Mercurial > emacs
view Makefile.in @ 107111:310e92236716
Close bug#5529.
* buffers.texi (Uniquify): Must explicitly load library. (Bug#5529)
author | Glenn Morris <rgm@gnu.org> |
---|---|
date | Sun, 07 Feb 2010 23:20:58 -0800 |
parents | 1d1d5d9bd884 |
children | bc371c4be819 376148b31b5e |
line wrap: on
line source
# DIST: This is the distribution Makefile for Emacs. configure can # DIST: make most of the changes to this file you might want, so try # DIST: that first. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, # 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 # Free Software Foundation, Inc. # This file is part of GNU Emacs. # GNU Emacs is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # GNU Emacs is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>. ### Commentary: # make all to compile and build Emacs. # make install to install it. # make TAGS to update tags tables. # # make clean or make mostlyclean # Delete all files from the current directory that are normally # created by building the program. Don't delete the files that # record the configuration. Also preserve files that could be made # by building, but normally aren't because the distribution comes # with them. # # Delete `.dvi' files here if they are not part of the distribution. # # make distclean # Delete all files from the current directory that are created by # configuring or building the program. If you have unpacked the # source and built the program without creating any other files, # `make distclean' should leave only the files that were in the # distribution. # # make maintainer-clean # Delete everything from the current directory that can be # reconstructed with this Makefile. This typically includes # everything deleted by distclean, plus more: .elc files, # C source files produced by Bison, tags tables, info files, # and so on. # # make extraclean # Still more severe - delete backup and autosave files, too. # # make bootstrap # Removes all the compiled files to force a new bootstrap from a # clean slate, and then build in the normal way. SHELL = /bin/sh # This may not work with certain non-GNU make's. It only matters when # inheriting a CDPATH not starting with the current directory. CDPATH= # If Make doesn't predefine MAKE, set it here. @SET_MAKE@ # ==================== Things `configure' Might Edit ==================== CC=@CC@ CPP=@CPP@ C_SWITCH_SYSTEM=@c_switch_system@ ALLOCA=@ALLOCA@ LN_S=@LN_S@ CFLAGS=@CFLAGS@ LDFLAGS=@LDFLAGS@ CPPFLAGS=@CPPFLAGS@ C_SWITCH_X_SITE=@C_SWITCH_X_SITE@ LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@ EXEEXT=@EXEEXT@ MAKEINFO=@MAKEINFO@ ### These help us choose version- and architecture-specific directories ### to install files in. ### This should be the number of the Emacs version we're building, ### like `18.59' or `19.0'. version=@version@ ### This should be the name of the configuration we're building Emacs ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'. configuration=@configuration@ # ==================== Where To Install Things ==================== # The default location for installation. Everything is placed in # subdirectories of this directory. The default values for many of # the variables below are expressed in terms of this one, so you may # not need to change them. This defaults to /usr/local. prefix=@prefix@ # Like `prefix', but used for architecture-specific files. exec_prefix=@exec_prefix@ # Where to install Emacs and other binaries that people will want to # run directly (like etags). bindir=@bindir@ # The root of the directory tree for read-only architecture-independent # data files. ${datadir}, ${infodir} and ${mandir} are based on this. datarootdir=@datarootdir@ # Where to install architecture-independent data files. ${lispdir} # and ${etcdir} are subdirectories of this. datadir=@datadir@ # Where to install and expect the files that Emacs modifies as it # runs. These files are all architecture-independent. # Right now, this is not