view config.guess @ 15097:32c26cb9e078

(Fexpand_file_name, Ffile_name_absolute_p): Doc fixes. (Ffile_exists_p, Ffile_executable_p, Ffile_readable_p) (Ffile_writable_p, Ffile_directory_p, Ffile_regular_p) (Ffile_modes, Fset_file_modes, Ffile_newer_than_file_p) (expand_and_dir_to_file): Rename abspath to absname. (CORRECT_DIR_SEPS) [DOS_NT]: New macro. (IS_DRIVE) [DOS_NT]: Added separate definitions for DOS and NT. (Ffile_name_directory) [DOS_NT]: Simplify code to match change in getdefdir in msdos.c. Ignore embedded colons. Correct dir seps. (Ffile_name_nondirectory) [DOS_NT]: Ignore embedded colons. Correct IS_ANY_SEP to IS_DIRECTORY_SEP. (file_name_as_directory) [DOS_NT]: Correct dir seps. Correct IS_ANY_SEP to IS_DIRECTORY_SEP. (directory_file_name) [DOS_NT]: Correct dir seps. (Fmake_temp_name) [DOS_NT: Correct dir seps. (Fexpand_file_name) [mostly DOS_NT]: Remove relpath, tmp and defdir variables; init drive to 0. Correctly detect when default_directory is absolute. Be strict when looking for MSDOS drive specifier; defer calling getdefdir. Ignore drive specifier if name now has UNC prefix. Correctly recognise if name is not absolute when trying simple method to expand; return original string if possible. Skip dir sep after ~ or ~user. Use getpwnam instead of HOME for ~user on NT. Handle error return from getdefdir. Correctly detect if newdir is absolute before using default_directory. Handle case where newdir is not absolute - expand relative to current working dir if necessary (instead of calling getdisk later). Only keep UNC prefix if nm starts with dir sep. Replace kludgy handling of drive spec in newdir. Correct dir seps. (Fexpand_file_name) [!DOS_NT]: Fix incorrect expansion of "/foo/../bar" -> "//bar". (Fsubstitute_in_file_name) [DOS_NT]: Correct dir seps for NT as well. Merge equivalent #ifdef APOLLO and WINDOWSNT cases. Ignore embedded colons and be strict about drive specs. (Fcopy_file) [DOS_NT]: Do dev/inode check on NT. (Ffile_name_absolute_p) [DOS_NT]: Be strict about drive specs. (check_executable) [DOS_NT]: Test st_mode on NT. (Ffile_readable_p) [DOS_NT]: Use access instead of open on NT. (Ffile_modes) [DOS_NT]: Don't embelish st_mode value on NT. (Fread_file_name) [DOS_NT]: Correct dir seps in HOME. (syms_of_fileio): Add Vdirectory_sep_char.

#! /bin/sh
# Attempt to guess a canonical system name.
#   Copyright (C) 1992, 93, 94, 95, 1996 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.

# Written by Per Bothner <[e-mail]>.
# The master version of this file is at the FSF in /home/gd/gnu/lib.
#
# This script attempts to guess a canonical system name similar to
# config.sub.  If it succeeds, it prints the system name on stdout, and
# exits with 0.  Otherwise, it exits with 1.
#
# The plan is that this can be called by configure scripts if you
# don't specify an explicit system type (host/target name).
#
# Only a few systems have been added to this list; please add others
# (but try to keep the structure clean).
#

# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
# ([e-mail] 8/24/94.)
if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
	PATH=$PATH:/.attbin ; export PATH
fi

UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown

trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15

# Note: order is significant - the case branches are not exclusive.

case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
    alpha:OSF1:*:*)
	# A Vn.n version is a released version.
	# A Tn.n version is a released field test version.
	# A Xn.n version is an unreleased experimental baselevel.
	# 1.2 uses "1.2" for uname -r.
	echo alpha-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//'`
	exit 0 ;;
    21064:Windows_NT:50:3)
	echo alpha-dec-winnt3.5
	exit 0 ;;
    Amiga*:UNIX_System_V:4.0:*)
	echo m68k-cbm-sysv4
	exit 0;;
    amiga:NetBSD:*:*)
      echo m68k-cbm-netbsd${UNAME_RELEASE}
      exit 0 ;;
    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
	echo arm-acorn-riscix${UNAME_RELEASE}
	exit 0;;
    Pyramid*:OSx*:*:*)
	if test "`(/bin/universe) 2>/dev/null`" = att ; then
		echo pyramid-pyramid-sysv3
	else
		echo pyramid-pyramid-bsd
	fi
	exit 0 ;;
    sun4*:SunOS:5.*:*)
	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
	exit 0 ;;
    i86pc:SunOS:5.*:*)
	echo i386-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
	exit 0 ;;
    sun4*:SunOS:6*:*)
	# According to config.sub, this is the proper way to canonicalize
	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
	# it's likely to be more like Solaris than SunOS4.
	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
	exit 0 ;;
    sun4*:SunOS:*:*)
	case "`/usr/bin/arch -k`" in
	    Series*|S4*)
		UNAME_RELEASE=`uname -v`
		;;
	esac
	# Japanese Language versions have a version number like `4.1.3-JL'.
	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
	exit 0 ;;
    sun3*:SunOS:*:*)
	echo m68k-sun-sunos${UNAME_RELEASE}
	exit 0 ;;
    atari*:NetBSD:*:*)
	echo m68k-atari-netbsd${UNAME_RELEASE}
	exit 0 ;;
    sun3*:NetBSD:*:*)
	echo m68k-sun-netbsd${UNAME_RELEASE}
	exit 0 ;;
    mac68k:NetBSD:*:*)
	echo m68k-apple-netbsd${UNAME_RELEASE}
	exit 0 ;;
    RISC*:ULTRIX:*:*)
	echo mips-dec-ultrix${UNAME_RELEASE}
	exit 0 ;;
    VAX*:ULTRIX*:*:*)
	echo vax-dec-ultrix${UNAME_RELEASE}
	exit 0 ;;
    mips:*:4*:UMIPS)
	echo mips-mips-riscos4sysv
	exit 0 ;;
    mips:*:5*:RISCos)
	echo mips-mips-riscos${UNAME_RELEASE}
	exit 0 ;;
    Night_Hawk:Power_UNIX:*:*)
	echo powerpc-harris-powerunix
	exit 0 ;;
    m88k:CX/UX:7*:*)
	echo m88k-harris-cxux7
	exit 0 ;;
    m88k:*:4*:R4*)
	echo m88k-motorola-sysv4
	exit 0 ;;
    m88k:*:3*:R3*)
	echo m88k-motorola-sysv3
	exit 0 ;;
    AViiON:dgux:*:*)
        # DG/UX returns AViiON for all architectures
        UNAME_PROCESSOR=`/usr/bin/uname -p`
        if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88100 ] ; then
	if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \
	     -o ${TARGET_BINARY_INTERFACE}x = x ] ; then
		echo m88k-dg-dgux${UNAME_RELEASE}
	else
		echo m88k-dg-dguxbcs${UNAME_RELEASE}
	fi
        else echo i586-dg-dgux${UNAME_RELEASE}
        fi
 	exit 0 ;;
    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
	echo m88k-dolphin-sysv3
	exit 0 ;;
    M88*:*:R3*:*)
	# Delta 88k system running SVR3
	echo m88k-motorola-sysv3
	exit 0 ;;
    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
	echo m88k-tektronix-sysv3
	exit 0 ;;
    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
	echo m68k-tektronix-bsd
	exit 0 ;;
    *:IRIX*:*:*)
	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
	exit 0 ;;
   ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
    i[34]86:AIX:*:*)
	echo i386-ibm-aix
	exit 0 ;;
    *:AIX:2:3)
	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
		sed 's/^		//' << EOF >dummy.c
		#include <sys/systemcfg.h>

