view lisp/vc-hg.el @ 107777:13c077500eb3

2010-04-04 John Wiegley <[e-mail]> * ido.el (ido-use-virtual-buffers): New variable to indicate whether "virtual buffer" support is enabled for IDO. Essentially it works as follows: Say you are visiting a file and the buffer gets cleaned up by mignight.el. Later, you want to switch to that buffer, but find it's no longer open. With virtual buffers enabled, the buffer name stays in the buffer list (using the ido-virtual face, and always at the end), and if you select it, it opens the file back up again. This allows you to think less about whether recently opened files are still open or not. Most of the time you can quit Emacs, restart, and then switch to a file buffer that was previously open as if it still were. NOTE: This feature has been present in iswitchb for several years now, and I'm porting the same logic to IDO. (ido-virtual): Face used to indicate virtual buffers in the list. (ido-buffer-internal): If a buffer is chosen, and no such buffer exists, but a virtual buffer of that name does (which would be why it was in the list), recreate the buffer by reopening the file. (ido-make-buffer-list): If virtual buffers are being used, call `ido-add-virtual-buffers-to-list' before the make list hook. (ido-virtual-buffers): New variable which contains a copy of the current contents of the `recentf-list', albeit pared down for the sake of speed, and with proper faces applied. (ido-add-virtual-buffers-to-list): Using the `recentf-list', create a list of "virtual buffers" to present to the user in addition to the currently open set. Note that this logic could get rather slow if that list is too large. With the default `recentf-max-saved-items' of 200, there is little speed penalty.

;;; vc-hg.el --- VC backend for the mercurial version control system

;; Copyright (C) 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.

;; Author: Ivan Kanis
;; Keywords: tools

;; This file is part of GNU Emacs.

;; GNU Emacs is free software: you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation, either version 3 of the License, or
;; (at your option) any later version.

;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.

;;; Commentary:

;; This is a mercurial version control backend

;;; Thanks:

;;; Bugs:

;;; Installation:

;;; Todo:

;; 1) Implement the rest of the vc interface. See the comment at the
;; beginning of vc.el. The current status is:

;; FUNCTION NAME                               STATUS
;; BACKEND PROPERTIES
;; * revision-granularity                      OK
;; STATE-QUERYING FUNCTIONS
;; * registered (file)                         OK
;; * state (file)                              OK
;; - state-heuristic (file)                    NOT NEEDED
;; - dir-status (dir update-function)          OK
;; - dir-status-files (dir files ds uf)        OK
;; - dir-extra-headers (dir)                   OK
;; - dir-printer (fileinfo)                    OK
;; * working-revision (file)                   OK
;; - latest-on-branch-p (file)                 ??
;; * checkout-model (files)                    OK
;; - workfile-unchanged-p (file)               OK
;; - mode-line-string (file)                   NOT NEEDED
;; STATE-CHANGING FUNCTIONS
;; * register (files &optional rev comment)    OK
;; * create-repo ()                            OK
;; - init-revision ()                          NOT NEEDED
;; - responsible-p (file)                      OK
;; - could-register (file)                     OK
;; - receive-file (file rev)                   ?? PROBABLY NOT NEEDED
;; - unregister (file)                         COMMENTED OUT, MAY BE INCORRECT
;; * checkin (files rev comment)               OK
;; * find-revision (file rev buffer)           OK
;; * checkout (file &optional editable rev)    OK
;; * revert (file &optional contents-done)     OK
;; - rollback (files)                          ?? PROBABLY NOT NEEDED
;; - merge (file rev1 rev2)                    NEEDED
;; - merge-news (file)                         NEEDED
;; - steal-lock (file &optional revision)      NOT NEEDED
;; HISTORY FUNCTIONS
;; * print-log (files buffer &optional shortlog start-revision limit) OK
;; - log-view-mode ()                          OK
;; - show-log-entry (revision)                 NOT NEEDED, DEFAULT IS GOOD
;; - comment-history (file)                    NOT NEEDED
;; - update-changelog (files)                  NOT NEEDED
;; * diff (files &optional rev1 rev2 buffer)   OK
;; - revision-completion-table (files)         OK?
;; - annotate-command (file buf &optional rev) OK
;; - annotate-time ()                          OK
;; - annotate-current-time ()                  NOT NEEDED
;; - annotate-extract-revision-at-line ()      OK
;; TAG SYSTEM
;; - create-tag (dir name branchp)             NEEDED
;; - retrieve-tag (dir name update)            NEEDED
;; MISCELLANEOUS
;; - make-version-backups-p (file)             ??
;; - repository-hostname (dirname)             ??
;; - previous-revision (file rev)              OK
;; - next-revision (file rev)                  OK
;; - check-headers ()                          ??
;; - clear-headers ()                          ??
;; - delete-file (file)                        TEST IT
;; - rename-file (old new)                     OK
;; - find-file-hook ()                         PROBABLY NOT NEEDED

