view man/mini.texi @ 36843:2531cdfb9fdb

*** empty log message ***

@c This is part of the Emacs manual.
@c Copyright (C) 1985, 86, 87, 93, 94, 95, 97, 00, 2001
@c   Free Software Foundation, Inc.
@c See file emacs.texi for copying conditions.
@node Minibuffer, M-x, Basic, Top
@chapter The Minibuffer
@cindex minibuffer

  The @dfn{minibuffer} is the facility used by Emacs commands to read
arguments more complicated than a single number.  Minibuffer arguments
can be file names, buffer names, Lisp function names, Emacs command
names, Lisp expressions, and many other things, depending on the command
reading the argument.  You can use the usual Emacs editing commands in
the minibuffer to edit the argument text.

@cindex prompt
  When the minibuffer is in use, it appears in the echo area, and the
terminal's cursor moves there.  The beginning of the minibuffer line
displays a @dfn{prompt} which says what kind of input you should supply and
how it will be used.  Often this prompt is derived from the name of the
command that the argument is for.  The prompt normally ends with a colon.

@cindex default argument
  Sometimes a @dfn{default argument} appears in parentheses after the
colon; it too is part of the prompt.  The default will be used as the
argument value if you enter an empty argument (for example, just type
@key{RET}).  For example, commands that read buffer names always show a
default, which is the name of the buffer that will be used if you type
just @key{RET}.

  The simplest way to enter a minibuffer argument is to type the text
you want, terminated by @key{RET} which exits the minibuffer.  You can
cancel the command that wants the argument, and get out of the
minibuffer, by typing @kbd{C-g}.

  Since the minibuffer uses the screen space of the echo area, it can
conflict with other ways Emacs customarily uses the echo area.  Here is how
Emacs handles such conflicts:

@itemize @bullet
@item
If a command gets an error while you are in the minibuffer, this does
not cancel the minibuffer.  However, the echo area is needed for the
error message and therefore the minibuffer itself is hidden for a
while.  It comes back after a few seconds, or as soon as you type
anything.

@item
If in the minibuffer you use a command whose purpose is to print a
message in the echo area, such as @kbd{C-x =}, the message is printed
normally, and the minibuffer is hidden for a while.  It comes back
after a few seconds, or as soon as you type anything.

@item
Echoing of keystrokes does not take place while the minibuffer is in
use.
@end itemize

@menu
* File: Minibuffer File.  Entering file names with the minibuffer.
* Edit: Minibuffer Edit.  How to edit in the minibuffer.
* Completion::		  An abbreviation facility for minibuffer input.
* Minibuffer History::    Reusing recent minibuffer arguments.
* Repetition::		  Re-executing commands that used the minibuffer.
@end menu

@node Minibuffer File
@section Minibuffers for File Names

  Sometimes the minibuffer starts out with text in it.  For example, when
you are supposed to give a file name, the minibuffer starts out containing
the @dfn{default directory}, which ends with a slash.  This is to inform
you which directory the file will be found in if you do not specify a
directory.

@c Separate paragraph to clean up ugly pagebreak--rms
@need 1500
  For example, the minibuffer might start out with these contents:

@example
Find File: /u2/emacs/src/
@end example

@noindent
where @samp{Find File:@: } is the prompt.  Typing @kbd{buffer.c}
specifies the file @file{/u2/emacs/src/buffer.c}.  To find files in
nearby directories, use @kbd{..}; thus, if you type
@kbd{../lisp/simple.el}, you will get the file named
@file{/u2/emacs/lisp/simple.el}.  Alternatively, you can kill with
@kbd{M-@key{DEL}} the directory names you don't want (@pxref{Words}).

  If you don't want any of the default, you can kill it with @kbd{C-a
C-k}.  But you don't need to kill the default; you can simply ignore it.
Insert an absolute file name, one starting with a slash or a tilde,
after the default directory.  For example, to specify the file
@file{/etc/termcap}, just insert that name, giving these minibuffer
contents:

@example
Find File: /u2/emacs/src//etc/termcap
@end example

@noindent
@cindex // in file name
@cindex double slash in file name
@cindex slashes repeated in file name
GNU Emacs gives a special meaning to a double slash (which is not
normally a useful thing to write): it means, ``ignore everything before
the second slash in the pair.''  Thus, @samp{/u2/emacs/src/} is ignored
in the example above, and you get the file @file{/etc/termcap}.

