Mercurial > emacs
view src/buffer.c @ 1627:1c2f6bc3d8fe
* config.sub: Added Xenix operating system.
author | Jim Blandy <jimb@redhat.com> |
---|---|
date | Wed, 18 Nov 1992 06:28:11 +0000 |
parents | f84e400808d0 |
children | 86c951f6a444 |
line wrap: on
line source
/* Buffer manipulation primitives for GNU Emacs. Copyright (C) 1985, 1986, 1987, 1988, 1989, 1992 Free Software Foundation, Inc. This file is part of GNU Emacs. GNU Emacs is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 1, or (at your option) any later version. GNU Emacs is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU Emacs; see the file COPYING. If not, write to the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <sys/types.h> #include <sys/stat.h> #include <sys/param.h> #ifndef MAXPATHLEN /* in 4.1, param.h fails to define this. */ #define MAXPATHLEN 1024 #endif /* not MAXPATHLEN */ #include "config.h" #include "lisp.h" #include "intervals.h" #include "window.h" #include "commands.h" #include "buffer.h" #include "syntax.h" #include "indent.h" struct buffer *current_buffer; /* the current buffer */ /* First buffer in chain of all buffers (in reverse order of creation). Threaded through ->next. */ struct buffer *all_buffers; /* This structure holds the default values of the buffer-local variables defined with DEFVAR_PER_BUFFER, that have special slots in each buffer. The default value occupies the same slot in this structure as an individual buffer's value occupies in that buffer. Setting the default value also goes through the alist of buffers and stores into each buffer that does not say it has a local value. */ struct buffer buffer_defaults; /* A Lisp_Object pointer to the above, used for staticpro */ static Lisp_Object Vbuffer_defaults; /* This structure marks which slots in a buffer have corresponding default values in buffer_defaults. Each such slot has a nonzero value in this structure. The value has only one nonzero bit. When a buffer has its own local value for a slot, the bit for that slot (found in the same slot in this structure) is turned on in the buffer's local_var_flags slot. If a slot in this structure is -1, then even though there may be a DEFVAR_PER_BUFFER for the slot, there is no default value for it; and the corresponding slot in buffer_defaults is not used. If a slot is -2, then there is no DEFVAR_PER_BUFFER for it, but there is a default value which is copied into each buffer. If a slot in this structure is negative, then even though there may be a DEFVAR_PER_BUFFER for the slot, there is no default value for it; and the corresponding slot in buffer_defaults is not used. If a slot in this structure corresponding to a DEFVAR_PER_BUFFER is zero, that is a bug */ struct buffer buffer_local_flags; /* This structure holds the names of symbols whose values may be buffer-local. It is indexed and accessed in the same way as the above. */ struct buffer buffer_local_symbols; /* A Lisp_Object pointer to the above, used for staticpro */ static Lisp_Object Vbuffer_local_symbols; /* This structure holds the required types for the values in the buffer-local slots. If a slot contains Qnil, then the corresponding buffer slot may contain a value of any type. If a slot contains an integer, then prospective values' tags must be equal to that integer. When a tag does not match, the function buffer_slot_type_mismatch will signal an error. */ struct buffer buffer_local_types; /* Nonzero means don't allow modification of protected fields. */ int check_protected_fields; Lisp_Object Fset_buffer (); void set_buffer_internal (); /* Alist of all buffer names vs the buffers. */ /* This used to be a variable, but is no longer, to prevent lossage due to user rplac'ing this alist or its elements. */ Lisp_Object Vbuffer_alist; /* Functions to call before and after each text change. */ Lisp_Object Vbefore_change_function; Lisp_Object Vafter_change_function; /* Function to call before changing an unmodified buffer. */ Lisp_Object Vfirst_change_function; Lisp_Object Qfundamental_mode, Qmode_class, Qpermanent_local; Lisp_Object Qprotected_field; Lisp_Object QSFundamental; /* A string "Fundamental" */ Lisp_Object Qkill_buffer_hook; /* For debugging; temporary. See set_buffer_internal. */ /* Lisp_Object Qlisp_mode, Vcheck_symbol; */ nsberror (spec) Lisp_Object spec; { if (XTYPE (spec) == Lisp_String) error ("No buffer named %s", XSTRING (spec)->data); error ("Invalid buffer argument"); } DEFUN ("buffer-list", Fbuffer_list, Sbuffer_list, 0, 0, 0, "Return a list of all existing live buffers.") () { return Fmapcar (Qcdr, Vbuffer_alist); } DEFUN ("get-buffer", Fget_buffer, Sget_buffer, 1, 1, 0, "Return the buffer named NAME (a string).\n\ If there is no live buffer named NAME, return nil.\n\ NAME may also be a buffer; if so, the value is that buffer.") (name) register Lisp_Object name; { if (XTYPE (name) == Lisp_Buffer) return name; CHECK_STRING (name, 0); return Fcdr (Fassoc (name, Vbuffer_alist)); } DEFUN ("get-file-buffer", Fget_file_buffer, Sget_file_buffer, 1, 1, 0, "Return the buffer visiting file FILENAME (a string).\n\ If there is no such live buffer, return nil.") (filename) register Lisp_Object filename; { register Lisp_Object tail, buf, tem; CHECK_STRING (filename, 0); filename = Fexpand_file_name (filename, Qnil); for (tail = Vbuffer_alist; CONSP (tail); tail = XCONS (tail)->cdr) { buf = Fcdr (XCONS (tail)->car); if (XTYPE (buf) != Lisp_Buffer) continue; if (XTYPE (XBUFFER (buf)->filename) != Lisp_String) continue; tem = Fstring_equal (XBUFFER (buf)->filename, filename); if (!NILP (tem)) return buf; } return Qnil; } /* Incremented for each buffer created, to assign the buffer number. */ int buffer_count; DEFUN ("get-buffer-create", Fget_buffer_create, Sget_buffer_create, 1, 1, 0, "Return the buffer named NAME, or create such a buffer and return it.\n\ A new buffer is created if there is no live buffer named NAME.\n\ If NAME starts with a space, the new buffer does not keep undo information.\n\ If NAME is a buffer instead of a string, then it is the value returned.