;; 2) Implement Stefan Monnier's advice:
;; vc-hg-registered and vc-hg-state
;; Both of those functions should be super extra careful to fail gracefully in
;; unexpected circumstances. The reason this is important is that any error
;; there will prevent the user from even looking at the file :-(
;; Ideally, just like in vc-arch and vc-cvs, checking that the file is under
;; mercurial's control and extracting the current revision should be done
;; without even using `hg' (this way even if you don't have `hg' installed,
;; Emacs is able to tell you this file is under mercurial's control).

;;; History:
;;

;;; Code:

(eval-when-compile
  (require 'cl)
  (require 'vc)
  (require 'vc-dir))

;;; Customization options

(defcustom vc-hg-global-switches nil
  "Global switches to pass to any Hg command."
  :type '(choice (const :tag "None" nil)
         (string :tag "Argument String")
         (repeat :tag "Argument List" :value ("") string))
  :version "22.2"
  :group 'vc)

(defcustom vc-hg-diff-switches t ; Hg doesn't support common args like -u
  "String or list of strings specifying switches for Hg diff under VC.
If nil, use the value of `vc-diff-switches'.  If t, use no switches."
  :type '(choice (const :tag "Unspecified" nil)
                 (const :tag "None" t)
                 (string :tag "Argument String")
                 (repeat :tag "Argument List" :value ("") string))
  :version "23.1"
  :group 'vc)


;;; Properties of the backend

(defun vc-hg-revision-granularity () 'repository)
(defun vc-hg-checkout-model (files) 'implicit)

;;; State querying functions

;;;###autoload (defun vc-hg-registered (file)
;;;###autoload   "Return non-nil if FILE is registered with hg."
;;;###autoload   (if (vc-find-root file ".hg")       ; short cut
;;;###autoload       (progn
;;;###autoload         (load "vc-hg")
;;;###autoload         (vc-hg-registered file))))

;; Modeled after the similar function in vc-bzr.el
(defun vc-hg-registered (file)
  "Return non-nil if FILE is registered with hg."
  (when (vc-hg-root file)           ; short cut
    (let ((state (vc-hg-state file)))  ; expensive
      (and state (not (memq state '(ignored unregistered)))))))

(defun vc-hg-state (file)
  "Hg-specific version of `vc-state'."
  (let*
      ((status nil)
       (default-directory (file-name-directory file))
       (out
        (with-output-to-string
          (with-current-buffer
              standard-output
            (setq status
                  (condition-case nil
                      ;; Ignore all errors.
		      (let ((process-environment
			     ;; Avoid localization of messages so we can parse the output.
			     (append (list "TERM=dumb" "LANGUAGE=C" "HGRC=") process-environment)))