  If you set @code{insert-default-directory} to @code{nil}, the default
directory is not inserted in the minibuffer.  This way, the minibuffer
starts out empty.  But the name you type, if relative, is still
interpreted with respect to the same default directory.

@node Minibuffer Edit
@section Editing in the Minibuffer

  The minibuffer is an Emacs buffer (albeit a peculiar one), and the usual
Emacs commands are available for editing the text of an argument you are
entering.

  Since @key{RET} in the minibuffer is defined to exit the minibuffer,
you can't use it to insert a newline in the minibuffer.  To do that,
type @kbd{C-o} or @kbd{C-q C-j}.  (Recall that a newline is really the
character control-J.)

  The minibuffer has its own window which always has space on the screen
but acts as if it were not there when the minibuffer is not in use.  When
the minibuffer is in use, its window is just like the others; you can
switch to another window with @kbd{C-x o}, edit text in other windows and
perhaps even visit more files, before returning to the minibuffer to submit
the argument.  You can kill text in another window, return to the
minibuffer window, and then yank the text to use it in the argument.
@xref{Windows}.

@cindex height of minibuffer
@cindex size of minibuffer
@cindex growing minibuffer
@cindex resizing minibuffer
  There are some restrictions on the use of the minibuffer window,
however.  You cannot switch buffers in it---the minibuffer and its
window are permanently attached.  Also, you cannot split or kill the
minibuffer window.  But you can make it taller in the normal fashion
with @kbd{C-x ^}.

@vindex resize-mini-windows
  The minibuffer window expands vertically as necessary to hold the text
that you put in the minibuffer if @code{resize-mini-windows} is
non-@code{nil}.  If @code{resize-mini-windows} is @code{t}, the window
is always resized to fit the size of the text it displays.  If
@code{resize-mini-windows} is the symbol @code{grow-only}, the window
is enlarged only, until it becomes empty again, at which point it
shrinks to its normal size again.

@vindex max-mini-window-height
  The variable @code{max-mini-window-height} controls the maximum
height for resizing the minibuffer window: a floating-point number
specifies a fraction of the frame's height; an integer specifies the
maximum number of lines; @code{nil} means do not resize the minibuffer
window automatically.  The default value is 0.25.

  If while in the minibuffer you issue a command that displays help text
of any sort in another window, you can use the @kbd{C-M-v} command while
in the minibuffer to scroll the help text.  This lasts until you exit
the minibuffer.  This feature is especially useful if a completing
minibuffer gives you a list of possible completions.  @xref{Other Window}.

@vindex enable-recursive-minibuffers
  Emacs normally disallows most commands that use the minibuffer while
the minibuffer is active.  This rule is to prevent recursive minibuffers
from confusing novice users.  If you want to be able to use such
commands in the minibuffer, set the variable
@code{enable-recursive-minibuffers} to a non-@code{nil} value.

@node Completion
@section Completion
@cindex completion

  For certain kinds of arguments, you can use @dfn{completion} to enter
the argument value.  Completion means that you type part of the
argument, then Emacs visibly fills in the rest, or as much as
can be determined from the part you have typed.

  When completion is available, certain keys---@key{TAB}, @key{RET}, and
@key{SPC}---are rebound to complete the text present in the minibuffer
into a longer string that it stands for, by matching it against a set of
@dfn{completion alternatives} provided by the command reading the
argument.  @kbd{?} is defined to display a list of possible completions
of what you have inserted.

  For example, when @kbd{M-x} uses the minibuffer to read the name of a
command, it provides a list of all available Emacs command names to
complete against.  The completion keys match the text in the minibuffer
against all the command names, find any additional name characters
implied by the ones already present in the minibuffer, and add those
characters to the ones you have given.  This is what makes it possible
to type @kbd{M-x ins @key{SPC} b @key{RET}} instead of @kbd{M-x
insert-buffer @key{RET}} (for example).

  Case is normally significant in completion, because it is significant
in most of the names that you can complete (buffer names, file names and
command names).  Thus, @samp{fo} does not complete to @samp{Foo}.
Completion does ignore case distinctions for certain arguments in which
case does not matter.

@menu
* Example: Completion Example.
* Commands: Completion Commands.
* Strict Completion::
* Options: Completion Options.
@end menu

@node Completion Example
@subsection Completion Example

@kindex TAB @r{(completion)}
@findex minibuffer-complete
  A concrete example may help here.  If you type @kbd{M-x au @key{TAB}},
the @key{TAB} looks for alternatives (in this case, command names) that
start with @samp{au}.  There are several, including
@code{auto-fill-mode} and @code{auto-save-mode}---but they are all the
same as far as @code{auto-}, so the @samp{au} in the minibuffer changes
to @samp{auto-}.@refill

  If you type @key{TAB} again immediately, there are multiple
possibilities for the very next character---it could be any of
@samp{cfilrs}---so no more characters are added; instead, @key{TAB}
displays a list of all possible completions in another window.

