Mercurial > emacs
view configure.in @ 42837:324b7e2693b6
*** empty log message ***
author | Pavel Janík <Pavel@Janik.cz> |
---|---|
date | Sat, 19 Jan 2002 14:04:08 +0000 |
parents | ae2e226d9001 |
children | 5fcba75d6dd8 |
line wrap: on
line source
dnl Autoconf script for GNU Emacs dnl To rebuild the `configure' script from this, execute the command dnl autoconf dnl in the directory containing this script. dnl dnl Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001 dnl Free Software Foundation, Inc. dnl dnl This file is part of GNU Emacs. dnl dnl GNU Emacs is free software; you can redistribute it and/or modify dnl it under the terms of the GNU General Public License as published by dnl the Free Software Foundation; either version 2, or (at your option) dnl any later version. dnl dnl GNU Emacs is distributed in the hope that it will be useful, dnl but WITHOUT ANY WARRANTY; without even the implied warranty of dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the dnl GNU General Public License for more details. dnl dnl You should have received a copy of the GNU General Public License dnl along with GNU Emacs; see the file COPYING. If not, write to the dnl Free Software Foundation, Inc., 59 Temple Place - Suite 330, dnl Boston, MA 02111-1307, USA. AC_PREREQ(2.51)dnl AC_INIT(src/lisp.h) AC_CONFIG_HEADER(src/config.h:src/config.in) dnl Support for --program-prefix, --program-suffix and dnl --program-transform-name options AC_ARG_PROGRAM lispdir='${datadir}/emacs/${version}/lisp' locallisppath='${datadir}/emacs/${version}/site-lisp:'\ '${datadir}/emacs/site-lisp:${datadir}/emacs/${version}/leim' lisppath='${locallisppath}:${lispdir}' etcdir='${datadir}/emacs/${version}/etc' archlibdir='${libexecdir}/emacs/${version}/${configuration}' docdir='${datadir}/emacs/${version}/etc' AC_ARG_WITH(gcc, [ --without-gcc don't use GCC to compile Emacs if GCC is found]) AC_ARG_WITH(pop, [ --without-pop don't support POP mail retrieval with movemail], [if test "$withval" = yes; then AC_DEFINE(MAIL_USE_POP) else : fi], AC_DEFINE(MAIL_USE_POP)) AC_ARG_WITH(kerberos, [ --with-kerberos support Kerberos-authenticated POP], [AC_DEFINE(KERBEROS)]) AC_ARG_WITH(kerberos5, [ --with-kerberos5 support Kerberos version 5 authenticated POP], [if test "${with_kerberos5+set}" = set; then if test "${with_kerberos+set}" != set; then with_kerberos=yes AC_DEFINE(KERBEROS) fi fi AC_DEFINE(KERBEROS5)]) AC_ARG_WITH(hesiod, [ --with-hesiod support Hesiod to get the POP server host], [AC_DEFINE(HESIOD)]) dnl This should be the last --with option, because --with-x is dnl added later on when we find the path of X, and it's best to dnl keep them together visually. AC_ARG_WITH(x-toolkit, [ --with-x-toolkit=KIT use an X toolkit (KIT = yes/lucid/athena/motif/no)], [ case "${withval}" in y | ye | yes ) val=athena ;; n | no ) val=no ;; l | lu | luc | luci | lucid ) val=lucid ;; a | at | ath | athe | athen | athena ) val=athena ;; m | mo | mot | moti | motif ) val=motif ;; dnl These don't currently work. dnl o | op | ope | open | open- | open-l | open-lo \ dnl | open-loo | open-look ) val=open-look ;; * ) dnl AC_MSG_ERROR([the \`--with-x-toolkit' option is supposed to have a value dnl which is \`yes', \`no', \`lucid', \`athena', \`motif' or \`open-look'.]) AC_MSG_ERROR([\`--with-x-toolkit=$withval' is invalid\; this option's value should be \`yes', \`no', \`lucid', \`athena', or \`motif'. Currently, \`yes', \`athena' and \`lucid' are synonyms.]) ;; esac with_x_toolkit=$val ]) AC_ARG_WITH(xpm, [ --with-xpm use -lXpm for displaying XPM images]) AC_ARG_WITH(jpeg, [ --with-jpeg use -ljpeg for displaying JPEG images]) AC_ARG_WITH(tiff, [ --with-tiff use -ltiff for displaying TIFF images]) AC_ARG_WITH(gif, [ --with-gif use -lungif for displaying GIF images]) AC_ARG_WITH(png, [ --with-png use -lpng for displaying PNG images]) AC_ARG_WITH(toolkit-scroll-bars, [ --without-toolkit-scroll-bars don't use Motif or Xaw3d scroll bars]) AC_ARG_WITH(xim, [ --without-xim don't use X11 XIM]) #### Make srcdir absolute, if it isn't already. It's important to #### avoid running the path through pwd unnecessarily, since pwd can #### give you automounter prefixes, which can go away. We do all this #### so Emacs can find its files when run uninstalled. ## Make sure CDPATH doesn't affect cd (in case PWD is relative). unset CDPATH case "${srcdir}" in /* ) ;; . ) ## We may be able to use the $PWD environment variable to make this ## absolute. But sometimes PWD is inaccurate. if test ".${PWD}" != "." && test ".`(cd ${PWD} ; sh -c pwd)`" = ".${PWD}" ; then srcdir="$PWD" else srcdir="`(cd ${srcdir}; pwd)`" fi ;; * ) srcdir="`(cd ${srcdir}; pwd)`" ;; esac #### Check if the source directory already has a configured system in it. if test `pwd` != `(cd ${srcdir} && pwd)` \ && test -f "${srcdir}/src/config.h" ; then AC_MSG_WARN([The directory tree \`${srcdir}' is being used as a build directory right now; it has been configured in its own right. To configure in another directory as well, you MUST use GNU make. If you do not have GNU make, then you must now do \`make distclean' in ${srcdir}, and then run $0 again.]) changequote(, )dnl extrasub='/^VPATH[ ]*=/c\ changequote([, ])dnl vpath %.c $(srcdir)\ vpath %.h $(srcdir)\ vpath %.y $(srcdir)\ vpath %.l $(srcdir)\ vpath %.s $(srcdir)\ vpath %.in $(srcdir)\ vpath %.texi $(srcdir)' fi #### Given the configuration name, set machfile and opsysfile to the #### names of the m/*.h and s/*.h files we should use. ### Canonicalize the configuration name. AC_CANONICAL_HOST canonical=$host configuration=${host_alias-$host} changequote(, )dnl ### If you add support for a new configuration, add code to this ### switch statement to recognize your configuration name and select ### the appropriate operating system and machine description files. ### You would hope that you could choose an m/*.h file pretty much ### based on the machine portion of the configuration name, and an s- ### file based on the operating system portion. However, it turns out ### that each m/*.h file is pretty manufacturer-specific - for ### example, apollo.h, hp9000s300.h, mega68k, news.h, and tad68k are ### all 68000 machines; mips.h, pmax.h, and news-risc are all MIPS ### machines. So we basically have to have a special case for each ### configuration name. ### ### As far as handling version numbers on operating systems is ### concerned, make sure things will fail in a fixable way. If ### /etc/MACHINES doesn't say anything about version numbers, be ### prepared to handle anything reasonably. If version numbers ### matter, be sure /etc/MACHINES says something about it. ### ### Eric Raymond says we should accept strings like "sysvr4" to mean ### "System V Release 4"; he writes, "The old convention encouraged ### confusion between `system' and `release' levels'." machine='' opsys='' unported=no case "${canonical}" in ## FreeBSD ports *-*-freebsd* ) opsys=freebsd case "${canonical}" in alpha*-*-freebsd*) machine=alpha ;; i[3456]86-*-freebsd*) machine=intel386 ;; esac ;; ## NetBSD ports *-*-netbsd* ) opsys=netbsd case "${canonical}" in alpha*-*-netbsd*) machine=alpha ;; i[3456]86-*-netbsd*) machine=intel386 ;; m68k-*-netbsd*) # This is somewhat bogus. machine=hp9000s300 ;; powerpc-apple-netbsd*) machine=macppc ;; mips-*-netbsd*) machine=pmax ;; mipsel-*-netbsd*) machine=pmax ;; ns32k-*-netbsd*) machine=ns32000 ;; powerpc-*-netbsd*) machine=macppc ;; sparc*-*-netbsd*) machine=sparc ;; vax-*-netbsd*) machine=vax ;; arm-*-netbsd*) machine=arm ;; esac ;; ## OpenBSD ports *-*-openbsd* ) opsys=openbsd case "${canonical}" in alpha*-*-openbsd*) machine=alpha ;; i386-*-openbsd*) machine=intel386 ;; m68k-*-openbsd*) machine=hp9000s300 ;; mipsel-*-openbsd*) machine=pmax ;; ns32k-*-openbsd*) machine=ns32000 ;; sparc-*-openbsd*) machine=sparc ;; vax-*-openbsd*) machine=vax ;; esac ;; ## Acorn RISCiX: arm-acorn-riscix1.1* ) machine=acorn opsys=riscix1-1 ;; arm-acorn-riscix1.2* | arm-acorn-riscix ) ## This name is riscix12 instead of riscix1.2 ## to avoid a file name conflict on MSDOS. machine=acorn opsys=riscix12 ;; ## BSDI ports *-*-bsdi* ) opsys=bsdi case "${canonical}" in i[345]86-*-bsdi*) machine=intel386 ;; sparc-*-bsdi*) machine=sparc ;; powerpc-*-bsdi*) machine=macppc ;; esac case "${canonical}" in *-*-bsd386* | *-*-bsdi1* ) opsys=bsd386 ;; *-*-bsdi2.0* ) opsys=bsdos2 ;; *-*-bsdi2* ) opsys=bsdos2-1 ;; *-*-bsdi3* ) opsys=bsdos3 ;; *-*-bsdi4* ) opsys=bsdos4 ;; esac ;; ## Alliant machines ## Strictly speaking, we need the version of the alliant operating ## system to choose the right machine file, but currently the ## configuration name doesn't tell us enough to choose the right ## one; we need to give alliants their own operating system name to ## do this right. When someone cares, they can help us. fx80-alliant-* ) machine=alliant4 opsys=bsd4-2 ;; i860-alliant-* ) machine=alliant-2800 opsys=bsd4-3 ;; ## Alpha (DEC) machines. alpha*-dec-osf* ) machine=alpha opsys=osf1 # This is needed to find X11R6.1 libraries for certain tests. NON_GCC_LINK_TEST_OPTIONS=-Wl,-rpath,/usr/X11R6/lib GCC_LINK_TEST_OPTIONS=-Wl,-rpath,/usr/X11R6/lib # NON_GNU_CPP is necessary on 5.0 to avoid mangling src/Makefile # due to non-traditional preprocessing with the current compiler # defaults. OSF 4 can also have that compiler version, and there # seems always to have been a usable /usr/bin/cpp. NON_GNU_CPP=/usr/bin/cpp case "${canonical}" in alpha*-dec-osf[5-9]*) opsys=osf5-0 ;; esac ;; alpha*-*-linux-gnu* ) machine=alpha opsys=gnu-linux ;; arm*-*-linux-gnu* ) machine=arm opsys=gnu-linux ;; ppc-*-linux | \ powerpc-*-linux* ) machine=macppc opsys=gnu-linux ;; ## Altos 3068 m68*-altos-sysv* ) machine=altos opsys=usg5-2 ;; ## Amdahl UTS 580-amdahl-sysv* ) machine=amdahl opsys=usg5-2-2 ;; ## Apollo, Domain/OS m68*-apollo-* ) machine=apollo opsys=bsd4-3 ;; ## AT&T 3b2, 3b5, 3b15, 3b20 we32k-att-sysv* ) machine=att3b opsys=usg5-2-2 ;; ## AT&T 3b1 - The Mighty Unix PC! m68*-att-sysv* ) machine=7300 opsys=usg5-2-2 ;; ## Bull dpx20 rs6000-bull-bosx* ) machine=ibmrs6000 opsys=aix3-2 ;; ## Bull dpx2 m68*-bull-sysv3* ) machine=dpx2 opsys=usg5-3 ;; ## Bull sps7 m68*-bull-sysv2* ) machine=sps7 opsys=usg5-2 ;; ## CCI 5/32, 6/32 -- see "Tahoe". ## Celerity ## I don't know what configuration name to use for this; config.sub ## doesn't seem to know anything about it. Hey, Celerity users, get ## in touch with us! celerity-celerity-bsd* ) machine=celerity opsys=bsd4-2 ;; ## Clipper ## What operating systems does this chip run that Emacs has been ## tested on? clipper-* ) machine=clipper ## We'll use the catch-all code at the bottom to guess the ## operating system. ;; ## Convex *-convex-bsd* | *-convex-convexos* ) machine=convex opsys=bsd4-3 ## Prevents spurious white space in makefiles - d.m.cooke@larc.nasa.gov NON_GNU_CPP="cc -E -P" ;; ## Cubix QBx/386 i[3456]86-cubix-sysv* ) machine=intel386 opsys=usg5-3 ;; ## Cydra 5 cydra*-cydrome-sysv* ) machine=cydra5 opsys=usg5-3 ;; ## Data General AViiON Machines ## DG changed naming conventions with the release of 5.4.4.10, they ## dropped the initial 5.4 but left the intervening R. Because of the ## R this shouldn't conflict with older versions of the OS (which I ## think were named like dgux4.*). In addition, DG new AViiONs series ## uses either Motorola M88k or Intel Pentium CPUs. m88k-dg-dguxR4.* | m88k-dg-dgux4* ) machine=aviion opsys=dgux4 ;; m88k-dg-dgux5.4R3* | m88k-dg-dgux5.4.3* ) ## This name is dgux5-4-3 instead of dgux5-4r3 ## to avoid a file name conflict on MSDOS. machine=aviion opsys=dgux5-4-3 ;; m88k-dg-dgux5.4R2* | m88k-dg-dgux5.4.2* ) machine=aviion opsys=dgux5-4r2 ;; m88k-dg-dgux* ) machine=aviion opsys=dgux ;; ## Data General AViiON Intel (x86) Machines ## Exists from 5.4.3 (current i586-dg-dguxR4.11) ## Ehud Karni, 1998-may-30, ehud@unix.simonwiesel.co.il i[345]86-dg-dguxR4* ) machine=aviion-intel opsys=dgux4 ;; ## DECstations mips-dec-ultrix[0-3].* | mips-dec-ultrix4.0* | mips-dec-bsd4.2* ) machine=pmax opsys=bsd4-2 ;; mips-dec-ultrix4.[12]* | mips-dec-bsd* ) machine=pmax opsys=bsd4-3 ;; mips-dec-ultrix* ) machine=pmax opsys=ultrix4-3 ;; mips-dec-osf* ) machine=pmax opsys=osf1 ;; mips-dec-mach_bsd4.3* ) machine=pmax opsys=mach-bsd4-3 ;; ## Motorola Delta machines m68k-motorola-sysv* | m68000-motorola-sysv* ) machine=delta opsys=usg5-3 if test -z "`type gnucc | grep 'not found'`" then if test -s /etc/167config then CC="gnucc -m68040" else CC="gnucc -m68881" fi else if test -z "`type gcc | grep 'not found'`" then CC=gcc else CC=cc fi fi ;; m88k-motorola-sysv4* ) # jbotte@bnr.ca says that UNIX_System_V <hostName> 4.0 R40V4.3 m88k mc88110 # needs POSIX_SIGNALS and therefore needs usg5-4-2. # I hope there are not other 4.0 versions for this machine # which really need usg5-4 instead. machine=delta88k opsys=usg5-4-2 ;; m88k-motorola-sysv* | m88k-motorola-m88kbcs* ) machine=delta88k opsys=usg5-3 ;; ## Dual machines m68*-dual-sysv* ) machine=dual opsys=usg5-2 ;; m68*-dual-uniplus* ) machine=dual opsys=unipl5-2 ;; ## Elxsi 6400 elxsi-elxsi-sysv* ) machine=elxsi opsys=usg5-2 ;; ## Encore machines ns16k-encore-bsd* ) machine=ns16000 opsys=umax ;; ## The GEC 63 - apparently, this port isn't really finished yet. # I'm sure we finished off the last of the machines, though. -- fx ## Gould Power Node and NP1 pn-gould-bsd4.2* ) machine=gould opsys=bsd4-2 ;; pn-gould-bsd4.3* ) machine=gould opsys=bsd4-3 ;; np1-gould-bsd* ) machine=gould-np1 opsys=bsd4-3 ;; ## Harris Night Hawk machines running CX/UX (a 5000 looks just like a 4000 ## as far as Emacs is concerned). m88k-harris-cxux* ) # Build needs to be different on 7.0 and later releases case "`uname -r`" in [56].[0-9] ) machine=nh4000 opsys=cxux ;; [7].[0-9] ) machine=nh4000 opsys=cxux7 ;; esac NON_GNU_CPP="/lib/cpp" ;; ## Harris ecx or gcx running CX/UX (Series 1200, Series 3000) m68k-harris-cxux* ) machine=nh3000 opsys=cxux ;; ## Harris power pc NightHawk running Power UNIX (Series 6000) powerpc-harris-powerunix ) machine=nh6000 opsys=powerunix NON_GNU_CPP="cc -Xo -E -P" ;; ## SR2001/SR2201 running HI-UX/MPP hppa1.1-hitachi-hiuxmpp* ) machine=sr2k opsys=hiuxmpp ;; hppa1.1-hitachi-hiuxwe2* ) machine=sr2k opsys=hiuxwe2 ;; ## Honeywell XPS100 xps*-honeywell-sysv* ) machine=xps100 opsys=usg5-2 ;; ## HP 9000 series 200 or 300 m68*-hp-bsd* ) machine=hp9000s300 opsys=bsd4-3 ;; ## HP/UX 7, 8, 9, and 10 are supported on these machines. m68*-hp-hpux* ) case "`uname -r`" in ## Someone's system reports A.B8.05 for this. ## I wonder what other possibilities there are. *.B8.* ) machine=hp9000s300 opsys=hpux8 ;; *.08.* ) machine=hp9000s300 opsys=hpux8 ;; *.09.* ) machine=hp9000s300 opsys=hpux9 ;; *.1[0-9].* ) machine=hp9000s300 opsys=hpux9shr ;; *) machine=hp9000s300 opsys=hpux ;; esac ;; ## HP 9000 series 700 and 800, running HP/UX hppa*-hp-hpux7* ) machine=hp800 opsys=hpux ;; hppa*-hp-hpux8* ) machine=hp800 opsys=hpux8 ;; hppa*-hp-hpux9shr* ) machine=hp800 opsys=hpux9shr ;; hppa*-hp-hpux9* ) machine=hp800 opsys=hpux9 ;; hppa*-hp-hpux10* ) machine=hp800 opsys=hpux10 ;; hppa*-hp-hpux1[1-9]* ) machine=hp800 opsys=hpux11 ;; hppa*-*-linux-gnu* ) machine=hp800 opsys=gnu-linux ;; ## HP 9000 series 700 and 800, running HP/UX hppa*-hp-hpux* ) ## Cross-compilation? Nah! case "`uname -r`" in ## Someone's system reports A.B8.05 for this. ## I wonder what other possibilities there are. *.B8.* ) machine=hp800 opsys=hpux8 ;; *.08.* ) machine=hp800 opsys=hpux8 ;; *.09.