 'car pair)) (defmacro mh-seq-msgs (pair) (list 'cdr pair)) ;;; Ensure new buffers won't get this mode if default-major-mode is nil. (put 'mh-show-mode 'mode-class 'special) (define-derived-mode mh-show-mode text-mode "MH-Show" "Major mode for showing messages in mh-e. The value of `mh-show-mode-hook' is called when a new message is displayed." (set (make-local-variable 'mail-header-separator) mh-mail-header-separator) (mh-show-unquote-From) (when mh-show-use-goto-addr (if (not (featurep 'goto-addr)) (load "goto-addr" t t)) (if (fboundp 'goto-address) (goto-address))) (make-local-variable 'font-lock-defaults) (set (make-local-variable 'font-lock-support-mode) nil) (cond ((equal mh-highlight-citation-p 'font-lock) (setq font-lock-defaults '(mh-show-font-lock-keywords-with-cite t))) ((equal mh-highlight-citation-p 'gnus) (setq font-lock-defaults '(mh-show-font-lock-keywords t)) (mh-gnus-article-highlight-citation)) (t (setq font-lock-defaults '(mh-show-font-lock-keywords t))))) (defun mh-maybe-show (&optional msg) ;; If in showing mode, then display the message pointed to by the cursor. (if mh-showing-mode (mh-show msg))) (defun mh-show (&optional message) "Show MESSAGE (default: message at cursor). Force a two-window display with the folder window on top (size `mh-summary-height') and the show buffer below it. If the message is already visible, display the start of the message. Display of the message is controlled by setting the variables `mh-clean-message-header' and `mhl-formfile'. The default behavior is to scroll uninteresting headers off the top of the window. Type \"\\[mh-header-display]\" to see the message with all its headers." (interactive) (and mh-showing-with-headers (or mhl-formfile mh-clean-message-header) (mh-invalidate-show-buffer)) (mh-show-msg message)) (defun mh-show-mouse (EVENT) "Move point to mouse EVENT and show message." (interactive "e") (mouse-set-point EVENT) (mh-show)) (defun mh-show-msg (msg) (if (not msg) (setq msg (mh-get-msg-num t))) (mh-showing-mode t) (setq mh-page-to-next-msg-p nil) (let ((folder mh-current-folder) (clean-message-header mh-clean-message-header) (show-window (get-buffer-window mh-show-buffer))) (if (not (eq (next-window (minibuffer-window)) (selected-window))) (delete-other-windows)) ; force ourself to the top window (mh-in-show-buffer (mh-show-buffer) (if (and show-window (equal (mh-msg-filename msg folder) buffer-file-name)) (progn ;just back up to start (goto-char (point-min)) (if (not clean-message-header) (mh-start-of-uncleaned-message))) (mh-display-msg msg folder)))) (if (not (= (1+ (window-height)) (frame-height))) ;not horizontally split (shrink-window (- (window-height) mh-summary-height))) (mh-recenter nil) (if (not (memq msg mh-seen-list)) (setq mh-seen-list (cons msg mh-seen-list))) (when mh-update-sequences-after-mh-show (mh-update-sequences)) (run-hooks 'mh-show-hook)) (defun mh-decode-quoted-printable () ;; Run mimedecode commmand on current buffer, replacing it contents. (let ((case-fold-search t)) (goto-char (point-min)) (when (and (re-search-forward "^content-transfer-encoding:[ \t]*quoted-printable" nil t) (search-forward "\n\n" nil t)) (message "Converting quoted-printable characters...") (let ((modified (buffer-modified-p)) (command "mimedecode")) (shell-command-on-region (point-min) (point-max) command t t) (if (fboundp 'deactivate-mark) (deactivate-mark)) (set-buffer-modified-p modified)) (message "Converting quoted-printable characters... done.")))) (defun mh-show-unquote-From () ;; Decode >From at beginning of lines for mh-show-mode (save-excursion (let ((modified (buffer-modified-p)) (case-fold-search nil)) (goto-char (mail-header-end)) (while (re-search-forward "^>From" nil t) (replace-match "From")) (set-buffer-modified-p