Mercurial > emacs

;; allout.el - An extensive outline-mode for Emacs.
;; Copyright (C) 1992, 1993, 1994 Free Software Foundation, Inc.

;; Author: Ken Manheimer <klm@nist.gov>
;; Maintainer: Ken Manheimer <klm@nist.gov>
;; Created: Dec 1991 - first release to usenet
;; Version: $Id: allout.el,v 3.39 1994/03/05 17:39:51 klm Exp klm $||
;; Keywords: outline mode

;; This file is part of GNU Emacs.

;; GNU Emacs is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 2, or (at your option)
;; any later version.

;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs; see the file COPYING.  If not, write to
;; the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.

;;; Note - the lines beginning with ';;;_' are outline topic headers.
;;;        Load this file (or 'eval-current-buffer') and revisit the
;;;        file to give it a whirl.

;;;_* Provide
(provide 'outline)

;;;_ + LCD Archive Entry

;;;_ + Description
;; A full-fledged outline mode, based on the original rudimentary
;; GNU emacs outline functionality.
;;
;;Ken Manheimer	      				   301 975-3539
;;ken.manheimer@nist.gov			   FAX: 301 963-9137
;;
;;Computer Systems and Communications Division
;;
;;		Nat'l Institute of Standards and Technology
;;		Technology A151
;;		Gaithersburg, MD 20899

;;;_* User Customization variables

;;;_ + Topic Header configuration

;;;_  = outline-header-prefix
(defvar outline-header-prefix "."
  "*Outline topic header lines are identified by a leading topic
header prefix, which mostly have the value of this var at their front.
\(Level 1 topics are exceptions.  They consist of only a single
character, which is typically set to the outline-primary-bullet.")
(make-variable-buffer-local 'outline-header-prefix)

;;;_  = outline-mode-leaders
(defvar outline-mode-leaders
  '((emacs-lisp-mode . "\;\;\;_")
    (lisp-mode . "\;\;\;_")
    (awk-mode . "#")
    (csh-mode . "#")
    (sh-mode . "#")
    (tcl-mode . "#")
    (perl-mode . "#")
    (c++-mode "//_")
    (c-mode "/*_"))
  "Respective outline-prefix leading strings per major modes.  The
strings should begin with a comment string for the mode.  Preferably,
they would have an extra character, eg an \"_\" underscore, to
distinguish the lead string from regular comments that start at bol.
\'#'-commented script modes, however, may need to use a bar \'#' in
order for the script magic number \'#!' to serve as the top-level
topic.")

;;;_  = outline-primary-bullet
(defvar outline-primary-bullet "*"
  "Outline topic header lines are identified by a leading topic header
prefix, which is concluded by bullets that includes the value of this
var and the respective outline-*-bullets-string vars.

The value of an asterisk ('*') provides for backwards compatability
with the original emacs outline mode.  See outline-plain-bullets-string
and outline-distinctive-bullets-string for the range of available
bullets.")
(make-variable-buffer-local 'outline-primary-bullet)

;;;_  = outline-plain-bullets-string
(defvar outline-plain-bullets-string (concat outline-primary-bullet
					     "+-:.;,")
  "*The bullets normally used in outline topic prefixes.  See
'outline-distinctive-bullets-string' for the other kind of
bullets.

DO NOT include the close-square-bracket, ']', as a bullet.

Outline mode has to be reactivated in order for changes to the value
of this var to take effect.")
(make-variable-buffer-local 'outline-plain-bullets-string)

;;;_  = outline-distinctive-bullets-string
(defvar outline-distinctive-bullets-string "=>([{}&!?#%\"X@$~\\"
  "*The bullets used for distinguishing outline topics.  These
bullets are not offered among the regular rotation, and are not
changed when automatically rebulleting, as when shifting the
level of a topic.  See 'outline-plain-bullets-string' for the
other kind of bullets.

DO NOT include the close-square-bracket, ']', among any bullets.

You must run 'set-outline-regexp' in order for changes
to the value of this var to effect outline-mode operation.")
(make-variable-buffer-local 'outline-distinctive-bullets-string)

;;;_  = outline-old-style-prefixes
(defvar outline-old-style-prefixes nil
  "*Non-nil restricts the topic creation and modification
functions to asterix-padded prefixes, so they look exactly
like the original emacs-outline style prefixes.

Whatever the setting of this variable, both old and new style prefixes
are always respected by the topic maneuvering functions.")
(make-variable-buffer-local 'outline-old-style-prefixes)

;;;_  = outline-stylish-prefixes - new fangled topic prefixes
(defvar outline-stylish-prefixes t
  "*Non-nil allows the topic creation and modification
functions to vary the topic bullet char (the char that marks
the topic depth) just preceding the start of the topic text)
according to level.  Otherwise, only asterisks ('*') and
distinctive bullets are used.

This is how an outline can look with stylish prefixes:

    * Top level
    .* A topic
    . + One level 3 subtopic
    .  . One level 4 subtopic
    . + Another level 3 subtopic
    .  . A level 4 subtopic
    .  #2 A distinguished, numbered level 4 subtopic
    .  ! A distinguished ('!') level 4 subtopic
    .  #4 Another numbered level 4 subtopic

    This would be an outline with stylish prefixes inhibited:

    * Top level
    .* A topic
    .! A distinctive (but measly) subtopic
    . * A sub-subtopic - no bullets from outline-plain-bullets-string but '*'

Stylish and constant prefixes (as well as old-style prefixes) are
always respected by the topic maneuvering functions, regardless of
this variable setting.

The setting of this var is not relevant when outline-old-style-prefixes
is non-nil.")
(make-variable-buffer-local 'outline-stylish-prefixes)

;;;_  = outline-numbered-bullet
(defvar outline-numbered-bullet "#"
  "*Topics having this bullet have automatic maintainence of a sibling
sequence number tacked on just after the bullet.  Conventionally set
to \"#\", you can set it to a bullet of your choice.  A nil value
disables numbering maintainence.")
(make-variable-buffer-local 'outline-numbered-bullet)

;;;_  = outline-file-xref-bullet
(defvar outline-file-xref-bullet "@"
  "*Set this var to the bullet you want to use for file cross-references.
Set it 'nil' if you want to inhibit this capability.")

;;;_ + LaTeX formatting
;;;_  - outline-number-pages
(defvar outline-number-pages nil
  "*Non-nil turns on page numbering for LaTeX formatting of an outline.")
;;;_  - outline-label-style
(defvar outline-label-style "\\large\\bf"
  "*Font and size of labels for LaTeX formatting of an outline.")
;;;_  - outline-head-line-style
(defvar outline-head-line-style "\\large\\sl "
  "*Font and size of entries for LaTeX formatting of an outline.")
;;;_  - outline-body-line-style
(defvar outline-body-line-style " "
  "*Font and size of entries for LaTeX formatting of an outline.")
;;;_  - outline-title-style
(defvar outline-title-style "\\Large\\bf"
  "*Font and size of titles for LaTeX formatting of an outline.")
;;;_  - outline-title
(defvar outline-title '(or buffer-file-name (current-buffer-name))
  "*Expression to be evaluated to determine the title for LaTeX
formatted copy.")
;;;_  - outline-line-skip
(defvar outline-line-skip ".05cm"
  "*Space between lines for LaTeX formatting of an outline.")
;;;_  - outline-indent
(defvar outline-indent ".3cm"
  "*LaTeX formatted depth-indent spacing.")

;;;_ + Miscellaneous customization

;;;_  = outline-keybindings-list
;;; You have to reactivate outline-mode - '(outline-mode t)' - to
;;; institute changes to this var.
(defvar outline-keybindings-list ()
  "*List of outline-mode key / function bindings, they will be locally
bound on the outline-mode-map.  The keys will be prefixed by
outline-command-prefix unless the cell contains a third, no-nil
element, in which case the initial string will be used as is.")
(setq outline-keybindings-list
      '(
                                        ; Motion commands:
        ("?t" outline-latexify-exposed)
        ("\C-n" outline-next-visible-heading)
        ("\C-p" outline-previous-visible-heading)
        ("\C-u" outline-up-current-level)
        ("\C-f" outline-forward-current-level)
        ("\C-b" outline-backward-current-level)
        ("\C-a" outline-beginning-of-current-entry)
        ("\C-e" outline-end-of-current-entry)
	;;("\C-n" outline-next-line-or-topic)
	;;("\C-p" outline-previous-line-or-topic)
                                        ; Exposure commands:
        ("\C-i" outline-show-children)
        ("\C-s" outline-show-current-subtree)
        ("\C-h" outline-hide-current-subtree)
        ("\C-o" outline-show-current-entry)
        ("!" outline-show-all)
                                        ; Alteration commands:
        (" " outline-open-sibtopic)
        ("." outline-open-subtopic)
        ("," outline-open-supertopic)
        ("'" outline-shift-in)
        (">" outline-shift-in)
        ("<" outline-shift-out)
        ("\C-m" outline-rebullet-topic)
        ("b" outline-rebullet-current-heading)
        ("#" outline-number-siblings)
        ("\C-k" outline-kill-line t)
        ("\C-y" outline-yank t)
        ("\M-y" outline-yank-pop t)
        ("\C-k" outline-kill-topic)
                                        ; Miscellaneous commands:
	("\C-@" outline-mark-topic)
        ("@" outline-resolve-xref)
        ("?c" outline-copy-exposed)))

;;;_  = outline-command-prefix
(defvar outline-command-prefix "\C-c"
  "*Key sequence to be used as prefix for outline mode command key bindings.")

;;;_  = outline-enwrap-isearch-mode - any non-nil value fine in Emacs 19.
(defvar outline-enwrap-isearch-mode "isearch-mode.el"
  "*Set this var non-nil if you're using Emacs 19 or Lucid emacs, or
you're using Dan LaLiberte's 'isearch-mode' stuff.  (If you have
LaLiberte's package available but its' typically loaded, set the
var to the name of the text, not the byte-compiled, load file.)

The new isearch is required if you want isearches to expose hidden
stuff encountered in the course of a search, and to reconceal it if
you go past.

Set the var nil if you're not using emacs 19 and you don't have the
elisp-archive package, or if want to disable this feature.")

;;;_  = outline-use-hanging-indents
(defvar outline-use-hanging-indents t
  "*When non-nil, the default auto-indent for text of topic bodies is
set to be even with the leading text of the header.  Ie, it is
indented to be just past the header prefix.  This is relevant mostly
for use with indented-text-mode, or other situations where auto-fill
occurs.

[This feature no longer depends in any way on the 'filladapt.el'
lisp-archive package.]")
(make-variable-buffer-local 'outline-use-hanging-indents)

;;;_  = outline-reindent-bodies
(defvar outline-reindent-bodies outline-use-hanging-indents
  "*Set this var non-nil if you want topic depth adjustments to
reindent hanging bodies so they remain even with the beginning
of heading text.")
(make-variable-buffer-local 'outline-reindent-bodies)

;;;_  = outline-sticky-header-motion
(defvar outline-sticky-header-motion t
  "*Non-nil means that outline-{next,previous}-line or topic, bound
to keys typically dedicated to {next,previous}-line, will move by
topics when the cursor is moving from the first character of topic-
header text.  You can always move the cursor off of that first-char
\"hot spot\" when you want to do regular next/previous line motions.")
(make-variable-buffer-local 'outline-sticky-header-motion)

;;;_  = outline-inhibit-protection
(defvar outline-inhibit-protection nil
  "*Outline mode uses emacs change-triggered functions (not available
before emacs 19) to detect unruly changes to concealed regions.  Set
this var non-nil to disable the protection, potentially increasing
text-entry responsiveness a bit.

The effect of this var occurs at outline-mode activation, so you may
have to deactivate and then reactivate if you want to toggle the
behavior.")

;;;_* Code - no user customizations below.

;;;_ #1 Outline Format, Internal Configuration, and Mode Activation
;;;_  - Topic header format
;;;_   = outline-regexp
(defvar outline-regexp ""
  "*Regular expression to match the beginning of a heading line.
Any line whose beginning matches this regexp is considered a
heading.  This var is set according to the user configuration vars
by set-outline-regexp.")
(make-variable-buffer-local 'outline-regexp)
;;;_   = outline-bullets-string
(defvar outline-bullets-string ""
  "A string dictating the valid set of outline topic bullets.  This
var should *not* be set by the user - it is set by 'set-outline-regexp',
and is composed from the elements of 'outline-plain-bullets-string'
and 'outline-distinctive-bullets-string'.")
(make-variable-buffer-local 'outline-bullets-string)
;;;_   = outline-bullets-string-len
(defvar outline-bullets-string-len 0
  "Length of current buffers' outline-plain-bullets-string.")
(make-variable-buffer-local 'outline-bullets-string-len)
;;;_   = outline-line-boundary-regexp
(defvar outline-line-boundary-regexp ()
  "outline-regexp with outline-style beginning of line anchor (ie,
C-j, *or* C-m, for prefixes of hidden topics).  This is properly
set when outline-regexp is produced by 'set-outline-regexp', so
that (match-beginning 2) and (match-end 2) delimit the prefix.")
(make-variable-buffer-local 'outline-line-boundary-regexp)
;;;_   = outline-bob-regexp
(defvar outline-bob-regexp ()
  "Like outline-line-boundary-regexp, this is an outline-regexp for
outline headers at the beginning of the buffer.  (match-beginning 2)
and (match-end 2) delimit the prefix.")
(make-variable-buffer-local 'outline-bob-regexp)
;;;_   = current-bullet
(defvar current-bullet nil
  "Variable local to outline-rebullet-heading,but referenced by
outline-make-topic-prefix, also.  Should be resolved with explicitly
parameterized communication between the two, if suitable.")
;;;_   = outline-header-subtraction
(defvar outline-header-subtraction (1- (length outline-header-prefix))
  "Length of outline-header prefix to subtract when computing depth
from prefix length.")
(make-variable-buffer-local 'outline-header-subtraction)
;;;_   = outline-plain-bullets-string-len
(defvar outline-plain-bullets-string-len (length outline-plain-bullets-string)
  "Length of outline-plain-bullets-string, updated by set-outline-regexp.")
(make-variable-buffer-local 'outline-plain-bullets-string-len)


;;;_   > outline-reset-header-lead (header-lead)
(defun outline-reset-header-lead (header-lead)
  "*Reset the leading string used to identify topic headers."
  (interactive "sNew lead string: ")
  (setq outline-header-prefix header-lead)
  (setq outline-header-subtraction (1- (length outline-header-prefix)))
  (set-outline-regexp))
;;;_   > outline-lead-with-comment-string (header-lead)
(defun outline-lead-with-comment-string (&optional header-lead)
  "*Set the topic-header leading string to specified string.  Useful
when for encapsulating outline structure in programming language
comments.  Returns the leading string."

  (interactive "P")
  (if (not (stringp header-lead))
      (setq header-lead (read-string
                         "String prefix for topic headers: ")))
  (setq outline-reindent-bodies nil)
  (outline-reset-header-lead header-lead)
  header-lead)
;;;_   > set-outline-regexp ()
(defun set-outline-regexp ()
  "Generate proper topic-header regexp form for outline functions, from
outline-plain-bullets-string and outline-distinctive-bullets-string."

  (interactive)
  ;; Derive outline-bullets-string from user configured components:
  (setq outline-bullets-string "")
  (let ((strings (list 'outline-plain-bullets-string
                       'outline-distinctive-bullets-string))
        cur-string
        cur-len
        cur-char
        cur-char-string
        index
        new-string)
    (while strings
      (setq new-string "") (setq index 0)
      (setq cur-len (length (setq cur-string (symbol-value (car strings)))))
      (while (< index cur-len)
        (setq cur-char (aref cur-string index))
        (setq outline-bullets-string
              (concat outline-bullets-string
                      (cond
                                        ; Single dash would denote a
                                        ; sequence, repeated denotes
                                        ; a dash:
                       ((eq cur-char ?-) "--")
                                        ; literal close-square-bracket
                                        ; doesn't work right in the
                                        ; expr, exclude it:
                       ((eq cur-char ?\]) "")
                       (t (regexp-quote  (char-to-string cur-char))))))
        (setq index (1+ index)))
      (setq strings (cdr strings)))
    )
  ;; Derive next for repeated use in outline-pending-bullet:
  (setq outline-plain-bullets-string-len (length outline-plain-bullets-string))
  (setq outline-header-subtraction (1- (length outline-header-prefix)))
  ;; Produce the new outline-regexp:
  (setq outline-regexp (concat "\\(\\"
                               outline-header-prefix
                               "[ \t]*["
                               outline-bullets-string
                               "]\\)\\|\\"
                               outline-primary-bullet
                               "+\\|\^l"))
  (setq outline-line-boundary-regexp
        (concat "\\([\n\r]\\)\\(" outline-regexp "\\)"))
  (setq outline-bob-regexp
        (concat "\\(\\`\\)\\(" outline-regexp "\\)"))
  )
;;;_  - Key bindings
;;;_   = outline-prior-bindings
(defvar outline-prior-bindings nil
  "Variable for use in V18, with outline-added-bindings, for
resurrecting, on mode deactivation, bindings that existed before
activation.")
;;;_   = outline-added-bindings
(defvar outline-added-bindings nil
  "Variable for use in V18, with outline-prior-bindings, for
resurrecting, on mode deactivation, bindings that existed before
activation.")
;;;_  - Mode-Specific Variable Maintenance Utilities
;;;_   = outline-mode-prior-settings
(defvar outline-mode-prior-settings nil
  "For internal use by outline mode, registers settings to be resumed
on mode deactivation.")
(make-variable-buffer-local 'outline-mode-prior-settings)
;;;_   > outline-resumptions (name &optional value)
(defun outline-resumptions (name &optional value)

  "Registers information for later reference, or performs resumption of
outline-mode specific values.  First arg is NAME of variable affected.
optional second arg is list containing outline-mode-specific VALUE to
be imposed on named variable, and to be registered.  (It's a list so you
can specify registrations of null values.)  If no value is specified,
the registered value is returned (encapsulated in the list, so the
caller can distinguish nil vs no value), and the registration is popped
from the list."