		      (process-file
                       "hg" nil t nil
                       "status" "-A" (file-relative-name file)))
                    ;; Some problem happened.  E.g. We can't find an `hg'
                    ;; executable.
                    (error nil)))))))
    (when (eq 0 status)
        (when (null (string-match ".*: No such file or directory$" out))
          (let ((state (aref out 0)))
            (cond
             ((eq state ?=) 'up-to-date)
             ((eq state ?A) 'added)
             ((eq state ?M) 'edited)
             ((eq state ?I) 'ignored)
             ((eq state ?R) 'removed)
             ((eq state ?!) 'missing)
             ((eq state ??) 'unregistered)
             ((eq state ?C) 'up-to-date) ;; Older mercurials use this
             (t 'up-to-date)))))))

(defun vc-hg-working-revision (file)
  "Hg-specific version of `vc-working-revision'."
  (let*
      ((status nil)
       (default-directory (file-name-directory file))
       (out
        (with-output-to-string
          (with-current-buffer
              standard-output
            (setq status
                  (condition-case nil
		      (let ((process-environment
			     ;; Avoid localization of messages so we can parse the output.
			     (append (list "TERM=dumb" "LANGUAGE=C" "HGRC=")
				     process-environment)))
			;; Ignore all errors.
			(process-file
			 "hg" nil t nil
			 "parent" "--template" "{rev}" (file-relative-name file)))
                    ;; Some problem happened.  E.g. We can't find an `hg'
                    ;; executable.
                    (error nil)))))))
    (when (eq 0 status) out)))

;;; History functions

(defcustom vc-hg-log-switches nil
  "String or list of strings specifying switches for hg log under VC."
  :type '(choice (const :tag "None" nil)
                 (string :tag "Argument String")
                 (repeat :tag "Argument List" :value ("") string))
  :group 'vc-hg)

(defun vc-hg-print-log (files buffer &optional shortlog start-revision limit)
  "Get change log associated with FILES."
  ;; `vc-do-command' creates the buffer, but we need it before running
  ;; the command.
  (vc-setup-buffer buffer)
  ;; If the buffer exists from a previous invocation it might be
  ;; read-only.
  (let ((inhibit-read-only t))
    (with-current-buffer
	buffer
      (apply 'vc-hg-command buffer 0 files "log"
	     (nconc
	      (when start-revision (list (format "-r%s:" start-revision)))
	      (when limit (list "-l" (format "%s" limit)))
	      (when shortlog (list "--style" "compact"))
	      vc-hg-log-switches)))))

(defvar log-view-message-re)
(defvar log-view-file-re)
(defvar log-view-font-lock-keywords)
(defvar log-view-per-file-logs)
(defvar vc-short-log)

(define-derived-mode vc-hg-log-view-mode log-view-mode "Hg-Log-View"
  (require 'add-log) ;; we need the add-log faces
  (set (make-local-variable 'log-view-file-re) "\\`a\\`")
  (set (make-local-variable 'log-view-per-file-logs) nil)
  (set (make-local-variable 'log-view-message-re)
       (if vc-short-log
           "^\\([0-9]+\\)\\(?:\\[.*\\]\\)? +\\([0-9a-z]\\{12\\}\\) +\\(\\(?:[0-9]+\\)-\\(?:[0-9]+\\)-\\(?:[0-9]+\\) \\(?:[0-9]+\\):\\(?:[0-9]+\\) \\(?:[-+0-9]+\\)\\) +\\(.*\\)$"
         "^changeset:[ \t]*\\([0-9]+\\):\\(.+\\)"))
  (set (make-local-variable 'log-view-font-lock-keywords)
       (if vc-short-log
           (append `((,log-view-message-re
                      (1 'log-view-message-face)
                      (2 'log-view-message-face)
                      (3 'change-log-date)
                      (4 'change-log-name))))
       (append
        log-view-font-lock-keywords
        '(
          ;; Handle the case:
          ;; user: FirstName LastName <foo@bar>
          ("^user:[ \t]+\\([^<(]+?\\)[ \t]*[(<]\\([A-Za-z0-9_.+-]+@[A-Za-z0-9_.-]+\\)[>)]"
           (1 'change-log-name)
           (2 'change-log-email))
          ;; Handle the cases:
          ;; user: foo@bar
          ;; and
          ;; user: foo
          ("^user:[ \t]+\\([A-Za-z0-9_.+-]+\\(?:@[A-Za-z0-9_.-]+\\)?\\)"
           (1 'change-log-email))
          ("^date: \\(.+\\)" (1 'change-log-date))
            ("^summary:[ \t]+\\(.+\\)" (1 'log-view-message)))))))