\n\ The value is never nil.") (name) register Lisp_Object name; { register Lisp_Object buf, function, tem; int count = specpdl_ptr - specpdl; register struct buffer *b; buf = Fget_buffer (name); if (!NILP (buf)) return buf; b = (struct buffer *) malloc (sizeof (struct buffer)); if (!b) memory_full (); BUF_GAP_SIZE (b) = 20; BUFFER_ALLOC (BUF_BEG_ADDR (b), BUF_GAP_SIZE (b)); if (! BUF_BEG_ADDR (b)) memory_full (); BUF_PT (b) = 1; BUF_GPT (b) = 1; BUF_BEGV (b) = 1; BUF_ZV (b) = 1; BUF_Z (b) = 1; BUF_MODIFF (b) = 1; /* Put this on the chain of all buffers including killed ones. */ b->next = all_buffers; all_buffers = b; b->mark = Fmake_marker (); /*b->number = make_number (++buffer_count);*/ b->name = name; if (XSTRING (name)->data[0] != ' ') b->undo_list = Qnil; else b->undo_list = Qt; reset_buffer (b); /* Put this in the alist of all live buffers. */ XSET (buf, Lisp_Buffer, b); Vbuffer_alist = nconc2 (Vbuffer_alist, Fcons (Fcons (name, buf), Qnil)); b->mark = Fmake_marker (); b->markers = Qnil; b->name = name; function = buffer_defaults.major_mode; if (NILP (function)) { tem = Fget (current_buffer->major_mode, Qmode_class); if (EQ (tem, Qnil)) function = current_buffer->major_mode; } if (NILP (function) || EQ (function, Qfundamental_mode)) return buf; /* To select a nonfundamental mode, select the buffer temporarily and then call the mode function. */ record_unwind_protect (save_excursion_restore, save_excursion_save ()); Fset_buffer (buf); call0 (function); return unbind_to (count, buf); } /* Reinitialize everything about a buffer except its name and contents. */ void reset_buffer (b) register struct buffer *b; { b->filename = Qnil; b->directory = (current_buffer) ? current_buffer->directory : Qnil; b->modtime = 0; b->save_modified = 1; XFASTINT (b->save_length) = 0; b->last_window_start = 1; b->backed_up = Qnil; b->auto_save_modified = 0; b->auto_save_file_name = Qnil; b->read_only = Qnil; b->fieldlist = Qnil; /* Only defined if Emacs is compiled with USE_TEXT_PROPERTIES */ INITIALIZE_INTERVAL (b, NULL_INTERVAL); reset_buffer_local_variables(b); } reset_buffer_local_variables(b) register struct buffer *b; { register int offset; /* Reset the major mode to Fundamental, together with all the things that depend on the major mode. default-major-mode is handled at a higher level. We ignore it here. */ b->major_mode = Qfundamental_mode; b->keymap = Qnil; b->abbrev_table = Vfundamental_mode_abbrev_table; b->mode_name = QSFundamental; b->minor_modes = Qnil; b->downcase_table = Vascii_downcase_table; b->upcase_table = Vascii_upcase_table; b->case_canon_table = Vascii_downcase_table; b->case_eqv_table = Vascii_upcase_table; #if 0 b->sort_table = XSTRING (Vascii_sort_table); b->folding_sort_table = XSTRING (Vascii_folding_sort_table); #endif /* 0 */ /* Reset all per-buffer variables to their defaults. */ b->local_var_alist = Qnil; b->local_var_flags = 0; /* For each slot that has a default value, copy that into the slot. */ for (offset = (char *)&buffer_local_flags.name - (char *)&buffer_local_flags; offset < sizeof (struct buffer); offset += sizeof (Lisp_Object)) /* sizeof int == sizeof Lisp_Object */ if (*(int *)(offset + (char *) &buffer_local_flags) > 0 || *(int *)(offset + (char *) &buffer_local_flags) == -2) *(Lisp_Object *)(offset + (char *)b) = *(Lisp_Object *)(offset + (char *)&buffer_defaults); } /* We split this away from generate-new-buffer, because rename-buffer and set-visited-file-name ought to be able to use this to really rename the buffer properly. */ DEFUN ("generate-new-buffer-name", Fgenerate_new_buffer_name, Sgenerate_new_buffer_name, 1, 1, 0, "Return a string that is the name of no existing buffer based on NAME.\n\ If there is no live buffer named NAME, then return NAME.\n\ Otherwise modify name by appending `<NUMBER>', incrementing NUMBER\n\ until an unused name is found, and then return that name.") (name) register Lisp_Object name; { register Lisp_Object gentemp, tem; int count; char number[10]; CHECK_STRING (name, 0); tem = Fget_buffer (name); if (NILP (tem)) return name; count = 1; while (1) { sprintf (number, "<%d>", ++count); gentemp = concat2 (name, build_string (number)); tem = Fget_buffer (gentemp); if (NILP (tem)) return gentemp; } } DEFUN ("buffer-name", Fbuffer_name, Sbuffer_name, 0, 1, 0, "Return the name of BUFFER, as a string.\n\ With no argument or nil as argument, return the name of the current buffer.") (buffer) register Lisp_Object buffer; { if (NILP (buffer)) return current_buffer->name; CHECK_BUFFER (buffer, 0); return XBUFFER (buffer)->name; } DEFUN ("buffer-file-name", Fbuffer_file_name, Sbuffer_file_name, 0, 1, 0, "Return name of file BUFFER is visiting, or nil if none.\n\ No argument or nil as argument means use the current buffer.") (buffer) register Lisp_Object buffer; { if (NILP (buffer)) return current_buffer->filename; CHECK_BUFFER (buffer, 0); return XBUFFER (buffer)->filename; } DEFUN ("buffer-local-variables", Fbuffer_local_variables, Sbuffer_local_variables, 0, 1, 0, "Return an alist of variables that are buffer-local in BUFFER.\n\ Each element looks like (SYMBOL . VALUE) and describes one variable.\n\ Note that storing new VALUEs in these elements doesn't change the variables.\n\ No argument or nil as argument means use current buffer as BUFFER.") (buffer) register Lisp_Object buffer; { register struct buffer *buf; register Lisp_Object val; if (NILP (buffer)) buf = current_buffer; else { CHECK_BUFFER (buffer, 0); buf = XBUFFER (buffer); } { /* Reference each variable in the alist in our current buffer. If inquiring about the current buffer, this gets the current values, so store them into the alist so the alist is up to date. If inquiring about some other buffer, this swaps out any values for that buffer, making the alist up to date automatically. */ register Lisp_Object tem; for (tem = buf->local_var_alist; CONSP (tem); tem = XCONS (tem)->cdr) { Lisp_Object v1 = Fsymbol_value (XCONS (XCONS (tem)->car)->car); if (buf == current_buffer) XCONS (XCONS (tem)->car)->cdr = v1; } } /* Make a copy of the alist, to return it. */ val = Fcopy_alist (buf->local_var_alist); /* Add on all the variables stored in special slots. */ { register int offset, mask; for (offset = (char *)&buffer_local_symbols.name - (char *)&buffer_local_symbols; offset < sizeof (struct buffer); offset += (sizeof (int))) /* sizeof int == sizeof Lisp_Object */ { mask = *(int *)(offset + (char *) &buffer_local_flags); if (mask == -1 || (buf->local_var_flags & mask)) if (XTYPE (*(Lisp_Object *)(offset + (char *)&buffer_local_symbols)) == Lisp_Symbol) val = Fcons (Fcons (*(Lisp_Object *)(offset + (char *)&buffer_local_symbols), *(Lisp_Object *)(offset + (char *)buf)), val); } } return (val); } DEFUN ("buffer-modified-p", Fbuffer_modified_p, Sbuffer_modified_p, 0, 1, 0, "Return t if BUFFER was modified since its file was last read or saved.\n\ No argument or nil as argument means use current buffer as BUFFER.") (buffer) register Lisp_Object buffer; { register struct buffer *buf; if (NILP (buffer)) buf = current_buffer; else { CHECK_BUFFER (buffer, 0); buf = XBUFFER (buffer); } return buf->save_modified < BUF_MODIFF (buf) ? Qt : Qnil; } DEFUN ("set-buffer-modified-p", Fset_buffer_modified_p, Sset_buffer_modified_p, 1, 1, 0, "Mark current buffer as modified or unmodified according to FLAG.