Mercurial > emacs
view configure1.in @ 1644:35fbd349c58d
(add-change-log-entry): Expand file-name again after chasing links.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Fri, 27 Nov 1992 22:55:31 +0000 |
parents | b57feef74718 |
children | bd3afc204773 |
line wrap: on
line source
#!/bin/sh # Configuration script for GNU Emacs # Copyright (C) 1992 Free Software Foundation, Inc. #This file is part of GNU Emacs. #GNU Emacs is free software; you can redistribute it and/or modify #it under the terms of the GNU General Public License as published by #the Free Software Foundation; either version 1, or (at your option) #any later version. #GNU Emacs is distributed in the hope that it will be useful, #but WITHOUT ANY WARRANTY; without even the implied warranty of #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #GNU General Public License for more details. #You should have received a copy of the GNU General Public License #along with GNU Emacs; see the file COPYING. If not, write to #the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. # Shell script to edit files and make symlinks in preparation for # compiling Emacs. # # Usage: configure config_name # # If configure succeeds, it leaves its status in config.status. # If configure fails after disturbing the status quo, # config.status is removed. # # Remove any leading "." elements from the path name. If we don't # remove them, then another "./" will be prepended to the file name # each time we use config.status, and the program name will get larger # and larger. This wouldn't be a problem, except that since progname # gets recorded in all the Makefiles this script produces, # move-if-changed thinks they're different when they're not. # # It would be nice if we could put the ./ in a \( \) group and then # apply the * operator to that, so we remove as many leading ./././'s # as are present, but some seds (like Ultrix's sed) don't allow you to # apply * to a \( \) group. Bleah. progname="`echo $0 | sed 's:^\./::'`" short_usage="Type \`${progname} -usage' for more information about options." usage_message="Usage: ${progname} CONFIGURATION [-OPTION[=VALUE] ...] Set compilation and installation parameters for GNU Emacs, and report. CONFIGURATION specifies the machine and operating system to build for. For example: ${progname} sparc-sun-sunos4.1 configures Emacs to build on a Sun Sparc machine running SunOS 4.1, and ${progname} decstation configures Emacs to run on a DECstation running Ultrix. See \`etc/MACHINES'. Options are: --with-x, --with-x11 or --with-x10 - what window system to use; default is to use X11 if present. If you don't want X, specify \`--with-x=no'. -g, -O - Passed to the compiler. Default is -g, plus -O if using gcc. --prefix=DIR - where to install Emacs's library files --libdir=DIR - where to look for arch-dependent library files --datadir=DIR - where to look for architecture-independent library files --bindir=DIR - where to install the Emacs executable, and some friends --lisppath=PATH - colon-separated list of Emacs Lisp directories --lockdir=DIR - where Emacs should do its file-locking stuff If successful, ${progname} leaves its status in config.status. If unsuccessful after disturbing the status quo, config.status is