view lisp/progmodes/cmacexp.el @ 107777:13c077500eb3

2010-04-04 John Wiegley <[e-mail]> * ido.el (ido-use-virtual-buffers): New variable to indicate whether "virtual buffer" support is enabled for IDO. Essentially it works as follows: Say you are visiting a file and the buffer gets cleaned up by mignight.el. Later, you want to switch to that buffer, but find it's no longer open. With virtual buffers enabled, the buffer name stays in the buffer list (using the ido-virtual face, and always at the end), and if you select it, it opens the file back up again. This allows you to think less about whether recently opened files are still open or not. Most of the time you can quit Emacs, restart, and then switch to a file buffer that was previously open as if it still were. NOTE: This feature has been present in iswitchb for several years now, and I'm porting the same logic to IDO. (ido-virtual): Face used to indicate virtual buffers in the list. (ido-buffer-internal): If a buffer is chosen, and no such buffer exists, but a virtual buffer of that name does (which would be why it was in the list), recreate the buffer by reopening the file. (ido-make-buffer-list): If virtual buffers are being used, call `ido-add-virtual-buffers-to-list' before the make list hook. (ido-virtual-buffers): New variable which contains a copy of the current contents of the `recentf-list', albeit pared down for the sake of speed, and with proper faces applied. (ido-add-virtual-buffers-to-list): Using the `recentf-list', create a list of "virtual buffers" to present to the user in addition to the currently open set. Note that this logic could get rather slow if that list is too large. With the default `recentf-max-saved-items' of 200, there is little speed penalty.

;;; cmacexp.el --- expand C macros in a region

;; Copyright (C) 1992, 1994, 1996, 2000, 2001, 2002, 2003, 2004, 2005,
;;   2006, 2007, 2008, 2009, 2010  Free Software Foundation, Inc.

;; Author: Francesco Potorti` <[e-mail]>
;; Adapted-By: ESR
;; Keywords: c

;; Yoni Rabkin <[e-mail]> contacted the maintainer of this
;; file, and the maintainer agreed that when a bug is filed in the
;; Emacs bug reporting system against this file, a copy of the bug
;; report be sent to the maintainer's email address. However, the
;; maintainer prefers not to be the only person maintaining this file
;; in future.

;; This file is part of GNU Emacs.

;; GNU Emacs is free software: you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation, either version 3 of the License, or
;; (at your option) any later version.

;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.

;;; Commentary:

;; USAGE =============================================================

;; In C mode C-C C-e is bound to c-macro-expand.  The result of the
;; expansion is put in a separate buffer.  A user option allows the
;; window displaying the buffer to be optimally sized.
;;
;; When called with a C-u prefix, c-macro-expand replaces the selected
;; region with the expansion.  Both the preprocessor name and the
;; initial flag can be set by the user.  If c-macro-prompt-flag is set
;; to a non-nil value the user is offered to change the options to the
;; preprocessor each time c-macro-expand is invoked.  Preprocessor
;; arguments default to the last ones entered.  If c-macro-prompt-flag
;; is nil, one must use M-x set-variable to set a different value for
;; c-macro-cppflags.

;; A c-macro-expansion function is provided for non-interactive use.

;; INSTALLATION ======================================================

;; Put the following in your ~/.emacs file.

;; If you want the *Macroexpansion* window to be not higher than
;; necessary:
;;(setq c-macro-shrink-window-flag t)
;;
;; If you use a preprocessor other than /lib/cpp (be careful to set a
;; -C option or equivalent in order to make the preprocessor not to
;; strip the comments):
;;(setq c-macro-preprocessor "gpp -C")
;;
;; If you often use a particular set of flags:
;;(setq c-macro-cppflags "-I /usr/include/local -DDEBUG"
;;
;; If you want the "Preprocessor arguments: " prompt:
;;(setq c-macro-prompt-flag t)

;; BUG REPORTS =======================================================

;; Please report bugs, suggestions, complaints and so on to
;; [e-mail] (Francesco Potorti`).

;; IMPROVEMENTS OVER emacs 18.xx cmacexp.el ==========================

;; - A lot of user and programmer visible changes.  See above.
;; - #line directives are inserted, so __LINE__ and __FILE__ are
;;   correctly expanded.  Works even with START inside a string, a
;;   comment or a region #ifdef'd away by cpp. cpp is invoked with -C,
;;   making comments visible in the expansion.
;; - All work is done in core memory, no need for temporary files.

