Mercurial > emacs
view src/insdel.c @ 112233:3b840e622de1
Merge: make-dist distributes test/ files too.
| author | Paul Eggert <eggert@cs.ucla.edu> |
|---|---|
| date | Fri, 14 Jan 2011 10:58:35 -0800 |
| parents | 417b1e4d63cd |
| children | 42e22c4f06b7 |
line wrap: on
line source
/* Buffer insertion/deletion and gap motion for GNU Emacs. Copyright (C) 1985, 1986, 1993, 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. This file is part of GNU Emacs. GNU Emacs is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. GNU Emacs is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>. */ #include <config.h> #include <setjmp.h> #include "lisp.h" #include "intervals.h" #include "buffer.h" #include "character.h" #include "window.h" #include "blockinput.h" #include "region-cache.h" #ifndef NULL #define NULL 0 #endif static void insert_from_string_1 (Lisp_Object string, EMACS_INT pos, EMACS_INT pos_byte, EMACS_INT nchars, EMACS_INT nbytes, int inherit, int before_markers); static void insert_from_buffer_1 (struct buffer *buf, EMACS_INT from, EMACS_INT nchars, int inherit); static void gap_left (EMACS_INT charpos, EMACS_INT bytepos, int newgap); static void gap_right (EMACS_INT charpos, EMACS_INT bytepos); static void adjust_markers_gap_motion (EMACS_INT from, EMACS_INT to, EMACS_INT amount); static void adjust_markers_for_insert (EMACS_INT from, EMACS_INT from_byte, EMACS_INT to, EMACS_INT to_byte, int before_markers); static void adjust_markers_for_replace (EMACS_INT, EMACS_INT, EMACS_INT, EMACS_INT, EMACS_INT, EMACS_INT); static void adjust_point (EMACS_INT nchars, EMACS_INT nbytes); Lisp_Object Fcombine_after_change_execute (void); /* Non-nil means don't call the after-change-functions right away, just record an element in combine_after_change_list. */ Lisp_Object Vcombine_after_change_calls; /* List of elements of the form (BEG-UNCHANGED END-UNCHANGED CHANGE-AMOUNT) describing changes which happened while combine_after_change_calls was nonzero. We use this to decide how to call them once the deferral ends. In each element. BEG-UNCHANGED is the number of chars before the changed range. END-UNCHANGED is the number of chars after the changed range, and CHANGE-AMOUNT is the number of characters inserted by the change (negative for a deletion). */ Lisp_Object combine_after_change_list; /* Buffer which combine_after_change_list is about. */ Lisp_Object combine_after_change_buffer; Lisp_Object Qinhibit_modification_hooks; /* Check all markers in the current buffer, looking for something invalid. */ static int check_markers_debug_flag; #define CHECK_MARKERS() \ if (check_markers_debug_flag) \ check_markers (); \ else void check_markers (void) { register struct Lisp_Marker *tail; int multibyte = ! NILP (current_buffer->enable_multibyte_characters); for (tail = BUF_MARKERS (current_buffer); tail; tail = tail->next) { if (tail->buffer->text != current_buffer->text) abort (); if (tail->charpos > Z) abort (); if (tail->bytepos > Z_BYTE) abort (); if (multibyte && ! CHAR_HEAD_P (FETCH_BYTE (tail->bytepos))) abort (); } } /* Move gap to position CHARPOS. Note that this can quit! */ void move_gap (EMACS_INT charpos) { move_gap_both (charpos, charpos_to_bytepos (charpos)); } /* Move gap to byte position BYTEPOS, which is also char position CHARPOS. Note that this can quit! */ void move_gap_both (EMACS_INT charpos, EMACS_INT bytepos) { if (bytepos < GPT_BYTE) gap_left (charpos, bytepos, 0); else if (bytepos > GPT_BYTE) gap_right (charpos, bytepos); } /* Move the gap to a position less than the current GPT. BYTEPOS describes the new position as a byte position, and CHARPOS is the corresponding char position. If NEWGAP is nonzero, then don't update beg_unchanged and end_unchanged. */ static void gap_left (EMACS_INT charpos, EMACS_INT bytepos, int newgap) { register unsigned