view etc/ps-prin1.ps @ 34414:158463f1a26e

(gnus-summary-recenter): When trying to keep the bottom line visible, check to see if it's partially obscured, and if so, either scroll one more line to make it fully visible, or revert to showing the second line from the top.

% === BEGIN ps-print prologue 1
% version: 6.0

% ISOLatin1Encoding stolen from ps_init.ps in GhostScript 2.6.1.4:
/ISOLatin1Encoding where{pop}{
% -- The ISO Latin-1 encoding vector isn't known, so define it.
% -- The first half is the same as the standard encoding,
% -- except for minus instead of hyphen at code 055.
/ISOLatin1Encoding
StandardEncoding 0 45 getinterval aload pop
    /minus
StandardEncoding 46 82 getinterval aload pop
%*** NOTE: the following are missing in the Adobe documentation,
%*** but appear in the displayed table:
%*** macron at 0225, dieresis at 0230, cedilla at 0233, space at 0240.
% 0200 (128)
    /.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef
    /.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef
    /dotlessi/grave/acute/circumflex/tilde/macron/breve/dotaccent
    /dieresis/.notdef/ring/cedilla/.notdef/hungarumlaut/ogonek/caron
% 0240 (160)
    /space/exclamdown/cent/sterling
	/currency/yen/brokenbar/section
    /dieresis/copyright/ordfeminine/guillemotleft
	/logicalnot/hyphen/registered/macron
    /degree/plusminus/twosuperior/threesuperior
	/acute/mu/paragraph/periodcentered
    /cedilla/onesuperior/ordmasculine/guillemotright
	/onequarter/onehalf/threequarters/questiondown
% 0300 (192)
    /Agrave/Aacute/Acircumflex/Atilde
	/Adieresis/Aring/AE/Ccedilla
    /Egrave/Eacute/Ecircumflex/Edieresis
	/Igrave/Iacute/Icircumflex/Idieresis
    /Eth/Ntilde/Ograve/Oacute
	/Ocircumflex/Otilde/Odieresis/multiply
    /Oslash/Ugrave/Uacute/Ucircumflex
	/Udieresis/Yacute/Thorn/germandbls
% 0340 (224)
    /agrave/aacute/acircumflex/atilde
	/adieresis/aring/ae/ccedilla
    /egrave/eacute/ecircumflex/edieresis
	/igrave/iacute/icircumflex/idieresis
    /eth/ntilde/ograve/oacute
	/ocircumflex/otilde/odieresis/divide
    /oslash/ugrave/uacute/ucircumflex
	/udieresis/yacute/thorn/ydieresis
256 packedarray def
}ifelse

/reencodeFontISO{ %def
  dup
  length 12 add dict	% Make a new font (a new dict the same size
			% as the old one) with room for our new symbols.

  begin			% Make the new font the current dictionary.

    % Copy each of the symbols from the old dictionary
    % to the new one except for the font ID.
    {1 index/FID ne{def}{pop pop}ifelse}forall

    % Override the encoding with the ISOLatin1 encoding.
    currentdict/FontType get 0 ne{/Encoding ISOLatin1Encoding def}if

    % Use the font's bounding box to determine the ascent, descent,
    % and overall height; don't forget that these values have to be
    % transformed using the font's matrix.

%          ^    (x2 y2)
%          |       |
%          |       v
%          |  +----+ - -
%          |  |    |   ^
%          |  |    |   | Ascent (usually > 0)
%          |  |    |   |
% (0 0) -> +--+----+-------->
%             |    |   |
%             |    |   v Descent (usually < 0)
% (x1 y1) --> +----+ - -

    currentdict/FontType get 0 ne
    {/FontBBox load aload pop			% -- x1 y1 x2 y2
     FontMatrix transform/Ascent  exch def pop
     FontMatrix transform/Descent exch def pop}
    {/PrimaryFont FDepVector 0 get def
     PrimaryFont/FontBBox get aload pop
     PrimaryFont/FontMatrix get transform/Ascent exch def pop
     PrimaryFont/FontMatrix get transform/Descent exch def pop}ifelse