;; ACKNOWLEDGEMENTS ==================================================

;; A lot of thanks to Don Maszle who did a great work of testing, bug
;; reporting and suggestion of new features.  This work has been
;; partially inspired by Don Maszle and Jonathan Segal's.

;; BUGS ==============================================================

;; If the start point of the region is inside a macro definition the
;; macro expansion is often inaccurate.

;;; Code:

(require 'cc-mode)

(provide 'cmacexp)

(defvar msdos-shells)


(defgroup c-macro nil
  "Expand C macros in a region."
  :group 'c)


(defcustom c-macro-shrink-window-flag nil
  "*Non-nil means shrink the *Macroexpansion* window to fit its contents."
  :type 'boolean
  :group 'c-macro)

(defcustom c-macro-prompt-flag nil
  "*Non-nil makes `c-macro-expand' prompt for preprocessor arguments."
  :type 'boolean
  :group 'c-macro)

(defcustom c-macro-preprocessor
  (cond ;; Solaris has it in an unusual place.
	((and (string-match "^[^-]*-[^-]*-\\(solaris\\|sunos5\\)"
			    system-configuration)
	      (file-exists-p "/opt/SUNWspro/SC3.0.1/bin/acomp"))
	 "/opt/SUNWspro/SC3.0.1/bin/acomp -C -E")
        ((locate-file "/usr/ccs/lib/cpp"
		      '("/") exec-suffixes 'file-executable-p)
	 "/usr/ccs/lib/cpp -C")
	((locate-file "/lib/cpp"
		      '("/") exec-suffixes 'file-executable-p)
	 "/lib/cpp -C")
	;; On some systems, we cannot rely on standard directories to
	;; find CPP.  In fact, we cannot rely on having cpp, either,
	;; in some GCC versions.
	((locate-file "cpp" exec-path exec-suffixes 'file-executable-p)
	 "cpp -C")
	(t "gcc -E -C -o - -"))
  "The preprocessor used by the cmacexp package.

If you change this, be sure to preserve the `-C' (don't strip comments)
option, or to set an equivalent one."
  :type 'string
  :group 'c-macro)

(defcustom c-macro-cppflags ""
  "*Preprocessor flags used by `c-macro-expand'."
  :type 'string
  :group 'c-macro)

(defconst c-macro-buffer-name "*Macroexpansion*")

;;;###autoload
(defun c-macro-expand (start end subst)
  "Expand C macros in the region, using the C preprocessor.
Normally display output in temp buffer, but
prefix arg means replace the region with it.

`c-macro-preprocessor' specifies the preprocessor to use.
Tf the user option `c-macro-prompt-flag' is non-nil
prompt for arguments to the preprocessor \(e.g. `-DDEBUG -I ./include'),
otherwise use `c-macro-cppflags'.

Noninteractive args are START, END, SUBST.
For use inside Lisp programs, see also `c-macro-expansion'."

  (interactive "r\nP")
  (let ((inbuf (current-buffer))
	(displaybuf (if subst
			(get-buffer c-macro-buffer-name)
		      (get-buffer-create c-macro-buffer-name)))
	(expansion ""))
    ;; Build the command string.
    (if c-macro-prompt-flag
	(setq c-macro-cppflags
	      (read-string "Preprocessor arguments: "
			   c-macro-cppflags)))
    ;; Decide where to display output.
    (if (and subst
	     (and buffer-read-only (not inhibit-read-only))
	     (not (eq inbuf displaybuf)))
	(progn
	  (message
	   "Buffer is read only: displaying expansion in alternate window")
	  (sit-for 2)
	  (setq subst nil)
	  (or displaybuf
	      (setq displaybuf (get-buffer-create c-macro-buffer-name)))))
    ;; Expand the macro and output it.
    (setq expansion (c-macro-expansion start end
				       (concat c-macro-preprocessor " "
					       c-macro-cppflags) t))
    (if subst
	(let ((exchange (= (point) start)))
	  (delete-region start end)
	  (insert expansion)
	  (if exchange
	      (exchange-point-and-mark)))
      (set-buffer displaybuf)
      (setq buffer-read-only nil)
      (buffer-disable-undo displaybuf)
      (erase-buffer)
      (insert expansion)
      (set-buffer-modified-p nil)
      (if (string= "" expansion)
	  (message "Null expansion")
	(c-macro-display-buffer))
      (setq buffer-read-only t)
      (setq buffer-auto-save-file-name nil)
      (bury-buffer displaybuf))))


