view lisp/find-lisp.el @ 107777:13c077500eb3

2010-04-04 John Wiegley <[e-mail]> * ido.el (ido-use-virtual-buffers): New variable to indicate whether "virtual buffer" support is enabled for IDO. Essentially it works as follows: Say you are visiting a file and the buffer gets cleaned up by mignight.el. Later, you want to switch to that buffer, but find it's no longer open. With virtual buffers enabled, the buffer name stays in the buffer list (using the ido-virtual face, and always at the end), and if you select it, it opens the file back up again. This allows you to think less about whether recently opened files are still open or not. Most of the time you can quit Emacs, restart, and then switch to a file buffer that was previously open as if it still were. NOTE: This feature has been present in iswitchb for several years now, and I'm porting the same logic to IDO. (ido-virtual): Face used to indicate virtual buffers in the list. (ido-buffer-internal): If a buffer is chosen, and no such buffer exists, but a virtual buffer of that name does (which would be why it was in the list), recreate the buffer by reopening the file. (ido-make-buffer-list): If virtual buffers are being used, call `ido-add-virtual-buffers-to-list' before the make list hook. (ido-virtual-buffers): New variable which contains a copy of the current contents of the `recentf-list', albeit pared down for the sake of speed, and with proper faces applied. (ido-add-virtual-buffers-to-list): Using the `recentf-list', create a list of "virtual buffers" to present to the user in addition to the currently open set. Note that this logic could get rather slow if that list is too large. With the default `recentf-max-saved-items' of 200, there is little speed penalty.

;;; find-lisp.el --- emulation of find in Emacs Lisp

;; Author: Peter Breton
;; Created: Fri Mar 26 1999
;; Keywords: unix

;; Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004,
;;   2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.

;; This file is part of GNU Emacs.

;; GNU Emacs is free software: you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation, either version 3 of the License, or
;; (at your option) any later version.

;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.

;;; Commentary:
;;
;; This is a very generalized form of find; it basically implements a
;; recursive directory descent. The conditions which bound the search
;; are expressed as predicates, and I have not addressed the question
;; of how to wrap up the common chores that find does in a simpler
;; format than writing code for all the various predicates.
;;
;; Some random thoughts are to express simple queries directly with
;; user-level functions, and perhaps use some kind of forms interface
;; for medium-level queries. Really complicated queries can be
;; expressed in Lisp.
;;

;;; Todo
;;
;; It would be nice if we could sort the results without running the find
;; again. Maybe that could work by storing the original file attributes?

;;; Code:

(require 'dired)

(defvar dired-buffers)
(defvar dired-subdir-alist)

;; Internal variables

(defvar find-lisp-regexp nil
  "Internal variable.")

(defconst find-lisp-line-indent "  "
  "Indentation for dired file lines.")

(defvar find-lisp-file-predicate nil
  "Predicate for choosing to include files.")

(defvar find-lisp-directory-predicate nil
  "Predicate for choosing to descend into directories.")

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Debugging Code
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

(defvar find-lisp-debug-buffer "*Find Lisp Debug*"
  "Buffer for debugging information.")

(defvar find-lisp-debug nil
  "Whether debugging is enabled.")

(defun find-lisp-debug-message (message)
  "Print a debug message MESSAGE in `find-lisp-debug-buffer'."
  (set-buffer (get-buffer-create find-lisp-debug-buffer))
  (goto-char (point-max))
  (insert message "\n"))

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Directory and File predicates
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

(defun find-lisp-default-directory-predicate  (dir parent)
  "True if DIR is not a dot file, and not a symlink.
PARENT is the parent directory of DIR."
  (and find-lisp-debug
       (find-lisp-debug-message
	(format "Processing directory %s in %s" dir parent)))
  ;; Skip current and parent directories
  (not (or (string= dir ".")
	   (string= dir "..")
	   ;; Skip directories which are symlinks
	   ;; Easy way to circumvent recursive loops
	   (file-symlink-p (expand-file-name dir parent)))))

(defun find-lisp-default-file-predicate  (file dir)
  "True if FILE matches `find-lisp-regexp'.
DIR is the directory containing FILE."
  (and find-lisp-debug
       (find-lisp-debug-message
	(format "Processing file %s in %s" file dir)))
  (and (not (file-directory-p (expand-file-name file dir)))
       (string-match find-lisp-regexp file)))

(defun find-lisp-file-predicate-is-directory  (file dir)
  "True if FILE is a directory.
Argument DIR is the directory containing FILE."
  (and find-lisp-debug
       (find-lisp-debug-message
	(format "Processing file %s in %s" file dir)))
  (and (file-directory-p (expand-file-name file dir))
       (not (or (string= file ".")
		(string= file "..")))))