used. sharedstatedir=@sharedstatedir@ # Where to install and expect executable files to be run by Emacs # rather than directly by users, and other architecture-dependent # data. ${archlibdir} is a subdirectory of this. libexecdir=@libexecdir@ # Where to install Emacs's man pages. # This used to allow choice of the numeric extension, but this made # little sense since the files were always installed in man1/ # (and they contain cross-references that expect them to be there). mandir=@mandir@ man1dir=$(mandir)/man1 MAN_PAGES=b2m.1 ctags.1 ebrowse.1 emacs.1 emacsclient.1 etags.1 \ grep-changelog.1 rcs-checkin.1 # Where to install and expect the info files describing Emacs. In the # past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but # since there are now many packages documented with the texinfo # system, it is inappropriate to imply that it is part of Emacs. infodir=@infodir@ INFO_FILES=ada-mode auth autotype calc ccmode cl dbus dired-x ebrowse \ ede ediff edt eieio efaq eintr elisp emacs emacs-mime epa erc \ eshell eudc flymake forms gnus idlwave info mairix-el \ message mh-e newsticker nxml-mode org pcl-cvs pgg rcirc \ reftex remember sasl sc semantic ses sieve smtpmail speedbar \ tramp url vip viper widget woman # Directory for local state files for all programs. localstatedir=@localstatedir@ # Where to look for bitmap files. bitmapdir=@bitmapdir@ # Where to find the source code. The source code for Emacs's C kernel is # expected to be in ${srcdir}/src, and the source code for Emacs's # utility programs is expected to be in ${srcdir}/lib-src. This is # set by the configure script's `--srcdir' option. # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH. srcdir=@srcdir@ # Where the manpage source files are kept. mansrcdir=$(srcdir)/doc/man # Tell make where to find source files; this is needed for the makefiles. VPATH=@srcdir@ # Where to find the application default. x_default_search_path=@x_default_search_path@ # Location to install Emacs.app under NeXT/Open/GNUstep / Cocoa ns_appdir=@ns_appdir@ ns_appbindir=@ns_appbindir@ ns_appresdir=@ns_appresdir@ # Where the etc/emacs.desktop file is to be installed. desktopdir=$(datarootdir)/applications # Where the etc/images/icons/hicolor directory is to be installed. icondir=$(datarootdir)/icons # The source directory for the icon files. iconsrcdir=$(srcdir)/etc/images/icons # ==================== Emacs-specific directories ==================== # These variables hold the values Emacs will actually use. They are # based on the values of the standard Make variables above. # Where to install the lisp files distributed with # Emacs. This includes the Emacs version, so that the # lisp files for different versions of Emacs will install # themselves in separate directories. lispdir=@lispdir@ # Directories Emacs should search for lisp files specific # to this site (i.e. customizations), before consulting # ${lispdir}. This should be a colon-separated list of # directories. locallisppath=@locallisppath@ # Where Emacs will search to find its lisp files. Before # changing this, check to see if your purpose wouldn't # better be served by changing locallisppath. This # should be a colon-separated list of directories. lisppath=@lisppath@ # Where Emacs will search for its lisp files while # building. This is only used during the process of # compiling Emacs, to help Emacs find its lisp files # before they've been installed in their final location. # It's usually identical to lisppath, except that # it does not include locallisppath, and the # entry for the directory containing the installed lisp # files has been replaced with ../lisp. This should be a # colon-separated list of directories. buildlisppath=${srcdir}/lisp # Where to install the other architecture-independent # data files distributed with Emacs (like the tutorial, # the cookie recipes and the Zippy database). This path # usually contains the Emacs version number, so the data # files for multiple versions of Emacs may be