view src/s/gnu-linux.h @ 27732:2d4d3740cb78

*** empty log message ***

/* This file is the configuration file for Linux-based GNU systems
   Copyright (C) 1985, 86, 92, 94, 96, 1999 Free Software Foundation, Inc.

This file is part of GNU Emacs.

GNU Emacs is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.

GNU Emacs is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with GNU Emacs; see the file COPYING.  If not, write to
the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA.  */

/* This file was put together by Michael K. Johnson and Rik Faith.  */


/*
 *	Define symbols to identify the version of Unix this is.
 *	Define all the symbols that apply correctly.
 */

/* #define UNIPLUS */
/* #define USG5 */
#define USG
/* #define BSD_SYSTEM */
#define LINUX

/* SYSTEM_TYPE should indicate the kind of system you are using.
 It sets the Lisp variable system-type.  */

#define SYSTEM_TYPE "gnu/linux"		/* All the best software is free. */

/* Check the version number of Linux--if it is at least 1.2.0,
   it is safe to use SIGIO.  */
#ifndef NOT_C_CODE
#ifdef emacs
#ifdef HAVE_LINUX_VERSION_H
#include <linux/version.h>

#if LINUX_VERSION_CODE > 0x10200
#define LINUX_SIGIO_DOES_WORK
#endif /* LINUX_VERSION_CODE > 0x10200 */
#if LINUX_VERSION_CODE >= 0x20000
#define LINUX_MAP_SHARED_DOES_WORK
#endif /* LINUX_VERSION_CODE >= 0x20000 */
#endif /* HAVE_LINUX_VERSION_H */
#endif /* emacs */
#endif /* NOT_C_CODE */

/* Letter to use in finding device name of first pty,
  if system supports pty's.  'p' means it is /dev/ptyp0  */

#define FIRST_PTY_LETTER 'p'

#ifdef HAVE_DEV_PTMX

/* This is the same definition as in usg5-4.h, but with sigblock/sigunblock
   rather than sighold/sigrelse, which appear to be BSD4.1 specific and won't
   work if POSIX_SIGNALS is defined.  It may also be appropriate for SVR4.x
   (x<2) but I'm not sure.   [e-mail] */
/* This sets the name of the slave side of the PTY.  On SysVr4,
   grantpt(3) forks a subprocess, so keep sigchld_handler() from
   intercepting that death.  If any child but grantpt's should die
   within, it should be caught after sigrelse(2). */

#undef FIRST_PTY_LETTER
#define FIRST_PTY_LETTER 'z'

/* This sets the name of the master side of the PTY. */
#define PTY_NAME_SPRINTF strcpy (pty_name, "/dev/ptmx");

#undef PTY_TTY_NAME_SPRINTF
/* This used to use SIGCLD, but that doesn't appear in glibc 2.1.  */
#define PTY_TTY_NAME_SPRINTF			\
  {						\
    char *ptsname (), *ptyname;			\
						\
    sigblock (sigmask (SIGCHLD));		\
    if (grantpt (fd) == -1)			\
      { close (fd); return -1; }		\
    sigunblock (sigmask (SIGCHLD));		\
    if (unlockpt (fd) == -1)			\
      { close (fd); return -1; }		\
    if (!(ptyname = ptsname (fd)))		\
      { close (fd); return -1; }		\
    strncpy (pty_name, ptyname, sizeof (pty_name)); \
    pty_name[sizeof (pty_name) - 1] = 0;	\
  }

#endif /* HAVE_DEV_PTMX */

/*
 *	Define HAVE_TERMIOS if the system provides POSIX-style
 *	functions and macros for terminal control.
 */

#define HAVE_TERMIOS

/*
 *	Define HAVE_PTYS if the system supports pty devices.
 */

#define HAVE_PTYS

/* Uncomment this later when other problems are dealt with -mkj */

#define HAVE_SOCKETS

/* Define this symbol if your system has the functions bcopy, etc. */

#define BSTRING

/* subprocesses should be defined if you want to
   have code for asynchronous subprocesses
   (as used in M-x compile and M-x shell).
   This is generally OS dependent, and not supported
   under most USG systems. */

