Mercurial > emacs
view Makefile.in @ 38136:278f2295cde6
New node Program Misc; text about word and paragraph and selective
display features moved there.
Major rewrite of Programming Modes node.
Mention font lock and compilation commands in initial list of
capabilities.
Rewrite explanation of C-M- convention.
In Basic Indent, add intro text.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Wed, 20 Jun 2001 10:57:04 +0000 |
parents | 95ff5c14d76c |
children | 52c641ec7c4b |
line wrap: on
line source
# DIST: This is the distribution Makefile for Emacs. configure can # DIST: make most of the changes to this file you might want, so try # DIST: that first. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001 Free Software Foundation, Inc. # This file is part of GNU Emacs. # GNU Emacs is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # GNU Emacs is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with GNU Emacs; see the file COPYING. If not, write to # the Free Software Foundation, Inc., 59 Temple Place - Suite 330, # Boston, MA 02111-1307, USA. # make all to compile and build Emacs. # make install to install it. # make TAGS to update tags tables. # # make clean or make mostlyclean # Delete all files from the current directory that are normally # created by building the program. Don't delete the files that # record the configuration. Also preserve files that could be made # by building, but normally aren't because the distribution comes # with them. # # Delete `.dvi' files here if they are not part of the distribution. # # make distclean # Delete all files from the current directory that are created by # configuring or building the program. If you have unpacked the # source and built the program without creating any other files, # `make distclean' should leave only the files that were in the # distribution. # # make maintainer-clean # Delete everything from the current directory that can be # reconstructed with this Makefile. This typically includes # everything deleted by distclean, plus more: C source files # produced by Bison, tags tables, info files, and so on. # # make extraclean # Still more severe - delete backup and autosave files, too. SHELL = /bin/sh # If Make doesn't predefine MAKE, set it here. @SET_MAKE@ # ==================== Things `configure' Might Edit ==================== CC=@CC@ CPP=@CPP@ C_SWITCH_SYSTEM=@c_switch_system@ ALLOCA=@ALLOCA@ LN_S=@LN_S@ CFLAGS=@CFLAGS@ LDFLAGS=@LDFLAGS@ CPPFLAGS=@CPPFLAGS@ C_SWITCH_X_SITE=@C_SWITCH_X_SITE@ LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@ YACC=@YACC@ ### These help us choose version- and architecture-specific directories ### to install files in. ### This should be the number of the Emacs version we're building, ### like `18.59' or `19.0'. version=@version@ ### This should be the name of the configuration we're building Emacs ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'. configuration=@configuration@ # ==================== Where To Install Things ==================== # The default location for installation. Everything is placed in # subdirectories of this directory. The default values for many of # the variables below are expressed in terms of this one, so you may # not need to change them. This defaults to /usr/local. prefix=@prefix@ # Like `prefix', but used for architecture-specific files. exec_prefix=@exec_prefix@ # Where to install Emacs and other binaries that people will want to # run directly (like etags). bindir=@bindir@ # Where to install architecture-independent data files. ${lispdir} # and ${etcdir} are subdirectories of this. datadir=@datadir@ # Where to install and expect the files that Emacs modifies as it # runs. These files are all architecture-independent. # Right now, this is not used. sharedstatedir=@sharedstatedir@ # Where to install and expect executable files to be run by Emacs # rather than directly by users, and other architecture-dependent # data. ${archlibdir} is a subdirectory of this. libexecdir=@libexecdir@ # Where to install Emacs's man pages, and what