view lib-src/Makefile.in @ 25624:39262276b212

(bat-generic-mode): "::"-style comments don't need to begin with "-". Fix the font-lock definitions of ON/OFF after BREAK/VERIFY. Remove built-in commands like CALL and ECHO from the list of keywords. Add DO to the list of keywords.
author Richard M. Stallman <rms@gnu.org>
date Thu, 09 Sep 1999 21:03:07 +0000
parents e1f1f34e98a7
children f7b5dafed515
line wrap: on
line source

# Makefile for lib-src subdirectory in GNU Emacs.
# Copyright (C) 1985, 1987, 1988, 1993, 1994 Free Software Foundation, Inc.

# This file is part of GNU Emacs.

# GNU Emacs is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.

# GNU Emacs is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with GNU Emacs; see the file COPYING.  If not, write to
# the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
# Boston, MA 02111-1307, USA.

# Avoid trouble on systems where the `SHELL' variable might be
# inherited from the environment.
SHELL = /bin/sh

# ==================== Things `configure' will edit ====================

CC=@CC@
CFLAGS=@CFLAGS@
ALLOCA=@ALLOCA@
YACC=@YACC@
version=@version@
configuration=@configuration@

# ==================== Where To Install Things ====================

# The default location for installation.  Everything is placed in
# subdirectories of this directory.  The default values for many of
# the variables below are expressed in terms of this one, so you may
# not need to change them.  This is set with the --prefix option to
# `../configure'.
prefix=@prefix@

# Like `prefix', but used for architecture-specific files.  This is
# set with the --exec-prefix option to `../configure'.
exec_prefix=@exec_prefix@

# Where to install Emacs and other binaries that people will want to
# run directly (like etags).  This is set with the --bindir option
# to `../configure'.
bindir=@bindir@

# Where to install and expect executable files to be run by Emacs
# rather than directly by users, and other architecture-dependent
# data.  ${archlibdir} is usually below this.  This is set with the
# --libexecdir option to `../configure'.
libexecdir=@libexecdir@

# Where to find the source code.  This is set by the configure
# script's `--srcdir' option.  However, the value of ${srcdir} in
# this makefile is not identical to what was specified with --srcdir,
# since the variable here has `/lib-src' added at the end.

# We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
srcdir=@srcdir@
VPATH=@srcdir@

# The top-level source directory, also set by configure.
top_srcdir=@top_srcdir@

# ==================== Emacs-specific directories ====================

# These variables hold the values Emacs will actually use.  They are
# based on the values of the standard Make variables above.

# Where to put executables to be run by Emacs rather than the user.
# This path usually includes the Emacs version and configuration name,
# so that multiple configurations for multiple versions of Emacs may
# be installed at once.  This can be set with the --archlibdir option
# to `../configure'.
archlibdir=@archlibdir@

# ==================== Utility Programs for the Build =================

# ../configure figures out the correct values for these.
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
# By default, we uphold the dignity of our programs.
INSTALL_STRIP =

# ========================== Lists of Files ===========================

# Things that a user might actually run,
# which should be installed in bindir.
INSTALLABLES = etags ctags emacsclient b2m
INSTALLABLE_SCRIPTS = rcs-checkin grep-changelog

# Things that Emacs runs internally, or during the build process,
#  which should not be installed in bindir.
UTILITIES=  profile digest-doc \
	sorted-doc movemail cvtmail fakemail yow emacsserver hexl

DONT_INSTALL= test-distrib make-docfile

# Like UTILITIES, but they're not system-dependent, and should not be
#  deleted by the distclean target.
SCRIPTS= rcs2log vcdiff

EXECUTABLES= ${UTILITIES} ${INSTALLABLES} ${SCRIPTS} ${INSTALLABLE_SCRIPTS}

SOURCES = COPYING ChangeLog Makefile.in README emacs.csh \
	makedoc.com *.[chy] rcs2log vcdiff

# Additional -D flags for movemail (add to MOVE_FLAGS if desired):
# MAIL_USE_POP		Support mail retrieval from a POP mailbox.
# MAIL_USE_MMDF		Support MMDF mailboxes.
# MAIL_USE_FLOCK	Use flock for file locking (see the comments
#			about locking in movemail.c)
# MAIL_UNLINK_SPOOL	Unlink the user's spool mailbox after reading
#			it (instead of just emptying it).
# KERBEROS		Support Kerberized POP.
# KRB5			Support Kerberos Version 5 pop instead of
#			Version 4 (define this in addition to
#			KERBEROS).
# HESIOD		Support Hesiod lookups of user mailboxes.
# MAILHOST		A string, the host name of the default POP
#			mail host for the site.
MOVE_FLAGS=

# ========================== start of cpp stuff =======================
/* From here on, comments must be done in C syntax.  */

