Mercurial > emacs
view doc/misc/gnus-coding.texi @ 93823:11a95e2059c8
lisp-eval-defun & lisp-compile-defun: DEFVAR forms reset the variables
to the init values, similar to emacs-lisp eval-defun
author | Sam Steingold <sds@gnu.org> |
---|---|
date | Mon, 07 Apr 2008 16:01:47 +0000 |
parents | d3767aa9ae49 |
children | eafbd7a5c9be |
line wrap: on
line source
\input texinfo @setfilename gnus-coding @settitle Gnus Coding Style and Maintainance Guide @syncodeindex fn cp @syncodeindex vr cp @syncodeindex pg cp @copying Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. @quotation Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with no Invariant Sections, with the Front-Cover texts being ``A GNU Manual'', and with the Back-Cover Texts as in (a) below. A copy of the license is included in the section entitled ``GNU Free Documentation License'' in the Emacs manual. (a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify this GNU Manual, like GNU software. Copies published by the Free Software Foundation raise funds for GNU development.'' This document is part of a collection distributed under the GNU Free Documentation License. If you want to distribute this document separately from the collection, you can do so by adding a copy of the license to the document, as described in section 6 of the license. @end quotation @end copying @titlepage @title Gnus Coding Style and Maintainance Guide @author by Reiner Steib <Reiner.Steib@@gmx.de> @insertcopying @end titlepage @c Obviously this is only a very rudimentary draft. We put it in CVS @c anyway hoping that it might annoy someone enough to fix it. ;-) @c Fixing only a paragraph also is appreciated. @node Top @top Gnus Coding Style and Maintainance Guide This manual describes @dots{} @menu * Gnus Coding Style:: Gnus Coding Style * Gnus Maintainance Guide:: Gnus Maintainance Guide @end menu @c @ref{Gnus Reference Guide, ,Gnus Reference Guide, gnus, The Gnus Newsreader} @node Gnus Coding Style @chapter Gnus Coding Style @section Dependencies The Gnus distribution contains a lot of libraries that have been written for Gnus and used intensively for Gnus. But many of those libraries are useful on their own. E.g. other Emacs Lisp packages might use the @acronym{MIME} library @xref{Top, ,Top, emacs-mime, The Emacs MIME Manual}. @subsection General purpose libraries @table @file @item netrc.el @file{.netrc} parsing functionality. @c As of 2005-10-21... There are no Gnus dependencies in this file. @item format-spec.el Functions for formatting arbitrary formatting strings. @c As of 2005-10-21... There are no Gnus dependencies in this file. @item hex-util.el Functions to encode/decode hexadecimal string. @c As of 2007-08-25... There are no Gnus dependencies in these files. @end table @subsection Encryption and security @table @file @item encrypt.el File encryption routines @c As of 2005-10-25... There are no Gnus dependencies in this file. @item password.el Read passwords from user, possibly using a password cache. @c As of 2005-10-21... There are no Gnus dependencies in this file. @item tls.el TLS/SSL support via wrapper around GnuTLS @c As of 2005-10-21... There are no Gnus dependencies in this file. @item pgg*.el Glue for the various PGP implementations. @c As of 2005-10-21... There are no Gnus dependencies in these files. @item sha1.el SHA1 Secure Hash Algorithm. @c As of 2007-08-25... There are no Gnus dependencies in these files. @end table @subsection Networking @table @file @item dig.el Domain Name System dig interface. @c As of 2005-10-21... There are no serious Gnus dependencies in this file. Uses @code{gnus-run-mode-hooks} (a wrapper function). @item dns.el, dns-mode.el Domain Name Service lookups. @c As of 2005-10-21... There are no Gnus dependencies in these files. @end table @subsection Mail and News related RFCs @table @file @item pop3.el Post Office Protocol (RFC 1460) interface. @c As of 2005-10-21... There are no Gnus dependencies in this file. @item imap.el @acronym{IMAP} library. @c As of 2005-10-21... There are no Gnus dependencies in this file. @item ietf-drums.el Functions for parsing RFC822bis headers. @c As of 2005-10-21... There are no Gnus dependencies in this file. @item rfc1843.el HZ (rfc1843) decoding. HZ is a data format for exchanging files of arbitrarily