removed." # These are omitted since users should not mess with them. # --gnu-malloc=[yes] or no - use the GNU memory allocator # --rel-alloc=[yes] or no - use compacting allocator for buffers # --lisp-float-type=[yes] or no - Support floating point in Emacs Lisp. # --window-system is omitted because --with... follow the conventions. if [ ! -r ./src/lisp.h ]; then echo "${progname}: Can't find Emacs sources in \`./src'. Run this config script in the top directory of the Emacs source tree." >&2 exit 1 fi # The option names defined here are actually the shell variable names. # They should have `_' in place of `-'. options=":\ usage:help:\ with_x:with_x11:with_x10:\ g:O:\ prefix:bindir:emacsdir:datadir:lispdir:locallisppath:\ lisppath:buildlisppath:statedir:lockdir:libdir:mandir:infodir:\ " boolean_opts=":\ g:O:with_x:with_x10:\ " config_h_opts=":\ have_x_windows:have_x11:have_x_menu:\ c_switch_site:sigtype:gnu_malloc:rel_alloc:lisp_float_type:\ " prefix= bindir=/usr/local/bin gnu_malloc=yes lisp_float_type=yes # The default values for the following options are guessed at after other # options have been checked and given values, so we set them to null here. lisppath="" datadir="" libdir="" lockdir="" window_system="" # Record all the arguments, so we can save them in config.status. arguments="$@" echo "Examining options." while [ $# != 0 ]; do arg="$1" case "${arg}" in -*) # Separate the switch name from the value it's being given. case "${arg}" in -*=*) opt=`echo ${arg} | sed 's:^-*\([^=]*\)=.*$:\1:'` val=`echo ${arg} | sed 's:^-*[^=]*=\(.*\)$:\1:'` valomitted=no ;; -*) # If FOO is a boolean argument, -FOO is equivalent to # -FOO=yes. Otherwise, the value comes from the next # argument - see below. opt=`echo ${arg} | sed 's:^-*\(.*\)$:\1:'` val="yes" valomitted=yes ;; esac # Also change `-' in the option name to `_'. opt="`echo ${opt} | tr - _`" # Make sure the argument is valid and unambiguous. case ${options} in *:${opt}:* ) # Exact match. optvar=${opt} ;; *:${opt}*:${opt}*:* ) # Ambiguous prefix. echo "\`-${opt}' is an ambiguous switch; it could be any of the following:" # We can't just use tr to translate colons to newlines, since # BSD sed and SYSV sed use different syntaxes for that. spaced_options=`echo ${options} | tr ':' ' '` echo `(for option in ${spaced_options}; do echo $option; done) \ | grep "^${opt}"` echo ${short_usage} exit 1 ;; *:${opt}*:* ) # Unambigous prefix. optvar=`echo ${options} | sed 's/^.*:\('${opt}'[^:]*\):.*$/\1/'` ;; * ) (echo "\`-${opt}' is not a valid option." echo "${short_usage}") | more exit 1 ;; esac case "${optvar}" in usage | help) echo "${usage_message}" | more exit 1 ;; esac # If the variable is supposed to be boolean, make sure the value # given is either "yes" or "no". If not, make sure some value # was given. case "${boolean_opts}" in *:${optvar}:* ) case "${val}" in y | ye | yes ) val=yes ;; n | no ) val=no ;; * ) echo "The \`-${optvar}' option (\`-${opt}') is supposed to have a boolean value - set it to either \`yes' or \`no'." >&2 exit 1 ;; esac ;; *) if [ "${valomitted}" = "yes" ]; then if [ $# = 1 ]; then (echo "${progname}: You must give a value for the \`-${opt}' option, as in \`-${opt}=FOO'." echo "${short_usage}") | more exit 1 fi shift; val="$1" fi ;; esac