		main()
			{
			if (!__power_pc())
				exit(1);
			puts("powerpc-ibm-aix3.2.5");
			exit(0);
			}
EOF
		${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
		rm -f dummy.c dummy
		echo rs6000-ibm-aix3.2.5
	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
		echo rs6000-ibm-aix3.2.4
	else
		echo rs6000-ibm-aix3.2
	fi
	exit 0 ;;
    *:AIX:*:4)
	if /usr/sbin/lsattr -EHl proc0 | grep POWER >/dev/null 2>&1; then
		IBM_ARCH=rs6000
	else
		IBM_ARCH=powerpc
	fi
	if [ -x /usr/bin/oslevel ] ; then
		IBM_REV=`/usr/bin/oslevel`
	else
		IBM_REV=4.${UNAME_RELEASE}
	fi
	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
	exit 0 ;;
    *:AIX:*:*)
	echo rs6000-ibm-aix
	exit 0 ;;
    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
	echo romp-ibm-bsd4.4
	exit 0 ;;
    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC NetBSD and
	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to 
	exit 0 ;;                           # report: romp-ibm BSD 4.3
    *:BOSX:*:*)
	echo rs6000-bull-bosx
	exit 0 ;;
    DPX/2?00:B.O.S.:*:*)
	echo m68k-bull-sysv3
	exit 0 ;;
    9000/[34]??:4.3bsd:1.*:*)
	echo m68k-hp-bsd
	exit 0 ;;
    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
	echo m68k-hp-bsd4.4
	exit 0 ;;
    9000/[3478]??:HP-UX:*:*)
	case "${UNAME_MACHINE}" in
	    9000/31? )            HP_ARCH=m68000 ;;
	    9000/[34]?? )         HP_ARCH=m68k ;;
	    9000/7?? | 9000/8?[679] ) HP_ARCH=hppa1.1 ;;
	    9000/8?? )            HP_ARCH=hppa1.0 ;;
	esac
	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
	exit 0 ;;
    3050*:HI-UX:*:*)
	sed 's/^	//' << EOF >dummy.c
	#include <unistd.h>
	int
	main ()
	{
	  long cpu = sysconf (_SC_CPU_VERSION);
	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
	     results, however.  */
	  if (CPU_IS_PA_RISC (cpu))
	    {
	      switch (cpu)
		{
		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
		  default: puts ("hppa-hitachi-hiuxwe2"); break;
		}
	    }
	  else if (CPU_IS_HP_MC68K (cpu))
	    puts ("m68k-hitachi-hiuxwe2");
	  else puts ("unknown-hitachi-hiuxwe2");
	  exit (0);
	}
EOF
	${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
	rm -f dummy.c dummy
	echo unknown-hitachi-hiuxwe2
	exit 0 ;;
    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
	echo hppa1.1-hp-bsd
	exit 0 ;;
    9000/8??:4.3bsd:*:*)
	echo hppa1.0-hp-bsd
	exit 0 ;;
    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
	echo hppa1.1-hp-osf
	exit 0 ;;
    hp8??:OSF1:*:*)
	echo hppa1.0-hp-osf
	exit 0 ;;
    parisc*:Lites*:*:*)
	echo hppa1.1-hp-lites
	exit 0 ;;
    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
	echo c1-convex-bsd
        exit 0 ;;
    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
	if getsysinfo -f scalar_acc
	then echo c32-convex-bsd
	else echo c2-convex-bsd
	fi
        exit 0 ;;
    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
	echo c34-convex-bsd
        exit 0 ;;
    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
	echo c38-convex-bsd
        exit 0 ;;
    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
	echo c4-convex-bsd
        exit 0 ;;
    CRAY*X-MP:*:*:*)
	echo xmp-cray-unicos
        exit 0 ;;
    CRAY*Y-MP:*:*:*)
	echo ymp-cray-unicos${UNAME_RELEASE}
	exit 0 ;;
    CRAY*C90:*:*:*)
	echo c90-cray-unicos${UNAME_RELEASE}
	exit 0 ;;
    CRAY-2:*:*:*)
	echo cray2-cray-unicos
        exit 0 ;;
    hp3[0-9][05]:NetBSD:*:*)
	echo m68k-hp-netbsd${UNAME_RELEASE}
	exit 0 ;;
    i[34]86:BSD/386:*:* | *:BSD/OS:*:*)
	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
	exit 0 ;;
    *:FreeBSD:*:*)
	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
	exit 0 ;;
    *:NetBSD:*:*)
	echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
	exit 0 ;;
    i*:CYGWIN*:*)
	echo i386-unknown-cygwin32
	exit 0 ;;
    p*:CYGWIN*:*)
	echo powerpcle-unknown-cygwin32
	exit 0 ;;
    prep*:SunOS:5.*:*)
	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
	exit 0 ;;
    *:GNU:*:*)
	echo `echo ${UNAME_MACHINE}|sed -e 's,/.*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
	exit 0 ;;
    *:Linux:*:*)
	# The BFD linker knows what the default object file format is, so