mixed Chinese and @acronym{ASCII} characters. @c As of 2005-10-21... @code{rfc1843-gnus-setup} seem to be useful only for Gnus. Maybe this function should be relocated to remove dependencies on Gnus. Other minor dependencies: @code{gnus-newsgroup-name} could be eliminated by using an optional argument to @code{rfc1843-decode-article-body}. @item rfc2045.el Functions for decoding rfc2045 headers @c As of 2007-08-25... There are no Gnus dependencies in these files. @item rfc2047.el Functions for encoding and decoding rfc2047 messages @c As of 2007-08-25... There are no Gnus dependencies in these files. @c Only a couple of tests for gnusy symbols. @item rfc2104.el RFC2104 Hashed Message Authentication Codes @c As of 2007-08-25... There are no Gnus dependencies in these files. @item rfc2231.el Functions for decoding rfc2231 headers @c As of 2007-08-25... There are no Gnus dependencies in these files. @item flow-fill.el Interpret RFC2646 "flowed" text. @c As of 2005-10-27... There are no Gnus dependencies in this file. @item uudecode.el Elisp native uudecode. @c As of 2005-12-06... There are no Gnus dependencies in this file. @c ... but the custom group is gnus-extract. @item canlock.el Functions for Cancel-Lock feature @c Cf. draft-ietf-usefor-cancel-lock-01.txt @c Although this draft has expired, Canlock-Lock revived in 2007 when @c major news providers (e.g. news.individual.org) started to use it. @c As of 2007-08-25... There are no Gnus dependencies in these files. @end table @subsection message All message composition from Gnus (both mail and news) takes place in Message mode buffers. Message mode is intended to be a replacement for Emacs mail mode. There should be no Gnus dependencies in @file{message.el}. Alas it is not anymore. Patches and suggestions to remove the dependencies are welcome. @c message.el requires nnheader which requires gnus-util. @subsection Emacs @acronym{MIME} The files @file{mml*.el} and @file{mm-*.el} provide @acronym{MIME} functionality for Emacs. @acronym{MML} (@acronym{MIME} Meta Language) is supposed to be independent from Gnus. Alas it is not anymore. Patches and suggestions to remove the dependencies are welcome. @subsection Gnus backends The files @file{nn*.el} provide functionality for accessing NNTP (@file{nntp.el}), IMAP (@file{nnimap.el}) and several other Mail back ends (probably @file{nnml.el}, @file{nnfolder.el} and @file{nnmaildir.el} are the most widely used mail back ends). @c mm-uu requires nnheader which requires gnus-util. message.el also @c requires nnheader. @section Compatibility No Gnus and Gnus 5.10.10 and up should work on: @itemize @bullet @item Emacs 21.1 and up. @item XEmacs 21.4 and up. @end itemize Gnus 5.10.8 and below should work on: @itemize @bullet @item Emacs 20.7 and up. @item XEmacs 21.1 and up. @end itemize @node Gnus Maintainance Guide @chapter Gnus Maintainance Guide @section Stable and development versions The development of Gnus normally is done on the CVS trunk, i.e. there are no separate branches to develop and test new features. Most of the time, the trunk is developed quite actively with more or less daily changes. Only after a new major release, e.g. 5.10.1, there's usually a feature period of several months. After the release of Gnus 5.10.6 the development of new features started again on the trunk while the 5.10 series is continued on the stable branch (v5-10) from which more stable releases will be done when needed (5.10.8, @dots{}). @ref{Gnus Development, ,Gnus Development, gnus, The Gnus Newsreader} Stable releases of Gnus finally become part of Emacs. E.g. Gnus 5.8 became a part of Emacs 21 (relabeled to Gnus 5.9). The 5.10 series became part of Emacs 22 as Gnus 5.11. @section Syncing @c Some MIDs related to this follow. Use http://thread.gmane.org/MID @c (and click on the subject) to get the thread on Gmane. @c Some quotes from Miles Bader follow... @c <v9eklyke6b.fsf@marauder.physik.uni-ulm.de> @c <buovfd71nkk.fsf@mctpc71.ucom.lsi.nec.co.jp> In the past, the inclusion of Gnus into Emacs was quite cumbersome. For each change made to Gnus in Emacs repository, it had to be checked that it was applied to the new Gnus version, too. Else, bug fixes done in Emacs repository might have been lost. With the inclusion of Gnus 5.10, Miles Bader has set