  If you go on to type @kbd{f @key{TAB}}, this @key{TAB} sees
@samp{auto-f}.  The only command name starting this way is
@code{auto-fill-mode}, so completion fills in the rest of that.  You now
have @samp{auto-fill-mode} in the minibuffer after typing just @kbd{au
@key{TAB} f @key{TAB}}.  Note that @key{TAB} has this effect because in
the minibuffer it is bound to the command @code{minibuffer-complete}
when completion is available.

@node Completion Commands
@subsection Completion Commands

  Here is a list of the completion commands defined in the minibuffer
when completion is available.

@table @kbd
@item @key{TAB}
Complete the text in the minibuffer as much as possible
(@code{minibuffer-complete}).
@item @key{SPC}
Complete the minibuffer text, but don't go beyond one word
(@code{minibuffer-complete-word}).
@item @key{RET}
Submit the text in the minibuffer as the argument, possibly completing
first as described below (@code{minibuffer-complete-and-exit}).
@item ?
Print a list of all possible completions of the text in the minibuffer
(@code{minibuffer-list-completions}).
@end table

@kindex SPC
@findex minibuffer-complete-word
  @key{SPC} completes much like @key{TAB}, but never goes beyond the
next hyphen or space.  If you have @samp{auto-f} in the minibuffer and
type @key{SPC}, it finds that the completion is @samp{auto-fill-mode},
but it stops completing after @samp{fill-}.  This gives
@samp{auto-fill-}.  Another @key{SPC} at this point completes all the
way to @samp{auto-fill-mode}.  @key{SPC} in the minibuffer when
completion is available runs the command
@code{minibuffer-complete-word}.

  Here are some commands you can use to choose a completion from a
window that displays a list of completions:

@table @kbd
@findex mouse-choose-completion
@item Mouse-2
Clicking mouse button 2 on a completion in the list of possible
completions chooses that completion (@code{mouse-choose-completion}).
You normally use this command while point is in the minibuffer; but you
must click in the list of completions, not in the minibuffer itself.

@findex switch-to-completions
@item @key{PRIOR}
@itemx M-v
Typing @key{PRIOR} or @key{PAGE-UP}, or @kbd{M-v}, while in the
minibuffer, selects the window showing the completion list buffer
(@code{switch-to-completions}).  This paves the way for using the
commands below.  (Selecting that window in the usual ways has the same
effect, but this way is more convenient.)

@findex choose-completion
@item @key{RET}
Typing @key{RET} @emph{in the completion list buffer} chooses the
completion that point is in or next to (@code{choose-completion}).  To
use this command, you must first switch windows to the window that shows
the list of completions.

@findex next-completion
@item @key{RIGHT}
Typing the right-arrow key @key{RIGHT} @emph{in the completion list
buffer} moves point to the following completion (@code{next-completion}).

@findex previous-completion
@item @key{LEFT}
Typing the left-arrow key @key{LEFT} @emph{in the completion list
buffer} moves point toward the beginning of the buffer, to the previous
completion (@code{previous-completion}).
@end table

@node Strict Completion
@subsection Strict Completion

  There are three different ways that @key{RET} can work in completing
minibuffers, depending on how the argument will be used.

@itemize @bullet
@item
@dfn{Strict} completion is used when it is meaningless to give any
argument except one of the known alternatives.  For example, when
@kbd{C-x k} reads the name of a buffer to kill, it is meaningless to
give anything but the name of an existing buffer.  In strict
completion, @key{RET} refuses to exit if the text in the minibuffer
does not complete to an exact match.

@item
@dfn{Cautious} completion is similar to strict completion, except that
@key{RET} exits only if the text was an exact match already, not
needing completion.  If the text is not an exact match, @key{RET} does
not exit, but it does complete the text.  If it completes to an exact
match, a second @key{RET} will exit.

Cautious completion is used for reading file names for files that must
already exist.