modified)))) (defun mh-display-msg (msg-num folder) ;; Display message NUMBER of FOLDER. ;; Sets the current buffer to the show buffer. (set-buffer folder) ;; Bind variables in folder buffer in case they are local (let ((formfile mhl-formfile) (clean-message-header mh-clean-message-header) (invisible-headers mh-invisible-headers) (visible-headers mh-visible-headers) (msg-filename (mh-msg-filename msg-num)) (show-buffer mh-show-buffer)) (if (not (file-exists-p msg-filename)) (error "Message %d does not exist" msg-num)) (set-buffer show-buffer) (cond ((not (equal msg-filename buffer-file-name)) (mh-unvisit-file) (erase-buffer) ;; Changing contents, so this hook needs to be reinitialized. ;; pgp.el uses this. (if (boundp 'write-contents-hooks) ;Emacs 19 (kill-local-variable 'write-contents-hooks)) (if formfile (mh-exec-lib-cmd-output "mhl" "-nobell" "-noclear" (if (stringp formfile) (list "-form" formfile)) msg-filename) (insert-file-contents msg-filename)) (if mh-decode-quoted-printable (mh-decode-quoted-printable)) (goto-char (point-min)) (cond (clean-message-header (mh-clean-msg-header (point-min) invisible-headers visible-headers) (goto-char (point-min))) (t (mh-start-of-uncleaned-message))) ;; the parts of visiting we want to do (no locking) (or (eq buffer-undo-list t) ;don't save undo info for prev msgs (setq buffer-undo-list nil)) (set-buffer-modified-p nil) (set-buffer-auto-saved) ;; the parts of set-visited-file-name we want to do (no locking) (setq buffer-file-name msg-filename) (setq buffer-backed-up nil) (auto-save-mode 1) (set-mark nil) (mh-show-mode) (setq mode-line-buffer-identification (list (format mh-show-buffer-mode-line-buffer-id folder msg-num))) (set-buffer folder) (setq mh-showing-with-headers nil))))) (defun mh-start-of-uncleaned-message () ;; position uninteresting headers off the top of the window (let ((case-fold-search t)) (re-search-forward "^To:\\|^Cc:\\|^From:\\|^Subject:\\|^Date:" nil t) (beginning-of-line) (mh-recenter 0))) (defun mh-invalidate-show-buffer () ;; Invalidate the show buffer so we must update it to use it. (if (get-buffer mh-show-buffer) (save-excursion (set-buffer mh-show-buffer) (mh-unvisit-file)))) (defun mh-unvisit-file () ;; Separate current buffer from the message file it was visiting. (or (not (buffer-modified-p)) (null buffer-file-name) ;we've been here before (yes-or-no-p (format "Message %s modified; flush changes? " (file-name-nondirectory buffer-file-name))) (error "Flushing changes not confirmed")) (clear-visited-file-modtime) (unlock-buffer) (setq buffer-file-name nil)) (defun mh-get-msg-num (error-if-no-message) ;; Return the message number of the displayed message. If the argument ;; ERROR-IF-NO-MESSAGE is non-nil, then complain if the cursor is not ;; pointing to a message. (save-excursion (beginning-of-line) (cond ((looking-at mh-scan-msg-number-regexp) (string-to-int (buffer-substring (match-beginning 1) (match-end 1)))) (error-if-no-message (error "Cursor not pointing to message")) (t nil)))) (defun mh-msg-filename (msg &optional folder) ;; Return the file name of MESSAGE in FOLDER (default current folder). (expand-file-name (int-to-string msg) (if folder (mh-expand-file-name folder) mh-folder-filename))) (defun mh-clean-msg-header (start invisible-headers visible-headers) ;; Flush extraneous lines in a message header, from the given POINT to the ;; end of the message header. If VISIBLE-HEADERS is non-nil, it contains a ;; regular expression specifying the lines to display, otherwise ;; INVISIBLE-HEADERS contains a regular expression specifying lines to ;; delete from the header. (let ((case-fold-search t) (after-change-functions nil)) ;Work around emacs-20 font-lock bug ;causing an endless loop. (save-restriction (goto-char