* ) machine=hp800 opsys=hpux9 ;; *) machine=hp800 opsys=hpux10 ;; esac ;; hppa*-*-nextstep* ) machine=hp800 opsys=nextstep ;; ## Orion machines orion-orion-bsd* ) machine=orion opsys=bsd4-2 ;; clipper-orion-bsd* ) machine=orion105 opsys=bsd4-2 ;; ## IBM machines i[3456]86-ibm-aix1.1* ) machine=ibmps2-aix opsys=usg5-2-2 ;; i[3456]86-ibm-aix1.[23]* | i[3456]86-ibm-aix* ) machine=ibmps2-aix opsys=usg5-3 ;; i370-ibm-aix*) machine=ibm370aix opsys=usg5-3 ;; s390-*-linux-gnu) machine=ibms390 opsys=gnu-linux ;; rs6000-ibm-aix3.1* | powerpc-ibm-aix3.1* ) machine=ibmrs6000 opsys=aix3-1 ;; rs6000-ibm-aix3.2.5 | powerpc-ibm-aix3.2.5 ) machine=ibmrs6000 opsys=aix3-2-5 ;; rs6000-ibm-aix4.1* | powerpc-ibm-aix4.1* ) machine=ibmrs6000 opsys=aix4-1 ;; rs6000-ibm-aix4.2* | powerpc-ibm-aix4.2* ) machine=ibmrs6000 opsys=aix4-2 ;; rs6000-ibm-aix4.0* | powerpc-ibm-aix4.0* ) machine=ibmrs6000 opsys=aix4 ;; rs6000-ibm-aix4* | powerpc-ibm-aix4* ) machine=ibmrs6000 opsys=aix4-1 ;; rs6000-ibm-aix* | powerpc-ibm-aix* ) machine=ibmrs6000 opsys=aix3-2 ;; romp-ibm-bsd4.3* ) machine=ibmrt opsys=bsd4-3 ;; romp-ibm-bsd4.2* ) machine=ibmrt opsys=bsd4-2 ;; romp-ibm-aos4.3* ) machine=ibmrt opsys=bsd4-3 ;; romp-ibm-aos4.2* ) machine=ibmrt opsys=bsd4-2 ;; romp-ibm-aos* ) machine=ibmrt opsys=bsd4-3 ;; romp-ibm-bsd* ) machine=ibmrt opsys=bsd4-3 ;; romp-ibm-aix* ) machine=ibmrt-aix opsys=usg5-2-2 ;; ## Integrated Solutions `Optimum V' m68*-isi-bsd4.2* ) machine=isi-ov opsys=bsd4-2 ;; m68*-isi-bsd4.3* ) machine=isi-ov opsys=bsd4-3 ;; ## Intel 386 machines where we do care about the manufacturer i[3456]86-intsys-sysv* ) machine=is386 opsys=usg5-2-2 ;; ## Prime EXL i[3456]86-prime-sysv* ) machine=i386 opsys=usg5-3 ;; ## Sequent Symmetry running Dynix i[3456]86-sequent-bsd* ) machine=symmetry opsys=bsd4-3 ;; ## Sequent Symmetry running ptx 4, which is a modified SVR4. i[3456]86-sequent-ptx4* | i[3456]86-sequent-sysv4* ) machine=sequent-ptx opsys=ptx4 NON_GNU_CPP=/lib/cpp ;; ## Sequent Symmetry running DYNIX/ptx ## Use the old cpp rather than the newer ANSI one. i[3456]86-sequent-ptx* ) machine=sequent-ptx opsys=ptx NON_GNU_CPP="/lib/cpp" ;; ## ncr machine running svr4.3. i[3456]86-ncr-sysv4.3 ) machine=ncr386 opsys=usg5-4-3 ;; ## Unspecified sysv on an ncr machine defaults to svr4.2. ## (Plain usg5-4 doesn't turn on POSIX signals, which we need.) i[3456]86-ncr-sysv* ) machine=ncr386 opsys=usg5-4-2 ;; ## Intel Paragon OSF/1 i860-intel-osf1* ) machine=paragon opsys=osf1 NON_GNU_CPP=/usr/mach/lib/cpp ;; ## Intel 860 i860-*-sysv4* ) machine=i860 opsys=usg5-4 NON_GNU_CC="/bin/cc" # Ie, not the one in /usr/ucb/cc. NON_GNU_CPP="/usr/ccs/lib/cpp" # cc -E tokenizes macro expansion. ;; ## Macintosh PowerPC powerpc*-*-linux-gnu* ) machine=macppc opsys=gnu-linux ;; ## Masscomp machines m68*-masscomp-rtu* ) machine=masscomp opsys=rtu ;; ## Megatest machines m68*-megatest-bsd* ) machine=mega68 opsys=bsd4-2 ;; ## Workstations sold by MIPS ## This is not necessarily all workstations using the MIPS processor - ## Irises are produced by SGI, and DECstations by DEC. ## etc/MACHINES lists mips.h and mips4.h as possible machine files, ## and usg5-2-2 and bsd4-3 as possible OS files. The only guidance ## it gives for choosing between the alternatives seems to be "Use ## -machine=mips4 for RISCOS version 4; use -opsystem=bsd4-3 with ## the BSD world." I'll assume that these are instructions for ## handling two odd situations, and that every other situation ## should use mips.h and usg5-2-2, they being listed first. mips-mips-usg* ) machine=mips4 ## Fall through to the general code at the bottom to decide on the OS. ;; mips-mips-riscos4* ) machine=mips4 opsys=bsd4-3 NON_GNU_CC="cc -systype bsd43" NON_GNU_CPP="cc -systype bsd43 -E" ;; mips-mips-riscos5* ) machine=mips4 opsys=riscos5 NON_GNU_CC="cc -systype bsd43" NON_GNU_CPP="cc -systype bsd43 -E" ;; mips-mips-bsd* ) machine=mips opsys=bsd4-3 ;; mips-mips-* ) machine=mips opsys=usg5-2-2 ;; ## NeXT m68*-next-* | m68k-*-nextstep* ) machine=m68k opsys=nextstep ;; ## The complete machine from National Semiconductor ns32k-ns-genix* ) machine=ns32000 opsys=usg5-2 ;; ## NCR machines m68*-ncr-sysv2* | m68*-ncr-sysvr2* ) machine=tower32 opsys=usg5-2-2 ;; m68*-ncr-sysv3* | m68*-ncr-sysvr3* ) machine=tower32v3 opsys=usg5-3 ;; ## NEC EWS4800 mips-nec-sysv4*) machine=ews4800 opsys=ux4800 ;; ## Nixdorf Targon 31 m68*-nixdorf-sysv* ) machine=targon31 opsys=usg5-2-2 ;; ## Nu (TI or LMI) m68*-nu-sysv* ) machine=nu opsys=usg5-2 ;; ## Plexus m68*-plexus-sysv* ) machine=plexus opsys=usg5-2 ;; ## PowerPC reference platform powerpcle-*-solaris2* ) machine=prep opsys=sol2-5 ;; ## Pyramid machines ## I don't really have any idea what sort of processor the Pyramid has, ## so I'm assuming it is its own architecture. pyramid-pyramid-bsd* ) machine=pyramid opsys=bsd4-2 ;; ## Sequent Balance ns32k-sequent-bsd4.2* ) machine=sequent opsys=bsd4-2 ;; ns32k-sequent-bsd4.3* ) machine=sequent opsys=bsd4-3 ;; ## Siemens Nixdorf mips-siemens-sysv* | mips-sni-sysv*) machine=mips-siemens opsys=usg5-4 NON_GNU_CC=/usr/ccs/bin/cc NON_GNU_CPP=/usr/ccs/lib/cpp ;; ## Silicon Graphics machines ## Iris 2500 and Iris 2500 Turbo (aka the Iris 3030) m68*-sgi-iris3.5* ) machine=irist opsys=iris3-5 ;; m68*-sgi-iris3.6* | m68*-sgi-iris*) machine=irist opsys=iris3-6 ;; ## Iris 4D mips-sgi-irix3* ) machine=iris4d opsys=irix3-3 ;; mips-sgi-irix4* ) machine=iris4d opsys=irix4-0 ;; mips-sgi-irix6.5 ) machine=iris4d opsys=irix6-5 # Without defining _LANGUAGE_C, things get masked out in the headers # so that, for instance, grepping for `free' in stdlib.h fails and # AC_HEADER_STD_C fails. (MIPSPro 7.2.1.2m compilers, Irix 6.5.3m). NON_GNU_CPP="/lib/cpp -D_LANGUAGE_C" NON_GCC_TEST_OPTIONS="-D_LANGUAGE_C" ;; mips-sgi-irix6* ) machine=iris4d opsys=irix6-0 # It's not clear whether -D_LANGUAGE_C is necessary as it is for 6.5, # but presumably it does no harm. NON_GNU_CPP="/lib/cpp -D_LANGUAGE_C" # -32 probably isn't necessary in later v.6s -- anyone know which? NON_GCC_TEST_OPTIONS=-32 ;; mips-sgi-irix5.[01]* ) machine=iris4d opsys=irix5-0 ;; mips-sgi-irix5* | mips-sgi-irix* ) machine=iris4d opsys=irix5-2 ;; ## SONY machines m68*-sony-bsd4.2* ) machine=news opsys=bsd4-2 ;; m68*-sony-bsd4.3* ) machine=news opsys=bsd4-3 ;; m68*-sony-newsos3* | m68*-sony-news3*) machine=news opsys=bsd4-3 ;; mips-sony-bsd* | mips-sony-newsos4* | mips-sony-news4*) machine=news-risc opsys=bsd4-3 ;; mips-sony-newsos6* ) machine=news-r6 opsys=newsos6 ;; mips-sony-news* ) machine=news-risc opsys=newsos5 ;; ## Stride m68*-stride-sysv* ) machine=stride opsys=usg5-2 ;; ## Suns sparc-*-linux-gnu* | sparc64-*-linux-gnu* ) machine=sparc opsys=gnu-linux ;; *-auspex-sunos* | *-sun-sunos* | *-sun-bsd* | *-sun-solaris* \ | i[3456]86-*-solaris2* | i[3456]86-*-sunos5* | powerpc*-*-solaris2* \ | rs6000-*-solaris2*) case "${canonical}" in m68*-sunos1* ) machine=sun1 ;; m68*-sunos2* ) machine=sun2 ;; m68* ) machine=sun3 ;; i[3456]86-sun-sunos[34]* ) machine=sun386 ;; i[3456]86-*-* ) machine=intel386 ;; powerpcle* ) machine=powerpcle ;; powerpc* | rs6000* ) machine=ibmrs6000 ;; sparc* ) machine=sparc ;; * ) unported=yes ;; esac case "${canonical}" in ## The Sun386 didn't get past 4.0. i[3456]86-*-sunos4 ) opsys=sunos4-0 ;; *-sunos4.0* ) opsys=sunos4-0 ;; *-sunos4.1.[3-9]*noshare ) ## This name is sunos413 instead of sunos4-1-3 ## to avoid a file name conflict on MSDOS. opsys=sunos413 NON_GNU_CPP=/usr/lib/cpp NON_GCC_TEST_OPTIONS=-Bstatic GCC_TEST_OPTIONS=-static ;; *-sunos4.1.