Mercurial > emacs
view install-sh @ 82990:2ecd1f669db9
Fixed X support, preliminary support for X-tty combo sessions.
lib-src/emacsclient.c (copy_from_to, pty_conversation): Re-added SIGIO
hack. (Sigh.)
lisp/frame.el (make-frame-on-tty): Use make-terminal-frame, not
make-frame.
src/dispnew.c (line_hash_code, line_draw_cost): Updated to use
the new display_method parameters.
(Fredraw_frame): fflush the tty only if f is a termcap frame.
(direct_output_for_insert): Updated to use the new display_method
parameters. fflush the tty only if f is a termcap frame.
(direct_output_forward_char, update_frame_1, scrolling): Ditto.
(update_frame_line, Fding, bitch_at_user): Ditto.
(Fsend_string_to_terminal): Fail if current frame is not on a tty.
(init_display): Frame size change is safe here.
src/frame.c (Vterminal_frame): Restored previously deleted variable.
(syms_of_frame): Initialize it.
(make_terminal_frame): Copy the frame's display_method from tty_display_info.
(Fmake_terminal_frame): Enable simultaneous X and tty frames (buggy).
(Fredirect_frame_focus): Don't call frame_rehighlight_hook if frame
is on a termcap device.
src/frame.h (struct frame): Renamed display to display_method.
(Vterminal_frame): Re-added declaration.
src/keyboard.c (flow_control): Moved to struct tty_display_info.
(read_avail_input): Check ttys even if there is a read_socket_hook.
(Fset_input_mode): Call reset_sys_modes/init_sys_modes and set
flow_control or meta_key only when the frame is a termcap frame.
(Fcurrent_input_mode): Handle flow_control and meta_key right on
non-termcap frames.
src/scroll.c (calculate_scrolling, calculate_direct_scrolling): Update
to use the new display_method parameters.
(scrolling_1, scroll_cost): Ditto.
src/sysdep.c (init_sys_modes, reset_sys_modes): Always set the
terminal parameters if tty_out->input is not stdin. Updated to the
new location of flow_control.
(hft_init): Moved HFT init code to term_init, as it needs the frame.
src/term.c (tty_display_method_template): New variable.
(update_begin): Added rif hack.
(set_terminal_window, ins_del_lines, term_init): Updated to use the
new display_method parameters.
(insert_glyphs, ins_del_lines): Only call insert_glyphs_hook if the
current frame is not on a tty.
(calculate_costs): Don't calculate costs if not on a tty.
(term_dummy_init): Fixed tty->output initialization. Preallocate Wcm
and display_method.
(term_init): Allocate & initialize display_method. Blindly fixed
WINDOWSNT-specific parts. Added HFT-specific initialization
exception from hft_init.
(delete_tty): Only delete termcap frames. Free() the display_method.
src/termchar.h (struct tty_display_info): Moved high-level terminal
characteristics to struct display_method. Added flow_control and
display_method members.
src/termhooks.h (struct display_method): New struct (renamed from
struct device). Added accessor macros.
src/window.c (init_window_once): Initialize Vterminal_frame.
src/xdisp.c (init_iterator, expose_frame): Added rif hack.
(try_window_id): Updated to use the new display_method parameters.
src/xfaces.c (realize_basic_faces): Don't call
x_update_menu_appearance if the frame is a tty frame.
src/xfns.c (Fx_create_frame): Added rif hack. Initialize
display_method.
(x_create_tip_frame): Initialize display_method.
src/xterm.c (x_display_method): New variable.
(x_flush, x_frame_of_widget, XTmouse_position): Ignore non-X frames.
(x_window_to_scroll_bar, x_window_to_menu_bar): Ditto.
(xim_destroy_callback, xim_instantiate_callback): Ditto.
(frame_highlight, frame_unhighlight): Added rif hack.