up an Emacs-Gnus gateway to ensure the bug fixes from Emacs CVS are propagated to Gnus CVS semi-automatically. These bug fixes are installed on the stable branch and on the trunk. Basically the idea is that the gateway will cause all common files in Emacs and Gnus v5-10 to be identical except when there's a very good reason (e.g., the Gnus version string in Emacs says @samp{5.11}, but the v5-10 version string remains @samp{5.10.x}). Furthermore, all changes in these files in either Emacs or the v5-10 branch will be installed into the Gnus CVS trunk, again except where there's a good reason. @c (typically so far the only exception has been that the changes @c already exist in the trunk in modified form). Because of this, when the next major version of Gnus will be included in Emacs, it should be very easy -- just plonk in the files from the Gnus trunk without worrying about lost changes from the Emacs tree. The effect of this is that as hacker, you should generally only have to make changes in one place: @itemize @item If it's a file which is thought of as being outside of Gnus (e.g., the new @file{encrypt.el}), you should probably make the change in the Emacs tree, and it will show up in the Gnus tree a few days later. If you don't have Emacs CVS access (or it's inconvenient), you can change such a file in the v5-10 branch, and it should propagate to Emacs CVS -- however, it will get some extra scrutiny (by Miles) to see if the changes are possibly controversial and need discussion on the mailing list. Many changes are obvious bug-fixes however, so often there won't be any problem. @item If it's to a Gnus file, and it's important enough that it should be part of Emacs and the v5-10 branch, then you can make the change on the v5-10 branch, and it will go into Emacs CVS and the Gnus CVS trunk (a few days later). The most prominent examples for such changes are bug-fixed including improvements on the documentation. If you know that there will be conflicts (perhaps because the affected source code is different in v5-10 and the Gnus CVS trunk), then you can install your change in both places, and when I try to sync them, there will be a conflict -- however, since in most such cases there would be a conflict @emph{anyway}, it's often easier for me to resolve it simply if I see two @samp{identical} changes, and can just choose the proper one, rather than having to actually fix the code. @item For general Gnus development changes, of course you just make the change on the Gnus CVS trunk and it goes into Emacs a few years later... :-) @end itemize Of course in any case, if you just can't wait for me to sync your change, you can commit it in more than one place and probably there will be no problem; usually the changes are textually identical anyway, so can be easily resolved automatically (sometimes I notice silly things in such multiple commits, like whitespace differences, and unify those ;-). @c I do Emacs->Gnus less often (than Gnus->Emacs) because it tends to @c require more manual work. @c By default I sync about once a week. I also try to follow any Gnus @c threads on the mailing lists and make sure any changes being discussed @c are kept more up-to-date (so say 1-2 days delay for "topical" changes). @c <buovfd71nkk.fsf@mctpc71.ucom.lsi.nec.co.jp> @c BTW, just to add even more verbose explanation about the syncing thing: @section Miscellanea @heading @file{GNUS-NEWS} Starting from No Gnus, the @file{GNUS-NEWS} is created from @file{texi/gnus-news.texi}. Don't edit @file{GNUS-NEWS}. Edit @file{texi/gnus-news.texi}, type @command{make GNUS-NEWS} in the @file{texi} directory and commit @file{GNUS-NEWS} and @file{texi/gnus-news.texi}. @heading Conventions for version information in defcustoms For new customizable variables introduced in Oort Gnus (including the v5-10 branch) use @code{:version "22.1" ;; Oort Gnus} (including the comment) or e.g. @code{:version "22.2" ;; Gnus 5.10.10} if the feature was added for Emacs 22.2 and Gnus 5.10.10. @c If the variable is new in No Gnus use @code{:version "23.1" ;; No Gnus}. The same applies for customizable variables when its default value was changed. @c Local Variables: @c mode: texinfo @c coding: iso-8859-1 @c End: @ignore arch-tag: ab15234c-2c8a-4cbd-8111-1811bcc6f931 @end ignore