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Find functions
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

(defun find-lisp-find-files (directory regexp)
  "Find files in DIRECTORY which match REGEXP."
  (let ((file-predicate      'find-lisp-default-file-predicate)
	(directory-predicate 'find-lisp-default-directory-predicate)
	(find-lisp-regexp regexp))
    (find-lisp-find-files-internal
     directory
     file-predicate
     directory-predicate)))

;; Workhorse function
(defun find-lisp-find-files-internal (directory file-predicate
						directory-predicate)
  "Find files under DIRECTORY which satisfy FILE-PREDICATE.
FILE-PREDICATE is a function which takes two arguments: the file and its
directory.

DIRECTORY-PREDICATE is used to decide whether to descend into directories.
It is a function which takes two arguments, the directory and its parent."
  (setq directory (file-name-as-directory directory))
  (let (results sub-results)
    (dolist (file (directory-files directory nil nil t))
      (let ((fullname (expand-file-name file directory)))
	(when (file-readable-p (expand-file-name file directory))
	  ;; If a directory, check it we should descend into it
	  (and (file-directory-p fullname)
	       (funcall directory-predicate file directory)
	       (progn
		 (setq sub-results
		       (find-lisp-find-files-internal
			fullname
			file-predicate
			directory-predicate))
		 (if results
		     (nconc results sub-results)
		   (setq results sub-results))))
	  ;; For all files and directories, call the file predicate
	  (and (funcall file-predicate file directory)
	       (if results
		   (nconc results (list fullname))
		 (setq results (list fullname)))))))
    results))

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Find-dired all in Lisp
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;;;###autoload
(defun find-lisp-find-dired (dir regexp)
  "Find files in DIR, matching REGEXP."
  (interactive "DFind files in directory: \nsMatching regexp: ")
  (let ((find-lisp-regexp regexp))
    (find-lisp-find-dired-internal
     dir
     'find-lisp-default-file-predicate
     'find-lisp-default-directory-predicate
     "*Find Lisp Dired*")))

;; Just the subdirectories
;;;###autoload
(defun find-lisp-find-dired-subdirectories (dir)
  "Find all subdirectories of DIR."
  (interactive "DFind subdirectories of directory: ")
  (find-lisp-find-dired-internal
   dir
   'find-lisp-file-predicate-is-directory
   'find-lisp-default-directory-predicate
   "*Find Lisp Dired Subdirectories*"))

;; Most of this is lifted from find-dired.el
;;
(defun find-lisp-find-dired-internal (dir file-predicate
					  directory-predicate buffer-name)
  "Run find (Lisp version) and go into Dired mode on a buffer of the output."
  (let ((dired-buffers dired-buffers)
	buf
	(regexp find-lisp-regexp))
    ;; Expand DIR ("" means default-directory), and make sure it has a
    ;; trailing slash.
    (setq dir (file-name-as-directory (expand-file-name dir)))
    ;; Check that it's really a directory.
    (or (file-directory-p dir)
	(error "find-dired needs a directory: %s" dir))
    (or
     (and (buffer-name)
	  (string= buffer-name (buffer-name)))
	(switch-to-buffer (setq buf (get-buffer-create buffer-name))))
    (widen)
    (kill-all-local-variables)
    (setq buffer-read-only nil)
    (erase-buffer)
    (setq default-directory dir)
    (dired-mode dir)

    (use-local-map (append (make-sparse-keymap) (current-local-map)))

    (make-local-variable 'find-lisp-file-predicate)
    (setq find-lisp-file-predicate file-predicate)
    (make-local-variable 'find-lisp-directory-predicate)
    (setq find-lisp-directory-predicate directory-predicate)
    (make-local-variable 'find-lisp-regexp)
    (setq find-lisp-regexp regexp)

    (make-local-variable 'revert-buffer-function)
    (setq revert-buffer-function
	  (function
	   (lambda(ignore1 ignore2)
	     (find-lisp-insert-directory
	      default-directory
	      find-lisp-file-predicate
	      find-lisp-directory-predicate
	      'ignore)
	     )
	   ))

    ;; Set subdir-alist so that Tree Dired will work:
    (if (fboundp 'dired-simple-subdir-alist)
	;; will work even with nested dired format (dired-nstd.el,v 1.15
	;; and later)
	(dired-simple-subdir-alist)
      ;; else we have an ancient tree dired (or classic dired, where
      ;; this does no harm)
      (set (make-local-variable 'dired-subdir-alist)
	   (list (cons default-directory (point-min-marker)))))
    (find-lisp-insert-directory
     dir file-predicate directory-predicate 'ignore)
    (goto-char (point-min))
    (dired-goto-next-file)))