  (let ((on-list (assq name outline-mode-prior-settings))
        prior-capsule                   ; By 'capsule' i mean a list
                                        ; containing a value, so we can
                                        ; distinguish nil from no value.
        )

    (if value

        ;; Registering:
        (progn
          (if on-list
              nil 	; Already preserved prior value - don't mess with it.
            ;; Register the old value, or nil if previously unbound:
            (setq outline-mode-prior-settings
                  (cons (list name
                              (if (boundp name) (list (symbol-value name))))
                        outline-mode-prior-settings)))
                                        ; And impose the new value, locally:
	  (progn (make-local-variable name)
		 (set name (car value))))

      ;; Relinquishing:
      (if (not on-list)

          ;; Oops, not registered - leave it be:
          nil

        ;; Some registration:
                                        ; reestablish it:
        (setq prior-capsule (car (cdr on-list)))
        (if prior-capsule
            (set name (car prior-capsule)) ; Some prior value - reestablish it.
          (makunbound name))		; Previously unbound - demolish var.
                                        ; Remove registration:
        (let (rebuild)
          (while outline-mode-prior-settings
            (if (not (eq (car outline-mode-prior-settings)
                         on-list))
                (setq rebuild
                      (cons (car outline-mode-prior-settings)
                            rebuild)))
            (setq outline-mode-prior-settings
                  (cdr outline-mode-prior-settings)))
          (setq outline-mode-prior-settings rebuild)))))
  )
;;;_  - Version
;;;_   = outline-version
(defvar outline-version
  (let ((rcs-rev "$Revision: 3.39 $"))
    (condition-case err
	(save-match-data
	  (string-match "\\$Revision: \\([0-9]+\\.[0-9]+\\)" rcs-rev)
	  (substring rcs-rev (match-beginning 1) (match-end 1)))
      (error rcs-rev)))
  "Revision number of currently loaded outline package.  (Currently
specific to allout.el.)")
;;;_   > outline-version
(defun outline-version (&optional here)
  "Return string describing the loaded outline version."
  (interactive "P")
  (let ((msg (concat "Allout Outline Mode v " outline-version)))
    (if here (insert-string msg))
    (message "%s" msg)
    msg))

;;;_  - Mode activation
;;;_   = outline-mode
(defvar outline-mode () "Allout outline mode minor-mode flag.")
(make-variable-buffer-local 'outline-mode)
;;;_   = outline-mode-map
(defvar outline-mode-map nil "Keybindings for (allout) outline minor mode.")
;;;_   > outline-mode-p ()
(defmacro outline-mode-p ()
   '(and (boundp 'outline-mode) outline-mode))

;;;_   = outline-during-write-cue nil
(defvar outline-during-write-cue nil
  "Indication, for outline-post-command-business, that we are in the
process of writing a file, and need to inhibit change protection.  See
also, outline-write-file-hook, outline-before-change-protect,
outline-post-command-business functions.")

;;;_   > outline-write-file-hook ()
(defun outline-write-file-hook ()
  "In outline mode, run as a local-write-file-hooks activity.
Currently just sets 'outline-during-write-cue', so outline-change-
protection knows to keep inactive during file write."
  (setq outline-during-write-cue t)
  nil)

;;;_   = outline-override-protect nil
(defvar outline-override-protect nil
  "In emacs v19 &c, outline-allout mode regulates alteration of concealed text
so it's affected as a unit, or not at all.  This is for use by competant
(eg, native outline) functions to temporarily override that protection.  It's
automatically reset to nil after every buffer modification.")
(make-variable-buffer-local 'outline-override-protect)
;;;_   > outline-unprotected (expr)
(defmacro outline-unprotected (expr)
  "Evaluate EXPRESSION with outline-override-protect
let-bound 't'."
  (` (let ((outline-override-protect t))
       (, expr))))
;;;_   = outline-undo-aggregation
(defvar outline-undo-aggregation 30
  "Amount of successive self-insert actions to bunch together per undo.
This is purely a kludge variable, regulating the compensation for a bug in
the way that before-change-function and undo interact.")
(make-variable-buffer-local 'outline-undo-aggregation)

;;;_   > produce-outline-mode-map (keymap-alist &optional base-map)
(defun produce-outline-mode-map (keymap-list &optional base-map)
  "Produce keymap for use as outline-mode-map, from keymap-list.
Built on top of optional BASE-MAP, or empty sparse map if none specified.
See doc string for outline-keybindings-list for format of binding list."
  (let ((map (or base-map (make-sparse-keymap))))
    (mapcar (lambda (cell)
	      (apply 'define-key map (if (null (cdr (cdr cell)))
					 (cons (concat outline-command-prefix
						       (car cell))
					       (cdr cell))
				       (list (car cell) (car (cdr cell))))))
	    keymap-list)
    map))
;;;_   > outline-mode (&optional toggle)
;;;_    . Defun:
(defvar outline-v18/9-file-var-hack nil
  "Horrible hack used to prevent invalid multiple triggering of outline
mode from prop-line file-var activation.  Used by outline-mode function
to track repeats.")
(defun outline-mode (&optional toggle)
;;;_    . Doc string:
  "Toggle minor mode for controlling exposure of and editing text
outlines.  Optional arg forces mode activation iff arg is positive.

Look below the description of the bindings for explanation of the
terminology use in outline-mode commands.

Exposure Commands		      Movement Commands
C-c C-h	outline-hide-current-subtree  C-c C-n outline-next-visible-heading
C-c C-i	outline-show-children	      C-c C-p outline-previous-visible-heading
C-c C-s	outline-show-current-subtree  C-c C-u outline-up-current-level
C-c C-o	outline-show-current-entry    C-c C-f outline-forward-current-level
C-c !   outline-show-all              C-c C-b outline-backward-current-level
	outline-hide-current-leaves   C-c C-e outline-end-of-current-entry
                                     C-c C-a outline-beginning-of-current-entry


Topic Header Generation Commands
C-c<SP>	outline-open-sibtopic	Create a new sibling after current topic
C-c .	outline-open-subtopic	... an offspring of current topic
C-c ,	outline-open-supertopic	... a sibling of the current topics' parent

Level and Prefix Adjustment Commands
C-c >	outline-shift-in	Shift current topic and all offspring deeper
C-c <	outline-shift-out	... less deep
C-c<CR>	outline-rebullet-topic	Reconcile bullets of topic and its offspring
                                - distinctive bullets are not changed, all
                                  others set suitable according to depth
C-c b	outline-rebullet-current-heading Prompt for alternate bullet for
					 current topic
C-c #	outline-number-siblings	Number bullets of topic and siblings - the
				offspring are not affected.  With repeat
				count, revoke numbering.

Killing and Yanking - all keep siblings numbering reconciled as appropriate
C-k	outline-kill-line	Regular kill line, but respects numbering ,etc
C-c C-k	outline-kill-topic	Kill current topic, including offspring
C-y	outline-yank		Yank, adjusting depth of yanked topic to
				depth of heading if yanking into bare topic
                                heading (ie, prefix sans text)
M-y	outline-yank-pop	Is to outline-yank as yank-pop is to yank

Misc commands
C-c @   outline-resolve-xref    pop-to-buffer named by xref (cf
                                outline-file-xref-bullet)
C-c c	outline-copy-exposed	Copy outline sans all hidden stuff to
				another buffer whose name is derived
				from the current one - \"XXX exposed\"
M-x outlineify-sticky           Activate outline mode for current buffer
                                and establish -*- outline -*- mode specifier
                                as well as file local vars to automatically
                                set exposure.  Try it.

\\<outline-mode-map>
		  HOT-SPOT Operation (Not available in Emacs v18.)

Hot-spot operation enables succinct outline operation.  When the
cursor is located on the bullet character of a topic, literal
characters invoke the commands of the corresponding control chars in
the outline-mode keymap.  Thus, 'f' would invoke the command bound to
<outline-command-prefix>-\C-f \(typically 'outline-forward-current-
level').

Thus, by positioning the cursor on a topic bullet, you can do each of
the outline navigation and manipulation commands with a single
keystroke.  Non-literal char do not get this special interpretation,
even on the hot-spot, so you can use them to get off of it, and back
to normal operation.

Note that the command outline-beginning-of-current-entry \(\\[outline-beginning-of-current-entry]\)
will move to the hot-spot when the cursor is already located at the
beginning of the current entry, so you can simply hit \\[outline-beginning-of-current-entry]
twice in a row to get to the hot-spot.

                             Terminology

Topic hierarchy constituents - TOPICS and SUBTOPICS:

TOPIC:	A basic, coherent component of an emacs outline.  It can
	contain other topics, and it can be subsumed by other topics,
CURRENT topic:
	The visible topic most immediately containing the cursor.
DEPTH:	The degree of nesting of a topic, it increases with
	containment.  Also called the
LEVEL:	The same as DEPTH.

ANCESTORS:
	The topics that contain a topic.
PARENT:	A topic's immediate ancestor.  It has a depth one less than
	the topic.
OFFSPRING:
	The topics contained by a topic,
CHILDREN:
	The immediate offspring of a topic.
SIBLINGS:
	Topics having the same parent.

Topic text constituents:

HEADER:	The first line of a topic, include the topic PREFIX and header
	text.
PREFIX: The leading text of a topic which which distinguishes it from
	normal text.  It has a strict form, which consists of a
	prefix-lead string, padding, and a bullet.  The bullet may be
	followed by a number, indicating the ordinal number of the
	topic among its siblings, a space, and then the header text.

	The relative length of the PREFIX determines the nesting depth
	of the topic.
PREFIX-LEAD:
	The string at the beginning of a topic prefix, normally a '.'.
	It can be customized by changing the setting of
	'outline-header-prefix' and then reinitializing outline-mode.

	By setting the prefix-lead to the comment-string of a
	programming language, you can embed outline-structuring in
	program code without interfering with the language processing
	of that code.
PREFIX-PADDING:
	Spaces or asterisks which separate the prefix-lead and the
	bullet, according to the depth of the topic.
BULLET: A character at the end of the topic prefix, it must be one of
	the characters listed on 'outline-plain-bullets-string' or
        'outline-distinctive-bullets-string'.  (See the documentation
        for these variables for more details.)  The default choice of
	bullet when generating varies in a cycle with the depth of the
	topic.
ENTRY:	The text contained in a topic before any offspring.
BODY:	Same as ENTRY.


EXPOSURE:
 	The state of a topic which determines the on-screen visibility
	of its' offspring and contained text.
CONCEALED:
	Topics and entry text whose display is inhibited.  Contiguous
	units of concealed text is represented by '...' ellipses.
	(Ref the 'selective-display' var.)

	Concealed topics are effectively collapsed within an ancestor.
CLOSED:	A topic whose immediate offspring and body-text is concealed.
OPEN:	A topic that is not closed."

;;;_    . Code
  (interactive "P")

  (let* ((active (and (not (equal major-mode 'outline))
		      (outline-mode-p)))
                                        ; Massage universal-arg 'toggle' val:
	 (toggle (and toggle
		      (or (and (listp toggle)(car toggle))
			  toggle)))
                                        ; Activation specficially demanded?
	 (explicit-activation (or
			       ;;
			       (and toggle
				    (or (symbolp toggle)
					(and (natnump toggle)
					     (not (zerop toggle)))))))
	 ;; outline-mode already called once during this complex command?
	 (same-complex-command (eq outline-v18/9-file-var-hack
				   (car command-history))))

					; See comments below re v19.18,.19 bug.
    (setq outline-v18/9-file-var-hack (car command-history))

    (cond

     ;; Hitting v19.18, 19.19 bug?
     ;; Emacs v 19.18, 19.19 file-var code invokes prop-line-designated
     ;; modes twice when file is visited.  We have to avoid toggling mode
     ;; off on second invocation, so we detect it as best we can, and
     ;; skip everything.
     ((and same-complex-command		; Still in same complex command
					; as last time outline-mode invoked.
	   active			; Already activated.
	   (not explicit-activation)	; Prop-line file-vars don't have args.
	   (string-match "^19.1[89]"	; Bug only known to be in v19.18 and
			 emacs-version)); 19.19.
      t)

     ;; Deactivate?
     ((and (not explicit-activation)
	   (or active toggle))
                                        ; Activation not explicitly
                                        ; requested, and either in
                                        ; active state or *de*activation
                                        ; specifically requested:
      (if (string-match "^18\." emacs-version)
					; Revoke those keys that remain
					; as we set them:
	  (let ((curr-loc (current-local-map)))
	    (mapcar '(lambda (cell)
		       (if (eq (lookup-key curr-loc (car cell))
			       (car (cdr cell)))
			   (define-key curr-loc (car cell)
			     (assq (car cell) outline-prior-bindings))))
		    outline-added-bindings)
	    (outline-resumptions 'outline-added-bindings)
	    (outline-resumptions 'outline-prior-bindings)))

      (if outline-old-style-prefixes
	  (progn
	    (outline-resumptions 'outline-primary-bullet)
	    (outline-resumptions 'outline-old-style-prefixes)))
      (outline-resumptions 'selective-display)
      (if (and (boundp 'before-change-function) before-change-function)
	  (outline-resumptions 'before-change-function))
      (setq pre-command-hook (delq 'outline-pre-command-business
				   pre-command-hook))
      (setq post-command-hook (delq 'outline-post-command-business
				    post-command-hook))
      (setq local-write-file-hooks
	    (delq 'outline-write-file-hook
		  local-write-file-hooks))
      (outline-resumptions 'paragraph-start)
      (outline-resumptions 'paragraph-separate)
      (outline-resumptions (if (string-match "^18" emacs-version)
			       'auto-fill-hook
			     'auto-fill-function))
      (outline-resumptions 'outline-former-auto-filler)
      (setq outline-mode nil))

     ;; Activate?
     ((not active)
      (if outline-old-style-prefixes
	  (progn			; Inhibit all the fancy formatting:
	    (outline-resumptions 'outline-primary-bullet '("*"))
	    (outline-resumptions 'outline-old-style-prefixes '(()))))
      (set-outline-regexp)
					; Produce map from current version
					; of outline-keybindings-list:
      (if (boundp 'minor-mode-map-alist)

	  (progn			; V19, and maybe lucid and
					; epoch, minor-mode key bindings:
	    (setq outline-mode-map
		  (produce-outline-mode-map outline-keybindings-list))
	    (fset 'outline-mode-map outline-mode-map)
					; Include on minor-mode-map-alist,
					; if not already there:
	    (if (not (member '(outline-mode . outline-mode-map)
			     minor-mode-map-alist))
		(setq minor-mode-map-alist
		      (cons '(outline-mode . outline-mode-map)
			    minor-mode-map-alist))))

					; V18 minor-mode key bindings:
					; Stash record of added bindings
					; for later revocation:
	(outline-resumptions 'outline-added-bindings
			     (list outline-keybindings-list))
	(outline-resumptions 'outline-prior-bindings
			     (list (current-local-map)))
					; and add them:
	(use-local-map (produce-outline-mode-map outline-keybindings-list
						 (current-local-map)))
	)

                                        ; selective-display is the
                                        ; emacs conditional exposure
                                        ; mechanism:
      (outline-resumptions 'selective-display '(t))
      (if outline-inhibit-protection
	  t
	(outline-resumptions 'before-change-function
			     '(outline-before-change-protect)))
      (add-hook 'post-command-hook 'outline-post-command-business)
      (add-hook 'pre-command-hook 'outline-pre-command-business)
					; Temporarily set by any outline
					; functions that can be trusted to
					; deal properly with concealed text.
      (add-hook 'local-write-file-hooks 'outline-write-file-hook)
                                        ; Custom auto-fill func, to support
                                        ; respect for topic headline,
					; hanging-indents, etc:
      (let* ((fill-func-var (if (string-match "^18" emacs-version)
				'auto-fill-hook
			      'auto-fill-function))
	     (fill-func (symbol-value fill-func-var)))
	;; Register prevailing fill func for use by outline-auto-fill:
	(outline-resumptions 'outline-former-auto-filler (list fill-func))
	;; Register outline-auto-fill to be used if filling is active:
	(outline-resumptions fill-func-var '(outline-auto-fill)))
      ;; Paragraphs are broken by topic headlines.
      (make-local-variable 'paragraph-start)
      (outline-resumptions 'paragraph-start
			   (list (concat paragraph-start "\\|^\\("
					 outline-regexp "\\)")))
      (make-local-variable 'paragraph-separate)
      (outline-resumptions 'paragraph-separate
			   (list (concat paragraph-separate "\\|^\\("
					 outline-regexp "\\)")))

      (or (assq 'outline-mode minor-mode-alist)
	  (setq minor-mode-alist
		(cons '(outline-mode " Outl") minor-mode-alist)))

      (if outline-enwrap-isearch-mode
	  (outline-enwrap-isearch))
      (run-hooks 'outline-mode-hook)
      (setq outline-mode t))
     )					; cond
    outline-mode
    )					; let*
  )					; defun


;;;_ #2 Internal Position State-Tracking Variables
;;; All basic outline functions which directly do string matches to
;;; evaluate heading prefix location set the variables
;;; outline-recent-prefix-beginning and outline-recent-prefix-end when
;;; successful.  Functions starting with 'outline-recent-' all use
;;; this state, providing the means to avoid redundant searches for
;;; just established data.  This optimization can provide significant
;;; speed improvement, but it must be employed carefully.
;;;_  = outline-recent-prefix-beginning
(defvar outline-recent-prefix-beginning 0
  "Buffer point of the start of the last topic prefix encountered.")
(make-variable-buffer-local 'outline-recent-prefix-beginning)
;;;_  = outline-recent-prefix-end
(defvar outline-recent-prefix-end 0
  "Buffer point of the end of the last topic prefix encountered.")
(make-variable-buffer-local 'outline-recent-prefix-end)
;;;_  > outline-prefix-data (beg end)
(defmacro outline-prefix-data (beg end)
  "Register outline-prefix state data - BEGINNING and END of prefix -
for reference by 'outline-recent' funcs.  Returns BEGINNING."
  (` (setq outline-recent-prefix-end (, end)
        outline-recent-prefix-beginning (, beg))))
;;;_  > outline-recent-depth ()
(defmacro outline-recent-depth ()
  "Return depth of last heading encountered by an outline maneuvering
function.

All outline functions which directly do string matches to assess
headings set the variables outline-recent-prefix-beginning and
outline-recent-prefix-end if successful.  This function uses those settings
to return the current depth."

  '(max 1 (- outline-recent-prefix-end
	     outline-recent-prefix-beginning
	     outline-header-subtraction)))
;;;_  > outline-recent-prefix ()
(defmacro outline-recent-prefix ()
  "Like outline-recent-depth, but returns text of last encountered prefix.

All outline functions which directly do string matches to assess
headings set the variables outline-recent-prefix-beginning and
outline-recent-prefix-end if successful.  This function uses those settings
to return the current depth."
  '(buffer-substring outline-recent-prefix-beginning
		     outline-recent-prefix-end))
;;;_  > outline-recent-bullet ()
(defmacro outline-recent-bullet ()
  "Like outline-recent-prefix, but returns bullet of last encountered
prefix.