char *to, *from; register EMACS_INT i; EMACS_INT new_s1; if (!newgap) BUF_COMPUTE_UNCHANGED (current_buffer, charpos, GPT); i = GPT_BYTE; to = GAP_END_ADDR; from = GPT_ADDR; new_s1 = GPT_BYTE; /* Now copy the characters. To move the gap down, copy characters up. */ while (1) { /* I gets number of characters left to copy. */ i = new_s1 - bytepos; if (i == 0) break; /* If a quit is requested, stop copying now. Change BYTEPOS to be where we have actually moved the gap to. */ if (QUITP) { bytepos = new_s1; charpos = BYTE_TO_CHAR (bytepos); break; } /* Move at most 32000 chars before checking again for a quit. */ if (i > 32000) i = 32000; new_s1 -= i; from -= i, to -= i; memmove (to, from, i); } /* Adjust markers, and buffer data structure, to put the gap at BYTEPOS. BYTEPOS is where the loop above stopped, which may be what was specified or may be where a quit was detected. */ adjust_markers_gap_motion (bytepos, GPT_BYTE, GAP_SIZE); GPT_BYTE = bytepos; GPT = charpos; if (bytepos < charpos) abort (); if (GAP_SIZE > 0) *(GPT_ADDR) = 0; /* Put an anchor. */ QUIT; } /* Move the gap to a position greater than the current GPT. BYTEPOS describes the new position as a byte position, and CHARPOS is the corresponding char position. */ static void gap_right (EMACS_INT charpos, EMACS_INT bytepos) { register unsigned char *to, *from; register EMACS_INT i; EMACS_INT new_s1; BUF_COMPUTE_UNCHANGED (current_buffer, charpos, GPT); i = GPT_BYTE; from = GAP_END_ADDR; to = GPT_ADDR; new_s1 = GPT_BYTE; /* Now copy the characters. To move the gap up, copy characters down. */ while (1) { /* I gets number of characters left to copy. */ i = bytepos - new_s1; if (i == 0) break; /* If a quit is requested, stop copying now. Change BYTEPOS to be where we have actually moved the gap to. */ if (QUITP) { bytepos = new_s1; charpos = BYTE_TO_CHAR (bytepos); break; } /* Move at most 32000 chars before checking again for a quit. */ if (i > 32000) i = 32000; new_s1 += i; memmove (to, from, i); from += i, to += i; } adjust_markers_gap_motion (GPT_BYTE + GAP_SIZE, bytepos + GAP_SIZE, - GAP_SIZE); GPT = charpos; GPT_BYTE = bytepos; if (bytepos < charpos) abort (); if (GAP_SIZE > 0) *(GPT_ADDR) = 0; /* Put an anchor. */ QUIT; } /* Add AMOUNT to the byte position of every marker in the current buffer whose current byte position is between FROM (exclusive) and TO (inclusive). Also, any markers past the outside of that interval, in the direction of adjustment, are first moved back to the near end of the interval and then adjusted by AMOUNT. When the latter adjustment is done, if AMOUNT is negative, we record the adjustment for undo. (This case happens only for deletion.) The markers' character positions are not altered, because gap motion does not affect character positions. */ int adjust_markers_test; static void adjust_markers_gap_motion (EMACS_INT from, EMACS_INT to, EMACS_INT amount) { /* Now that a marker has a bytepos, not counting the gap, nothing needs to be done here. */ #if 0 Lisp_Object marker; register struct Lisp_Marker *m; register EMACS_INT mpos; marker = BUF_MARKERS (current_buffer); while (!NILP (marker)) { m = XMARKER (marker); mpos = m->bytepos; if (amount > 0) { if (mpos > to && mpos < to + amount) { if (adjust_markers_test) abort (); mpos = to + amount; } } else { /* Here's the case where a marker is inside text being deleted. AMOUNT can be negative for gap motion, too, but then this range contains no markers. */ if (mpos > from + amount && mpos <= from) { if (adjust_markers_test) abort (); mpos = from + amount; } } if (mpos > from && mpos <= to) mpos += amount; m->bufpos = mpos; marker = m->chain; } #endif } /* Adjust all markers for a deletion whose range in bytes is FROM_BYTE to TO_BYTE. The range in charpos is FROM to TO. This function assumes that the gap is adjacent to or