Mercurial > emacs
view man/files.texi @ 27993:3a34e2d1bf3c
(select_visual): Rewritten. Recognize user-specified
visual classes.
(visual_classes): New variable.
author | Gerd Moellmann <gerd@gnu.org> |
---|---|
date | Sun, 05 Mar 2000 10:25:26 +0000 |
parents | c881de80a22b |
children | 6e2e72ee55a6 |
line wrap: on
line source
@c This is part of the Emacs manual. @c Copyright (C) 1985,86,87,93,94,95,97,1999 Free Software Foundation, Inc. @c See file emacs.texi for copying conditions. @node Files, Buffers, Fixit, Top @chapter File Handling @cindex files The operating system stores data permanently in named @dfn{files}. So most of the text you edit with Emacs comes from a file and is ultimately stored in a file. To edit a file, you must tell Emacs to read the file and prepare a buffer containing a copy of the file's text. This is called @dfn{visiting} the file. Editing commands apply directly to text in the buffer; that is, to the copy inside Emacs. Your changes appear in the file itself only when you @dfn{save} the buffer back into the file. In addition to visiting and saving files, Emacs can delete, copy, rename, and append to files, keep multiple versions of them, and operate on file directories. @menu * File Names:: How to type and edit file-name arguments. * Visiting:: Visiting a file prepares Emacs to edit the file. * Saving:: Saving makes your changes permanent. * Reverting:: Reverting cancels all the changes not saved. * Auto Save:: Auto Save periodically protects against loss of data. * File Aliases:: Handling multiple names for one file. * Version Control:: Version control systems (RCS, CVS and SCCS). * Directories:: Creating, deleting, and listing file directories. * Comparing Files:: Finding where two files differ. * Misc File Ops:: Other things you can do on files. * Compressed Files:: Accessing compressed files. * Remote Files:: Accessing files on other sites. * Quoted File Names:: Quoting special characters in file names. @end menu @node File Names @section File Names @cindex file names Most Emacs commands that operate on a file require you to specify the file name. (Saving and reverting are exceptions; the buffer knows which file name to use for them.) You enter the file name using the minibuffer (@pxref{Minibuffer}). @dfn{Completion} is available, to make it easier to specify long file names. @xref{Completion}. For most operations, there is a @dfn{default file name} which is used if you type just @key{RET} to enter an empty argument. Normally the default file name is the name of the file visited in the current buffer; this makes it easy to operate on that file with any of the Emacs file commands. @vindex default-directory Each buffer has a default directory, normally the same as the directory of the file visited in that buffer. When you enter a file name without a directory, the default directory is used. If you specify a directory in a relative fashion, with a name that does not start with a slash, it is interpreted with respect to the default directory. The default directory is kept in the variable @code{default-directory}, which has a separate value in every buffer. For example, if the default file name is @file{/u/rms/gnu/gnu.tasks} then the default directory is @file{/u/rms/gnu/}. If you type just @samp{foo}, which does not specify a directory, it is short for @file{/u/rms/gnu/foo}. @samp{../.login} would stand for @file{/u/rms/.login}. @samp{new/foo} would stand for the file name @file{/u/rms/gnu/new/foo}. @findex cd @findex pwd The command @kbd{M-x pwd} prints the current buffer's default directory, and the command @kbd{M-x cd} sets it (to a value read using the minibuffer). A buffer's default directory changes only when the @code{cd} command is used. A file-visiting buffer's default directory is initialized to the directory of the file that is visited there. If you create a buffer with @kbd{C-x b}, its default directory is copied from that of the buffer that was current at the time. @vindex insert-default-directory The default directory actually appears in the minibuffer when the minibuffer becomes active to read a file name. This serves two purposes: it @emph{shows} you what the default is, so that you can type a relative file name and know with certainty what it will mean, and it allows you to @emph{edit} the default to specify a different directory. This insertion of the default directory is inhibited if the variable @code{insert-default-directory} is set to @code{nil}. Note that it is legitimate to type an absolute file name after you enter the minibuffer, ignoring the presence of the default directory name as part of the text. The final minibuffer contents may look invalid, but that is not so. For example, if the minibuffer starts out with @samp{/usr/tmp/} and you add @samp{/x1/rms/foo}, you get @samp{/usr/tmp//x1/rms/foo}; but Emacs ignores everything through the first slash in the double slash; the result is @samp{/x1/rms/foo}. @xref{Minibuffer File}. @samp{$} in a file name is used to substitute environment variables. For example, if you have used the shell command @samp{export FOO=rms/hacks} to set up an environment variable named @code{FOO}, then you can use @file{/u/$FOO/test.c} or @file{/u/$@{FOO@}/test.c} as an abbreviation for @file{/u/rms/hacks/test.c}. The environment variable name consists of all the alphanumeric characters after the @samp{$}; alternatively, it may be enclosed in braces after the @samp{$}. Note that shell commands to set environment variables affect Emacs only if done before Emacs is started. To access a file with @samp{$} in its name, type @samp{$$}. This pair is converted to a single @samp{$} at the same time as variable substitution is performed for single @samp{$}. Alternatively, quote the whole file name with @samp{/:} (@pxref{Quoted File Names}). @findex substitute-in-file-name The Lisp function that performs the substitution is called @code{substitute-in-file-name}. The substitution is performed only on file names read as such using the minibuffer. You can include non-ASCII characters in file names if you set the variable @code{file-name-coding-system} to a non-@code{nil} value. @xref{Specify Coding}. @node Visiting @section Visiting Files @cindex visiting files @c WideCommands @table @kbd @item C-x C-f Visit a file (@code{find-file}). @item C-x C-r Visit a file for viewing, without allowing changes to it (@code{find-file-read-only}). @item C-x C-v Visit a different file instead of the one visited last (@code{find-alternate-file}). @item C-x 4 f Visit a file, in another window (@code{find-file-other-window}). Don't alter what is displayed in the selected window. @item C-x 5 f Visit a file, in a new frame (@code{find-file-other-frame}). Don't alter what is displayed in the selected frame. @item M-x find-file-literally Visit a file with no conversion of the contents. @end table @cindex files, visiting and saving @cindex visiting files @cindex saving files @dfn{Visiting} a file means copying its contents into an Emacs buffer so you can edit them. Emacs makes a new buffer for each file that you visit. We say that this buffer is visiting the file that it was created to hold. Emacs constructs the buffer name from the file name by throwing away the directory, keeping just the name proper. For example, a file named @file{/usr/rms/emacs.tex} would get a buffer named @samp{emacs.tex}. If there is already a buffer with that name, a unique name is constructed by appending @samp{<2>}, @samp{<3>}, or so on, using the lowest number that makes a name that is not already in use. Each window's mode line shows the name of the buffer that is being displayed in that window, so you can always tell what buffer you are editing. The changes you make with editing commands are made in the Emacs buffer. They do not take effect in the file that you visited, or any place permanent, until you @dfn{save} the buffer. Saving the buffer means that Emacs writes the current contents of the buffer into its visited file. @xref{Saving}. @cindex modified (buffer) If a buffer contains changes that have not been saved, we say the buffer is @dfn{modified}. This is important because it implies that some changes will be lost if the buffer is not saved. The mode line displays two stars near the left margin to indicate that the buffer is modified. @kindex C-x C-f @findex find-file To visit a file, use the command @kbd{C-x C-f} (@code{find-file}). Follow the command with the name of the file you wish to visit, terminated by a @key{RET}. The file name is read using the minibuffer (@pxref{Minibuffer}), with defaulting and completion in the standard manner (@pxref{File Names}). While in the minibuffer, you can abort @kbd{C-x C-f} by typing @kbd{C-g}. Your confirmation that @kbd{C-x C-f} has completed successfully is the appearance of new text on the screen and a new buffer name in the mode line. If the specified file does not exist and could not be created, or cannot be read, then you get an error, with an error message displayed in the echo area. If you visit a file that is already in Emacs, @kbd{C-x C-f} does not make another copy. It selects the existing buffer containing that file. However, before doing so, it checks that the file itself has not changed since you visited or saved it last. If the file has changed, a warning message is printed. @xref{Interlocking,,Simultaneous Editing}. @cindex creating files What if you want to create a new file? Just visit it. Emacs prints @samp{(New File)} in the echo area, but in other respects behaves as if you had visited an existing empty file. If you make any changes and save them, the file is created. Emacs recognizes from the contents of a file which convention it uses to separate lines---newline (used on GNU/Linux and on Unix), carriage-return linefeed (used on Microsoft systems), or just carriage-return (used on the Macintosh)---and automatically converts the contents to the normal Emacs convention, which is that the newline character separates lines. This is a part of the general feature of coding system conversion (@pxref{Coding Systems}), and makes it possible to edit files imported from various different operating systems with equal convenience. If you change the text and save the file, Emacs performs the inverse conversion, changing newlines back into carriage-return linefeed or just carriage-return if appropriate. @vindex find-file-run-dired If the file you specify is actually a directory, @kbd{C-x C-f} invokes Dired, the Emacs directory browser, so that you can ``edit'' the contents of the directory (@pxref{Dired}). Dired is a convenient way to delete, look at, or operate on the files in the directory. However, if the variable @code{find-file-run-dired} is @code{nil}, then it is an error to try to visit a directory. If the file name you specify contains wildcard characters, Emacs visits all the files that match it. @xref{Quoted File Names}, if you want to visit a file whose name actually contains wildcard characters. If you visit a file that the operating system won't let you modify, Emacs makes the buffer read-only, so that you won't go ahead and make changes that you'll have trouble saving afterward. You can make the buffer writable with @kbd{C-x C-q} (@code{vc-toggle-read-only}). @xref{Misc Buffer}. @kindex C-x C-r @findex find-file-read-only Occasionally you might want to visit a file as read-only in order to protect yourself from entering changes accidentally; do so by visiting the file with the command @kbd{C-x C-r} (@code{find-file-read-only}). @kindex C-x C-v @findex find-alternate-file If you visit a nonexistent file unintentionally (because you typed the wrong file name), use the @kbd{C-x C-v} command (@code{find-alternate-file}) to visit the file you really wanted. @kbd{C-x C-v} is similar to @kbd{C-x C-f}, but it kills the current buffer (after first offering to save it if it is modified). When it reads the file name to visit, it inserts the entire default file name in the buffer, with point just after the directory part; this is convenient if you made a slight error in typing the name. If you find a file which exists but cannot be read, @kbd{C-x C-f} signals an error. @kindex C-x 4 f @findex find-file-other-window @kbd{C-x 4 f} (@code{find-file-other-window}) is like @kbd{C-x C-f} except that the buffer containing the specified file is selected in another window. The window that was selected before @kbd{C-x 4 f} continues to show the same buffer it was already showing. If this command is used when only one window is being displayed, that window is split in two, with one window showing the same buffer as before, and the other one showing the newly requested file. @xref{Windows}. @kindex C-x 5 f @findex find-file-other-frame @kbd{C-x 5 f} (@code{find-file-other-frame}) is similar, but opens a new frame, or makes visible any existing frame showing the file you seek. This feature is available only when you are using a window system. @xref{Frames}. @findex find-file-literally If you wish to edit a file as a sequence of characters with no special encoding or conversion, use the @kbd{M-x find-file-literally} command. It visits a file, like @kbd{C-x C-f}, but does not do format conversion (@pxref{Formatted Text}), character code conversion (@pxref{Coding Systems}), or automatic uncompression (@pxref{Compressed Files}). If you already have visited the same file in the usual (non-literal) manner, this command asks you whether to visit it literally instead. @vindex find-file-hooks @vindex find-file-not-found-hooks Two special hook variables allow extensions to modify the operation of visiting files. Visiting a file that does not exist runs the functions in the list @code{find-file-not-found-hooks}; this variable holds a list of functions, and the functions are called one by one (with no arguments) until one of them returns non-@code{nil}. This is not a normal hook, and the name ends in @samp{-hooks} rather than @samp{-hook} to indicate that fact. Any visiting of a file, whether extant or not, expects @code{find-file-hooks} to contain a list of functions, and calls them all, one by one, with no arguments. This variable is really a normal hook, but it has an abnormal name for historical compatibility. In the case of a nonexistent file, the @code{find-file-not-found-hooks} are run first. @xref{Hooks}. There are several ways to specify automatically the major mode for editing the file (@pxref{Choosing Modes}), and to specify local variables defined for that file (@pxref{File Variables}). @node Saving @section Saving Files @dfn{Saving} a buffer in Emacs means writing its contents back into the file that was visited in the buffer. @table @kbd @item C-x C-s Save the current buffer in its visited file (@code{save-buffer}). @item C-x s Save any or all buffers in their visited files (@code{save-some-buffers}). @item M-~ Forget that the current buffer has been changed (@code{not-modified}). @item C-x C-w Save the current buffer in a specified file (@code{write-file}). @item M-x set-visited-file-name Change file the name under which the current buffer will be saved. @end table @kindex C-x C-s @findex save-buffer When you wish to save the file and make your changes permanent, type @kbd{C-x C-s} (@code{save-buffer}). After saving is finished, @kbd{C-x C-s} displays a message like this: @example Wrote /u/rms/gnu/gnu.tasks @end example @noindent If the selected buffer is not modified (no changes have been made in it since the buffer was created or last saved), saving is not really done, because it would have no effect. Instead, @kbd{C-x C-s} displays a message like this in the echo area: @example (No changes need to be saved) @end example @kindex C-x s @findex save-some-buffers The command @kbd{C-x s} (@code{save-some-buffers}) offers to save any or all modified buffers. It asks you what to do with each buffer. The possible responses are analogous to those of @code{query-replace}: @table @kbd @item y Save this buffer and ask about the rest of the buffers. @item n Don't save this buffer, but ask about the rest of the buffers. @item ! Save this buffer and all the rest with no more questions. @c following generates acceptable underfull hbox @item @key{RET} Terminate @code{save-some-buffers} without any more saving. @item . Save this buffer, then exit @code{save-some-buffers} without even asking about other buffers. @item C-r View the buffer that you are currently being asked about. When you exit View mode, you get back to @code{save-some-buffers}, which asks the question again. @item C-h Display a help message about these options. @end table @kbd{C-x C-c}, the key sequence to exit Emacs, invokes @code{save-some-buffers} and therefore asks the same questions. @kindex M-~ @findex not-modified If you have changed a buffer but you do not want to save the changes, you should take some action to prevent it. Otherwise, each time you use @kbd{C-x s} or @kbd{C-x C-c}, you are liable to save this buffer by mistake. One thing you can do is type @kbd{M-~} (@code{not-modified}), which clears out the indication that the buffer is modified. If you do this, none of the save commands will believe that the buffer needs to be saved. (@samp{~} is often used as a mathematical symbol for `not'; thus @kbd{M-~} is `not', metafied.) You could also use @code{set-visited-file-name} (see below) to mark the buffer as visiting a different file name, one which is not in use for anything important. Alternatively, you can cancel all the changes made since the file was visited or saved, by reading the text from the file again. This is called @dfn{reverting}. @xref{Reverting}. You could also undo all the changes by repeating the undo command @kbd{C-x u} until you have undone all the changes; but reverting is easier. @findex set-visited-file-name @kbd{M-x set-visited-file-name} alters the name of the file that the current buffer is visiting. It reads the new file name using the minibuffer. Then it specifies the visited file name and changes the buffer name correspondingly (as long as the new name is not in use). @code{set-visited-file-name} does not save the buffer in the newly visited file; it just alters the records inside Emacs in case you do save later. It also marks the buffer as ``modified'' so that @kbd{C-x C-s} in that buffer @emph{will} save. @kindex C-x C-w @findex write-file If you wish to mark the buffer as visiting a different file and save it right away, use @kbd{C-x C-w} (@code{write-file}). It is precisely equivalent to @code{set-visited-file-name} followed by @kbd{C-x C-s}. @kbd{C-x C-s} used on a buffer that is not visiting a file has the same effect as @kbd{C-x C-w}; that is, it reads a file name, marks the buffer as visiting that file, and saves it there. The default file name in a buffer that is not visiting a file is made by combining the buffer name with the buffer's default directory. If the new file name implies a major mode, then @kbd{C-x C-w} switches to that major mode, in most cases. The command @code{set-visited-file-name} also does this. @xref{Choosing Modes}. If Emacs is about to save a file and sees that the date of the latest version on disk does not match what Emacs last read or wrote, Emacs notifies you of this fact, because it probably indicates a problem caused by simultaneous editing and requires your immediate attention. @xref{Interlocking,, Simultaneous Editing}. @vindex require-final-newline If the variable @code{require-final-newline} is non-@code{nil}, Emacs puts a newline at the end of any file that doesn't already end in one, every time a file is saved or written. The default is @code{nil}. @menu * Backup:: How Emacs saves the old version of your file. * Interlocking:: How Emacs protects against simultaneous editing of one file by two users. @end menu @node Backup @subsection Backup Files @cindex backup file @vindex make-backup-files @vindex vc-make-backup-files @vindex backup-enable-predicate On most operating systems, rewriting a file automatically destroys all record of what the file used to contain. Thus, saving a file from Emacs throws away the old contents of the file---or it would, except that Emacs carefully copies the old contents to another file, called the @dfn{backup} file, before actually saving. For most files, the variable @code{make-backup-files} determines whether to make backup files. On most operating systems, its default value is @code{t}, so that Emacs does write backup files. For files managed by a version control system (@pxref{Version Control}), the variable @code{vc-make-backup-files} determines whether to make backup files. By default, it is @code{nil}, since backup files are redundant when you store all the previous versions in a version control system. @xref{VC Workfile Handling}. The default value of the @code{backup-enable-predicate} variable prevents backup files being written for files in @file{/tmp}. At your option, Emacs can keep either a single backup file or a series of numbered backup files for each file that you edit. Emacs makes a backup for a file only the first time the file is saved from one buffer. No matter how many times you save a file, its backup file continues to contain the contents from before the file was visited. Normally this means that the backup file contains the contents from before the current editing session; however, if you kill the buffer and then visit the file again, a new backup file will be made by the next save. You can also explicitly request making another backup file from a buffer even though it has already been saved at least once. If you save the buffer with @kbd{C-u C-x C-s}, the version thus saved will be made into a backup file if you save the buffer again. @kbd{C-u C-u C-x C-s} saves the buffer, but first makes the previous file contents into a new backup file. @kbd{C-u C-u C-u C-x C-s} does both things: it makes a backup from the previous contents, and arranges to make another from the newly saved contents, if you save again. @menu * Names: Backup Names. How backup files are named; choosing single or numbered backup files. * Deletion: Backup Deletion. Emacs deletes excess numbered backups. * Copying: Backup Copying. Backups can be made by copying or renaming. @end menu @node Backup Names @subsubsection Single or Numbered Backups If you choose to have a single backup file (this is the default), the backup file's name is constructed by appending @samp{~} to the file name being edited; thus, the backup file for @file{eval.c} would be @file{eval.c~}. If you choose to have a series of numbered backup files, backup file names are made by appending @samp{.~}, the number, and another @samp{~} to the original file name. Thus, the backup files of @file{eval.c} would be called @file{eval.c.~1~}, @file{eval.c.~2~}, and so on, through names like @file{eval.c.~259~} and beyond. If protection stops you from writing backup files under the usual names, the backup file is written as @file{%backup%~} in your home directory. Only one such file can exist, so only the most recently made such backup is available. @vindex version-control The choice of single backup or numbered backups is controlled by the variable @code{version-control}. Its possible values are @table @code @item t Make numbered backups. @item nil Make numbered backups for files that have numbered backups already. Otherwise, make single backups. @item never Do not in any case make numbered backups; always make single backups. @end table @noindent You can set @code{version-control} locally in an individual buffer to control the making of backups for that buffer's file. For example, Rmail mode locally sets @code{version-control} to @code{never} to make sure that there is only one backup for an Rmail file. @xref{Locals}. @cindex @code{VERSION_CONTROL} environment variable If you set the environment variable @code{VERSION_CONTROL}, to tell various GNU utilities what to do with backup files, Emacs also obeys the environment variable by setting the Lisp variable @code{version-control} accordingly at startup. If the environment variable's value is @samp{t} or @samp{numbered}, then @code{version-control} becomes @code{t}; if the value is @samp{nil} or @samp{existing}, then @code{version-control} becomes @code{nil}; if it is @samp{never} or @samp{simple}, then @code{version-control} becomes @code{never}. @node Backup Deletion @subsubsection Automatic Deletion of Backups To prevent unlimited consumption of disk space, Emacs can delete numbered backup versions automatically. Generally Emacs keeps the first few backups and the latest few backups, deleting any in between. This happens every time a new backup is made. @vindex kept-old-versions @vindex kept-new-versions The two variables @code{kept-old-versions} and @code{kept-new-versions} control this deletion. Their values are, respectively the number of oldest (lowest-numbered) backups to keep and the number of newest (highest-numbered) ones to keep, each time a new backup is made. Recall that these values are used just after a new backup version is made; that newly made backup is included in the count in @code{kept-new-versions}. By default, both variables are 2. @vindex delete-old-versions If @code{delete-old-versions} is non-@code{nil}, the excess middle versions are deleted without a murmur. If it is @code{nil}, the default, then you are asked whether the excess middle versions should really be deleted. Dired's @kbd{.} (Period) command can also be used to delete old versions. @xref{Dired Deletion}. @node Backup Copying @subsubsection Copying vs.