view lisp/icomplete.el @ 20489:35972a1f8f1b

(Vsignal_USR1_hook, Vsignal_USR2_hook): New variables. (syms_of_emacs): Set up Lisp variables. (handle_USR1_signal, handle_USR2_signal): New signal handlers. (main): Set up signal handlers.

;;;_. icomplete.el - minibuffer completion incremental feedback

;; Copyright (C) 1992, 1993, 1994, 1997 Free Software Foundation, Inc.

;; Author: Ken Manheimer <[e-mail]>
;; Maintainer: Ken Manheimer <[e-mail]>
;; Created: Mar 1993 [e-mail] - first release to usenet
;; Keywords: help, abbrev

;; This file is part of GNU Emacs.

;; GNU Emacs is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 2, or (at your option)
;; any later version.

;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs; see the file COPYING.  If not, write to the
;; Free Software Foundation, Inc., 59 Temple Place - Suite 330,
;; Boston, MA 02111-1307, USA.

;;; Commentary:

;; Loading this package implements a more fine-grained minibuffer
;; completion feedback scheme.  Prospective completions are concisely
;; indicated within the minibuffer itself, with each successive
;; keystroke.

;; See 'icomplete-completions' docstring for a description of the
;; icomplete display format.

;; See the `icomplete-minibuffer-setup-hook' docstring for a means to
;; customize icomplete setup for interoperation with other
;; minibuffer-oriented packages.

;; To activate icomplete mode, simply load the package.  You can
;; subsequently deactivate it by invoking the function icomplete-mode
;; with a negative prefix-arg (C-U -1 ESC-x icomplete-mode).  Also,
;; you can prevent activation of the mode during package load by
;; first setting the variable `icomplete-mode' to nil.  Icompletion
;; can be enabled any time after the package is loaded by invoking
;; icomplete-mode without a prefix arg.

;; This version of icomplete runs on Emacs 19.18 and later.  (It
;; depends on the incorporation of minibuffer-setup-hook.)  The elisp
;; archives, ftp://archive.cis.ohio-state.edu/pub/gnu/emacs/elisp-archive,
;; probably still has a version that works in GNU Emacs v18.

;; Thanks to everyone for their suggestions for refinements of this
;; package.  I particularly have to credit Michael Cook, who
;; implemented an incremental completion style in his 'iswitch'
;; functions that served as a model for icomplete.  Some other
;; contributors: Noah Freidman (restructuring as minor mode), Colin
;; Rafferty (lemacs reconciliation), Lars Lindberg, RMS, and others.

;; klm.

;;; Code:

;;;_* Provide
(provide 'icomplete)

;;;_* User Customization variables
(defvar icomplete-compute-delay .3
  "*Completions-computation stall, used only with large-number
completions - see `icomplete-delay-completions-threshold'.")
(defvar icomplete-delay-completions-threshold 400
  "*Pending-completions number over which to apply icomplete-compute-delay.")
(defvar icomplete-max-delay-chars 3
  "*Maximum number of initial chars to apply icomplete compute delay.")

;;;_* Initialization
;;;_  = icomplete-minibuffer-setup-hook
(defvar icomplete-minibuffer-setup-hook nil
  "*Icomplete-specific customization of minibuffer setup.

This hook is run during minibuffer setup iff icomplete will be active.
It is intended for use in customizing icomplete for interoperation
with other packages.  For instance:

  \(add-hook 'icomplete-minibuffer-setup-hook
	    \(function
	     \(lambda ()
	       \(make-local-variable 'resize-minibuffer-window-max-height)
	       \(setq resize-minibuffer-window-max-height 3))))

will constrain rsz-mini to a maximum minibuffer height of 3 lines when
icompletion is occurring.")

;;;_ + Internal Variables
;;;_  = icomplete-mode
(defvar icomplete-mode t
  "*Non-nil enables incremental minibuffer completion (see \\[icomplete-mode].")
;;;_  = icomplete-eoinput 1
(defvar icomplete-eoinput 1
  "Point where minibuffer input ends and completion info begins.")
(make-variable-buffer-local 'icomplete-eoinput)
;;;_  = icomplete-pre-command-hook
(defvar icomplete-pre-command-hook nil
  "Incremental-minibuffer-completion pre-command-hook.

Is run in minibuffer before user input when `icomplete-mode' is non-nil.
Use `icomplete-mode' function to set it up properly for incremental
minibuffer completion.")
(add-hook 'icomplete-pre-command-hook 'icomplete-tidy)
;;;_  = icomplete-post-command-hook
(defvar icomplete-post-command-hook nil
  "Incremental-minibuffer-completion post-command-hook.