inside of the range being deleted. */ void adjust_markers_for_delete (EMACS_INT from, EMACS_INT from_byte, EMACS_INT to, EMACS_INT to_byte) { Lisp_Object marker; register struct Lisp_Marker *m; register EMACS_INT charpos; for (m = BUF_MARKERS (current_buffer); m; m = m->next) { charpos = m->charpos; if (charpos > Z) abort (); /* If the marker is after the deletion, relocate by number of chars / bytes deleted. */ if (charpos > to) { m->charpos -= to - from; m->bytepos -= to_byte - from_byte; } /* Here's the case where a marker is inside text being deleted. */ else if (charpos > from) { if (! m->insertion_type) { /* Normal markers will end up at the beginning of the re-inserted text after undoing a deletion, and must be adjusted to move them to the correct place. */ XSETMISC (marker, m); record_marker_adjustment (marker, from - charpos); } else if (charpos < to) { /* Before-insertion markers will automatically move forward upon re-inserting the deleted text, so we have to arrange for them to move backward to the correct position. */ XSETMISC (marker, m); record_marker_adjustment (marker, to - charpos); } m->charpos = from; m->bytepos = from_byte; } /* Here's the case where a before-insertion marker is immediately before the deleted region. */ else if (charpos == from && m->insertion_type) { /* Undoing the change uses normal insertion, which will incorrectly make MARKER move forward, so we arrange for it to then move backward to the correct place at the beginning of the deleted region. */ XSETMISC (marker, m); record_marker_adjustment (marker, to - from); } } } /* Adjust markers for an insertion that stretches from FROM / FROM_BYTE to TO / TO_BYTE. We have to relocate the charpos of every marker that points after the insertion (but not their bytepos). When a marker points at the insertion point, we advance it if either its insertion-type is t or BEFORE_MARKERS is true. */ static void adjust_markers_for_insert (EMACS_INT from, EMACS_INT from_byte, EMACS_INT to, EMACS_INT to_byte, int before_markers) { struct Lisp_Marker *m; int adjusted = 0; EMACS_INT nchars = to - from; EMACS_INT nbytes = to_byte - from_byte; for (m = BUF_MARKERS (current_buffer); m; m = m->next) { eassert (m->bytepos >= m->charpos && m->bytepos - m->charpos <= Z_BYTE - Z); if (m->bytepos == from_byte) { if (m->insertion_type || before_markers) { m->bytepos = to_byte; m->charpos = to; if (m->insertion_type) adjusted = 1; } } else if (m->bytepos > from_byte) { m->bytepos += nbytes; m->charpos += nchars; } } /* Adjusting only markers whose insertion-type is t may result in - disordered start and end in overlays, and - disordered overlays in the slot `overlays_before' of current_buffer. */ if (adjusted) { fix_start_end_in_overlays(from, to); fix_overlays_before (current_buffer, from, to); } } /* Adjust point for an insertion of NBYTES bytes, which are NCHARS characters. This is used only when the value of point changes due to an insert or delete; it does not represent a conceptual change in point as a marker. In particular, point is not crossing any interval boundaries, so there's no need to use the usual SET_PT macro. In fact it would be incorrect to do so, because either the old or the new value of point is out of sync with the current set of intervals. */ static void adjust_point (EMACS_INT nchars, EMACS_INT nbytes) { BUF_PT (current_buffer) += nchars; BUF_PT_BYTE (current_buffer) += nbytes; /* In a single-byte buffer, the two positions must be equal. */ eassert (PT_BYTE >= PT && PT_BYTE - PT <= ZV_BYTE - ZV); } /* Adjust markers for a replacement of a text at FROM (FROM_BYTE) of length OLD_CHARS (OLD_BYTES) to a new text of length NEW_CHARS (NEW_BYTES). It is assumed that OLD_CHARS > 0, i.e., this is not an insertion. */ static void adjust_markers_for_replace (EMACS_INT from, EMACS_INT