@: Renaming Backup files can be made by copying the old file or by renaming it. This makes a difference when the old file has multiple names. If the old file is renamed into the backup file, then the alternate names become names for the backup file. If the old file is copied instead, then the alternate names remain names for the file that you are editing, and the contents accessed by those names will be the new contents. The method of making a backup file may also affect the file's owner and group. If copying is used, these do not change. If renaming is used, you become the file's owner, and the file's group becomes the default (different operating systems have different defaults for the group). Having the owner change is usually a good idea, because then the owner always shows who last edited the file. Also, the owners of the backups show who produced those versions. Occasionally there is a file whose owner should not change; it is a good idea for such files to contain local variable lists to set @code{backup-by-copying-when-mismatch} locally (@pxref{File Variables}). @vindex backup-by-copying @vindex backup-by-copying-when-linked @vindex backup-by-copying-when-mismatch The choice of renaming or copying is controlled by three variables. Renaming is the default choice. If the variable @code{backup-by-copying} is non-@code{nil}, copying is used. Otherwise, if the variable @code{backup-by-copying-when-linked} is non-@code{nil}, then copying is used for files that have multiple names, but renaming may still be used when the file being edited has only one name. If the variable @code{backup-by-copying-when-mismatch} is non-@code{nil}, then copying is used if renaming would cause the file's owner or group to change. @code{backup-by-copying-when-mismatch} is @code{t} by default if you start Emacs as the superuser. When a file is managed with a version control system (@pxref{Version Control}), Emacs does not normally make backups in the usual way for that file. But check-in and check-out are similar in some ways to making backups. One unfortunate similarity is that these operations typically break hard links, disconnecting the file name you visited from any alternate names for the same file. This has nothing to do with Emacs---the version control system does it. @node Interlocking @subsection Protection against Simultaneous Editing @cindex file dates @cindex simultaneous editing Simultaneous editing occurs when two users visit the same file, both make changes, and then both save them. If nobody were informed that this was happening, whichever user saved first would later find that his changes were lost. On some systems, Emacs notices immediately when the second user starts to change the file, and issues an immediate warning. On all systems, Emacs checks when you save the file, and warns if you are about to overwrite another user's changes. You can prevent loss of the other user's work by taking the proper corrective action instead of saving the file. @findex ask-user-about-lock @cindex locking files When you make the first modification in an Emacs buffer that is visiting a file, Emacs records that the file is @dfn{locked} by you. (It does this by creating a symbolic link in the same directory with a different name.) Emacs removes the lock when you save the changes. The idea is that the file is locked whenever an Emacs buffer visiting it has unsaved changes. @cindex collision If you begin to modify the buffer while the visited file is locked by someone else, this constitutes a @dfn{collision}. When Emacs detects a collision, it asks you what to do, by calling the Lisp function @code{ask-user-about-lock}. You can redefine this function for the sake of customization. The standard definition of this function asks you a question and accepts three possible answers: @table @kbd @item s Steal the lock. Whoever was already changing the file loses the lock, and you gain the lock. @item p Proceed. Go ahead and edit the file despite its being locked by someone else. @item q Quit. This causes an error (@code{file-locked}) and the modification you were trying to make in the buffer does not actually take place. @end table Note that locking works on the basis of a file name; if a file has multiple names, Emacs does not realize that the two names are the same file and cannot prevent two users from editing it simultaneously under different names. However, basing locking on names means that Emacs can interlock the editing of new files that will not really exist until they are saved. Some systems are not configured to allow Emacs to make locks, and there are cases where lock files cannot be written. In these cases, Emacs cannot detect trouble in advance, but it still can detect the collision when you try to save a file and overwrite someone else's changes. If Emacs or the operating system crashes, this may leave behind lock files which are stale. So you may occasionally get warnings about spurious collisions. When you determine that the collision is spurious, just use @kbd{p} to tell Emacs to go ahead anyway. Every time Emacs saves a buffer, it first checks the last-modification date of the existing file on disk to verify that it has not changed since the file was last visited or saved. If the date does not match, it implies that changes were made in the file in some other way, and these changes are about to be lost if Emacs actually does save. To prevent this, Emacs prints a warning message and asks for confirmation before saving. Occasionally you will know why the file was changed and know that it does not matter; then you can answer @kbd{yes} and proceed. Otherwise, you should cancel the save with @kbd{C-g} and investigate the situation. The first thing you should do when notified that simultaneous editing has already taken place is to list the directory with @kbd{C-u C-x C-d} (@pxref{Directories}). This shows the file's current author. You should attempt to contact him to warn him not to continue editing. Often the next step is to save the contents of your Emacs buffer under a different name, and use @code{diff} to compare the two files.@refill @node Reverting @section Reverting a Buffer @findex revert-buffer @cindex drastic changes If you have made extensive changes to a file and then change your mind about them, you can get rid of them by reading in the previous version of the file. To do this, use @kbd{M-x revert-buffer}, which operates on the current buffer. Since reverting a buffer unintentionally could lose a lot of work, you must confirm this command with @kbd{yes}. @code{revert-buffer} keeps point at the same distance (measured in characters) from the beginning of the file. If the file was edited only slightly, you will be at approximately the same piece of text after reverting as before. If you have made drastic changes, the same value of point in the old file may address a totally different piece of text. Reverting marks the buffer as ``not modified'' until another change is made. Some kinds of buffers whose contents reflect data bases other than files, such as Dired buffers, can also be reverted. For them, reverting means recalculating their contents from the appropriate data base. Buffers created explicitly with @kbd{C-x b} cannot be reverted; @code{revert-buffer} reports an error when asked to do so. @vindex revert-without-query When you edit a file that changes automatically and frequently---for example, a log of output from a process that continues to run---it may be useful for Emacs to revert the file without querying you, whenever you visit the file again with @kbd{C-x C-f}. To request this behavior, set the variable @code{revert-without-query} to a list of regular expressions. When a file name matches one of these regular expressions, @code{find-file} and @code{revert-buffer} will revert it automatically if it has changed---provided the buffer itself is not modified. (If you have edited the text, it would be wrong to discard your changes.) @node Auto Save @section Auto-Saving: Protection Against Disasters @cindex Auto Save mode @cindex mode, Auto Save @cindex crashes Emacs saves all the visited files from time to time (based on counting your keystrokes) without being asked. This is called @dfn{auto-saving}. It prevents you from losing more than a limited amount of work if the system crashes. When Emacs determines that it is time for auto-saving, each buffer is considered, and is auto-saved if auto-saving is turned on for it and it has been changed since the last time it was auto-saved. The message @samp{Auto-saving...} is displayed in the echo area during auto-saving, if any files are actually auto-saved. Errors occurring during auto-saving are caught so that they do not interfere with the execution of commands you have been typing. @menu * Files: Auto Save Files. The file where auto-saved changes are actually made until you save the file. * Control: Auto Save Control. Controlling when and how often to auto-save. * Recover:: Recovering text from auto-save files. @end menu @node Auto Save Files @subsection Auto-Save Files Auto-saving does not normally save in the files that you visited, because it can be very undesirable to save a program that is in an inconsistent state when you have made half of a planned change. Instead, auto-saving is done in a different file called the @dfn{auto-save file}, and the visited file is changed only when you request saving explicitly (such as with @kbd{C-x C-s}). Normally, the auto-save file name is made by appending @samp{#} to the front and rear of the visited file name. Thus, a buffer visiting file @file{foo.c} is auto-saved in a file @file{#foo.c#}. Most buffers that are not visiting files are auto-saved only if you request it explicitly; when they are auto-saved, the auto-save file name is made by appending @samp{#%} to the front and @samp{#} to the rear of buffer name. For example, the @samp{*mail*} buffer in which you compose messages to be sent is auto-saved in a file named @file{#%*mail*#}. Auto-save file names are made this way unless you reprogram parts of Emacs to do something different (the functions @code{make-auto-save-file-name} and @code{auto-save-file-name-p}). The file name to be used for auto-saving in a buffer is calculated when auto-saving is turned on in that buffer. When you delete a substantial part of the text in a large buffer, auto save turns off temporarily in that buffer. This is because if you deleted the text unintentionally, you might find the auto-save file more useful if it contains the deleted text. To reenable auto-saving after this happens, save the buffer with @kbd{C-x C-s}, or use @kbd{C-u 1 M-x auto-save}. @vindex auto-save-visited-file-name If you want auto-saving to be done in the visited file, set the variable @code{auto-save-visited-file-name} to be non-@code{nil}. In this mode, there is really no difference between auto-saving and explicit saving. @vindex delete-auto-save-files A buffer's auto-save file is deleted when you save the buffer in its visited file. To inhibit this, set the variable @code{delete-auto-save-files} to @code{nil}. Changing the visited file name with @kbd{C-x C-w} or @code{set-visited-file-name} renames any auto-save file to go with the new visited name. @node Auto Save Control @subsection Controlling Auto-Saving @vindex auto-save-default @findex auto-save-mode Each time you visit a file, auto-saving is turned on for that file's buffer if the variable @code{auto-save-default} is non-@code{nil} (but not in batch mode; @pxref{Entering Emacs}). The default for this variable is @code{t}, so auto-saving is the usual practice for file-visiting buffers. Auto-saving can be turned on or off for any existing buffer with the command @kbd{M-x auto-save-mode}. Like other minor mode commands, @kbd{M-x auto-save-mode} turns auto-saving on with a positive argument, off with a zero or negative argument; with no argument, it toggles. @vindex auto-save-interval Emacs does auto-saving periodically based on counting how many characters you have typed since the last time auto-saving was done. The variable @code{auto-save-interval} specifies how many characters there are between auto-saves. By default, it is 300. @vindex auto-save-timeout Auto-saving also takes place when you stop typing for a while. The variable @code{auto-save-timeout} says how many seconds Emacs should wait before it does an auto save (and perhaps also a garbage collection). (The actual time period is longer if the current buffer is long; this is a heuristic which aims to keep out of your way when you are editing long buffers, in which auto-save takes an appreciable amount of time.) Auto-saving during idle periods accomplishes two things: first, it makes sure all your work is saved if you go away from the terminal for a while; second, it may avoid some auto-saving while you are actually typing. Emacs also does auto-saving whenever it gets a fatal error. This includes killing the Emacs job with a shell command such as @samp{kill %emacs}, or disconnecting a phone line or network connection. @findex do-auto-save You can request an auto-save explicitly with the command @kbd{M-x do-auto-save}. @node Recover @subsection Recovering Data from Auto-Saves @findex recover-file You can use the contents of an auto-save file to recover from a loss of data with the command @kbd{M-x recover-file @key{RET} @var{file} @key{RET}}. This visits @var{file} and then (after your confirmation) restores the contents from its auto-save file @file{#@var{file}#}. You can then save with @kbd{C-x C-s} to put the recovered text into @var{file} itself. For example, to recover file @file{foo.c} from its auto-save file @file{#foo.c#}, do:@refill @example M-x recover-file @key{RET} foo.c @key{RET} yes @key{RET} C-x C-s @end example Before asking for confirmation, @kbd{M-x recover-file} displays a directory listing describing the specified file and the auto-save file, so you can compare their sizes and dates. If the auto-save file is older, @kbd{M-x recover-file} does not offer to read it. @findex recover-session If Emacs or the computer crashes, you can recover all the files you were editing from their auto save files with the command @kbd{M-x recover-session}. This first shows you a list of recorded interrupted sessions. Move point to the one you choose, and type @kbd{C-c C-c}. Then @code{recover-session} asks about each of the files that were being edited during that session, asking whether to recover that file. If you answer @kbd{y}, it calls @code{recover-file}, which works in its normal fashion. It shows the dates of the original file and its auto-save file, and asks once again whether to recover that file. When @code{recover-session} is done, the files you've chosen to recover are present in Emacs buffers. You should then save them. Only this---saving them---updates the files themselves. @vindex auto-save-list-file-prefix Interrupted sessions are recorded for later recovery in files named @file{~/.saves-@var{pid}-@var{hostname}}. The @samp{~/.saves} portion of these names comes from the value of @code{auto-save-list-file-prefix}. You can arrange to record sessions in a different place by setting that variable in your @file{.emacs} file, but you'll have to redefine @code{recover-session} as well to make it look in the new place. If you set @code{auto-save-list-file-prefix} to @code{nil} in your @file{.emacs} file, sessions are not recorded for recovery. @node File Aliases @section File Name Aliases Symbolic links and hard links both make it possible for several file names to refer to the same file. Hard links are alternate names that refer directly to the file; all the names are equally valid, and no one of them is preferred. By contrast, a symbolic link is a kind of defined alias: when @file{foo} is a symbolic link to @file{bar}, you can use either name to refer to the file, but @file{bar} is the real name, while @file{foo} is just an alias. More complex cases occur when symbolic links point to directories. If you visit two names for the same file, normally Emacs makes two different buffers, but it warns you about the situation. @vindex find-file-existing-other-name If you wish to avoid visiting the same file in two buffers under different names, set the variable @code{find-file-existing-other-name} to a non-@code{nil} value. Then @code{find-file} uses the existing buffer visiting the file, no matter which of the file's names you specify. @vindex find-file-visit-truename @cindex truenames of files @cindex file truenames If the variable @code{find-file-visit-truename} is non-@code{nil}, then the file name recorded for a buffer is the file's @dfn{truename} (made by replacing all symbolic links with their target names), rather than the name you specify. Setting @code{find-file-visit-truename} also implies the effect of @code{find-file-existing-other-name}. @node Version Control @section Version Control @cindex version control @dfn{Version control systems} are packages that can record multiple versions of a source file, usually storing the unchanged parts of the file just once. Version control systems also record history information such as the creation time of each version, who created it, and a description of what was changed in that version. The Emacs version control interface is called VC. Its commands work with three version control systems---RCS, CVS and SCCS. The GNU project recommends RCS and CVS, which are free software and available from the Free Software Foundation. @menu * Introduction to VC:: How version control works in general. * VC Mode Line:: How the mode line shows version control status. * Basic VC Editing:: How to edit a file under version control. * Old Versions:: Examining and comparing old versions. * Secondary VC Commands:: The commands used a little less frequently. * Branches:: Multiple lines of development. * Snapshots:: Sets of file versions treated as a unit. * Miscellaneous VC:: Various other commands and features of VC. * Customizing VC:: Variables that change VC's behavior. @end menu @node Introduction to VC @subsection Introduction to Version Control VC allows you to use a version control system from within Emacs, integrating the version control operations smoothly with editing. VC provides a uniform interface to version control, so that regardless of which version control system is in use, you can use it the same way. This section provides a general overview of version control, and describes the version control systems that VC supports. You can skip this section if you are already familiar with the version control system you want to use. @menu * Version Systems:: Supported version control back-end systems. * VC Concepts:: Words and concepts related to version control. @end menu @node Version Systems @subsubsection Supported Version Control Systems @cindex RCS @cindex back end (version control) VC currently works with three different version control systems or ``back ends'': RCS, CVS, and SCCS. RCS is a free version control system that is available from the Free Software Foundation. It is perhaps the most mature of the supported back ends, and the VC commands are conceptually closest to RCS. Almost everything you can do with RCS can be done through VC. @cindex CVS CVS is built on top of RCS, and extends the features of RCS, allowing for more sophisticated release management, and concurrent multi-user development. VC supports basic editing operations under CVS, but for some less common tasks you still need to call CVS from the command line. Note also that before using CVS you must set up a repository, which is a subject too complex to treat here. @cindex SCCS SCCS is a proprietary but widely used version control system. In terms of capabilities, it is the weakest of the three that VC supports. VC compensates for certain features missing in SCCS (snapshots, for example) by implementing them itself, but some other VC features, such as multiple branches, are not available with SCCS. You should use SCCS only if for some reason you cannot use RCS. @node VC Concepts @subsubsection Concepts of Version Control @cindex master file @cindex registered file When a file is under version control, we also say that it is @dfn{registered} in the version control system. Each registered file has a corresponding @dfn{master file} which represents the file's present state plus its change history---enough to reconstruct the current version or any earlier version. Usually the master file also records a @dfn{log entry} for each version, describing in words what was changed in that version. @cindex work file @cindex checking out files The file that is maintained under version control is sometimes called the @dfn{work file} corresponding to its master file. You edit the work file and make changes in it, as you would with an ordinary file. (With SCCS and RCS, you must @dfn{lock} the file before you start to edit it.) After you are done with a set of changes, you @dfn{check the file in}, which records the changes in the master file, along with a log entry for them. With CVS, there are usually multiple work files corresponding to a single master file---often each user has his own copy. It is also possible to use RCS in this way, but this is not the usual way to use RCS. @cindex locking and version control A version control system typically has some mechanism to coordinate between users who want to change the same file. One method is @dfn{locking} (analogous to the locking that Emacs uses to detect simultaneous editing of a file, but distinct from it). The other method is to merge your changes with other people's changes when you check them in. With version control locking, work files are normally read-only so that you cannot change them. You ask the version control system to make a work file writable for you by locking it; only one user can do this at any given time. When you check in your changes, that unlocks the file, making the work file read-only again. This allows other users to lock the file to make further changes. SCCS always uses locking, and RCS normally does. The other alternative for RCS is to let each user modify the work file at any time. In this mode, locking is not required, but it is permitted; check-in is still the way to record a new version. CVS normally allows each user to modify his own copy of the work file at any time, but requires merging with changes from other users at check-in time. However, CVS can also be set up to require locking. (@pxref{Backend Options}). @node VC Mode Line @subsection Version Control and the Mode Line When you visit a file that is under version control, Emacs indicates this on the mode line. For example, @samp{RCS-1.3} says that RCS is used for that file, and the current version is 1.3. The character between the back-end name and the version number indicates the version control status of the file. @samp{-} means that the work file is not locked (if locking is in use), or not modified (if locking is not in use). @samp{:} indicates that the file is locked, or that it is modified. If the file is locked by some other user (for instance, @samp{jim}), that is displayed as @samp{RCS:jim:1.3}. @node Basic VC Editing @subsection Basic Editing under Version Control The principal VC command is an all-purpose command that performs either locking or check-in, depending on the situation. @table @kbd @item C-x C-q @itemx C-x v v Perform the next logical version control operation on this file. @end table @findex vc-next-action @findex vc-toggle-read-only @kindex C-x v v @kindex C-x C-q @r{(Version Control)} Strictly speaking, the command for this job is @code{vc-next-action}, bound to @kbd{C-x v v}. However, the normal meaning of @kbd{C-x C-q} is to make a read-only buffer writable, or vice versa; we have extended it to do the same job properly for files managed by version control, by performing the appropriate version control operations. When you type @kbd{C-x C-q} on a registered file, it acts like @kbd{C-x v v}. The precise action of this command depends on the state of the file, and whether the version control system uses locking or not. SCCS and RCS normally use locking; CVS normally does not use locking. @menu * VC with Locking:: RCS in its default mode, SCCS, and optionally CVS. * Without Locking:: Without locking: default mode for CVS. * Log Buffer:: Features available in log entry buffers. @end menu @node VC with Locking @subsubsection Basic Version Control with Locking If locking is used for the file (as with SCCS, and RCS in its default mode), @kbd{C-x C-q} can either lock a file or check it in: @itemize @bullet @item If the file is not locked, @kbd{C-x C-q} locks it, and makes it writable so that you can change it. @item If the file is locked by you, and contains changes, @kbd{C-x C-q} checks in the changes. In order to do this, it first reads the log entry for the new version. @xref{Log Buffer}. @item If the file is locked by you, but you have not changed it since you locked it, @kbd{C-x C-q} releases the lock and makes the file read-only again. @item If the file is locked by some other user, @kbd{C-x C-q} asks you whether you want to ``steal the lock'' from that user. If you say yes, the file becomes locked by you, but a message is sent to the person who had formerly locked the file, to inform him of what has happened. @end itemize These rules also apply when you use CVS in locking mode, except that there is no such thing as stealing a lock. @node Without Locking @subsubsection Basic Version Control without Locking When there is no locking---the default for CVS---work files are always writable; you do not need to do anything before you begin to edit a file. The status indicator on the mode line is @samp{-} if the file is unmodified; it flips to @samp{:} as soon as you save any changes in the work file. Here is what @kbd{C-x C-q} does when using CVS: @itemize @bullet @item If some other user has checked in changes into the master file, Emacs asks you whether you want to merge those changes into your own work file (@pxref{Merging}). You must do this before you can check in your own changes. @item If there are no new changes in the master file, but you have made modifications in your work file, @kbd{C-x C-q} checks in your changes. In order to do this, it first reads the log entry for the new version. @xref{Log Buffer}. @item If the file is not modified, the @kbd{C-x C-q} does nothing. @end itemize These rules also apply when you use RCS in the mode that does not require locking, except that automatic merging of changes from the master file is not implemented. Unfortunately, this means that nothing informs you if another user has checked in changes in the same file since you began editing it, and when this happens, his changes will be effectively removed when you check in your