eval "${optvar}=\"${val}\"" ;; *) configuration=${arg} ;; esac shift done if [ "${configuration}" = "" ]; then (echo "You must specify a configuration name as an argument to ${progname}." echo "${short_usage}") | more exit 1 fi # Canonicalize the configuration name. echo "Checking the configuration name." if configuration=`./config.sub "${configuration}"` ; then : ; else exit $? fi # Given the canonicalized configuration name, set machfile and opsysfile to # the names of the m/*.h and s/*.h files we should use. ### You would hope that you could choose an m/*.h file pretty much ### based on the machine portion of the configuration name, and an s- ### file based on the operating system portion. However, it turns out ### that each m/*.h file is pretty manufacturer-specific - for ### example, apollo.h, hp9000s300.h, mega68k, news.h, and tad68k are ### all 68000 machines; mips.h, pmax.h, and news-risc are all MIPS ### machines. So we basically have to have a special case for each ### configuration name. ### As far as handling version numbers on operating systems is ### concerned, make sure things will fail in a fixable way. If ### /etc/MACHINES doesn't say anything about version numbers, be ### prepared to handle anything reasonably. If version numbers ### matter, be sure /etc/MACHINES says something about it. machine='' opsys='' unported='false' case "${configuration}" in ## Alliant machines ## Strictly speaking, we need the version of the alliant operating ## system to choose the right machine file, but currently the ## configuration name doesn't tell us enough to choose the right ## one; we need to give alliants their own operating system name to ## do this right. When someone cares, they can help us. fx80-alliant-* ) machine=alliant4 opsys=bsd4-2 ;; i860-alliant-* ) machine=alliant-2800 opsys=bsd4-3 ;; ## Altos 3068 m68*-altos-sysv* ) machine=altos opsys=usg5-2 ;; ## Amdahl UTS 580-amdahl-sysv* ) machine=amdahl opsys=usg5-2-2 ;; ## Appallings - I mean, Apollos - running Domain m68*-apollo* ) machine=apollo opsysfile=bsd4-2.h ;; ## AT&T 3b2, 3b5, 3b15, 3b20 we32k-att-sysv* ) machine=att3b opsys=usg5-2-2 ;; ## AT&T 3b1 - The Mighty Unix PC! m68*-att-sysv* ) machine=7300 opsys=usg5-2-2 ;; ## Bull sps7 m68*-bull-sysv* ) machine=sps7 opsys=usg5-2 ;; ## CCI 5/32, 6/32 -- see "Tahoe". ## Celerity ## I don't know what configuration name to use for this; config.sub ## doesn't seem to know anything about it. Hey, Celerity users, get ## in touch with us! celerity-celerity-bsd* ) machine=celerity opsys=bsd4-2 ;; ## Clipper ## What operating systems does this chip run that Emacs has been ## tested on? clipper-* ) machine=clipper ## We'll use the catch-all code at the bottom to guess the ## operating system. ;; ## Convex *-convex-bsd* ) machine=convex opsys=bsd4-3 ;; ## Cubix QBx/386 i386-cubix-sysv* ) machine=intel386 opsys=usg5-3 ;; ## Cydra 5 cydra*-cydrome-sysv* ) machine=cydra5 opsys=usg5-3 ;; ## DECstations mips-dec-ultrix[0-3].