(defun find-lisp-insert-directory  (dir
				    file-predicate
				    directory-predicate
				    sort-function)
  "Insert the results of `find-lisp-find-files' in the current buffer."
  (let ((buffer-read-only nil)
	(files (find-lisp-find-files-internal
		dir
		file-predicate
		directory-predicate))
	(len (length dir)))
    (erase-buffer)
    ;; Subdir headlerline must come first because the first marker in
    ;; subdir-alist points there.
    (insert find-lisp-line-indent dir ":\n")
    ;; Make second line a ``find'' line in analogy to the ``total'' or
    ;; ``wildcard'' line.
    ;;
    ;; No analog for find-lisp?
    (insert find-lisp-line-indent "\n")
    ;; Run the find function
    (mapc
     (function
      (lambda(file)
	(find-lisp-find-dired-insert-file
	 (substring file len)
	 (current-buffer))))
     (sort files 'string-lessp))
    ;; FIXME: Sort function is ignored for now
    ;; (funcall sort-function files))
    (goto-char (point-min))
    (dired-goto-next-file)))

;;;###autoload
(defun find-lisp-find-dired-filter (regexp)
  "Change the filter on a find-lisp-find-dired buffer to REGEXP."
  (interactive "sSet filter to regexp: ")
  (setq find-lisp-regexp regexp)
  (revert-buffer))

(defun find-lisp-find-dired-insert-file (file buffer)
  (set-buffer buffer)
  (insert find-lisp-line-indent
	  (find-lisp-format file (file-attributes file 'string) (list "")
			  (current-time))))

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Lifted from ls-lisp. We don't want to require it, because that
;; would alter the insert-directory function.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

(defun find-lisp-format (file-name file-attr switches now)
  (let ((file-type (nth 0 file-attr)))
    (concat (if (memq ?i switches)	; inode number
		(format "%6d " (nth 10 file-attr)))
	    ;; nil is treated like "" in concat
	    (if (memq ?s switches)	; size in K
		(format "%4d " (1+ (/ (nth 7 file-attr) 1024))))
	    (nth 8 file-attr)		; permission bits
	    (format " %3d %-8s %-8s %8d "
		    (nth 1 file-attr)	; no. of links
		    (if (numberp (nth 2 file-attr))
			(int-to-string (nth 2 file-attr))
		      (nth 2 file-attr)) ; uid
		    (if (eq system-type 'ms-dos)
			"root"		; everything is root on MSDOS.
		      (if (numberp (nth 3 file-attr))
			  (int-to-string (nth 3 file-attr))
			(nth 3 file-attr))) ; gid
		    (nth 7 file-attr)	; size in bytes
		    )
	    (find-lisp-format-time file-attr switches now)
	    " "
	    file-name
	    (if (stringp file-type)	; is a symbolic link
		(concat " -> " file-type)
	      "")
	    "\n")))

(defun find-lisp-time-index (switches)
  ;; Return index into file-attributes according to ls SWITCHES.
  (cond
   ((memq ?c switches) 6)		; last mode change
   ((memq ?u switches) 4)		; last access
   ;; default is last modtime
   (t 5)))

(defun find-lisp-format-time (file-attr switches now)
  ;; Format time string for file with attributes FILE-ATTR according
  ;; to SWITCHES (a list of ls option letters of which c and u are recognized).
  ;; Use the same method as `ls' to decide whether to show time-of-day or year,
  ;; depending on distance between file date and NOW.
  (let* ((time (nth (find-lisp-time-index switches) file-attr))
	 (diff16 (- (car time) (car now)))
	 (diff (+ (ash diff16 16) (- (car (cdr time)) (car (cdr now)))))
	 (past-cutoff (- (* 6 30 24 60 60)))	; 6 30-day months
	 (future-cutoff (* 60 60)))		; 1 hour
    (format-time-string
     (if (and
	  (<= past-cutoff diff) (<= diff future-cutoff)
	  ;; Sanity check in case `diff' computation overflowed.
	  (<= (1- (ash past-cutoff -16)) diff16)
	  (<= diff16 (1+ (ash future-cutoff -16))))
	 "%b %e %H:%M"
       "%b %e  %Y")
     time)))

(provide 'find-lisp)

;; arch-tag: a711374c-f12a-46f6-aa18-ba7d77b9602a
;;; find-lisp.el ends here