version (though they will remain in the master file, so they will not be entirely lost). You must therefore verify the current version is unchanged, before you check in your changes. We hope to eliminate this risk and provide automatic merging with RCS in a future Emacs version. In addition, locking is possible with RCS even in this mode, although it is not required; @kbd{C-x C-q} with an unmodified file locks the file, just as it does with RCS in its normal (locking) mode. @node Log Buffer @subsubsection Features of the Log Entry Buffer When you check in changes, @kbd{C-x C-q} first reads a log entry. It pops up a buffer called @samp{*VC-Log*} for you to enter the log entry. When you are finished, type @kbd{C-c C-c} in the @samp{*VC-Log*} buffer. That is when check-in really happens. To abort check-in, just @strong{don't} type @kbd{C-c C-c} in that buffer. You can switch buffers and do other editing. As long as you don't try to check in another file, the entry you were editing remains in the @samp{*VC-Log*} buffer, and you can go back to that buffer at any time to complete the check-in. If you change several source files for the same reason, it is often convenient to specify the same log entry for many of the files. To do this, use the history of previous log entries. The commands @kbd{M-n}, @kbd{M-p}, @kbd{M-s} and @kbd{M-r} for doing this work just like the minibuffer history commands (except that these versions are used outside the minibuffer). @vindex vc-log-mode-hook Each time you check in a file, the log entry buffer is put into VC Log mode, which involves running two hooks: @code{text-mode-hook} and @code{vc-log-mode-hook}. @xref{Hooks}. @node Old Versions @subsection Examining And Comparing Old Versions One of the convenient features of version control is the ability to examine any version of a file, or compare two versions. @table @kbd @item C-x v ~ @var{version} @key{RET} Examine version @var{version} of the visited file, in a buffer of its own. @item C-x v = Compare the current buffer contents with the latest checked-in version of the file. @item C-u C-x v = @var{file} @key{RET} @var{oldvers} @key{RET} @var{newvers} @key{RET} Compare the specified two versions of @var{file}. @item C-x v g Display the result of the CVS annotate command using colors. @end table @findex vc-version-other-window @kindex C-x v ~ To examine an old version in toto, visit the file and then type @kbd{C-x v ~ @var{version} @key{RET}} (@code{vc-version-other-window}). This puts the text of version @var{version} in a file named @file{@var{filename}.~@var{version}~}, and visits it in its own buffer in a separate window. (In RCS, you can also select an old version and create a branch from it. @xref{Branches}.) @findex vc-diff @kindex C-x v = But usually it is more convenient to compare two versions of the file, with the command @kbd{C-x v =} (@code{vc-diff}). Plain @kbd{C-x v =} compares the current buffer contents (saving them in the file if necessary) with the last checked-in version of the file. @kbd{C-u C-x v =}, with a numeric argument, reads a file name and two version numbers, then compares those versions of the specified file. If you supply a directory name instead of the name of a registered file, this command compares the two specified versions of all registered files in that directory and its subdirectories. You can specify a checked-in version by its number; an empty input specifies the current contents of the work file (which may be different from all the checked-in versions). You can also specify a snapshot name (@pxref{Snapshots}) instead of one or both version numbers. This command works by running the @code{diff} utility, getting the options from the variable @code{diff-switches}. It displays the output in a special buffer in another window. Unlike the @kbd{M-x diff} command, @kbd{C-x v =} does not try to locate the changes in the old and new versions. This is because normally one or both versions do not exist as files when you compare them; they exist only in the records of the master file. @xref{Comparing Files}, for more information about @kbd{M-x diff}. @findex vc-annotate @kindex C-x v g For CVS-controlled files, you can display the result of the CVS annotate command, using colors to enhance the visual appearance. Use the command @kbd{M-x vc-annotate} to do this. Red means new, blue means old, and intermediate colors indicate intermediate ages. A prefix argument @var{n} specifies a stretch factor for the time scale; it makes each color cover a period @var{n} times as long. @node Secondary VC Commands @subsection The Secondary Commands of VC This section explains the secondary commands of VC; those that you might use once a day. @menu * Registering:: Putting a file under version control. * VC Status:: Viewing the VC status of files. * VC Undo:: Cancelling changes before or after check-in. * VC Dired Mode:: Listing files managed by version control. * VC Dired Commands:: Commands to use in a VC Dired buffer. @end menu @node Registering @subsubsection Registering a File for Version Control @kindex C-x v i @findex vc-register You can put any file under version control by simply visiting it, and then typing @w{@kbd{C-x v i}} (@code{vc-register}). @table @kbd @item C-x v i Register the visited file for version control. @end table @vindex vc-default-back-end To register the file, Emacs must choose which version control system to use for it. You can specify your choice explicitly by setting @code{vc-default-back-end} to @code{RCS}, @code{CVS} or @code{SCCS}. Otherwise, if there is a subdirectory named @file{RCS}, @file{SCCS}, or @file{CVS}, Emacs uses the corresponding version control system. In the absence of any specification, the default choice is RCS if RCS is installed, otherwise SCCS. If locking is in use, @kbd{C-x v i} leaves the file unlocked and read-only. Type @kbd{C-x C-q} if you wish to start editing it. After registering a file with CVS, you must subsequently commit the initial version by typing @kbd{C-x C-q}. @vindex vc-default-init-version The initial version number for a newly registered file is 1.1, by default. You can specify a different default by setting the variable @code{vc-default-init-version}, or you can give @kbd{C-x v i} a numeric argument; then it reads the initial version number for this particular file using the minibuffer. @vindex vc-initial-comment If @code{vc-initial-comment} is non-@code{nil}, @kbd{C-x v i} reads an initial comment to describe the purpose of this source file. Reading the initial comment works like reading a log entry (@pxref{Log Buffer}). @node VC Status @subsubsection VC Status Commands @table @kbd @item C-x v l Display version control state and change history. @end table @kindex C-x v l @findex vc-print-log To view the detailed version control status and history of a file, type @kbd{C-x v l} (@code{vc-print-log}). It displays the history of changes to the current file, including the text of the log entries. The output appears in a separate window. @node VC Undo @subsubsection Undoing Version Control Actions @table @kbd @item C-x v u Revert the buffer and the file to the last checked-in version. @item C-x v c Remove the last-entered change from the master for the visited file. This undoes your last check-in. @end table @kindex C-x v u @findex vc-revert-buffer If you want to discard your current set of changes and revert to the last version checked in, use @kbd{C-x v u} (@code{vc-revert-buffer}). This leaves the file unlocked; if locking is in use, you must first lock the file again before you change it again. @kbd{C-x v u} requires confirmation, unless it sees that you haven't made any changes since the last checked-in version. @kbd{C-x v u} is also the command to unlock a file if you lock it and then decide not to change it. @kindex C-x v c @findex vc-cancel-version To cancel a change that you already checked in, use @kbd{C-x v c} (@code{vc-cancel-version}). This command discards all record of the most recent checked-in version. @kbd{C-x v c} also offers to revert your work file and buffer to the previous version (the one that precedes the version that is deleted). If you answer @kbd{no}, VC keeps your changes in the buffer, and locks the file. The no-revert option is useful when you have checked in a change and then discover a trivial error in it; you can cancel the erroneous check-in, fix the error, and check the file in again. When @kbd{C-x v c} does not revert the buffer, it unexpands all version control headers in the buffer instead (@pxref{Version Headers}). This is because the buffer no longer corresponds to any existing version. If you check it in again, the check-in process will expand the headers properly for the new version number. However, it is impossible to unexpand the RCS @samp{@w{$}Log$} header automatically. If you use that header feature, you have to unexpand it by hand---by deleting the entry for the version that you just canceled. Be careful when invoking @kbd{C-x v c}, as it is easy to lose a lot of work with it. To help you be careful, this command always requires confirmation with @kbd{yes}. Note also that this command is disabled under CVS, because canceling versions is very dangerous and discouraged with CVS. @node VC Dired Mode @subsubsection Dired under VC @kindex C-x v d @findex vc-directory When you are working on a large program, it is often useful to find out which files have changed within an entire directory tree, or to view the status of all files under version control at once, and to perform version control operations on collections of files. You can use the command @kbd{C-x v d} (@code{vc-directory}) to make a directory listing that includes only files relevant for version control. @vindex vc-dired-terse-display @kbd{C-x v d} creates a buffer which uses VC Dired Mode. This looks much like an ordinary Dired buffer (@pxref{Dired}); however, normally it shows only the noteworthy files (those locked or not up-to-date). This is called @dfn{terse display}. If you set the variable @code{vc-dired-terse-display} to @code{nil}, then VC Dired shows all relevant files---those managed under version control, plus all subdirectories (@dfn{full display}). The command @kbd{v t} in a VC Dired buffer toggles between terse display and full display (@pxref{VC Dired Commands}). @vindex vc-dired-recurse By default, VC Dired produces a recursive listing of noteworthy or relevant files at or below the given directory. You can change this by setting the variable @code{vc-dired-recurse} to @code{nil}; then VC Dired shows only the files in the given directory. The line for an individual file shows the version control state in the place of the hard link count, owner, group, and size of the file. If the file is unmodified, in sync with the master file, the version control state shown is blank. Otherwise it consists of text in parentheses. Under RCS and SCCS, the name of the user locking the file is shown; under CVS, an abbreviated version of the @samp{cvs status} output is used. Here is an example using RCS: @smallexample @group /home/jim/project: -rw-r--r-- (jim) Apr 2 23:39 file1 -r--r--r-- Apr 5 20:21 file2 @end group @end smallexample @noindent The files @samp{file1} and @samp{file2} are under version control, @samp{file1} is locked by user jim, and @samp{file2} is unlocked. Here is an example using CVS: @smallexample @group /home/joe/develop: -rw-r--r-- (modified) Aug 2 1997 file1.c -rw-r--r-- Apr 4 20:09 file2.c -rw-r--r-- (merge) Sep 13 1996 file3.c @end group @end smallexample Here @samp{file1.c} is modified with respect to the repository, and @samp{file2.c} is not. @samp{file3.c} is modified, but other changes have also been checked in to the repository---you need to merge them with the work file before you can check it in. @vindex vc-directory-exclusion-list When VC Dired displays subdirectories (in the ``full'' display mode), it omits some that should never contain any files under version control. By default, this includes Version Control subdirectories such as @samp{RCS} and @samp{CVS}; you can customize this by setting the variable @code{vc-directory-exclusion-list}. You can fine-tune VC Dired's format by typing @kbd{C-u C-x v d}---as in ordinary Dired, that allows you to specify additional switches for the @samp{ls} command. @node VC Dired Commands @subsubsection VC Dired Commands All the usual Dired commands work normally in VC Dired mode, except for @kbd{v}, which is redefined as the version control prefix. You can invoke VC commands such as @code{vc-diff} and @code{vc-print-log} by typing @kbd{v =}, or @kbd{v l}, and so on. Most of these commands apply to the file name on the current line. The command @kbd{v v} (@code{vc-next-action}) operates on all the marked files, so that you can lock or check in several files at once. If it operates on more than one file, it handles each file according to its current state; thus, it might lock one file, but check in another file. This could be confusing; it is up to you to avoid confusing behavior by marking a set of files that are in a similar