    /FontHeight Ascent Descent sub def	% use `sub' because descent < 0

    % Define these in case they're not in the FontInfo
    % (also, here they're easier to get to).
    /UnderlinePosition  Descent 0.70 mul def
    /OverlinePosition   Descent UnderlinePosition sub Ascent add def
    /StrikeoutPosition  Ascent 0.30 mul def
    /LineThickness      FontHeight 0.05 mul def
    /Xshadow            FontHeight  0.08 mul def
    /Yshadow            FontHeight -0.09 mul def
    /SpaceBackground    Descent neg UnderlinePosition add def
    /XBox               Descent neg def
    /YBox               LineThickness 0.7 mul def

    currentdict		% Leave the new font on the stack
    end			% Stop using the font as the current dictionary.
    definefont		% Put the font into the font dictionary
    pop			% Discard the returned font.
}bind def

% Font definition
/DefFont{findfont exch scalefont reencodeFontISO}def

% Font selection
/F{
  findfont
  dup/Ascent            get/Ascent            exch def
  dup/Descent           get/Descent           exch def
  dup/FontHeight        get/FontHeight        exch def
  dup/UnderlinePosition get/UnderlinePosition exch def
  dup/OverlinePosition  get/OverlinePosition  exch def
  dup/StrikeoutPosition get/StrikeoutPosition exch def
  dup/LineThickness     get/LineThickness     exch def
  dup/Xshadow           get/Xshadow           exch def
  dup/Yshadow           get/Yshadow           exch def
  dup/SpaceBackground   get/SpaceBackground   exch def
  dup/XBox              get/XBox              exch def
  dup/YBox              get/YBox              exch def
  setfont
}def

/FG/setrgbcolor load def

/bg false def
/BG{
  dup/bg exch def
  {[4 1 roll]}
  {[1.0 1.0 1.0]}
  ifelse
  /bgcolor exch def
}def

%  B    width    C
%   +-----------+
%               | Ascent  (usually > 0)
% A +           +
%               | Descent (usually < 0)
%   +-----------+
%  E    width    D

/dobackground{				% width --
  currentpoint				% -- width x y
  gsave
    newpath
    moveto				% A (x y)
    0 Ascent rmoveto			% B
    dup 0 rlineto			% C
    0 Descent Ascent sub rlineto	% D
    neg 0 rlineto			% E
    closepath
    FillBgColor
  grestore
}def

/eolbg{					% dobackground until right margin
  PrintWidth				% -- x-eol
  currentpoint pop			% -- cur-x
  sub					% -- width until eol
  dobackground
}def

/PSL{bg{eolbg}if  0  currentpoint exch pop LineHeight sub  moveto}def
/PLN{PrintLineNumber{doLineNumber}if}def

/SL{PSL isLineStep pop}def		% Soft Linefeed

/HL{PSL PLN}def				% Hard Linefeed

% Some debug
/dcp{currentpoint exch 40 string cvs print(, )print =}def
/dp{print 2 copy  exch 40 string cvs print(, )print =}def

/W{
  ( )stringwidth	% Get the width of a space in the current font.
  pop			% Discard the Y component.
  mul			% Multiply the width of a space
			% by the number of spaces to plot
  bg{dup dobackground}if
  0 rmoveto
}def

/Effect 0 def
/EF{/Effect exch def}def

% stack:  string  |-  --
% effect: 1  - underline  2   - strikeout  4  - overline
%         8  - shadow     16  - box        32 - outline
/S{
  /xx currentpoint dup Descent add/yy exch def
  Ascent add/YY exch def def
  dup stringwidth pop xx add/XX exch def
  Effect 8 and 0 ne{
    /yy yy Yshadow add def
    /XX XX Xshadow add def
  }if
  bg{
    true
    Effect 16 and 0 ne
      {SpaceBackground doBox}
      {xx yy XX YY doRect}
    ifelse
  }if						% background
  Effect 16 and 0 ne{false 0 doBox}if		% box
  Effect 8  and 0 ne{dup doShadow}if		% shadow
  Effect 32 and 0 ne
    {true doOutline}				% outline
    {show}					% normal text
  ifelse
  Effect 1  and 0 ne{UnderlinePosition Hline}if	% underline
  Effect 2  and 0 ne{StrikeoutPosition Hline}if	% strikeout
  Effect 4  and 0 ne{OverlinePosition  Hline}if	% overline
}bind def