start) (if (search-forward "\n\n" nil 'move) (backward-char 1)) (narrow-to-region start (point)) (goto-char (point-min)) (if visible-headers (while (< (point) (point-max)) (cond ((looking-at visible-headers) (forward-line 1) (while (looking-at "[ \t]") (forward-line 1))) (t (mh-delete-line 1) (while (looking-at "[ \t]") (mh-delete-line 1))))) (while (re-search-forward invisible-headers nil t) (beginning-of-line) (mh-delete-line 1) (while (looking-at "[ \t]") (mh-delete-line 1)))) (unlock-buffer)))) (defun mh-recenter (arg) ;; Like recenter but with two improvements: ;; - only does anything if the current buffer is in the selected ;; window. (Commands like save-some-buffers can make this false.) ;; - nil arg means recenter as with C-u prefix (if (eq (get-buffer-window (current-buffer)) (selected-window)) ;; '(4) is the same as C-u prefix argument. (recenter (if arg arg '(4))))) (defun mh-delete-line (lines) ;; Delete version of kill-line. (delete-region (point) (progn (forward-line lines) (point)))) (defun mh-notate (msg notation offset) ;; Marks MESSAGE with the character NOTATION at position OFFSET. ;; Null MESSAGE means the message that the cursor points to. (save-excursion (if (or (null msg) (mh-goto-msg msg t t)) (with-mh-folder-updating (t) (beginning-of-line) (forward-char offset) (delete-char 1) (insert notation))))) (defun mh-find-msg-get-num (step) ;; Return the message number of the message on the current scan line ;; or one nearby. Jumps over non-message lines, such as inc errors. ;; STEP tells whether to search forward or backward if we have to search. (or (mh-get-msg-num nil) (let ((msg-num nil) (nreverses 0)) (while (and (not msg-num) (< nreverses 2)) (cond ((eobp) (setq step -1) (setq nreverses (1+ nreverses))) ((bobp) (setq step 1) (setq nreverses (1+ nreverses)))) (forward-line step) (setq msg-num (mh-get-msg-num nil))) msg-num))) (defun mh-goto-msg (number &optional no-error-if-no-message dont-show) "Position the cursor at message NUMBER. Optional non-nil second argument NO-ERROR-IF-NO-MESSAGE means return nil instead of signaling an error if message does not exist; in this case, the cursor is positioned near where the message would have been. Non-nil third argument DONT-SHOW means not to show the message." (interactive "NGo to message: ") (setq number (prefix-numeric-value number)) ;Emacs 19 ;; This basic routine tries to be as fast as possible, ;; using a binary search and minimal regexps. (let ((cur-msg (mh-find-msg-get-num -1)) (jump-size mh-msg-count)) (while (and (> jump-size 1) cur-msg (not (eq cur-msg number))) (cond ((< cur-msg number) (setq jump-size (min (- number cur-msg) (ash (1+ jump-size) -1))) (forward-line jump-size) (setq cur-msg (mh-find-msg-get-num 1))) (t (setq jump-size (min (- cur-msg number) (ash (1+ jump-size) -1))) (forward-line (- jump-size)) (setq cur-msg (mh-find-msg-get-num -1))))) (if (eq cur-msg number) (progn (beginning-of-line) (or dont-show (mh-maybe-show number) t)) (if (not no-error-if-no-message) (error "No message %d" number))))) (defun mh-msg-search-pat (n) ;; Return a search pattern for message N in the scan listing. (format mh-scan-msg-search-regexp n)) (defun mh-get-profile-field (field) ;; Find and return the value of FIELD in the current buffer. ;; Returns NIL if the field is not in the buffer. (let ((case-fold-search t)) (goto-char (point-min)) (cond ((not (re-search-forward (format "^%s" field) nil t)) nil) ((looking-at "[\t ]*$") nil) (t (re-search-forward "[\t ]*\\([^\t \n].