	# first see if it will tell us.
	ld_help_string=`ld --help 2>&1`
	if echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: elf_i[345]86"; then
	  echo "${UNAME_MACHINE}-unknown-linux" ; exit 0
	elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: i[345]86linux"; then
	  echo "${UNAME_MACHINE}-unknown-linuxaout" ; exit 0
	elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: i[345]86coff"; then
	  echo "${UNAME_MACHINE}-unknown-linuxcoff" ; exit 0
	elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: m68kelf"; then
	  echo "${UNAME_MACHINE}-unknown-linux" ; exit 0
	elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: m68klinux"; then
	  echo "${UNAME_MACHINE}-unknown-linuxaout" ; exit 0
	elif test "${UNAME_MACHINE}" = "alpha" ; then
	  echo alpha-unknown-linux ; exit 0
	else
	  # Either a pre-BFD a.out linker (linuxoldld) or one that does not give us
	  # useful --help.  Gcc wants to distinguish between linuxoldld and linuxaout.
	  test ! -d /usr/lib/ldscripts/. \
	    && echo "${UNAME_MACHINE}-unknown-linuxoldld" && exit 0
	  # Determine whether the default compiler is a.out or elf
	  cat >dummy.c <<EOF
main(argc, argv)
int argc;
char *argv[];
{
#ifdef __ELF__
  printf ("%s-unknown-linux\n", argv[1]);
#else
  printf ("%s-unknown-linuxaout\n", argv[1]);
#endif
  return 0;
}
EOF
	  ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
	  rm -f dummy.c dummy
	fi ;;
# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.  earlier versions
# are messed up and put the nodename in both sysname and nodename.
    i[34]86:DYNIX/ptx:4*:*)
	echo i386-sequent-sysv4
	exit 0 ;;
    i[34]86:*:4.*:* | i[34]86:SYSTEM_V:4.*:*)
	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
		echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE}
	else
		echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}
	fi
	exit 0 ;;
    i[34]86:*:3.2:*)
	if test -f /usr/options/cb.name; then
		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
		echo ${UNAME_MACHINE}-unknown-isc$UNAME_REL
	elif /bin/uname -X 2>/dev/null >/dev/null ; then
		UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
		(/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
		(/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
			&& UNAME_MACHINE=i586
		echo ${UNAME_MACHINE}-unknown-sco$UNAME_REL
	else
		echo ${UNAME_MACHINE}-unknown-sysv32
	fi
	exit 0 ;;
    Intel:Mach:3*:*)
	echo i386-unknown-mach3
	exit 0 ;;
    paragon:*:*:*)
	echo i860-intel-osf1
	exit 0 ;;
    i860:*:4.*:*) # i860-SVR4
	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
	else # Add other i860-SVR4 vendors below as they are discovered.
	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
	fi
	exit 0 ;;
    mini*:CTIX:SYS*5:*)
	# "miniframe"
	echo m68010-convergent-sysv
	exit 0 ;;
    M680[234]0:*:R3V[567]*:*)
	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
    3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0)
        uname -p 2>/dev/null | grep 86 >/dev/null \
          && echo i486-ncr-sysv4.3 && exit 0 ;;
    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
        uname -p 2>/dev/null | grep 86 >/dev/null \
          && echo i486-ncr-sysv4 && exit 0 ;;
    m680[234]0:LynxOS:2.[23]*:*)
	echo m68k-lynx-lynxos${UNAME_RELEASE}
	exit 0 ;;
    mc68030:UNIX_System_V:4.*:*)
	echo m68k-atari-sysv4
	exit 0 ;;
    i[34]86:LynxOS:2.[23]*:*)
	echo i386-lynx-lynxos${UNAME_RELEASE}
	exit 0 ;;
    TSUNAMI:LynxOS:2.[23]*:*)
	echo sparc-lynx-lynxos${UNAME_RELEASE}
	exit 0 ;;
    rs6000:LynxOS:2.[23]*:*)
	echo rs6000-lynx-lynxos${UNAME_RELEASE}
	exit 0 ;;
    RM*:SINIX-*:*:*)
	echo mips-sni-sysv4
	exit 0 ;;
    *:SINIX-*:*:*)
	if uname -p 2>/dev/null >/dev/null ; then
		UNAME_MACHINE=`(uname -p) 2>/dev/null`
		echo ${UNAME_MACHINE}-sni-sysv4
	else
		echo ns32k-sni-sysv
	fi
	exit 0 ;;
    mc68*:A/UX:*:*)
	echo m68k-apple-aux${UNAME_RELEASE}
	exit 0 ;;
    R3000:*System_V*:*:*)
	if [ -d /usr/nec ]; then
	        echo mips-nec-sysv${UNAME_RELEASE}
	else
	        echo mips-unknown-sysv${UNAME_RELEASE}
	fi
        exit 0 ;;
esac