\n\ A non-nil FLAG means mark the buffer modified.") (flag) register Lisp_Object flag; { register int already; register Lisp_Object fn; #ifdef CLASH_DETECTION /* If buffer becoming modified, lock the file. If buffer becoming unmodified, unlock the file. */ fn = current_buffer->filename; if (!NILP (fn)) { already = current_buffer->save_modified < MODIFF; if (!already && !NILP (flag)) lock_file (fn); else if (already && NILP (flag)) unlock_file (fn); } #endif /* CLASH_DETECTION */ current_buffer->save_modified = NILP (flag) ? MODIFF : 0; update_mode_lines++; return flag; } DEFUN ("buffer-modified-tick", Fbuffer_modified_tick, Sbuffer_modified_tick, 0, 1, 0, "Return BUFFER's tick counter, incremented for each change in text.\n\ Each buffer has a tick counter which is incremented each time the text in\n\ that buffer is changed. It wraps around occasionally.\n\ No argument or nil as argument means use current buffer as BUFFER.") (buffer) register Lisp_Object buffer; { register struct buffer *buf; if (NILP (buffer)) buf = current_buffer; else { CHECK_BUFFER (buffer, 0); buf = XBUFFER (buffer); } return make_number (BUF_MODIFF (buf)); } DEFUN ("rename-buffer", Frename_buffer, Srename_buffer, 1, 2, "sRename buffer (to new name): ", "Change current buffer's name to NEWNAME (a string).\n\ If second arg DISTINGUISH is nil or omitted, it is an error if a\n\ buffer named NEWNAME already exists.\n\ If DISTINGUISH is non-nil, come up with a new name using\n\ `generate-new-buffer-name'.\n\ Return the name we actually gave the buffer.\n\ This does not change the name of the visited file (if any).") (name, distinguish) register Lisp_Object name, distinguish; { register Lisp_Object tem, buf; CHECK_STRING (name, 0); tem = Fget_buffer (name); if (XBUFFER (tem) == current_buffer) return current_buffer->name; if (!NILP (tem)) { if (!NILP (distinguish)) name = Fgenerate_new_buffer_name (name); else error ("Buffer name \"%s\" is in use", XSTRING (name)->data); } current_buffer->name = name; XSET (buf, Lisp_Buffer, current_buffer); Fsetcar (Frassq (buf, Vbuffer_alist), name); if (NILP (current_buffer->filename) && !NILP (current_buffer->auto_save_file_name)) call0 (intern ("rename-auto-save-file")); return name; } DEFUN ("other-buffer", Fother_buffer, Sother_buffer, 0, 2, 0, "Return most recently selected buffer other than BUFFER.\n\ Buffers not visible in windows are preferred to visible buffers,\n\ unless optional second argument VISIBLE-OK is non-nil.\n\ If no other buffer exists, the buffer `*scratch*' is returned.\n\ If BUFFER is omitted or nil, some interesting buffer is returned.") (buffer, visible_ok) register Lisp_Object buffer, visible_ok; { register Lisp_Object tail, buf, notsogood, tem; notsogood = Qnil; for (tail = Vbuffer_alist; !NILP (tail); tail = Fcdr (tail)) { buf = Fcdr (Fcar (tail)); if (EQ (buf, buffer)) continue; if (XSTRING (XBUFFER (buf)->name)->data[0] == ' ') continue; if (NILP (visible_ok)) tem = Fget_buffer_window (buf, Qnil); else tem = Qnil; if (NILP (tem)) return buf; if (NILP (notsogood)) notsogood = buf; } if (!NILP (notsogood)) return notsogood; return Fget_buffer_create (build_string ("*scratch*")); } DEFUN ("buffer-disable-undo", Fbuffer_disable_undo, Sbuffer_disable_undo, 1,1, 0, "Make BUFFER stop keeping undo information.") (buffer) register Lisp_Object buffer; { Lisp_Object real_buffer; if (NILP (buffer)) XSET (real_buffer, Lisp_Buffer, current_buffer); else { real_buffer = Fget_buffer (buffer); if (NILP (real_buffer)) nsberror (buffer); } XBUFFER (real_buffer)->undo_list = Qt; return Qnil; } DEFUN ("buffer-enable-undo", Fbuffer_enable_undo, Sbuffer_enable_undo, 0, 1, "", "Start keeping undo information for buffer BUFFER.\n\ No argument or nil as argument means do this for the current buffer.") (buffer) register Lisp_Object buffer; { Lisp_Object real_buffer; if (NILP (buffer)) XSET (real_buffer, Lisp_Buffer, current_buffer); else { real_buffer = Fget_buffer (buffer); if (NILP (real_buffer)) nsberror (buffer); } if (EQ (XBUFFER (real_buffer)->undo_list, Qt)) XBUFFER (real_buffer)->undo_list = Qnil; return Qnil; } /* DEFVAR_LISP ("kill-buffer-hook", no_cell, "\ Hook to be run (by `run-hooks', which see) when a buffer is killed.\n\ The buffer being killed will be current while the hook is running.\n\ See `kill-buffer'." */ DEFUN ("kill-buffer", Fkill_buffer, Skill_buffer, 1, 1, "bKill buffer: ", "Kill the buffer BUFFER.\n\ The argument may be a buffer or may be the name of a buffer.\n\ An argument of nil means kill the current buffer.\n\n\ Value is t if the buffer is actually killed, nil if user says no.\n\n\ The value of `kill-buffer-hook' (which may be local to that buffer),\n\ if not void, is a list of functions to be called, with no arguments,\n\ before the buffer is actually killed. The buffer to be killed is current\n\ when the hook functions are called.\n\n\ Any processes that have this buffer as the `process-buffer' are killed\n\ with `delete-process'.") (bufname) Lisp_Object bufname; { Lisp_Object buf; register struct buffer *b; register Lisp_Object tem; register struct Lisp_Marker *m; struct gcpro gcpro1, gcpro2; if (NILP (bufname)) buf = Fcurrent_buffer (); else buf = Fget_buffer (bufname); if (NILP (buf)) nsberror (bufname); b = XBUFFER (buf); /* Query if the buffer is still modified. */ if (INTERACTIVE && !NILP (b->filename) && BUF_MODIFF (b) > b->save_modified) { GCPRO2 (buf, bufname); tem = do_yes_or_no_p (format1 ("Buffer %s modified; kill anyway? ", XSTRING (b->name)->data)); UNGCPRO; if (NILP (tem)) return Qnil; } /* Run kill-buffer hook with the buffer to be killed the current buffer. */ { register Lisp_Object val; int count = specpdl_ptr - specpdl; record_unwind_protect (save_excursion_restore, save_excursion_save ()); set_buffer_internal (b); call1 (Vrun_hooks, Qkill_buffer_hook); unbind_to (count, Qnil); } /* We have no more questions to ask. Verify that it is valid to kill the buffer. This must be done after the questions since anything can happen within do_yes_or_no_p. */ /* Don't kill the minibuffer now current. */ if (EQ (buf, XWINDOW (minibuf_window)->buffer)) return Qnil; if (NILP (b->name)) return Qnil; /* Make this buffer not be current. In the process, notice if this is the sole visible buffer and give up if so. */ if (b == current_buffer) { tem = Fother_buffer (buf, Qnil); Fset_buffer (tem); if (b == current_buffer) return Qnil; } /* Now there is no question: we can kill the buffer. */ #ifdef CLASH_DETECTION /* Unlock this buffer's file, if it is locked. */ unlock_buffer (b); #endif /* CLASH_DETECTION */ kill_buffer_processes (buf); tem = Vinhibit_quit; Vinhibit_quit = Qt; Vbuffer_alist = Fdelq (Frassq (buf, Vbuffer_alist), Vbuffer_alist); Freplace_buffer_in_windows (buf); Vinhibit_quit = tem; /* Delete any auto-save file. */ if (XTYPE (b->auto_save_file_name) == Lisp_String) { Lisp_Object tem; tem = Fsymbol_value (intern ("delete-auto-save-files")); if (! NILP (tem)) unlink (XSTRING (b->auto_save_file_name)->data); } /* Unchain all markers of this buffer and leave them pointing nowhere. */ for (tem = b->markers; !EQ (tem, Qnil); ) { m = XMARKER (tem); m->buffer = 0; tem = m->chain; m->chain = Qnil; } b->markers = Qnil; /* Only defined if Emacs is compiled with USE_TEXT_PROPERTIES */ INITIALIZE_INTERVAL (b, NULL_INTERVAL); /* Perhaps we should explicitly free the interval tree here... */ b->name = Qnil; BUFFER_FREE (BUF_BEG_ADDR (b)); b->undo_list = Qnil; return Qt; } /* Move the assoc for buffer BUF to the front of buffer-alist. Since we do this each time BUF is selected visibly, the more recently selected buffers are always closer to the front of the list. This means that other_buffer is more likely to choose a relevant buffer. */ record_buffer (buf) Lisp_Object buf; { register Lisp_Object link, prev; prev = Qnil; for (link = Vbuffer_alist; CONSP (link); link = XCONS (link)->cdr) { if (EQ (XCONS (XCONS (link)->car)->cdr, buf)) break; prev = link; } /* Effectively do Vbuffer_alist = Fdelq (link, Vbuffer_alist); we cannot use Fdelq itself here because it allows quitting. */ if (NILP (prev)) Vbuffer_alist = XCONS (Vbuffer_alist)->cdr; else XCONS (prev)->cdr = XCONS (XCONS (prev)->cdr)->cdr; XCONS(link)->cdr = Vbuffer_alist; Vbuffer_alist = link; } DEFUN ("switch-to-buffer", Fswitch_to_buffer, Sswitch_to_buffer, 1, 2, "BSwitch to buffer: ", "Select buffer BUFFER in the current window.\n\ BUFFER may be a buffer or a buffer name.\n\ Optional second arg NORECORD non-nil means\n\ do not put this buffer at the front of the list of recently selected ones.\n\ \n\ WARNING: This is NOT the way to work on another buffer temporarily\n\ within a Lisp program! Use `set-buffer' instead. That avoids messing with\n\ the window-buffer correspondences.") (bufname, norecord) Lisp_Object bufname, norecord; { register Lisp_Object buf; Lisp_Object tem; if (EQ (minibuf_window, selected_window)) error ("Cannot switch buffers in minibuffer window"); tem = Fwindow_dedicated_p (selected_window); if (!NILP (tem)) error ("Cannot switch buffers in a dedicated window"); if (NILP (bufname)) buf = Fother_buffer (Fcurrent_buffer (), Qnil); else buf = Fget_buffer_create (bufname); Fset_buffer (buf); if (NILP (norecord)) record_buffer (buf); Fset_window_buffer (EQ (selected_window, minibuf_window) ? Fnext_window (minibuf_window, Qnil) : selected_window, buf); return Qnil; } DEFUN ("pop-to-buffer", Fpop_to_buffer, Spop_to_buffer, 1, 2, 0, "Select buffer BUFFER in some window, preferably a different one.\n\ If BUFFER is nil, then some other buffer is chosen.\n\ If `pop-up-windows' is non-nil, windows can be split to do this.\n\ If optional second arg OTHER-WINDOW is non-nil, insist on finding another\n\ window even if BUFFER is already visible in the selected window.") (bufname, other) Lisp_Object bufname, other; { register Lisp_Object buf; if (NILP (bufname)) buf = Fother_buffer (Fcurrent_buffer (), Qnil); else buf = Fget_buffer_create (bufname); Fset_buffer (buf); record_buffer (buf); Fselect_window (Fdisplay_buffer (buf, other)); return Qnil; } DEFUN ("current-buffer", Fcurrent_buffer, Scurrent_buffer, 0, 0, 0, "Return the current buffer as a Lisp object.") () { register Lisp_Object buf; XSET (buf, Lisp_Buffer, current_buffer); return buf; } /* Set the current buffer to b */ void set_buffer_internal (b) register struct buffer *b; { register struct buffer *old_buf; register Lisp_Object tail, valcontents; enum Lisp_Type tem; if (current_buffer == b) return; windows_or_buffers_changed = 1; old_buf = current_buffer; current_buffer = b; last_known_column_point = -1; /* invalidate indentation cache */ /* Look down buffer's list of local Lisp variables to find and update any that forward into C variables. */ for (tail = b->local_var_alist; !NILP (tail); tail = XCONS (tail)->cdr) { valcontents = XSYMBOL (XCONS (XCONS (tail)->car)->car)->value; if ((XTYPE (valcontents) == Lisp_Buffer_Local_Value || XTYPE (valcontents) == Lisp_Some_Buffer_Local_Value) && (tem = XTYPE (XCONS (valcontents)->car), (tem == Lisp_Boolfwd || tem == Lisp_Intfwd || tem == Lisp_Objfwd))) /* Just reference the variable to cause it to become set for this buffer. */ Fsymbol_value (XCONS (XCONS (tail)->car)->car); } /* Do the same with any others that were local to the previous buffer */ if (old_buf) for (tail = old_buf->local_var_alist; !NILP (tail); tail = XCONS (tail)->cdr) { valcontents = XSYMBOL (XCONS (XCONS (tail)->car)->car)->value; if ((XTYPE (valcontents) == Lisp_Buffer_Local_Value || XTYPE (valcontents) == Lisp_Some_Buffer_Local_Value) && (tem = XTYPE (XCONS (valcontents)->car), (tem == Lisp_Boolfwd || tem == Lisp_Intfwd || tem == Lisp_Objfwd))) /* Just reference the variable to cause it to become set for this buffer. */ Fsymbol_value (XCONS (XCONS (tail)->car)->car); } } DEFUN ("set-buffer", Fset_buffer, Sset_buffer, 1, 1, 0, "Make the buffer BUFFER current for editing operations.\n\ BUFFER may be a buffer or the name of an existing buffer.\n\ See also `save-excursion' when you want to make a buffer current temporarily.\n\ This function does not display the buffer, so its effect ends\n\ when the current command terminates.\n\ Use `switch-to-buffer' or `pop-to-buffer' to switch buffers permanently.") (bufname) register Lisp_Object bufname; { register Lisp_Object buffer; buffer = Fget_buffer (bufname); if (NILP (buffer)) nsberror (bufname); if (NILP (XBUFFER (buffer)->name)) error ("Selecting deleted buffer"); set_buffer_internal (XBUFFER (buffer)); return buffer; } DEFUN ("barf-if-buffer-read-only", Fbarf_if_buffer_read_only, Sbarf_if_buffer_read_only, 0, 0, 0, "Signal a `buffer-read-only' error if the current buffer is read-only.") () { while (!NILP (current_buffer->read_only)) Fsignal (Qbuffer_read_only, (Fcons (Fcurrent_buffer (), Qnil))); return Qnil; } DEFUN ("bury-buffer", Fbury_buffer, Sbury_buffer, 0, 1, "", "Put BUFFER at the end of the list of all buffers.\n\ There it is the least likely candidate for `other-buffer' to return;\n\ thus, the least likely buffer for \\[switch-to-buffer] to select by default.\n\ If BUFFER is nil or omitted, bury the current buffer.