*\\)$" nil t) (let ((start (match-beginning 1))) (end-of-line) (buffer-substring start (point))))))) (defvar mail-user-agent) (defvar read-mail-command) (defvar mh-find-path-run nil "Non-nil if `mh-find-path' has been run already.") (defun mh-find-path () ;; Set mh-progs, mh-lib, and mh-libs-progs ;; (This step is necessary if MH was installed after this Emacs was dumped.) ;; From profile file, set mh-user-path, mh-draft-folder, ;; mh-unseen-seq, mh-previous-seq, mh-inbox. (mh-find-progs) (unless mh-find-path-run (setq mh-find-path-run t) (setq read-mail-command 'mh-rmail) (setq mail-user-agent 'mh-e-user-agent)) (save-excursion ;; Be sure profile is fully expanded before switching buffers (let ((profile (expand-file-name (or (getenv "MH") "~/.mh_profile")))) (set-buffer (get-buffer-create mh-temp-buffer)) (setq buffer-offer-save nil) ;for people who set default to t (erase-buffer) (condition-case err (insert-file-contents profile) (file-error (mh-install profile err))) (setq mh-user-path (mh-get-profile-field "Path:")) (if (not mh-user-path) (setq mh-user-path "Mail")) (setq mh-user-path (file-name-as-directory (expand-file-name mh-user-path (expand-file-name "~")))) (setq mh-draft-folder (mh-get-profile-field "Draft-Folder:")) (if mh-draft-folder (progn (if (not (mh-folder-name-p mh-draft-folder)) (setq mh-draft-folder (format "+%s" mh-draft-folder))) (if (not (file-exists-p (mh-expand-file-name mh-draft-folder))) (error "Draft folder \"%s\" not found. Create it and try again" (mh-expand-file-name mh-draft-folder))))) (setq mh-inbox (mh-get-profile-field "Inbox:")) (cond ((not mh-inbox) (setq mh-inbox "+inbox")) ((not (mh-folder-name-p mh-inbox)) (setq mh-inbox (format "+%s" mh-inbox)))) (setq mh-unseen-seq (mh-get-profile-field "Unseen-Sequence:")) (if mh-unseen-seq (setq mh-unseen-seq (intern mh-unseen-seq)) (setq mh-unseen-seq 'unseen)) ;old MH default? (setq mh-previous-seq (mh-get-profile-field "Previous-Sequence:")) (if mh-previous-seq (setq mh-previous-seq (intern mh-previous-seq))) (run-hooks 'mh-find-path-hook))) (and mh-auto-folder-collect (let ((mh-no-install t)) ;only get folders if MH installed (condition-case err (mh-make-folder-list-background) (file-error))))) ;so don't complain if not installed (defun mh-file-command-p (file) "Return t if file FILE is the name of a executable regular file." (and (file-regular-p file) (file-executable-p file))) (defun mh-find-progs () "Find the directories for the installed MH/nmh binaries and config files. Set the `mh-progs' and `mh-lib', and `mh-lib-progs' variables to the directory names and set `mh-nmh-p' if we detect nmh instead of MH." (let ((path (or (mh-path-search exec-path "mhparam") (mh-path-search '("/usr/local/nmh/bin" ; nmh default "/usr/local/bin/mh/" "/usr/local/mh/" "/usr/bin/mh/" ;Ultrix 4.2 "/usr/new/mh/" ;Ultrix <4.2 "/usr/contrib/mh/bin/" ;BSDI "/usr/pkg/bin/" ; NetBSD "/usr/local/bin/" ) "mhparam")))) (if (not path) (error "Unable to find the `mhparam' command")) (save-excursion (let ((tmp-buffer (get-buffer-create mh-temp-buffer))) (set-buffer tmp-buffer) (unwind-protect (progn (call-process (expand-file-name "mhparam" path) nil '(t nil) nil "libdir" "etcdir") (goto-char (point-min)) (if (search-forward-regexp "^libdir:\\s-\\(\\S-+\\)\\s-*$" nil t) (setq mh-lib-progs (match-string 1) mh-lib mh-lib-progs mh-progs path)) (goto-char (point-min)) (if (search-forward-regexp "^etcdir:\\s-\\(\\S-+\\)\\s-*$" nil t) (setq mh-lib (match-string 1) mh-nmh-p t))) (kill-buffer tmp-buffer)))) (unless (and mh-progs mh-lib mh-lib-progs) (error "Unable to determine paths from `mhparam' command")))) (defun mh-path-search (path file &optional func-p) ;; Search PATH, a list of directory names, for FILE. ;; Returns the element of PATH that contains FILE, or nil if not found. (while (and path (not (funcall (or func-p 'mh-file-command-p) (expand-file-name file (car path))))) (setq path (cdr path))) (car path)) (defvar mh-no-install nil) ;do not run install-mh (defun mh-install (profile error-val) ;; Called