All outline functions which directly do string matches to assess
headings set the variables outline-recent-prefix-beginning and
outline-recent-prefix-end if successful.  This function uses those settings
to return the current depth of the most recently matched topic."
  '(buffer-substring (1- outline-recent-prefix-end)
		     outline-recent-prefix-end))

;;;_ #3 Navigation

;;;_  - Position Assessment
;;;_   : Location Predicates
;;;_    > outline-on-current-heading-p ()
(defun outline-on-current-heading-p ()
  "Return prefix beginning point if point is on same line as current
visible topics' header line."
  (save-excursion
    (beginning-of-line)
    (and (looking-at outline-regexp)
	 (outline-prefix-data (match-beginning 0) (match-end 0)))))
;;;_    > outline-e-o-prefix-p ()
(defun outline-e-o-prefix-p ()
  "True if point is located where current topic prefix ends, heading
begins."
  (and (save-excursion (beginning-of-line)
		       (looking-at outline-regexp))
       (= (point)(save-excursion (outline-end-of-prefix)(point)))))
;;;_    > outline-hidden-p ()
(defmacro outline-hidden-p ()
  "True if point is in hidden text."
  '(save-excursion
     (and (re-search-backward "[\n\r]" () t)
	  (= ?\r (following-char)))))
;;;_    > outline-visible-p ()
(defmacro outline-visible-p ()
  "True if point is not in hidden text."
  (interactive)
  '(not (outline-hidden-p)))
;;;_   : Location attributes
;;;_    > outline-depth ()
(defmacro outline-depth ()
  "Like outline-current-depth, but respects hidden as well as visible
topics."
  '(save-excursion
     (if (outline-goto-prefix)
	 (outline-recent-depth)
       (progn
	 ;; Oops, no prefix, zero prefix data:
	 (outline-prefix-data (point)(point))
	 ;; ... and return 0:
	 0))))
;;;_    > outline-current-depth ()
(defmacro outline-current-depth ()
  "Return the depth to which the current containing visible topic is
nested in the outline."
  '(save-excursion
     (if (outline-back-to-current-heading)
	 (max 1
	      (- outline-recent-prefix-end
		 outline-recent-prefix-beginning
		 outline-header-subtraction))
       0)))
;;;_    > outline-get-current-prefix ()
(defun outline-get-current-prefix ()
  "Topic prefix of the current topic."
  (save-excursion
    (if (outline-goto-prefix)
	(outline-recent-prefix))))
;;;_    > outline-get-bullet ()
(defun outline-get-bullet ()
  "Return bullet of containing topic (visible or not)."
  (save-excursion
    (and (outline-goto-prefix)
	 (outline-recent-bullet))))
;;;_    > outline-current-bullet ()
(defun outline-current-bullet ()
  "Return bullet of current (visible) topic heading, or none if none found."
  (condition-case err
      (save-excursion
	(outline-back-to-current-heading)
	(buffer-substring (- outline-recent-prefix-end 1)
			  outline-recent-prefix-end))
    ;; Quick and dirty provision, ostensibly for missing bullet:
    (args-out-of-range nil))
  )
;;;_    > outline-get-prefix-bullet (prefix)
(defun outline-get-prefix-bullet (prefix)
  "Return the bullet of the header prefix string PREFIX."
  ;; Doesn't make sense if we're old-style prefixes, but this just
  ;; oughtn't be called then, so forget about it...
  (if (string-match outline-regexp prefix)
      (substring prefix (1- (match-end 0)) (match-end 0))))

;;;_  - Navigation macros
;;;_   > outline-next-heading ()
(defmacro outline-next-heading ()
  "Move to the heading for the topic \(possibly invisible) before this one.

Returns the location of the heading, or nil if none found."

  '(if (and (bobp) (not (eobp)))
       (forward-char 1))

  '(if (re-search-forward outline-line-boundary-regexp nil 0)
       (progn				; Got valid location state - set vars:
	 (outline-prefix-data
	  (goto-char (or (match-beginning 2)
			 outline-recent-prefix-beginning))
	  (or (match-end 2) outline-recent-prefix-end)))))
;;;_   > outline-previous-heading ()
(defmacro outline-previous-heading ()
  "Move to the next \(possibly invisible) heading line.

Return the location of the beginning of the heading, or nil if not found."

  '(if (bobp)
       nil
     (outline-goto-prefix)
     (if
	 ;; searches are unbounded and return nil if failed:
	 (or (re-search-backward outline-line-boundary-regexp nil 0)
	     (looking-at outline-bob-regexp))
	 (progn;; Got some valid location state - set vars:
	   (outline-prefix-data
	    (goto-char (or (match-beginning 2)
			   outline-recent-prefix-beginning))
	    (or (match-end 2) outline-recent-prefix-end))))))

;;;_  - Subtree Charting
;;;_   " These routines either produce or assess charts, which are
;;; nested lists of the locations of topics within a subtree.
;;;
;;; Use of charts enables efficient navigation of subtrees, by
;;; requiring only a single regexp-search based traversal, to scope
;;; out the subtopic locations.  The chart then serves as the basis
;;; for whatever assessment or adjustment of the subtree that is
;;; required, without requiring redundant topic-traversal procedures.

;;;_   > outline-chart-subtree (&optional orig-level prev-level)
(defun outline-chart-subtree (&optional orig-level prev-level)
  "Produce a location 'chart' of subtopics of the containing topic.
The entries for each immediate child consists of an integer for the
point of the beginning of the topic, followed by a 'chart' of the
immediate offspring of the subtopic, if any.

Use of charts enables efficient navigation of subtrees, by requiring
only a single regexp-search based traversal, to scope out the subtopic
locations.  The chart then serves as the basis for whatever assessment
or adjustment of the subtree that is required, without requiring
redundant topic-traversal procedures.

The function parameters are for internal recursion, and should not be
designated by external callers."

  ;; We're constantly looking ahead.  Impressive, huh?

  (let ((original (not orig-level))	; 'here' passed only during recursion.
	chart here level)
					; Initialize if not passed in:
    (if original
	(progn (setq orig-level (outline-depth))
	       (outline-next-heading)))
					; Consider only contents of orig topic:
    (if (not prev-level)
	(setq prev-level (1+ orig-level)))

    ;; Loop, rather than recurse, over the current levels' siblings, to
    ;; avoid overloading the typically quite constrained emacs max-lisp-
    ;; eval-depth.
    (while (and (not (eobp))
		(< orig-level (setq level (outline-recent-depth)))
					; Still within original topic:
		(cond ((= prev-level level)
		       (setq chart 	; Register this one and move on:
			     (cons (point) chart))
		       (outline-next-heading))

		      ((< prev-level level) ; Do higher level, then
					; continue with this one:
		       (setq chart (cons (outline-chart-subtree orig-level
								level)
					 chart))))))

    (if original			; We're at the end of the level...
					; Position to the end of the branch:
	(progn (and (not (eobp)) (forward-char -1))
	       (and (memq (preceding-char) '(?\n ?\^M))
		    (memq (aref (buffer-substring (max 1 (- (point) 3))
						  (point))
				1)
			  '(?\n ?\^M))
		    (forward-char -1))))

    chart				; (nreverse chart) not necessary,
					; and maybe not preferable.
    ))
;;;_   > outline-chart-topic (&optional orig-level prev-level)
(defmacro outline-chart-topic ()
  "Return a location 'chart' for the current topic and its subtopics,if any.
See 'outline-chart-subtree' for an explanation of charts."

  '(if (outline-goto-prefix)
       (let ((here (point))
	     (subtree (outline-chart-subtree orig-level prev-level)))
	 (if subtree
	     (list here subtree)
	   (list here)))))
;;;_   > outline-chart-siblings (&optional start end)
(defun outline-chart-siblings (&optional start end)
  "Produce a list of locations of this and succeeding sibling topics.
Effectively a top-level chart of siblings.  See 'outline-chart-subtree'
for an explanation of charts."
  (save-excursion
    (if (outline-goto-prefix)
	(let ((chart (list (point))))
	  (while (outline-next-sibling)
	    (setq chart (cons (point) chart)))
	  (if chart (setq chart (nreverse chart))))))
  )
;;;_   > outline-chart-to-reveal (chart depth)
(defun outline-chart-to-reveal (chart depth)

  "Return a flat list of the points in subtree CHART, up to DEPTH, which
are hidden.

Note that point can wind up at any of the points on chart, or at the
start point."

  (let (result here)
    (while (and (or (eq depth t) (> depth 0))
		chart)
      (setq here (car chart))
      (if (listp here)
	  (let ((further (outline-chart-to-reveal here (or (eq depth t)
							   (1- depth)))))
	    ;; We're on the start of a subtree - recurse with it, if there's
	    ;; more depth to go:
	    (if further (setq result (append further result)))
	    (setq chart (cdr chart)))
	(goto-char here)
	(if (= (preceding-char) ?\r)
	    (setq result (cons here result)))
	(setq chart (cdr chart))))
    result))
;;;_   > outline-chart-spec (chart spec &optional exposing)
(defun outline-chart-spec (chart spec &optional exposing)
  "Given a topic/subtree CHART and an exposure SPEC, produce a list of
exposure directive, indicating the locations to be exposed and the
prescribed exposure status.  Optional arg EXPOSING is an integer, with
0 indicating pending concealment, anything higher indicating depth to
which subtopic headers should be exposed, and negative numbers
indicating (negative of) the depth to which subtopic headers and
bodies should be exposed.

The produced list can have two types of entries.  Bare numbers
indicate points in the buffer where topic headers that should be
exposed reside.
 - bare negative numbers indicates that the topic starting at the
   point which is the negative of the number should be opened,
   including their entries.
 - bare positive values indicate that this topic header should be
   openned.
 - Lists signify the beginning and end points of regions that should
   be flagged, and the flag to employ.  (For concealment: '\(\?r\)', and
   exposure:"
  (while spec
    (cond ((listp spec)
	   )
	  )
    (setq spec (cdr spec)))
  )

;;;_  - Within Topic
;;;_   > outline-goto-prefix ()
(defun outline-goto-prefix ()
  "Put point at beginning of outline prefix for immediately containing
topic, visible or not.

Returns a the point at the beginning of the prefix, or nil if none."

  (if (= (point-min)(point-max))
      nil
    (let (done)
      (while (and (not done)
		  (re-search-backward "[\n\r]" nil 1))
	(forward-char 1)
	(if (looking-at outline-regexp)
	    (setq done (outline-prefix-data (match-beginning 0)
					    (match-end 0)))
	  (forward-char -1)))
      (if (and (bobp)
	       (looking-at outline-regexp))
	  (outline-prefix-data (match-beginning 0)(match-end 0))
	done))))
;;;_   > outline-end-of-prefix ()
(defun outline-end-of-prefix (&optional ignore-decorations)
  "Position cursor at beginning of header text, or just after bullet
if optional IGNORE-DECORATIONS non-nil."

  (if (not (outline-goto-prefix))
      nil
    (let ((match-data (match-data)))
      (goto-char (match-end 0))
      (if ignore-decorations
	  t
	(while (looking-at "[0-9]") (forward-char 1))
	(if (and (not (eolp)) (looking-at "\\s-")) (forward-char 1)))
      (store-match-data match-data))
    ;; Reestablish where we are:
    (outline-current-depth)))
;;;_   > outline-current-bullet-pos ()
(defun outline-current-bullet-pos ()
  "Return position of current \(visible) topic's bullet."

 (if (not (outline-current-depth))
      nil
   (1- (match-end 0))))
;;;_   > outline-back-to-current-heading ()
(defun outline-back-to-current-heading ()
  "Move to heading line of current visible topic, or beginning of heading
if already on visible heading line."
  (beginning-of-line)
  (prog1 (or (outline-on-current-heading-p)
             (and (re-search-backward (concat "^\\(" outline-regexp "\\)")
                                      nil
                                      'move)
                  (outline-prefix-data (match-beginning 1)(match-end 1))))
    (if (interactive-p) (outline-end-of-prefix))))
;;;_   > outline-pre-next-preface ()
(defun outline-pre-next-preface ()
  "Skip forward to just before the next heading line.

Returns that character position."

  (if (re-search-forward outline-line-boundary-regexp nil 'move)
      (prog1 (goto-char (match-beginning 0))
             (outline-prefix-data (match-beginning 2)(match-end 2)))))
;;;_   > outline-end-of-current-subtree ()
(defun outline-end-of-current-subtree ()
  "Put point at the end of the last leaf in the currently visible topic."
  (interactive)
  (outline-back-to-current-heading)
  (let ((opoint (point))
	(level (outline-recent-depth)))
    (outline-next-heading)
    (while (and (not (eobp))
                (> (outline-recent-depth) level))
      (outline-next-heading))
    (and (not (eobp)) (forward-char -1))
    (and (memq (preceding-char) '(?\n ?\^M))
         (memq (aref (buffer-substring (max 1 (- (point) 3)) (point)) 1)
               '(?\n ?\^M))
         (forward-char -1))
    (point)))
;;;_   > outline-beginning-of-current-entry ()
(defun outline-beginning-of-current-entry ()
  "When not already there, position the point at the beginning of the
body of the current topic.

If already there, move cursor to bullet for hot-spot operation.
\(See outline-mode doc string for details on hot-spot operation.)"
  (interactive)
  (let ((start-point (point)))
    (outline-end-of-prefix)
    (if (and (interactive-p)
	     (= (point) start-point))
	(goto-char (outline-current-bullet-pos)))))
;;;_   > outline-end-of-current-entry ()
(defun outline-end-of-current-entry ()
  "Position the point at the end of the current topics' entry."
  (interactive)
  (outline-show-entry)
  (prog1 (outline-pre-next-preface)
    (if (and (not (bobp))(looking-at "^$"))
        (forward-char -1)))
)

;;;_  - Depth-wise
;;;_   > outline-ascend-to-depth (depth)
(defun outline-ascend-to-depth (depth)
  "Ascend to depth DEPTH, returning depth if successful, nil if not."
  (if (and (> depth 0)(<= depth (outline-depth)))
      (let ((last-good (point)))
        (while (and (< depth (outline-depth))
                    (setq last-good (point))
                    (outline-beginning-of-level)
                    (outline-previous-heading)))
        (if (= (outline-recent-depth) depth)
            (progn (goto-char outline-recent-prefix-beginning)
                   depth)
          (goto-char last-good)
          nil))
    (if (interactive-p) (outline-end-of-prefix))))
;;;_   > outline-descend-to-depth (depth)
(defun outline-descend-to-depth (depth)
  "Descend to depth DEPTH within current topic, returning depth if
successful, nil if not."
  (let ((start-point (point))
        (start-depth (outline-depth)))
    (while
        (and (> (outline-depth) 0)
             (not (= depth (outline-recent-depth))) ; ... not there yet
             (outline-next-heading)     ; ... go further
             (< start-depth (outline-recent-depth)))) ; ... still in topic
    (if (and (> (outline-depth) 0)
             (= (outline-recent-depth) depth))
        depth
      (goto-char start-point)
      nil))
  )
;;;_   > outline-up-current-level (arg &optional dont-complain)
(defun outline-up-current-level (arg &optional dont-complain)
  "Move to the heading line of which the present line is a subheading.
With argument, move up ARG levels.  Don't return an error if
second, optional argument DONT-COMPLAIN, is non-nil."
  (interactive "p")
  (outline-back-to-current-heading)
  (let ((present-level (outline-recent-depth)))
    ;; Loop for iterating arg:
    (while (and (> (outline-recent-depth) 1)
                (> arg 0)
                (not (bobp)))
      ;; Loop for going back over current or greater depth:
      (while (and (not (< (outline-recent-depth) present-level))
                  (outline-previous-visible-heading 1)))
      (setq present-level (outline-current-depth))
      (setq arg (- arg 1)))
    )
  (prog1 (if (<= arg 0)
             outline-recent-prefix-beginning
           (if (interactive-p) (outline-end-of-prefix))
           (if (not dont-complain)
               (error "Can't ascend past outermost level.")))
    (if (interactive-p) (outline-end-of-prefix)))
  )

;;;_  - Linear
;;;_   > outline-next-sibling (&optional depth backward)
(defun outline-next-sibling (&optional depth backward)
  "Like outline-forward-current-level, but respects invisible topics.

Traverse at optional DEPTH, or current depth if none specified.

Go backward if optional arg BACKWARD is non-nil.

Return depth if successful, nil otherwise."

  (if (and backward (bobp))
      nil
    (let ((start-depth (or depth (outline-depth)))
          (start-point (point))
	  last-depth)
      (while (and (not (if backward (bobp) (eobp)))
                  (if backward (outline-previous-heading)
                    (outline-next-heading))
                  (> (setq last-depth (outline-recent-depth)) start-depth)))
      (if (and (not (eobp))
               (and (> (or last-depth (outline-depth)) 0)
                    (= (outline-recent-depth) start-depth)))
          outline-recent-prefix-beginning
        (goto-char start-point)
	(if depth (outline-depth) start-depth)
        nil))))
;;;_   > outline-previous-sibling (&optional depth backward)
(defun outline-previous-sibling (&optional depth backward)
  "Like outline-forward-current-level, but goes backwards and respects
invisible topics.

Optional DEPTH specifies depth to traverse, default current depth.

Optional BACKWARD reverses direction.

Return depth if successful, nil otherwise."
  (outline-next-sibling depth (not backward))
  )
;;;_   > outline-snug-back ()
(defun outline-snug-back ()
  "Position cursor at end of previous topic, presuming that we are at
the start of a topic prefix."
 (if (or (bobp) (eobp))
     nil
   (forward-char -1))
 (if (or (bobp) (not (memq (preceding-char) '(?\n ?\^M))))
     nil
   (forward-char -1)
   (if (or (bobp) (not (memq (preceding-char) '(?\n ?\^M))))
       (forward-char -1)))
 (point))
;;;_   > outline-beginning-of-level ()
(defun outline-beginning-of-level ()
  "Go back to the first sibling at this level, visible or not."
  (outline-end-of-level 'backward))
;;;_   > outline-end-of-level (&optional backward)
(defun outline-end-of-level (&optional backward)
  "Go to the last sibling at this level, visible or not."

  (let ((depth (outline-depth)))
    (while (outline-previous-sibling depth nil))
    (prog1 (outline-recent-depth)
      (if (interactive-p) (outline-end-of-prefix)))))
;;;_   > outline-next-visible-heading (arg)
(defun outline-next-visible-heading (arg)
  "Move to the next visible heading line, or as far as possible in
indicated direction if no more headings to be found.

With argument, repeats, backward if negative."

  (interactive "p")
  (let* ((backward (if (< arg 0) (setq arg (* -1 arg))))
	 (step (if backward -1 1))
	 prev got)

    (while (> arg 0)			; limit condition
      (while (and (not (if backward (bobp)(eobp))) ; boundary condition
		  (progn
		    ;; Move, skipping over all those concealed lines:
		    (forward-line step)
		    (not (setq got (looking-at outline-regexp))))))
      ;; Register this got, it may be the last:
      (if got (setq prev got))
      (setq arg (1- arg)))
    (cond (got				; Last move was to a prefix:
	   (outline-prefix-data (match-beginning 0) (match-end 0))
	   (outline-end-of-prefix))
	  (prev				; Last move wasn't, but prev was:
	   (outline-prefix-data (match-beginning 0) (match-end 0)))
	  ((not backward) (end-of-line) nil))))
;;;_   > outline-previous-visible-heading (arg)
(defun outline-previous-visible-heading (arg)
  "Move to the previous heading line.