@item
@dfn{Permissive} completion is used when any string whatever is
meaningful, and the list of completion alternatives is just a guide.
For example, when @kbd{C-x C-f} reads the name of a file to visit, any
file name is allowed, in case you want to create a file.  In
permissive completion, @key{RET} takes the text in the minibuffer
exactly as given, without completing it.
@end itemize

  The completion commands display a list of all possible completions in
a window whenever there is more than one possibility for the very next
character.  Also, typing @kbd{?} explicitly requests such a list.  If
the list of completions is long, you can scroll it with @kbd{C-M-v}
(@pxref{Other Window}).

@node Completion Options
@subsection Completion Options

@vindex completion-ignored-extensions
@cindex ignored file names, in completion
  When completion is done on file names, certain file names are usually
ignored.  The variable @code{completion-ignored-extensions} contains a
list of strings; a file whose name ends in any of those strings is
ignored as a possible completion.  The standard value of this variable
has several elements including @code{".o"}, @code{".elc"}, @code{".dvi"}
and @code{"~"}.  The effect is that, for example, @samp{foo} can
complete to @samp{foo.c} even though @samp{foo.o} exists as well.
However, if @emph{all} the possible completions end in ``ignored''
strings, then they are not ignored.  Ignored extensions do not apply to
lists of completions---those always mention all possible completions.

@vindex completion-auto-help
  Normally, a completion command that finds the next character is undetermined
automatically displays a list of all possible completions.  If the variable
@code{completion-auto-help} is set to @code{nil}, this does not happen,
and you must type @kbd{?} to display the possible completions.

@cindex Partial Completion mode
@vindex partial-completion-mode
@findex partial-completion-mode
  Partial Completion mode implements a more powerful kind of
completion that can complete multiple words in parallel.  For example,
it can complete the command name abbreviation @code{p-b} into
@code{print-buffer}, because no other command starts with two words
whose initials are @samp{p} and @samp{b}.

  Partial completion of directories in file names uses @samp{*} to
indicate the places for completion; thus, @file{/u*/b*/f*} might
complete to @file{/usr/bin/foo}.

  To enable this mode, use the command @kbd{M-x
partial-completion-mode}, or customize the option
@code{partial-completion-mode}.  This binds the partial completion
commands to @key{TAB}, @key{SPC}, @key{RET}, and @kbd{?}.  The usual
completion commands are available on @kbd{M-@key{TAB}},
@kbd{M-@key{SPC}}, @kbd{M-@key{RET}} and @kbd{M-?}.

@vindex PC-include-file-path
@vindex PC-disable-includes
  Another feature of Partial Completion mode is to extend
@code{find-file} so that the @samp{<@var{include}>} stands for the
file named @var{include} in some directory in the path
@code{PC-include-file-path}.  If you set @code{PC-disable-includes} to
non-@code{nil}, this feature is disabled.

@cindex Icomplete mode
@findex icomplete-mode
  Icomplete mode presents a constantly-updated display that tells you
what completions are available for the text you've entered so far.  The
command to enable or disable this minor mode is @kbd{M-x
icomplete-mode}.

@node Minibuffer History
@section Minibuffer History
@cindex minibuffer history
@cindex history of minibuffer input

  Every argument that you enter with the minibuffer is saved on a
@dfn{minibuffer history list} so that you can use it again later in
another argument.  Special commands load the text of an earlier argument
in the minibuffer.  They discard the old minibuffer contents, so you can
think of them as moving through the history of previous arguments.

@table @kbd
@item @key{UP}
@itemx M-p
Move to the next earlier argument string saved in the minibuffer history
(@code{previous-history-element}).
@item @key{DOWN}
@itemx M-n
Move to the next later argument string saved in the minibuffer history
(@code{next-history-element}).
@item M-r @var{regexp} @key{RET}
Move to an earlier saved argument in the minibuffer history that has a
match for @var{regexp} (@code{previous-matching-history-element}).
@item M-s @var{regexp} @key{RET}
Move to a later saved argument in the minibuffer history that has a
match for @var{regexp} (@code{next-matching-history-element}).
@end table

@kindex M-p @r{(minibuffer history)}
@kindex M-n @r{(minibuffer history)}
@findex next-history-element
@findex previous-history-element
  The simplest way to reuse the saved arguments in the history list is
to move through the history list one element at a time.  While in the
minibuffer, use @kbd{M-p} or up-arrow (@code{previous-history-element})
to ``move to'' the next earlier minibuffer input, and use @kbd{M-n} or
down-arrow (@code{next-history-element}) to ``move to'' the next later
input.

  The previous input that you fetch from the history entirely replaces
the contents of the minibuffer.  To use it as the argument, exit the
minibuffer as usual with @key{RET}.  You can also edit the text before
you reuse it; this does not change the history element that you
``moved'' to, but your new argument does go at the end of the history
list in its own right.