installed # at once. etcdir=@etcdir@ # Where to put executables to be run by Emacs rather than # the user. This path usually includes the Emacs version # and configuration name, so that multiple configurations # for multiple versions of Emacs may be installed at # once. archlibdir=@archlibdir@ # Where to put the docstring file. docdir=@docdir@ # Where to install Emacs game score files. gamedir=@gamedir@ # ==================== Utility Programs for the Build ==================== # Allow the user to specify the install program. INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_INFO = @INSTALL_INFO@ # By default, we uphold the dignity of our programs. INSTALL_STRIP = # We use gzip to compress installed .el files. GZIP_PROG = @GZIP_PROG@ # ============================= Targets ============================== # Program name transformation. TRANSFORM = @program_transform_name@ # What emacs should be called when installed. EMACS = `echo emacs${EXEEXT} | sed '$(TRANSFORM)'` EMACSFULL = `echo emacs-${version}${EXEEXT} | sed '$(TRANSFORM)'` # Subdirectories to make recursively. `lisp' is not included # because the compiled lisp files are part of the distribution. # leim is not included because it needs special handling. # # Actually, we now include `lisp' as well, since the compiled files # are not included any more in case of bootstrap or in case Emacs was # checked out from a VCS. SUBDIR = lib-src src lisp # The subdir makefiles created by config.status. SUBDIR_MAKEFILES = lib-src/Makefile doc/emacs/Makefile doc/misc/Makefile doc/lispref/Makefile doc/lispintro/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile leim/Makefile lisp/Makefile # Subdirectories to install, and where they'll go. # lib-src's makefile knows how to install it, so we don't do that here. # leim's makefile also knows how to install it, so we don't do that here. # When installing the info files, we need to do special things to # avoid nuking an existing dir file, so we don't do that here; # instead, we have written out explicit code in the `install' targets. COPYDIR = ${srcdir}/etc ${srcdir}/lisp COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir} all: ${SUBDIR} leim removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g' # Generate epaths.h from epaths.in. This target is invoked by `configure'. epaths-force: FRC @(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \ buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \ x_default_search_path=`echo ${x_default_search_path}`; \ gamedir=`echo ${gamedir}`; \ sed < ${srcdir}/src/epaths.in > epaths.h.$$$$ \ -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${lisppath}"'";' \ -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \ -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \ -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \ -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \ -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \ -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \ -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \ -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \ -e 's;/[*] *arch-tag:.*;/*;') && \ ${srcdir}/move-if-change epaths.h.$$$$ src/epaths.h # For parallel make, src should be built before leim. # "export PARALLEL=0" is for SGI's Make, to prevent it from # running more than 1 process in the leim directory, especially for # the $TIT files there. leim: src Makefile FRC (export PARALLEL; PARALLEL=0; cd $@; $(MAKE) all $(MFLAGS) \ CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \ LDFLAGS='${LDFLAGS}' MAKE='${MAKE}') src: lib-src FRC .RECURSIVE: ${SUBDIR} leim # We need to build `emacs' in `src' to compile the *.elc files in `lisp'. lisp: src # These targets should be "${SUBDIR} without `src'". lib-src lisp: Makefile FRC cd $@; $(MAKE) all $(MFLAGS) \ CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \ LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' # Pass to src/Makefile.in an additional BOOTSTRAPEMACS