% stack:  position  |-  --
/Hline{
  currentpoint exch pop add dup
  gsave
  newpath
  xx exch moveto
  XX exch lineto
  closepath
  LineThickness setlinewidth stroke
  grestore
}bind def

% stack:  fill-or-not delta  |-  --
/doBox{
  /dd exch def
  xx XBox sub dd sub yy YBox sub dd sub
  XX XBox add dd add YY YBox add dd add
  doRect
}bind def

% stack:  fill-or-not lower-x lower-y upper-x upper-y  |-  --
/doRect{
  /rYY exch def
  /rXX exch def
  /ryy exch def
  /rxx exch def
  gsave
  newpath
  rXX rYY moveto
  rxx rYY lineto
  rxx ryy lineto
  rXX ryy lineto
  closepath
  % top of stack: fill-or-not
  {FillBgColor}
  {LineThickness setlinewidth stroke}ifelse
  grestore
}bind def

% stack:  string  |-  --
/doShadow{
  gsave
  Xshadow Yshadow rmoveto
  false doOutline
  grestore
}bind def

/st 1 string def

% stack:  string fill-or-not  |-  --
/doOutline{
  /-fillp- exch def
  /-ox- currentpoint/-oy- exch def def
  gsave
  LineThickness setlinewidth
  {st 0 3 -1 roll put
   st dup true charpath
   -fillp- {gsave FillBgColor grestore}if
   stroke stringwidth
   -oy- add/-oy- exch def
   -ox- add/-ox- exch def
   -ox- -oy- moveto
  }forall
  grestore
  -ox- -oy- moveto
}bind def

% stack:  --
/FillBgColor{bgcolor aload pop setrgbcolor fill}bind def

% stack:  -- |- boolean
/isLineStep{
  SyncLineZebra
  {PLScounter 0 gt						% or zebra
   {/PLScounter PLScounter 1 sub def PLScounter 0 eq}
   {false}ifelse
   PrintLineStep 1 gt
   {/PrintLineStep PrintLineStep 1 sub def}
   {/PrintLineStep ZebraHeight def
    /PLScounter PrintLineStart def}ifelse}
  {LineNumber PrintLineStart sub PrintLineStep mod 0 eq}ifelse	% or line step
}def

% stack:  --
/doLineNumber{
  /LineNumber where
  {pop
   isLineStep			% or line step
   LineNumber Lines ge or	% or last line
   {currentfont
    gsave
    0.0 0.0 0.0 setrgbcolor
    /L0 findfont setfont
    LineNumber Lines ge
    {(end      )}
    {LineNumber 6 string cvs(      )strcat}ifelse
    dup stringwidth pop neg 0 rmoveto
    show
    grestore
    setfont}if
    /LineNumber LineNumber 1 add def
  }if
}def

% stack: color-specifier |- --
/SetColor{dup type/realtype eq{setgray}{aload pop setrgbcolor}ifelse}def

% stack: --
/printZebra{
  gsave
  ZebraColor SetColor
  /double-zebra ZebraHeight ZebraHeight add def
  /yiter double-zebra LineHeight mul neg def
  /xiter PrintWidth InterColumn add def
  /zebra-line PageNumber 1 sub NumberOfColumns mul LinesPerColumn mul def
  NumberOfColumns{LinesPerColumn doColumnZebra xiter 0 rmoveto}repeat
  grestore
}def

