Mercurial > emacs
view oldXMenu/ChangeLog @ 107777:13c077500eb3
2010-04-04 John Wiegley <jwiegley@gmail.com>
* ido.el (ido-use-virtual-buffers): New variable to indicate
whether "virtual buffer" support is enabled for IDO. Essentially
it works as follows: Say you are visiting a file and the buffer
gets cleaned up by mignight.el. Later, you want to switch to that
buffer, but find it's no longer open. With virtual buffers
enabled, the buffer name stays in the buffer list (using the
ido-virtual face, and always at the end), and if you select it, it
opens the file back up again. This allows you to think less about
whether recently opened files are still open or not. Most of the
time you can quit Emacs, restart, and then switch to a file buffer
that was previously open as if it still were. NOTE: This feature
has been present in iswitchb for several years now, and I'm
porting the same logic to IDO.
(ido-virtual): Face used to indicate virtual buffers in the list.
(ido-buffer-internal): If a buffer is chosen, and no such buffer
exists, but a virtual buffer of that name does (which would be why
it was in the list), recreate the buffer by reopening the file.
(ido-make-buffer-list): If virtual buffers are being used, call
`ido-add-virtual-buffers-to-list' before the make list hook.
(ido-virtual-buffers): New variable which contains a copy of the
current contents of the `recentf-list', albeit pared down for the
sake of speed, and with proper faces applied.
(ido-add-virtual-buffers-to-list): Using the `recentf-list',
create a list of "virtual buffers" to present to the user in
addition to the currently open set. Note that this logic could
get rather slow if that list is too large. With the default
`recentf-max-saved-items' of 200, there is little speed penalty.
author | jwiegley@gmail.com |
---|---|
date | Sun, 04 Apr 2010 02:55:19 -0400 |
parents | b4d27afff1bf |
children | 3879f5eab4e9 |
line wrap: on
line source
2010-03-10 Chong Yidong <cyd@stupidchicken.com> * Branch for 23.2. 2009-06-21 Chong Yidong <cyd@stupidchicken.com> * Branch for 23.1. 2008-07-31 Dan Nicolaescu <dann@ics.uci.edu> * descrip.mms: * compile.com: Remove file. * Create.c: Remove VMS support. 2008-07-23 Dan Nicolaescu <dann@ics.uci.edu> * Makefile.in (ALL_CFLAGS): Remove reference to C_SWITCH_SITE. 2007-07-25 Glenn Morris <rgm@gnu.org> * Relicense all FSF files to GPLv3 or later. 2007-06-04 Ulrich Mueller <ulm@gentoo.org> (tiny change) * ChgPane.c, ChgSel.c: Quiet --with-x-toolkit=no compilation warnings: #include <config.h>. 2007-06-02 Chong Yidong <cyd@stupidchicken.com> * Version 22.1 released. 2007-05-30 Ulrich Mueller <ulm@gentoo.org> (tiny change) * XMakeAssoc.c (XMakeAssoc): Use malloc rather than xmalloc. 2007-02-27 Glenn Morris <rgm@gnu.org> * Imakefile: Remove unused file with no explicit legal info. * Makefile.in (distclean): Remove Makefile. 2007-02-25 Glenn Morris <rgm@gnu.org> * XCrAssoc.c, XDelAssoc.c, XDestAssoc.c, XLookAssoc.c: * XMakeAssoc.c: Remove license text in favour of including copyright.h, as was done in original X11 source. 2004-12-27 Jan Djärv <jan.h.d@swipnet.se> * Activate.c (XMenuActivate): Return XM_NO_SELECT if Escape or C-g was pressed. 2004-11-12 Jan Djärv <jan.h.d@swipnet.se> * XMenu.h (XMenuActivateSetWaitFunction): New function. * Activate.c (XMenuActivateSetWaitFunction): New function. (XMenuActivate): Call wait_func if set, before XNextEvent. 2002-04-22 Jan Djärv <jan.h.d@swipnet.se> * Activate.c: Add calls to GrabKeyboard to remove strange interactions with window managers that steal keypresses. Call ungrab_all instead of XtUngrabPointer. (XMenuActivate): Add call to XGrabKeyboard (XMenuActivate): Add call to XUngrabKeyboard 2001-10-20 Gerd Moellmann <gerd@gnu.org> * (Version 21.1 released.) 2001-10-05 Gerd Moellmann <gerd@gnu.org> * Branch for 21.1. 2000-07-21 Eli Zaretskii <eliz@is.elta.co.il> * Activate.c (XMenuActivate): Call help callback with two more arguments: the pane number and selection number. 