#define NO_SHORTNAMES
#define THIS_IS_MAKEFILE
#define NOT_C_CODE
#include "../src/config.h"

/* We won't really call alloca;
   don't let the file name alloca.c get messed up.  */
#ifdef alloca
#undef alloca
#endif

/* Some machines don't find the standard C libraries in the usual place.  */
#ifndef ORDINARY_LINK
#ifndef LIB_STANDARD_LIBSRC
#define LIB_STANDARD_LIBSRC -lc
#endif
#else
#ifndef LIB_STANDARD_LIBSRC
#define LIB_STANDARD_LIBSRC
#endif
#endif

/* Some s/SYSTEM.h files define this to request special libraries.  */
#ifndef LIBS_SYSTEM
#define LIBS_SYSTEM
#endif

/* Some m/MACHINE.h files define this to request special libraries.  */
#ifndef LIBS_MACHINE
#define LIBS_MACHINE
#endif

#ifndef C_SWITCH_SYSTEM
#define C_SWITCH_SYSTEM
#endif

#ifndef C_SWITCH_MACHINE
#define C_SWITCH_MACHINE
#endif

#undef MOVEMAIL_NEEDS_BLESSING
#ifndef MAIL_USE_FLOCK
#ifndef MAIL_USE_LOCKF
#define MOVEMAIL_NEEDS_BLESSING
#endif
#endif

#ifdef MOVEMAIL_NEEDS_BLESSING
#define BLESSMAIL blessmail
#else
#define BLESSMAIL
#endif

#ifdef KERBEROS
# ifdef HAVE_LIBKRB
    KRB4LIB = -lkrb
# else
#  ifdef HAVE_LIBKRB4
     KRB4LIB = -lkrb4
#  endif
# endif
# ifdef HAVE_LIBDES
    DESLIB = -ldes
# else
#  ifdef HAVE_LIBDES425
    DESLIB = -ldes425
#  endif
# endif
# ifdef HAVE_LIBKRB5
    KRB5LIB = -lkrb5
# endif
# ifdef HAVE_LIBCRYPTO
    CRYPTOLIB = -lcrypto
# endif
# ifdef HAVE_LIBCOM_ERR
    COM_ERRLIB = -lcom_err
# endif
#endif /* KERBEROS */

/* If HESIOD is defined, set this to "-lhesiod". */
HESIODLIB=

MOVE_LIBS=$(KRB4LIB) $(DESLIB) $(KRB5LIB) $(CRYPTOLIB) $(COM_ERRLIB) $(HESIODLIB)

#ifdef HAVE_LIBMAIL
LIBMAIL=-lmail
#endif

LOADLIBES=LIBS_SYSTEM LIBS_MACHINE LIB_STANDARD_LIBSRC

/* We need to #define emacs to get the right versions of some files.
   Some other files - those shared with other GNU utilities - need
   HAVE_CONFIG_H #defined before they know they can take advantage of
   the information in ../src/config.h.  */
ALL_CFLAGS = C_SWITCH_SYSTEM C_SWITCH_MACHINE -DHAVE_CONFIG_H \
   -I. -I../src -I${srcdir} -I${srcdir}/../src ${LDFLAGS} ${CPPFLAGS} ${CFLAGS}
LINK_CFLAGS = C_SWITCH_SYSTEM C_SWITCH_MACHINE -DHAVE_CONFIG_H \
   -I. -I../src -I${srcdir} -I${srcdir}/../src ${LDFLAGS} ${CFLAGS}
CPP_CFLAGS = C_SWITCH_SYSTEM C_SWITCH_MACHINE -DHAVE_CONFIG_H \
   -I. -I../src -I${srcdir} -I${srcdir}/../src ${CPPFLAGS} ${CFLAGS}
/* This was all of CPP_CFLAGS except -Demacs.
   Now that -Demacs has been deleted from CPP_CFLAGS,
   this is actually the same as CPP_CFLAGS, but let's not delete it yet.  */
BASE_CFLAGS = C_SWITCH_SYSTEM C_SWITCH_MACHINE -DHAVE_CONFIG_H \
   -I. -I../src -I${srcdir} -I${srcdir}/../src ${CPPFLAGS} ${CFLAGS}

/* This is the default compilation command.
   But we should never rely on it, because some make version
   failed to find it for getopt.o.
   Using an explicit command made it work.  */
.c.o:
	${CC} -c ${CPP_CFLAGS} $<

all: ${DONT_INSTALL} ${UTILITIES} ${INSTALLABLES}

#ifdef MOVEMAIL_NEEDS_BLESSING
blessmail:
	../src/emacs -batch -l $(srcdir)/../lisp/mail/blessmail.el
	chmod +x blessmail
#endif

maybe-blessmail: BLESSMAIL
#ifdef MOVEMAIL_NEEDS_BLESSING
/* Don't charge ahead and do it!  Let the installer decide.
	  ./blessmail ${archlibdir}/movemail  */
	@if [ `wc -l <blessmail` != 2 ] ; then \
	  dir=`sed -n -e 's/echo mail directory = \(.*\)/\1/p' blessmail`; \
	  echo Assuming $$dir is really the mail spool directory, you should; \
	  echo run  lib-src/blessmail ${archlibdir}/movemail; \
	  echo as root, to give  movemail  appropriate permissions.; \
	  echo Do that after running  make install.; \
	fi
#endif