% stack:  lines-per-column |- --
/doColumnZebra{
  /lpc exch def
  gsave
  ZebraFollow{
    /H ZebraHeight zebra-line ZebraHeight mod sub def
    /lpc lpc H sub def
    zebra-line double-zebra mod ZebraHeight lt
    {H doZebra	% "black" stripe followed by a "white" stripe
     /lpc lpc ZebraHeight sub def
     H ZebraHeight add}
    {H}ifelse	% "white" stripe
    LineHeight mul neg 0 exch rmoveto
    /zebra-line zebra-line LinesPerColumn add def
  }if
  lpc dup double-zebra idiv{ZebraHeight doZebra 0 yiter rmoveto}repeat
  double-zebra mod
  dup 0 le{pop}{dup ZebraHeight gt{pop ZebraHeight}if doZebra}ifelse
  grestore
}def

% stack:  zebra-height (in lines) |- --
/doZebra{
  /zh exch 0.05 sub LineHeight mul def
  gsave
  0 LineHeight 0.65 mul rmoveto
  PrintWidth 0 rlineto
  0 zh neg rlineto
  PrintWidth neg 0 rlineto
  0 zh rlineto
  fill
  grestore
}def

% stack: --
/printBackground{
  /BackgroundColor where{
    pop gsave BackgroundColor SetColor
    NumberOfColumns{
     gsave
     0 LineHeight 0.65 mul rmoveto
     PrintWidth 0 rlineto
     0 PrintHeight neg rlineto
     PrintWidth neg 0 rlineto
     0 PrintHeight rlineto
     fill
     grestore
     PrintWidth InterColumn add 0 rmoveto
    }repeat
    grestore
  }if
}def

% tx ty rotation xscale yscale xpos ypos BeginBackImage
/BeginBackImage{
  /-save-image- save def
  /showpage{}def
  translate
  scale
  rotate
  translate
}def

/EndBackImage{-save-image- restore}def

% string fontsize fontname rotation gray xpos ypos ShowBackText
/ShowBackText{
  gsave
  translate
  setgray
  rotate
  findfont exch dup/-offset- exch -0.25 mul def scalefont setfont
  0 -offset- moveto
  /-saveLineThickness- LineThickness def
  /LineThickness 1 def
  false doOutline
  /LineThickness -saveLineThickness- def
  grestore
}def

/SetPageSize{
  BMark/PageSize[PageWidth LandscapePageHeight LandscapeMode{exch}if]EMark setpagedevice
}def

/BeginDoc{
  % ---- Remember space width of the normal text font `f0'.
  /SpaceWidth/f0 findfont setfont( )stringwidth pop def
  % ---- save the state of the document (useful for ghostscript!)
  /docState save def
  % ---- [andrewi] set PageSize based on chosen dimensions
  UseSetpagedevice{
   WarnPaperSize{SetPageSize}{mark{SetPageSize}stopped cleartomark}ifelse
  }if
  /ColumnWidth PrintWidth InterColumn add def
  % ---- define where  printing will start
  /f0 F					% this installs Ascent
  /PrintStartY PrintHeight Ascent sub def
  /ColumnIndex 1 def
  /N-Up-Counter N-Up-End 1 sub def
  /PLScounter PrintLineStart def
}def

/EndDoc{
  % ---- restore the state of the document (useful for ghostscript!)
  docState restore
}def

/BeginDSCPage{
  % ---- when 1st column, save the state of the page
  ColumnIndex 1 eq{/pageState save def}if
  % ---- save the state of the column
  /columnState save def
}def

/PrintHeaderWidth PrintOnlyOneHeader{PrintPageWidth}{PrintWidth}ifelse def

/BeginPage{
  % ---- when 1st column, print all background effects
  ColumnIndex 1 eq{
    0 PrintStartY moveto		% move to where printing will start
    printBackground
    Zebra{printZebra}if
    printGlobalBackground
    printLocalBackground
  }if
  PrintHeader{
    PrintOnlyOneHeader{ColumnIndex 1 eq}{true}ifelse{
      PrintHeaderFrame{HeaderFrame}if
      HeaderText
    }if
  }if
  0 PrintStartY moveto			% move to where printing will start
  /LineNumber where
  {pop
   SyncLineZebra
   {/H PageNumber 1 sub NumberOfColumns mul ColumnIndex 1 sub add
       LinesPerColumn mul ZebraHeight mod def
    /PLScounter H PrintLineStart ge{0}{PrintLineStart H sub}ifelse def
    /PrintLineStep ZebraHeight H sub def}if}if
  PLN
}def