With argument, repeats or can move forward if negative.
A heading line is one that starts with a `*' (or that outline-regexp
matches)."
  (interactive "p")
  (outline-next-visible-heading (- arg)))
;;;_   > outline-forward-current-level (arg)
(defun outline-forward-current-level (arg)
  "Position the point at the next heading of the same level, taking
optional repeat-count.

Non-nil optional arg BACKWARD reverses direction.

Returns that position, else nil if is not found."
  (interactive "p")
  (if (and (< arg 0) (bobp))
      nil
    (let ((start-depth (save-excursion
			 (outline-back-to-current-heading)
			 (outline-depth)))
          (start-point (point))
	  (backward (> 0 arg))
	  last-depth
	  (last-good (point)))
      (if backward (setq arg (* -1 arg)))
      (while (> arg 0)
	(while (and (not (if backward (bobp) (eobp)))
		    (if backward (outline-previous-visible-heading 1)
		      (outline-next-visible-heading 1))
		    (> (setq last-depth (outline-recent-depth)) start-depth)))
	(if (and last-depth (= last-depth start-depth) )
	    (setq last-good (point)
		  arg (1- arg))
	  (setq arg -1)))
      (if (and (not (eobp))
               (and (> (or last-depth (outline-depth)) 0)
                    (= (outline-recent-depth) start-depth)))
          outline-recent-prefix-beginning
	(goto-char last-good)
	(if (not (interactive-p))
	    nil
	  (outline-end-of-prefix)
	  (error "This is the %s topic on level %d."
		 (if backward "first" "last")
		 (outline-recent-depth)))))))
;;;_   > outline-backward-current-level (arg)
(defun outline-backward-current-level (arg)
  "Position the point at the previous heading of the same level, taking
optional repeat-count.

Returns that position, else nil if is not found."
  (interactive "p")
  (unwind-protect
      (if (interactive-p)
	  (let ((current-prefix-arg (* -1 arg)))
	    (call-interactively 'outline-forward-current-level))
	(outline-forward-current-level (* -1 arg)))
    (outline-end-of-prefix)))

;;;_ #4 Alteration

;;;_  - Fundamental
;;;_   > outline-before-change-protect (beg end)
(defun outline-before-change-protect (beg end)
  "Reveal concealed text pending improper (non-integral) changes, and
offer user choice to commit or forego the change.  Unchanged text is
reconcealed.  User has option to have changed text reconcealed.

Undo commands are specially treated - the user is not prompted for
choice, the undoes are always committed (based on presumption that the
things being undone were already subject to this regulation routine),
and undoes always leave the changed stuff exposed.

Changes to concealed regions are ignored while file is being written.
\(This is for the sake of functions that do change the file during
writes, like crypt and zip modes.)

Locally bound in outline buffers to 'before-change-function', which
in emacs 19 is run before any change to the buffer.  (Has no effect
in Emacs 18, which doesn't support before-change-function.)

Any functions which set ['this-command' to 'undo', or which set]
'outline-override-protect' non-nil (as does, eg, outline-flag-chars)
are exempt from this restriction."
  (if (and (outline-mode-p)
					; outline-override-protect
					; set by functions that know what
					; they're doing, eg outline internals:
	   (not outline-override-protect)
	   (not outline-during-write-cue)
	   (save-match-data		; Preserve operation position state.
					; Both beginning and end chars must
					; be exposed:
	     (save-excursion (if (memq this-command '(newline open-line))
				 ;; Compensate for stupid emacs {new,
				 ;; open-}line display optimization:
				 (setq beg (1+ beg)
				       end (1+ end)))
			     (goto-char beg)
			     (or (outline-hidden-p)
				 (and (not (= beg end))
				      (goto-char end)
				      (outline-hidden-p))))))
      (save-match-data
	(if (equal this-command 'undo)
		 ;; Allow undo without inhibition.
		 ;; - Undoing new and open-line hits stupid emacs redisplay
		 ;;   optimization (em 19 cmds.c, ~ line 200).
		 ;; - Presumably, undoing what was properly protected when
		 ;;   done.
		 ;; - Undo may be users' only recourse in protection faults.
		 ;; So, expose what getting changed:
	    (progn (message "Undo! - exposing concealed target...")
		   (sit-for 0)
		   (if (outline-hidden-p)
		       (outline-show-children))
		   (message "Undo!")
		   (sit-for 0))
	  (let (response
		(rehide-completely (save-excursion (outline-goto-prefix)
						   (outline-hidden-p)))
		rehide-place)

	    (save-excursion
	      (if (condition-case err
		      ;; Condition case to catch keyboard quits during reads.
		      (progn
					; Give them a peek where
			(save-excursion
			  (if (eolp) (setq rehide-place
					   (outline-goto-prefix)))
			  (outline-show-entry))
					; Present the message, but...
					; leave the cursor at the location
					; until they respond:
					; Then interpret the response:
			(while
			    (progn
			      (message (concat "Change inside concealed"
					       " region - do it? "
					       "(n or 'y'/'r'eclose)"))
			      (setq response (read-char))
			      (not
			       (cond ((memq response '(?r ?R))
				      (setq response 'reclose))
				     ((memq response '(?y ?Y ? ))
				      (setq response t))
				     ((memq response '(?n ?N 127))
				      (setq response nil)
				      t)
				     ((eq response ??)
				      (message
				       "'r' means 'yes, then reclose")
				      nil)
				     (t (message "Please answer y, n, or r")
					(sit-for 1)
					nil)))))
			response)
		    (quit nil))
					; Continue:
		  (if (eq response 'reclose)
		      (save-excursion
			(if rehide-place (goto-char rehide-place))
			(if rehide-completely
			    (outline-hide-current-entry-completely)
			  (outline-hide-current-entry)))
		    (if (outline-ascend-to-depth (1- (outline-recent-depth)))
			(outline-show-children)
		      (outline-show-to-offshoot)))
					; Prevent:
		(if rehide-completely
		    (save-excursion
		      (if rehide-place (goto-char rehide-place))
		      (outline-hide-current-entry-completely))
		  (outline-hide-current-entry))
		(error (concat
			"Change within concealed region prevented.")))))))
    )	; if
  )	; defun
;;;_   = outline-post-goto-bullet
(defvar outline-post-goto-bullet nil
  "Outline internal var, when set tells post-processing to reposition
on topic bullet, and then unset it.  Set by outline-pre-command-
business when implementing hot-spot operation, where literal
characters typed over a topic bullet are mapped to the command
of the corresponding control-key on the outline-mode-map.")
(make-variable-buffer-local 'outline-post-goto-bullet)
;;;_   > outline-post-command-business ()
(defun outline-post-command-business ()
  "A post-command-hook function for outline buffers, takes care of some
loose ends left by outline-before-change-protect.

- Nulls outline-override-protect, so it's not left open.

- Implements (and clears) outline-post-goto-bullet, for hot-spot
  outline commands.

- Massages buffer-undo-list so successive, standard character self-inserts are
  aggregated.  This kludge compensates for lack of undo bunching when
  before-change-function is used."

					; Apply any external change func:
  (if (outline-mode-p)	; In outline-mode.
      (progn
	(setq outline-override-protect nil)
	(and outline-during-write-cue
	     (setq outline-during-write-cue nil))
	;; Undo bunching business:
	(if (and (listp buffer-undo-list) ; Undo history being kept.
		 (equal this-command 'self-insert-command)
		 (equal last-command 'self-insert-command))
	    (let* ((prev-stuff (cdr buffer-undo-list))
		   (before-prev-stuff (cdr (cdr prev-stuff)))
		   cur-cell cur-from cur-to
		   prev-cell prev-from prev-to)
	      (if (and before-prev-stuff ; Goes back far enough to bother,
		       (not (car prev-stuff)) ; and break before current,
		       (not (car before-prev-stuff)) ; !and break before prev!
		       (setq prev-cell (car (cdr prev-stuff))) ; contents now,
		       (setq cur-cell (car buffer-undo-list)) ; contents prev.

		       ;; cur contents denote a single char insertion:
		       (numberp (setq cur-from (car cur-cell)))
		       (numberp (setq cur-to (cdr cur-cell)))
		       (= 1 (- cur-to cur-from))

		       ;; prev contents denote fewer than aggregate-limit
		       ;; insertions:
		       (numberp (setq prev-from (car prev-cell)))
		       (numberp (setq prev-to (cdr prev-cell)))
					; Below threshold:
		       (> outline-undo-aggregation (- prev-to prev-from)))
		  (setq buffer-undo-list
			(cons (cons prev-from cur-to)
			      (cdr (cdr (cdr buffer-undo-list))))))))
	;; Implement -post-goto-bullet, if set: (must be after undo business)
	(if (and outline-post-goto-bullet
		 (outline-current-bullet-pos))
	    (progn (goto-char (outline-current-bullet-pos))
		   (setq outline-post-goto-bullet nil)))
	)))
;;;_   > outline-pre-command-business ()
(defun outline-pre-command-business ()
  "A pre-command-hook function for outline buffers.  Implements
special behavior when cursor is on bullet char.

Self-insert characters are reinterpreted control-character references
into the outline-mode-map.  The outline-mode post-command hook will
position a cursor that has moved as a result of such reinterpretation,
on the destination topic's bullet, when the cursor wound up in the

The upshot is that you can get easy, single (unmodified) key outline
maneuvering and general operations by positioning the cursor on the
bullet char, and it continues until you deliberately some non-outline
motion command to relocate the cursor off of a bullet char."

  (if (and (eq this-command 'self-insert-command)
	   (eq (point)(outline-current-bullet-pos)))

      (let* ((this-key-num (if (numberp last-command-event)
			       last-command-event))
	     mapped-binding)

					; Map upper-register literals
					; to lower register:
	(if (<= 96 this-key-num)
	    (setq this-key-num (- this-key-num 32)))
					; Check if we have a literal:
	(if (and (<= 64 this-key-num)
		 (>= 96 this-key-num))
	    (setq mapped-binding
		  (lookup-key 'outline-mode-map
			      (concat outline-command-prefix
				      (char-to-string (- this-key-num 64))))))
	(if mapped-binding
	    (setq outline-post-goto-bullet t
		  this-command mapped-binding)))))

;;;_  - Topic Format Assessment
;;;_   > outline-solicit-alternate-bullet (depth &optional current-bullet)
(defun outline-solicit-alternate-bullet (depth &optional current-bullet)

  "Prompt for and return a bullet char as an alternative to the
current one.  Offer one suitable for current depth DEPTH as default."

  (let* ((default-bullet (or current-bullet
                             (outline-bullet-for-depth depth)))
	 (sans-escapes (regexp-sans-escapes outline-bullets-string))
	 (choice (solicit-char-in-string
                  (format "Select bullet: %s ('%s' default): "
			  sans-escapes
                          default-bullet)
		  sans-escapes
                  t)))
    (if (string= choice "") default-bullet choice))
  )
;;;_   > outline-sibling-index (&optional depth)
(defun outline-sibling-index (&optional depth)
  "Item number of this prospective topic among its siblings.

If optional arg depth is greater than current depth, then we're
opening a new level, and return 0.

If less than this depth, ascend to that depth and count..."

  (save-excursion
    (cond ((and depth (<= depth 0) 0))
          ((or (not depth) (= depth (outline-depth)))
           (let ((index 1))
             (while (outline-previous-sibling (outline-recent-depth) nil)
	       (setq index (1+ index)))
             index))
          ((< depth (outline-recent-depth))
           (outline-ascend-to-depth depth)
           (outline-sibling-index))
          (0))))
;;;_   > outline-distinctive-bullet (bullet)
(defun outline-distinctive-bullet (bullet)
  "True if bullet is one of those on outline-distinctive-bullets-string."
  (string-match (regexp-quote bullet) outline-distinctive-bullets-string))
;;;_   > outline-numbered-type-prefix (&optional prefix)
(defun outline-numbered-type-prefix (&optional prefix)
  "True if current header prefix bullet is numbered bullet."
  (and outline-numbered-bullet
        (string= outline-numbered-bullet
                 (if prefix
                     (outline-get-prefix-bullet prefix)
                   (outline-get-bullet)))))
;;;_   > outline-bullet-for-depth (&optional depth)
(defun outline-bullet-for-depth (&optional depth)
  "Return outline topic bullet suited to DEPTH, or for current depth if none
specified."
  ;; Find bullet in plain-bullets-string modulo DEPTH.
  (if outline-stylish-prefixes
      (char-to-string (aref outline-plain-bullets-string
                            (% (max 0 (- depth 2))
                               outline-plain-bullets-string-len)))
    outline-primary-bullet)
  )

;;;_  - Topic Production
;;;_   > outline-make-topic-prefix (&optional prior-bullet
(defun outline-make-topic-prefix (&optional prior-bullet
                                            new
                                            depth
                                            solicit
                                            number-control
                                            index)
  ;; Depth null means use current depth, non-null means we're either
  ;; opening a new topic after current topic, lower or higher, or we're
  ;; changing level of current topic.
  ;; Solicit dominates specified bullet-char.
;;;_    . Doc string:
  "Generate a topic prefix suitable for optional arg DEPTH, or current
depth if not specified.

All the arguments are optional.

PRIOR-BULLET indicates the bullet of the prefix being changed, or
nil if none.  This bullet may be preserved (other options
notwithstanding) if it is on the outline-distinctive-bullets-string,
for instance.

Second arg NEW indicates that a new topic is being opened after the
topic at point, if non-nil.  Default bullet for new topics, eg, may
be set (contingent to other args) to numbered bullets if previous
sibling is one.  The implication otherwise is that the current topic
is being adjusted - shifted or rebulleted - and we don't consider
bullet or previous sibling.

Third arg DEPTH forces the topic prefix to that depth, regardless of
the current topics' depth.

Fourth arg SOLICIT non-nil provokes solicitation from the user of a
choice among the valid bullets.  (This overrides other all the
options, including, eg, a distinctive PRIOR-BULLET.)

Fifth arg, NUMBER-CONTROL, matters only if 'outline-numbered-bullet'
is non-nil *and* soliciting was not explicitly invoked.  Then
NUMBER-CONTROL non-nil forces prefix to either numbered or
denumbered format, depending on the value of the sixth arg, INDEX.

\(Note that NUMBER-CONTROL does *not* apply to level 1 topics.  Sorry...)

If NUMBER-CONTROL is non-nil and sixth arg INDEX is non-nil then
the prefix of the topic is forced to be numbered.  Non-nil
NUMBER-CONTROL and nil INDEX forces non-numbered format on the
bullet.  Non-nil NUMBER-CONTROL and non-nil, non-number INDEX means
that the index for the numbered prefix will be derived, by counting
siblings back to start of level.  If INDEX is a number, then that
number is used as the index for the numbered prefix (allowing, eg,
sequential renumbering to not requre this function counting back the
index for each successive sibling)."
;;;_    . Code:
  ;; The options are ordered in likely frequence of use, most common
  ;; highest, least lowest.  Ie, more likely to be doing prefix
  ;; adjustments than soliciting, and yet more than numbering.
  ;; Current prefix is least dominant, but most likely to be commonly
  ;; specified...

  (let* (body
         numbering
         denumbering
         (depth (or depth (outline-depth)))
         (header-lead outline-header-prefix)
         (bullet-char

          ;; Getting value for bullet char is practically the whole job:

          (cond
                                        ; Simplest situation - level 1:
           ((<= depth 1) (setq header-lead "") outline-primary-bullet)
                                        ; Simple, too: all asterisks:
           (outline-old-style-prefixes
            ;; Cheat - make body the whole thing, null out header-lead and
            ;; bullet-char:
            (setq body (make-string depth
                                    (string-to-char outline-primary-bullet)))
            (setq header-lead "")
            "")

           ;; (Neither level 1 nor old-style, so we're space padding.
           ;; Sneak it in the condition of the next case, whatever it is.)

           ;; Solicitation overrides numbering and other cases:
           ((progn (setq body (make-string (- depth 2) ?\ ))
                   ;; The actual condition:
                   solicit)
            (let* ((got (outline-solicit-alternate-bullet depth)))
              ;; Gotta check whether we're numbering and got a numbered bullet:
              (setq numbering (and outline-numbered-bullet
                                   (not (and number-control (not index)))
                                   (string= got outline-numbered-bullet)))
              ;; Now return what we got, regardless:
              got))

           ;; Numbering invoked through args:
           ((and outline-numbered-bullet number-control)
            (if (setq numbering (not (setq denumbering (not index))))
                outline-numbered-bullet
              (if (and current-bullet
                       (not (string= outline-numbered-bullet
                                     current-bullet)))
                  current-bullet
                (outline-bullet-for-depth depth))))

          ;;; Neither soliciting nor controlled numbering ;;;
             ;;; (may be controlled denumbering, tho) ;;;

           ;; Check wrt previous sibling:
           ((and new				  ; only check for new prefixes
                 (<= depth (outline-depth))
                 outline-numbered-bullet	      ; ... & numbering enabled
                 (not denumbering)
                 (let ((sibling-bullet
                        (save-excursion
                          ;; Locate correct sibling:
                          (or (>= depth (outline-depth))
                              (outline-ascend-to-depth depth))
                          (outline-get-bullet))))
                   (if (and sibling-bullet
                            (string= outline-numbered-bullet sibling-bullet))
                       (setq numbering sibling-bullet)))))

           ;; Distinctive prior bullet?
           ((and prior-bullet
                 (outline-distinctive-bullet prior-bullet)
                 ;; Either non-numbered:
                 (or (not (and outline-numbered-bullet
                               (string= prior-bullet outline-numbered-bullet)))
                     ;; or numbered, and not denumbering:
                     (setq numbering (not denumbering)))
                 ;; Here 'tis:
                 prior-bullet))

           ;; Else, standard bullet per depth:
           ((outline-bullet-for-depth depth)))))

    (concat header-lead
            body
            bullet-char
            (if numbering
                (format "%d" (cond ((and index (numberp index)) index)
                                   (new (1+ (outline-sibling-index depth)))
                                   ((outline-sibling-index))))))
    )
  )
;;;_   > outline-open-topic (relative-depth &optional before)
(defun outline-open-topic (relative-depth &optional before)
  "Open a new topic at depth DEPTH.  New topic is situated after current
one, unless optional flag BEFORE is non-nil, or unless current line
is complete empty (not even whitespace), in which case open is done
on current line.

Nuances:

- Creation of new topics is with respect to the visible topic
  containing the cursor, regardless of intervening concealed ones.