extension they should have. mandir=@mandir@ manext=.1 man1dir=$(mandir)/man1 # Where to install and expect the info files describing Emacs. In the # past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but # since there are now many packages documented with the texinfo # system, it is inappropriate to imply that it is part of Emacs. infodir=@infodir@ # Where to look for bitmap files. bitmapdir=@bitmapdir@ # Where to find the source code. The source code for Emacs's C kernel is # expected to be in ${srcdir}/src, and the source code for Emacs's # utility programs is expected to be in ${srcdir}/lib-src. This is # set by the configure script's `--srcdir' option. # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH. srcdir=@srcdir@ # Tell make where to find source files; this is needed for the makefiles. VPATH=@srcdir@ # Where to find the application default. x_default_search_path=@x_default_search_path@ # ==================== Emacs-specific directories ==================== # These variables hold the values Emacs will actually use. They are # based on the values of the standard Make variables above. # Where to install the lisp files distributed with # Emacs. This includes the Emacs version, so that the # lisp files for different versions of Emacs will install # themselves in separate directories. lispdir=@lispdir@ # Directories Emacs should search for lisp files specific # to this site (i.e. customizations), before consulting # ${lispdir}. This should be a colon-separated list of # directories. locallisppath=@locallisppath@ # Where Emacs will search to find its lisp files. Before # changing this, check to see if your purpose wouldn't # better be served by changing locallisppath. This # should be a colon-separated list of directories. lisppath=@lisppath@ # Where Emacs will search for its lisp files while # building. This is only used during the process of # compiling Emacs, to help Emacs find its lisp files # before they've been installed in their final location. # It's usually identical to lisppath, except that # it does not include locallisppath, and the # entry for the directory containing the installed lisp # files has been replaced with ../lisp. This should be a # colon-separated list of directories. buildlisppath=${srcdir}/lisp # Where to install the other architecture-independent # data files distributed with Emacs (like the tutorial, # the cookie recipes and the Zippy database). This path # usually contains the Emacs version number, so the data # files for multiple versions of Emacs may be installed # at once. etcdir=@etcdir@ # Where to put executables to be run by Emacs rather than # the user. This path usually includes the Emacs version # and configuration name, so that multiple configurations # for multiple versions of Emacs may be installed at # once. archlibdir=@archlibdir@ # Where to put the docstring file. docdir=@docdir@ # ==================== Utility Programs for the Build ==================== # Allow the user to specify the install program. INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_INFO = install-info # By default, we uphold the dignity of our programs. INSTALL_STRIP = # ============================= Targets ============================== # What emacs should be called when installed. EMACS = emacs # Subdirectories to make recursively. `lisp' is not included # because the compiled lisp files are part of the distribution # and you cannot remake them without installing Emacs first. # leim is not included because it needs special handling. SUBDIR = lib-src src # The makefiles of the directories in $SUBDIR. SUBDIR_MAKEFILES = lib-src/Makefile man/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile leim/Makefile # Subdirectories to install, and where they'll go. # lib-src's makefile knows how to install it, so we don't do that here. # leim's makefile also knows how to install it, so we don't do that here. # When installing the info files, we need to do special things to # avoid nuking an existing dir file, so we don't do that here; # instead, we have written out explicit code in the `install' targets. COPYDIR = ${srcdir}/etc ${srcdir}/lisp COPYDESTS = ${etcdir} ${lispdir} all: ${SUBDIR} leim removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g' # Generate epaths.h from epaths.in. This target is invoked by `configure'. epaths-force: FRC @(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \ buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \ x_default_search_path=`echo ${x_default_search_path}`; \ sed < ${srcdir}/src/epaths.in > epaths.h.