variable which # is either set to bootstrap-emacs (in case bootstrap-emacs has not been # constructed yet) or the empty string (otherwise). # src/Makefile.in uses it to implement conditional dependencies, so that # files that need bootstrap-emacs to be built do not additionally need # to be kept fresher than bootstrap-emacs. Otherwise changing a single # file src/foo.c forces dumping a new bootstrap-emacs, then re-byte-compiling # all preloaded elisp files, and only then dump the actual src/emacs, which # is not wrong, but is overkill in 99.99% of the cases. src: Makefile FRC boot=bootstrap-emacs$(EXEEXT); \ if [ ! -x "src/$$boot" ]; then \ cd $@; $(MAKE) all $(MFLAGS) \ CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \ LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="$$boot"; \ fi; cd $@; $(MAKE) all $(MFLAGS) \ CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \ LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="" blessmail: Makefile src FRC cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \ MAKE='${MAKE}' archlibdir='$(archlibdir)' # We used to have one rule per */Makefile.in, but that leads to race # conditions with parallel makes, so let's assume that the time stamp on # ./Makefile is representative of the time stamp on all the other Makefiles. Makefile: config.status $(srcdir)/src/config.in \ $(srcdir)/Makefile.in \ $(srcdir)/src/Makefile.in \ $(srcdir)/lib-src/Makefile.in \ $(srcdir)/doc/emacs/Makefile.in \ $(srcdir)/doc/misc/Makefile.in \ $(srcdir)/doc/lispref/Makefile.in \ $(srcdir)/doc/lispintro/Makefile.in \ $(srcdir)/oldXMenu/Makefile.in \ $(srcdir)/lwlib/Makefile.in \ $(srcdir)/leim/Makefile.in \ $(srcdir)/lisp/Makefile.in ./config.status config.status: ${srcdir}/configure ${srcdir}/lisp/version.el ./config.status --recheck AUTOCONF_INPUTS = @MAINT@ $(srcdir)/configure.in $(srcdir)/m4/getopt.m4 $(srcdir)/configure: $(AUTOCONF_INPUTS) cd ${srcdir} && autoconf $(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in @true $(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS) cd ${srcdir} && autoheader rm -f $(srcdir)/src/stamp-h.in echo timestamp > $(srcdir)/src/stamp-h.in # ==================== Installation ==================== ## If we let lib-src do its own installation, that means we ## don't have to duplicate the list of utilities to install in ## this Makefile as well. ## On AIX, use tar xBf. ## On Xenix, use tar xpf. .PHONY: install mkdir ## We delete each directory in ${COPYDESTS} before we copy into it; ## that way, we can reinstall over directories that have been put in ## place with their files read-only (perhaps because they are checked ## into RCS). In order to make this safe, we make sure that the ## source exists and is distinct from the destination. ### We do install-arch-indep first because ### the executable needs the Lisp files and DOC file to work properly. install: all install-arch-indep install-arch-dep install-leim blessmail @true MV_DIRS = for i in $$dir; do rm -fr `basename "$$i"` ; mv "$$i" . ; done ### Install the executables that were compiled specifically for this machine. ### It would be nice to do something for a parallel make ### to ensure that install-arch-indep finishes before this starts. install-arch-dep: mkdir (cd lib-src; \ $(MAKE) install $(MFLAGS) prefix=${prefix} \ exec_prefix=${exec_prefix} bindir=${bindir} \ libexecdir=${libexecdir} archlibdir=${archlibdir} \ INSTALL_STRIP=${INSTALL_STRIP}) ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL) -chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL) rm -f $(DESTDIR)${bindir}/$(EMACS) -ln $(DESTDIR)${bindir}/$(EMACSFULL) $(DESTDIR)${bindir}/$(EMACS) -unset CDPATH; \ for f in `cd lib-src && echo fns-*.el`; do \ if test -r lib-src/$$f ; then \ ${INSTALL_DATA} lib-src/$$f $(DESTDIR)${archlibdir}/$$f; \ else true; fi ; \ done if test "${ns_appdir}" != ""; then \ ( cd ${ns_appresdir} ; \ if test -d share/emacs ; then dir=share/emacs/*/*; $(MV_DIRS); fi;\ if test -d share/info ; then