Mercurial > emacs
view src/systime.h @ 2814:0da5b58e98ed
Install patches from David J. Mackenzie to make the srcdir option
work.
* Makefile.in (srcdir, VPATH): Get this value from the top-level
Makefile.
(INSTALLABLES): Split this into two lists - INSTALLABLES and
INSTALLABLE_SCRIPTS.
(INSTALLABLE_SCRIPTS): New list.
(EXECUTABLES): Include INSTALLABLE_SCRIPTS.
(${archlibdir}): The scripts to be installed live in the source
tree, not in the object tree.
(test-distrib): Note that the data file lives in the source tree,
not the object tree.
(GETOPTDEPS): Note that getopt.h lives in the source tree.
(all other targets): Change references to source files to use
${srcdir}, except for config.h, which lives in the object dir.
(timer.o): Note that this depends on ../src/config.h.
* make-docfile.c (main): Add a -d option, to tell it where to find
the source files.
* test-distrib.c (main): Take the name of the distribution file to
test from the command line.
author | Jim Blandy <jimb@redhat.com> |
---|---|
date | Sat, 15 May 1993 23:06:16 +0000 |
parents | ae964d7149a1 |
children | 37503f466755 |
line wrap: on
line source
/* systime.h - System-dependent definitions for time manipulations. Copyright (C) 1992 Free Software Foundation, Inc. This file is part of GNU Emacs. GNU Emacs is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 1, or (at your option) any later version. GNU Emacs is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU Emacs; see the file COPYING. If not, write to the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifdef TIME_WITH_SYS_TIME #include <sys/time.h> #include <time.h> #else #ifdef HAVE_SYS_TIME_H #include <sys/time.h> #else #include <time.h> #endif #endif /* SVr4 doesn't actually declare this in its #include files. */ #ifdef USG5_4 extern long timezone; #endif #ifdef VMS #ifdef VAXC #include "vmstime.h" #endif #endif /* EMACS_TIME is the type to use to represent temporal intervals - struct timeval on some systems, int on others. It can be passed as the timeout argument to the select system call. EMACS_SECS (TIME) is an rvalue for the seconds component of TIME. EMACS_SET_SECS (TIME, SECONDS) sets that to SECONDS. EMACS_HAS_USECS is defined iff EMACS_TIME has a usecs component. EMACS_USECS (TIME) is an rvalue for the microseconds component of TIME. This returns zero if EMACS_TIME doesn't have a microseconds component. EMACS_SET_USECS (TIME, MICROSECONDS) sets that to MICROSECONDS. This does nothing if EMACS_TIME doesn't have a microseconds component. EMACS_SET_SECS_USECS (TIME, SECS, USECS) sets both components of TIME. EMACS_GET_TIME (TIME) stores the current system time in TIME, which should be an lvalue. EMACS_SET_UTIMES (PATH, ATIME, MTIME) changes the last-access and last-modification times of the file named PATH to ATIME and MTIME, which are EMACS_TIMEs. EMACS_ADD_TIME (DEST, SRC1, SRC2) adds SRC1 to SRC2 and stores the result in DEST. SRC should not be negative. EMACS_SUB_TIME (DEST, SRC1, SRC2) subtracts SRC2 from SRC1 and stores the result in DEST. SRC should not be negative. EMACS_TIME_NEG_P (TIME) is true iff TIME is negative. */ #ifdef HAVE_TIMEVAL #define EMACS_HAS_USECS #define EMACS_TIME struct timeval #define EMACS_SECS(time) ((time).tv_sec + 0) #define EMACS_USECS(time) ((time).tv_usec + 0) #define EMACS_SET_SECS(time, seconds) ((time).tv_sec = (seconds)) #define EMACS_SET_USECS(time, microseconds) ((time).tv_usec = (microseconds)) #define EMACS_GET_TIME(time) \ { \ struct timezone dummy; \ gettimeofday (&(time), &dummy); \ } #define EMACS_ADD_TIME(dest, src1, src2) \ { \ (dest).tv_sec = (src1).tv_sec + (src2).tv_sec; \ (dest).tv_usec = (src1).tv_usec + (src2).tv_usec; \ if ((dest).tv_usec > 1000000) \ (dest).tv_usec -= 1000000, (dest).tv_sec++; \ } #define EMACS_SUB_TIME(dest, src1, src2) \ { \ (dest).tv_sec = (src1).tv_sec - (src2).tv_sec; \ (dest).tv_usec = (src1).tv_usec - (src2).tv_usec; \ if ((dest).tv_usec < 0) \ (dest).tv_usec += 1000000, (dest).tv_sec--; \ } #define EMACS_TIME_NEG_P(time) \ ((time).tv_sec < 0 \ || ((time).tv_sec == 0 \ && (time).tv_usec < 0)) #else /* ! defined (HAVE_TIMEVAL) */ #define EMACS_TIME int #define EMACS_SECS(time) (time) #define EMACS_USECS(time) 0 #define EMACS_SET_SECS(time, seconds) ((time) = (seconds)) #define EMACS_SET_USECS(time, usecs) 0 #define EMACS_GET_TIME(t) ((t) = time ((long *) 0)) #define EMACS_ADD_TIME(dest, src1, src2) ((dest) = (src1) + (src2)) #define