to do error recovery if we fail to read the profile file. ;; If possible, initialize the MH environment. (if (or (getenv "MH") (file-exists-p profile) mh-no-install) (signal (car error-val) (list (format "Cannot read MH profile \"%s\"" profile) (car (cdr (cdr error-val)))))) ;; The "install-mh" command will output a short note which ;; mh-exec-cmd will display to the user. ;; The MH 5 version of install-mh might try prompt the user ;; for information, which would fail here. (mh-exec-cmd (expand-file-name "install-mh" mh-lib-progs) "-auto") ;; now try again to read the profile file (erase-buffer) (condition-case err (insert-file-contents profile) (file-error (signal (car err) ;re-signal with more specific msg (list (format "Cannot read MH profile \"%s\"" profile) (car (cdr (cdr err)))))))) (defun mh-set-folder-modified-p (flag) ;; Mark current folder as modified or unmodified according to FLAG. (set-buffer-modified-p flag)) (defun mh-find-seq (name) (assoc name mh-seq-list)) (defun mh-seq-to-msgs (seq) ;; Return a list of the messages in SEQUENCE. (mh-seq-msgs (mh-find-seq seq))) (defun mh-add-msgs-to-seq (msgs seq &optional internal-flag) ;; Add MESSAGE(s) to the SEQUENCE. If optional FLAG is non-nil, do not mark ;; the message in the scan listing or inform MH of the addition. (let ((entry (mh-find-seq seq))) (if (and msgs (atom msgs)) (setq msgs (list msgs))) (if (null entry) (setq mh-seq-list (cons (mh-make-seq seq msgs) mh-seq-list)) (if msgs (setcdr entry (append msgs (mh-seq-msgs entry))))) (cond ((not internal-flag) (mh-add-to-sequence seq msgs) (mh-notate-seq seq mh-note-seq (1+ mh-cmd-note)))))) (defvar mh-folder-hist nil) (defun mh-prompt-for-folder (prompt default can-create) ;; Prompt for a folder name with PROMPT. Returns the folder's name as a ;; string. DEFAULT is used if the folder exists and the user types return. ;; If the CAN-CREATE flag is t, then a non-existent folder is made. (if (null default) (setq default "")) (let* ((prompt (format "%s folder%s" prompt (if (equal "" default) "? " (format " [%s]? " default)))) read-name folder-name) (if (null mh-folder-list) (mh-set-folder-list)) (while (and (setq read-name (completing-read prompt mh-folder-list nil nil "+" 'mh-folder-hist default)) (equal read-name "") (equal default ""))) (cond ((or (equal read-name "") (equal read-name "+")) (setq read-name default)) ((not (mh-folder-name-p read-name)) (setq read-name (format "+%s" read-name)))) (if (or (not read-name) (equal "" read-name)) (error "No folder specified")) (setq folder-name read-name) (cond ((and (> (length folder-name) 0) (eq (aref folder-name (1- (length folder-name))) ?/)) (setq folder-name (substring folder-name 0 -1)))) (let ((new-file-p (not (file-exists-p (mh-expand-file-name folder-name))))) (cond ((and new-file-p (y-or-n-p (format "Folder %s does not exist. Create it? " folder-name))) (message "Creating %s" folder-name) (call-process "mkdir" nil nil nil (mh-expand-file-name folder-name)) (message "Creating %s...done" folder-name) (setq mh-folder-list (cons (list read-name) mh-folder-list)) (run-hooks 'mh-folder-list-change-hook)) (new-file-p (error "Folder %s is not created" folder-name)) ((not (file-directory-p (mh-expand-file-name folder-name))) (error "\"%s\" is not a directory" (mh-expand-file-name folder-name))) ((and (null (assoc read-name mh-folder-list)) (null (assoc (concat read-name "/") mh-folder-list))) (setq mh-folder-list (cons (list read-name) mh-folder-list)) (run-hooks 'mh-folder-list-change-hook)))) folder-name)) (defvar mh-make-folder-list-process nil) ;The background process collecting the folder list. (defvar mh-folder-list-temp nil) ;mh-folder-list as it is being built. (defvar mh-folder-list-partial-line "") ;Start of last incomplete line