(declare-function log-edit-mode "log-edit" ())
(defvar log-edit-extra-flags)
(defvar log-edit-before-checkin-process)

(define-derived-mode vc-hg-log-edit-mode log-edit-mode "Hg-log-edit"
  "Mode for editing Hg commit logs.
If a line like:
Author: NAME
is present in the log, it is removed, and
--author NAME
is passed to the hg commit command."
  (set (make-local-variable 'log-edit-extra-flags) nil)
  (set (make-local-variable 'log-edit-before-checkin-process)
       '(("^Author:[ \t]+\\(.*\\)[ \t]*$" . (list "--user" (match-string 1))))))

(defun vc-hg-diff (files &optional oldvers newvers buffer)
  "Get a difference report using hg between two revisions of FILES."
  (let* ((firstfile (car files))
         (working (and firstfile (vc-working-revision firstfile))))
    (when (and (equal oldvers working) (not newvers))
      (setq oldvers nil))
    (when (and (not oldvers) newvers)
      (setq oldvers working))
    (apply #'vc-hg-command (or buffer "*vc-diff*") nil files "diff"
           (append
            (vc-switches 'hg 'diff)
            (when oldvers
              (if newvers
                  (list "-r" oldvers "-r" newvers)
                (list "-r" oldvers)))))))

(defun vc-hg-revision-table (files)
  (let ((default-directory (file-name-directory (car files))))
    (with-temp-buffer
      (vc-hg-command t nil files "log" "--template" "{rev} ")
      (split-string
       (buffer-substring-no-properties (point-min) (point-max))))))

;; Modeled after the similar function in vc-cvs.el
(defun vc-hg-revision-completion-table (files)
  (lexical-let ((files files)
                table)
    (setq table (lazy-completion-table
                 table (lambda () (vc-hg-revision-table files))))
    table))

(defun vc-hg-annotate-command (file buffer &optional revision)
  "Execute \"hg annotate\" on FILE, inserting the contents in BUFFER.
Optional arg REVISION is a revision to annotate from."
  (vc-hg-command buffer 0 file "annotate" "-d" "-n" "--follow"
                 (when revision (concat "-r" revision))))

(declare-function vc-annotate-convert-time "vc-annotate" (time))

;; The format for one line output by "hg annotate -d -n" looks like this:
;;215 Wed Jun 20 21:22:58 2007 -0700: CONTENTS
;; i.e: VERSION_NUMBER DATE: CONTENTS
;; If the user has set the "--follow" option, the output looks like:
;;215 Wed Jun 20 21:22:58 2007 -0700 foo.c: CONTENTS
;; i.e. VERSION_NUMBER DATE FILENAME: CONTENTS
(defconst vc-hg-annotate-re
  "^[ \t]*\\([0-9]+\\) \\(.\\{30\\}\\)\\(?:\\(: \\)\\|\\(?: +\\(.+\\): \\)\\)")

(defun vc-hg-annotate-time ()
  (when (looking-at vc-hg-annotate-re)
    (goto-char (match-end 0))
    (vc-annotate-convert-time
     (date-to-time (match-string-no-properties 2)))))

(defun vc-hg-annotate-extract-revision-at-line ()
  (save-excursion
    (beginning-of-line)
    (when (looking-at vc-hg-annotate-re)
      (if (match-beginning 3)
	  (match-string-no-properties 1)
	(cons (match-string-no-properties 1)
	      (expand-file-name (match-string-no-properties 4)))))))