* | mips-dec-ultrix4.0 | mips-dec-bsd4.2 ) machine=pmax opsys=bsd4-2 ;; mips-dec-ultrix* | mips-dec-bsd* ) machine=pmax opsys=bsd4-3 ;; mips-dec-osf* ) machine=pmax opsys=osf1 ;; ## Motorola Delta machines m68*-motorola-sysv* ) machine=delta opsys=usg5-3 ;; m88k-motorola-sysv* | m88k-motorola-m88kbcs* ) machine=delta88k opsys=usg5-3 ;; ## Dual machines m68*-dual-sysv* ) machine=dual opsys=usg5-2 ;; m68*-dual-uniplus* ) machine=dual opsys=unipl5-2 ;; ## Elxsi 6400 elxsi-elxsi-sysv* ) machine=elxsi opsys=usg5-2 ;; ## Encore machines ns16k-encore-bsd* ) machine=ns16000 opsys=umax ;; ## The GEC 93 - apparently, this port isn't really finished yet. ## Gould Power Node and NP1 pn-gould-bsd4.2 ) machine=gould opsys=bsd4-2 ;; pn-gould-bsd4.3 ) machine=gould opsys=bsd4-3 ;; np1-gould-bsd* ) machine=gould-np1 opsys=bsd4-3 ;; ## Honeywell XPS100 xps*-honeywell-sysv* ) machine=xps100 opsys=usg5-2 ;; ## HP 9000 series 200 or 300 m68*-hp-bsd* ) machine=hp9000s300 opsys=bsd4-3 ;; ## HP/UX 8 doesn't run on these machines, so use HP/UX 7. m68*-hp-hpux* ) machine=hp9000s300 opsys=hpux ;; ## HP 9000 series 800, running HP/UX hppa1.0-hp-hpux* ) machine=hp9000s800 opsys=hpux ;; ## Orion machines orion-orion-bsd* ) machine=orion opsys=bsd4-2 ;; clipper-orion-bsd* ) machine=orion105 opsys=bsd4-2 ;; ## IBM machines i386-ibm-aix1.1 ) machine=ibmps2-aix opsys=usg5-2-2 ;; i386-ibm-aix1.2 ) machine=ibmps2-aix opsys=usg5-3 ;; rs6000-ibm-aix* ) machine=ibmrs6000 opsys=aix3-1 ;; romp-ibm-bsd* ) machine=ibmrt opsys=bsd4-2 ;; romp-ibm-aix* ) machine=ibmrt-aix opsys=usg5-2-2 ;; ## Integrated Solutions `Optimum V' m68*-isi-bsd4.2 ) machine=isi-ov opsys=bsd4-2 ;; m68*-isi-bsd4.3 ) machine=isi-ov opsys=bsd4-3 ;; ## Intel 386 machines where we do care about the manufacturer i[34]86-intsys-sysv* ) machine=is386 opsys=usg5-2-2 ;; ## Intel 386 machines where we don't care about the manufacturer i[34]86-* ) machine=intel386 case "${configuration}" in *-isc1.* | *-isc2.[01]* ) opsys=386-ix ;; *-isc* ) opsys=isc2-2 ;; *-esix* ) opsys=esix ;; *-xenix* ) opsys=xenix ;; ## Otherwise, we'll fall through to the generic opsys code at the bottom. esac ;; ## Silicon Graphics machines ## Iris 2500 and Iris 2500 Turbo (aka the Iris 3030) m68*-sgi-iris3.5 ) machine=irist opsys=iris3-5 ;; m68*-sgi-iris3.6 | m68*-sgi-iris*) machine=irist opsys=iris3-6 ;; ## Iris 4D mips-sgi-irix3.* ) machine=iris4d opsys=irix3-3 ;; mips-sgi-irix4.* | mips-sgi-irix* ) machine=iris4d opsys=irix4-0 ;; ## Masscomp machines m68*-masscomp-rtu ) machine=masscomp opsys=rtu ;; ## Megatest machines m68*-megatest-bsd* ) machine=mega68 opsys=bsd4-2 ;; ## Workstations sold by MIPS ## This is not necessarily all workstations using the MIPS processor - ## Irises are produced by SGI, and DECstations by DEC. ## etc/MACHINES lists mips.h and mips4.h as possible machine files, ## and usg5-2-2 and bsd4-3 as possible OS files. The only guidance ## it gives for choosing between the alternatives seems to be "Use ## -machine=mips4 for RISCOS version 4; use -opsystem=bsd4-3 with ## the BSD world." I'll assume that these are instructions for ## handling two odd situations, and that every other situation ## should use mips.h and usg5-2-2, they being listed first. mips-mips-riscos4* ) machine=mips4 opsys=usg5-2-2 ;; mips-mips-bsd* ) machine=mips opsys=bsd4-3 ;; mips-mips-* ) machine=mips opsys=usg5-2-2 ;; ## The complete machine from National Semiconductor ns32k-ns-genix* ) machine=ns32000 opsys=usg5-2 ;; ## NCR machines m68*-ncr-sysv2* ) machine=tower32 opsys=usg5-2-2 ;; m68*-ncr-sysv3* ) machine=tower32v3 opsys=usg5-3 ;; ## Nixdorf Targon 31 m68*-nixdorf-sysv* ) machine=targon31 opsys=usg5-2-2 ;; ## Nu (TI or LMI) m68*-nu-sysv* ) machine=nu opsys=usg5-2 ;; ## Plexus m68*-plexus-sysv* ) machine=plexus opsys=usg5-2 ;; ## Prime EXL i386-prime-sysv* ) machine=i386 opsys=usg5-3 ;; ## Pyramid machines ## I don't really have any idea what sort of processor the Pyramid has, ## so I'm assuming it is its own architecture. pyramid-pyramid-bsd* ) machine=pyramid opsys=bsd4-2 ;; ## Sequent Balance ns32k-sequent-bsd4.2 ) machine=sequent opsys=bsd4-2 ;; ns32k-sequent-bsd4.3 ) machine=sequent opsys=bsd4-3 ;; ## Sequent Symmetry i386-sequent-bsd* ) machine=symmetry opsys=bsd4-3 ;; ## SONY machines m68*-sony-bsd4.2 ) machine=news opsys=bsd4-2 ;; m68*-sony-bsd4.3 ) machine=news opsys=bsd4-3 ;; mips-sony-bsd* ) machine=news-risc opsys=bsd4-3 ;; ## Stride m68*-stride-sysv* ) machine=stride opsys=usg5-2 ;; ## Suns *-sun-sunos* | *-sun-bsd* ) case "${configuration}" in m68*-sunos1* ) machine=sun1 ;; m68*-sunos2* ) machine=sun2 ;; m68* ) machine=sun3 ;; i[34]86* ) machine=sun386 ;; sparc* ) machine=sparc ;; * ) unported=true ;; esac case "${configuration}" in *-sunos4.0* ) opsys=sunos4-0 ;; *-sunos4* | *-sunos ) opsys=sunos4-1 ;; * ) opsys=bsd4-2 ;; esac ;; ## Tadpole 68k m68*-tadpole-sysv* ) machine=tad68k opsys=usg5-3 ;; ## Tahoe machines tahoe-tahoe-bsd4.2 ) machine=tahoe opsys=bsd4-2 ;; tahoe-tahoe-bsd4.3 ) machine=tahoe opsys=bsd4-3 ;; ## Tandem Integrity S2 mips-tandem-sysv* ) machine=tandem-s2 opsys=usg5-3 ;; ## Tektronix 16000 box (6130?) ns16k-tektronix-bsd* ) machine=ns16000 opsys=bsd4-2 ;; ## Tektronix 4300 ## src/m/tek4300.h hints that this is a m68k machine. m68*-tektronix-bsd* ) machine=tex4300 opsys=bsd4-3 ;; ## Titan P2 or P3 ## We seem to have lost the machine-description file titan.h! titan-titan-sysv* ) machine=titan opsys=usg5-3 ;; ## Ustation E30 (SS5E) m68*-unisys-uniplus* ) machine=ustation opsystem=unipl5-2 ;; ## Vaxen. vax-dec-* ) machine=vax case "${configuration}" in *-bsd4.1 ) opsys=bsd4-1 ;; *-bsd4.2 | *-ultrix[0-3].* | *-ultrix4.0 ) opsys=bsd4-2 ;; *-bsd4.3 | *-ultrix* ) opsys=bsd4-3 ;; *-sysv[01]* ) opsys=usg5-0 ;; *-sysv2* ) opsys=usg5-2 ;; *-vms* ) opsys=vms ;; * ) unported=true esac ;; ## Whitechapel MG1 ns16k-whitechapel-* ) machine=mg1 ## We don't know what sort of OS runs on these; we'll let the ## operating system guessing code below try. ;; ## Wicat m68*-wicat-sysv* ) machine=wicat opsys=usg5-2 ;; * ) unported=true ;; esac ### If the code above didn't choose an operating system, just choose ### an operating system based on the configuration name. You really ### only want to use this when you have no idea what the right ### operating system is; if you know what operating systems a machine ### runs, it's cleaner to make it explicit in the case statement ### above. if [ ! "${opsys}" ]; then case "${configuration}" in *-bsd4.