state. If any files call for check-in, @kbd{v v} reads a single log entry, then uses it for all the files being checked in. This is convenient for registering or checking in several files at once, as part of the same change. @findex vc-dired-toggle-terse-mode @findex vc-dired-mark-locked You can toggle between terse display (only locked files, or files not up-to-date) and full display at any time by typing @kbd{v t} @code{vc-dired-toggle-terse-mode}. There is also a special command @kbd{* l} (@code{vc-dired-mark-locked}), which marks all files currently locked (or, with CVS, all files not up-to-date). Thus, typing @kbd{* l t k} is another way to delete from the buffer all files except those currently locked. @node Branches @subsection Multiple Branches of a File @cindex branch (version control) @cindex trunk (version control) One use of version control is to maintain multiple ``current'' versions of a file. For example, you might have different versions of a program in which you are gradually adding various unfinished new features. Each such independent line of development is called a @dfn{branch}. VC allows you to create branches, switch between different branches, and merge changes from one branch to another. Please note, however, that branches are only supported for RCS at the moment. A file's main line of development is usually called the @dfn{trunk}. The versions on the trunk are normally numbered 1.1, 1.2, 1.3, etc. At any such version, you can start an independent branch. A branch starting at version 1.2 would have version number 1.2.1.1, and consecutive versions on this branch would have numbers 1.2.1.2, 1.2.1.3, 1.2.1.4, and so on. If there is a second branch also starting at version 1.2, it would consist of versions 1.2.2.1, 1.2.2.2, 1.2.2.3, etc. @cindex head version If you omit the final component of a version number, that is called a @dfn{branch number}. It refers to the highest existing version on that branch---the @dfn{head version} of that branch. The branches in the example above have branch numbers 1.2.1 and 1.2.2. @menu * Switching Branches:: How to get to another existing branch. * Creating Branches:: How to start a new branch. * Merging:: Transferring changes between branches. * Multi-User Branching:: Multiple users working at multiple branches in parallel. @end menu @node Switching Branches @subsubsection Switching between Branches To switch between branches, type @kbd{C-u C-x C-q} and specify the version number you want to select. This version is then visited @emph{unlocked} (write-protected), so you can examine it before locking it. Switching branches in this way is allowed only when the file is not locked. You can omit the minor version number, thus giving only the branch number; this takes you to the head version on the chosen branch. If you only type @key{RET}, Emacs goes to the highest version on the trunk. After you have switched to any branch (including the main branch), you stay on it for subsequent VC commands, until you explicitly select some other branch. @node Creating Branches @subsubsection Creating New Branches To create a new branch from a head version (one that is the latest in the branch that contains it), first select that version if necessary, lock it with @kbd{C-x C-q}, and make whatever changes you want. Then, when you check in the changes, use @kbd{C-u C-x C-q}. This lets you specify the version number for the new version. You should specify a suitable branch number for a branch starting at the current version. For example, if the current version is 2.5, the branch number should be 2.5.1, 2.5.2, and so on, depending on the number of existing branches at that point. To create a new branch at an older version (one that is no longer the head of a branch), first select that version (@pxref{Switching Branches}), then lock it with @kbd{C-x C-q}. You'll be asked to confirm, when you lock the old version, that you really mean to create a new branch---if you say no, you'll be offered a chance to lock the latest version instead. Then make your changes and type @kbd{C-x C-q} again to check in a new version. This automatically creates a new branch starting from the selected version. You need not specially request a new branch, because that's the only way to add a new version at a point that is not the head of a branch. After the branch is created, you ``stay'' on it. That means that subsequent check-ins create new versions on that branch. To leave the branch, you must explicitly select a different version with @kbd{C-u C-x C-q}. To transfer changes from one branch to another, use the merge command, described in the next section. @node Merging @subsubsection Merging Branches @cindex merging changes When you have finished the changes on a certain branch, you will often want to incorporate them into the file's main line of development (the trunk). This is not a trivial operation, because development might also have proceeded on the trunk, so that you must @dfn{merge} the changes into a file that has already been changed otherwise. VC allows you to do this (and other things) with the @code{vc-merge} command. @table @kbd @item C-x v m (vc-merge) Merge changes into the work file. @end table @kindex C-x v m @findex vc-merge @kbd{C-x v m} (@code{vc-merge}) takes a set of changes and merges it into the current version of the work file. It first asks you for a branch number or a pair of version numbers in the minibuffer. Then it finds the changes from that branch, or between the two versions you specified, and merges them into the current version of the current file. As an example, suppose that you have finished a certain feature on branch 1.3.1. In the meantime, development on the trunk has proceeded to version 1.5. To merge the changes from the branch to the trunk, first go to the head version of the trunk, by typing @kbd{C-u C-x C-q RET}. Version 1.5 is now current. If locking is used for the file, type @kbd{C-x C-q} to lock version 1.5 so that you can change it. Next, type @kbd{C-x v m 1.3.1 RET}. This takes the entire set of changes on branch 1.3.1 (relative to version 1.3, where the branch started, up to the last version on the branch) and merges it into the current version of the work file. You can now check in the changed file, thus creating version 1.6 containing the changes from the branch. It is possible to do further editing after merging the branch, before the next check-in. But it is usually wiser to check in the merged version, then lock it and make the further changes. This will keep a better record of the history of changes. @cindex conflicts @cindex resolving conflicts When you merge changes into a file that has itself been modified, the changes might overlap. We call this situation a @dfn{conflict}, and reconciling the conflicting changes is called @dfn{resolving a conflict}. Whenever conflicts occur during merging, VC detects them, tells you about them in the echo area, and asks whether you want help in merging. If you say yes, it starts an Ediff session (@pxref{Top, Ediff, Ediff, ediff, The Ediff Manual}). If you say no, the conflicting changes are both inserted into the file, surrounded by @dfn{conflict markers}. The example below shows how a conflict region looks; the file is called @samp{name} and the current master file version with user B's changes in it is 1.11. @c @w here is so CVS won't think this is a conflict. @smallexample @group @w{<}<<<<<< name @var{User A's version} ======= @var{User B's version} @w{>}>>>>>> 1.11 @end group @end smallexample @cindex vc-resolve-conflicts Then you can resolve the conflicts by editing the file manually. Or you can type @code{M-x vc-resolve-conflicts} after visiting the file. This starts an Ediff session, as described above. @node Multi-User Branching @subsubsection Multi-User Branching It is often useful for multiple developers to work simultaneously on different branches of a file. CVS allows this by default; for RCS, it is possible if you create multiple source directories. Each source directory should have a link named @file{RCS} which points to a common directory of RCS master files. Then each source directory can have its own choice of selected versions, but all share the same common RCS records. This technique works reliably and automatically, provided that the source files contain RCS version headers (@pxref{Version Headers}). The headers enable Emacs to be sure, at all times, which version number is present in the work file. If the files do not have version headers, you must instead tell Emacs explicitly in each session which branch you are working on. To do this, first find the file, then type @kbd{C-u C-x C-q} and specify the correct branch number. This ensures that Emacs knows which branch it is using during this particular editing session. @node Snapshots @subsection Snapshots @cindex snapshots and version control A @dfn{snapshot} is a named set of file versions (one for each registered file) that you can treat as a unit. One important kind of snapshot is a @dfn{release}, a (theoretically) stable version of the system that is ready for distribution to users. @menu * Making Snapshots:: The snapshot facilities. * Snapshot Caveats:: Things to be careful of when using snapshots. @end menu @node Making Snapshots @subsubsection Making and Using Snapshots There are two basic commands for snapshots; one makes a snapshot with a given name, the other retrieves a named snapshot. @table @code @kindex C-x v s @findex vc-create-snapshot @item C-x v s @var{name} @key{RET} Define the last saved versions of every registered file in or under the current directory as a snapshot named @var{name} (@code{vc-create-snapshot}). @kindex C-x v r @findex vc-retrieve-snapshot @item C-x v r @var{name} @key{RET} For all registered files at or below the current directory level, select whatever versions correspond to the snapshot @var{name} (@code{vc-retrieve-snapshot}). This command reports an error if any files are locked at or below the current directory, without changing anything; this is to avoid overwriting work in progress. @end table A snapshot uses a very small amount of resources---just enough to record the list of file names and which version belongs to the snapshot. Thus, you need not hesitate to create snapshots whenever they are useful. You can give a snapshot name as an argument to @kbd{C-x v =} or @kbd{C-x v ~} (@pxref{Old Versions}). Thus, you can use it to compare a snapshot against the current files, or two snapshots against each other, or a snapshot against a named version. @node Snapshot Caveats @subsubsection Snapshot Caveats @cindex named configurations (RCS) VC's snapshot facilities are modeled on RCS's named-configuration support. They use RCS's native facilities for this, so under VC snapshots made using RCS are visible even when you bypass VC. @c worded verbosely to avoid overfull hbox. For SCCS, VC implements snapshots itself. The files it uses contain name/file/version-number triples. These snapshots are visible only through VC. A snapshot is a set of checked-in versions. So make sure that all the files are checked in and not locked when you make a snapshot. File renaming and deletion can create some difficulties with snapshots. This is not a VC-specific problem, but a general design issue in version control systems that no one has solved very well yet. If you rename a registered file, you need to rename its master along with it (the command @code{vc-rename-file} does this automatically). If you are using SCCS, you must also update the records of the snapshot, to mention the file by its new name (@code{vc-rename-file} does this, too). An old snapshot that refers to a master file that no longer exists under the recorded name is invalid; VC can no longer retrieve it. It would be beyond the scope of this manual to explain enough about RCS and SCCS to explain how to update the snapshots by hand. Using @code{vc-rename-file} makes the snapshot remain valid for retrieval, but it does not solve all problems. For example, some of the files in the program probably refer to others by name. At the very least, the makefile probably mentions the file that you renamed. If you retrieve an old snapshot, the renamed file is retrieved under its new name, which is not the name that the makefile expects. So the program won't really work as retrieved. @node Miscellaneous VC @subsection Miscellaneous Commands and Features of VC This section explains the less-frequently-used features of VC. @menu * Change Logs and VC:: Generating a change log file from log entries. * Renaming and VC:: A command to rename both the source and master file correctly. * Version Headers:: Inserting version control headers into working files. @end menu @node Change Logs and VC @subsubsection Change Logs and VC If you use RCS or CVS for a program and also maintain a change log file for it (@pxref{Change Log}), you can generate change log entries automatically from the version control log entries: @table @kbd @item C-x v a @kindex C-x v a @findex vc-update-change-log Visit the current directory's change log file and, for registered files in that directory, create new entries for versions checked in since the most recent entry in the change log file. (@code{vc-update-change-log}). This command works with RCS or CVS only, not with SCCS. @item C-u C-x v a As above, but only find entries for the current buffer's file. @item M-1 C-x v a As above, but find entries for all the currently visited files that are maintained with version control. This works only with RCS, and it puts all entries in the log for the default directory, which may not be appropriate. @end table For example, suppose the first line of @file{ChangeLog} is dated 1999-04-10, and that the only check-in since then was by Nathaniel Bowditch to @file{rcs2log} on 1999-05-22 with log text @samp{Ignore log messages that start with `#'.