from folder process. (defun mh-set-folder-list () ;; Sets mh-folder-list correctly. ;; A useful function for the command line or for when you need to ;; sync by hand. Format is in a form suitable for completing read. (message "Collecting folder names...") (if (not mh-make-folder-list-process) (mh-make-folder-list-background)) (while (eq (process-status mh-make-folder-list-process) 'run) (accept-process-output mh-make-folder-list-process)) (setq mh-folder-list mh-folder-list-temp) (run-hooks 'mh-folder-list-change-hook) (setq mh-folder-list-temp nil) (delete-process mh-make-folder-list-process) (setq mh-make-folder-list-process nil) (message "Collecting folder names...done")) (defun mh-make-folder-list-background () ;; Start a background process to compute a list of the user's folders. ;; Call mh-set-folder-list to wait for the result. (cond ((not mh-make-folder-list-process) (unless mh-inbox (mh-find-path)) (let ((process-connection-type nil)) (setq mh-make-folder-list-process (start-process "folders" nil (expand-file-name "folders" mh-progs) "-fast" (if mh-recursive-folders "-recurse" "-norecurse"))) (set-process-filter mh-make-folder-list-process 'mh-make-folder-list-filter) (process-kill-without-query mh-make-folder-list-process))))) (defun mh-make-folder-list-filter (process output) ;; parse output from "folders -fast" (let ((position 0) line-end new-folder (prevailing-match-data (match-data))) (unwind-protect ;; make sure got complete line (while (setq line-end (string-match "\n" output position)) (setq new-folder (format "+%s%s" mh-folder-list-partial-line (substring output position line-end))) (setq mh-folder-list-partial-line "") ;; is new folder a subfolder of previous? (if (and mh-folder-list-temp (string-match (regexp-quote (concat (car (car mh-folder-list-temp)) "/")) new-folder)) ;; append slash to parent folder for better completion ;; (undone by mh-prompt-for-folder) (setq mh-folder-list-temp (cons (list new-folder) (cons (list (concat (car (car mh-folder-list-temp)) "/")) (cdr mh-folder-list-temp)))) (setq mh-folder-list-temp (cons (list new-folder) mh-folder-list-temp))) (setq position (1+ line-end))) (set-match-data prevailing-match-data)) (setq mh-folder-list-partial-line (substring output position)))) (defun mh-folder-name-p (name) ;; Return non-NIL if NAME is possibly the name of a folder. ;; A name (a string or symbol) can be a folder name if it begins with "+". (if (symbolp name) (eq (aref (symbol-name name) 0) ?+) (and (> (length name) 0) (eq (aref name 0) ?+)))) ;;; Issue commands to MH. (defun mh-exec-cmd (command &rest args) ;; Execute mh-command COMMAND with ARGS. ;; The side effects are what is desired. ;; Any output is assumed to be an error and is shown to the user. ;; The output is not read or parsed by mh-e. (save-excursion (set-buffer (get-buffer-create mh-temp-buffer)) (erase-buffer) (apply 'call-process (expand-file-name command mh-progs) nil t nil (mh-list-to-string args)) (if (> (buffer-size) 0) (save-window-excursion (switch-to-buffer-other-window mh-temp-buffer) (sit-for 5))))) (defun mh-exec-cmd-error (env command &rest args) ;; In environment ENV, execute mh-command COMMAND with args ARGS. ;; ENV is nil or a string of space-separated "var=value" elements. ;; Signals an error if process does not complete successfully. (save-excursion (set-buffer (get-buffer-create mh-temp-buffer)) (erase-buffer) (let ((status (if env ;; the shell hacks necessary here shows just how broken Unix is (apply 'call-process "/bin/sh" nil t nil "-c" (format "%s %s ${1+\"$@\"}" env (expand-file-name command mh-progs)) command (mh-list-to-string args)) (apply 'call-process (expand-file-name command mh-progs) nil t nil (mh-list-to-string args))))) (mh-handle-process-error command