[3-9]* | *-sunos4shr*) opsys=sunos4shr NON_GNU_CPP=/usr/lib/cpp ;; *-sunos4* | *-sunos ) opsys=sunos4-1 NON_GCC_TEST_OPTIONS=-Bstatic GCC_TEST_OPTIONS=-static ;; *-sunos5.3* | *-solaris2.3* ) opsys=sol2-3 NON_GNU_CPP=/usr/ccs/lib/cpp ;; *-sunos5.4* | *-solaris2.4* ) opsys=sol2-4 NON_GNU_CPP=/usr/ccs/lib/cpp RANLIB="ar -ts" ;; *-sunos5.5* | *-solaris2.5* ) opsys=sol2-5 NON_GNU_CPP=/usr/ccs/lib/cpp RANLIB="ar -ts" ;; *-sunos5* | *-solaris* ) opsys=sol2-5 NON_GNU_CPP=/usr/ccs/lib/cpp ;; * ) opsys=bsd4-2 ;; esac ## Watch out for a compiler that we know will not work. case "${canonical}" in *-solaris* | *-sunos5* ) if [ "x$CC" = x/usr/ucb/cc ]; then ## /usr/ucb/cc doesn't work; ## we should find some other compiler that does work. unset CC fi ;; *) ;; esac ;; sparc-*-nextstep* ) machine=sparc opsys=nextstep ;; ## Tadpole 68k m68*-tadpole-sysv* ) machine=tad68k opsys=usg5-3 ;; ## Tahoe machines tahoe-tahoe-bsd4.2* ) machine=tahoe opsys=bsd4-2 ;; tahoe-tahoe-bsd4.3* ) machine=tahoe opsys=bsd4-3 ;; ## Tandem Integrity S2 mips-tandem-sysv* ) machine=tandem-s2 opsys=usg5-3 ;; ## Tektronix XD88 m88k-tektronix-sysv3* ) machine=tekxd88 opsys=usg5-3 ;; ## Tektronix 16000 box (6130?) ns16k-tektronix-bsd* ) machine=ns16000 opsys=bsd4-2 ;; ## Tektronix 4300 ## src/m/tek4300.h hints that this is a m68k machine. m68*-tektronix-bsd* ) machine=tek4300 opsys=bsd4-3 ;; ## Titan P2 or P3 ## We seem to have lost the machine-description file titan.h! titan-titan-sysv* ) machine=titan opsys=usg5-3 ;; ## Ustation E30 (SS5E) m68*-unisys-uniplus* ) machine=ustation opsystem=unipl5-2 ;; ## Vaxen. vax-dec-* ) machine=vax case "${canonical}" in *-bsd4.1* ) opsys=bsd4-1 ;; *-bsd4.2* | *-ultrix[0-3].* | *-ultrix4.0* ) opsys=bsd4-2 ;; *-bsd4.3* | *-ultrix* ) opsys=bsd4-3 ;; *-sysv[01]* | *-sysvr[01]* ) opsys=usg5-0 ;; *-sysv2* | *-sysvr2* ) opsys=usg5-2 ;; *-vms* ) opsys=vms ;; * ) unported=yes esac ;; ## Whitechapel MG1 ns16k-whitechapel-* ) machine=mg1 ## We don't know what sort of OS runs on these; we'll let the ## operating system guessing code below try. ;; ## Wicat m68*-wicat-sysv* ) machine=wicat opsys=usg5-2 ;; ## IA-64 ia64*-*-linux* ) machine=ia64 opsys=gnu-linux ;; ## Intel 386 machines where we don't care about the manufacturer i[3456]86-*-* ) machine=intel386 case "${canonical}" in *-lynxos* ) opsys=lynxos ;; *-isc1.* | *-isc2.[01]* ) opsys=386-ix ;; *-isc2.2* ) opsys=isc2-2 ;; *-isc4.0* ) opsys=isc4-0 ;; *-isc4.* ) opsys=isc4-1 GCC_TEST_OPTIONS=-posix NON_GCC_TEST_OPTIONS=-Xp ;; *-isc* ) opsys=isc3-0 ;; *-esix5* ) opsys=esix5r4; NON_GNU_CPP=/usr/lib/cpp ;; *-esix* ) opsys=esix ;; *-xenix* ) opsys=xenix ;; *-linux-gnu* ) opsys=gnu-linux ;; *-sco3.2v4* ) opsys=sco4 ; NON_GNU_CPP=/lib/cpp ;; *-sco3.2v5* ) opsys=sco5 NON_GNU_CPP=/lib/cpp # Prevent -belf from being passed to $CPP. # /lib/cpp does not accept it. OVERRIDE_CPPFLAGS=" " ;; *-sysv4.2uw* ) opsys=unixware; NON_GNU_CPP=/lib/cpp ;; *-386bsd* ) opsys=386bsd ;; *-nextstep* ) opsys=nextstep ;; ## Otherwise, we'll fall through to the generic opsys code at the bottom. esac ;; ## m68k Linux-based GNU system m68k-*-linux-gnu* ) machine=m68k opsys=gnu-linux ;; ## Mips Linux-based GNU system mips-*-linux-gnu* ) machine=mips opsys=gnu-linux ;; ## UXP/DS sparc-fujitsu-sysv4* ) machine=sparc opsys=uxpds NON_GNU_CPP=/usr/ccs/lib/cpp RANLIB="ar -ts" ;; ## UXP/V f301-fujitsu-uxpv4.1) machine=f301 opsys=uxpv ;; * ) unported=yes ;; esac ### If the code above didn't choose an operating system, just choose ### an operating system based on the configuration name. You really ### only want to use this when you have no idea what the right ### operating system is; if you know what operating systems a machine ### runs, it's cleaner to make it explicit in the case statement ### above. if test x"${opsys}" = x; then case "${canonical}" in *-gnu* ) opsys=gnu ;; *-bsd4.[01] ) opsys=bsd4-1 ;; *-bsd4.2 ) opsys=bsd4-2 ;; *-bsd4.3 ) opsys=bsd4-3 ;; *-sysv0 | *-sysvr0 ) opsys=usg5-0 ;; *-sysv2 | *-sysvr2 ) opsys=usg5-2 ;; *-sysv2.2 | *-sysvr2.2 ) opsys=usg5-2-2 ;; *-sysv3* | *-sysvr3* ) opsys=usg5-3 ;; *-sysv4.2uw* ) opsys=unixware ;; *-sysv4.1* | *-sysvr4.1* ) NON_GNU_CPP=/usr/lib/cpp opsys=usg5-4 ;; *-sysv4.[2-9]* | *-sysvr4.[2-9]* ) if [ x$NON_GNU_CPP = x ]; then if [ -f /usr/ccs/lib/cpp ]; then NON_GNU_CPP=/usr/ccs/lib/cpp else NON_GNU_CPP=/lib/cpp fi fi opsys=usg5-4-2 ;; *-sysv4* | *-sysvr4* ) opsys=usg5-4 ;; * ) unported=yes ;; esac fi changequote([, ])dnl if test $unported = yes; then AC_MSG_ERROR([Emacs hasn't been ported to \`${canonical}' systems. Check \`etc/MACHINES' for recognized configuration names.]) fi machfile="m/${machine}.h" opsysfile="s/${opsys}.h" #### Choose a compiler. test -n "$CC" && cc_specified=yes # Save the value of CFLAGS that the user specified. SPECIFIED_CFLAGS="$CFLAGS" case ${with_gcc} in "yes" ) CC="gcc" GCC=yes ;; "no" ) : ${CC=cc} ;; * ) esac AC_PROG_CC # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi #### Some systems specify a CPP to use unless we are using GCC. #### Now that we know whether we are using GCC, we can decide whether #### to use that one. if test "x$NON_GNU_CPP" != x && test x$GCC != xyes && test "x$CPP" = x then CPP="$NON_GNU_CPP" fi #### Some systems specify a CC to use unless we are using GCC. #### Now that we know whether we are using GCC, we can decide whether #### to use that one. if test "x$NON_GNU_CC" != x && test x$GCC != xyes && test x$cc_specified != xyes then CC="$NON_GNU_CC" fi if test x$GCC = xyes && test "x$GCC_TEST_OPTIONS" != x then CC="$CC $GCC_TEST_OPTIONS" fi if test x$GCC = x && test "x$NON_GCC_TEST_OPTIONS" != x then CC="$CC $NON_GCC_TEST_OPTIONS" fi if test x$GCC = xyes && test "x$GCC_LINK_TEST_OPTIONS" != x then ac_link="$ac_link $GCC_LINK_TEST_OPTIONS" fi if test x$GCC = x && test "x$NON_GCC_LINK_TEST_OPTIONS" != x then ac_link="$ac_link $NON_GCC_LINK_TEST_OPTIONS" fi #### Some other nice autoconf tests. If you add a test here which #### should make an entry in src/config.h, don't forget to add an #### #undef clause to src/config.h.in for autoconf to modify. dnl checks for programs AC_PROG_LN_S AC_PROG_CPP AC_PROG_INSTALL AC_PROG_YACC if test "x$RANLIB" = x; then AC_PROG_RANLIB fi dnl checks for Unix variants AC_AIX #### Extract some information from the operating system and machine files. AC_CHECKING([the machine- and system-dependent files to find out - which libraries the lib-src programs will want, and - whether the GNU malloc routines are usable]) ### First figure out CFLAGS (which we use for running the compiler here) ### and REAL_CFLAGS (which we use for real compilation). ### The two are the same except on a few systems, where they are made ### different to work around various lossages. For example, ### GCC 2.5 on GNU/Linux needs them to be different because it treats -g ### as implying static linking. ### If the CFLAGS env var is specified, we use that value ### instead of the default. ### It's not important that this name contain the PID; you can't run ### two configures in the same directory and have anything work ### anyway. tempcname="conftest.c" echo ' #include "'${srcdir}'/src/'${opsysfile}'" #include "'${srcdir}'/src/'${machfile}'" #ifndef LIBS_MACHINE #define LIBS_MACHINE #endif #ifndef LIBS_SYSTEM #define LIBS_SYSTEM #endif #ifndef C_SWITCH_SYSTEM #define C_SWITCH_SYSTEM #endif #ifndef C_SWITCH_MACHINE #define C_SWITCH_MACHINE #endif configure___ libsrc_libs=LIBS_MACHINE LIBS_SYSTEM configure___ c_switch_system=C_SWITCH_SYSTEM configure___ c_switch_machine=C_SWITCH_MACHINE #ifndef LIB_X11_LIB #define LIB_X11_LIB -lX11 #endif #ifndef LIBX11_MACHINE #define LIBX11_MACHINE #endif #ifndef LIBX11_SYSTEM #define LIBX11_SYSTEM #endif configure___ LIBX=LIB_X11_LIB LIBX11_MACHINE LIBX11_SYSTEM #ifdef UNEXEC configure___ unexec=UNEXEC #else configure___ unexec=unexec.o #endif #ifdef SYSTEM_MALLOC configure___ system_malloc=yes #else configure___ system_malloc=no #endif #ifdef USE_MMAP_FOR_BUFFERS configure___ use_mmap_for_buffers=yes #else configure___ use_mmap_for_buffers=no #endif #ifndef C_DEBUG_SWITCH #define C_DEBUG_SWITCH -g #endif #ifndef C_OPTIMIZE_SWITCH #ifdef __GNUC__ #define C_OPTIMIZE_SWITCH -O2 #else #define C_OPTIMIZE_SWITCH -O #endif #endif #ifndef LD_SWITCH_MACHINE #define LD_SWITCH_MACHINE #endif #ifndef LD_SWITCH_SYSTEM #define LD_SWITCH_SYSTEM #endif #ifndef LD_SWITCH_X_SITE_AUX #define LD_SWITCH_X_SITE_AUX #endif configure___ ld_switch_system=LD_SWITCH_SYSTEM configure___ ld_switch_machine=LD_SWITCH_MACHINE #ifdef THIS_IS_CONFIGURE /* Get the CFLAGS for tests in configure. */ #ifdef __GNUC__ configure___ CFLAGS=C_DEBUG_SWITCH C_OPTIMIZE_SWITCH '${SPECIFIED_CFLAGS}' #else configure___ CFLAGS=C_DEBUG_SWITCH '${SPECIFIED_CFLAGS}' #endif #else /* not THIS_IS_CONFIGURE */ /* Get the CFLAGS for real compilation. */ #ifdef __GNUC__ configure___ REAL_CFLAGS=C_DEBUG_SWITCH C_OPTIMIZE_SWITCH '${SPECIFIED_CFLAGS}' #else configure___ REAL_CFLAGS=C_DEBUG_SWITCH '${SPECIFIED_CFLAGS}' #endif #endif /* not THIS_IS_CONFIGURE */ ' > ${tempcname} # The value of CPP is a quoted variable reference, so we need to do this # to get its actual value... CPP=`eval "echo $CPP"` changequote(, )dnl eval `${CPP} -Isrc ${tempcname} \ | sed -n -e 's/^configure___ \([^=]*=\)\(.