}. Then @kbd{C-x v a} visits @file{ChangeLog} and inserts text like this: @iftex @medbreak @end iftex @smallexample @group 1999-05-22 Nathaniel Bowditch <nat@@apn.org> * rcs2log: Ignore log messages that start with `#'. @end group @end smallexample @iftex @medbreak @end iftex @noindent You can then edit the new change log entry further as you wish. Unfortunately, timestamps in ChangeLog files are only dates, so some of the new change log entry may duplicate what's already in ChangeLog. You will have to remove these duplicates by hand. Normally, the log entry for file @file{foo} is displayed as @samp{* foo: @var{text of log entry}}. The @samp{:} after @file{foo} is omitted if the text of the log entry starts with @w{@samp{(@var{functionname}): }}. For example, if the log entry for @file{vc.el} is @samp{(vc-do-command): Check call-process status.}, then the text in @file{ChangeLog} looks like this: @iftex @medbreak @end iftex @smallexample @group 1999-05-06 Nathaniel Bowditch <nat@@apn.org> * vc.el (vc-do-command): Check call-process status. @end group @end smallexample @iftex @medbreak @end iftex When @kbd{C-x v a} adds several change log entries at once, it groups related log entries together if they all are checked in by the same author at nearly the same time. If the log entries for several such files all have the same text, it coalesces them into a single entry. For example, suppose the most recent check-ins have the following log entries: @flushleft @bullet{} For @file{vc.texinfo}: @samp{Fix expansion typos.} @bullet{} For @file{vc.el}: @samp{Don't call expand-file-name.} @bullet{} For @file{vc-hooks.el}: @samp{Don't call expand-file-name.} @end flushleft @noindent They appear like this in @file{ChangeLog}: @iftex @medbreak @end iftex @smallexample @group 1999-04-01 Nathaniel Bowditch <nat@@apn.org> * vc.texinfo: Fix expansion typos. * vc.el, vc-hooks.el: Don't call expand-file-name. @end group @end smallexample @iftex @medbreak @end iftex Normally, @kbd{C-x v a} separates log entries by a blank line, but you can mark several related log entries to be clumped together (without an intervening blank line) by starting the text of each related log entry with a label of the form @w{@samp{@{@var{clumpname}@} }}. The label itself is not copied to @file{ChangeLog}. For example, suppose the log entries are: @flushleft @bullet{} For @file{vc.texinfo}: @samp{@{expand@} Fix expansion typos.} @bullet{} For @file{vc.el}: @samp{@{expand@} Don't call expand-file-name.} @bullet{} For @file{vc-hooks.el}: @samp{@{expand@} Don't call expand-file-name.} @end flushleft @noindent Then the text in @file{ChangeLog} looks like this: @iftex @medbreak @end iftex @smallexample @group 1999-04-01 Nathaniel Bowditch <nat@@apn.org> * vc.texinfo: Fix expansion typos. * vc.el, vc-hooks.el: Don't call expand-file-name. @end group @end smallexample @iftex @medbreak @end iftex A log entry whose text begins with @samp{#} is not copied to @file{ChangeLog}. For example, if you merely fix some misspellings in comments, you can log the change with an entry beginning with @samp{#} to avoid putting such trivia into @file{ChangeLog}. @node Renaming and VC @subsubsection Renaming VC Work Files and Master Files @findex vc-rename-file When you rename a registered file, you must also rename its master file correspondingly to get proper results. Use @code{vc-rename-file} to rename the source file as you specify, and rename its master file accordingly. It also updates any snapshots (@pxref{Snapshots}) that mention the file, so that they use the new name; despite this, the snapshot thus modified may not completely work (@pxref{Snapshot Caveats}). You cannot use @code{vc-rename-file} on a file that is locked by someone else. @node Version Headers @subsubsection Inserting Version Control Headers Sometimes it is convenient to put version identification strings directly into working files. Certain special strings called @dfn{version headers} are replaced in each successive version by the number of that version. If you are using RCS, and version headers are present in your working files, Emacs can use them to determine the current version and the locking state of the files. This is more reliable than referring to the master files, which is done when there are no version headers. Note that in a multi-branch environment, version headers are necessary to make VC behave correctly (@pxref{Multi-User Branching}). Searching for version headers is controlled by the variable @code{vc-consult-headers}. If it is non-@code{nil}, Emacs searches for headers to determine the version number you are editing. Setting it to @code{nil} disables this feature. @kindex C-x v h @findex vc-insert-headers You can use the @kbd{C-x v h} command (@code{vc-insert-headers}) to insert a suitable header string. @table @kbd @item C-x v h Insert headers in a file for use with your version-control system. @end table @vindex vc-header-alist The default header string is @samp{@w{$}Id$} for RCS and @samp{@w{%}W%} for SCCS. You can specify other headers to insert by setting the variable @code{vc-header-alist}. Its value is a list of elements of the form @code{(@var{program} . @var{string})} where @var{program} is @code{RCS} or @code{SCCS} and @var{string} is the string to use. Instead of a single string, you can specify a list of strings; then each string in the list is inserted as a separate header on a line of its own. It is often necessary to use ``superfluous'' backslashes when writing the strings that you put in this variable. This is to prevent the string in the constant from being interpreted as a header itself if the Emacs Lisp file containing it is maintained with version control. @vindex vc-comment-alist Each header is inserted surrounded by tabs, inside comment delimiters, on a new line at point. Normally the ordinary comment start and comment end strings of the current mode are used, but for certain modes, there are special comment delimiters for this purpose; the variable @code{vc-comment-alist} specifies them. Each element of this list has the form @code{(@var{mode} @var{starter} @var{ender})}. @vindex vc-static-header-alist The variable @code{vc-static-header-alist} specifies further strings to add based on the name of the buffer. Its value should be a list of elements of the form @code{(@var{regexp} . @var{format})}. Whenever @var{regexp} matches the buffer name, @var{format} is inserted as part of the header. A header line is inserted for each element that matches the buffer name, and for each string specified by @code{vc-header-alist}. The header line is made by processing the string from @code{vc-header-alist} with the format taken from the element. The default value for @code{vc-static-header-alist} is as follows: @example @group (("\\.c$" . "\n#ifndef lint\nstatic char vcid[] = \"\%s\";\n\ #endif /* lint */\n")) @end group @end example @noindent It specifies insertion of text of this form: @example @group #ifndef lint static char vcid[] = "@var{string}"; #endif /* lint */ @end group @end example @noindent Note that the text above starts with a blank line. If you use more than one version header in a file, put them close together in the file. The mechanism in @code{revert-buffer} that preserves markers may not handle markers positioned between two version headers. @node Customizing VC @subsection Customizing VC There are many ways of customizing VC. The options you can set fall into four categories, described in the following sections. @vindex vc-ignore-vc-files @cindex Version control, deactivating In addition, it is possible to turn VC on and off generally by setting the variable @code{vc-ignore-vc-files}. Normally VC will notice the presence of version control on a file you visit and automatically invoke the relevant program to check the file's state. Change @code{vc-ignore-vc-files} if this isn't the right thing, for instance, if you edit files under version control but don't have the relevant version control programs available. @menu * Backend Options:: Customizing the back-end to your needs. * VC Workfile Handling:: Various options concerning working files. * VC Status Retrieval:: How VC finds the version control status of a file, and how to customize this. * VC Command Execution:: Which commands VC should run, and how. @end menu @node Backend Options @subsubsection Options for VC Backends @cindex backend options (VC) @cindex locking under version control You can tell RCS and CVS whether to use locking for a file or not (@pxref{VC Concepts}, for a description of locking). VC automatically recognizes what you have chosen, and behaves accordingly. @cindex non-strict locking (RCS) @cindex locking, non-strict (RCS) For RCS, the default is to use locking, but there is a mode called @dfn{non-strict locking} in which you can check-in changes without locking the file first. Use @samp{rcs -U} to switch to non-strict locking for a particular file, see the @samp{rcs} manpage for details. @cindex locking (CVS) Under CVS, the default is not to use locking; anyone can change a work file at any time. However, there are ways to restrict this, resulting in behavior that resembles locking. @cindex CVSREAD environment variable (CVS) For one thing, you can set the @code{CVSREAD} environment variable to an arbitrary value. If this variable is defined, CVS makes your work files read-only by default. In Emacs, you must type @kbd{C-x C-q} to make the file writeable, so that editing works in fact similar as if locking was used. Note however, that no actual locking is performed, so several users can make their files writeable at the same time. When setting @code{CVSREAD} for the first time, make sure to check out all your modules anew, so that the file protections are set correctly. @cindex cvs watch feature @cindex watching files (CVS) Another way to achieve something similar to locking is to use the @dfn{watch} feature of CVS. If a file is being watched, CVS makes it read-only by default, and you must also use @kbd{C-x C-q} in Emacs to make it writable. VC calls @code{cvs edit} to make the file writeable, and CVS takes care to notify other developers of the fact that you intend to change the file. See the CVS documentation for details on using the watch feature. @vindex vc-handle-cvs You can turn off use of VC for CVS-managed files by setting the variable @code{vc-handle-cvs} to @code{nil}. If you do this, Emacs treats these files as if they were not registered, and the VC commands are not available for them. You must do all CVS operations manually. @node VC Workfile Handling @subsubsection VC Workfile Handling @vindex vc-make-backup-files Emacs normally does not save backup files for source files that are maintained with version control. If you want to make backup files even for files that use version control, set the variable @code{vc-make-backup-files} to a non-@code{nil} value. @vindex vc-keep-workfiles Normally the work file exists all the time, whether it is locked or not. If you set @code{vc-keep-workfiles} to @code{nil}, then checking in a new version with @kbd{C-x C-q} deletes the work file; but any attempt to visit the file with Emacs creates it again. (With CVS, work files are always kept.) @vindex vc-follow-symlinks Editing a version-controlled file through a symbolic link can be dangerous. It bypasses the version control system---you can edit the file without locking it, and fail to check your changes in. Also, your changes might overwrite those of another user. To protect against this, VC checks each symbolic link that you visit, to see if it points to a file under version control. The variable @code{vc-follow-symlinks} controls what to do when a symbolic link points to a version-controlled file. If it is @code{nil}, VC only displays a warning message. If it is @code{t}, VC automatically follows the link, and visits the real file instead, telling you about this in the echo area. If the value is @code{ask} (the default), VC asks you each time whether to follow the link. @node VC Status Retrieval @subsubsection VC Status Retrieval @c There is no need to tell users about vc-master-templates. When deducing the locked/unlocked state of a file, VC first looks for an RCS version header string in the file (@pxref{Version Headers}). If there is no