status)))) (defun mh-exec-cmd-daemon (command &rest args) ;; Execute MH command COMMAND with ARGS in the background. ;; Any output from command is displayed in an asynchronous pop-up window. (save-excursion (set-buffer (get-buffer-create mh-temp-buffer)) (erase-buffer)) (let* ((process-connection-type nil) (process (apply 'start-process command nil (expand-file-name command mh-progs) (mh-list-to-string args)))) (set-process-filter process 'mh-process-daemon))) (defun mh-process-daemon (process output) ;; Process daemon that puts output into a temporary buffer. (set-buffer (get-buffer-create mh-temp-buffer)) (insert-before-markers output) (display-buffer mh-temp-buffer)) (defun mh-exec-cmd-quiet (raise-error command &rest args) ;; Args are RAISE-ERROR, COMMANDS, ARGS.... ;; Execute MH command COMMAND with ARGS. ARGS is a list of strings. ;; Return at start of mh-temp buffer, where output can be parsed and used. ;; Returns value of call-process, which is 0 for success, ;; unless RAISE-ERROR is non-nil, in which case an error is signaled ;; if call-process returns non-0. (set-buffer (get-buffer-create mh-temp-buffer)) (erase-buffer) (let ((value (apply 'call-process (expand-file-name command mh-progs) nil t nil args))) (goto-char (point-min)) (if raise-error (mh-handle-process-error command value) value))) (defun mh-exec-cmd-output (command display &rest args) ;; Execute MH command COMMAND with DISPLAY flag and ARGS. ;; Put the output into buffer after point. Set mark after inserted text. ;; Output is expected to be shown to user, not parsed by mh-e. (push-mark (point) t) (apply 'call-process (expand-file-name command mh-progs) nil t display (mh-list-to-string args)) (exchange-point-and-mark)) (defun mh-exec-lib-cmd-output (command &rest args) ;; Execute MH library command COMMAND with ARGS. ;; Put the output into buffer after point. Set mark after inserted text. (apply 'mh-exec-cmd-output (expand-file-name command mh-lib-progs) nil args)) (defun mh-handle-process-error (command status) ;; Raise error if COMMAND returned non-0 STATUS, otherwise return STATUS. ;; STATUS is return value from call-process. ;; Program output is in current buffer. ;; If output is too long to include in error message, display the buffer. (cond ((eq status 0) ;success status) ((stringp status) ;kill string (error "%s: %s" command status)) (t ;exit code (cond ((= (buffer-size) 0) ;program produced no error message (error "%s: exit code %d" command status)) (t ;; will error message fit on one line? (goto-line 2) (if (and (< (buffer-size) (frame-width)) (eobp)) (error "%s" (buffer-substring 1 (progn (goto-char 1) (end-of-line) (point)))) (display-buffer (current-buffer)) (error "%s failed with status %d. See error message in other window" command status))))))) (defun mh-expand-file-name (filename &optional default) ;; Just like `expand-file-name', but also handles MH folder names. ;; Assumes that any filename that starts with '+' is a folder name. (if (mh-folder-name-p filename) (expand-file-name (substring filename 1) mh-user-path) (expand-file-name filename default))) (defun mh-list-to-string (l) ;; Flattens the list L and makes every element of the new list into a string. (nreverse (mh-list-to-string-1 l))) (defun mh-list-to-string-1 (l) (let ((new-list nil)) (while l (cond ((null (car l))) ((symbolp (car l)) (setq new-list (cons (symbol-name (car l)) new-list))) ((numberp (car l)) (setq new-list (cons (int-to-string (car l)) new-list))) ((equal (car l) "")) ((stringp (car l)) (setq new-list (cons (car l) new-list))) ((listp (car l)) (setq new-list (nconc (mh-list-to-string-1 (car l)) new-list))) (t (error "Bad element in mh-list-to-string: %s" (car l)))) (setq l (cdr l))) new-list)) (provide 'mh-utils) ;;; mh-utils.el ends here