view install-sh @ 108750:3339da3cfeb3

Redesign bidi-aware edge positions of glyph rows, fix bug #6036. dispextern.h (struct glyph_row): New members minpos and maxpos. (MATRIX_ROW_START_CHARPOS, MATRIX_ROW_START_BYTEPOS) (MATRIX_ROW_END_CHARPOS, MATRIX_ROW_END_BYTEPOS): Reference minpos and maxpos members instead of start.pos and end.pos, respectively. xdisp.c (display_line): Compare IT_CHARPOS with the position in row->start.pos, rather than with MATRIX_ROW_START_CHARPOS. (cursor_row_p): Use row->end.pos rather than MATRIX_ROW_END_CHARPOS. (try_window_reusing_current_matrix, try_window_id): Use ROW->minpos rather than ROW->start.pos. (init_from_display_pos, init_iterator): Use EMACS_INT for character and byte positions. (find_row_edges): Renamed from find_row_end. Accept additional arguments for minimum and maximum buffer positions seen by display_line for this row. Don't use iterator to find the position following the maximum one; instead, increment the position found by display_line directly. Fix logic; eol_pos should be tested before the rest. Handle the case of characters delivered from display vector (bug#6036). Fix tests related to it->method. Handle the truncated_on_right_p rows. (RECORD_MAX_MIN_POS): New macro. (display_line): Use it to record the minimum and maximum buffer positions for glyphs in the row being assembled. Record the position of the newline that terminates the line. If word wrap is in effect, restore minimum and maximum positions seen up to the wrap point, when iterator returns to it. (try_window_reusing_current_matrix): Give up if in bidi-reordered row and cursor not already at point. Restore original pre-bidi code for unidirectional buffers. dispnew.c (increment_row_positions, check_matrix_invariants): Increment and check row->start.pos and row->end.pos, in addition to MATRIX_ROW_START_CHARPOS and MATRIX_ROW_END_CHARPOS. .gdbinit (prowlims): Display row->minpos and row->maxpos. Display truncated_on_left_p and truncated_on_right_p flags. Formatting fixes. (pmtxrows): Display the ordinal number of each row. Don't display rows beyond the last one. bidi.c (bidi_cache_iterator_state): Don't zero out new_paragraph: it is not copied by bidi_copy_it.

#! /bin/sh
#
# install - install a program, script, or datafile
# This comes from X11R5 (mit/util/scripts/install.sh).
#
# Copyright 1991 by the Massachusetts Institute of Technology
#
# Permission to use, copy, modify, distribute, and sell this software and its
# documentation for any purpose is hereby granted without fee, provided that
# the above copyright notice appear in all copies and that both that
# copyright notice and this permission notice appear in supporting
# documentation, and that the name of M.I.T. not be used in advertising or
# publicity pertaining to distribution of the software without specific,
# written prior permission.  M.I.T. makes no representations about the
# suitability of this software for any purpose.  It is provided "as is"
# without express or implied warranty.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.  It can only install one file at a time, a restriction
# shared with many OS's install programs.


# set DOITPROG to echo to test this script

# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"


# put in absolute paths if you don't have them in your path; or use env. vars.

mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"

transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""

while [ x"$1" != x ]; do
    case $1 in
	-c) instcmd="$cpprog"
	    shift
	    continue;;

	-d) dir_arg=true
	    shift
	    continue;;

	-m) chmodcmd="$chmodprog $2"
	    shift
	    shift
	    continue;;

	-o) chowncmd="$chownprog $2"
	    shift
	    shift
	    continue;;

	-g) chgrpcmd="$chgrpprog $2"
	    shift
	    shift
	    continue;;

	-s) stripcmd="$stripprog"
	    shift
	    continue;;

	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
	    shift
	    continue;;

	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
	    shift
	    continue;;

	*)  if [ x"$src" = x ]
	    then
		src=$1
	    else
		# this colon is to work around a 386BSD /bin/sh bug
		:
		dst=$1
	    fi
	    shift
	    continue;;
    esac
done

if [ x"$src" = x ]
then
	echo "install:	no input file specified"
	exit 1
else
	true
fi

if [ x"$dir_arg" != x ]; then
	dst=$src
	src=""

	if [ -d $dst ]; then
		instcmd=:
	else
		instcmd=mkdir
	fi
else

# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.

	if [ -f $src -o -d $src ]
	then
		true
	else
		echo "install:  $src does not exist"
		exit 1
	fi

	if [ x"$dst" = x ]
	then
		echo "install:	no destination specified"
		exit 1
	else
		true
	fi

# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic

	if [ -d $dst ]
	then
		dst="$dst"/`basename $src`
	else
		true
	fi
fi

## this sed command emulates the dirname command
dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`

# Make sure that the destination directory exists.
#  this part is taken from Noah Friedman's mkinstalldirs script

# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='
'
IFS="${IFS-${defaultIFS}}"

oIFS="${IFS}"
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS="${oIFS}"

pathcomp=''

while [ $# -ne 0 ] ; do
	pathcomp="${pathcomp}${1}"
	shift

	if [ ! -d "${pathcomp}" ] ;
        then
		$mkdirprog "${pathcomp}"
	else
		true
	fi

	pathcomp="${pathcomp}/"
done
fi

if [ x"$dir_arg" != x ]
then
	$doit $instcmd $dst &&

	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
else

# If we're going to rename the final executable, determine the name now.

	if [ x"$transformarg" = x ]
	then
		dstfile=`basename $dst`
	else
		dstfile=`basename $dst $transformbasename |
			sed $transformarg`$transformbasename
	fi

# don't allow the sed command to completely eliminate the filename

	if [ x"$dstfile" = x ]
	then
		dstfile=`basename $dst`
	else
		true
	fi

# Make a temp file name in the proper directory.

	dsttmp=$dstdir/#inst.$$#

# Move or copy the file name to the temp name

	$doit $instcmd $src $dsttmp &&

	trap "rm -f ${dsttmp}" 0 &&

# and set any options; do chmod last to preserve setuid bits

# If any of these fail, we abort the whole thing.  If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.

	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&

# Now rename the file to the real destination.

	$doit $rmcmd -f $dstdir/$dstfile &&
	$doit $mvcmd $dsttmp $dstdir/$dstfile

fi &&


exit 0