dir=share/info; $(MV_DIRS) ; fi ; \ rm -fr share ) ; \ ( cd ${ns_appbindir}/libexec ; dir=emacs/*/*/* ; $(MV_DIRS); \ rm -fr emacs ) ; \ ( cd ${ns_appbindir}/bin ; rm -f emacs emacs-23* ; \ ln -sf ../libexec/* .) ; \ else true ; fi ## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html ## Needs to be the user running install, so configure can't set it. set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \ `id -un 2> /dev/null`; do \ [ -n "$${installuser}" ] && break ; \ done ### Install the files that are machine-independent. ### Most of them come straight from the distribution; ### the exception is the DOC-* files, which are copied ### from the build directory. ## Note that we copy DOC* and then delete DOC ## as a workaround for a bug in tar on Ultrix 4.2. ## We install only the relevant DOC file if possible ## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*. ## If people complain about the h flag in tar command, take that out. ## That flag is also used in leim/Makefile.in ## Note that the Makefiles in the etc directory are potentially useful ## in an installed Emacs, so should not be excluded. install-arch-indep: mkdir info install-etc -set ${COPYDESTS} ; \ unset CDPATH; \ for dir in ${COPYDIR} ; do \ if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \ rm -rf $$1 ; \ fi ; \ shift ; \ done -set ${COPYDESTS} ; \ mkdir ${COPYDESTS} ; \ chmod ugo+rx ${COPYDESTS} ; \ unset CDPATH; \ $(set_installuser); \ for dir in ${COPYDIR} ; do \ dest=$$1 ; shift ; \ [ -d $${dir} ] \ && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \ && (echo "Copying $${dir} to $${dest}..." ; \ (cd $${dir}; tar -chf - . ) \ | (cd $${dest}; umask 022; \ tar -xvf - && cat > /dev/null) || exit 1; \ find $${dest} -exec chown $${installuser} {} ';' ;\ for subdir in `find $${dest} -type d ! -name RCS ! -name CVS -print` ; do \ chmod a+rx $${subdir} ; \ rm -rf $${subdir}/RCS ; \ rm -rf $${subdir}/CVS ; \ rm -f $${subdir}/.cvsignore ; \ rm -f $${subdir}/.gitignore ; \ rm -f $${subdir}/.arch-inventory ; \ rm -f $${subdir}/.DS_Store ; \ rm -f $${subdir}/\#* ; \ rm -f $${subdir}/.\#* ; \ rm -f $${subdir}/*~ ; \ rm -f $${subdir}/*.orig ; \ [ "$${dir}" != "${srcdir}/etc" ] && \ rm -f $${subdir}/[mM]akefile*.c $${subdir}/[mM]akefile*[.-]in \ $${subdir}/[mM]akefile ; \ rm -f $${subdir}/ChangeLog* ; \ rm -f $${subdir}/dired.todo ; \ done) ; \ done -rm -f $(DESTDIR)${lispdir}/subdirs.el $(srcdir)/update-subdirs $(DESTDIR)${lispdir} if [ -f $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \ then true; \ else \ (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \ echo " (normal-top-level-add-subdirs-to-load-path))") \ > $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el; \ fi chmod a+r $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el -if [ -f $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el ]; \ then true; \ else \ (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \ echo " (normal-top-level-add-subdirs-to-load-path))") \ > $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el; \ fi -chmod a+r $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el -unset CDPATH; \ if [ `(cd ./etc; /bin/pwd)` != `(cd $(DESTDIR)${docdir}; /bin/pwd)` ]; \ then \ fullversion=`./src/emacs --version | sed -n '1 s/GNU Emacs *//p'`; \ if [ -f "./etc/DOC-$${fullversion}" ]; \ then \ docfile="DOC-$${fullversion}"; \ else \ docfile="DOC"; \ fi; \ echo "Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \ (cd ./etc; tar -chf - $${docfile}) \ |(cd $(DESTDIR)${docdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \ (cd $(DESTDIR)$(docdir); \ $(set_installuser); \ chown $${installuser} DOC*; chmod a+r DOC*; \ if test "`echo DOC-*`" != "DOC-*"; then rm -f DOC; fi); \ else true; fi -unset CDPATH; \ if [ -r ./lisp ] \ && [ -r ./lisp/simple.el ] \ && [ x`(cd ./lisp; /bin/pwd)` != x`(cd $(DESTDIR)${lispdir}; /bin/pwd)` ] \ && [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ./lisp; /bin/pwd)` ]; \ then \ echo "Copying lisp/*.el