\n\ Also, if BUFFER is nil or omitted, remove the current buffer from the\n\ selected window if it is displayed there.") (buf) register Lisp_Object buf; { /* Figure out what buffer we're going to bury. */ if (NILP (buf)) { XSET (buf, Lisp_Buffer, current_buffer); /* If we're burying the current buffer, unshow it. */ Fswitch_to_buffer (Fother_buffer (buf), Qnil); } else { Lisp_Object buf1; buf1 = Fget_buffer (buf); if (NILP (buf1)) nsberror (buf); buf = buf1; } /* Move buf to the end of the buffer list. */ { register Lisp_Object aelt, link; aelt = Frassq (buf, Vbuffer_alist); link = Fmemq (aelt, Vbuffer_alist); Vbuffer_alist = Fdelq (aelt, Vbuffer_alist); XCONS (link)->cdr = Qnil; Vbuffer_alist = nconc2 (Vbuffer_alist, link); } return Qnil; } DEFUN ("erase-buffer", Ferase_buffer, Serase_buffer, 0, 0, 0, "Delete the entire contents of the current buffer.\n\ Any clipping restriction in effect (see `narrow-to-region') is removed,\n\ so the buffer is truly empty after this.") () { Fwiden (); del_range (BEG, Z); current_buffer->last_window_start = 1; /* Prevent warnings, or suspension of auto saving, that would happen if future size is less than past size. Use of erase-buffer implies that the future text is not really related to the past text. */ XFASTINT (current_buffer->save_length) = 0; return Qnil; } validate_region (b, e) register Lisp_Object *b, *e; { register int i; CHECK_NUMBER_COERCE_MARKER (*b, 0); CHECK_NUMBER_COERCE_MARKER (*e, 1); if (XINT (*b) > XINT (*e)) { i = XFASTINT (*b); /* This is legit even if *b is < 0 */ *b = *e; XFASTINT (*e) = i; /* because this is all we do with i. */ } if (!(BEGV <= XINT (*b) && XINT (*b) <= XINT (*e) && XINT (*e) <= ZV)) args_out_of_range (*b, *e); } Lisp_Object list_buffers_1 (files) Lisp_Object files; { register Lisp_Object tail, tem, buf; Lisp_Object col1, col2, col3, minspace; register struct buffer *old = current_buffer, *b; int desired_point = 0; Lisp_Object other_file_symbol; other_file_symbol = intern ("list-buffers-directory"); XFASTINT (col1) = 19; XFASTINT (col2) = 25; XFASTINT (col3) = 40; XFASTINT (minspace) = 1; Fset_buffer (Vstandard_output); tail = intern ("Buffer-menu-mode"); if (!EQ (tail, current_buffer->major_mode) && (tem = Ffboundp (tail), !NILP (tem))) call0 (tail); Fbuffer_disable_undo (Vstandard_output); current_buffer->read_only = Qnil; write_string ("\ MR Buffer Size Mode File\n\ -- ------ ---- ---- ----\n", -1); for (tail = Vbuffer_alist; !NILP (tail); tail = Fcdr (tail)) { buf = Fcdr (Fcar (tail)); b = XBUFFER (buf); /* Don't mention the minibuffers. */ if (XSTRING (b->name)->data[0] == ' ') continue; /* Optionally don't mention buffers that lack files. */ if (!NILP (files) && NILP (b->filename)) continue; /* Identify the current buffer. */ if (b == old) desired_point = point; write_string (b == old ? "." : " ", -1); /* Identify modified buffers */ write_string (BUF_MODIFF (b) > b->save_modified ? "*" : " ", -1); write_string (NILP (b->read_only) ? " " : "% ", -1); Fprinc (b->name, Qnil); Findent_to (col1, make_number (2)); XFASTINT (tem) = BUF_Z (b) - BUF_BEG (b); Fprin1 (tem, Qnil); Findent_to (col2, minspace); Fprinc (b->mode_name, Qnil); Findent_to (col3, minspace); if (!NILP (b->filename)) Fprinc (b->filename, Qnil); else { /* No visited file; check local value of list-buffers-directory. */ Lisp_Object tem; set_buffer_internal (b); tem = Fboundp (other_file_symbol); if (!NILP (tem)) { tem = Fsymbol_value (other_file_symbol); Fset_buffer (Vstandard_output); if (XTYPE (tem) == Lisp_String) Fprinc (tem, Qnil); } else Fset_buffer (Vstandard_output); } write_string ("\n", -1); } current_buffer->read_only = Qt; set_buffer_internal (old); /* Foo. This doesn't work since temp_output_buffer_show sets point to 1 if (desired_point) XBUFFER (Vstandard_output)->text.pointloc = desired_point; */ return Qnil; } DEFUN ("list-buffers", Flist_buffers, Slist_buffers, 0, 1, "P", "Display a list of names of existing buffers.\n\ The list is displayed in a buffer named `*Buffer List*'.\n\ Note that buffers with names starting with spaces are omitted.\n\ Non-null optional arg FILES-ONLY means mention only file buffers.\n\ \n\ The M column contains a * for buffers that are modified.\n\ The R column contains a % for buffers that are read-only.") (files) Lisp_Object files; { internal_with_output_to_temp_buffer ("*Buffer List*", list_buffers_1, files); return Qnil; } DEFUN ("kill-all-local-variables", Fkill_all_local_variables, Skill_all_local_variables, 0, 0, 0, "Switch to Fundamental mode by killing current buffer's local variables.\n\ Most local variable bindings are eliminated so that the default values\n\ become effective once more. Also, the syntax table is set from\n\ `standard-syntax-table', the local keymap is set to nil,\n\ and the abbrev table from `fundamental-mode-abbrev-table'.\n\ This function also forces redisplay of the mode line.\n\ \n\ Every function to select a new major mode starts by\n\ calling this function.\n\n\ As a special exception, local variables whose names have\n\ a non-nil `permanent-local' property are not eliminated by this function.") () { register Lisp_Object alist, sym, tem; Lisp_Object oalist; oalist = current_buffer->local_var_alist; /* Make sure no local variables remain set up with this buffer for their current values. */ for (alist = oalist; !NILP (alist); alist = XCONS (alist)->cdr) { sym = XCONS (XCONS (alist)->car)->car; /* Need not do anything if some other buffer's binding is now encached. */ tem = XCONS (XCONS (XSYMBOL (sym)->value)->cdr)->car; if (XBUFFER (tem) == current_buffer) { /* Symbol is set up for this buffer's old local value. Set it up for the current buffer with the default value. */ tem = XCONS (XCONS (XSYMBOL (sym)->value)->cdr)->cdr; XCONS (tem)->car = tem; XCONS (XCONS (XSYMBOL (sym)->value)->cdr)->car = Fcurrent_buffer (); store_symval_forwarding (sym, XCONS (XSYMBOL (sym)->value)->car, XCONS (tem)->cdr); } } /* Actually eliminate all local bindings of this buffer. */ reset_buffer_local_variables (current_buffer); /* Redisplay mode lines; we are changing major mode. */ update_mode_lines++; /* Any which are supposed to be permanent, make local again, with the same values they had. */ for (alist = oalist; !NILP (alist); alist = XCONS (alist)->cdr) { sym = XCONS (XCONS (alist)->car)->car; tem = Fget (sym, Qpermanent_local); if (! NILP (tem)) { Fmake_local_variable (sym); Fset (sym, XCONS (XCONS (alist)->car)->cdr); } } /* Force mode-line redisplay. Useful here because all major mode commands call this function. */ update_mode_lines++; return Qnil; } DEFUN ("region-fields", Fregion_fields, Sregion_fields, 2, 4, "", "Return list of fields overlapping a given portion of a buffer.\n\ The portion is specified by arguments START, END and BUFFER.\n\ BUFFER defaults to the current buffer.