*\)$/\1"\2"/p'` if test "x$SPECIFIED_CFLAGS" = x; then eval `${CPP} -Isrc -DTHIS_IS_CONFIGURE ${tempcname} \ | sed -n -e 's/^configure___ \([^=]*=\)\(.*\)$/\1"\2"/p'` else REAL_CFLAGS="$CFLAGS" fi changequote([, ])dnl rm ${tempcname} ac_link="$ac_link $ld_switch_machine $ld_switch_system" ### Make sure subsequent tests use flags consistent with the build flags. if test x"${OVERRIDE_CPPFLAGS}" != x; then CPPFLAGS="${OVERRIDE_CPPFLAGS}" else CPPFLAGS="$c_switch_system $c_switch_machine $CPPFLAGS" fi dnl Do this early because it can frob feature test macros for Unix-98 &c. AC_SYS_LARGEFILE # Sound support for GNU/Linux and the free BSDs. AC_CHECK_HEADERS(machine/soundcard.h sys/soundcard.h soundcard.h) # Emulation library used on NetBSD. AC_CHECK_LIB(ossaudio, _oss_ioctl, LIBSOUND=-lossaudio, LIBSOUND=) AC_SUBST(LIBSOUND) dnl checks for header files AC_CHECK_HEADERS(sys/select.h sys/timeb.h sys/time.h unistd.h utime.h \ linux/version.h sys/systeminfo.h termios.h limits.h string.h stdlib.h \ termcap.h stdio_ext.h fcntl.h term.h strings.h coff.h) AC_HEADER_STDC AC_HEADER_TIME AC_DECL_SYS_SIGLIST AC_HEADER_SYS_WAIT dnl Some systems have utime.h but don't declare the struct anyplace. AC_CACHE_CHECK(for struct utimbuf, emacs_cv_struct_utimbuf, AC_TRY_COMPILE([#ifdef TIME_WITH_SYS_TIME #include <sys/time.h> #include <time.h> #else #ifdef HAVE_SYS_TIME_H #include <sys/time.h> #else #include <time.h> #endif #endif #ifdef HAVE_UTIME_H #include <utime.h> #endif], [static struct utimbuf x; x.actime = x.modtime;], emacs_cv_struct_utimbuf=yes, emacs_cv_struct_utimbuf=no)) if test $emacs_cv_struct_utimbuf = yes; then AC_DEFINE(HAVE_STRUCT_UTIMBUF) fi dnl checks for typedefs AC_TYPE_SIGNAL dnl Check for speed_t typedef. AC_CACHE_CHECK(for speed_t, emacs_cv_speed_t, AC_TRY_COMPILE([#include <termios.h>], [speed_t x = 1;], emacs_cv_speed_t=yes, emacs_cv_speed_t=no)) if test $emacs_cv_speed_t = yes; then AC_DEFINE(HAVE_SPEED_T) fi AC_CACHE_CHECK(for struct timeval, emacs_cv_struct_timeval, AC_TRY_COMPILE([#ifdef TIME_WITH_SYS_TIME #include <sys/time.h> #include <time.h> #else #ifdef HAVE_SYS_TIME_H #include <sys/time.h> #else #include <time.h> #endif #endif], [static struct timeval x; x.tv_sec = x.tv_usec;], emacs_cv_struct_timeval=yes, emacs_cv_struct_timeval=no)) HAVE_TIMEVAL=$emacs_cv_struct_timeval if test $emacs_cv_struct_timeval = yes; then AC_DEFINE(HAVE_TIMEVAL) fi AC_CACHE_CHECK(for struct exception, emacs_cv_struct_exception, AC_TRY_COMPILE([#include <math.h>], [static struct exception x; x.arg1 = x.arg2 = x.retval; x.name = ""; x.type = 1;], emacs_cv_struct_exception=yes, emacs_cv_struct_exception=no)) HAVE_EXCEPTION=$emacs_cv_struct_exception if test $emacs_cv_struct_exception != yes; then AC_DEFINE(NO_MATHERR) fi dnl checks for structure members AC_STRUCT_TM AC_STRUCT_TIMEZONE AC_CACHE_CHECK(for tm_gmtoff in struct tm, emacs_cv_tm_gmtoff, AC_TRY_LINK([#include <time.h>], [struct tm t; t.tm_gmtoff = 0], emacs_cv_tm_gmtoff=yes, emacs_cv_tm_gmtoff=no)) if test $emacs_cv_tm_gmtoff = yes; then AC_DEFINE(HAVE_TM_GMTOFF) fi dnl checks for compiler characteristics dnl Testing __STDC__ to determine prototype support isn't good enough. dnl DEC C, for instance, doesn't define it with default options, and dnl is used on 64-bit systems (OSF Alphas). Similarly for volatile dnl and void *. AC_C_PROTOTYPES AC_C_VOLATILE AC_C_CONST dnl This isn't useful because we can't turn on use of `inline' unless dnl the compiler groks `extern inline'. dnl AC_C_INLINE AC_CACHE_CHECK([for void * support], emacs_cv_void_star, [AC_TRY_COMPILE(, [void * foo;], emacs_cv_void_star=yes, emacs_cv_void_star=no)]) if test $emacs_cv_void_star = yes; then AC_DEFINE(POINTER_TYPE, void) else AC_DEFINE(POINTER_TYPE, char) fi dnl check for Make feature AC_PROG_MAKE_SET dnl checks for operating system services AC_SYS_LONG_FILE_NAMES #### Choose a window system. AC_PATH_X if test "$no_x" = yes; then window_system=none else window_system=x11 fi if test "${x_libraries}" != NONE && test -n "${x_libraries}"; then LD_SWITCH_X_SITE=-L`echo ${x_libraries} | sed -e "s/:/ -L/g"` LD_SWITCH_X_SITE_AUX=-R`echo ${x_libraries} | sed -e "s/:/ -R/g"` x_default_search_path="" for x_library in `echo ${x_libraries} | sed -e "s/:/ /g"`; do x_search_path="\ ${x_library}/X11/%L/%T/%N%C%S:\ ${x_library}/X11/%l/%T/%N%C%S:\ ${x_library}/X11/%T/%N%C%S:\ ${x_library}/X11/%L/%T/%N%S:\ ${x_library}/X11/%l/%T/%N%S:\ ${x_library}/X11/%T/%N%S" if test x"${x_default_search_path}" = x; then x_default_search_path=${x_search_path} else x_default_search_path="${x_search_path}:${x_default_search_path}" fi done fi if test "${x_includes}" != NONE && test -n "${x_includes}"; then C_SWITCH_X_SITE=-I`echo ${x_includes} | sed -e "s/:/ -I/g"` fi if test x"${x_includes}" = x; then bitmapdir=/usr/include/X11/bitmaps else # accumulate include directories that have X11 bitmap subdirectories bmd_acc="dummyval" for bmd in `echo ${x_includes} | sed -e "s/:/ /g"`; do if test -d "${bmd}/X11/bitmaps"; then bmd_acc="${bmd_acc}:${bmd}/X11/bitmaps" fi if test -d "${bmd}/bitmaps"; then bmd_acc="${bmd_acc}:${bmd}/bitmaps" fi done if test ${bmd_acc} != "dummyval"; then bitmapdir=`echo ${bmd_acc} | sed -e "s/^dummyval://"` fi fi case "${window_system}" in x11 ) HAVE_X_WINDOWS=yes HAVE_X11=yes case "${with_x_toolkit}" in athena | lucid ) USE_X_TOOLKIT=LUCID ;; motif ) USE_X_TOOLKIT=MOTIF ;; dnl open-look ) USE_X_TOOLKIT=OPEN_LOOK ;; no ) USE_X_TOOLKIT=none ;; dnl If user did not say whether to use a toolkit, dnl make this decision later: use the toolkit if we have X11R5 or newer. * ) USE_X_TOOLKIT=maybe ;; esac ;; none ) HAVE_X_WINDOWS=no HAVE_X11=no USE_X_TOOLKIT=none ;; esac ### If we're using X11, we should use the X menu package. HAVE_MENUS=no case ${HAVE_X11} in yes ) HAVE_MENUS=yes ;; esac if test "${opsys}" = "hpux9"; then case "${x_libraries}" in *X11R4* ) opsysfile="s/hpux9-x11r4.h" ;; esac fi if test "${opsys}" = "hpux9shr"; then case "${x_libraries}" in *X11R4* ) opsysfile="s/hpux9shxr4.h" ;; esac fi ### Compute the unexec source name from the object name. UNEXEC_SRC="`echo ${unexec} | sed 's/\.o/.c/'`" # Do the opsystem or machine files prohibit the use of the GNU malloc? # Assume not, until told otherwise. GNU_MALLOC=yes doug_lea_malloc=yes AC_CHECK_FUNC(malloc_get_state, ,doug_lea_malloc=no) AC_CHECK_FUNC(malloc_set_state, ,doug_lea_malloc=no) AC_CACHE_CHECK(whether __after_morecore_hook exists, emacs_cv_var___after_morecore_hook, [AC_TRY_LINK([extern void (* __after_morecore_hook)();],[__after_morecore_hook = 0], emacs_cv_var___after_morecore_hook=yes, emacs_cv_var___after_morecore_hook=no)]) if test $emacs_cv_var___after_morecore_hook = no; then doug_lea_malloc=no fi if test "${system_malloc}" = "yes"; then GNU_MALLOC=no