(defun vc-hg-previous-revision (file rev)
  (let ((newrev (1- (string-to-number rev))))
    (when (>= newrev 0)
      (number-to-string newrev))))

(defun vc-hg-next-revision (file rev)
  (let ((newrev (1+ (string-to-number rev)))
        (tip-revision
         (with-temp-buffer
           (vc-hg-command t 0 nil "tip")
           (goto-char (point-min))
           (re-search-forward "^changeset:[ \t]*\\([0-9]+\\):")
           (string-to-number (match-string-no-properties 1)))))
    ;; We don't want to exceed the maximum possible revision number, ie
    ;; the tip revision.
    (when (<= newrev tip-revision)
      (number-to-string newrev))))

;; Modeled after the similar function in vc-bzr.el
(defun vc-hg-delete-file (file)
  "Delete FILE and delete it in the hg repository."
  (condition-case ()
      (delete-file file)
    (file-error nil))
  (vc-hg-command nil 0 file "remove" "--after" "--force"))

;; Modeled after the similar function in vc-bzr.el
(defun vc-hg-rename-file (old new)
  "Rename file from OLD to NEW using `hg mv'."
  (vc-hg-command nil 0 new "mv" old))

(defun vc-hg-register (files &optional rev comment)
  "Register FILES under hg.
REV is ignored.
COMMENT is ignored."
  (vc-hg-command nil 0 files "add"))

(defun vc-hg-create-repo ()
  "Create a new Mercurial repository."
  (vc-hg-command nil 0 nil "init"))

(defalias 'vc-hg-responsible-p 'vc-hg-root)

;; Modeled after the similar function in vc-bzr.el
(defun vc-hg-could-register (file)
  "Return non-nil if FILE could be registered under hg."
  (and (vc-hg-responsible-p file)      ; shortcut
       (condition-case ()
           (with-temp-buffer
             (vc-hg-command t nil file "add" "--dry-run"))
             ;; The command succeeds with no output if file is
             ;; registered.
         (error))))

;; FIXME: This would remove the file. Is that correct?
;; (defun vc-hg-unregister (file)
;;   "Unregister FILE from hg."
;;   (vc-hg-command nil nil file "remove"))

(defun vc-hg-checkin (files rev comment &optional extra-args)
  "Hg-specific version of `vc-backend-checkin'.
REV is ignored."
  (apply 'vc-hg-command nil 0 files
         (nconc (list "commit" "-m" comment) extra-args)))

(defun vc-hg-find-revision (file rev buffer)
  (let ((coding-system-for-read 'binary)
        (coding-system-for-write 'binary))
    (if rev
        (vc-hg-command buffer 0 file "cat" "-r" rev)
      (vc-hg-command buffer 0 file "cat"))))

;; Modeled after the similar function in vc-bzr.el
(defun vc-hg-checkout (file &optional editable rev)
  "Retrieve a revision of FILE.
EDITABLE is ignored.
REV is the revision to check out into WORKFILE."
  (let ((coding-system-for-read 'binary)
        (coding-system-for-write 'binary))
  (with-current-buffer (or (get-file-buffer file) (current-buffer))
    (if rev
        (vc-hg-command t 0 file "cat" "-r" rev)
      (vc-hg-command t 0 file "cat")))))

;; Modeled after the similar function in vc-bzr.el
(defun vc-hg-workfile-unchanged-p (file)
  (eq 'up-to-date (vc-hg-state file)))

;; Modeled after the similar function in vc-bzr.el
(defun vc-hg-revert (file &optional contents-done)
  (unless contents-done
    (with-temp-buffer (vc-hg-command t 0 file "revert"))))

;;; Hg specific functionality.