\n\ Optional 4th arg ERROR-CHECK non nil means just report an error\n\ if any protected fields overlap this portion.") (start, end, buffer, error_check) Lisp_Object start, end, buffer, error_check; { register int start_loc, end_loc; Lisp_Object fieldlist; Lisp_Object collector; if (NILP (buffer)) fieldlist = current_buffer->fieldlist; else { CHECK_BUFFER (buffer, 1); fieldlist = XBUFFER (buffer)->fieldlist; } CHECK_NUMBER_COERCE_MARKER (start, 2); start_loc = XINT (start); CHECK_NUMBER_COERCE_MARKER (end, 2); end_loc = XINT (end); collector = Qnil; while (XTYPE (fieldlist) == Lisp_Cons) { register Lisp_Object field; register int field_start, field_end; field = XCONS (fieldlist)->car; field_start = marker_position (FIELD_START_MARKER (field)) - 1; field_end = marker_position (FIELD_END_MARKER (field)); if ((start_loc < field_start && end_loc > field_start) || (start_loc >= field_start && start_loc < field_end)) { if (!NILP (error_check)) { if (!NILP (FIELD_PROTECTED_FLAG (field))) { struct gcpro gcpro1; GCPRO1 (fieldlist); Fsignal (Qprotected_field, Fcons (field, Qnil)); UNGCPRO; } } else collector = Fcons (field, collector); } fieldlist = XCONS (fieldlist)->cdr; } return collector; } /* Somebody has tried to store NEWVAL into the buffer-local slot with offset XUINT (valcontents), and NEWVAL has an unacceptable type. */ void buffer_slot_type_mismatch (valcontents, newval) Lisp_Object valcontents, newval; { unsigned int offset = XUINT (valcontents); char *symbol_name = (XSYMBOL (*(Lisp_Object *)(offset + (char *)&buffer_local_symbols)) ->name->data); char *type_name; switch (XINT (*(Lisp_Object *)(offset + (char *)&buffer_local_types))) { case Lisp_Int: type_name = "integers"; break; case Lisp_String: type_name = "strings"; break; case Lisp_Marker: type_name = "markers"; break; case Lisp_Symbol: type_name = "symbols"; break; case Lisp_Cons: type_name = "lists"; break; case Lisp_Vector: type_name = "vector"; break; default: abort (); } error ("only %s should be stored in the buffer-local variable %s", type_name, symbol_name); } init_buffer_once () { register Lisp_Object tem; /* Make sure all markable slots in buffer_defaults are initialized reasonably, so mark_buffer won't choke. */ reset_buffer (&buffer_defaults); reset_buffer (&buffer_local_symbols); XSET (Vbuffer_defaults, Lisp_Buffer, &buffer_defaults); XSET (Vbuffer_local_symbols, Lisp_Buffer, &buffer_local_symbols); /* Set up the default values of various buffer slots. */ /* Must do these before making the first buffer! */ /* real setup is done in loaddefs.el */ buffer_defaults.mode_line_format = build_string ("%-"); buffer_defaults.abbrev_mode = Qnil; buffer_defaults.overwrite_mode = Qnil; buffer_defaults.case_fold_search = Qt; buffer_defaults.auto_fill_function = Qnil; buffer_defaults.selective_display = Qnil; #ifndef old buffer_defaults.selective_display_ellipses = Qt; #endif buffer_defaults.abbrev_table = Qnil; buffer_defaults.display_table = Qnil; buffer_defaults.fieldlist = Qnil; buffer_defaults.undo_list = Qnil; XFASTINT (buffer_defaults.tab_width) = 8; buffer_defaults.truncate_lines = Qnil; buffer_defaults.ctl_arrow = Qt; XFASTINT (buffer_defaults.fill_column) = 70; XFASTINT (buffer_defaults.left_margin) = 0; /* Assign the local-flags to the slots that have default values. The local flag is a bit that is used in the buffer to say that it has its own local value for the slot. The local flag bits are in the local_var_flags slot of the buffer. */ /* Nothing can work if this isn't true */ if (sizeof (int) != sizeof (Lisp_Object)) abort (); /* 0 means not a lisp var, -1 means always local, else mask */ bzero (&buffer_local_flags, sizeof buffer_local_flags); XFASTINT (buffer_local_flags.filename) = -1; XFASTINT (buffer_local_flags.directory) = -1; XFASTINT (buffer_local_flags.backed_up) = -1; XFASTINT (buffer_local_flags.save_length) = -1; XFASTINT (buffer_local_flags.auto_save_file_name) = -1; XFASTINT (buffer_local_flags.read_only) = -1; XFASTINT (buffer_local_flags.major_mode) = -1; XFASTINT (buffer_local_flags.mode_name) = -1; XFASTINT (buffer_local_flags.undo_list) = -1; XFASTINT (buffer_local_flags.mode_line_format) = 1; XFASTINT (buffer_local_flags.abbrev_mode) = 2; XFASTINT (buffer_local_flags.overwrite_mode) = 4; XFASTINT (buffer_local_flags.case_fold_search) = 8; XFASTINT (buffer_local_flags.auto_fill_function) = 0x10; XFASTINT (buffer_local_flags.selective_display) = 0x20; #ifndef old XFASTINT (buffer_local_flags.selective_display_ellipses) = 0x40; #endif XFASTINT (buffer_local_flags.tab_width) = 0x80; XFASTINT (buffer_local_flags.truncate_lines) = 0x100; XFASTINT (buffer_local_flags.ctl_arrow) = 0x200; XFASTINT (buffer_local_flags.fill_column) = 0x400; XFASTINT (buffer_local_flags.left_margin) = 0x800; XFASTINT (buffer_local_flags.abbrev_table) = 0x1000; XFASTINT (buffer_local_flags.display_table) = 0x2000; XFASTINT (buffer_local_flags.fieldlist) = 0x4000; XFASTINT (buffer_local_flags.syntax_table) = 0x8000; Vbuffer_alist = Qnil; current_buffer = 0; all_buffers = 0; QSFundamental = build_string ("Fundamental"); Qfundamental_mode = intern ("fundamental-mode"); buffer_defaults.major_mode = Qfundamental_mode; Qmode_class = intern ("mode-class"); Qprotected_field = intern ("protected-field"); Qpermanent_local = intern ("permanent-local"); Qkill_buffer_hook = intern ("kill-buffer-hook"); Vprin1_to_string_buffer = Fget_buffer_create (build_string (" prin1")); /* super-magic invisible buffer */ Vbuffer_alist = Qnil; Fset_buffer (Fget_buffer_create (build_string ("*scratch*"))); } init_buffer () { char buf[MAXPATHLEN+1]; char *pwd; struct stat dotstat, pwdstat; Fset_buffer (Fget_buffer_create (build_string ("*scratch*"))); /* If PWD is accurate, use it instead of calling getwd. This is faster when PWD is right, and may avoid a fatal error. */ if ((pwd = getenv ("PWD")) != 0 && *pwd == '/' && stat (pwd, &pwdstat) == 0 && stat (".", &dotstat) == 0 && dotstat.st_ino == pwdstat.st_ino && dotstat.st_dev == pwdstat.st_dev && strlen (pwd) < MAXPATHLEN) strcpy (buf, pwd); else if (getwd (buf) == 0) fatal ("`getwd' failed: %s.\n", buf); #ifndef VMS /* Maybe this should really use some standard subroutine whose definition is filename syntax dependent. */ if (buf[strlen (buf) - 1] != '/') strcat (buf, "/"); #endif /* not VMS */ current_buffer->directory = build_string (buf); } /* initialize the buffer routines */ syms_of_buffer () { staticpro (&Vbuffer_defaults); staticpro (&Vbuffer_local_symbols); staticpro (&Qfundamental_mode); staticpro (&Qmode_class); staticpro (&QSFundamental); staticpro (&Vbuffer_alist); staticpro (&Qprotected_field); staticpro (&Qpermanent_local); staticpro (&Qkill_buffer_hook); Fput (Qprotected_field, Qerror_conditions, Fcons (Qprotected_field, Fcons (Qerror, Qnil))); Fput (Qprotected_field, Qerror_message, build_string ("Attempt to modify a protected field")); /* All these use DEFVAR_LISP_NOPRO because the slots in buffer_defaults will all be marked via Vbuffer_defaults. */ DEFVAR_LISP_NOPRO ("default-mode-line-format", &buffer_defaults.mode_line_format, "Default value of `mode-line-format' for buffers that don't override it.