GNU_MALLOC_reason=" (The GNU allocators don't work with this system configuration.)" fi if test "$doug_lea_malloc" = "yes" ; then if test "$GNU_MALLOC" = yes ; then GNU_MALLOC_reason=" (Using Doug Lea's new malloc from the GNU C Library.)" fi AC_DEFINE(DOUG_LEA_MALLOC) fi if test x"${REL_ALLOC}" = x; then REL_ALLOC=${GNU_MALLOC} fi dnl For now, need to use an explicit `#define USE_MMAP_FOR_BUFFERS 1' dnl the system configuration file (s/*.h) to turn the use of mmap dnl in the relocating allocator on. AC_FUNC_MMAP if test $use_mmap_for_buffers = yes; then REL_ALLOC=no fi LIBS="$libsrc_libs $LIBS" dnl If found, this defines HAVE_LIBDNET, which m/pmax.h checks, dnl and also adds -ldnet to LIBS, which Autoconf uses for checks. AC_CHECK_LIB(dnet, dnet_ntoa) dnl This causes -lresolv to get used in subsequent tests, dnl which causes failures on some systems such as HPUX 9. dnl AC_CHECK_LIB(resolv, gethostbyname) dnl FIXME replace main with a function we actually want from this library. AC_CHECK_LIB(Xbsd, main, LD_SWITCH_X_SITE="$LD_SWITCH_X_SITE -lXbsd") AC_CHECK_LIB(pthreads, cma_open) AC_MSG_CHECKING(for XFree86 in /usr/X386) if test -d /usr/X386/include; then HAVE_XFREE386=yes : ${C_SWITCH_X_SITE="-I/usr/X386/include"} else HAVE_XFREE386=no fi AC_MSG_RESULT($HAVE_XFREE386) # Change CFLAGS temporarily so that C_SWITCH_X_SITE gets used # for the tests that follow. We set it back to REAL_CFLAGS later on. REAL_CPPFLAGS="$CPPFLAGS" if test "${HAVE_X11}" = "yes"; then DEFS="$C_SWITCH_X_SITE $DEFS" LDFLAGS="$LDFLAGS $LD_SWITCH_X_SITE" LIBS="$LIBX $LIBS" CFLAGS="$C_SWITCH_X_SITE $CFLAGS" CPPFLAGS="$C_SWITCH_X_SITE $CPPFLAGS" # On Solaris, arrange for LD_RUN_PATH to point to the X libraries for tests. # This is handled by LD_SWITCH_X_SITE_AUX during the real build, # but it's more convenient here to set LD_RUN_PATH # since this also works on hosts that don't understand LD_SWITCH_X_SITE_AUX. if test "${x_libraries}" != NONE && test -n "${x_libraries}"; then LD_RUN_PATH=$x_libraries${LD_RUN_PATH+:}$LD_RUN_PATH export LD_RUN_PATH fi if test "${opsys}" = "gnu-linux"; then AC_MSG_CHECKING(whether X on GNU/Linux needs -b to link) AC_TRY_LINK([], [XOpenDisplay ("foo");], [xlinux_first_failure=no], [xlinux_first_failure=yes]) if test "${xlinux_first_failure}" = "yes"; then OLD_LD_SWITCH_X_SITE="$LD_SWITCH_X_SITE" OLD_C_SWITCH_X_SITE="$C_SWITCH_X_SITE" OLD_CPPFLAGS="$CPPFLAGS" OLD_LIBS="$LIBS" LD_SWITCH_X_SITE="$LD_SWITCH_X_SITE -b i486-linuxaout" C_SWITCH_X_SITE="$C_SWITCH_X_SITE -b i486-linuxaout" CPPFLAGS="$CPPFLAGS -b i486-linuxaout" LIBS="$LIBS -b i486-linuxaout" AC_TRY_LINK([], [XOpenDisplay ("foo");], [xlinux_second_failure=no], [xlinux_second_failure=yes]) if test "${xlinux_second_failure}" = "yes"; then # If we get the same failure with -b, there is no use adding -b. # So take it out. This plays safe. LD_SWITCH_X_SITE="$OLD_LD_SWITCH_X_SITE" C_SWITCH_X_SITE="$OLD_C_SWITCH_X_SITE" CPPFLAGS="$OLD_CPPFLAGS" LIBS="$OLD_LIBS" AC_MSG_RESULT(no) else AC_MSG_RESULT(yes) fi else AC_MSG_RESULT(no) fi fi # Reportedly, some broken Solaris systems have XKBlib.h but are missing # header files included from there. AC_MSG_CHECKING(for Xkb) AC_TRY_LINK([#include <X11/Xlib.h> #include <X11/XKBlib.h>], [XkbDescPtr kb = XkbGetKeyboard (0, XkbAllComponentsMask, XkbUseCoreKbd);], emacs_xkb=yes, emacs_xkb=no) AC_MSG_RESULT($emacs_xkb) if test $emacs_xkb = yes; then AC_DEFINE(HAVE_XKBGETKEYBOARD) fi AC_CHECK_FUNCS(XrmSetDatabase XScreenResourceString \ XScreenNumberOfScreen XSetWMProtocols) fi if test "${window_system}" = "x11"; then AC_MSG_CHECKING(X11 version 6) AC_CACHE_VAL(emacs_cv_x11_version_6, [AC_TRY_LINK([#include <X11/Xlib.h>], [#if XlibSpecificationRelease < 6 fail; #endif ], emacs_cv_x11_version_6=yes, emacs_cv_x11_version_6=no)]) if test $emacs_cv_x11_version_6 = yes; then AC_MSG_RESULT(6 or newer) AC_DEFINE(HAVE_X11R6) else AC_MSG_RESULT(before 6) fi fi if test "${window_system}" = "x11"; then AC_MSG_CHECKING(X11 version 5) AC_CACHE_VAL(emacs_cv_x11_version_5, [AC_TRY_LINK([#include <X11/Xlib.h>], [#if XlibSpecificationRelease < 5 fail; #endif ], emacs_cv_x11_version_5=yes, emacs_cv_x11_version_5=no)]) if test $emacs_cv_x11_version_5 = yes; then AC_MSG_RESULT(5 or newer) HAVE_X11R5=yes AC_DEFINE(HAVE_X11R5) else HAVE_X11R5=no AC_MSG_RESULT(before 5) fi fi dnl Do not put whitespace before the #include statements below. dnl Older compilers (eg sunos4 cc) choke on it. if test x"${USE_X_TOOLKIT}" = xmaybe; then if test x"${HAVE_X11R5}" = xyes; then AC_MSG_CHECKING(X11 version 5 with Xaw) AC_CACHE_VAL(emacs_cv_x11_version_5_with_xaw, [AC_TRY_LINK([ #include <X11/Intrinsic.h> #include <X11/Xaw/Simple.h>], [], emacs_cv_x11_version_5_with_xaw=yes, emacs_cv_x11_version_5_with_xaw=no)]) if test $emacs_cv_x11_version_5_with_xaw = yes; then AC_MSG_RESULT([5 or newer, with Xaw; use toolkit by default]) USE_X_TOOLKIT=LUCID else AC_MSG_RESULT(before 5 or no Xaw; do not use toolkit by default) USE_X_TOOLKIT=none fi else USE_X_TOOLKIT=none fi fi X_TOOLKIT_TYPE=$USE_X_TOOLKIT if test "${USE_X_TOOLKIT}" != "none"; then AC_MSG_CHECKING(X11 toolkit version) AC_CACHE_VAL(emacs_cv_x11_toolkit_version_6, [AC_TRY_LINK([#include <X11/Intrinsic.h>], [#if XtSpecificationRelease < 6 fail; #endif ], emacs_cv_x11_toolkit_version_6=yes, emacs_cv_x11_toolkit_version_6=no)]) HAVE_X11XTR6=$emacs_cv_x11_toolkit_version_6 if test $emacs_cv_x11_toolkit_version_6 = yes; then AC_MSG_RESULT(6 or newer) AC_DEFINE(HAVE_X11XTR6) else AC_MSG_RESULT(before 6) fi dnl If using toolkit, check whether libXmu.a exists. dnl tranle@intellicorp.com says libXmu.a can need XtMalloc in libXt.a to link. OLDLIBS="$LIBS" if test x$HAVE_X11XTR6 = xyes; then LIBS="-lXt -lSM -lICE $LIBS" else LIBS="-lXt $LIBS" fi AC_CHECK_LIB(Xmu, XmuConvertStandardSelection) test $ac_cv_lib_Xmu_XmuConvertStandardSelection = no && LIBS="$OLDLIBS" fi # On Irix 6.5, at least, we need XShapeQueryExtension from -lXext for Xaw3D. if test "${HAVE_X11}" = "yes"; then if test "${USE_X_TOOLKIT}" != "none"; then AC_CHECK_LIB(Xext, XShapeQueryExtension) fi fi if test "${USE_X_TOOLKIT}" = "MOTIF"; then AC_CACHE_CHECK(for Motif version 2.1, emacs_cv_motif_version_2_1, [AC_TRY_COMPILE([#include <Xm/Xm.h>], [#if XmVERSION > 2 || (XmVERSION == 2 && XmREVISION >= 1) int x = 5; #else Motif version prior to 2.1. #endif], emacs_cv_motif_version_2_1=yes, emacs_cv_motif_version_2_1=no)]) HAVE_MOTIF_2_1=$emacs_cv_motif_version_2_1 if test $emacs_cv_motif_version_2_1 = yes; then HAVE_LIBXP=no AC_DEFINE(HAVE_MOTIF_2_1) AC_CHECK_LIB(Xp, XpCreateContext, HAVE_LIBXP=yes) if test ${HAVE_LIBXP} = yes; then AC_DEFINE(HAVE_LIBXP) fi fi fi ### Is -lXaw3d available? HAVE_XAW3D=no if test "${HAVE_X11}" = "yes"; then if test "${USE_X_TOOLKIT}" != "none"; then AC_CHECK_HEADER(X11/Xaw3d/Scrollbar.h, AC_CHECK_LIB(Xaw3d, XawScrollbarSetThumb, HAVE_XAW3D=yes)) if test "${HAVE_XAW3D}" = "yes"; then AC_DEFINE(HAVE_XAW3D) fi fi fi dnl Use toolkit scroll bars if configured for X toolkit and either dnl using Motif or Xaw3d is available, and unless dnl --with-toolkit-scroll-bars=no was specified. USE_TOOLKIT_SCROLL_BARS=no if test "${with_toolkit_scroll_bars}" != "no"; then if test "${USE_X_TOOLKIT}" != "none"; then if test "${USE_X_TOOLKIT}" = "MOTIF"; then AC_DEFINE(USE_TOOLKIT_SCROLL_BARS) HAVE_XAW3D=no USE_TOOLKIT_SCROLL_BARS=yes elif test "${HAVE_XAW3D}" = "yes"; then AC_DEFINE(USE_TOOLKIT_SCROLL_BARS) USE_TOOLKIT_SCROLL_BARS=yes fi fi fi dnl Don't use X11 input methods if user specifies he doesn't want it dnl with `--with-xim=no'. if test "${with_xim}" != "no"; then AC_DEFINE(USE_XIM) fi ### Use -lXpm if available, unless `--with-xpm=no'. HAVE_XPM=no if test "${HAVE_X11}" = "yes"; then if test "${with_xpm}" != "no"; then