#define subprocesses

/* define MAIL_USE_FLOCK if the mailer uses flock
   to interlock access to /usr/spool/mail/$USER.
   The alternative is that a lock file named
   /usr/spool/mail/$USER.lock.  */

/* On GNU/Linux systems, both methods are used by various mail
   programs.  I assume that most people are using newer mailers that
   have heard of flock.  Change this if you need to. */

#define MAIL_USE_FLOCK

/* Define CLASH_DETECTION if you want lock files to be written
   so that Emacs can tell instantly when you try to modify
   a file that someone else has modified in his Emacs.  */

#define CLASH_DETECTION

/* Here, on a separate page, add any special hacks needed
   to make Emacs work on this system.  For example,
   you might define certain system call names that don't
   exist on your system, or that do different things on
   your system and must be used only through an encapsulation
   (Which you should place, by convention, in sysdep.c).  */

/* If you mount the proc file system somewhere other than /proc
   you will have to uncomment the following and make the proper
   changes */

/* #define LINUX_LDAV_FILE "/proc/loadavg" */

/* This is needed for dispnew.c:update_frame */

#ifdef emacs
#include <stdio.h>  /* Get the definition of _IO_STDIO_H.  */
#if defined(_IO_STDIO_H) || defined(_STDIO_USES_IOSTREAM)
/* new C libio names */
#define GNU_LIBRARY_PENDING_OUTPUT_COUNT(FILE) \
  ((FILE)->_IO_write_ptr - (FILE)->_IO_write_base)
#else /* !_IO_STDIO_H */
/* old C++ iostream names */
#define GNU_LIBRARY_PENDING_OUTPUT_COUNT(FILE) \
  ((FILE)->_pptr - (FILE)->_pbase)
#endif /* !_IO_STDIO_H */
#endif /* emacs */

/* Ask GCC where to find libgcc.a.  */
#define LIB_GCC `$(CC) $(C_SWITCH_X_SITE) -print-libgcc-file-name`

#ifndef __ELF__
/* GNU/Linux usually has crt0.o in a non-standard place */
#define START_FILES pre-crt0.o /usr/lib/crt0.o
#else
#define START_FILES pre-crt0.o /usr/lib/crt1.o /usr/lib/crti.o
#endif

#ifdef __ELF__
/* Here is how to find X Windows.  LD_SWITCH_X_SITE_AUX gives an -R option
   says where to find X windows at run time.  */

#ifdef __mips__
#define LD_SWITCH_SYSTEM -G 0 LD_SWITCH_X_SITE_AUX
#else
#define LD_SWITCH_SYSTEM LD_SWITCH_X_SITE_AUX
#endif /* __mips__ */
#endif /* __ELF__ */

/* As of version 1.1.51, Linux did not actually implement SIGIO.
   But it works in newer versions.  */
#ifdef emacs
#ifdef LINUX_SIGIO_DOES_WORK
#define INTERRUPT_INPUT
#else
#define BROKEN_SIGIO
/* Some versions of Linux define SIGURG and SIGPOLL as aliases for SIGIO.
   This prevents lossage in process.c.  */
#define BROKEN_SIGURG
#define BROKEN_SIGPOLL
#endif
#endif

/* This is needed for sysdep.c */

#define NO_SIOCTL_H           /* don't have sioctl.h */

#define HAVE_GETWD            /* cure conflict with getcwd? */
#define HAVE_WAIT_HEADER

#define SYSV_SYSTEM_DIR       /* use dirent.h */

#define POSIX                 /* affects getpagesize.h and systty.h */
#define POSIX_SIGNALS

/* Best not to include -lg, unless it is last on the command line */
#define LIBS_DEBUG
#ifndef __ELF__
#define LIB_STANDARD -lc /* avoid -lPW */
#else
#undef LIB_GCC
#define LIB_GCC
#define LIB_STANDARD -lgcc -lc -lgcc /usr/lib/crtn.o
#endif

