view lib-src/grep-changelog @ 107777:13c077500eb3

2010-04-04 John Wiegley <[e-mail]> * ido.el (ido-use-virtual-buffers): New variable to indicate whether "virtual buffer" support is enabled for IDO. Essentially it works as follows: Say you are visiting a file and the buffer gets cleaned up by mignight.el. Later, you want to switch to that buffer, but find it's no longer open. With virtual buffers enabled, the buffer name stays in the buffer list (using the ido-virtual face, and always at the end), and if you select it, it opens the file back up again. This allows you to think less about whether recently opened files are still open or not. Most of the time you can quit Emacs, restart, and then switch to a file buffer that was previously open as if it still were. NOTE: This feature has been present in iswitchb for several years now, and I'm porting the same logic to IDO. (ido-virtual): Face used to indicate virtual buffers in the list. (ido-buffer-internal): If a buffer is chosen, and no such buffer exists, but a virtual buffer of that name does (which would be why it was in the list), recreate the buffer by reopening the file. (ido-make-buffer-list): If virtual buffers are being used, call `ido-add-virtual-buffers-to-list' before the make list hook. (ido-virtual-buffers): New variable which contains a copy of the current contents of the `recentf-list', albeit pared down for the sake of speed, and with proper faces applied. (ido-add-virtual-buffers-to-list): Using the `recentf-list', create a list of "virtual buffers" to present to the user in addition to the currently open set. Note that this logic could get rather slow if that list is too large. With the default `recentf-max-saved-items' of 200, there is little speed penalty.

#! /usr/bin/perl

# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004,
#               2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
#
# This file is part of GNU Emacs.

# GNU Emacs is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.

# GNU Emacs is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.


# Extract entries from ChangeLogs matching specified criteria.
# Optionally format the resulting output to a form suitable for RCS
# logs, like they are used in Emacs, for example.  In this format,
# author lines, leading spaces, and file names are removed.

require 5;
use strict;

# Parse command line options.

use vars qw($author $regexp $exclude $from_date $to_date
            $rcs_log $with_date $version $help $reverse
            @entries);

use Getopt::Long;

my $result;

if (@ARGV == 0) {

    # No arguments cannot possibly mean "show everything"!!
    $result = 0;

} else {

    $result = GetOptions ("author=s" => \$author,
                          "text=s"  => \$regexp,
                          "exclude=s"  => \$exclude,
                          "from-date=s" => \$from_date,
                          "to-date=s" => \$to_date,
                          "rcs-log" => \$rcs_log,
                          "with-date" => \$with_date,
                          "reverse!" => \$reverse,
                          "version" => \$version,
                          "help"    => \$help);

    # If date options are specified, check that they have the format
    # YYYY-MM-DD.

    $result = 0 if $from_date && $from_date !~ /^\d\d\d\d-\d\d-\d\d$/;
    $result = 0 if $to_date && $to_date !~ /^\d\d\d\d-\d\d-\d\d$/;
}

# Print usage information and exit when necessary.

if ($result == 0 || $help) {
    print <<USAGE;

Usage: $0 [options] [CHANGELOG...]

Print entries in ChangeLogs matching various criteria.
Valid options are:

  --author=AUTHOR         Match entries whose author line matches
			  regular expression AUTHOR
  --text=TEXT             Match entries whose text matches regular
			  expression TEXT
  --exclude=TEXT	  Exclude entries matching TEXT
  --from-date=YYYY-MM-DD  Match entries not older than given date
  --to-date=YYYY-MM-DD    Match entries not younger than given date
  --rcs-log		  Format output suitable for RCS log entries
  --with-date		  Print short date line in RCS log
  --reverse               Show entries in reverse (chronological) order
  --version		  Print version info
  --help		  Print this help

If no CHANGELOG is specified scan the files "ChangeLog" and
"ChangeLog.N+" in the current directory.  Old-style dates in ChangeLogs
are not recognized.
USAGE
    exit !$help;
}

# Print version info and exit if `--version' was specified.

if ($version) {
    print "0.3\n";
    exit 0;
}


# Value is non-zero if HEADER matches according to command line
# options specified, i.e. it matches $author, and its date is in
# the range $from_date <= date <= $to_date.