Is run in minibuffer after user input when `icomplete-mode' is non-nil.
Use `icomplete-mode' function to set it up properly for incremental
minibuffer completion.")
(add-hook 'icomplete-post-command-hook 'icomplete-exhibit)

(defvar icomplete-show-key-bindings t
  "*When non-nil, show key bindings as well as completion for sole matches.")

(defun icomplete-get-keys (func-name)
  "Return strings naming keys bound to `func-name', or nil if none.
Examines the prior, not current, buffer, presuming that current buffer
is minibuffer."
  (if (commandp func-name)
    (save-excursion
      (let* ((sym (intern func-name))
	     (buf (other-buffer))
	     (map (save-excursion (set-buffer buf) (current-local-map)))
	     (keys (where-is-internal sym map)))
	(if keys
	    (concat "<"
		    (mapconcat 'key-description
			       (sort keys
				     #'(lambda (x y)
					 (< (length x) (length y))))
			       ", ")
		    ">"))))))

;;;_ > icomplete-mode (&optional prefix)
;;;###autoload
(defun icomplete-mode (&optional prefix)
  "Activate incremental minibuffer completion for this Emacs session.
Deactivates with negative universal argument."
  (interactive "p")
  (or prefix (setq prefix 0))
  (cond ((>= prefix 0)
	 (setq icomplete-mode t)
	 ;; The following is not really necessary after first time -
	 ;; no great loss.
	 (add-hook 'minibuffer-setup-hook 'icomplete-minibuffer-setup))
	(t (setq icomplete-mode nil))))

;;;_ > icomplete-simple-completing-p ()
(defun icomplete-simple-completing-p ()
  "Non-nil if current window is minibuffer that's doing simple completion.

Conditions are:
   the selected window is a minibuffer,
   and not in the middle of macro execution,
   and minibuffer-completion-table is not a symbol (which would
       indicate some non-standard, non-simple completion mechanism,
       like file-name and other custom-func completions)."

  (and (window-minibuffer-p (selected-window))
       (not executing-kbd-macro)
       (not (symbolp minibuffer-completion-table))))

;;;_ > icomplete-minibuffer-setup ()
;;;###autoload
(defun icomplete-minibuffer-setup ()
  "Run in minibuffer on activation to establish incremental completion.
Usually run by inclusion in `minibuffer-setup-hook'."
  (cond ((and icomplete-mode (icomplete-simple-completing-p))
	 (make-local-hook 'pre-command-hook)
	 (add-hook 'pre-command-hook
		   (function (lambda ()
			       (run-hooks 'icomplete-pre-command-hook)))
		   nil t)
	 (make-local-hook 'post-command-hook)
	 (add-hook 'post-command-hook
		   (function (lambda ()
			       (run-hooks 'icomplete-post-command-hook)))
		   nil t)
	 (run-hooks 'icomplete-minibuffer-setup-hook))))

;;;_* Completion

;;;_ > icomplete-tidy ()
(defun icomplete-tidy ()
  "Remove completions display \(if any) prior to new user input.
Should be run in on the minibuffer `pre-command-hook'.  See `icomplete-mode'
and `minibuffer-setup-hook'."
  (if (icomplete-simple-completing-p)
      (if (and (boundp 'icomplete-eoinput)
	       icomplete-eoinput)

	  (if (> icomplete-eoinput (point-max))
	      ;; Oops, got rug pulled out from under us - reinit:
	      (setq icomplete-eoinput (point-max))
	    (let ((buffer-undo-list buffer-undo-list )) ; prevent entry
	      (delete-region icomplete-eoinput (point-max))))

	;; Reestablish the local variable 'cause minibuffer-setup is weird:
	(make-local-variable 'icomplete-eoinput)
	(setq icomplete-eoinput 1))))