EMACS_SUB_TIME(dest, src1, src2) ((dest) = (src1) - (src2)) #define EMACS_TIME_NEG_P(t) ((t) < 0) #endif /* ! defined (HAVE_TIMEVAL) */ #define EMACS_SET_SECS_USECS(time, secs, usecs) \ (EMACS_SET_SECS (time, secs), EMACS_SET_USECS (time, usecs)) #ifdef USE_UTIME #define EMACS_SET_UTIMES(path, atime, mtime) \ { \ time_t tv[2]; \ tv[0] = EMACS_SECS (atime); \ tv[1] = EMACS_SECS (mtime); \ utime ((path), tv); \ } #else /* ! defined (USE_UTIME) */ #define EMACS_SET_UTIMES(path, atime, mtime) \ { \ EMACS_TIME tv[2]; \ tv[0] = atime; \ tv[1] = mtime; \ utimes ((path), tv); \ } #endif /* ! defined (USE_UTIME) */ /* EMACS_CURRENT_TIME_ZONE (int *OFFSET, int *SAVINGS_FLAG, char *STANDARD_ABBR, char *SAVINGS_ABBR); expands to a statement which stores information about the current time zone in its arguments. *OFFSET is set to the number of minutes EAST of Greenwich at which the site's time zone is located. This should describe the offset to standard time only; if some sort of daylight savings time is in effect, that should not affect this value. Note that the tm_gmtoff member of the struct tm returned by localtime is adjusted for daylight savings, so you don't want to use localtime to set *OFFSET; gettimeofday does the right thing. *SAVINGS_FLAG is set to 1 if some sort of daylight savings time is currently in effect, or 0 if no seasonal adjustment is currently active. *STANDARD_ABBR points to an array of at least 10 characters, which should be set to the standard abbreviation for the time zone name when daylight savings time is not active. For example, EDT would be appropriate for the Eastern time zone of the USA. *SAVINGS_ABBR points to an array of at least 10 characters, which should be set to the standard abbreviation for the time zone name when daylight savings time is active. For example, EST would be appropriate for the Eastern time zone of the USA. If the operating system cannot provide all this information, then this macro will not be defined. */ /* The operating system configuration file can define EMACS_CURRENT_TIME_ZONE. If not, we'll take a shot at it here. */ #ifndef EMACS_CURRENT_TIME_ZONE /* System V derivatives have a timezone global variable. */ #if defined(USG) || defined(VMS) #define EMACS_GET_TZ_OFFSET(offset) \ do { \ tzset (); \ *(offset) = timezone; \ } while (0) #endif /* If we have timeval, then we have gettimeofday; that's half the battle. */ #if defined (HAVE_TIMEVAL) && !defined (EMACS_GET_TZ_OFFSET) #define EMACS_GET_TZ_OFFSET(offset) \ do { \ struct timeval dummy; \ struct timezone zoneinfo; \ \ gettimeofday (&dummy, &zoneinfo); \ *(offset) = -zoneinfo.tz_minuteswest; \ } while (0) #endif /* ! defined (HAVE_TIMEVAL) */ /* The following sane systems have a tzname array. The timezone function is a stupid idea; timezone names can only be determined geographically, not by Greenwich offset. */ #if defined (ultrix) || defined (hpux) || defined (_AIX) || defined (USG) || defined(VMS) #define EMACS_GET_TZ_NAMES(standard, savings) \ do { \ extern char *tzname[2]; \ strcpy ((standard), tzname[0]); \ strcpy ((savings), tzname[1]); \ } while (0) #else /* ! defined (ultrix) || defined (hpux) || defined (_AIX) */ /* If we are running SunOS, Mt. Xinu BSD, or MACH 2.5, these systems have a timezone function. */ #if (defined (hp9000) && ! defined (hpux) && defined (unix)) || defined (MACH) || defined (sun) || defined (NeXT) #define EMACS_GET_TZ_NAMES(standard, savings) \ do { \ struct timeval dummy; \ struct timezone zoneinfo; \ extern char *timezone (); \ \ gettimeofday (&dummy, &zoneinfo); \ strcpy ((standard), timezone (zoneinfo.tz_minuteswest, 0)); \ strcpy ((savings), timezone (zoneinfo.tz_minuteswest, 1)); \ } while (0) #endif /* ! (defined (hp9000) && ! defined (hpux) && defined (unix)) || defined (MACH) || defined (sun) */ #endif /* ! defined (ultrix) || defined (hpux) || defined (_AIX) */ /* If we can get all the information we need, let's define the macro! */ #if defined (EMACS_GET_TZ_OFFSET) && defined (EMACS_GET_TZ_NAMES) #define EMACS_CURRENT_TIME_ZONE(offset, savings_flag, standard, savings)\ do { \ EMACS_TIME t; \ long secs; \ struct tm *tmp; \ \ EMACS_GET_TIME (t); \ secs = EMACS_SECS (t); \ tmp = localtime (&secs); \ *(savings_flag) = tmp->tm_isdst; \ \ EMACS_GET_TZ_OFFSET (offset); \ EMACS_GET_TZ_NAMES (standard, savings); \ } while (0) #endif /* ! defined (EMACS_GET_TZ_OFFSET) && defined (EMACS_GET_TZ_NAMES) */ #endif /* EMACS_CURRENT_TIME_ZONE */