- New headers are generally created after/before the body of a
  topic.  However, they are created right at cursor location if the
  cursor is on a blank line, even if that breaks the current topic
  body.  This is intentional, to provide a simple means for
  deliberately dividing topic bodies.

- Double spacing of topic lists is preserved.  Also, the first
  level two topic is created double-spaced (and so would be
  subsequent siblings, if that's left intact).  Otherwise,
  single-spacing is used.

- Creation of sibling or nested topics is with respect to the topic
  you're starting from, even when creating backwards.  This way you
  can easily create a sibling in front of the current topic without
  having to go to its preceeding sibling, and then open forward
  from there."

  (let* ((depth (+ (outline-current-depth) relative-depth))
         (opening-on-blank (if (looking-at "^\$")
                               (not (setq before nil))))
         opening-numbered	; Will get while computing ref-topic, below
         ref-depth		; Will get while computing ref-topic, next
         (ref-topic (save-excursion
                      (cond ((< relative-depth 0)
                             (outline-ascend-to-depth depth))
                            ((>= relative-depth 1) nil)
                            (t (outline-back-to-current-heading)))
                      (setq ref-depth (outline-recent-depth))
                      (setq opening-numbered
                            (save-excursion
                              (and outline-numbered-bullet
                                   (or (<= relative-depth 0)
                                       (outline-descend-to-depth depth))
                                   (if (outline-numbered-type-prefix)
                                       outline-numbered-bullet))))
                      (point)))
         dbl-space
         doing-beginning)

    (if (not opening-on-blank)
                                        ; Positioning and vertical
                                        ; padding - only if not
                                        ; opening-on-blank:
        (progn
          (goto-char ref-topic)
          (setq dbl-space               ; Determine double space action:
                (or (and (<= relative-depth 0)	; not descending;
                         (save-excursion
                           ;; at b-o-b or preceeded by a blank line?
                           (or (> 0 (forward-line -1))
                               (looking-at "^\\s-*$")
			       (bobp)))
                         (save-excursion
                           ;; succeeded by a blank line?
                           (outline-end-of-current-subtree)
                           (bolp)))
                    (and (= ref-depth 1)
                         (or before
                             (= depth 1)
                             (save-excursion
                               ;; Don't already have following
                               ;; vertical padding:
                               (not (outline-pre-next-preface)))))))

                                        ; Position to prior heading,
                                        ; if inserting backwards, and
					; not going outwards:
          (if (and before (>= relative-depth 0))
	      (progn (outline-back-to-current-heading)
                            (setq doing-beginning (bobp))
                            (if (not (bobp))
                                (outline-previous-heading)))
	    (if (and before (bobp))
		(outline-unprotected (open-line 1))))

          (if (<= relative-depth 0)
              ;; Not going inwards, don't snug up:
              (if doing-beginning
		  (outline-unprotected (open-line (if dbl-space 2 1)))
		(if before
		    (progn (end-of-line)
			   (outline-pre-next-preface)
			   (while (= ?\r (following-char))
                             (forward-char 1))
			   (if (not (looking-at "^$"))
			       (outline-unprotected (open-line 1))))
		  (outline-end-of-current-subtree)))
            ;; Going inwards - double-space if first offspring is,
            ;; otherwise snug up.
            (end-of-line)		; So we skip any concealed progeny.
            (outline-pre-next-preface)
            (if (bolp)
                ;; Blank lines between current header body and next
                ;; header - get to last substantive (non-white-space)
                ;; line in body:
                (re-search-backward "[^ \t\n]" nil t))
            (if (save-excursion
                  (outline-next-heading)
                  (if (> (outline-recent-depth) ref-depth)
                      ;; This is an offspring.
                      (progn (forward-line -1)
                             (looking-at "^\\s-*$"))))
                (progn (forward-line 1)
                       (outline-unprotected (open-line 1))))
            (end-of-line))
          ;;(if doing-beginning (goto-char doing-beginning))
          (if (not (bobp))
              (progn (if (and (not (> depth ref-depth))
                              (not before))
                         (outline-unprotected (open-line 1))
		       (if (> depth ref-depth)
			   (outline-unprotected (newline 1))
			 (if dbl-space
			     (outline-unprotected (open-line 1))
			   (if (not before)
			       (outline-unprotected (newline 1))))))
                     (if dbl-space
			 (outline-unprotected (newline  1)))
                     (if (and (not (eobp))
                              (not (bolp)))
                         (forward-char 1))))
          ))
    (insert-string (concat (outline-make-topic-prefix opening-numbered
                                                      t
                                                      depth)
                           " "))

    ;;(if doing-beginning (save-excursion (newline (if dbl-space 2 1))))


    (outline-rebullet-heading nil		;;; solicit
                              depth 		;;; depth
                              nil 		;;; number-control
                              nil		;;; index
                              t)     (end-of-line)
    )
  )
;;;_    . open-topic contingencies
;;;_     ; base topic - one from which open was issued
;;;_      , beginning char
;;;_      , amount of space before will be used, unless openning in place
;;;_      , end char will be used, unless opening before (and it still may)
;;;_     ; absolute depth of new topic
;;;_     ! insert in place - overrides most stuff
;;;_     ; relative depth of new re base
;;;_     ; before or after base topic
;;;_     ; spacing around topic, if any, prior to new topic and at same depth
;;;_     ; buffer boundaries - special provisions for beginning and end ob
;;;_     ; level 1 topics have special provisions also - double space.
;;;_     ; location of new topic
;;;_    .
;;;_   > outline-open-subtopic (arg)
(defun outline-open-subtopic (arg)
  "Open new topic header at deeper level than the current one.

Negative universal arg means to open deeper, but place the new topic
prior to the current one."
  (interactive "p")
  (outline-open-topic 1 (> 0 arg)))
;;;_   > outline-open-sibtopic (arg)
(defun outline-open-sibtopic (arg)
  "Open new topic header at same level as the current one.  Negative
universal arg means to place the new topic prior to the current
one."
  (interactive "p")
  (outline-open-topic 0 (> 0 arg)))
;;;_   > outline-open-supertopic (arg)
(defun outline-open-supertopic (arg)
  "Open new topic header at shallower level than the current one.
Negative universal arg means to open shallower, but place the new
topic prior to the current one."

  (interactive "p")
  (outline-open-topic -1 (> 0 arg)))

;;;_  - Outline Alteration
;;;_   : Topic Modification
;;;_    = outline-former-auto-filler
(defvar outline-former-auto-filler nil
  "Name of modal fill function being wrapped by outline-auto-fill.")
;;;_    > outline-auto-fill ()
(defun outline-auto-fill ()
  "Do normal autofill, maintaining outline hanging topic indentation
if outline-use-hanging-indents is set."
  (let ((fill-prefix (if outline-use-hanging-indents
                         ;; Check for topic header indentation:
                         (save-excursion
                           (beginning-of-line)
                           (if (looking-at outline-regexp)
                               ;; ... construct indentation to account for
                               ;; length of topic prefix:
                               (make-string (progn (outline-end-of-prefix)
                                                   (current-column))
                                            ?\ ))))))
    (if (or outline-former-auto-filler outline-use-hanging-indents)
        (do-auto-fill))))
;;;_    > outline-reindent-body (old-depth new-depth &optional number)
(defun outline-reindent-body (old-depth new-depth &optional number)
  "Reindent body lines which were indented at old-depth to new-depth.

Optional arg NUMBER indicates numbering is being added, and it must
be accomodated.

Note that refill of indented paragraphs is not done."

  (save-excursion
    (outline-end-of-prefix)
    (let* ((new-margin (current-column))
	   excess old-indent-begin old-indent-end
	   curr-ind
	   ;; We want the column where the header-prefix text started
	   ;; *before* the prefix was changed, so we infer it relative
	   ;; to the new margin and the shift in depth:
	   (old-margin (+ old-depth (- new-margin new-depth))))

      ;; Process lines up to (but excluding) next topic header:
      (outline-unprotected
       (save-match-data
         (while
	     (and (re-search-forward "[\n\r]\\(\\s-*\\)"
				     nil
				     t)
		  ;; Register the indent data, before we reset the
		  ;; match data with a subsequent 'looking-at':
		  (setq old-indent-begin (match-beginning 1)
			old-indent-end (match-end 1))
		  (not (looking-at outline-regexp)))
	   (if (> 0 (setq excess (- (current-column)
				     old-margin)))
	       ;; Text starts left of old margin - don't adjust:
	       nil
	     ;; Text was hanging at or right of old left margin -
	     ;; reindent it, preserving its existing indentation
	     ;; beyond the old margin:
	     (delete-region old-indent-begin old-indent-end)
	     (indent-to (+ new-margin excess)))))))))
;;;_    > outline-rebullet-current-heading (arg)
(defun outline-rebullet-current-heading (arg)
  "Like non-interactive version 'outline-rebullet-heading', but work on
\(only) visible heading containing point.

With repeat count, solicit for bullet."
  (interactive "P")
  (save-excursion (outline-back-to-current-heading)
                  (outline-end-of-prefix)
                  (outline-rebullet-heading (not arg)	;;; solicit
                                            nil		;;; depth
                                            nil		;;; number-control
                                            nil		;;; index
                                            t)		;;; do-successors
                  )
  )
;;;_    > outline-rebullet-heading (&optional solicit ...)
(defun outline-rebullet-heading (&optional solicit
                                           new-depth
                                           number-control
                                           index
                                           do-successors)

  "Adjust bullet of current topic prefix.

All args are optional.

If SOLICIT is non-nil then the choice of bullet is solicited from
user.  Otherwise the distinctiveness of the bullet or the topic
depth determines it.

Second arg DEPTH forces the topic prefix to that depth, regardless
of the topics current depth.

Third arg NUMBER-CONTROL can force the prefix to or away from
numbered form.  It has effect only if 'outline-numbered-bullet' is
non-nil and soliciting was not explicitly invoked (via first arg).
Its effect, numbering or denumbering, then depends on the setting
of the forth arg, INDEX.

If NUMBER-CONTROL is non-nil and forth arg INDEX is nil, then the
prefix of the topic is forced to be non-numbered.  Null index and
non-nil NUMBER-CONTROL forces denumbering.  Non-nil INDEX (and
non-nil NUMBER-CONTROL) forces a numbered-prefix form.  If non-nil
INDEX is a number, then that number is used for the numbered
prefix.  Non-nil and non-number means that the index for the
numbered prefix will be derived by outline-make-topic-prefix.

Fifth arg DO-SUCCESSORS t means re-resolve count on succeeding
siblings.

Cf vars 'outline-stylish-prefixes', 'outline-old-style-prefixes',
and 'outline-numbered-bullet', which all affect the behavior of
this function."

  (let* ((current-depth (outline-depth))
         (new-depth (or new-depth current-depth))
         (mb outline-recent-prefix-beginning)
         (me outline-recent-prefix-end)
         (current-bullet (buffer-substring (- me 1) me))
         (new-prefix (outline-make-topic-prefix current-bullet
                                                nil
                                                new-depth
                                                solicit
                                                number-control
                                                index)))

    ;; Is new one is identical to old?
    (if (and (= current-depth new-depth)
             (string= current-bullet
                      (substring new-prefix (1- (length new-prefix)))))
	;; Nothing to do:
        t

      ;; New prefix probably different from old:
					; get rid of old one:
      (outline-unprotected (delete-region mb me))
      (goto-char mb)
					; Dispense with number if
					; numbered-bullet prefix:
      (if (and outline-numbered-bullet
               (string= outline-numbered-bullet current-bullet)
               (looking-at "[0-9]+"))
	  (outline-unprotected
	   (delete-region (match-beginning 0)(match-end 0))))

					; Put in new prefix:
      (outline-unprotected (insert-string new-prefix))

      ;; Reindent the body if elected and margin changed:
      (if (and outline-reindent-bodies
	       (not (= new-depth current-depth)))
	  (outline-reindent-body current-depth new-depth))

      ;; Recursively rectify successive siblings of orig topic if
      ;; caller elected for it:
      (if do-successors
	  (save-excursion
	    (while (outline-next-sibling new-depth nil)
	      (setq index
		    (cond ((numberp index) (1+ index))
			  ((not number-control)  (outline-sibling-index))))
	      (if (outline-numbered-type-prefix)
		  (outline-rebullet-heading nil		;;; solicit
					    new-depth	;;; new-depth
					    number-control;;; number-control
					    index	;;; index
					    nil)))))	;;;(dont!)do-successors
      )	; (if (and (= current-depth new-depth)...))
    ) ; let* ((current-depth (outline-depth))...)
  ) ; defun
;;;_    > outline-rebullet-topic (arg)
(defun outline-rebullet-topic (arg)
  "Like outline-rebullet-topic-grunt, but start from topic visible at point.
Descends into invisible as well as visible topics, however.

With repeat count, shift topic depth by that amount."
  (interactive "P")
  (let ((start-col (current-column))
        (was-eol (eolp)))
    (save-excursion
      ;; Normalize arg:
      (cond ((null arg) (setq arg 0))
            ((listp arg) (setq arg (car arg))))
      ;; Fill the user in, in case we're shifting a big topic:
      (if (not (zerop arg)) (message "Shifting..."))
      (outline-back-to-current-heading)
      (if (<= (+ (outline-recent-depth) arg) 0)
          (error "Attempt to shift topic below level 1"))
      (outline-rebullet-topic-grunt arg)
      (if (not (zerop arg)) (message "Shifting... done.")))
    (move-to-column (max 0 (+ start-col arg)))))
;;;_     > outline-rebullet-topic-grunt (&optional relative-depth ...)
(defun outline-rebullet-topic-grunt (&optional relative-depth
                                               starting-depth
                                               starting-point
                                               index
                                               do-successors)

  "Rebullet the topic at point, visible or invisible, and all
contained subtopics.  See outline-rebullet-heading for rebulleting
behavior.

All arguments are optional.

First arg RELATIVE-DEPTH means to shift the depth of the entire
topic that amount.

The rest of the args are for internal recursive use by the function
itself.  The are STARTING-DEPTH, STARTING-POINT, and INDEX."

  (let* ((relative-depth (or relative-depth 0))
         (new-depth (outline-depth))
         (starting-depth (or starting-depth new-depth))
         (on-starting-call  (null starting-point))
         (index (or index
                    ;; Leave index null on starting call, so rebullet-heading
                    ;; calculates it at what might be new depth:
                    (and (or (zerop relative-depth)
                             (not on-starting-call))
                         (outline-sibling-index))))
         (moving-outwards (< 0 relative-depth))
         (starting-point (or starting-point (point))))

    ;; Sanity check for excessive promotion done only on starting call:
    (and on-starting-call
         moving-outwards
         (> 0 (+ starting-depth relative-depth))
         (error "Attempt to shift topic out beyond level 1."))	;;; ====>

    (cond ((= starting-depth new-depth)
           ;; We're at depth to work on this one:
           (outline-rebullet-heading nil		;;; solicit
                                     (+ starting-depth	;;; starting-depth
                                        relative-depth)
                                     nil		;;; number
                                     index		;;; index
                                     ;; Every contained topic will get hit,
                                     ;; and we have to get to outside ones
                                     ;; deliberately:
                                     nil)		;;; do-successors
           ;; ... and work on subsequent ones which are at greater depth:
           (setq index 0)
           (outline-next-heading)
           (while (and (not (eobp))
                       (< starting-depth (outline-recent-depth)))
             (setq index (1+ index))
             (outline-rebullet-topic-grunt relative-depth   ;;; relative-depth
                                           (1+ starting-depth);;;starting-depth
                                           starting-point   ;;; starting-point
                                           index)))	    ;;; index

          ((< starting-depth new-depth)
           ;; Rare case - subtopic more than one level deeper than parent.
           ;; Treat this one at an even deeper level:
           (outline-rebullet-topic-grunt relative-depth   ;;; relative-depth
                                         new-depth	  ;;; starting-depth
                                         starting-point	  ;;; starting-point
                                         index)))	  ;;; index

    (if on-starting-call
        (progn
          ;; Rectify numbering of former siblings of the adjusted topic,
          ;; if topic has changed depth
          (if (or do-successors
                  (and (not (zerop relative-depth))
                       (or (= (outline-recent-depth) starting-depth)
                           (= (outline-recent-depth) (+ starting-depth
                                                        relative-depth)))))
              (outline-rebullet-heading nil nil nil nil t))
          ;; Now rectify numbering of new siblings of the adjusted topic,
          ;; if depth has been changed:
          (progn (goto-char starting-point)
                 (if (not (zerop relative-depth))
                     (outline-rebullet-heading nil nil nil nil t)))))
    )
  )
;;;_    > outline-renumber-to-depth (&optional depth)
(defun outline-renumber-to-depth (&optional depth)
  "Renumber siblings at current depth, from point, and shallower
if optional arg DEPTH is less than current depth.

Returns final depth."

  ;; Proceed by level, processing subsequent siblings on each,
  ;; ascending until we get shallower than the start depth:

  (let ((ascender (outline-depth)))
    (while (and (not (eobp))
		(outline-depth)
                (>= (outline-recent-depth) depth)
                (>= ascender depth))
                                        ; Skip over all topics at
                                        ; lesser depths, which can not
                                        ; have been disturbed:
      (while (and (not (eobp))
		  (> (outline-recent-depth) ascender))
        (outline-next-heading))
                                        ; Prime ascender for ascension:
      (setq ascender (1- (outline-recent-depth)))
      (if (>= (outline-recent-depth) depth)
          (outline-rebullet-heading nil	;;; solicit
                                    nil	;;; depth
                                    nil	;;; number-control
                                    nil	;;; index
                                    t))));;; do-successors
  (outline-recent-depth))
;;;_    > outline-number-siblings (&optional denumber)
(defun outline-number-siblings (&optional denumber)
  "Assign numbered topic prefix to this topic and its siblings.

With universal argument, denumber - assign default bullet to this
topic and its siblings.

With repeated universal argument (`^U^U'), solicit bullet for each
rebulleting each topic at this level."

  (interactive "P")

  (save-excursion
    (outline-back-to-current-heading)
    (outline-beginning-of-level)
    (let ((depth (outline-recent-depth))
	  (index (if (not denumber) 1))
          (use-bullet (equal '(16) denumber))
          (more t))
      (while more
        (outline-rebullet-heading use-bullet		;;; solicit
                                  depth			;;; depth
                                  t			;;; number-control
                                  index			;;; index
                                  nil)			;;; do-successors
        (if index (setq index (1+ index)))
        (setq more (outline-next-sibling depth nil))))))
;;;_    > outline-shift-in (arg)
(defun outline-shift-in (arg)
  "Decrease prefix depth of current heading and any topics collapsed
within it."
  (interactive "p")
  (outline-rebullet-topic arg))
;;;_    > outline-shift-out (arg)
(defun outline-shift-out (arg)
  "Decrease prefix depth of current heading and any topics collapsed
within it."
  (interactive "p")
  (outline-rebullet-topic (* arg -1)))
;;;_   : Surgery (kill-ring) functions with special provisions for outlines:
;;;_    > outline-kill-line (&optional arg)
(defun outline-kill-line (&optional arg)
  "Kill line, adjusting subsequent lines suitably for outline mode."