[01] ) opsys=bsd4-1 ;; *-bsd4.2 ) opsys=bsd4-2 ;; *-bsd4.3 ) opsys=bsd4-3 ;; *-sysv0 ) opsys=usg5-0 ;; *-sysv2 ) opsys=usg5-2 ;; *-sysv2.2 ) opsys=usg5-2-2 ;; *-sysv3 ) opsys=usg5-3 ;; *-sysv4 ) opsys=usg5-4 ;; * ) unported=true ;; esac fi if $unported ; then (echo "${progname}: Emacs hasn't been ported to \`${configuration}' systems." echo "${progname}: Check \`etc/MACHINES' for recognized configuration names." ) >&2 exit 1 fi machfile="m/${machine}.h" opsysfile="s/${opsys}.h" if [ ! "${prefix}" ]; then prefix="/usr/local" fi if [ ! "${emacsdir}" ]; then emacsdir="${prefix}/emacs-19.0" fi if [ ! "${datadir}" ]; then datadir="${emacsdir}/etc" fi if [ ! "${lispdir}" ]; then lispdir="${emacsdir}/lisp" fi if [ ! "${locallisppath}" ]; then locallisppath="${emacsdir}/local-lisp" fi if [ ! "${lisppath}" ]; then lisppath="${locallisppath}:${lispdir}" fi if [ ! "${buildlisppath}" ]; then buildlisppath=../lisp fi if [ ! "${statedir}" ]; then statedir="${emacsdir}" fi if [ ! "${lockdir}" ]; then lockdir="${statedir}/lock" fi if [ "${libdir}" = "" ]; then libdir="${emacsdir}/arch-lib" fi if [ ! "${mandir}" ]; then mandir="/usr/man/man1" fi if [ ! "${infodir}" ]; then infodir="${prefix}/info" fi echo "Checking window system." window_system='' case "${with_x}" in yes ) window_system=${window_system}x11 ;; no ) window_system=${window_system}none esac case "${with_x11}" in yes ) window_system=${window_system}x11 ;; esac case "${with_x10}" in yes ) window_system=${window_system}x10 ;; esac case "${window_system}" in "none" | "x11" | "x10" ) ;; "" ) echo " No window system specifed. Looking for X Windows." window_system=none if [ -r /usr/lib/libX11.a -o -d /usr/include/X11 ]; then window_system=x11 fi ;; * ) echo "Don\'t specify the window system more than once." >&2 exit 1 ;; esac case "${window_system}" in x11 ) have_x_windows=yes have_x11=yes echo " Using X11." ;; x10 ) have_x_windows=yes have_x11=no echo " Using X10." ;; none ) have_x_windows=no have_x11=no echo " Using no window system." ;; esac # If we're using X11, we should use the X menu package. have_x_menu=no case ${have_x11} in yes ) have_x_menu=yes ;; esac echo "Checking for GCC." temppath=`echo $PATH | sed 's/^:/.:/ s/::/:.:/g s/:$/:./ s/:/ /g'` cc=`( for dir in ${temppath}; do if [ -f ${dir}/gcc ]; then echo gcc; exit 0; fi done echo cc )` case "${cc}" in "gcc" ) echo " Using GCC." # With GCC, both O and g should default to yes, no matter what # the other is. case "${O},${g}" in , ) O=yes; g=yes ;; ,* ) O=yes; ;; *, ) g=yes ;; esac ;; "*" ) echo " Using the system's CC." # With other compilers, treat them as mutually exclusive, # defaulting to debug. case "${O},${g}" in , ) O=no ; g=yes ;; ,no ) O=yes; ;; ,yes ) O=no ; ;; no, ) g=yes ;; yes, ) g=no ;; esac ;; esac # What is the return type of a signal handler? We run # /usr/include/signal.h through cpp and grep for the declaration of # the signal function. Yuck. echo "Looking for return type of signal handler functions." signal_h_file='' if [ -r /usr/include/signal.h ]; then signal_h_file=/usr/include/signal.h elif [ -r /usr/include/sys/signal.h ]; then signal_h_file=/usr/include/sys/signal.h fi sigtype=void if [ "${signal_h_file}" ]; then sigpattern='[ ]*([ ]*\*[ ]*signal[ ]*(' # We make a copy whose name ends in .c, so the compiler # won't complain about having only been given a .h file. tempcname="configure.tmp.$$.c" cp ${signal_h_file} ${tempcname} if ${cc} -E ${tempcname} | grep "int${sigpattern}" > /dev/null; then sigtype=int fi rm -f ${tempcname} fi echo " Guessing that signals return \`${sigtype}'." echo "Examining the machine- and system-dependent files to find out" echo " - which libraries the lib-src programs will want, and" echo " - whether the GNU malloc routines are usable." tempcname="configure.tmp.