2000-01-27 Gerd Moellmann <gerd@gnu.org> * Activate.c (XMenuActivate): Add parameter HELP_CALLBACK. Call help callback. * Post.c (XMenuPost): Pass null help callback to XMenuActivate. * AddSel.c (XMenuAddSelection): Add parameter HELP. * XMenu.h (XmSelect): Add member `help_string'. 1999-07-12 Richard Stallman <rms@gnu.org> * Version 20.4 released. 1998-08-19 Richard Stallman <rms@psilocin.ai.mit.edu> * Version 20.3 released. 1997-09-19 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> * Version 20.2 released. 1997-09-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> * Version 20.1 released. 1996-08-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> * Version 19.33 released. 1996-07-31 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> * Version 19.32 released. 1996-06-12 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> * Internal.c (_XMRefreshSelection): Check for type SEPARATOR. * InsSel.c (XMenuInsertSelection): Use SEPARATOR if nec. * AddSel.c (XMenuAddSelection): Use SEPARATOR if nec. * XMenu.h: New alternative SEPARATOR. 1996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu> * Version 19.31 released. 1995-11-24 Richard Stallman <rms@mole.gnu.ai.mit.edu> * Version 19.30 released. 1995-11-13 Richard Stallman <rms@mole.gnu.ai.mit.edu> * Makefile.in (ALL_CFLAGS): Add some -I options. * Activate.c, AddPane.c, AddSel.c, Create.c, InsPane.c, InsSel.c: * Internal.c, XCrAssoc.c, XMakeAssoc.c: Include config.h. 1995-06-19 Richard Stallman <rms@mole.gnu.ai.mit.edu> * Version 19.29 released. 1995-02-07 Richard Stallman <rms@pogo.gnu.ai.mit.edu> * Makefile.in (maintainer-clean): Renamed from realclean. 1994-10-25 Richard Stallman <rms@mole.gnu.ai.mit.edu> * Makefile.in (ALL_CFLAGS): Reorder the switches more rationally. 1994-10-24 Jim Wilson (wilson@chestnut.cygnus.com) * Makefile.in (ALL_CFLAGS): Add C_SWITCH_X_MACHINE. 1994-09-11 Richard Stallman <rms@mole.gnu.ai.mit.edu> * Version 19.27 released. 1994-09-07 Richard Stallman <rms@mole.gnu.ai.mit.edu> * Version 19.26 released. 1994-07-23 Richard Stallman <rms@mole.gnu.ai.mit.edu> * Error.c (XMenuError): Make `message' static. 1994-06-28 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Create.c (XAllocDisplayColor): New function. Use it throughout in place of XAllocNamedColor. 1994-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Version 19.25 released. 1994-05-23 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Version 19.24 released. 1994-05-17 Karl Heuer (kwzh@hal.gnu.ai.mit.edu) * Create.c (XMenuCreate): Declare `data' as char*. 1994-05-16 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Version 19.23 released. 1994-04-12 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Create.c (XMenuCreate): Declare `data' as unsigned char*. 1994-01-03 Richard Stallman (rms@mole.gnu.ai.mit.edu) * XMakeAssoc.c (XMakeAssoc): Use xmalloc. (_XIOErrorFunction): Decl deleted. 1993-11-27 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Version 19.22 released. 1993-11-26 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Activate.c (XMenuActivate): Call XSetWindowBackground and _XMRefreshPane. 1993-11-16 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Version 19.21 released. 1993-11-13 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile.in (libXMenu11.a): Tell make not to worry if ranlib fails. Tell user too, in case make doesn't pay attention. 1993-11-11 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Version 19.20 released. 1993-10-25 Brian J. Fox (bfox@albert.gnu.ai.mit.edu) * Makefile.in (ALL_CFLAGS): Add C_SWITCH_X_SYSTEM. 1993-09-27 Brian J. Fox (bfox@valhalla) * Makefile.in (CPP, LN_S, C_SWITCH_X_SITE, CC, CFLAGS): Allow `configure' to supply the values for these variables. 1993-09-26 Brian J. Fox (bfox@ai.mit.edu) * Makefile.in (VPATH, srcdir): Now that `configure' creates the Makefiles, do not append the current directory to the value of `srcdir' or `VPATH'. 