sub header_match_p {
    my $header = shift;

    return 0 unless $header;

    # No match if AUTHOR-regexp specified and doesn't match.
    return 0 if $author && $header !~ /$author/;

    # Check that the date of the entry matches if date options
    # `--from-date' and/or `--to-date' were specified .  Old-style
    # dates in ChangeLogs are not recognized, and never match.
    if ($from_date || $to_date) {
	if ($header =~ /^(\d\d\d\d-\d\d-\d\d)/) {
	    my $date = $1;
	    return 0 if $from_date && $date lt $from_date;
	    return 0 if $to_date && $date gt $to_date;
	} else {
	    # Don't bother recognizing old-style dates.
	    return 0;
	}
    }

    return 1;
}


# Value is non-zero if ENTRY matches the criteria specified on the
# command line, i.e. it matches $regexp, and it doesn't match
# $exclude.

sub entry_match_p {
    my $entry = shift;

    return 0 unless $entry;

    if ($regexp) {
	return 1 if ($entry =~ /$regexp/
		     && (!$exclude || $entry !~ $exclude));
    } else {
	return 1 if !$exclude || $entry !~ $exclude;
    }

    return 0;
}


# Print HEADER and/or ENTRY in a format suitable for what was
# specified on the command line.  If $rcs_log is specified, author
# lines are not printed, and leading spaces and file names are removed
# from ChangeLog entries.

sub print_log {
    my ($header, $entry) = @_;
    my $output = '';

    if ($rcs_log) {
	# Remove leading whitespace from entry.
	$entry =~ s/^\s+//mg;
	# Remove file name parts.
	$entry =~ s/^\*.*\(/(/mg;
	# Remove file name parts, 2.
	$entry =~ s/^\*.*://mg;
        if ($with_date) {
	    $header =~ /(\d\d\d\d-\d\d-\d\d)/;
	    $output = "!changelog-date $1\n";
	}
	$output .= $entry;
    } else {
	$output .= $header . $entry;
    }

    if ($reverse) {
        push @entries, $output;
    } else {
        print $output;
    }
}

# Scan LOG for matching entries, and print them to standard output.

sub parse_changelog {
    my $log = shift;
    my $entry = undef;
    my $header = undef;

    @entries = () if $reverse;

    # Open the ChangeLog.
    open (IN, "< $log") || die "Cannot open $log: $!";

    while (defined(my $line = <IN>)) {
	if ($line =~ /^\S/) {
	    # Line is an author-line.  Print previous entry if
	    # it matches.
	    print_log ($header, $entry)
		if header_match_p ($header) && entry_match_p ($entry);

	    $entry = "";
  	    $header = $line;

	    # Add empty lines below the header.
	    while (defined($line = <IN>) && $line =~ /^\s*$/) {
	        $header = "$header$line";
	    }
        }

        last unless defined $line;

	if ($line =~ /^\s*\*/) {
	    # LINE is the first line of a ChangeLog entry.  Print
	    # previous entry if it matches.
	    print_log ($header, $entry)
		if header_match_p ($header) && entry_match_p ($entry);
	    $entry = $line;
	} else {
	    # Add LINE to the current entry.
	    $entry = "$entry$line";
	}
    }

    # Print last entry if it matches.
    print_log ($header, $entry)
	if header_match_p ($header) && entry_match_p ($entry);

    close IN;

    if ($reverse) {
        for (my $entry = @entries; $entry; $entry--) {
            print $entries[$entry-1];
        }
    }
}


# Main program.  Process ChangeLogs.

# If files were specified on the command line, parse those files in the
# order supplied by the user; otherwise parse default files ChangeLog and
# ChangeLog.NNN according to $reverse.
unless (@ARGV > 0) {
    @ARGV = ("ChangeLog");

    push @ARGV,
      map {"ChangeLog.$_"}
        sort {$b <=> $a}
          map {/\.(\d+)$/; $1}
            do {
                opendir D, '.';
                grep /^ChangeLog\.\d+$/, readdir D;
            };

    @ARGV = reverse @ARGV if $reverse;
}

while (defined (my $log = shift @ARGV)) {
    parse_changelog ($log) if -f $log;
}


# arch-tag: 9e4f6749-e053-4bb7-b3ad-11947318418e
# grep-changelog ends here.