  For many minibuffer arguments there is a ``default'' value.  In some
cases, the minibuffer history commands know the default value.  Then you
can insert the default value into the minibuffer as text by using
@kbd{M-n} to move ``into the future'' in the history.  Eventually we
hope to make this feature available whenever the minibuffer has a
default value.

@findex previous-matching-history-element
@findex next-matching-history-element
@kindex M-r @r{(minibuffer history)}
@kindex M-s @r{(minibuffer history)}
  There are also commands to search forward or backward through the
history; they search for history elements that match a regular
expression that you specify with the minibuffer.  @kbd{M-r}
(@code{previous-matching-history-element}) searches older elements in
the history, while @kbd{M-s} (@code{next-matching-history-element})
searches newer elements.  By special dispensation, these commands can
use the minibuffer to read their arguments even though you are already
in the minibuffer when you issue them.  As with incremental searching,
an upper-case letter in the regular expression makes the search
case-sensitive (@pxref{Search Case}).

@ignore
  We may change the precise way these commands read their arguments.
Perhaps they will search for a match for the string given so far in the
minibuffer; perhaps they will search for a literal match rather than a
regular expression match; perhaps they will only accept matches at the
beginning of a history element; perhaps they will read the string to
search for incrementally like @kbd{C-s}.  To find out what interface is
actually available, type @kbd{C-h f previous-matching-history-element}.
@end ignore

  All uses of the minibuffer record your input on a history list, but
there are separate history lists for different kinds of arguments.  For
example, there is a list for file names, used by all the commands that
read file names.  (As a special feature, this history list records
the absolute file name, no more and no less, even if that is not how
you entered the file name.)

  There are several other very specific history lists, including one for
command names read by @kbd{M-x}, one for buffer names, one for arguments
of commands like @code{query-replace}, and one for compilation commands
read by @code{compile}.  Finally, there is one ``miscellaneous'' history
list that most minibuffer arguments use.

@vindex history-length
  The variable @code{history-length} specifies the maximum length of a
minibuffer history list; once a list gets that long, the oldest element
is deleted each time an element is added.  If the value of
@code{history-length} is @code{t}, though, there is no maximum length
and elements are never deleted.

@node Repetition
@section Repeating Minibuffer Commands
@cindex command history
@cindex history of commands

  Every command that uses the minibuffer at least once is recorded on a
special history list, together with the values of its arguments, so that
you can repeat the entire command.  In particular, every use of
@kbd{M-x} is recorded there, since @kbd{M-x} uses the minibuffer to read
the command name.

@findex list-command-history
@c widecommands
@table @kbd
@item C-x @key{ESC} @key{ESC}
Re-execute a recent minibuffer command (@code{repeat-complex-command}).
@item M-x list-command-history
Display the entire command history, showing all the commands
@kbd{C-x @key{ESC} @key{ESC}} can repeat, most recent first.
@end table

@kindex C-x ESC ESC
@findex repeat-complex-command
  @kbd{C-x @key{ESC} @key{ESC}} is used to re-execute a recent
minibuffer-using command.  With no argument, it repeats the last such
command.  A numeric argument specifies which command to repeat; one
means the last one, and larger numbers specify earlier ones.

  @kbd{C-x @key{ESC} @key{ESC}} works by turning the previous command
into a Lisp expression and then entering a minibuffer initialized with
the text for that expression.  If you type just @key{RET}, the command
is repeated as before.  You can also change the command by editing the
Lisp expression.  Whatever expression you finally submit is what will be
executed.  The repeated command is added to the front of the command
history unless it is identical to the most recently executed command
already there.

  Even if you don't understand Lisp syntax, it will probably be obvious
which command is displayed for repetition.  If you do not change the
text, it will repeat exactly as before.

  Once inside the minibuffer for @kbd{C-x @key{ESC} @key{ESC}}, you can
use the minibuffer history commands (@kbd{M-p}, @kbd{M-n}, @kbd{M-r},
@kbd{M-s}; @pxref{Minibuffer History}) to move through the history list
of saved entire commands.  After finding the desired previous command,
you can edit its expression as usual and then resubmit it by typing
@key{RET} as usual.

@vindex command-history
  The list of previous minibuffer-using commands is stored as a Lisp
list in the variable @code{command-history}.  Each element is a Lisp
expression which describes one command and its arguments.  Lisp programs
can re-execute a command by calling @code{eval} with the
@code{command-history} element.