1993-08-14 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Version 19.19 released. 1993-08-08 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Version 19.18 released. 1993-07-30 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Internal.c (_XMWinQueInit): Use explicit loop, not bzero. 1993-07-27 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile (ALL_CFLAGS): Use all 6 C_SWITCH_... vars. Among them, put the ..._SITE vars last. 1993-07-18 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * Version 19.17 released. 1993-07-07 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * Makefile.in: Write out the dependencies for the object files; otherwise, VPATH won't work. * Makefile.in: Re-arrange, to put `all' target at the top. 1993-07-06 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * Version 19.16 released. 1993-06-19 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * version 19.15 released. 1993-06-18 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * Makefile.in (ALL_CFLAGS): Always #define EMACS_BITMAP_FILES. This should make it work under any circumstances. * Makefile.in (mostlyclean): Use rm -f. 1993-06-17 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * Version 19.14 released. 1993-06-17 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile.in (ALL_CFLAGS): Include C_SWITCH_MACHINE, and CPPFLAGS. Put CFLAGS last. 1993-06-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) Bring mumbleclean targets into conformance with GNU coding standards. * Makefile.in (mostlyclean, realclean): New targets. 1993-06-08 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * Version 19.13 released. 1993-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Version 19.10 released. 1993-05-29 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Create.c: Handle EMACS_BITMAP_FILES. Use new names of renamed bitmap files. 1993-05-28 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * AddPane.c, AddSel.c, DelPane.c, DelSel.c, InsPane.c, InsSel.c, XDelAssoc.c, XMakeAssoc.c, XMenu.h, insque.c: Changed all uses of insque and remque to emacs_insque and emacs_remque, so we can safely include insque.c in the library on all systems. 1993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * Makefile.in (.c.o): Use $< instead of ${srcdir}/$*.c; the latter only works with GNU Make. 1993-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Create.c (XMenuCreate): Use classes PaneFont and SelectionFont. 1993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * Version 19.9 released. 1993-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Create.c (XMenuCreate): Use x_get_resource_string, not XGetDefault. 1993-05-24 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * Version 19.8 released. 1993-05-23 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * Makefile.in (C_SWITCH_X_SITE): New variable, so that the configuration process can correctly implement the --x-includes option. 1993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * Create.c (XMenuCreate): Initialize the menu's pixmaps to None, not NULL. 1993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * Version 19.7 released. 1993-05-15 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * Makefile.in: Renamed from Makefile, so that the top-level makefile can edit it. 1993-04-13 Jim Blandy (jimb@totoro.cs.oberlin.edu) * XLookAssoc.c, XMakeAssoc.c: VMS needs <X11/Xresource.h>, not <X11/Xos.h>. * XCrAssoc.c: #include <errno.h>, not "errno.h". (XCreateAssocTable): Doc fix. 1993-03-24 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * Makefile (.c.o): Include C_SWITCH_SITE and C_SWITCH_SYSTEM in the options to the C compiler. * compile.com, descrip.mms: New files for VMS from Richard Levitte. * XCrAssoc.c, XLookAssoc.c, XDestAssoc.c, XDelAssoc.c: Use <angle brackets> around the names of the X Windows #include files; VMS needs this. * XLookAssoc.c, XMakeAssoc.c: #include <X11/Xos.h>. VMS needs this. * Create.c: On VMS, we have to look for the bitmap files in `./src/bitmaps', not <X11/bitmaps>. 