/EndPage{bg{eolbg}if}def

/EndDSCPage{
  ColumnIndex NumberOfColumns eq{
    % ---- restore the state of the page
    pageState restore
    /ColumnIndex 1 def
    % ---- N-up printing
    N-Up 1 gt{
      N-Up-Counter 0 gt
      {% ---- Next page on same row
	/N-Up-Counter N-Up-Counter 1 sub def
	N-Up-XColumn N-Up-YColumn}
      {% ---- Next page on next line
	/N-Up-Counter N-Up-End 1 sub def
	N-Up-XLine N-Up-YLine}ifelse
      translate
    }if
  }{ % else
    % ---- restore the state of the current column
    columnState restore
    % ---- and translate to the next column
    ColumnWidth 0 translate
    /ColumnIndex ColumnIndex 1 add def
  }ifelse
}def

% stack: number-of-pages-per-sheet |- --
/BeginSheet{
  /sheetState save def
  /pages-per-sheet exch def

  % ---- translate to bottom-right corner of Portrait page
  LandscapeMode{
    LandscapePageHeight 0 translate
    90 rotate
  }if
  % ---- [jack] Kludge: my ghostscript window is 21x27.7 instead of 21x29.7
  /JackGhostscript where{pop 1 27.7 29.7 div scale}if
  UpsideDown{PageWidth LandscapePageHeight translate 180 rotate}if
  % ---- N-Up printing
  N-Up 1 gt{
    % ---- landscape
    N-Up-Landscape{
      PageWidth 0 translate
      90 rotate
    }if
    N-Up-Margin dup translate
    % ---- scale
    LandscapeMode{
      /HH PageWidth def
      /WW LandscapePageHeight def
    }{
      /HH LandscapePageHeight def
      /WW PageWidth def
    }ifelse
    /xx 0 def
    N-Up-Landscape{
      /ww WW WW mul N-Up-Lines HH mul div def
      /cc HH N-Up-Columns N-Up-Missing add div def
      ww cc gt{/xx WW def/WW cc ww div WW mul def/xx xx WW sub def}if
    }{
      /hh HH N-Up-Columns N-Up-Missing add div def
      /cc HH N-Up-Lines div def
      hh cc gt{/xx WW def/WW cc hh div WW mul def/xx xx WW sub def}if
    }ifelse
    WW N-Up-Margin sub N-Up-Margin sub
    N-Up-Landscape
    {N-Up-Lines div HH}
    {N-Up-Columns N-Up-Missing add div WW}ifelse
    div dup scale
    LandscapeMode{/yy 0 def}{/yy xx def/xx 0 def}ifelse
    xx N-Up-Repeat 1 sub LandscapePageHeight mul yy add translate
    % ---- go to start position in page matrix
    N-Up-XStart N-Up-Missing 0.5 mul
    LandscapeMode
    {LandscapePageHeight mul N-Up-YStart add}
    {PageWidth mul add N-Up-YStart}ifelse
    translate
  }if
  % ---- translate to lower left corner of TEXT
  LeftMargin BottomMargin translate

  % ---- N-up printing
  N-Up 1 gt N-Up-Border and pages-per-sheet 0 gt and{
    % ---- page border
    gsave
    0 setgray
    LeftMargin neg BottomMargin neg moveto
    N-Up-Repeat
    {N-Up-End
     {gsave
      PageWidth 0 rlineto
      0 LandscapePageHeight rlineto
      PageWidth neg 0 rlineto
      closepath stroke
      grestore
      /pages-per-sheet pages-per-sheet 1 sub def
      pages-per-sheet 0 le{exit}if
      N-Up-XColumn N-Up-YColumn rmoveto
     }repeat
     pages-per-sheet 0 le{exit}if
     N-Up-XLine N-Up-XColumn sub N-Up-YLine rmoveto
    }repeat
    grestore
  }if
}def