AC_CHECK_HEADER(X11/xpm.h, AC_CHECK_LIB(Xpm, XpmReadFileToPixmap, HAVE_XPM=yes, , -lX11)) if test "${HAVE_XPM}" = "yes"; then AC_MSG_CHECKING(for XpmReturnAllocPixels preprocessor define) AC_EGREP_CPP(no_return_alloc_pixels, [#include "X11/xpm.h" #ifndef XpmReturnAllocPixels no_return_alloc_pixels #endif ], HAVE_XPM=no, HAVE_XPM=yes) if test "${HAVE_XPM}" = "yes"; then AC_MSG_RESULT(yes) else AC_MSG_RESULT(no) fi fi fi if test "${HAVE_XPM}" = "yes"; then AC_DEFINE(HAVE_XPM) fi fi ### Use -ljpeg if available, unless `--with-jpeg=no'. HAVE_JPEG=no if test "${HAVE_X11}" = "yes"; then if test "${with_jpeg}" != "no"; then dnl Checking for jpeglib.h can lose becsue of a redefinition of dnl HAVE_STDLIB_H. AC_CHECK_HEADER(jerror.h, AC_CHECK_LIB(jpeg, jpeg_destroy_compress, HAVE_JPEG=yes)) fi if test "${HAVE_JPEG}" = "yes"; then AC_DEFINE(HAVE_JPEG) fi fi ### Use -lpng if available, unless `--with-png=no'. HAVE_PNG=no if test "${HAVE_X11}" = "yes"; then if test "${with_png}" != "no"; then AC_CHECK_HEADER(png.h, AC_CHECK_LIB(png, png_get_channels, HAVE_PNG=yes, , -lz -lm)) fi if test "${HAVE_PNG}" = "yes"; then AC_DEFINE(HAVE_PNG) fi fi ### Use -ltiff if available, unless `--with-tiff=no'. HAVE_TIFF=no if test "${HAVE_X11}" = "yes"; then if test "${with_tiff}" != "no"; then AC_CHECK_HEADER(tiffio.h, tifflibs="-lz -lm" # At least one tiff package requires the jpeg library. if test "${HAVE_JPEG}" = yes; then tifflibs="-ljpeg $tifflibs"; fi AC_CHECK_LIB(tiff, TIFFGetVersion, HAVE_TIFF=yes, , $tifflibs)) fi if test "${HAVE_TIFF}" = "yes"; then AC_DEFINE(HAVE_TIFF) fi fi ### Use -lgif if available, unless `--with-gif=no'. HAVE_GIF=no if test "${HAVE_X11}" = "yes"; then if test "${with_gif}" != "no"; then AC_CHECK_HEADER(gif_lib.h, AC_CHECK_LIB(ungif, DGifOpen, HAVE_GIF=yes)) fi if test "${HAVE_GIF}" = "yes"; then AC_DEFINE(HAVE_GIF) fi fi # If netdb.h doesn't declare h_errno, we must declare it by hand. AC_CACHE_CHECK(whether netdb declares h_errno, emacs_cv_netdb_declares_h_errno, [AC_TRY_LINK([#include <netdb.h>], [return h_errno;], emacs_cv_netdb_declares_h_errno=yes, emacs_cv_netdb_declares_h_errno=no)]) if test $emacs_cv_netdb_declares_h_errno = yes; then AC_DEFINE(HAVE_H_ERRNO) fi AC_FUNC_ALLOCA # fmod, logb, and frexp are found in -lm on most systems. # On HPUX 9.01, -lm does not contain logb, so check for sqrt. AC_CHECK_LIB(m, sqrt) # Check for mail-locking functions in a "mail" library AC_CHECK_LIB(mail, maillock) dnl Debian, at least: dnl AC_CHECK_LIB(lockfile, maillock, [AC_DEFINE(HAVE_LIBMAIL)]) AC_CHECK_LIB(lockfile, maillock) # If we have the shared liblockfile, assume we must use it for mail # locking (e.g. Debian). If we couldn't link against liblockfile # (no liblockfile.a installed), ensure that we don't need to. if test "$ac_cv_lib_lockfile_maillock" = no; then dnl This works for files generally, not just executables. dnl Should we look elsewhere for it? Maybe examine /etc/ld.so.conf? AC_CHECK_PROG(liblockfile, liblockfile.so, yes, no, /usr/lib:/lib:/usr/local/lib:$LD_LIBRARY_PATH) if test $ac_cv_prog_liblockfile = yes; then AC_MSG_ERROR([Shared liblockfile found but can't link against it. This probably means that movemail could lose mail. There may be a \`development' package to install containing liblockfile.]) else AC_DEFINE(LIBMAIL, -llockfile) fi else : fi AC_CHECK_FUNCS(touchlock) AC_CHECK_HEADERS(maillock.h) AC_CHECK_FUNCS(gethostname getdomainname dup2 \ rename closedir mkdir rmdir sysinfo \ random lrand48 bcopy bcmp logb frexp fmod rint cbrt ftime res_init setsid \ strerror fpathconf select mktime euidaccess getpagesize tzset setlocale \ utimes setrlimit setpgid getcwd getwd shutdown strftime getaddrinfo \ __fpending mblen mbrlen mbsinit strsignal setitimer ualarm index rindex \ gai_strerror mkstemp) AC_FUNC_MKTIME if test "$ac_cv_func_working_mktime" = no; then AC_DEFINE(BROKEN_MKTIME) fi AC_FUNC_GETLOADAVG AC_FUNC_FSEEKO # UNIX98 PTYs. AC_CHECK_FUNCS(grantpt) # PTY-related GNU extensions. AC_CHECK_FUNCS(getpt) # Check this now, so that we will NOT find the above functions in ncurses. # That is because we have not set up to link ncurses in lib-src. # It's better to believe a function is not available # than to expect to find it in ncurses. AC_CHECK_LIB(ncurses, tparm) # Do we need the Hesiod library to provide the support routines? if test "$with_hesiod" = yes ; then # Don't set $LIBS here -- see comments above. resolv=no AC_CHECK_FUNC(res_send, , [AC_CHECK_FUNC(__res_send, , [AC_CHECK_LIB(resolv, res_send, resolv=yes, [AC_CHECK_LIB(resolv, __res_send, resolv=yes)])])]) if test "$resolv" = yes ; then RESOLVLIB=-lresolv AC_DEFINE(HAVE_LIBRESOLV) else RESOLVLIB= fi AC_CHECK_FUNC(hes_getmailhost, , [AC_CHECK_LIB(hesiod, hes_getmailhost, AC_DEFINE(HAVE_LIBHESIOD), :, $RESOLVLIB)]) fi # These tell us which Kerberos-related libraries to use. if test "${with_kerberos+set}" = set; then AC_CHECK_LIB(com_err, com_err) AC_CHECK_LIB(k5crypto, mit_des_cbc_encrypt) AC_CHECK_LIB(crypto, mit_des_cbc_encrypt) AC_CHECK_LIB(krb5, krb5_init_context) if test "${with_kerberos5+set}" != set; then AC_CHECK_LIB(des425, des_cbc_encrypt,, AC_CHECK_LIB(des, des_cbc_encrypt)) AC_CHECK_LIB(krb4, krb_get_cred,, AC_CHECK_LIB(krb, krb_get_cred)) fi if test "${with_kerberos5+set}" = set; then AC_CHECK_HEADERS(krb5.h) else AC_CHECK_HEADERS(des.h,, [AC_CHECK_HEADERS(kerberosIV/des.h,, [AC_CHECK_HEADERS(kerberos/des.h)])]) AC_CHECK_HEADERS(krb.h,, [AC_CHECK_HEADERS(kerberosIV/krb.h,, [AC_CHECK_HEADERS(kerberos/krb.h)])]) fi AC_CHECK_HEADERS(com_err.h) fi # Solaris requires -lintl if you want strerror (which calls dgettext) # to return localized messages. AC_CHECK_LIB(intl, dgettext) AC_MSG_CHECKING(whether localtime caches TZ) AC_CACHE_VAL(emacs_cv_localtime_cache, [if test x$ac_cv_func_tzset = xyes; then AC_TRY_RUN([#include <time.h> extern char **environ; unset_TZ () { char **from, **to; for (to = from = environ; (*to = *from); from++) if (! (to[0][0] == 'T' && to[0][1] == 'Z' && to[0][2] == '=')) to++; } char TZ_GMT0[] = "TZ=GMT0"; char TZ_PST8[] = "TZ=PST8"; main() { time_t now = time ((time_t *) 0); int hour_GMT0, hour_unset; if (putenv (TZ_GMT0) != 0) exit (1); hour_GMT0 = localtime (&now)->tm_hour; unset_TZ (); hour_unset = localtime (&now)->tm_hour; if (putenv (TZ_PST8) != 0) exit (1); if (localtime (&now)->tm_hour == hour_GMT0) exit (1); unset_TZ (); if (localtime (&now)->tm_hour != hour_unset) exit (1); exit (0); }], emacs_cv_localtime_cache=no, emacs_cv_localtime_cache=yes, [# If we have tzset, assume the worst when cross-compiling. emacs_cv_localtime_cache=yes]) else # If we lack tzset, report that localtime does not cache TZ, # since we can't invalidate the cache if we don't have tzset. emacs_cv_localtime_cache=no fi])dnl AC_MSG_RESULT($emacs_cv_localtime_cache) if test $emacs_cv_localtime_cache = yes; then AC_DEFINE(LOCALTIME_CACHE) fi if test "x$HAVE_TIMEVAL" = xyes; then AC_CHECK_FUNCS(gettimeofday) AC_CACHE_CHECK(whether gettimeofday can accept two arguments, emacs_cv_gettimeofday_two_arguments, [AC_TRY_COMPILE([ #ifdef TIME_WITH_SYS_TIME #include <sys/time.h> #include <time.h> #else #ifdef HAVE_SYS_TIME_H #include <sys/time.h> #else #include <time.h> #endif #endif], [struct timeval time; gettimeofday (&time, 0);], emacs_cv_gettimeofday_two_arguments=yes, emacs_cv_gettimeofday_two_arguments=no)]) if test $emacs_cv_gettimeofday_two_arguments = no; then AC_DEFINE(GETTIMEOFDAY_ONE_ARGUMENT) fi fi dnl Note that AC_STRUCT_TIMEZONE doesn't do what you might expect. if test "$ac_cv_func_gettimeofday" = yes; then AC_CACHE_CHECK([for struct timezone], emacs_cv_struct_timezone, [AC_TRY_COMPILE([#include <sys/time.h>], [struct timezone tz;], dnl It may be that we can't call gettimeofday with a non-null pointer, dnl even though we have struct timezone (e.g. HPUX). In that case dnl we'll