and lisp/*.elc to $(DESTDIR)${lispdir} ..." ; \ (cd lisp; tar -chf - *.el *.elc) \ |(cd $(DESTDIR)${lispdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \ (cd $(DESTDIR)${lispdir}; \ $(set_installuser); \ find . -exec chown $${installuser} {} ';') ; \ else true; fi -unset CDPATH; \ if [ -n "${GZIP_PROG}" ]; \ then \ echo "Compressing *.el ..." ; \ (cd $(DESTDIR)${lispdir}; for f in `find . -name "*.elc" -print`; do \ ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \ done) \ else true; fi -unset CDPATH; \ thisdir=`/bin/pwd`; \ if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \ then \ (cd $(DESTDIR)${infodir}; \ if [ -f dir ]; then true; \ else \ (cd $${thisdir}; \ ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir; \ chmod a+r $(DESTDIR)${infodir}/dir); \ fi; \ cd ${srcdir}/info ; \ for elt in $(INFO_FILES); do \ test "$(MAKEINFO)" = "off" && ! test -e $$elt && continue; \ for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \ ${INSTALL_DATA} $$f $(DESTDIR)${infodir}/$$f; \ chmod a+r $(DESTDIR)${infodir}/$$f; \ done; \ done); \ else true; fi -unset CDPATH; \ thisdir=`/bin/pwd`; \ if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \ then \ for elt in $(INFO_FILES); do \ test "$(MAKEINFO)" = "off" && ! test -e $$elt && continue; \ (cd $${thisdir}; \ ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \ done; \ else true; fi -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS} thisdir=`/bin/pwd`; \ cd ${mansrcdir}; \ for page in ${MAN_PAGES}; do \ (cd $${thisdir}; \ ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${page}; \ chmod a+r $(DESTDIR)${man1dir}/$${page}); \ done ## Install those items from etc/ that need to end up elsewhere. install-etc: mkdir ${INSTALL_DATA} ${srcdir}/etc/emacs.desktop \ $(DESTDIR)${desktopdir}/emacs.desktop for icon in $(iconsrcdir)/*/*/apps/*.* \ $(iconsrcdir)/*/*/mimetypes/*.*; do \ if [ -r $${icon} ]; then \ iicon=`echo "$${icon}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},'` ; \ ${INSTALL_DATA} $${icon} $${iicon} ; \ fi ; \ done ### Install LEIM files. Although they are machine-independent, we ### have separate target here instead of including it in ### `install-arch-indep'. People who extracted LEIM files after they ### insalled Emacs itself can install only LEIM files by this target. install-leim: leim/Makefile mkdir cd leim; $(MAKE) install ### Build Emacs and install it, stripping binaries while installing them. install-strip: $(MAKE) INSTALL_STRIP=-s install ### Build all the directories we're going to install Emacs in. Since ### we may be creating several layers of directories (for example, ### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs ### instead of mkdir. Not all systems' mkdir programs have the `-p' flag. ### We set the umask so that any created directories are world-readable. ### FIXME it would be good to warn about non-standard permissions of ### pre-existing directories, but that does not seem easy. mkdir: FRC icondirs= ; \ for dir in $(iconsrcdir)/*/*/apps $(iconsrcdir)/*/*/mimetypes; do \ if [ -d $${dir} ]; then \ icondirs="$${icondirs} $${dir}" ; \ fi ; \ done ; \ icondirs=`echo "$${icondirs}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},g'` ; \ umask 022 ; \ $(srcdir)/mkinstalldirs $(DESTDIR)${datadir} ${COPYDESTS} \ $(DESTDIR)${infodir} $(DESTDIR)${man1dir} \ $(DESTDIR)${bindir} $(DESTDIR)${docdir} $(DESTDIR)${libexecdir} \ $(DESTDIR)${datadir}/emacs/site-lisp \ $(DESTDIR)${datadir}/emacs/${version}/site-lisp \ $(DESTDIR)`echo ${locallisppath} | sed 's,:, $(DESTDIR),g'` \ $(DESTDIR)${desktopdir} $${icondirs} ### Delete all the installed files that the `install' target would ### create (but not the noninstalled files such as `make all' would create). ### ### Don't delete the lisp and etc directories if they're in the source tree. uninstall: (cd lib-src; \ $(MAKE) $(MFLAGS) uninstall \ prefix=${prefix} exec_prefix=${exec_prefix} \ bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}) -unset