header string, or if you are using SCCS, VC normally looks at the file permissions of the work file; this is fast. But there might be situations when the file permissions cannot be trusted. In this case the master file has to be consulted, which is rather expensive. Also the master file can only tell you @emph{if} there's any lock on the file, but not whether your work file really contains that locked version. @vindex vc-consult-headers You can tell VC not to use version headers to determine lock status by setting @code{vc-consult-headers} to @code{nil}. VC then always uses the file permissions (if it can trust them), or else checks the master file. @vindex vc-mistrust-permissions You can specify the criterion for whether to trust the file permissions by setting the variable @code{vc-mistrust-permissions}. Its value can be @code{t} (always mistrust the file permissions and check the master file), @code{nil} (always trust the file permissions), or a function of one argument which makes the decision. The argument is the directory name of the @file{RCS}, @file{CVS} or @file{SCCS} subdirectory. A non-@code{nil} value from the function says to mistrust the file permissions. If you find that the file permissions of work files are changed erroneously, set @code{vc-mistrust-permissions} to @code{t}. Then VC always checks the master file to determine the file's status. @node VC Command Execution @subsubsection VC Command Execution @vindex vc-suppress-confirm If @code{vc-suppress-confirm} is non-@code{nil}, then @kbd{C-x C-q} and @kbd{C-x v i} can save the current buffer without asking, and @kbd{C-x v u} also operates without asking for confirmation. (This variable does not affect @kbd{C-x v c}; that operation is so drastic that it should always ask for confirmation.) @vindex vc-command-messages VC mode does much of its work by running the shell commands for RCS, CVS and SCCS. If @code{vc-command-messages} is non-@code{nil}, VC displays messages to indicate which shell commands it runs, and additional messages when the commands finish. @vindex vc-path You can specify additional directories to search for version control programs by setting the variable @code{vc-path}. These directories are searched before the usual search path. But the proper files are usually found automatically. @node Directories @section File Directories @cindex file directory @cindex directory listing The file system groups files into @dfn{directories}. A @dfn{directory listing} is a list of all the files in a directory. Emacs provides commands to create and delete directories, and to make directory listings in brief format (file names only) and verbose format (sizes, dates, and authors included). There is also a directory browser called Dired; see @ref{Dired}. @table @kbd @item C-x C-d @var{dir-or-pattern} @key{RET} Display a brief directory listing (@code{list-directory}). @item C-u C-x C-d @var{dir-or-pattern} @key{RET} Display a verbose directory listing. @item M-x make-directory @key{RET} @var{dirname} @key{RET} Create a new directory named @var{dirname}. @item M-x delete-directory @key{RET} @var{dirname} @key{RET} Delete the directory named @var{dirname}. It must be empty, or you get an error. @end table @findex list-directory @kindex C-x C-d The command to display a directory listing is @kbd{C-x C-d} (@code{list-directory}). It reads using the minibuffer a file name which is either a directory to be listed or a wildcard-containing pattern for the files to be listed. For example, @example C-x C-d /u2/emacs/etc @key{RET} @end example @noindent lists all the files in directory @file{/u2/emacs/etc}. Here is an example of specifying a file name pattern: @example C-x C-d /u2/emacs/src/*.c @key{RET} @end example Normally, @kbd{C-x C-d} prints a brief directory listing containing just file names. A numeric argument (regardless of value) tells it to make a verbose listing including sizes, dates, and authors (like @samp{ls -l}). @vindex list-directory-brief-switches @vindex list-directory-verbose-switches The text of a directory listing is obtained by running @code{ls} in an inferior process. Two Emacs variables control the switches passed to @code{ls}: @code{list-directory-brief-switches} is a string giving the switches to use in brief listings (@code{"-CF"} by default), and @code{list-directory-verbose-switches} is a string giving the switches to use in a verbose listing (@code{"-l"} by default). @node Comparing Files @section Comparing Files @cindex comparing files @findex diff @vindex diff-switches The command @kbd{M-x diff} compares two files, displaying the differences in an Emacs buffer named @samp{*Diff*}. It works by running the @code{diff} program, using options taken from the variable @code{diff-switches}, whose value should be a string. The buffer @samp{*Diff*} has Compilation mode as its major mode, so you can use @kbd{C-x `} to visit successive changed locations in the two source files. You can also move to a particular hunk of changes and type @key{RET} or @kbd{C-c C-c}, or click @kbd{Mouse-2} on it, to move to the corresponding source location. You can also use the other special commands of Compilation mode: @key{SPC} and @key{DEL} for scrolling, and @kbd{M-p} and @kbd{M-n} for cursor motion. @xref{Compilation}. @findex diff-backup The command @kbd{M-x diff-backup} compares a specified file with its most recent backup. If you specify the name of a backup file, @code{diff-backup} compares it with the source file that it is a backup of. @findex compare-windows The command @kbd{M-x compare-windows} compares the text in the current window with that in the next window. Comparison starts at point in each window, and each starting position is pushed on the mark ring in its respective buffer. Then point moves forward in each window, a character at a time, until a mismatch between the two windows is reached. Then the command is finished. For more information about windows in Emacs, @ref{Windows}. @vindex compare-ignore-case With a numeric argument, @code{compare-windows} ignores changes in whitespace. If the variable @code{compare-ignore-case} is non-@code{nil}, it ignores differences in case as well. See also @ref{Emerge}, for convenient facilities for merging two similar files. @node Misc File Ops @section Miscellaneous File Operations Emacs has commands for performing many other operations on files. All operate on one file; they do not accept wildcard file names. @findex view-file @cindex viewing @cindex View mode @cindex mode, View @kbd{M-x view-file} allows you to scan or read a file by sequential screenfuls. It reads a file name argument using the minibuffer. After reading the file into an Emacs buffer, @code{view-file} displays the beginning. You can then type @key{SPC} to scroll forward one windowful, or @key{DEL} to scroll backward. Various other commands are provided for moving around in the file, but none for changing it; type @kbd{?} while viewing for a list of them. They are mostly the same as normal Emacs cursor motion commands. To exit from viewing, type @kbd{q}. The commands for viewing are defined by a special major mode called View mode. A related command, @kbd{M-x view-buffer}, views a buffer already present in Emacs. @xref{Misc Buffer}. @findex insert-file @kbd{M-x insert-file} inserts a copy of the contents of the specified file into the current buffer at point, leaving point unchanged before the contents and the mark after them. @findex write-region @kbd{M-x write-region} is the inverse of @kbd{M-x insert-file}; it copies the contents of the region into the specified file. @kbd{M-x append-to-file} adds the text of the region to the end of the specified file. @xref{Accumulating Text}. @findex delete-file @cindex deletion (of files) @kbd{M-x delete-file} deletes the specified file, like the @code{rm} command in the shell. If you are deleting many files in one directory, it may be more convenient to use Dired (@pxref{Dired}). @findex rename-file @kbd{M-x rename-file} reads two file names @var{old} and @var{new} using the minibuffer, then renames file @var{old} as @var{new}. If a file named @var{new} already exists, you must confirm with @kbd{yes} or renaming is not done; this is because renaming causes the old meaning of the name @var{new} to be lost. If @var{old} and @var{new} are on different file systems, the file @var{old} is copied and deleted. @findex add-name-to-file The similar command @kbd{M-x add-name-to-file} is used to add an additional name to an existing file without removing its old name. The new name must belong on the same file system that the file is on. @findex copy-file @cindex copying files @kbd{M-x copy-file} reads the file @var{old} and writes a new file named @var{new} with the same contents. Confirmation is required if a file named @var{new} already exists, because copying has the consequence of overwriting the old contents of the file @var{new}. @findex make-symbolic-link @kbd{M-x make-symbolic-link} reads two file names @var{target} and @var{linkname}, then creates a symbolic link named @var{linkname} and pointing at @var{target}. The effect is that future attempts to open file @var{linkname} will refer to whatever file is named @var{target} at the time the opening is done, or will get an error if the name @var{target} is not in use at that time. This command does not expand the argument @var{target}, so that it allows you to specify a relative name as the target of the link. Confirmation is required when creating the link if @var{linkname} is in use. Note that not all systems support symbolic links. @node Compressed Files @section Accessing Compressed Files @cindex compression @cindex uncompression @cindex Auto Compression mode @cindex mode, Auto Compression @pindex gzip @findex auto-compression-mode Emacs comes with a library that can automatically uncompress compressed files when you visit them, and automatically recompress them if you alter them and save them. To enable this feature, type the command @kbd{M-x auto-compression-mode}. When automatic compression (which implies automatic uncompression as well) is enabled, Emacs recognizes compressed files by their file names. File names ending in @samp{.gz} indicate a file compressed with @code{gzip}. Other endings indicate other compression programs. Automatic uncompression and compression apply to all the operations in which Emacs uses the contents of a file. This includes visiting it, saving it, inserting its contents into a buffer, loading it, and byte compiling it. @node Remote Files @section Remote Files @cindex FTP @cindex remote file access You can refer to files on other machines using a special file name syntax: @example @group /@var{host}:@var{filename} /@var{user}@@@var{host}:@var{filename} /@var{user}@@@var{host}#@var{port}:@var{filename} @end group @end example @noindent When you do this, Emacs uses the FTP program to read and write files on the specified host. It logs in through FTP using your user name or the name @var{user}. It may ask you for a password from time to time; this is used for logging in on @var{host}. The form using @var{port} allows you to access servers running on a non-default TCP port. @cindex ange-ftp @vindex ange-ftp-default-user Normally, if you do not specify a user name in a remote file name, that means to use your own user name. But if you set the variable @code{ange-ftp-default-user} to a string, that string is used instead. (The Emacs package that implements FTP file access is called @code{ange-ftp}.) @vindex file-name-handler-alist You can entirely turn off the FTP file name feature by removing the entries @var{ange-ftp-completion-hook-function} and @var{ange-ftp-hook-function} from the variable @code{file-name-handler-alist}. @node Quoted File Names @section Quoted File Names @cindex quoting file names You can @dfn{quote} an absolute file name to prevent special characters and syntax in it from having their special effects. The way to do this is to add @samp{/:} at the beginning. For example, you can quote a local file name which appears remote, to prevent it from being treated as a remote file name. Thus, if you have a directory named @file{/foo:} and a file named @file{bar} in it, you can refer to that file in Emacs as @samp{/:/foo:/bar}. @samp{/:} can also prevent @samp{~} from being treated as a special character for a user's home directory. For example, @file{/:/tmp/~hack} refers to a file whose name is @file{~hack} in directory @file{/tmp}. Likewise, quoting with @samp{/:} is one way to enter in the minibuffer a file name that contains @samp{$}. However, the @samp{/:} must be at the beginning of the buffer in order to quote @samp{$}. You can also quote wildcard characters with @samp{/:}, for visiting. For example, @file{/:/tmp/foo*bar} visits the file @file{/tmp/foo*bar}. However, in most cases you can simply type the wildcard characters for themselves. For example, if the only file name in @file{/tmp} that starts with @samp{foo} and ends with @samp{bar} is @file{foo*bar}, then specifying @file{/tmp/foo*bar} will visit just @file{/tmp/foo*bar}.