lie about struct timezone. [AC_TRY_RUN([ #ifdef TIME_WITH_SYS_TIME #include <sys/time.h> #include <time.h> #else #ifdef HAVE_SYS_TIME_H #include <sys/time.h> #else #include <time.h> #endif #endif main () { struct timeval time; struct timezone dummy; exit (gettimeofday (&time, &dummy)); }], emacs_cv_struct_timezone=yes, emacs_cv_struct_timezone=no, emacs_cv_struct_timezone=yes)], emacs_cv_struct_timezone=no)]) fi ok_so_far=yes AC_CHECK_FUNC(socket, , ok_so_far=no) if test $ok_so_far = yes; then AC_CHECK_HEADER(netinet/in.h, , ok_so_far=no) fi if test $ok_so_far = yes; then AC_CHECK_HEADER(arpa/inet.h, , ok_so_far=no) fi if test $ok_so_far = yes; then AC_DEFINE(HAVE_INET_SOCKETS) fi if test -f /usr/lpp/X11/bin/smt.exp; then AC_DEFINE(HAVE_AIX_SMT_EXP) fi AC_MSG_CHECKING(whether system supports dynamic ptys) if test -d /dev/pts && ls -d /dev/ptmx > /dev/null 2>&1 ; then AC_MSG_RESULT(yes) AC_DEFINE(HAVE_DEV_PTMX) else AC_MSG_RESULT(no) fi AC_FUNC_FORK # Fixme: This should be replaced when we have autoconf 2.14. AC_SIZE_T # Set up the CFLAGS for real compilation, so we can substitute it. CFLAGS="$REAL_CFLAGS" CPPFLAGS="$REAL_CPPFLAGS" changequote(, )dnl #### Find out which version of Emacs this is. version=`grep 'defconst[ ]*emacs-version' ${srcdir}/lisp/version.el \ | sed -e 's/^[^"]*"\([^"]*\)".*$/\1/'` changequote([, ])dnl if test x"${version}" = x; then AC_MSG_ERROR(can't find current emacs version in \`${srcdir}/lisp/version.el'.) fi ### Specify what sort of things we'll be editing into Makefile and config.h. ### Use configuration here uncanonicalized to avoid exceeding size limits. AC_SUBST(version) AC_SUBST(configuration) AC_SUBST(canonical) AC_SUBST(srcdir) AC_SUBST(prefix) AC_SUBST(exec_prefix) AC_SUBST(bindir) AC_SUBST(datadir) AC_SUBST(sharedstatedir) AC_SUBST(libexecdir) AC_SUBST(mandir) AC_SUBST(infodir) AC_SUBST(lispdir) AC_SUBST(locallisppath) AC_SUBST(lisppath) AC_SUBST(x_default_search_path) AC_SUBST(etcdir) AC_SUBST(archlibdir) AC_SUBST(docdir) AC_SUBST(bitmapdir) AC_SUBST(c_switch_system) AC_SUBST(c_switch_machine) AC_SUBST(LD_SWITCH_X_SITE) AC_SUBST(LD_SWITCH_X_SITE_AUX) AC_SUBST(C_SWITCH_X_SITE) AC_SUBST(CFLAGS) AC_SUBST(X_TOOLKIT_TYPE) AC_SUBST(machfile) AC_SUBST(opsysfile) AC_SUBST(GETLOADAVG_LIBS) AC_DEFINE_UNQUOTED(EMACS_CONFIGURATION, "${canonical}") AC_DEFINE_UNQUOTED(EMACS_CONFIG_OPTIONS, "${ac_configure_args}") AC_DEFINE_UNQUOTED(config_machfile, "${machfile}") AC_DEFINE_UNQUOTED(config_opsysfile, "${opsysfile}") AC_DEFINE_UNQUOTED(LD_SWITCH_X_SITE, ${LD_SWITCH_X_SITE}) AC_DEFINE_UNQUOTED(LD_SWITCH_X_SITE_AUX, ${LD_SWITCH_X_SITE_AUX}) AC_DEFINE_UNQUOTED(C_SWITCH_X_SITE, ${C_SWITCH_X_SITE}) AC_DEFINE_UNQUOTED(UNEXEC_SRC, ${UNEXEC_SRC}) if test "${HAVE_X_WINDOWS}" = "yes" ; then AC_DEFINE(HAVE_X_WINDOWS) fi if test "${USE_X_TOOLKIT}" != "none" ; then AC_DEFINE(USE_X_TOOLKIT) fi if test "${HAVE_X11}" = "yes" ; then AC_DEFINE(HAVE_X11) fi if test "${HAVE_XFREE386}" = "yes" ; then AC_DEFINE(HAVE_XFREE386) fi if test "${HAVE_MENUS}" = "yes" ; then AC_DEFINE(HAVE_MENUS) fi if test "${GNU_MALLOC}" = "yes" ; then AC_DEFINE(GNU_MALLOC) fi if test "${REL_ALLOC}" = "yes" ; then AC_DEFINE(REL_ALLOC) fi AC_CHECK_HEADERS(nlist.h, [AC_DEFINE(NLIST_STRUCT, 1, [Define if you have <nlist.h>.])]) #### Report on what we decided to do. echo " Configured for \`${canonical}'. Where should the build process find the source code? ${srcdir} What operating system and machine description files should Emacs use? \`${opsysfile}' and \`${machfile}' What compiler should emacs be built with? ${CC} ${CFLAGS} Should Emacs use the GNU version of malloc? ${GNU_MALLOC}${GNU_MALLOC_reason} Should Emacs use a relocating allocator for buffers? ${REL_ALLOC} Should Emacs use mmap(2) for buffer allocation? $use_mmap_for_buffers What window system should Emacs use? ${window_system} What toolkit should Emacs use? ${USE_X_TOOLKIT}" if test -n "${x_includes}"; then echo " Where do we find X Windows header files? ${x_includes}" else echo " Where do we find X Windows header files? Standard dirs" fi if test -n "${x_libraries}"; then echo " Where do we find X Windows libraries? ${x_libraries}" else echo " Where do we find X Windows libraries? Standard dirs" fi echo " Does Emacs use -lXaw3d? ${HAVE_XAW3D}" echo " Does Emacs use -lXpm? ${HAVE_XPM}" echo " Does Emacs use -ljpeg? ${HAVE_JPEG}" echo " Does Emacs use -ltiff? ${HAVE_TIFF}" echo " Does Emacs use -lungif? ${HAVE_GIF}" echo " Does Emacs use -lpng? ${HAVE_PNG}" echo " Does Emacs use X toolkit scroll bars? ${USE_TOOLKIT_SCROLL_BARS}" echo # Remove any trailing slashes in these variables. changequote(, )dnl test "${prefix}" != NONE && prefix=`echo "${prefix}" | sed 's,\([^/]\)/*$,\1,'` test "${exec_prefix}" != NONE && exec_prefix=`echo "${exec_prefix}" | sed 's,\([^/]\)/*$,\1,'` changequote([, ])dnl ## Check if the C preprocessor will convert `..' to `. .'. If so, set ## CPP_NEED_TRADITIONAL to `yes' so that the code to generate Makefile ## from Makefile.c can correctly provide the arg `-traditional' to the ## C preprocessor. AC_EGREP_CPP(yes..yes, [yes..yes], CPP_NEED_TRADITIONAL=no, CPP_NEED_TRADITIONAL=yes) AC_OUTPUT(Makefile lib-src/Makefile.c:lib-src/Makefile.in oldXMenu/Makefile \ man/Makefile lwlib/Makefile src/Makefile.c:src/Makefile.in \ lisp/Makefile lispref/Makefile lispintro/Makefile leim/Makefile, [ ### Make the necessary directories, if they don't exist. for dir in etc lisp ; do test -d ${dir} || mkdir ${dir} done # Build src/Makefile from ${srcdir}/src/Makefile.c # and lib-src/Makefile from ${srcdir}/lib-src/Makefile.c # This must be done after src/config.h is built, since we rely on that file. changequote(, )dnl The horror, the horror. # Now get this: Some word that is part of the ${srcdir} directory name # or the ${configuration} value might, just might, happen to be an # identifier like `sun4' or `i386' or something, and be predefined by # the C preprocessor to some helpful value like 1, or maybe the empty # string. Needless to say consequent macro substitutions are less # than conducive to the makefile finding the correct directory. undefs="`echo $top_srcdir $configuration $canonical | sed -e 's/[^a-zA-Z0-9_]/ /g' -e 's/^/ /' -e 's/ *$//' \ -e 's/ */ -U/g' -e 's/-U[0-9][^ ]*//g' \ `" changequote([, ])dnl echo creating src/epaths.h ${MAKE-make} epaths-force # As of 2000-11-19, newest development versions of GNU cpp preprocess # `..' to `. .' unless invoked with -traditional if test "x$GCC" = xyes && test "x$CPP_NEED_TRADITIONAL" = xyes; then CPPFLAGS="$CPPFLAGS -traditional" fi echo creating lib-src/Makefile ( cd lib-src rm -f junk.c junk1.c junk2.c sed -e '/start of cpp stuff/q' \ < Makefile.c > junk1.c sed -e '1,/start of cpp stuff/d'\ -e 's,/\*\*/#\(.*\)$,/* \1 */,' \ < Makefile.c > junk.c $CPP $undefs -I. -I$srcdir/src $CPPFLAGS junk.c | \ sed -e 's/^ / /' -e '/^#/d' -e '/^[ ]*$/d' > junk2.c cat junk1.c junk2.c > Makefile.new rm -f junk.c junk1.c junk2.c chmod 444 Makefile.new mv -f Makefile.new Makefile ) echo creating src/Makefile ( cd src rm -f junk.c junk1.c junk2.c sed -e '/start of cpp stuff/q' \ < Makefile.c > junk1.c sed -e '1,/start of cpp stuff/d'\ -e 's,/\*\*/#\(.*\)$,/* \1 */,' \ < Makefile.c > junk.c $CPP $undefs -I. -I$srcdir/src $CPPFLAGS junk.c | \ sed -e 's/^ / /' -e '/^#/d' -e '/^[ ]*$/d' > junk2.c cat junk1.c junk2.c > Makefile.new rm -f junk.c junk1.c junk2.c chmod 444 Makefile.new mv -f Makefile.new Makefile ) if test ! -f src/.gdbinit && test -f $srcdir/src/.gdbinit; then echo creating src/.gdbinit echo source $srcdir/src/.gdbinit > src/.gdbinit fi # This is how we know whether to re-run configure in certain cases. touch src/config.stamp ], [GCC="$GCC" NON_GNU_CPP="$NON_GNU_CPP" CPP="$CPP" CPP_NEED_TRADITIONAL="$CPP_NEED_TRADITIONAL" CPPFLAGS="$CPPFLAGS"])