/EndSheet{
  showpage
  sheetState restore
}def

/SetHeaderLines{			% nb-lines --
  /HeaderLines exch def
  % ---- bottom up
  HeaderPad
  HeaderLines 1 sub HeaderLineHeight mul add
  HeaderTitleLineHeight add
  HeaderPad add
  /HeaderHeight exch def
}def

% |---------|
% |  tm     |
% |---------|
% |  header |
% |-+-------| <-- (x y)
% |  ho     |
% |---------|
% |  text   |
% |-+-------| <-- (0 0)
% |  bm     |
% |---------|

% -- |- x y
/HeaderFrameStart{0  PrintHeight HeaderOffset add}def

/HeaderFramePath{
  PrintHeaderWidth	0			rlineto
  0			HeaderHeight		rlineto
  PrintHeaderWidth neg	0			rlineto
  0			HeaderHeight neg	rlineto
}def

/HeaderFrame{
  gsave
    0.4 setlinewidth
    % ---- fill a black rectangle (the shadow of the next one)
    HeaderFrameStart moveto
    1 -1 rmoveto
    HeaderFramePath
    0 setgray fill
    % ---- do the next rectangle ...
    HeaderFrameStart moveto
    HeaderFramePath
    gsave 0.9 setgray fill grestore	% filled with grey
    gsave 0 setgray stroke grestore	% drawn  with black
  grestore
}def

/HeaderStart{
  HeaderFrameStart
  exch HeaderPad add exch	% horizontal pad
  % ---- bottom up
  HeaderPad add			% vertical   pad
  HeaderDescent sub
  HeaderLineHeight HeaderLines 1 sub mul add
}def

/strcat{
  dup length 3 -1 roll dup length dup 4 -1 roll add string dup
  0 5 -1 roll putinterval
  dup 4 2 roll exch putinterval
}def

/pagenumberstring{
  PageNumber 32 string cvs
  ShowNofN{(/)strcat PageCount 32 string cvs strcat}if
}def

/HeaderText{
  HeaderStart moveto

  HeaderLinesRight HeaderLinesLeft	% -- rightLines leftLines

  % ---- hack: `PN 1 and'  ==  `PN 2 modulo'

  % ---- if even page number and duplex, then exchange left and right
  PageNumber 1 and 0 eq SwitchHeader and{exch}if

  { % ---- process the left lines
    aload pop
    exch F
    gsave
      dup xcheck{exec}if
      show
    grestore
    0 HeaderLineHeight neg rmoveto
  }forall

  HeaderStart moveto

  { % ---- process the right lines
    aload pop
    exch F
    gsave
      dup xcheck{exec}if
      dup stringwidth pop
      PrintHeaderWidth exch sub HeaderPad 2 mul sub 0 rmoveto
      show
    grestore
    0 HeaderLineHeight neg rmoveto
  }forall
}def

/ReportFontInfo{
  2 copy
  /t0 3 1 roll DefFont
  /t0 F
  /lh FontHeight def
  /sw( )stringwidth pop def
  /aw(01234567890abcdefghijklmnopqrstuvwxyz)dup length exch
  stringwidth pop exch div def
  /t1 12/Helvetica-Oblique DefFont
  /t1 F
  gsave
    (languagelevel = )show
    languagelevel 32 string cvs show
  grestore
  0 FontHeight neg rmoveto
  gsave
    (For )show
    128 string cvs show
    ( )show
    32 string cvs show
    ( point, the line height is )show
    lh 32 string cvs show
    (, the space width is )show
    sw 32 string cvs show
    (,)show
  grestore
  0 FontHeight neg rmoveto
  gsave
    (and a crude estimate of average character width is )show
    aw 32 string cvs show
    (.)show
  grestore
  0 FontHeight neg rmoveto
}def

% cm to point
/cm{72 mul 2.54 div}def

/ReportAllFontInfo{
  % key = font name   value = font dictionary
  FontDirectory{pop 10 exch ReportFontInfo}forall
}def

% 3 cm 20 cm moveto  10/Courier ReportFontInfo  showpage
% 3 cm 20 cm moveto  ReportAllFontInfo          showpage

% === END ps-print prologue 1