(x_initialize): Don't initialize rif. Do initialize x_display_method.
src/xterm.h (x_display_method): New declaration.
git-archimport-id: lorentey@elte.hu--2004/emacs--multi-tty--0--patch-30
author | Karoly Lorentey <lorentey@elte.hu> |
---|---|
date | Fri, 02 Jan 2004 01:15:26 +0000 |
parents | 23a1cea22d13 |
children |
line wrap: on
line source
#! /bin/sh # # install - install a program, script, or datafile # This comes from X11R5 (mit/util/scripts/install.sh). # # Copyright 1991 by the Massachusetts Institute of Technology # # Permission to use, copy, modify, distribute, and sell this software and its # documentation for any purpose is hereby granted without fee, provided that # the above copyright notice appear in all copies and that both that # copyright notice and this permission notice appear in supporting # documentation, and that the name of M.I.T. not be used in advertising or # publicity pertaining to distribution of the software without specific, # written prior permission. M.I.T. makes no representations about the # suitability of this software for any purpose. It is provided "as is" # without express or implied warranty. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. It can only install one file at a time, a restriction # shared with many OS's install programs. # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit="${DOITPROG-}" # put in absolute paths if you don't have them in your path; or use env. vars. mvprog="${MVPROG-mv}" cpprog="${CPPROG-cp}" chmodprog="${CHMODPROG-chmod}" chownprog="${CHOWNPROG-chown}" chgrpprog="${CHGRPPROG-chgrp}" stripprog="${STRIPPROG-strip}" rmprog="${RMPROG-rm}" mkdirprog="${MKDIRPROG-mkdir}" transformbasename="" transform_arg="" instcmd="$mvprog" chmodcmd="$chmodprog 0755" chowncmd="" chgrpcmd="" stripcmd="" rmcmd="$rmprog -f" mvcmd="$mvprog" src="" dst="" dir_arg="" while [ x"$1" != x ]; do case $1 in -c) instcmd="$cpprog" shift continue;; -d) dir_arg=true shift continue;; -m) chmodcmd="$chmodprog $2" shift shift continue;; -o) chowncmd="$chownprog $2" shift shift continue;; -g) chgrpcmd="$chgrpprog $2" shift shift continue;; -s) stripcmd="$stripprog" shift continue;; -t=*) transformarg=`echo $1 | sed 's/-t=//'` shift continue;; -b=*) transformbasename=`echo $1 | sed 's/-b=//'` shift continue;; *) if [ x"$src" = x ] then src=$1 else # this colon is to work around a 386BSD /bin/sh bug : dst=$1 fi shift continue;; esac done if [ x"$src" = x ] then echo "install: no input file specified" exit 1 else true fi if [ x"$dir_arg" != x ]; then dst=$src src="" if [ -d $dst ]; then instcmd=: else instcmd=mkdir fi else # Waiting for this to be detected by the "$instcmd $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if [ -f $src -o -d $src ] then true else echo "install: $src does not exist" exit 1 fi if [ x"$dst" = x ] then echo "install: no destination specified" exit 1 else true fi # If destination is a directory, append the input filename; if your system # does not like double slashes in filenames, you may need to add some logic if [ -d $dst ] then dst="$dst"/`basename $src` else true fi fi ## this sed command emulates the dirname command dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` # Make sure that the destination directory exists. # this part is taken from Noah Friedman's mkinstalldirs script # Skip lots of stat calls in the usual case. if [ ! -d "$dstdir" ]; then defaultIFS=' ' IFS="${IFS-${defaultIFS}}" oIFS="${IFS}" # Some sh's can't handle IFS=/ for some reason. IFS='%' set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` IFS="${oIFS}" pathcomp='' while [ $# -ne 0 ] ; do pathcomp="${pathcomp}${1}" shift if [ ! -d "${pathcomp}" ] ; then $mkdirprog "${pathcomp}" else true fi pathcomp="${pathcomp}/" done fi if [ x"$dir_arg" != x ] then $doit $instcmd $dst && if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi else # If we're going to rename the final executable, determine the name now. if [ x"$transformarg" = x ] then dstfile=`basename $dst` else dstfile=`basename $dst $transformbasename | sed $transformarg`$transformbasename fi # don't allow the sed command to completely eliminate the filename if [ x"$dstfile" = x ] then dstfile=`basename $dst` else true fi # Make a temp file name in the proper directory. dsttmp=$dstdir/#inst.$$# # Move or copy the file name to the temp name $doit $instcmd $src $dsttmp && trap "rm -f ${dsttmp}" 0 && # and set any options; do chmod last to preserve setuid bits # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $instcmd $src $dsttmp" command. if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && # Now rename the file to the real destination. $doit $rmcmd -f $dstdir/$dstfile && $doit $mvcmd $dsttmp $dstdir/$dstfile fi && exit 0