$$$$ \ -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \ -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \ -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \ -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \ -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \ -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \ -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \ -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";') && \ ${srcdir}/move-if-change epaths.h.$$$$ src/epaths.h # For parallel make, src should be build before leim. # "export PARALLEL=0" is for SGI's Make, to prevent it from # running more than 1 process in the leim directory, especially for # the $TIT files there. leim: src ${SUBDIR_MAKEFILES} FRC (export PARALLEL; PARALLEL=0; cd $@; $(MAKE) all $(MFLAGS) \ CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \ LDFLAGS='${LDFLAGS}' MAKE='${MAKE}') src: lib-src FRC lib-src: FRC src/config.stamp .RECURSIVE: ${SUBDIR} leim ${SUBDIR}: ${SUBDIR_MAKEFILES} FRC cd $@; $(MAKE) all $(MFLAGS) \ CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \ LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' blessmail: ${SUBDIR_MAKEFILES} src FRC cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \ MAKE='${MAKE}' archlibdir='$(archlibdir)' Makefile: $(srcdir)/Makefile.in config.status ./config.status config.status: ${srcdir}/configure ./config.status --recheck ${srcdir}/configure: configure.in aclocal.m4 cd ${srcdir} && autoconf src/Makefile: $(srcdir)/src/Makefile.in config.status ./config.status src/config.stamp: $(srcdir)/src/config.in config.status ./config.status touch src/config.stamp lib-src/Makefile: $(srcdir)/lib-src/Makefile.in config.status ./config.status man/Makefile: $(srcdir)/man/Makefile.in config.status ./config.status oldXMenu/Makefile: $(srcdir)/oldXMenu/Makefile.in config.status ./config.status lwlib/Makefile: $(srcdir)/lwlib/Makefile.in config.status ./config.status leim/Makefile: $(srcdir)/leim/Makefile.in config.status ./config.status # ==================== Installation ==================== ## If we let lib-src do its own installation, that means we ## don't have to duplicate the list of utilities to install in ## this Makefile as well. ## On AIX, use tar xBf. ## On Xenix, use tar xpf. .PHONY: install mkdir ## We delete each directory in ${COPYDESTS} before we copy into it; ## that way, we can reinstall over directories that have been put in ## place with their files read-only (perhaps because they are checked ## into RCS). In order to make this safe, we make sure that the ## source exists and is distinct from the destination. ### We do install-arch-indep first because ### the executable needs the Lisp files and DOC file to work properly. install: all install-arch-indep install-arch-dep install-leim blessmail @true ### Install the executables that were compiled specifically for this machine. ### It would be nice to do something for a parallel make ### to ensure that install-arch-indep finishes before this starts. install-arch-dep: mkdir (cd lib-src; \ $(MAKE) install $(MFLAGS) prefix=${prefix} \ exec_prefix=${exec_prefix} bindir=${bindir} \ libexecdir=${libexecdir} archlibdir=${archlibdir} \ INSTALL_STRIP=${INSTALL_STRIP}) ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs ${bindir}/emacs-${version} -chmod 1755 ${bindir}/emacs-${version} rm -f ${bindir}/$(EMACS) -ln ${bindir}/emacs-${version} ${bindir}/$(EMACS) -unset CDPATH; \ for f in `cd lib-src && echo fns-*.el`; do \ if test -r lib-src/$$f ; then \ ${INSTALL_DATA} lib-src/$$f ${archlibdir}/$$f; \ else true; fi ; \ done ### Install the files that are machine-independent. ### Most of them come straight from the distribution; ### the exception is the DOC-* files, which are copied ## from the build directory. ## Note that we copy DOC* and then delete DOC ## as a workaround for a bug in tar on Ultrix 4.2. install-arch-indep: mkdir info -set ${COPYDESTS} ; \ unset CDPATH; \ for dir in ${COPYDIR} ; do \ if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \ rm -rf $$1 ; \ fi ; \ shift ; \ done -set ${COPYDESTS} ; \ mkdir ${COPYDESTS} ; \ chmod ugo+rx ${COPYDESTS} ; \ unset CDPATH; \ for dir in ${COPYDIR} ; do \ dest=$$1 ; shift ; \ [ -d $${dir} ] \ && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \ && (echo "Copying $${dir} to $${dest}..." ; \ (cd $${dir}; tar -cf - . ) \ | (cd $${dest}; umask 022; \ tar -xvf - && cat > /dev/null) || exit 1; \ for subdir in `find $${dest} -type d ! -name RCS ! -name CVS -print` ; do \ chmod a+rx $${subdir} ; \ rm -rf $${subdir}/RCS ; \ rm -rf $${subdir}/CVS ; \ rm -f $${subdir}/.cvsignore ; \ rm -f $${subdir}/\#* ; \ rm -f $${subdir}/.\#* ; \ rm -f $${subdir}/*~ ; \ rm -f $${subdir}/*.orig ; \ rm -f $${subdir}/[mM]akefile* ; \ rm -f $${subdir}/ChangeLog* ; \ rm -f $${subdir}/dired.todo ; \ done) ; \ done -rm -f ${lispdir}/subdirs.el $(srcdir)/update-subdirs ${lispdir} if [ -f ${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \ then true; \ else \ (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \ echo " (normal-top-level-add-subdirs-to-load-path))") \ > ${datadir}/emacs/${version}/site-lisp/subdirs.el; \ fi chmod a+r ${datadir}/emacs/${version}/site-lisp/subdirs.el -if [ -f ${datadir}/emacs/site-lisp/subdirs.el ]; \ then true; \ else \ (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \ echo " (normal-top-level-add-subdirs-to-load-path))") \ > ${datadir}/emacs/site-lisp/subdirs.el; \ fi -chmod a+r ${datadir}/emacs/site-lisp/subdirs.el -unset CDPATH; \ if [ `(cd ./etc; /bin/pwd)` != `(cd ${docdir}; /bin/pwd)` ]; \ then \ echo "Copying etc/DOC-* to ${docdir} ..." ; \ (cd ./etc; tar -cf - DOC*) \ |(cd ${docdir}; umask 0; tar -xvf - && cat > /dev/null) || exit 1; \ (cd $(docdir); chmod a+r DOC*; rm DOC); \ else true; fi -unset CDPATH; \ if [ -r ./lisp ] \ && [ -r ./lisp/simple.el ] \ && [ x`(cd ./lisp; /bin/pwd)` != x`(cd ${lispdir}; /bin/pwd)` ] \ && [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ./lisp; /bin/pwd)` ]; \ then \ echo "Copying lisp/*.el and lisp/*.elc to ${lispdir} ..." ; \ (cd lisp; tar -cf - *.el *.elc) \ |(cd ${lispdir}; umask 0; tar -xvf - && cat > /dev/null) || exit 1; \ else true; fi -unset CDPATH; \ thisdir=`/bin/pwd`; \ if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \ then \ (cd ${infodir}; \ if [ -f dir ]; then true; \ else \ (cd $${thisdir}; \ ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir; \ chmod a+r ${infodir}/dir); \ fi; \ cd ${srcdir}/info ; \ for f in ada-mode* autotype* ccmode* cl* dired-x* ebrowse* ediff* efaq* emacs* eshell* eudc* forms* gnus* idlwave* info* message* mh-e* pcl-cvs* reftex* sc* speedbar* vip* widget* woman*; do \ (cd $${thisdir}; \ ${INSTALL_DATA} ${srcdir}/info/$$f ${infodir}/$$f; \ chmod a+r ${infodir}/$$f); \ done); \ else true; fi -unset CDPATH; \ thisdir=`/bin/pwd`; \ if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \ then \ for f in ada-mode autotype ccmode cl dired-x ebrowse ediff efaq emacs emacs-mime eshell eudc forms gnus idlwave info message mh-e pcl-cvs reftex sc speedbar vip viper widget woman; do \ (cd $${thisdir}; \ ${INSTALL_INFO} --info-dir=${infodir} ${infodir}/$$f); \ done; \ else true; fi -chmod -R a+r ${datadir}/emacs ${COPYDESTS} ${infodir} thisdir=`/bin/pwd`; \ cd ${srcdir}/etc; \ for page in emacs etags ctags gfdl ; do \ (cd $${thisdir}; \ ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${man1dir}/$${page}${manext}; \ chmod a+r ${man1dir}/$${page}${manext}); \ done ### Install LEIM files. Although they are machine-independent, we ### have separate target here