;; Display the current buffer in a window which is either just large
;; enough to contain the entire buffer, or half the size of the
;; screen, whichever is smaller.  Do not select the new
;; window.
;;
;; Several factors influence window resizing so that the window is
;; sized optimally if it is created anew, and so that it is messed
;; with minimally if it has been created by the user.  If the window
;; chosen for display exists already but contains something else, the
;; window is not re-sized.  If the window already contains the current
;; buffer, it is never shrunk, but possibly expanded.  Finally, if the
;; variable c-macro-shrink-window-flag is nil the window size is *never*
;; changed.
(defun c-macro-display-buffer ()
  (goto-char (point-min))
  (c-mode)
  (let ((oldwinheight (window-height))
	(alreadythere			;the window was already there
	 (get-buffer-window (current-buffer)))
	(popped nil))			;the window popped changing the layout
    (or alreadythere
	(progn
	  (display-buffer (current-buffer) t)
	  (setq popped (/= oldwinheight (window-height)))))
    (if (and c-macro-shrink-window-flag	;user wants fancy shrinking :\)
	     (or alreadythere popped))
	;; Enlarge up to half screen, or shrink properly.
	(let ((oldwin (selected-window))
	      (minheight 0)
	      (maxheight 0))
	  (save-excursion
	    (select-window (get-buffer-window (current-buffer)))
	    (setq minheight (if alreadythere
				(window-height)
			      window-min-height))
	    (setq maxheight (/ (frame-height) 2))
	    (enlarge-window (- (min maxheight
				    (max minheight
					 (+ 2 (vertical-motion (point-max)))))
			       (window-height)))
	    (goto-char (point-min))
	    (select-window oldwin))))))


(defun c-macro-expansion (start end cppcommand &optional display)
  "Run a preprocessor on region and return the output as a string.
Expand the region between START and END in the current buffer using
the shell command CPPCOMMAND (e.g. \"/lib/cpp -C -DDEBUG\").
Be sure to use a -C (don't strip comments) or equivalent option.
Optional arg DISPLAY non-nil means show messages in the echo area."

;; Copy the current buffer's contents to a temporary hidden buffer.
;; Delete from END to end of buffer.  Insert a preprocessor #line
;; directive at START and after each #endif following START that are
;; not inside a comment or a string.  Put all the strings thus
;; inserted (without the "line" substring) in a list named linelist.
;; If START is inside a comment, prepend "*/" and append "/*" to the
;; #line directive.  If inside a string, prepend and append "\"".
;; Preprocess the buffer contents, then look for all the lines stored
;; in linelist starting from end of buffer.  The last line so found is
;; where START was, so return the substring from point to end of
;; buffer.
  (let ((inbuf (current-buffer))
	(outbuf (get-buffer-create " *C Macro Expansion*"))
	(filename (if (and buffer-file-name
			   (string-match (regexp-quote default-directory)
					 buffer-file-name))
		      (substring buffer-file-name (match-end 0))
		    (buffer-name)))
	(mymsg (format "Invoking %s%s%s on region..."
		       c-macro-preprocessor
		       (if (string= "" c-macro-cppflags) "" " ")
		       c-macro-cppflags))
	(uniquestring "??? !!! ??? start of c-macro expansion ??? !!! ???")
	(startlinenum 0)
	(linenum 0)
	(startstat ())
	(startmarker "")
	(exit-status 0)
	(tempname (make-temp-file
		   (expand-file-name "cmacexp"
				     (or small-temporary-file-directory
					 temporary-file-directory)))))
    (unwind-protect
	(save-excursion
	  (save-restriction
	    (widen)
            (let ((in-syntax-table (syntax-table)))
              (set-buffer outbuf)
              (setq buffer-read-only nil)
              (erase-buffer)
              (set-syntax-table in-syntax-table))
	    (insert-buffer-substring inbuf 1 end))