1993-03-14 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile (.c.o): Don't rm the .o files. 1993-03-13 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Activate.c (XMenuActivate): If `active' field is negative, don't allow selecting a string. 1993-03-09 Jim Blandy (jimb@totoro.cs.oberlin.edu) * Create.c (XMenuCreate): New variable `root', holding the display's default root window, so we don't have to write out "RootWindow (display, DefaultScreen (display))" a jillion times. * Create.c (XMenuCreate): Don't assume that all the <X11/bitmaps/foo> patterns are 16x16. Instead of building a bitmap and then converting it to a pixmap of the appropriate depth if necessary, build a pixmap of the appropriate depth directly, using XCreatePixmapFromBitmapData. * Imakefile: Include XCrAssoc.c, XDelAssoc.c, XDestAssoc.c, XLookAssoc.c, and XMakeAssoc.c in SRCS. Similarly for OBJS. * XMenuInt.h: #include <stdio.h> before <X11/Xlib.h>, to avoid warnings about redefining NULL. * XMakeAssoc.c, XLookAssoc.c, XDestAssoc.c, XDelAssoc.c, XCrAssoc.c: #include X11/Xlib.h instead of X11/Xlibint.h. * XMakeAssoc.c, XLookAssoc.c, XCrAssoc.c: If NULL isn't defined by any of the `.h' files, define it. * XMakeAssoc.c, XCrAssoc.c: #include <errno.h>. Add an extern declaration for errno. * XMakeAssoc.c: Add an extern declaration for _XIOErrorFunction. (XMakeAssoc): Use malloc instead of Xmalloc to allocate new parts of the assoc table. * XCrAssoc.c (XCreateAssocTable): Same. * XDestAssoc.c (XDestroyAssocTable): Use free instead of Xfree. * XDelAssoc.c (XDeleteAssoc): Same. 1992-10-18 Richard Stallman (rms@mole.gnu.ai.mit.edu) * XMakeAssoc.c (XMakeAssoc): Use malloc, not Xmalloc. * XCrAssoc.c (XCreateAssocTable): Use malloc and calloc directly. * XDelAssoc.c (XDeleteAssoc): Use free, not Xfree. * XDestAssoc.c (XDestroyAssocTable): Likewise. 1992-10-17 Richard Stallman (rms@mole.gnu.ai.mit.edu) * XDelAssoc.c, XLookAssoc.c, XCrAssoc.c, XDestAssoc.c, XMakeAssoc.c: Use Xlib.h, not Xlibint.h. * XLookAssoc.c, XMakeAssoc.c, XCrAssoc.c (NULL): Defined. * XMakeAssoc.c, XCrAssoc.c: Include errno.h. Declare errno. * XMakeAssoc.c (_XIOErrorFunction): Declared. 1992-09-19 Richard Stallman (rms@mole.gnu.ai.mit.edu) * XDelAssoc.c, XLookAssoc.c, XCrAssoc.c, XDestAssoc.c, XMakeAssoc.c: Specify dir X11/ when including Xlibint.h. 1992-09-17 Richard Stallman (rms@mole.gnu.ai.mit.edu) * XDelAssoc.c, XLookAssoc.c, XCrAssoc.c, XDestAssoc.c, XMakeAssoc.c: New files. * Makefile (SRCS, OBJS): Compile those files. 1992-01-31 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile (clean): Delete object files and library. (distclean): New target. 1992-01-29 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile (libXMenu11.a): Put `-' on ranlib line. 1992-01-27 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile (EXTRA): New variable. (libXMenu11.a): Use that. * insque.c: New file. 1992-01-26 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile (CC): Assignment commented out. 1991-11-16 Noah Friedman (friedman@nutrimat) * copyright.h: New file (copied from X11R4 distribution) * All files: Replaced occurrences of #include <X11/copyright.h> with #include "copyright.h" 1991-10-25 Richard Stallman (rms@mole.gnu.ai.mit.edu) * XMenu.h (enum _xmmode): Remove spurious comma. * X10.h: New file. * XMenu.h, XMenuInt.h: Include X10.h from this dir. 1990-11-13 Richard Stallman (rms@mole.ai.mit.edu) * XMenu.h (struct _xmenu): Use unsigned long for colors. 1990-11-12 Richard Stallman (rms@mole.ai.mit.edu) * Internal.c: Declare argument `display' in some functions. ;; Local Variables: ;; coding: utf-8 ;; add-log-time-zone-rule: t ;; End: Copyright (C) 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc. This file is part of GNU Emacs. GNU Emacs is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. GNU Emacs is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>. ;;; arch-tag: 8b17c869-6677-40ce-be86-e62cf34061cf