instead of including it in ### `install-arch-indep'. People who extracted LEIM files after they ### insalled Emacs itself can install only LEIM files by this target. install-leim: leim/Makefile mkdir cd leim; $(MAKE) install ### Build Emacs and install it, stripping binaries while installing them. install-strip: $(MAKE) INSTALL_STRIP=-s install ### Build all the directories we're going to install Emacs in. Since ### we may be creating several layers of directories (for example, ### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs ### instead of mkdir. Not all systems' mkdir programs have the `-p' flag. mkdir: FRC if [ -d ${datadir} ]; then true; else \ $(srcdir)/mkinstalldirs ${datadir}; \ chmod a+r ${datadir};\ fi $(srcdir)/mkinstalldirs ${COPYDESTS} ${infodir} ${man1dir} \ ${bindir} ${docdir} ${libexecdir} \ ${datadir}/emacs/site-lisp \ ${datadir}/emacs/${version}/site-lisp \ `echo ${locallisppath} | sed 's/:/ /g'` ### Delete all the installed files that the `install' target would ### create (but not the noninstalled files such as `make all' would ### create). ### ### Don't delete the lisp and etc directories if they're in the source tree. uninstall: (cd lib-src; \ $(MAKE) $(MFLAGS) uninstall \ prefix=${prefix} exec_prefix=${exec_prefix} \ bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}) -unset CDPATH; \ for dir in ${lispdir} ${etcdir} ; do \ if [ -d $${dir} ]; then \ case `(cd $${dir} ; /bin/pwd)` in \ `(cd ${srcdir} ; /bin/pwd)`* ) ;; \ * ) rm -rf $${dir} ;; \ esac ; \ case $${dir} in \ ${datadir}/emacs/${version}/* ) \ rm -rf ${datadir}/emacs/${version} \ ;; \ esac ; \ fi ; \ done (cd ${archlibdir} && rm -f fns-*) -rm -rf ${libexecdir}/emacs/${version} (cd ${infodir} && rm -f cl* ada-mode* autotype* ccmode* ebrowse* efaq* eshell* eudc* idlwave* message* pcl-cvs* reftex* speedbar* widget* woman* dired-x* ediff* emacs* forms* gnus* info* mh-e* sc* vip*) (cd ${man1dir} && rm -f emacs.1 etags.1 ctags.1) (cd ${bindir} && rm -f emacs-${version} $(EMACS)) FRC: # ==================== Cleaning up and miscellanea ==================== .PHONY: mostlyclean clean distclean maintainer-clean extraclean ### `mostlyclean' ### Like `clean', but may refrain from deleting a few files that people ### normally don't want to recompile. For example, the `mostlyclean' ### target for GCC does not delete `libgcc.a', because recompiling it ### is rarely necessary and takes a lot of time. mostlyclean: FRC (cd src; $(MAKE) $(MFLAGS) mostlyclean) (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean) (cd lwlib; $(MAKE) $(MFLAGS) mostlyclean) (cd lib-src; $(MAKE) $(MFLAGS) mostlyclean) -(cd man && $(MAKE) $(MFLAGS) mostlyclean) (cd leim; $(MAKE) $(MFLAGS) mostlyclean) ### `clean' ### Delete all files from the current directory that are normally ### created by building the program. Don't delete the files that ### record the configuration. Also preserve files that could be made ### by building, but normally aren't because the distribution comes ### with them. ### ### Delete `.dvi' files here if they are not part of the distribution. clean: FRC (cd src; $(MAKE) $(MFLAGS) clean) (cd oldXMenu; $(MAKE) $(MFLAGS) clean) (cd lwlib; $(MAKE) $(MFLAGS) clean) (cd lib-src; $(MAKE) $(MFLAGS) clean) -(cd man && $(MAKE) $(MFLAGS) clean) (cd leim; $(MAKE) $(MFLAGS) clean) ### `distclean' ### Delete all files from the current directory that are created by ### configuring or building the program. If you have unpacked the ### source and built the program without creating any other files, ### `make distclean' should leave only the files that were in the ### distribution. top_distclean=\ rm -f config.status config.cache config.log ; \ rm -f Makefile ${SUBDIR_MAKEFILES} ; \ if [ -d lock ] ; then (cd lock && (rm -f * || true)); else true; fi distclean: FRC (cd src; $(MAKE) $(MFLAGS) distclean) (cd oldXMenu; $(MAKE) $(MFLAGS) distclean) (cd lwlib; $(MAKE) $(MFLAGS) distclean) (cd lib-src; $(MAKE) $(MFLAGS) distclean) (cd man && $(MAKE) $(MFLAGS) distclean) (cd leim; $(MAKE) $(MFLAGS) distclean) (cd