$$.c" echo '#include "src/'${opsysfile}'" #include "src/'${machfile}'" #ifndef LIBS_MACHINE #define LIBS_MACHINE #endif #ifndef LIBS_SYSTEM #define LIBS_SYSTEM #endif @configure@ libsrc_libs=LIBS_MACHINE LIBS_SYSTEM #ifdef SYSTEM_MALLOC @configure@ system_malloc=yes #else @configure@ system_malloc=no #endif ' > ${tempcname} eval `${cc} -E ${tempcname} \ | grep '@configure@' \ | sed -e 's/^@configure@//'` rm ${tempcname} # Do the opsystem or machine files prohibit the use of the GNU malloc? if [ "${system_malloc}" = "yes" ]; then gnu_malloc=no gnu_malloc_reason=" (The GNU allocators don't work with this system configuration.)" fi if [ ! "${rel_alloc}" ]; then rel_alloc=${gnu_malloc} fi rm -f config.status set -e # Make the proper settings in the config file. echo "Making src/config.h from src/config.h.in" case "${g}" in "yes" ) c_switch_site="${c_switch_site} -g" ;; esac case "${O}" in "yes" ) c_switch_site="${c_switch_site} -O" ;; esac sed_flags="-e 's:@machine@:${machfile}:'" sed_flags="${sed_flags} -e 's:@opsystem@:${opsysfile}:'" for flag in `echo ${config_h_opts} | tr ':' ' '`; do # Note that SYSV `tr' doesn't handle character ranges. cflagname=`echo ${flag} \ | tr abcdefghijklmnopqrstuvwxyz ABCDEFGHIJKLMNOPQRSTUVWXYZ` val=`eval echo '$'${flag}` case ${val} in no | "") f="-e 's:.*#define ${cflagname}.*:/\\* #define ${cflagname} \\*/:'" ;; yes) f="-e 's:.*#define ${cflagname}.*:#define ${cflagname}:'" ;; *) f="-e 's:.*#define ${cflagname}.*:#define ${cflagname} ${val}:'" ;; esac sed_flags="${sed_flags} ${f}" done rm -f src/config.h.tmp eval '/bin/sed '${sed_flags}' < src/config.h.in > src/config.h.tmp' ./move-if-change src/config.h.tmp src/config.h # Remind people not to edit this. chmod -w src/config.h # Modify the parameters in the top makefile. echo "Producing ./Makefile from ./Makefile.in." rm -f Makefile.tmp (echo "# This file is generated by \`${progname}' from \`./Makefile.in'. # If you are thinking about editing it, you should seriously consider # editing \`./Makefile.in' itself, or running \`${progname}' instead." /bin/sed < Makefile.in \ -e '/^# DIST: /d' \ -e 's;^\(prefix=\).*$;\1'"${prefix};" \ -e 's;^\(bindir=\).*$;\1'"${bindir};" \ -e 's;^\(emacsdir=\).*$;\1'"${emacsdir};" \ -e 's;^\(datadir=\).*$;\1'"${datadir};" \ -e 's;^\(lispdir=\).*$;\1'"${lispdir};" \ -e 's;^\(locallisppath=\).*$;\1'"${locallisppath};" \ -e 's;^\(lisppath=\).*$;\1'"${lisppath};" \ -e 's;^\(buildlisppath=\).*$;\1'"${buildlisppath};" \ -e 's;^\(statedir=\).*$;\1'"${statedir};" \ -e 's;^\(lockdir=\).*$;\1'"${lockdir};" \ -e 's;^\(libdir=\).*$;\1'"${libdir};" \ -e 's;^\(mandir=\).*$;\1'"${mandir};" \ -e 's;^\(infodir=\).*$;\1'"${infodir};" \ ) > ./Makefile.tmp ./move-if-change Makefile.tmp Makefile # Remind people not to edit this. chmod -w ./Makefile # Modify the parameters in the `build-install' script. echo "Producing ./build-install from ./build-install.in." rm -f ./build-install.tmp (echo "# This file is generated by \`${progname}' from \`./build-install.in'. # If you are thinking about editing it, you should seriously consider # editing \`./build-install.in' itself, or running \`${progname}' instead." /bin/sed < build-install.in \ -e 's;^\(prefix=\).