(defvar vc-hg-extra-menu-map
  (let ((map (make-sparse-keymap)))
    (define-key map [incoming] '(menu-item "Show incoming" vc-hg-incoming))
    (define-key map [outgoing] '(menu-item "Show outgoing" vc-hg-outgoing))
    map))

(defun vc-hg-extra-menu () vc-hg-extra-menu-map)

(defun vc-hg-extra-status-menu () vc-hg-extra-menu-map)

(defvar log-view-vc-backend)

(define-derived-mode vc-hg-outgoing-mode vc-hg-log-view-mode "Hg-Outgoing"
  "Mode for browsing Hg outgoing changes."
  (set (make-local-variable 'log-view-vc-backend) 'Hg))

(define-derived-mode vc-hg-incoming-mode vc-hg-log-view-mode "Hg-Incoming"
  "Mode for browsing Hg incoming changes."
  (set (make-local-variable 'log-view-vc-backend) 'Hg))

(defstruct (vc-hg-extra-fileinfo
            (:copier nil)
            (:constructor vc-hg-create-extra-fileinfo (rename-state extra-name))
            (:conc-name vc-hg-extra-fileinfo->))
  rename-state        ;; rename or copy state
  extra-name)         ;; original name for copies and rename targets, new name for

(declare-function vc-default-dir-printer "vc-dir" (backend fileentry))

(defun vc-hg-dir-printer (info)
  "Pretty-printer for the vc-dir-fileinfo structure."
  (let ((extra (vc-dir-fileinfo->extra info)))
    (vc-default-dir-printer 'Hg info)
    (when extra
      (insert (propertize
               (format "   (%s %s)"
                       (case (vc-hg-extra-fileinfo->rename-state extra)
                         ('copied "copied from")
                         ('renamed-from "renamed from")
                         ('renamed-to "renamed to"))
                       (vc-hg-extra-fileinfo->extra-name extra))
               'face 'font-lock-comment-face)))))

(defun vc-hg-after-dir-status (update-function)
  (let ((status-char nil)
        (file nil)
        (translation '((?= . up-to-date)
                       (?C . up-to-date)
                       (?A . added)
                       (?R . removed)
                       (?M . edited)
                       (?I . ignored)
                       (?! . missing)
                       (?  . copy-rename-line)
                       (?? . unregistered)))
        (translated nil)
        (result nil)
        (last-added nil)
        (last-line-copy nil))
      (goto-char (point-min))
      (while (not (eobp))
        (setq translated (cdr (assoc (char-after) translation)))
        (setq file
              (buffer-substring-no-properties (+ (point) 2)
                                              (line-end-position)))
        (cond ((not translated)
               (setq last-line-copy nil))
              ((eq translated 'up-to-date)
               (setq last-line-copy nil))
              ((eq translated 'copy-rename-line)
               ;; For copied files the output looks like this:
               ;; A COPIED_FILE_NAME
               ;;   ORIGINAL_FILE_NAME
               (setf (nth 2 last-added)
                     (vc-hg-create-extra-fileinfo 'copied file))
               (setq last-line-copy t))
              ((and last-line-copy (eq translated 'removed))
               ;; For renamed files the output looks like this:
               ;; A NEW_FILE_NAME
               ;;   ORIGINAL_FILE_NAME
               ;; R ORIGINAL_FILE_NAME
               ;; We need to adjust the previous entry to not think it is a copy.
               (setf (vc-hg-extra-fileinfo->rename-state (nth 2 last-added))
                     'renamed-from)
               (push (list file translated
                           (vc-hg-create-extra-fileinfo
                            'renamed-to (nth 0 last-added))) result)
               (setq last-line-copy nil))
              (t
               (setq last-added (list file translated nil))
               (push last-added result)
               (setq last-line-copy nil)))
        (forward-line))
      (funcall update-function result)))

(defun vc-hg-dir-status (dir update-function)
  (vc-hg-command (current-buffer) 'async dir "status" "-C")
  (vc-exec-after
   `(vc-hg-after-dir-status (quote ,update-function))))