  (interactive "*P")
  (if (not (and (outline-mode-p)		; active outline mode,
		outline-numbered-bullet		; numbers may need adjustment,
		(bolp)				; may be clipping topic head,
		(looking-at outline-regexp)))	; are clipping topic head.
      ;; Above conditions do not obtain - just do a regular kill:
      (kill-line arg)
    ;; Ah, have to watch out for adjustments:
    (let* ((depth (outline-depth)))
                                        ; Do the kill:
      (kill-line arg)
                                        ; Provide some feedback:
      (sit-for 0)
      (save-excursion
                                        ; Start with the topic
                                        ; following killed line:
        (if (not (looking-at outline-regexp))
            (outline-next-heading))
        (outline-renumber-to-depth depth)))))
;;;_    > outline-kill-topic ()
(defun outline-kill-topic ()
  "Kill topic together with subtopics.

Leaves primary topic's trailing vertical whitespace, if any."

  ;; Some finagling is done to make complex topic kills appear faster
  ;; than they actually are.  A redisplay is performed immediately
  ;; after the region is disposed of, though the renumbering process
  ;; has yet to be performed.  This means that there may appear to be
  ;; a lag *after* the kill has been performed.

  (interactive)
  (let* ((beg (prog1 (outline-back-to-current-heading)(beginning-of-line)))
         (depth (outline-recent-depth)))
    (outline-end-of-current-subtree)
    (if (not (eobp))
	(if (or (not (looking-at "^$"))
		;; A blank line - cut it with this topic *unless* this
		;; is the last topic at this level, in which case
		;; we'll leave the blank line as part of the
		;; containing topic:
		(save-excursion
		  (and (outline-next-heading)
		       (>= (outline-recent-depth) depth))))
	    (forward-char 1)))

    (kill-region beg (point))
    (sit-for 0)
    (save-excursion
      (outline-renumber-to-depth depth))))
;;;_    > outline-yank-processing ()
(defun outline-yank-processing (&optional arg)

  "Incidental outline-specific business to be done just after text yanks.
Does depth adjustment of yanked topics, when:

1 the stuff being yanked starts with a valid outline header prefix, and
2 it is being yanked at the end of a line which consists of only a valid
     topic prefix.

Also, adjusts numbering of subsequent siblings when appropropriate.

Depth adjustment alters the depth of all the topics being yanked
the amount it takes to make the first topic have the depth of the
header into which it's being yanked.

The point is left in front of yanked, adjusted topics, rather than
at the end (and vice-versa with the mark).  Non-adjusted yanks,
however, are left exactly like normal, non-outline-specific yanks."

  (interactive "*P")
					; Get to beginning, leaving
					; region around subject:
  (if (< (mark-marker) (point))
      (exchange-point-and-mark))
  (let* ((subj-beg (point))
	 (subj-end (mark-marker))
	 ;; 'resituate' if yanking an entire topic into topic header:
	 (resituate (and (outline-e-o-prefix-p)
			 (looking-at (concat "\\(" outline-regexp "\\)"))
			 (outline-prefix-data (match-beginning 1)
					      (match-end 1))))
	 ;; 'rectify-numbering' if resituating (where several topics may
	 ;; be resituating) or yanking a topic into a topic slot (bol):
	 (rectify-numbering (or resituate
				(and (bolp) (looking-at outline-regexp)))))
    (if resituate
                                        ; The yanked stuff is a topic:
	(let* ((prefix-len (- (match-end 1) subj-beg))
	       (subj-depth (outline-recent-depth))
	       (prefix-bullet (outline-recent-bullet))
	       (adjust-to-depth
		;; Nil if adjustment unnecessary, otherwise depth to which
		;; adjustment should be made:
		(save-excursion
		  (and (goto-char subj-end)
		       (eolp)
		       (goto-char subj-beg)
		       (and (looking-at outline-regexp)
			    (progn
			      (beginning-of-line)
			      (not (= (point) subj-beg)))
			    (looking-at outline-regexp)
			    (outline-prefix-data (match-beginning 0)
						 (match-end 0)))
		       (outline-recent-depth))))
	       done
	       (more t))
	  (setq rectify-numbering outline-numbered-bullet)
	  (if adjust-to-depth
                                        ; Do the adjustment:
	      (progn
		(message "... yanking") (sit-for 0)
		(save-restriction
		  (narrow-to-region subj-beg subj-end)
                                        ; Trim off excessive blank
                                        ; line at end, if any:
		  (goto-char (point-max))
		  (if (looking-at "^$")
		      (outline-unprotected (delete-char -1)))
                                        ; Work backwards, with each
                                        ; shallowest level,
                                        ; successively excluding the
                                        ; last processed topic from
                                        ; the narrow region:
		  (while more
		    (outline-back-to-current-heading)
                                        ; go as high as we can in each bunch:
		    (while (outline-ascend-to-depth (1- (outline-depth))))
		    (save-excursion
		      (outline-rebullet-topic-grunt (- adjust-to-depth
						       subj-depth))
		      (outline-depth))
		    (if (setq more (not (bobp)))
			(progn (widen)
			       (forward-char -1)
			       (narrow-to-region subj-beg (point))))))
		(message "")
		;; Preserve new bullet if it's a distinctive one, otherwise
		;; use old one:
		(if (string-match (regexp-quote prefix-bullet)
				  outline-distinctive-bullets-string)
                                        ; Delete from bullet of old to
                                        ; before bullet of new:
		    (progn
		      (beginning-of-line)
		      (delete-region (point) subj-beg)
		      (set-marker (mark-marker) subj-end)
		      (goto-char subj-beg)
		      (outline-end-of-prefix))
                                        ; Delete base subj prefix,
                                        ; leaving old one:
		  (delete-region (point) (+ (point)
					    prefix-len
					    (- adjust-to-depth subj-depth)))
                                        ; and delete residual subj
                                        ; prefix digits and space:
		  (while (looking-at "[0-9]") (delete-char 1))
		  (if (looking-at " ") (delete-char 1))))
	    (exchange-point-and-mark))))
    (if rectify-numbering
	(progn
	  (save-excursion
                                        ; Give some preliminary feedback:
	    (message "... reconciling numbers") (sit-for 0)
                                        ; ... and renumber, in case necessary:
	    (goto-char subj-beg)
	    (if (outline-goto-prefix)
		(outline-rebullet-heading nil	;;; solicit
					  (outline-depth) ;;; depth
					  nil	;;; number-control
					  nil	;;; index
					  t))
	    (message ""))))
    (if (not resituate)
      (exchange-point-and-mark))))
;;;_    > outline-yank (&optional arg)
(defun outline-yank (&optional arg)
  "Like yank, with depth and numbering adjustment of yanked topics in
outline mode.  Non-topic yanks work no differntly than normal yanks.

If a topic is being yanked into a bare topic prefix, the depth of the
yanked topic is adjusted to the depth of the topic prefix.

  1 we're yanking in an outline-mode buffer
  2 the stuff being yanked starts with a valid outline header prefix, and
  3 it is being yanked at the end of a line which consists of only a valid
    topic prefix.

If these conditions hold then the depth of the yanked topics are all
adjusted the amount it takes to make the first one at the depth of the
header into which it's being yanked.

The point is left in front of yanked, adjusted topics, rather than
at the end (and vice-versa with the mark).  Non-adjusted yanks,
however, (ones that don't qualify for adjustment) are handled
exactly like normal yanks.

Numbering of yanked topics, and the succesive siblings at the depth
into which they're being yanked, is adjusted.

Outline-yank-pop works with outline-yank just like normal yank-pop
works with normal yank in non-outline buffers."

  (interactive "*P")
  (setq this-command 'yank)
  (yank arg)
  (if (outline-mode-p)
      (outline-yank-processing)))
;;;_    > outline-yank-pop (&optional arg)
(defun outline-yank-pop (&optional arg)
  "Just like yank-pop, but works like outline-yank when popping
topics just after fresh outline prefixes.  Adapts level of popped
stuff to level of fresh prefix.

Note - prefix changes to distinctive bullets will stick, if followed
by pops to non-distinctive yanks.  Bug..."

  (interactive "*p")
  (setq this-command 'yank)
  (yank-pop arg)
  (if (outline-mode-p)
      (outline-yank-processing)))

;;;_  - Specialty bullet functions
;;;_   : File Cross references
;;;_    > outline-resolve-xref ()
(defun outline-resolve-xref ()
  "Pop to file associated with current heading, if it has an xref bullet
\(according to setting of 'outline-file-xref-bullet')."
  (interactive)
  (if (not outline-file-xref-bullet)
      (error
       "outline cross references disabled - no 'outline-file-xref-bullet'")
    (if (not (string= (outline-current-bullet) outline-file-xref-bullet))
        (error "current heading lacks cross-reference bullet '%s'"
               outline-file-xref-bullet)
      (let (file-name)
        (save-excursion
          (let* ((text-start outline-recent-prefix-end)
                 (heading-end (progn (outline-pre-next-preface)
                                     (point))))
            (goto-char text-start)
            (setq file-name
                  (if (re-search-forward "\\s-\\(\\S-*\\)" heading-end t)
                      (buffer-substring (match-beginning 1) (match-end 1))))))
        (setq file-name
              (if (not (= (aref file-name 0) ?:))
                  (expand-file-name file-name)
                                        ; A registry-files ref, strip the ':'
                                        ; and try to follow it:
                (let ((reg-ref (reference-registered-file
                                (substring file-name 1) nil t)))
                  (if reg-ref (car (cdr reg-ref))))))
        (if (or (file-exists-p file-name)
                (if (file-writable-p file-name)
                    (y-or-n-p (format "%s not there, create one? "
                                      file-name))
                  (error "%s not found and can't be created" file-name)))
            (condition-case failure
                (find-file-other-window file-name)
              (error failure))
          (error "%s not found" file-name))
        )
      )
    )
  )
;;;_    > outline-to-entry-end - Unmaintained compatability - ignore this!
;-------------------------------------------------------------------
; Something added solely for use by a "smart menu" package someone got
; off the net.  I have no idea whether this is appropriate code.

(defvar next-entry-exists nil "Used by outline-to-entry-end, dunno why.")
(defun outline-to-entry-end (&optional include-sub-entries curr-entry-level)
  "Go to end of whole entry if optional INCLUDE-SUB-ENTRIES is non-nil.
CURR-ENTRY-LEVEL is an integer representing the length of the current level
string which matched to 'outline-regexp'.  If INCLUDE-SUB-ENTRIES is nil,
CURR-ENTRY-LEVEL is not needed."
  (while (and (setq next-entry-exists
		    (re-search-forward outline-regexp nil t))
	      include-sub-entries
	      (save-excursion
		(beginning-of-line)
		(> (outline-depth) curr-entry-level))))
  (if next-entry-exists
      (progn (beginning-of-line) (point))
    (goto-char (point-max))))

;;; Outline topic prefix and level adjustment funcs:

;;;_ #5 Exposure Control and Processing

;;;_  - Fundamental
;;;_   > outline-flag-region (from to flag)
(defmacro outline-flag-region (from to flag)
  "Hides or shows lines from FROM to TO, according to
emacs selective-display FLAG char.  Ie, text following flag C-m
\(carriage-return) is hidden until the next C-j (newline) char.

Returns nil iff no changes were effected."
  (` (let ((buffer-read-only nil)
	   (outline-override-protect t))
       (subst-char-in-region (, from) (, to)
			     (if (= (, flag) ?\n) ?\r ?\n)
			     (, flag) t))))
;;;_   > outline-flag-current-subtree (flag)
(defun outline-flag-current-subtree (flag)
  (save-excursion
    (outline-back-to-current-heading)
    (outline-flag-region (point)
                         (progn (outline-end-of-current-subtree) (1- (point)))
                         flag)))

;;;_  - Mapping and processing of topics
;;;_   " See also chart functions, in navigation
;;;_   > outline-listify-exposed (&optional start end)
(defun outline-listify-exposed (&optional start end)

  "Produce a list representing exposed topics in current region.
This list can then be used by 'outline-process-exposed' to manipulate
the subject region.

List is composed of elements that may themselves be lists representing
exposed components in subtopic.

Each component list contains:
 - a number representing the depth of the topic,
 - a string representing the header-prefix (ref. 'outline-header-prefix'),
 - a string representing the bullet character,
 - and a series of strings, each containing one line of the exposed
   portion of the topic entry."

  (interactive "r")
  (save-excursion
    (let* (strings pad result depth bullet beg next done) ; State vars.
      (goto-char start)
      (beginning-of-line)
      (if (not (outline-goto-prefix))	; Get initial position within a topic:
	  (outline-next-visible-heading 1))
      (while (and (not done)
		  (not (eobp))		; Loop until we've covered the region.
		  (not (> (point) end)))
	(setq depth (outline-recent-depth) 	; Current topics' depth,
	      bullet (outline-recent-bullet)	; ... bullet,
	      beg (progn (outline-end-of-prefix t) (point))) ; and beginning.
	(setq done			; The boundary for the current topic:
	      (not (outline-next-visible-heading 1)))
	(beginning-of-line)
	(setq next (point))
	(goto-char beg)
	(setq strings nil)
	(while (> next (point))		; Get all the exposed text in
	  (setq strings
		(cons (buffer-substring
		       beg
					;To hidden text or end of line:
		       (progn
			 (search-forward "\r"
					 (save-excursion (end-of-line)
							 (point))
					 1)
			 (if (= (preceding-char) ?\r)
			     (1- (point))
			   (point))))
		      strings))
	  (if (< (point) next)		; Resume from after hid text, if any.
	      (forward-line 1))
	  (setq beg (point)))
	;; Accumulate list for this topic:
	(setq result
	      (cons (append (list depth
				  outline-header-prefix
				  bullet)
			    (nreverse strings))
		    result)))
      ;; Put the list with first at front, to last at back:
      (nreverse result))))
;;;_   > outline-process-exposed (arg &optional tobuf)
(defun outline-process-exposed (&optional func from to frombuf tobuf)
  "Apply FUNCTION \(default 'outline-insert-listified) to exposed
portions FROM position TO position \(default region, or the entire
buffer if no region active) in buffer FROMBUF \(default current
buffer) to buffer TOBUF \(default is buffer named like frombuf but
with \"*\" prepended and \" exposed*\" appended).

The function must as its arguments the elements of the list
representations of topic entries produced by outline-listify-exposed."

					; Resolve arguments,
					; defaulting if necessary:
  (if (not func) (setq func 'outline-insert-listified))
  (if (not (and from to))
      (if mark-active
	  (setq from (region-beginning) to (region-end))
	(setq from (point-min) to (point-max))))
  (if frombuf
      (if (not (bufferp frombuf))
	  ;; Specified but not a buffer - get it:
	  (let ((got (get-buffer frombuf)))
	    (if (not got)
		(error (concat "outline-process-exposed: source buffer "
			       frombuf
			       " not found."))
	      (setq frombuf got))))
    ;; not specified - default it:
    (setq frombuf (current-buffer)))
  (if tobuf
      (if (not (bufferp tobuf))
	  (setq tobuf (get-buffer-create tobuf)))
    ;; not specified - default it:
    (setq tobuf (concat "*" (buffer-name frombuf) " exposed*")))

  (let* ((listified (progn (set-buffer frombuf)
			   (outline-listify-exposed from to)))
	 (prefix outline-header-prefix)	; ... as set in frombuf.
	 curr)
    (set-buffer tobuf)
    (while listified
      (setq curr (car listified))
      (setq listified (cdr listified))
      (apply func (list (car curr)			; depth
			(car (cdr curr))		; header-prefix
			(car (cdr (cdr curr)))		; bullet
			(cdr (cdr (cdr curr))))))	; list of text lines
    (pop-to-buffer tobuf)))

;;;_  - Topic-specific
;;;_   > outline-show-entry ()
; outline-show-entry basically for isearch dynamic exposure, as is...
(defun outline-show-entry ()
  "Like outline-show-current-entry, but reveals an entry that is nested
within hidden topics.

This is a way to give restricted peek at a concealed locality without the
expense of exposing its context, but can leave the outline with aberrant
exposure.  outline-hide-current-entry-completely or outline-show-offshoot
should be used after the peek to rectify the exposure."

  (interactive)
  (save-excursion
    (outline-goto-prefix)
    (outline-flag-region (if (bobp) (point) (1- (point)))
                         (or (outline-pre-next-preface) (point))
			 ?\n)))
;;;_   > outline-show-children (&optional level strict)
(defun outline-show-children (&optional level strict)

  "If point is visible, show all direct subheadings of this heading.
Otherwise, do outline-show-to-offshoot, and then show subheadings.

Optional LEVEL specifies how many levels below the current level
should be shown, or all levels if t.  Default is 1.

Optional STRICT means don't resort to -show-to-offshoot, no matter
what.  This is basically so -show-to-offshoot, which is called by
this function, can employ the pure offspring-revealing capabilities of
it."

  (interactive "p")
  (if (and (not strict)
	   (outline-hidden-p))

      (progn (outline-show-to-offshoot)	; Point's concealed, open to expose it.
	     ;; Then recurse, but with "strict" set so we don't
	     ;; infinite regress:
	     (outline-show-children level t))

    (save-excursion
      (save-restriction
	(let*  ((start-pt (point))
		(chart (outline-chart-subtree))
		(e-o-subtree (point))
		(to-reveal (outline-chart-to-reveal chart (or level 1))))
	  (goto-char start-pt)
	  (if (and strict (= (preceding-char) ?\r))
	      ;; Concealed root would already have been taken care of,
	      ;; unless strict was set.
	      (outline-flag-region (point) (outline-snug-back) ?\n))
	  (while to-reveal
	    (goto-char (car to-reveal))
	    (outline-flag-region (point) (outline-snug-back) ?\n)
	    (setq to-reveal (cdr to-reveal))))))))
;;;_   x outline-show-current-children (&optional level strict)
(defun outline-show-current-children (&optional level strict)
  "This command was misnamed, 'outline-show-children' is the proper
name.  Use it instead.

\(The \"current\" in the name is supposed to imply that it works on
the visible topic containing point, while it really works with respect
to the most immediate topic, concealed or not.  I'll leave this old
name around for a bit, but i'll soon activate an annoying message to
warn people about the change, and then deprecate this alias."