#echo '(No uname command or uname output not recognized.)' 1>&2
#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2

cat >dummy.c <<EOF
#ifdef _SEQUENT_
# include <sys/types.h>
# include <sys/utsname.h>
#endif
main ()
{
#if defined (sony)
#if defined (MIPSEB)
  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
     I don't know....  */
  printf ("mips-sony-bsd\n"); exit (0);
#else
#include <sys/param.h>
  printf ("m68k-sony-newsos%s\n",
#ifdef NEWSOS4
          "4"
#else
	  ""
#endif
         ); exit (0);
#endif
#endif

#if defined (__arm) && defined (__acorn) && defined (__unix)
  printf ("arm-acorn-riscix"); exit (0);
#endif

#if defined (hp300) && !defined (hpux)
  printf ("m68k-hp-bsd\n"); exit (0);
#endif

#if defined (NeXT)
#if !defined (__ARCHITECTURE__)
#define __ARCHITECTURE__ "m68k"
#endif
  int version;
  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
  printf ("%s-next-nextstep%s\n", __ARCHITECTURE__,  version==2 ? "2" : "3");
  exit (0);
#endif

#if defined (MULTIMAX) || defined (n16)
#if defined (UMAXV)
  printf ("ns32k-encore-sysv\n"); exit (0);
#else
#if defined (CMU)
  printf ("ns32k-encore-mach\n"); exit (0);
#else
  printf ("ns32k-encore-bsd\n"); exit (0);
#endif
#endif
#endif

#if defined (__386BSD__)
  printf ("i386-unknown-bsd\n"); exit (0);
#endif

#if defined (sequent)
#if defined (i386)
  printf ("i386-sequent-dynix\n"); exit (0);
#endif
#if defined (ns32000)
  printf ("ns32k-sequent-dynix\n"); exit (0);
#endif
#endif

#if defined (_SEQUENT_)
    struct utsname un;

    uname(&un);

    if (strncmp(un.version, "V2", 2) == 0) {
	printf ("i386-sequent-ptx2\n"); exit (0);
    }
    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
	printf ("i386-sequent-ptx1\n"); exit (0);
    }
    printf ("i386-sequent-ptx\n"); exit (0);

#endif

#if defined (vax)
#if !defined (ultrix)
  printf ("vax-dec-bsd\n"); exit (0);
#else
  printf ("vax-dec-ultrix\n"); exit (0);
#endif
#endif

#if defined (alliant) && defined (i860)
  printf ("i860-alliant-bsd\n"); exit (0);
#endif

  exit (1);
}
EOF

${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy && rm dummy.c dummy && exit 0
rm -f dummy.c dummy

# Apollos put the system type in the environment.

test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }

# Convex versions that predate uname can use getsysinfo(1)

if [ -x /usr/convex/getsysinfo ]
then
    case `getsysinfo -f cpu_type` in
    c1*)
	echo c1-convex-bsd
	exit 0 ;;
    c2*)
	if getsysinfo -f scalar_acc
	then echo c32-convex-bsd
	else echo c2-convex-bsd
	fi
	exit 0 ;;
    c34*)
	echo c34-convex-bsd
	exit 0 ;;
    c38*)
	echo c38-convex-bsd
	exit 0 ;;
    c4*)
	echo c4-convex-bsd
	exit 0 ;;
    esac
fi

#echo '(Unable to guess system type)' 1>&2

exit 1