\n\ This is the same as (default-value 'mode-line-format)."); DEFVAR_LISP_NOPRO ("default-abbrev-mode", &buffer_defaults.abbrev_mode, "Default value of `abbrev-mode' for buffers that do not override it.\n\ This is the same as (default-value 'abbrev-mode)."); DEFVAR_LISP_NOPRO ("default-ctl-arrow", &buffer_defaults.ctl_arrow, "Default value of `ctl-arrow' for buffers that do not override it.\n\ This is the same as (default-value 'ctl-arrow)."); DEFVAR_LISP_NOPRO ("default-truncate-lines", &buffer_defaults.truncate_lines, "Default value of `truncate-lines' for buffers that do not override it.\n\ This is the same as (default-value 'truncate-lines)."); DEFVAR_LISP_NOPRO ("default-fill-column", &buffer_defaults.fill_column, "Default value of `fill-column' for buffers that do not override it.\n\ This is the same as (default-value 'fill-column)."); DEFVAR_LISP_NOPRO ("default-left-margin", &buffer_defaults.left_margin, "Default value of `left-margin' for buffers that do not override it.\n\ This is the same as (default-value 'left-margin)."); DEFVAR_LISP_NOPRO ("default-tab-width", &buffer_defaults.tab_width, "Default value of `tab-width' for buffers that do not override it.\n\ This is the same as (default-value 'tab-width)."); DEFVAR_LISP_NOPRO ("default-case-fold-search", &buffer_defaults.case_fold_search, "Default value of `case-fold-search' for buffers that don't override it.\n\ This is the same as (default-value 'case-fold-search)."); DEFVAR_PER_BUFFER ("mode-line-format", ¤t_buffer->mode_line_format, Qnil, 0); /* This doc string is too long for cpp; cpp dies if it isn't in a comment. But make-docfile finds it! DEFVAR_PER_BUFFER ("mode-line-format", ¤t_buffer->mode_line_format, "Template for displaying mode line for current buffer.\n\ Each buffer has its own value of this variable.\n\ Value may be a string, a symbol or a list or cons cell.\n\ For a symbol, its value is used (but it is ignored if t or nil).\n\ A string appearing directly as the value of a symbol is processed verbatim\n\ in that the %-constructs below are not recognized.\n\ For a list whose car is a symbol, the symbol's value is taken,\n\ and if that is non-nil, the cadr of the list is processed recursively.\n\ Otherwise, the caddr of the list (if there is one) is processed.\n\ For a list whose car is a string or list, each element is processed\n\ recursively and the results are effectively concatenated.\n\ For a list whose car is an integer, the cdr of the list is processed\n\ and padded (if the number is positive) or truncated (if negative)\n\ to the width specified by that number.\n\ A string is printed verbatim in the mode line except for %-constructs:\n\ (%-constructs are allowed when the string is the entire mode-line-format\n\ or when it is found in a cons-cell or a list)\n\ %b -- print buffer name. %f -- print visited file name.\n\ %* -- print *, % or hyphen. %m -- print value of mode-name (obsolete).\n\ %s -- print process status. %M -- print value of global-mode-string. (obs)\n\ %p -- print percent of buffer above top of window, or top, bot or all.\n\ %n -- print Narrow if appropriate.\n\ %[ -- print one [ for each recursive editing level. %] similar.\n\ %% -- print %. %- -- print infinitely many dashes.\n\ Decimal digits after the % specify field width to which to pad."); */ DEFVAR_LISP_NOPRO ("default-major-mode", &buffer_defaults.major_mode, "*Major mode for new buffers. Defaults to `fundamental-mode'.\n\ nil here means use current buffer's major mode."); DEFVAR_PER_BUFFER ("major-mode", ¤t_buffer->major_mode, make_number (Lisp_Symbol), "Symbol for current buffer's major mode."); DEFVAR_PER_BUFFER ("mode-name", ¤t_buffer->mode_name, make_number (Lisp_String), "Pretty name of current buffer's major mode (a string)."); DEFVAR_PER_BUFFER ("abbrev-mode", ¤t_buffer->abbrev_mode, Qnil, "Non-nil turns on automatic expansion of abbrevs as they are inserted.\n\ Automatically becomes buffer-local when set in any fashion."); DEFVAR_PER_BUFFER ("case-fold-search", ¤t_buffer->case_fold_search, Qnil, "*Non-nil if searches should ignore case.\n\ Automatically becomes buffer-local when set in any fashion."); DEFVAR_PER_BUFFER ("fill-column", ¤t_buffer->fill_column, make_number (Lisp_Int), "*Column beyond which automatic line-wrapping should happen.\n\ Automatically becomes buffer-local when set in any fashion."); DEFVAR_PER_BUFFER ("left-margin", ¤t_buffer->left_margin, make_number (Lisp_Int), "*Column for the default indent-line-function to indent to.\n\ Linefeed indents to this column in Fundamental mode.\n\ Automatically becomes buffer-local when set in any fashion."); DEFVAR_PER_BUFFER ("tab-width", ¤t_buffer->tab_width, make_number (Lisp_Int), "*Distance between tab stops (for display of tab characters), in columns.\n\ Automatically becomes buffer-local when set in any fashion."); DEFVAR_PER_BUFFER ("ctl-arrow", ¤t_buffer->ctl_arrow, Qnil, "*Non-nil means display control chars with uparrow.\n\ Nil means use backslash and octal digits.\n\ Automatically becomes buffer-local when set in any fashion.\n\ This variable does not apply to characters whose display is specified\n\ in the current display table (if there is one)."); DEFVAR_PER_BUFFER ("truncate-lines", ¤t_buffer->truncate_lines, Qnil, "*Non-nil means do not display continuation lines;\n\ give each line of text one screen line.\n\ Automatically becomes buffer-local when set in any fashion.\n\ \n\ Note that this is overridden by the variable\n\ `truncate-partial-width-windows' if that variable is non-nil\n\ and this buffer is not full-frame width."); DEFVAR_PER_BUFFER ("default-directory", ¤t_buffer->directory, make_number (Lisp_String), "Name of default directory of current buffer. Should end with slash.\n\ Each buffer has its own value of this variable."); DEFVAR_PER_BUFFER ("auto-fill-function", ¤t_buffer->auto_fill_function, Qnil, "Function called (if non-nil) to perform auto-fill.\n\ It is called after self-inserting a space at a column beyond `fill-column'.\n\ Each buffer has its own value of this variable.\n\ NOTE: This variable is not an ordinary hook;\n\ It may not be a list of functions."); DEFVAR_PER_BUFFER ("buffer-file-name", ¤t_buffer->filename, make_number (Lisp_String), "Name of file visited in current buffer, or nil if not visiting a file.