;;;_ > icomplete-exhibit ()
(defun icomplete-exhibit ()
  "Insert icomplete completions display.
Should be run via minibuffer `post-command-hook'.  See `icomplete-mode'
and `minibuffer-setup-hook'."
  (if (icomplete-simple-completing-p)
      (let ((contents (buffer-substring (point-min)(point-max)))
	    (buffer-undo-list t))
	(save-excursion
	  (goto-char (point-max))
                                        ; Register the end of input, so we
                                        ; know where the extra stuff
                                        ; (match-status info) begins:
	  (if (not (boundp 'icomplete-eoinput))
	      ;; In case it got wiped out by major mode business:
	      (make-local-variable 'icomplete-eoinput))
	  (setq icomplete-eoinput (point))
                                        ; Insert the match-status information:
	  (if (and (> (point-max) 1)
		   (or
		    ;; Don't bother with delay after certain number of chars:
		    (> (point-max) icomplete-max-delay-chars)
		    ;; Don't delay if alternatives number is small enough:
		    (if minibuffer-completion-table
			(cond ((numberp minibuffer-completion-table)
			       (< minibuffer-completion-table
				  icomplete-delay-completions-threshold))
			      ((sequencep minibuffer-completion-table)
			       (< (length minibuffer-completion-table)
				  icomplete-delay-completions-threshold))
			      ))
		    ;; Delay - give some grace time for next keystroke, before
		    ;; embarking on computing completions:
		    (sit-for icomplete-compute-delay)))
	      (insert-string
	       (icomplete-completions contents
				      minibuffer-completion-table
				      minibuffer-completion-predicate
				      (not
				       minibuffer-completion-confirm))))))))

;;;_ > icomplete-completions (name candidates predicate require-match)
(defun icomplete-completions (name candidates predicate require-match)
  "Identify prospective candidates for minibuffer completion.

The display is updated with each minibuffer keystroke during
minibuffer completion.

Prospective completion suffixes (if any) are displayed, bracketed by
one of \(), \[], or \{} pairs.  The choice of brackets is as follows:

  \(...) - a single prospect is identified and matching is enforced,
  \[...] - a single prospect is identified but matching is optional, or
  \{...} - multiple prospects, separated by commas, are indicated, and
          further input is required to distinguish a single one.

The displays for unambiguous matches have ` [Matched]' appended
\(whether complete or not), or ` \[No matches]', if no eligible
matches exist.  \(Keybindings for uniquely matched commands
are exhibited within the square braces.)"

  ;; 'all-completions' doesn't like empty
  ;; minibuffer-completion-table's (ie: (nil))
  (if (and (listp candidates) (null (car candidates)))
      (setq candidates nil))

  (let ((comps (all-completions name candidates predicate))
                                        ; "-determined" - only one candidate
        (open-bracket-determined (if require-match "(" "["))
        (close-bracket-determined (if require-match ")" "]"))
                                        ;"-prospects" - more than one candidate
        (open-bracket-prospects "{")
        (close-bracket-prospects "}")
        )
    (catch 'input
      (cond ((null comps) (format " %sNo matches%s"
				  open-bracket-determined
				  close-bracket-determined))
	    ((null (cdr comps))		;one match
	     (concat (if (and (> (length (car comps))
				 (length name)))
			 (concat open-bracket-determined
				 (substring (car comps) (length name))
				 close-bracket-determined)
		       "")
		     " [Matched"
		     (let ((keys (and icomplete-show-key-bindings
				      (commandp (intern-soft (car comps)))
				      (icomplete-get-keys (car comps)))))
		       (if keys
			   (concat "; " keys)
			 ""))
		     "]"))
	    (t				;multiple matches
	     (let* ((most
		     (try-completion name candidates
				     (and predicate
					  ;; Wrap predicate in impatience - ie,
					  ;; `throw' up when pending input is
					  ;; noticed.  Adds some overhead to
					  ;; predicate, but should be worth it.
					  (function
					   (lambda (item)
					     (if (input-pending-p)
						 (throw 'input "")
					       (apply predicate
						      item nil)))))))
		    (most-len (length most))
		    most-is-exact
		    (alternatives
		     (substring
		      (apply (function concat)
			     (mapcar (function
				      (lambda (com)
					(if (input-pending-p)
					    (throw 'input ""))
					(if (= (length com) most-len)
					    ;; Most is one exact match,
					    ;; note that and leave out
					    ;; for later indication:
					    (progn
					      (setq most-is-exact t)
					      ())
					  (concat ","
						  (substring com
							     most-len)))))
				     comps))
		      1)))
	       (concat (and (> most-len (length name))
			    (concat open-bracket-determined
				    (substring most (length name))
				    close-bracket-determined))
		       open-bracket-prospects
		       (if most-is-exact
			   ;; Add a ',' at the front to indicate "complete but
			   ;; not unique":
			   (concat "," alternatives)
			 alternatives)
		       close-bracket-prospects)))))))

;;;_* Local emacs vars.
;;;Local variables:
;;;outline-layout: (-2 :)
;;;End:

;;; icomplete.el ends here