  (interactive "p")
  ;;(beep)
  ;;(message (format "Use '%s' instead of '%s' (%s)."
  ;;		   "outline-show-children"
  ;;		   "outline-show-current-children"
  ;;		   (buffer-name (current-buffer))))
  (outline-show-children level strict))
;;;_   > outline-hide-point-reconcile ()
(defun outline-hide-reconcile ()
  "Like outline-hide-current-entry, but hides completely if contained within
hidden region.

Specifically intended for aberrant exposure states, like entries that were
exposed by outline-show-entry but are within otherwise concealed regions."
  (interactive)
  (save-excursion
    (outline-goto-prefix)
    (outline-flag-region (if (not (bobp)) (1- (point)) (point))
                         (progn (outline-pre-next-preface)
                                (if (= ?\r (following-char))
                                    (point)
                                  (1- (point))))
                         ?\r)))
;;;_   > outline-show-to-offshoot ()
(defun outline-show-to-offshoot ()
  "Like outline-show-entry, but reveals opens all concealed ancestors,
as well.

Like outline-hide-current-entry-completely, useful for rectifying aberrant
exposure states produced by outline-show-entry."

  (interactive)
  (save-excursion
    (let ((orig-pt (point))
	  (orig-pref (outline-goto-prefix))
	  (last-at (point))
	  bag-it)
      (while (or bag-it (= (preceding-char) ?\r))
	(beginning-of-line)
	(if (= last-at (setq last-at (point)))
	    ;; Oops, we're not making any progress!  Show the current
	    ;; topic completely, and bag this try.
	    (progn (beginning-of-line)
		   (outline-show-current-subtree)
		   (goto-char orig-pt)
		   (setq bag-it t)
		   (beep)
		   (message "%s: %s"
			    "outline-show-to-offshoot: "
			    "Aberrant nesting encountered.")))
	(outline-show-children)
	(goto-char orig-pref))
      (goto-char orig-pt)
      (outline-show-entry))))
;;;_   > outline-hide-current-entry ()
(defun outline-hide-current-entry ()
  "Hide the body directly following this heading."
  (interactive)
  (outline-back-to-current-heading)
  (save-excursion
   (outline-flag-region (point)
                        (progn (outline-end-of-current-entry) (point))
                        ?\^M)))
;;;_   > outline-show-current-entry (&optional arg)
(defun outline-show-current-entry (&optional arg)

  "Show body following current heading, or hide the entry if repeat
count."

  (interactive "P")
  (if arg
      (outline-hide-current-entry)
    (save-excursion
      (outline-flag-region (point)
                           (progn (outline-end-of-current-entry) (point))
                           ?\n))))
;;;_   > outline-hide-current-entry-completely ()
; ... outline-hide-current-entry-completely also for isearch dynamic exposure:
(defun outline-hide-current-entry-completely ()
  "Like outline-hide-current-entry, but conceal topic completely.

Specifically intended for aberrant exposure states, like entries that were
exposed by outline-show-entry but are within otherwise concealed regions."
  (interactive)
  (save-excursion
    (outline-goto-prefix)
    (outline-flag-region (if (not (bobp)) (1- (point)) (point))
                         (progn (outline-pre-next-preface)
                                (if (= ?\r (following-char))
                                    (point)
                                  (1- (point))))
                         ?\r)))
;;;_   > outline-show-current-subtree ()
(defun outline-show-current-subtree ()
  "Show everything after this heading at deeper levels."
  (interactive)
  (outline-flag-current-subtree ?\n))
;;;_   > outline-hide-current-subtree (&optional just-close)
(defun outline-hide-current-subtree (&optional just-close)

  "Hide everything after this heading at deeper levels, or if it's
already closed, and optional arg JUST-CLOSE is nil, hide the current
level."

  (interactive)
  (let ((orig-eol (save-excursion
                    (end-of-line)(outline-goto-prefix)(end-of-line)(point))))
    (outline-flag-current-subtree ?\^M)
    (if (and (= orig-eol (save-excursion (goto-char orig-eol)
                                         (end-of-line)
                                         (point)))
             ;; Structure didn't change - try hiding current level:
             (if (not just-close)
                 (outline-up-current-level 1 t)))
        (outline-hide-current-subtree))))
;;;_   > outline-show-current-branches ()
(defun outline-show-current-branches ()
  "Show all subheadings of this heading, but not their bodies."
  (interactive)
  (beginning-of-line)
  (outline-show-children t))
;;;_   > outline-hide-current-leaves ()
(defun outline-hide-current-leaves ()
  "Hide the bodies of the current topic and all its' offspring."
  (interactive)
  (outline-back-to-current-heading)
  (outline-hide-region-body (point) (progn (outline-end-of-current-subtree)
                                           (point))))

;;;_  - Region and beyond
;;;_   > outline-show-all ()
(defun outline-show-all ()
  "Show all of the text in the buffer."
  (interactive)
  (outline-flag-region (point-min) (point-max) ?\n))
;;;_   > outline-hide-bodies ()
(defun outline-hide-bodies ()
  "Hide all of buffer except headings."
  (interactive)
  (outline-hide-region-body (point-min) (point-max)))
;;;_   > outline-hide-region-body (start end)
(defun outline-hide-region-body (start end)
  "Hide all body lines in the region, but not headings."
  (save-excursion
    (save-restriction
      (narrow-to-region start end)
      (goto-char (point-min))
      (while (not (eobp))
	(outline-flag-region (point)
                             (progn (outline-pre-next-preface) (point)) ?\^M)
	(if (not (eobp))
	    (forward-char
	     (if (looking-at "[\n\r][\n\r]")
		 2 1)))))))
;;;_   > outline-expose-topic (spec &optional prev-spec)
(defun outline-expose-topic (spec &optional prev-spec)

  "Dictate wholesale exposure scheme for current level.

Unless you want the args to be evaluated, you probably want to use the
frontend `outline-new-exposure', instead.

Cursor is left at start position.

SPEC is either a number or, recursively, a list.

A simple spec \(either a number, one of a few symbols, or the null
list) dictates the overall exposure for the current topic.

Non null lists are complex specs, designating exposure for the current
topic and its respective siblings.  The ':' repeat spec is used to
specify exposure for any number of successive siblings, up to the
trailing ones for which there are explicit specs following the ':'.

Simple (numeric and null-list) specs are interpreted as follows:

 - Numbers indicate the relative depth to open the corresponding topic.
    - negative numbers force the topic to be closed before opening to the
      absolute value of the number, so all siblings are open only to
      that level.
    - positive numbers open to the relative depth indicated by the
      number, but do not force already opened subtopics to be closed.
    - 0 means to close topic - hide all offspring.
 - ':' 'repeat'
       apply prior element to all siblings at current level, *up to*
       those siblings that would be covered by specs following the ':'
       on the list.  Ie, apply to all topics at level but the last
       ones.  \(Only first of multiple colons at same level is
       respected - subsequent ones are discarded.)
 - '*' completely opens the topic, including bodies.
 - '+' shows all the sub headers, but not the bodies
 - '-' exposes the body and immediate offspring of the corresponding topic.

If the spec is a list, the first element must be a number, which
dictates the exposure depth of the topic as a whole.  Subsequent
elements of the list are nested SPECs, dictating the specific exposure
for the corresponding offspring of the topic.

Examples:
\(outline-expose-topic '(-1 : 0))
	Close this and all following topics at current level, exposing
	only their immediate children, but close down the last topic
	at this current level completely.
\(outline-expose-topic '(-1 () : 1 0))
	Close current topic so only the immediate subtopics are shown;
	show the children in the second to last topic, and completely
	close the last one.
\(outline-expose-topic -2 ': -1 '*))
        Expose children and grandchildren of all topics at current
	level except the last two; expose children of the second to
	last and completely open the last one."

  (interactive "xExposure spec: ")
  (let ((depth (outline-current-depth))
	done
	max-pos)
    (cond ((null spec) nil)
	  ((symbolp spec)
	   (cond ((eq spec '*) (outline-show-current-subtree))
		 ((eq spec '+) (outline-show-current-branches))
		 ((eq spec '-) (outline-show-current-entry))
		 ((eq spec ':)
		  ;; Whoops.  ':' should have been caught at superior
		  ;; level.
		  (error
		   "outline-expose-topic: improper exposure spec - bare ':'"))))
	  ((numberp spec)
	   (if (>= 0 spec)
	       (save-excursion (outline-hide-current-subtree t)
			       (end-of-line)
			       (if (or (not max-pos)
				       (> (point) max-pos))
				   (setq max-pos (point)))
			       (if (> 0 spec)
				   (setq spec (* -1 spec)))))
	   (if (> spec 0)
	     (outline-show-children spec)))
	  ((listp spec)
	   (if (eq (car spec) ':)
	       (setq spec
		     ;; Expand the 'repeat' spec to an explicit version,
		     ;; w.r.t. remaining siblings:
		     (let* (;; Assign rest-spec to preserve first elem in cdr.
			    (rest-spec (delq ': (cdr spec)))
			    ;; residue: # of sibs not covered by remaining spec
			    (residue (- (length (outline-chart-siblings))
					(length rest-spec))))
		       (if (>= 0 residue)
			   ;; remaining spec covers all - just use it:
			   rest-spec
			 ;; cover residue by prev-spec, rest by rest-spec:
			 (nconc (make-list residue prev-spec) rest-spec)))))
	   (setq max-pos (or (outline-expose-topic (car spec) prev-spec)
			     max-pos))
	   (setq prev-spec (car spec))
	   (setq spec (cdr spec))
	   (and
	    (if max-pos
		;; Capitalize on max-pos state to get us nearer next sibling:
		(progn (goto-char (min (point-max) max-pos))
		       (outline-next-heading))
	      (outline-next-sibling depth))
	    (let ((got (outline-expose-topic spec prev-spec)))
	      (if (and got (or (not max-pos) (> got max-pos)))
		  (setq max-pos got))))))
    max-pos))
;;;_   > outline-old-expose-topic (spec &rest followers)
(defun outline-old-expose-topic (spec &rest followers)

  "Dictate wholesale exposure scheme for current topic, according to SPEC.

SPEC is either a number or a list.  Optional successive args
dictate exposure for subsequent siblings of current topic.

A simple spec (either a number, a special symbol, or the null list)
dictates the overall exposure for a topic.  Non null lists are
composite specs whose first element dictates the overall exposure for
a topic, with the subsequent elements in the list interpreted as specs
that dictate the exposure for the successive offspring of the topic.

Simple (numeric and null-list) specs are interpreted as follows:

 - Numbers indicate the relative depth to open the corresponding topic:
  - negative numbers force the topic to be close before opening to the
    absolute value of the number.
  - positive numbers just open to the relative depth indicated by the number.
  - 0 just closes
 - '*' completely opens the topic, including bodies.
 - '+' shows all the sub headers, but not the bodies
 - '-' exposes the body and immediate offspring of the corresponding topic.

If the spec is a list, the first element must be a number, which
dictates the exposure depth of the topic as a whole.  Subsequent
elements of the list are nested SPECs, dictating the specific exposure
for the corresponding offspring of the topic.

Optional FOLLOWER arguments dictate exposure for succeeding siblings."

  (interactive "xExposure spec: ")
  (let ((depth (outline-current-depth))
	done
	max-pos)
    (cond ((null spec) nil)
	  ((symbolp spec)
	   (if (eq spec '*) (outline-show-current-subtree))
	   (if (eq spec '+) (outline-show-current-branches))
	   (if (eq spec '-) (outline-show-current-entry)))
	  ((numberp spec)
	   (if (>= 0 spec)
	       (save-excursion (outline-hide-current-subtree t)
			       (end-of-line)
			       (if (or (not max-pos)
				       (> (point) max-pos))
				   (setq max-pos (point)))
			       (if (> 0 spec)
				   (setq spec (* -1 spec)))))
	   (if (> spec 0)
	     (outline-show-children spec)))
	  ((listp spec)
	   ;(let ((got (outline-old-expose-topic (car spec))))
	   ;  (if (and got (or (not max-pos) (> got max-pos)))
	   ;	 (setq max-pos got)))
	   (let ((new-depth  (+ (outline-current-depth) 1))
		 got)
	     (setq max-pos (outline-old-expose-topic (car spec)))
	     (setq spec (cdr spec))
	     (if (and spec
		      (outline-descend-to-depth new-depth)
		      (not (outline-hidden-p)))
		 (progn (setq got (apply 'outline-old-expose-topic spec))
			(if (and got (or (not max-pos) (> got max-pos)))
			    (setq max-pos got)))))))
    (while (and followers
		(progn (if (and max-pos (< (point) max-pos))
			   (progn (goto-char max-pos)
				  (setq max-pos nil)))
		       (end-of-line)
		       (outline-next-sibling depth)))
      (outline-old-expose-topic (car followers))
      (setq followers (cdr followers)))
    max-pos))
;;;_   > outline-new-exposure '()
(defmacro outline-new-exposure (&rest spec)
  "Literal frontend for `outline-expose-topic', doesn't evaluate arguments.
All arguments that would need to be quoted in outline-expose-topic need not
be in outline-exposure.

Cursor is left at start position.

Use this instead of obsolete 'outline-exposure'.

Examples:
\(outline-exposure (-1 () () () 1) 0)
	Close current topic at current level so only the immediate
	subtopics are shown, except also show the children of the
	third subtopic; and close the next topic at the current level.
\(outline-exposure : -1 0)
	Close all topics at current level to expose only their
	immediate children, except for the last topic at the current
	level, in which even its' immediate children are hidden.
\(outline-exposure -2 : -1 *)
        Expose children and grandchildren of first topic at current
	level, and expose children of subsequent topics at current
	level *except* for the last, which should be opened completely."
  (list 'save-excursion
	'(if (not (or (outline-goto-prefix)
		      (outline-next-heading)))
	     (error "outline-exposure: Can't find any outline topics."))
	(list 'outline-expose-topic (list 'quote spec))))
;;;_   > outline-exposure '()
(defmacro outline-exposure (&rest spec)
  "Being deprecated - use more recent 'outline-new-exposure' instead.

Literal frontend for `outline-old-expose-topic', doesn't evaluate arguments
and retains start position."
  (list 'save-excursion
	'(if (not (or (outline-goto-prefix)
		      (outline-next-heading)))
	     (error "Can't find any outline topics."))
	(cons 'outline-old-expose-topic
	      (mapcar '(lambda (x) (list 'quote x)) spec))))

;;;_ #6 Search with Dynamic Exposure (requires v19 isearch or isearch-mode)
;;;_  = outline-search-reconceal
(defvar outline-search-reconceal nil
  "Used for outline isearch provisions, to track whether current search
match was concealed outside of search.  The value is the location of the
match, if it was concealed, regular if the entire topic was concealed, in
a list if the entry was concealed.")
;;;_  = outline-search-quitting
(defconst outline-search-quitting nil
  "Variable used by isearch-terminate/outline-provisions and
isearch-done/outline-provisions to distinguish between a conclusion
and cancellation of a search.")


;;;_  > outline-enwrap-isearch ()
(defun outline-enwrap-isearch ()
  "Impose isearch-mode wrappers so isearch progressively exposes and
reconceals hidden topics when working in outline mode, but works
elsewhere.

The function checks to ensure that the rebindings are done only once."

                                        ; Should isearch-mode be employed,
  (if (or (not outline-enwrap-isearch-mode)
                                        ; or are preparations already done?
          (fboundp 'real-isearch-terminate))

      ;; ... no - skip this all:
      nil

    ;; ... yes:

                                        ; Ensure load of isearch-mode:
    (if (or (and (fboundp 'isearch-mode)
                 (fboundp 'isearch-quote-char))
            (condition-case error
                (load-library outline-enwrap-isearch-mode)
              (file-error (message "Skipping isearch-mode provisions - %s '%s'"
                                   (car (cdr error))
                                   (car (cdr (cdr error))))
                          (sit-for 1)
                          ;; Inhibit subsequent tries and return nil:
                          (setq outline-enwrap-isearch-mode nil))))
        ;; Isearch-mode loaded, encapsulate specific entry points for
        ;; outline dynamic-exposure business:
        (progn

                                        ; stash crucial isearch-mode
                                        ; funcs under known, private
                                        ; names, then register wrapper
                                        ; functions under the old
                                        ; names, in their stead:
                                        ; 'isearch-quit' is pre v 1.2:
          (fset 'real-isearch-terminate
                                        ; 'isearch-quit is pre v 1.2:
                (or (if (fboundp 'isearch-quit)
                        (symbol-function 'isearch-quit))
                    (if (fboundp 'isearch-abort)
                                        ; 'isearch-abort' is v 1.2 and on:
                        (symbol-function 'isearch-abort))))
          (fset 'isearch-quit 'isearch-terminate/outline-provisions)
          (fset 'isearch-abort 'isearch-terminate/outline-provisions)
          (fset 'real-isearch-done (symbol-function 'isearch-done))
          (fset 'isearch-done 'isearch-done/outline-provisions)
          (fset 'real-isearch-update (symbol-function 'isearch-update))
          (fset 'isearch-update 'isearch-update/outline-provisions)
          (make-variable-buffer-local 'outline-search-reconceal)))))
;;;_  > outline-isearch-arrival-business ()
(defun outline-isearch-arrival-business ()
  "Do outline business like exposing current point, if necessary,
registering reconcealment requirements in outline-search-reconceal
accordingly.

Set outline-search-reconceal to nil if current point is not
concealed, to value of point if entire topic is concealed, and a
list containing point if only the topic body is concealed.

This will be used to determine whether outline-hide-current-entry
or outline-hide-current-entry-completely will be necessary to
restore the prior concealment state."