lisp; $(MAKE) $(MFLAGS) distclean) ${top_distclean} ### `maintainer-clean' ### Delete everything from the current directory that can be ### reconstructed with this Makefile. This typically includes ### everything deleted by distclean, plus more: C source files ### produced by Bison, tags tables, info files, and so on. ### ### One exception, however: `make maintainer-clean' should not delete ### `configure' even if `configure' can be remade using a rule in the ### Makefile. More generally, `make maintainer-clean' should not delete ### anything that needs to exist in order to run `configure' and then ### begin to build the program. maintainer-clean: FRC (cd src; $(MAKE) $(MFLAGS) maintainer-clean) (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean) (cd lwlib; $(MAKE) $(MFLAGS) maintainer-clean) (cd lib-src; $(MAKE) $(MFLAGS) maintainer-clean) -(cd man && $(MAKE) $(MFLAGS) maintainer-clean) (cd leim; $(MAKE) $(MFLAGS) maintainer-clean) ${top_distclean} ### This doesn't actually appear in the coding standards, but Karl ### says GCC supports it, and that's where the configuration part of ### the coding standards seem to come from. It's like distclean, but ### it deletes backup and autosave files too. extraclean: for i in ${SUBDIR} leim; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done ${top_distclean} -rm -f config-tmp-* -rm -f *~ \#* ### Unlocking and relocking. The idea of these productions is to reduce ### hassles when installing an incremental tar of Emacs. Do `make unlock' ### before unlocking the file to take the write locks off all sources so ### that tar xvof will overwrite them without fuss. Then do `make relock' ### afterward so that VC mode will know which files should be checked in ### if you want to mung them. ### ### Note: it's no disaster if these productions miss a file or two; tar ### and VC will swiftly let you know if this happens, and it is easily ### corrected. SOURCES = ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in \ README configure make-dist move-if-change .PHONY: unlock relock unlock: chmod u+w $(SOURCES) -(cd elisp; chmod u+w Makefile README *.texi) (cd etc; $(MAKE) $(MFLAGS) unlock) (cd lib-src; $(MAKE) $(MFLAGS) unlock) (cd lisp; $(MAKE) $(MFLAGS) unlock) (cd lisp/term; chmod u+w README *.el) (cd man; chmod u+w *texi* ChangeLog split-man) (cd oldXMenu; chmod u+w *.[ch] Makefile README) (cd lwlib; chmod u+w *.[ch] Makefile README) (cd src; $(MAKE) $(MFLAGS) unlock) relock: chmod u-w $(SOURCES) -(cd elisp; chmod u-w Makefile README *.texi) (cd etc; $(MAKE) $(MFLAGS) relock) (cd lib-src; $(MAKE) $(MFLAGS) relock) (cd lisp; $(MAKE) $(MFLAGS) relock) (cd lisp/term; chmod u+w README *.el) (cd man; chmod u+w *texi* ChangeLog split-man) (cd oldXMenu; chmod u+w *.[ch] Makefile README) (cd lwlib; chmod u+w *.[ch] Makefile README) (cd src; $(MAKE) $(MFLAGS) relock) # The src subdir knows how to do the right thing # even when the build directory and source dir are different. TAGS tags: lib-src src cd src; $(MAKE) tags check: @echo "We don't have any tests for GNU Emacs yet." dist: cd ${srcdir}; ./make-dist .PHONY: info dvi dist check html force-info: # Note that man/Makefile knows how to # put the info files in $(srcdir), # so we can do ok running make in the build dir. info: force-info (cd man; $(MAKE) $(MFLAGS) info) dvi: (cd man; $(MAKE) $(MFLAGS) dvi) #### Bootstrapping. ### This is meant for Emacs maintainers only. It first cleans the ### lisp subdirectory, removing all compiled Lisp files. Then a ### special emacs executable is built from Lisp sources, which is then ### used to compile Lisp files. The last step is a "normal" make. .PHONY: bootstrap bootstrap-lisp-1 boostrap-src bootstrap-lisp bootstrap-clean bootstrap: clean bootstrap-lisp-1 bootstrap-src bootstrap-lisp bootstrap-clean all info bootstrap-lisp-1: (cd lisp; $(MAKE) $(MFLAGS) bootstrap-clean) bootstrap-lisp: -(cd lisp; $(MAKE) $(MFLAGS) bootstrap EMACS=../src/bootstrap-emacs) bootstrap-src: (cd src; $(MAKE) $(MFLAGS) bootstrap) bootstrap-clean: (cd src; $(MAKE) $(MFLAGS) clean)