	  ;; We have copied inbuf to outbuf.  Point is at end of
	  ;; outbuf.  Inset a newline at the end, so cpp can correctly
	  ;; parse a token ending at END.
          (insert "\n")

	  ;; Save sexp status and line number at START.
	  (setq startstat (parse-partial-sexp 1 start))
	  (setq startlinenum (+ (count-lines 1 (point))
				(if (bolp) 1 0)))

	  ;; Now we insert the #line directives after all #endif or
	  ;; #else following START going backward, so the lines we
	  ;; insert don't change the line numbers.
	  ;(switch-to-buffer outbuf) (debug)	;debugging instructions
	  (goto-char (point-max))
	  (while (re-search-backward "\n#\\(endif\\|else\\)\\>" start 'move)
	    (if (equal (nthcdr 3 (parse-partial-sexp start (point)
						     nil nil startstat))
		       '(nil nil nil 0 nil)) ;neither in string nor in
					     ;comment nor after quote
		(progn
		  (goto-char (match-end 0))
		  (setq linenum (+ startlinenum
				   (count-lines start (point))))
		  (insert (format "\n#line %d \"%s\"\n" linenum filename))
		  (goto-char (match-beginning 0)))))

	  ;; Now we are at START.  Insert the first #line directive.
	  ;; This must work even inside a string or comment, or after a
	  ;; quote.
	  (let* ((startinstring (nth 3 startstat))
		 (startincomment (nth 4 startstat))
		 (startafterquote (nth 5 startstat))
		 (startinbcomment (nth 7 startstat)))
	    (insert (if startafterquote " " "")
		    (cond (startinstring
			   (char-to-string startinstring))
			  (startincomment "*/")
			  (""))
		    (setq startmarker
			  (concat "\n" uniquestring
				  (cond (startinstring
					 (char-to-string startinstring))
					(startincomment "/*")
					(startinbcomment "//"))
				  (if startafterquote "\\")))
		    (format "\n#line %d \"%s\"\n" startlinenum filename)))

	  ;; Call the preprocessor.
	  (if display (message "%s" mymsg))
	  (setq exit-status
		(call-process-region 1 (point-max)
				     shell-file-name
				     t (list t tempname) nil "-c"
				     cppcommand))
	  (if display (message "%s" (concat mymsg "done")))
	  (if (= (buffer-size) 0)
	      ;; Empty output is normal after a fatal error.
	      (insert "\nPreprocessor produced no output\n")
	    ;; Find and delete the mark of the start of the expansion.
	    ;; Look for `# nn "file.c"' lines and delete them.
	    (goto-char (point-min))
	    (search-forward startmarker)
	    (delete-region 1 (point)))
	  (while (re-search-forward (concat "^# [0-9]+ \""
					    (regexp-quote filename)
					    "\"") nil t)
	    (beginning-of-line)
	    (let ((beg (point)))
	      (forward-line 1)
	      (delete-region beg (point))))

	  ;; If CPP got errors, show them at the beginning.
	  ;; MS-DOS shells don't return the exit code of their children.
	  ;; Look at the size of the error message file instead, but
	  ;; don't punish those MS-DOS users who have a shell that does
	  ;; return an error code.
	  (or (and (or (not (boundp 'msdos-shells))
		       (not (member (file-name-nondirectory shell-file-name)
				    msdos-shells)))
		   (eq exit-status 0))
	      (zerop (nth 7 (file-attributes (expand-file-name tempname))))
	      (progn
		(goto-char (point-min))
		;; Put the messages inside a comment, so they won't get in
		;; the way of font-lock, highlighting etc.
		(insert
		 (format "/* Preprocessor terminated with status %s\n\n   Messages from `%s\':\n\n"
			 exit-status cppcommand))
		(goto-char (+ (point)
			      (nth 1 (insert-file-contents tempname))))
		(insert "\n\n*/\n")))
	  (delete-file tempname)

	  ;; Compute the return value, keeping in account the space
	  ;; inserted at the end of the buffer.
	  (buffer-substring 1 (max 1 (- (point-max) 1))))

      ;; Cleanup.
      (kill-buffer outbuf))))

;; arch-tag: 4f20253c-71ef-4e6d-a774-19087060910e
;;; cmacexp.el ends here