  (if (outline-mode-p)
      (setq outline-search-reconceal
            (if (outline-hidden-p)
                (save-excursion
                  (if (re-search-backward outline-line-boundary-regexp nil 1)
                      ;; Nil value means we got to b-o-b - wouldn't need
                      ;; to advance.
                      (forward-char 1))
                                        ; We'll return point or list
                                        ; containing point, depending
                                        ; on concealment state of
                                        ; topic prefix.
                  (prog1 (if (outline-hidden-p) (point) (list (point)))
                                        ; And reveal the current
                                        ; search target:
                    (outline-show-entry)))))))
;;;_  > outline-isearch-advancing-business ()
(defun outline-isearch-advancing-business ()
  "Do outline business like deexposing current point, if necessary,
according to reconceal state registration."
  (if (and (outline-mode-p) outline-search-reconceal)
      (save-excursion
        (if (listp outline-search-reconceal)
            ;; Leave the topic visible:
            (progn (goto-char (car outline-search-reconceal))
                   (outline-hide-current-entry))
          ;; Rehide the entire topic:
          (goto-char outline-search-reconceal)
          (outline-hide-current-entry-completely)))))
;;;_  > isearch-terminate/outline-provisions ()
(defun isearch-terminate/outline-provisions ()
  (interactive)
    (if (and (outline-mode-p) outline-enwrap-isearch-mode)
        (outline-isearch-advancing-business))
    (let ((outline-search-quitting t)
          (outline-search-reconceal nil))
      (real-isearch-terminate)))
;;;_  > isearch-done/outline-provisions ()
(defun isearch-done/outline-provisions (&optional nopush)
  (interactive)
  (if (and (outline-mode-p) outline-enwrap-isearch-mode)
      (progn (if (and outline-search-reconceal
		      (not (listp outline-search-reconceal)))
		 ;; The topic was concealed - reveal it, its siblings,
		 ;; and any ancestors that are still concealed:
		 (save-excursion
		   (message "(exposing destination)")(sit-for 0)
		   (outline-goto-prefix)
					; There may be a closed blank
					; line between prior and
					; current topic that would be
					; missed - provide for it:
		   (if (not (bobp))
		       (progn (forward-char -1) ; newline
			      (if (eq ?\r (preceding-char))
				  (outline-flag-region (1- (point))
						       (point)
						       ?\n))
			      (forward-char 1)))
					; Goto parent
		   (outline-ascend-to-depth (1- (outline-recent-depth)))
		   (outline-show-children)))
	     (if (and (boundp 'outline-search-quitting)
		      outline-search-quitting)
		 nil
					; We're concluding abort:
	       (outline-isearch-arrival-business)
	       (outline-show-children))))
  (if nopush
      ;; isearch-done in newer version of isearch mode takes arg:
      (real-isearch-done nopush)
    (real-isearch-done)))
;;;_  > isearch-update/outline-provisions ()
(defun isearch-update/outline-provisions ()
  "Wrapper around isearch which exposes and conceals hidden outline
portions encountered in the course of searching."
  (if (not (and (outline-mode-p) outline-enwrap-isearch-mode))
      ;; Just do the plain business:
      (real-isearch-update)

    ;; Ah - provide for outline conditions:
    (outline-isearch-advancing-business)
    (real-isearch-update)
    (cond (isearch-success (outline-isearch-arrival-business))
          ((not isearch-success) (outline-isearch-advancing-business)))))

;;;_ #7 Copying and printing

;;;_  - Copy exposed
;;;_   > outline-insert-listified (depth prefix bullet text)
(defun outline-insert-listified (depth prefix bullet text)
  (insert-string (concat (if (> depth 1) prefix "")
			 (make-string (1- depth) ?\ )
			 bullet))
  (while text
    (insert-string (car text))
    (if (setq text (cdr text))
	(insert-string "\n")))
  (insert-string "\n"))
;;;_   > outline-copy-exposed (arg &optional tobuf)
(defun outline-copy-exposed (arg &optional tobuf)
  "Duplicate exposed portions of current topic to buffer with
current buffers' name with \" exposed\" appended to it.

With repeat count, copy the exposed portions of entire buffer."

  (interactive "P")
  (if (not tobuf)
      (setq tobuf (get-buffer-create (concat "*" (buffer-name) " exposed*"))))
  (let* ((start-pt (point))
	 (beg (if arg (point-min) (outline-back-to-current-heading)))
	 (end (if arg (point-max) (outline-end-of-current-subtree)))
	 (buf (current-buffer)))
    (save-excursion (set-buffer tobuf)(erase-buffer))
    (outline-process-exposed 'outline-insert-listified
			     beg
			     end
			     (current-buffer)
			     tobuf)
    (goto-char (point-min))
    (pop-to-buffer buf)
    (goto-char start-pt)))

;;;_  - LaTeX formatting
;;;_   > outline-latex-verb-quote (str &optional flow)
(defun outline-latex-verb-quote (str &optional flow)
  "Return copy of STRING which expresses the original characters
\(including carriage returns) of the string across latex processing."
  (mapconcat '(lambda (char)
       ;;;mess: (cond ((memq char '(?"" ?$ ?% ?# ?& ?- ?" ?` ?^ ?- ?*));;;"))))
		(cond ((memq char '(?\\ ?$ ?% ?# ?& ?{ ?} ?_ ?^ ?- ?*))
		       (concat "\\char" (number-to-string char) "{}"))
		      ((= char ?\n) "\\\\")
		      (t (char-to-string char))))
	     str
	     ""))
;;;_   > outline-latex-verbatim-quote-curr-line ()
(defun outline-latex-verbatim-quote-curr-line ()
  "Adjust line contents so it is unaltered \(from the original line)
across latex processing, within the context of a 'verbatim'
environment.  Leaves point at the end of the line."
  (beginning-of-line)
  (let ((beg (point))
	(end (progn (end-of-line)(point))))
    (goto-char beg)
    (while (re-search-forward "\\\\"
	    ;;"\\\\\\|\\{\\|\\}\\|\\_\\|\\$\\|\\\"\\|\\&\\|\\^\\|\\-\\|\\*\\|#"
			      end	; bounded by end-of-line
			      1)	; no matches, move to end & return nil
      (goto-char (match-beginning 0))
      (insert-string "\\")
      (setq end (1+ end))
      (goto-char (1+ (match-end 0))))))
;;;_   > outline-insert-latex-header (buf)
(defun outline-insert-latex-header (buf)
  "Insert initial latex commands at point in BUFFER."
  ;; Much of this is being derived from the stuff in appendix of E in
  ;; the TeXBook, pg 421.
  (set-buffer buf)
  (let ((doc-style (format "\n\\documentstyle{%s}\n"
			   "report"))
	(page-numbering (if outline-number-pages
			    "\\pagestyle{empty}\n"
			  ""))
	(linesdef (concat "\\def\\beginlines{"
			  "\\par\\begingroup\\nobreak\\medskip"
			  "\\parindent=0pt\n"
			  " \\kern1pt\\nobreak \\obeylines \\obeyspaces "
			  "\\everypar{\\strut}}\n"
			  "\\def\\endlines{"
			  "\\kern1pt\\endgroup\\medbreak\\noindent}\n"))
	(titlecmd (format "\\newcommand{\\titlecmd}[1]{{%s #1}}\n"
			  outline-title-style))
	(labelcmd (format "\\newcommand{\\labelcmd}[1]{{%s #1}}\n"
			  outline-label-style))
	(headlinecmd (format "\\newcommand{\\headlinecmd}[1]{{%s #1}}\n"
			     outline-head-line-style))
	(bodylinecmd (format "\\newcommand{\\bodylinecmd}[1]{{%s #1}}\n"
			     outline-body-line-style))
	(setlength (format "%s%s%s%s"
			   "\\newlength{\\stepsize}\n"
			   "\\setlength{\\stepsize}{"
			   outline-indent
			   "}\n"))
	(oneheadline (format "%s%s%s%s%s%s%s"
			     "\\newcommand{\\OneHeadLine}[3]{%\n"
			     "\\noindent%\n"
			     "\\hspace*{#2\\stepsize}%\n"
			     "\\labelcmd{#1}\\hspace*{.2cm}"
			     "\\headlinecmd{#3}\\\\["
			     outline-line-skip
			     "]\n}\n"))
	(onebodyline (format "%s%s%s%s%s%s"
			       "\\newcommand{\\OneBodyLine}[2]{%\n"
			       "\\noindent%\n"
			       "\\hspace*{#1\\stepsize}%\n"
			       "\\bodylinecmd{#2}\\\\["
			       outline-line-skip
			       "]\n}\n"))
	(begindoc "\\begin{document}\n\\begin{center}\n")
	(title (format "%s%s%s%s"
		       "\\titlecmd{"
		       (outline-latex-verb-quote (if outline-title
						(condition-case err
						    (eval outline-title)
						  (error "<unnamed buffer>"))
					      "Unnamed Outline"))
		       "}\n"
		       "\\end{center}\n\n"))
	(hsize "\\hsize = 7.5 true in\n")
	(hoffset "\\hoffset = -1.5 true in\n")
	(vspace "\\vspace{.1cm}\n\n"))
    (insert (concat doc-style
		    page-numbering
		    titlecmd
		    labelcmd
		    headlinecmd
		    bodylinecmd
		    setlength
		    oneheadline
		    onebodyline
		    begindoc
		    title
		    hsize
		    hoffset
		    vspace)
	    )))
;;;_   > outline-insert-latex-trailer (buf)
(defun outline-insert-latex-trailer (buf)
  "Insert concluding latex commands at point in BUFFER."
  (set-buffer buf)
  (insert "\n\\end{document}\n"))
;;;_   > outline-latexify-one-item (depth prefix bullet text)
(defun outline-latexify-one-item (depth prefix bullet text)
  "Insert LaTeX commands for formatting one item - a topic header and
its' body - of an outline.  Args are the topics' numeric DEPTH, the
header PREFIX lead string, the BULLET string, and a list of TEXT
strings for the body."
  (let* ((head-line (if text (car text)))
	 (body-lines (cdr text))
	 (curr-line)
	 body-content bop)
					; Do the head line:
    (insert-string (concat "\\OneHeadLine{\\verb\1 "
			   (outline-latex-verb-quote bullet)
			   "\1}{"
			   depth
			   "}{\\verb\1 "
			   (if head-line
			       (outline-latex-verb-quote head-line)
			     "")
			   "\1}\n"))
    (if (not body-lines)
	nil
      ;;(insert-string "\\beginlines\n")
      (insert-string "\\begin{verbatim}\n")
      (while body-lines
	(setq curr-line (car body-lines))
	(if (and (not body-content)
		 (not (string-match "^\\s-*$" curr-line)))
	    (setq body-content t))
					; Mangle any occurrences of
					; "\end{verbatim}" in text,
					; it's special:
	(if (and body-content
		 (setq bop (string-match "\\end{verbatim}" curr-line)))
	    (setq curr-line (concat (substring curr-line 0 bop)
				    ">"
				    (substring curr-line bop))))
	;;(insert-string "|" (car body-lines) "|")
	(insert-string curr-line)
	(outline-latex-verbatim-quote-curr-line)
	(insert-string "\n")
	(setq body-lines (cdr body-lines)))
      (if body-content
	  (setq body-content nil)
	(forward-char -1)
	(insert-string "\\ ")
	(forward-char 1))
      ;;(insert-string "\\endlines\n")
      (insert-string "\\end{verbatim}\n")
      )))
;;;_   > outline-latexify-exposed (arg &optional tobuf)
(defun outline-latexify-exposed (arg &optional tobuf)
  "Copy exposed portions of current topic to TOBUF, formatted for
latex processing.  tobuf defaults to a buffer named the same as the
current buffer, but with \"*\" prepended and \" latex-formed*\"
appended.

With repeat count, copy the exposed portions of entire buffer."

  (interactive "P")
  (if (not tobuf)
      (setq tobuf
	    (get-buffer-create (concat "*" (buffer-name) " latexified*"))))
  (let* ((start-pt (point))
	 (beg (if arg (point-min) (outline-back-to-current-heading)))
	 (end (if arg (point-max) (outline-end-of-current-subtree)))
	 (buf (current-buffer)))
    (set-buffer tobuf)
    (erase-buffer)
    (outline-insert-latex-header tobuf)
    (goto-char (point-max))
    (outline-process-exposed 'outline-latexify-one-item
			     beg
			     end
			     buf
			     tobuf)
    (goto-char (point-max))
    (outline-insert-latex-trailer tobuf)
    (goto-char (point-min))
    (pop-to-buffer buf)
    (goto-char start-pt)))


;;;_ #8 miscellaneous
;;;_  > outline-mark-topic ()
(defun outline-mark-topic ()
  "Put the region around topic currently containing point."
  (interactive)
  (beginning-of-line)
  (outline-goto-prefix)
  (push-mark (point))
  (outline-end-of-current-subtree)
  (exchange-point-and-mark))
;;;_  > outlineify-sticky ()
(defun outlineify-sticky (&optional arg)
  "Activate outline mode and establish file eval to set initial exposure.

Invoke with a string argument to designate a string to prepend to
topic prefixs, or with a universal argument to be prompted for the
string to be used.  Suitable defaults are provided for lisp,
emacs-lisp, c, c++, awk, sh, csh, and perl modes."

  (interactive "P") (outline-mode t)


  (let ((leader-cell (assoc major-mode outline-mode-leaders)))
    (cond (arg (if (stringp arg)
		   ;; Use arg as the header-prefix:
		   (outline-lead-with-comment-string arg)
		 ;; Otherwise, let function solicit string:
		 (setq arg (outline-lead-with-comment-string))))

	  (leader-cell
	   (outline-lead-with-comment-string (cdr leader-cell))
	   (setq arg (cdr leader-cell)))))

  (let* ((lead-prefix (format "%s%s"
                              (concat outline-header-prefix (if arg " " ""))
                              outline-primary-bullet))
         (lead-line (format "%s%s %s\n%s %s\n  %s %s %s"
                            (if arg outline-header-prefix "")
                            outline-primary-bullet
                            "Local emacs vars."
                            "'(This topic sets initial outline exposure"
                            "of the file when loaded by emacs,"
                            "Encapsulate it in comments if"
                            "file is a program"
                            "otherwise ignore it,")))

    (save-excursion
                                        ; Put a topic at the top, if
                                        ; none there already:
      (goto-char (point-min))
      (if (not (looking-at outline-regexp))
          (insert-string
           (if (not arg) outline-primary-bullet
             (format "%s%s\n" outline-header-prefix outline-primary-bullet))))

                                        ; File-vars stuff, at the bottom:
      (goto-char (point-max))
                                        ; Insert preamble:
      (insert-string (format "\n\n%s\n%s %s %s\n%s %s\n"
                             lead-line
                             lead-prefix
                             "local"
                             "variables:"
                             lead-prefix
                             "eval:"))
                                        ; Insert outline-mode activation:
      (insert-string
       (format "\t     %s\n\t\t%s\n\t\t\t%s\n"
               "(condition-case err"
               "(save-excursion"
               "(outline-mode t)"))
                                        ; Conditionally insert prefix
                                        ; leader customization:
      (if arg (insert-string (format "\t\t\t(%s \"%s\")\n"
                                     "outline-lead-with-comment-string"
                                     arg)))
                                        ; Insert ammouncement and
                                        ; exposure control:
      (insert-string
       (format "\t\t\t%s %s\n\t\t\t%s %s\n\t\t%s %s"
               "(message \"Adjusting '%s' exposure\""
               "(buffer-name))"
               "(goto-char 0)"
               "(outline-exposure -1 0))"
               "(error (message "
               "\"Failed file var 'allout' provisions\")))"))
                                        ; Insert postamble:
      (insert-string (format "\n%s End:\n)\n"
                             lead-prefix)))))
;;;_  > solicit-char-in-string (prompt string &optional do-defaulting)
(defun solicit-char-in-string (prompt string &optional do-defaulting)
  "Solicit (with first arg PROMPT) choice of a character from string STRING.

Optional arg DO-DEFAULTING indicates to accept empty input (CR)."

  (let ((new-prompt prompt)
        got)

    (while (not got)
      (message "%s" new-prompt)

      ;; We do our own reading here, so we can circumvent, eg, special
      ;; treatment for '?' character.  (Might oughta change minibuffer
      ;; keymap instead, oh well.)
      (setq got
            (char-to-string (let ((cursor-in-echo-area nil)) (read-char))))

      (if (null (string-match (regexp-quote got) string))
          (if (and do-defaulting (string= got "\^M"))
              ;; We're defaulting, return null string to indicate that:
              (setq got "")
            ;; Failed match and not defaulting,
            ;; set the prompt to give feedback,
            (setq new-prompt (concat prompt
                                     got
                                     " ...pick from: "
                                     string
                                     ""))
            ;; and set loop to try again:
            (setq got nil))
        ;; Got a match - give feedback:
        (message "")))
    ;; got something out of loop - return it:
    got)
  )
;;;_  > regexp-sans-escapes (string)
(defun regexp-sans-escapes (regexp &optional successive-backslashes)
  "Return a copy of REGEXP with all character escapes stripped out.
Representations of actual backslashes - '\\\\\\\\' - are left as a
single backslash.

Optional arg SUCCESSIVE-BACKSLASHES is used internally for recursion."

  (if (string= regexp "")
      ""
    ;; Set successive-backslashes to number if current char is
    ;; backslash, or else to nil:
    (setq successive-backslashes
	  (if (= (aref regexp 0) ?\\)
	      (if successive-backslashes (1+ successive-backslashes) 1)
	    nil))
    (if (or (not successive-backslashes) (= 2 successive-backslashes))
	;; Include first char:
	(concat (substring regexp 0 1)
		(regexp-sans-escapes (substring regexp 1)))
      ;; Exclude first char, but maintain count:
      (regexp-sans-escapes (substring regexp 1) successive-backslashes))))
;;;_  - add-hook definition for v18
;;;_   > add-hook (hook function &optional append)
(if (not (fboundp 'add-hook))
    (defun add-hook (hook function &optional append)
      "Add to the value of HOOK the function FUNCTION unless already present (it
becomes the first hook on the list unless optional APPEND is non-nil, in
which case it becomes the last).  HOOK should be a symbol, and FUNCTION may be
any valid function.  HOOK's value should be a list of functions, not a single
function.  If HOOK is void, it is first set to nil."
      (or (boundp hook) (set hook nil))
      (or (if (consp function)
	      ;; Clever way to tell whether a given lambda-expression
	      ;; is equal to anything in the hook.
	      (let ((tail (assoc (cdr function) (symbol-value hook))))
		(equal function tail))
	    (memq function (symbol-value hook)))
	  (set hook
	       (if append
		   (nconc (symbol-value hook) (list function))
		 (cons function (symbol-value hook)))))))

;;;_ #9 Under development
;;;_  > outline-bullet-isearch (&optional bullet)
(defun outline-bullet-isearch (&optional bullet)
  "Isearch \(regexp\) for topic with bullet BULLET."
  (interactive)
  (if (not bullet)
      (setq bullet (solicit-char-in-string
		    "ISearch for topic with bullet: "
		    (regexp-sans-escapes outline-bullets-string))))

  (let ((isearch-regexp t)
	(isearch-string (concat "^"
				outline-header-prefix
				"[ \t]*"
				bullet)))
    (isearch-repeat 'forward)
    (isearch-mode t)))
;;;_  - Re hooking up with isearch - use isearch-op-fun rather than
	 wrapping the isearch functions.

;;;_* Local emacs vars.
'(
Local variables:
eval: (save-excursion
        (if (not (condition-case err (outline-mode t)
                   (wrong-number-of-arguments nil)))
            (progn
              (message
               "Allout outline-mode not loaded, not adjusting buffer exposure")
              (sit-for 1))
          (message "Adjusting '%s' exposure" (buffer-name))
          (outline-lead-with-comment-string "\;\;\;_")
          (goto-char 0)
          (outline-new-exposure 0 : -1 -1 0)))
End:)
author	Richard M. Stallman <rms@gnu.org>
date	Sat, 30 Apr 1994 20:15:08 +0000
parents	49f9f9a08b4c
children	4996c50431de