*$;\1'"${prefix};" \ -e 's;^\(bindir=\).*$;\1'"${bindir};" \ -e 's;^\(lisppath=\).*$;\1'"${lisppath};" \ -e 's;^\(datadir=\).*$;\1'"${datadir};" \ -e 's;^\(lockdir=\).*$;\1'"${lockdir};" \ -e 's;^\(libdir=\).*$;\1'"${libdir};") > ./build-install.tmp ./move-if-change build-install.tmp build-install # Remind people not to edit this. chmod -w build-install chmod +x build-install # Modify the parameters in the src makefile. echo "Producing src/Makefile from src/Makefile.in." rm -f src/Makefile.tmp (echo "# This file is generated by \`${progname}' from \`Makefile.in'. # If you are thinking about editing it, you should seriously consider # editing \`Makefile.in' itself, or running \`${progname}' instead." /bin/sed < src/Makefile.in \ -e '/^# DIST: /d' \ -e 's;^\(CC[ ]*=\).*$;\1'"${cc};") > src/Makefile.tmp ./move-if-change src/Makefile.tmp src/Makefile # Remind people not to edit this. chmod -w src/Makefile # Modify the parameters in the lib-src makefile. echo "Producing lib-src/Makefile from lib-src/Makefile.in." rm -f lib-src/Makefile.tmp (echo "# This file is generated by \`${progname}' from \`Makefile.in'. # If you are thinking about editing it, you should seriously consider # editing \`Makefile.in' itself, or running \`${progname}' instead." /bin/sed < lib-src/Makefile.in \ -e '/^# DIST: /d' \ -e 's;^\(CONFIG_CFLAGS=\).*$;\1'"${c_switch_site};" \ -e 's;^\(LOADLIBES=\).*$;\1'"${libsrc_libs};" \ -e 's;^\(CC=\).*$;\1'"${cc};") > lib-src/Makefile.tmp ./move-if-change lib-src/Makefile.tmp lib-src/Makefile # Remind people not to edit this. chmod -w lib-src/Makefile # Create a verbal description of what we have done. message="Configured for \`${configuration}'. The following values have been set in ./Makefile and ./build-install: \`make install' or \`build-install' will place executables in ${bindir}. Emacs's lisp search path will be \`${lisppath}'. Emacs will look for its architecture-independent data in ${datadir}. Emacs will look for its utility programs and other architecture- dependent data in ${libdir}. Emacs will keep track of file-locking in ${lockdir}. The following values have been set in src/config.h: What operating system and machine description files should Emacs use? \`${opsysfile}' and \`${machfile}' Should Emacs use the GNU version of malloc? ${gnu_malloc}${gnu_malloc_reason} Should Emacs use the relocating allocator for buffers? ${rel_alloc} Should Emacs support a floating point data type? ${lisp_float_type} What window system should Emacs use? ${window_system} What compiler should emacs be built with? ${cc} Should the compilation use \`-g' and/or \`-O'? ${c_switch_site- neither}" # Document the damage we have done by writing config.status. echo '#!/bin/sh' > config.status echo "# This file is generated by \`${progname}.' # If you are thinking about editing it, you should seriously consider # running \`${progname}' instead. " >> config.status echo "${message}" | sed -e 's/^/# /' >> config.status echo "'${progname}' ${arguments} "'$@' >> config.status # Remind people not to edit this. chmod -w config.status chmod +x config.status # Print the description. echo echo "${message}" exit 0