(defun vc-hg-dir-status-files (dir files default-state update-function)
  (apply 'vc-hg-command (current-buffer) 'async dir "status" "-C" files)
  (vc-exec-after
   `(vc-hg-after-dir-status (quote ,update-function))))

(defun vc-hg-dir-extra-header (name &rest commands)
  (concat (propertize name 'face 'font-lock-type-face)
          (propertize
           (with-temp-buffer
             (apply 'vc-hg-command (current-buffer) 0 nil commands)
             (buffer-substring-no-properties (point-min) (1- (point-max))))
           'face 'font-lock-variable-name-face)))

(defun vc-hg-dir-extra-headers (dir)
  "Generate extra status headers for a Mercurial tree."
  (let ((default-directory dir))
    (concat
     (vc-hg-dir-extra-header "Root       : " "root") "\n"
     (vc-hg-dir-extra-header "Branch     : " "id" "-b") "\n"
     (vc-hg-dir-extra-header "Tags       : " "id" "-t") ; "\n"
     ;; these change after each commit
     ;; (vc-hg-dir-extra-header "Local num  : " "id" "-n") "\n"
     ;; (vc-hg-dir-extra-header "Global id  : " "id" "-i")
     )))

;; FIXME: this adds another top level menu, instead figure out how to
;; replace the Log-View menu.
(easy-menu-define log-view-mode-menu vc-hg-outgoing-mode-map
  "Hg-outgoing Display Menu"
  `("Hg-outgoing"
    ["Push selected"  vc-hg-push]))

(easy-menu-define log-view-mode-menu vc-hg-incoming-mode-map
  "Hg-incoming Display Menu"
  `("Hg-incoming"
    ["Pull selected"  vc-hg-pull]))

(defun vc-hg-outgoing ()
  (interactive)
  (let ((bname "*Hg outgoing*")
	(vc-short-log nil))
    (vc-hg-command bname 1 nil "outgoing" "-n")
    (pop-to-buffer bname)
    (vc-hg-outgoing-mode)))

(defun vc-hg-incoming ()
  (interactive)
  (let ((bname "*Hg incoming*")
	(vc-short-log nil))
    (vc-hg-command bname 0 nil "incoming" "-n")
    (pop-to-buffer bname)
    (vc-hg-incoming-mode)))

(declare-function log-view-get-marked "log-view" ())

;; XXX maybe also add key bindings for these functions.
(defun vc-hg-push ()
  (interactive)
  (let ((marked-list (log-view-get-marked)))
    (if marked-list
        (apply #'vc-hg-command
               nil 0 nil
               "push"
               (apply 'nconc
                      (mapcar (lambda (arg) (list "-r" arg)) marked-list)))
      (error "No log entries selected for push"))))

(defun vc-hg-pull ()
  (interactive)
  (let ((marked-list (log-view-get-marked)))
    (if marked-list
        (apply #'vc-hg-command
               nil 0 nil
               "pull"
               (apply 'nconc
                      (mapcar (lambda (arg) (list "-r" arg)) marked-list)))
      (error "No log entries selected for pull"))))

;;; Internal functions

(defun vc-hg-command (buffer okstatus file-or-list &rest flags)
  "A wrapper around `vc-do-command' for use in vc-hg.el.
The difference to vc-do-command is that this function always invokes `hg',
and that it passes `vc-hg-global-switches' to it before FLAGS."
  (apply 'vc-do-command (or buffer "*vc*") okstatus "hg" file-or-list
         (if (stringp vc-hg-global-switches)
             (cons vc-hg-global-switches flags)
           (append vc-hg-global-switches
                   flags))))

(defun vc-hg-root (file)
  (vc-find-root file ".hg"))

(provide 'vc-hg)

;; arch-tag: bd094dc5-715a-434f-a331-37b9fb7cd954
;;; vc-hg.el ends here