CDPATH; \ for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do \ if [ -d $${dir} ]; then \ case `(cd $${dir} ; /bin/pwd)` in \ `(cd ${srcdir} ; /bin/pwd)`* ) ;; \ * ) rm -rf $${dir} ;; \ esac ; \ case $${dir} in \ $(DESTDIR)${datadir}/emacs/${version}/* ) \ rm -rf $(DESTDIR)${datadir}/emacs/${version} \ ;; \ esac ; \ fi ; \ done (cd $(DESTDIR)${archlibdir} && rm -f fns-*) -rm -rf $(DESTDIR)${libexecdir}/emacs/${version} (cd $(DESTDIR)${infodir} && \ for elt in $(INFO_FILES); do \ $(INSTALL_INFO) --remove --info-dir=. $$elt; \ for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \ rm -f $$f; \ done; \ done;) (cd $(DESTDIR)${man1dir} && rm -f $(MAN_PAGES)) (cd $(DESTDIR)${bindir} && rm -f $(EMACSFULL) $(EMACS)) (cd $(DESTDIR)${icondir} && rm -f hicolor/*x*/apps/emacs.png hicolor/*x*/apps/emacs22.png hicolor/scalable/apps/emacs.svg hicolor/scalable/mimetypes/emacs-document.svg ) -rm -f $(DESTDIR)${desktopdir}/emacs.desktop for file in snake-scores tetris-scores; do \ file=$(DESTDIR)${gamedir}/$${file}; \ [ -s $${file} ] || rm -f $$file; \ done FRC: # ==================== Cleaning up and miscellanea ==================== .PHONY: mostlyclean clean distclean maintainer-clean extraclean ### `mostlyclean' ### Like `clean', but may refrain from deleting a few files that people ### normally don't want to recompile. For example, the `mostlyclean' ### target for GCC does not delete `libgcc.a', because recompiling it ### is rarely necessary and takes a lot of time. mostlyclean: FRC (cd src; $(MAKE) $(MFLAGS) mostlyclean) (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean) (cd lwlib; $(MAKE) $(MFLAGS) mostlyclean) (cd lib-src; $(MAKE) $(MFLAGS) mostlyclean) -(cd doc/emacs && $(MAKE) $(MFLAGS) mostlyclean) -(cd doc/misc && $(MAKE) $(MFLAGS) mostlyclean) -(cd doc/lispref && $(MAKE) $(MFLAGS) mostlyclean) -(cd doc/lispintro && $(MAKE) $(MFLAGS) mostlyclean) (cd leim; $(MAKE) $(MFLAGS) mostlyclean) ### `clean' ### Delete all files from the current directory that are normally ### created by building the program. Don't delete the files that ### record the configuration. Also preserve files that could be made ### by building, but normally aren't because the distribution comes ### with them. ### ### Delete `.dvi' files here if they are not part of the distribution. clean: FRC (cd src; $(MAKE) $(MFLAGS) clean) (cd oldXMenu; $(MAKE) $(MFLAGS) clean) (cd lwlib; $(MAKE) $(MFLAGS) clean) (cd lib-src; $(MAKE) $(MFLAGS) clean) -(cd doc/emacs && $(MAKE) $(MFLAGS) clean) -(cd doc/misc && $(MAKE) $(MFLAGS) clean) -(cd doc/lispref && $(MAKE) $(MFLAGS) clean) -(cd doc/lispintro && $(MAKE) $(MFLAGS) clean) (cd leim; $(MAKE) $(MFLAGS) clean) ### `bootclean' ### Delete all files that need to be remade for a clean bootstrap. top_bootclean=\ rm -f config.cache config.log ### `distclean' ### Delete all files from the current directory that are created by ### configuring or building the program. If you have unpacked the ### source and built the program without creating any other files, ### `make distclean' should leave only the files that were in the ### distribution. top_distclean=\ ${top_bootclean}; \ rm -f config.status Makefile ${SUBDIR_MAKEFILES} distclean: FRC (cd src; $(MAKE) $(MFLAGS) distclean) (cd oldXMenu; $(MAKE) $(MFLAGS) distclean) (cd lwlib; $(MAKE) $(MFLAGS) distclean) (cd lib-src; $(MAKE) $(MFLAGS) distclean) (cd doc/emacs && $(MAKE) $(MFLAGS) distclean) (cd doc/misc && $(MAKE) $(MFLAGS) distclean) (cd doc/lispref && $(MAKE) $(MFLAGS) distclean) (cd doc/lispintro && $(MAKE) $(MFLAGS) distclean) (cd leim; $(MAKE) $(MFLAGS) distclean) (cd lisp; $(MAKE) $(MFLAGS) distclean) ${top_distclean} ### `bootstrap-clean' ### Delete everything that can be reconstructed by `make' and that ### needs to be deleted in order to force a bootstrap from a clean state. bootstrap-clean: FRC (cd src; $(MAKE) $(MFLAGS) bootstrap-clean) (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean) (cd lwlib; $(MAKE) $(MFLAGS) maintainer-clean) (cd