\n\ Each buffer has its own value of this variable."); DEFVAR_PER_BUFFER ("buffer-auto-save-file-name", ¤t_buffer->auto_save_file_name, make_number (Lisp_String), "Name of file for auto-saving current buffer,\n\ or nil if buffer should not be auto-saved.\n\ Each buffer has its own value of this variable."); DEFVAR_PER_BUFFER ("buffer-read-only", ¤t_buffer->read_only, Qnil, "Non-nil if this buffer is read-only.\n\ Each buffer has its own value of this variable."); DEFVAR_PER_BUFFER ("buffer-backed-up", ¤t_buffer->backed_up, Qnil, "Non-nil if this buffer's file has been backed up.\n\ Backing up is done before the first time the file is saved.\n\ Each buffer has its own value of this variable."); DEFVAR_PER_BUFFER ("buffer-saved-size", ¤t_buffer->save_length, make_number (Lisp_Int), "Length of current buffer when last read in, saved or auto-saved.\n\ 0 initially.\n\ Each buffer has its own value of this variable."); DEFVAR_PER_BUFFER ("selective-display", ¤t_buffer->selective_display, Qnil, "Non-nil enables selective display:\n\ Integer N as value means display only lines\n\ that start with less than n columns of space.\n\ A value of t means, after a ^M, all the rest of the line is invisible.\n\ Then ^M's in the file are written into files as newlines.\n\n\ Automatically becomes buffer-local when set in any fashion."); #ifndef old DEFVAR_PER_BUFFER ("selective-display-ellipses", ¤t_buffer->selective_display_ellipses, Qnil, "t means display ... on previous line when a line is invisible.\n\ Automatically becomes buffer-local when set in any fashion."); #endif DEFVAR_PER_BUFFER ("overwrite-mode", ¤t_buffer->overwrite_mode, Qnil, "Non-nil if self-insertion should replace existing text.\n\ Automatically becomes buffer-local when set in any fashion."); DEFVAR_PER_BUFFER ("buffer-display-table", ¤t_buffer->display_table, Qnil, "Display table that controls display of the contents of current buffer.\n\ Automatically becomes buffer-local when set in any fashion.\n\ The display table is a vector created with `make-display-table'.\n\ The first 256 elements control how to display each possible text character.\n\ The value should be a \"rope\" (see `make-rope') or nil;\n\ nil means display the character in the default fashion.\n\ The remaining five elements are ropes that control the display of\n\ the end of a truncated screen line (element 256);\n\ the end of a continued line (element 257);\n\ the escape character used to display character codes in octal (element 258);\n\ the character used as an arrow for control characters (element 259);\n\ the decoration indicating the presence of invisible lines (element 260).\n\ If this variable is nil, the value of `standard-display-table' is used.\n\ Each window can have its own, overriding display table."); DEFVAR_PER_BUFFER ("buffer-field-list", ¤t_buffer->fieldlist, Qnil, "List of fields in the current buffer. See `add-field'."); DEFVAR_BOOL ("check-protected-fields", check_protected_fields, "Non-nil means don't allow modification of a protected field.\n\ See `add-field'."); check_protected_fields = 0; /*DEFVAR_LISP ("debug-check-symbol", &Vcheck_symbol, "Don't ask."); */ DEFVAR_LISP ("before-change-function", &Vbefore_change_function, "Function to call before each text change.\n\ Two arguments are passed to the function: the positions of\n\ the beginning and end of the range of old text to be changed.\n\ \(For an insertion, the beginning and end are at the same place.)\n\ No information is given about the length of the text after the change.\n\ position of the change\n\ \n\ While executing the `before-change-function', changes to buffers do not\n\ cause calls to any `before-change-function' or `after-change-function'."); Vbefore_change_function = Qnil; DEFVAR_LISP ("after-change-function", &Vafter_change_function, "Function to call after each text change.\n\ Three arguments are passed to the function: the positions of\n\ the beginning and end of the range of changed text,\n\ and the length of the pre-change text replaced by that range.\n\ \(For an insertion, the pre-change length is zero;\n\ for a deletion, that length is the number of characters deleted,\n\ and the post-change beginning and end are at the same place.)\n\ \n\ While executing the `after-change-function', changes to buffers do not\n\ cause calls to any `before-change-function' or `after-change-function'."); Vafter_change_function = Qnil; DEFVAR_LISP ("first-change-function", &Vfirst_change_function, "Function to call before changing a buffer which is unmodified.\n\ The function is called, with no arguments, if it is non-nil."); Vfirst_change_function = Qnil; DEFVAR_PER_BUFFER ("buffer-undo-list", ¤t_buffer->undo_list, Qnil, "List of undo entries in current buffer.\n\ Recent changes come first; older changes follow newer.\n\ \n\ An entry (START . END) represents an insertion which begins at\n\ position START and ends at position END.\n\ \n\ An entry (TEXT . POSITION) represents the deletion of the string TEXT\n\ from (abs POSITION). If POSITION is positive, point was at the front\n\ of the text being deleted; if negative, point was at the end.\n\ \n\ An entry (t HIGHWORD LOWWORD) indicates that the buffer had been\n\ previously unmodified. HIGHWORD and LOWWORD are the high and low\n\ 16-bit words of the buffer's modification count at the time. If the\n\ modification count of the most recent save is different, this entry is\n\ obsolete.\n\ \n\ nil marks undo boundaries. The undo command treats the changes\n\ between two undo boundaries as a single step to be undone.\n\ \n\ If the value of the variable is t, undo information is not recorded.\n\ "); defsubr (&Sbuffer_list); defsubr (&Sget_buffer); defsubr (&Sget_file_buffer); defsubr (&Sget_buffer_create); defsubr (&Sgenerate_new_buffer_name); defsubr (&Sbuffer_name); /*defsubr (&Sbuffer_number);*/ defsubr (&Sbuffer_file_name); defsubr (&Sbuffer_local_variables); defsubr (&Sbuffer_modified_p); defsubr (&Sset_buffer_modified_p); defsubr (&Sbuffer_modified_tick); defsubr (&Srename_buffer); defsubr (&Sother_buffer); defsubr (&Sbuffer_disable_undo); defsubr (&Sbuffer_enable_undo); defsubr (&Skill_buffer); defsubr (&Serase_buffer); defsubr (&Sswitch_to_buffer); defsubr (&Spop_to_buffer); defsubr (&Scurrent_buffer); defsubr (&Sset_buffer); defsubr (&Sbarf_if_buffer_read_only); defsubr (&Sbury_buffer); defsubr (&Slist_buffers); defsubr (&Skill_all_local_variables); defsubr (&Sregion_fields); } keys_of_buffer () { initial_define_key (control_x_map, 'b', "switch-to-buffer"); initial_define_key (control_x_map, 'k', "kill-buffer"); initial_define_key (control_x_map, Ctl ('B'), "list-buffers"); }