/* Install the internal utilities.  Until they are installed, we can
   just run them directly from lib-src.  */
${archlibdir}: all
	@echo
	@echo "Installing utilities run internally by Emacs."
	$(top_srcdir)/mkinstalldirs ${archlibdir}
	if [ `(cd ${archlibdir} && /bin/pwd)` != `/bin/pwd` ]; then \
	  for file in ${UTILITIES}; do \
	    $(INSTALL_PROGRAM) $(INSTALL_STRIP) $$file ${archlibdir}/$$file ; \
	  done ; \
        fi
        if [ `(cd ${archlibdir} && /bin/pwd)` \
             != `(cd ${srcdir} && /bin/pwd)` ]; then \
	  for file in ${SCRIPTS}; do \
	    $(INSTALL_PROGRAM) ${srcdir}/$$file ${archlibdir}/$$file; \
	  done ; \
	fi

install: ${archlibdir}
	@echo
	@echo "Installing utilities for users to run."
	for file in ${INSTALLABLES} ; do \
	  $(INSTALL_PROGRAM) $(INSTALL_STRIP) $${file} ${bindir}/$${file} ; \
	  chmod a+rx ${bindir}/$${file}; \
	done
	for file in ${INSTALLABLE_SCRIPTS} ; do \
	  $(INSTALL_PROGRAM) ${srcdir}/$${file} ${bindir}/$${file} ; \
	  chmod a+rx ${bindir}/$${file}; \
	done

uninstall:
	(cd ${bindir}; \
	 rm -f ${INSTALLABLES} ${INSTALLABLE_SCRIPTS})
	(cd ${archlibdir}; \
	 rm -f ${UTILITIES} ${INSTALLABLES} ${SCRIPTS} ${INSTALLABLE_SCRIPTS})

mostlyclean:
	-rm -f core *.o

clean: mostlyclean
	-rm -f ${INSTALLABLES} ${UTILITIES} ${DONT_INSTALL}
	-rm -f ../etc/DOC* fns*.el *.tab.c *.tab.h

distclean: clean
	-rm -f TAGS
	-rm -f Makefile Makefile.c blessmail

maintainer-clean: distclean
	true

extraclean: maintainer-clean
	-rm -f *~ \#*

unlock:
	chmod u+w $(SOURCES)

relock:
	chmod u-w $(SOURCES)

/* Test the contents of the directory.  */
check:
	@echo "We don't have any tests for GNU Emacs yet."

tags: TAGS
TAGS: etags
	etags *.[ch]

/* This verifies that the non-ASCII characters in the file `testfile'
   have not been clobbered by whatever means were used to copy and
   distribute Emacs.  If they were clobbered, all the .elc files were
   clobbered too.  */
test-distrib: ${srcdir}/test-distrib.c
	$(CC) ${ALL_CFLAGS} -o test-distrib ${srcdir}/test-distrib.c
	./test-distrib ${srcdir}/testfile

GETOPTOBJS = getopt.o getopt1.o $(ALLOCA)
GETOPTDEPS = $(GETOPTOBJS) ${srcdir}/getopt.h
getopt.o: ${srcdir}/getopt.c ${srcdir}/getopt.h
	${CC} -c ${CPP_CFLAGS} ${srcdir}/getopt.c
getopt1.o: ${srcdir}/getopt1.c ${srcdir}/getopt.h
	${CC} -c ${CPP_CFLAGS} ${srcdir}/getopt1.c
alloca.o: ${srcdir}/alloca.c
	${CC} -c ${BASE_CFLAGS} ${srcdir}/alloca.c

#ifdef REGEXP_IN_LIBC
REGEXPOBJ =
REGEXPDEPS =
#else
REGEXPOBJ = regex.o
REGEXPDEPS = $(REGEXPOBJ) $(srcdir)/../src/regex.h
#endif

regex.o: $(srcdir)/../src/regex.c $(srcdir)/../src/regex.h ../src/config.h
	${CC} -c ${BASE_CFLAGS} -DCONFIG_BROKETS -DINHIBIT_STRING_HEADER ${srcdir}/../src/regex.c

etags: ${srcdir}/etags.c $(GETOPTDEPS) $(REGEXPDEPS) ../src/config.h
	$(CC) ${ALL_CFLAGS} -DVERSION="\"${version}\"" ${srcdir}/etags.c $(GETOPTOBJS) $(REGEXPOBJ) $(LOADLIBES) -o etags