/* Don't use -g in test compiles in configure.
   This is so we will use the same shared libs for that linking
   that are used when linking temacs.  */
#ifdef THIS_IS_CONFIGURE
#define C_DEBUG_SWITCH
#endif

/* Let's try this out, just in case.
   Nah.  Rik Faith <[e-mail]> says it doesn't work well.  */
/* #define SIGNALS_VIA_CHARACTERS */

/* Rob Malouf <[e-mail]> says:
   SYSV IPC is standard a standard part of Linux since version 0.99pl10,
   and is a very common addition to previous versions.  */

#ifdef TERM
#define LIBS_SYSTEM -lclient
#define C_SWITCH_SYSTEM -D_BSD_SOURCE -I/usr/src/term
#else
/* [e-mail] says that -lipc is not a separate library,
   since libc-4.4.1.  So -lipc was deleted.  */
#define LIBS_SYSTEM
#define C_SWITCH_SYSTEM -D_BSD_SOURCE
#endif

/* Paul Abrahams <[e-mail]> says this is needed.  */
#define LIB_MOTIF -lXm -lXpm

#ifdef HAVE_LIBNCURSES
#define TERMINFO
#define LIBS_TERMCAP -lncurses
#endif

#define HAVE_SYSVIPC

#ifdef __ELF__
#define UNEXEC unexelf.o
#ifndef LINUX_MAP_SHARED_DOES_WORK
#define UNEXEC_USE_MAP_PRIVATE
#endif
#endif

#ifdef LINUX_QMAGIC

#define HAVE_TEXT_START
#define UNEXEC unexsunos4.o
#define N_PAGSIZ(x) PAGE_SIZE

#else /* not LINUX_QMAGIC */

#define A_TEXT_OFFSET(hdr) (N_MAGIC(hdr) == QMAGIC ? sizeof (struct exec) : 0)
#define A_TEXT_SEEK(hdr) (N_TXTOFF(hdr) + A_TEXT_OFFSET(hdr))
#define ADJUST_EXEC_HEADER \
  unexec_text_start = N_TXTADDR(ohdr) + A_TEXT_OFFSET(ohdr)

#endif /* not LINUX_QMAGIC */

#if 0
/* In 19.23 and 19.24, configure sometimes fails to define these.
   It has to do with the fact that configure uses CFLAGS when linking
   while Makefile.in.in (erroneously) fails to do so when linking temacs.  */
#ifndef HAVE_GETTIMEOFDAY
#define HAVE_GETTIMEOFDAY
#endif
#ifndef HAVE_MKDIR
#define HAVE_MKDIR
#endif
#ifndef HAVE_RMDIR
#define HAVE_RMDIR
#endif
#ifndef HAVE_XSCREENNUMBEROFSCREEN
#define HAVE_XSCREENNUMBEROFSCREEN
#endif
#endif /* 0 */

/* This is to work around mysterious gcc failures in some system versions.
   It is unlikely that Emacs changes will work around this problem;
   therefore, this should remain permanently.  */
#ifndef HAVE_XRMSETDATABASE
#define HAVE_XRMSETDATABASE
#endif

/* The regex.o routines are a part of the GNU C-library used with Linux.  */
/* However, sometimes they disagree with the src/regex.h that comes with Emacs,
   and that can make trouble in etags.c because it gets the regex.h from Emacs
   and the function definitions in libc.  So turn this off.  */
/* #define REGEXP_IN_LIBC */

/* Use BSD process groups, but use setpgid() instead of setpgrp() to
   actually set a process group. */

#define BSD_PGRPS
#define setpgrp(pid,pgid) setpgid(pid,pgid)

#define NARROWPROTO 1

/* Use mmap directly for allocating larger buffers.  */
#ifdef DOUG_LEA_MALLOC
#undef REL_ALLOC
#endif