lib-src; $(MAKE) $(MFLAGS) maintainer-clean) -(cd doc/emacs && $(MAKE) $(MFLAGS) maintainer-clean) -(cd doc/misc && $(MAKE) $(MFLAGS) maintainer-clean) -(cd doc/lispref && $(MAKE) $(MFLAGS) maintainer-clean) -(cd doc/lispintro && $(MAKE) $(MFLAGS) maintainer-clean) (cd leim; $(MAKE) $(MFLAGS) maintainer-clean) (cd lisp; $(MAKE) $(MFLAGS) bootstrap-clean) ${top_bootclean} ### `maintainer-clean' ### Delete everything from the current directory that can be ### reconstructed with this Makefile. This typically includes ### everything deleted by distclean, plus more: C source files ### produced by Bison, tags tables, info files, and so on. ### ### One exception, however: `make maintainer-clean' should not delete ### `configure' even if `configure' can be remade using a rule in the ### Makefile. More generally, `make maintainer-clean' should not delete ### anything that needs to exist in order to run `configure' and then ### begin to build the program. maintainer-clean: bootstrap-clean FRC (cd src; $(MAKE) $(MFLAGS) maintainer-clean) (cd lisp; $(MAKE) $(MFLAGS) maintainer-clean) ${top_distclean} ### This doesn't actually appear in the coding standards, but Karl ### says GCC supports it, and that's where the configuration part of ### the coding standards seem to come from. It's like distclean, but ### it deletes backup and autosave files too. extraclean: for i in ${SUBDIR} leim; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done ${top_distclean} -rm -f config-tmp-* -rm -f *~ \#* # The src subdir knows how to do the right thing # even when the build directory and source dir are different. TAGS tags: lib-src src cd src; $(MAKE) tags check: @echo "We don't have any tests for GNU Emacs yet." dist: cd ${srcdir}; ./make-dist .PHONY: info dvi dist check html info-real: (cd doc/emacs; $(MAKE) $(MFLAGS) info) (cd doc/misc; $(MAKE) $(MFLAGS) info) (cd doc/lispref; $(MAKE) $(MFLAGS) info) (cd doc/lispintro; $(MAKE) $(MFLAGS) info) force-info: # Note that man/Makefile knows how to put the info files in $(srcdir), # so we can do ok running make in the build dir. # This used to have a clause that exited with an error if MAKEINFO = no. # But it is inappropriate to do so without checking if makeinfo is # actually needed - it is not if the info files are up-to-date. (Bug#3982) # Only the doc/*/Makefiles can decide that, so we let those rules run # and give a standard error if makeinfo is needed but missing. # While it would be nice to give a more detailed error message, that # would require changing every rule in doc/ that builds an info file, # and it's not worth it. This case is only relevant if you download a # release, then change the .texi files. info: force-info @if test "$(MAKEINFO)" = "off"; then \ echo "Configured --without-makeinfo, not building manuals" ; \ else \ $(MAKE) $(MFLAGS) info-real ; \ fi # The info/dir file must be updated by hand when new manuals are added. check-info-dir: info cd info ; \ missing= ; \ for file in *; do \ test -f "$${file}" || continue ; \ case $${file} in \ *-[0-9]*|COPYING|dir) continue ;; \ esac ; \ grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \ done ; \ if test -n "$${missing}"; then \ echo "Missing info/dir entries: $${missing}" ; \ exit 1 ; \ fi ; \ echo "info/dir is OK" dvi: (cd doc/emacs; $(MAKE) $(MFLAGS) dvi) (cd doc/misc; $(MAKE) $(MFLAGS) dvi) (cd doc/lispref; $(MAKE) $(MFLAGS) elisp.dvi) (cd doc/lispintro; $(MAKE) $(MFLAGS) emacs-lisp-intro.dvi) #### Bootstrapping. ### This first cleans the lisp subdirectory, removing all compiled ### Lisp files. Then re-run make to build all the files anew. .PHONY: bootstrap bootstrap: bootstrap-clean FRC if [ -x ./config.status ]; then \ ./config.status; \ else \ ./configure --enable-maintainer-mode; \ fi $(MAKE) $(MFLAGS) info all .PHONY: check-declare check-declare: @if [ ! -e $(srcdir)/src/emacs ]; then \ echo "You must build Emacs to use this command"; \ exit 1; \ fi (cd leim; $(MAKE) $(MFLAGS) $@) (cd lisp; $(MAKE) $(MFLAGS) $@)