/* We depend on etags to assure that parallel makes don't write two
   etags.o files on top of each other.  */
ctags: etags
	$(CC) ${ALL_CFLAGS} -DCTAGS -DVERSION="\"${version}\"" ${srcdir}/etags.c $(GETOPTOBJS) $(REGEXPOBJ) $(LOADLIBES) -o ctags

profile: ${srcdir}/profile.c
	$(CC) ${ALL_CFLAGS} ${srcdir}/profile.c $(LOADLIBES) -o profile

make-docfile: ${srcdir}/make-docfile.c
	$(CC) ${ALL_CFLAGS} ${srcdir}/make-docfile.c $(LOADLIBES) -o make-docfile

digest-doc: ${srcdir}/digest-doc.c
	$(CC) ${ALL_CFLAGS} ${srcdir}/digest-doc.c $(LOADLIBES) -o digest-doc 

sorted-doc: ${srcdir}/sorted-doc.c ${ALLOCA}
	$(CC) ${ALL_CFLAGS} ${srcdir}/sorted-doc.c ${ALLOCA} $(LOADLIBES) -o sorted-doc

b2m: ${srcdir}/b2m.c ../src/config.h
	$(CC) ${ALL_CFLAGS} ${srcdir}/b2m.c  -DVERSION="\"${version}\"" \
	   $(GETOPTOBJS) $(LOADLIBES) -o b2m 

movemail: movemail.o pop.o $(GETOPTDEPS)
	$(CC) ${LINK_CFLAGS} ${MOVE_FLAGS} movemail.o pop.o $(GETOPTOBJS) $(LOADLIBES) $(LIBMAIL) $(MOVE_LIBS) -o movemail

movemail.o: ${srcdir}/movemail.c ../src/config.h
	$(CC) -c ${CPP_CFLAGS} -Demacs ${MOVE_FLAGS} ${srcdir}/movemail.c

pop.o: ${srcdir}/pop.c
	$(CC) -c ${CPP_CFLAGS} ${MOVE_FLAGS} ${srcdir}/pop.c

cvtmail: ${srcdir}/cvtmail.c
	$(CC) ${ALL_CFLAGS} ${srcdir}/cvtmail.c $(LOADLIBES) -o cvtmail

fakemail: ${srcdir}/fakemail.c ../src/config.h
	$(CC) ${ALL_CFLAGS} ${srcdir}/fakemail.c $(LOADLIBES) -o fakemail

yow: ${srcdir}/yow.c ../src/epaths.h
	$(CC) ${ALL_CFLAGS} ${srcdir}/yow.c $(LOADLIBES) -o yow

emacsserver: ${srcdir}/emacsserver.c ../src/config.h
	$(CC) ${ALL_CFLAGS} ${srcdir}/emacsserver.c $(LOADLIBES) -o emacsserver

emacsclient: ${srcdir}/emacsclient.c ../src/config.h $(GETOPTDEPS)
	$(CC) ${ALL_CFLAGS} ${srcdir}/emacsclient.c $(GETOPTOBJS)  \
	   -DVERSION=`sed -n -e '/(defconst emacs-version/ s/^[^"]*\("[^"]*"\).*/\1/p' ${srcdir}/../lisp/version.el` \
	   $(LOADLIBES) -o emacsclient

hexl: ${srcdir}/hexl.c
	$(CC) ${ALL_CFLAGS} ${srcdir}/hexl.c $(LOADLIBES) -o hexl

/* These are NOT included in INSTALLABLES or UTILITIES.
   See ../src/Makefile.in.  */
emacstool: ${srcdir}/emacstool.c
	$(CC) ${srcdir}/emacstool.c -o emacstool ${ALL_CFLAGS} \
	  -lsuntool -lsunwindow -lpixrect $(LOADLIBES)

/* For SUN Japanese Language Environment.  */
nemacstool: ${srcdir}/emacstool.c
	$(CC) -o nemacstool -DJLE ${ALL_CFLAGS} ${srcdir}/emacstool.c \
	  -lsuntool -lmle -lsunwindow -lpixrect $(LOADLIBES)

xvetool: ${srcdir}/emacstool.c
	$(CC) -o xvetool -DXVIEW ${ALL_CFLAGS} ${srcdir}/emacstool.c \
	  -lxview -lX -I$(OPENWINHOME)/include -L$(OPENWINHOME)/lib \
	  $(LOADLIBES)

xveterm: ${srcdir}/emacstool.c
	$(CC) -o xveterm -DXVIEW -DTTERM ${ALL_CFLAGS} ${srcdir}/emacstool.c \
	  -lxview -lolgx -lX  -I$(OPENWINHOME)/include -L$(OPENWINHOME)/lib \
	  $(LOADLIBES)