from_byte, EMACS_INT old_chars, EMACS_INT old_bytes, EMACS_INT new_chars, EMACS_INT new_bytes) { register struct Lisp_Marker *m; EMACS_INT prev_to_byte = from_byte + old_bytes; EMACS_INT diff_chars = new_chars - old_chars; EMACS_INT diff_bytes = new_bytes - old_bytes; for (m = BUF_MARKERS (current_buffer); m; m = m->next) { if (m->bytepos >= prev_to_byte) { m->charpos += diff_chars; m->bytepos += diff_bytes; } else if (m->bytepos > from_byte) { m->charpos = from; m->bytepos = from_byte; } } CHECK_MARKERS (); } /* Make the gap NBYTES_ADDED bytes longer. */ void make_gap_larger (EMACS_INT nbytes_added) { Lisp_Object tem; EMACS_INT real_gap_loc; EMACS_INT real_gap_loc_byte; EMACS_INT old_gap_size; /* If we have to get more space, get enough to last a while. */ nbytes_added += 2000; { EMACS_INT total_size = Z_BYTE - BEG_BYTE + GAP_SIZE + nbytes_added; if (total_size < 0 /* Don't allow a buffer size that won't fit in a Lisp integer. */ || total_size != XINT (make_number (total_size)) /* Don't allow a buffer size that won't fit in an int even if it will fit in a Lisp integer. That won't work because so many places still use `int'. */ || total_size != (EMACS_INT) (int) total_size) error ("Buffer exceeds maximum size"); } enlarge_buffer_text (current_buffer, nbytes_added); /* Prevent quitting in move_gap. */ tem = Vinhibit_quit; Vinhibit_quit = Qt; real_gap_loc = GPT; real_gap_loc_byte = GPT_BYTE; old_gap_size = GAP_SIZE; /* Call the newly allocated space a gap at the end of the whole space. */ GPT = Z + GAP_SIZE; GPT_BYTE = Z_BYTE + GAP_SIZE; GAP_SIZE = nbytes_added; /* Move the new gap down to be consecutive with the end of the old one. This adjusts the markers properly too. */ gap_left (real_gap_loc + old_gap_size, real_gap_loc_byte + old_gap_size, 1); /* Now combine the two into one large gap. */ GAP_SIZE += old_gap_size; GPT = real_gap_loc; GPT_BYTE = real_gap_loc_byte; /* Put an anchor. */ *(Z_ADDR) = 0; Vinhibit_quit = tem; } /* Make the gap NBYTES_REMOVED bytes shorter. */ void make_gap_smaller (EMACS_INT nbytes_removed) { Lisp_Object tem; EMACS_INT real_gap_loc; EMACS_INT real_gap_loc_byte; EMACS_INT real_Z; EMACS_INT real_Z_byte; EMACS_INT real_beg_unchanged; EMACS_INT new_gap_size; /* Make sure the gap is at least 20 bytes. */ if (GAP_SIZE - nbytes_removed < 20) nbytes_removed = GAP_SIZE - 20; /* Prevent quitting in move_gap. */ tem = Vinhibit_quit; Vinhibit_quit = Qt; real_gap_loc = GPT; real_gap_loc_byte = GPT_BYTE; new_gap_size = GAP_SIZE - nbytes_removed; real_Z = Z; real_Z_byte = Z_BYTE; real_beg_unchanged = BEG_UNCHANGED; /* Pretend that the last unwanted part of the gap is the entire gap, and that the first desired part of the gap is part of the buffer text. */ memset (GPT_ADDR, 0, new_gap_size); GPT += new_gap_size; GPT_BYTE += new_gap_size; Z += new_gap_size; Z_BYTE += new_gap_size; GAP_SIZE = nbytes_removed; /* Move the unwanted pretend gap to the end of the buffer. This adjusts the markers properly too. */ gap_right (Z, Z_BYTE); enlarge_buffer_text (current_buffer, -nbytes_removed); /* Now restore the desired gap. */ GAP_SIZE = new_gap_size; GPT = real_gap_loc; GPT_BYTE = real_gap_loc_byte; Z = real_Z; Z_BYTE = real_Z_byte; BEG_UNCHANGED = real_beg_unchanged; /* Put an anchor. */ *(Z_ADDR) = 0; Vinhibit_quit = tem; } void make_gap (EMACS_INT nbytes_added) { if (nbytes_added >= 0) make_gap_larger (nbytes_added); #if defined USE_MMAP_FOR_BUFFERS || defined REL_ALLOC || defined DOUG_LEA_MALLOC else make_gap_smaller (-nbytes_added); #endif } /* Copy NBYTES bytes of text from FROM_ADDR to TO_ADDR. FROM_MULTIBYTE says whether the incoming text is multibyte. TO_MULTIBYTE says whether to store the text as multibyte. If FROM_MULTIBYTE != TO_MULTIBYTE, we convert. Return the number of bytes stored at TO_ADDR. */ EMACS_INT copy_text (const unsigned char *from_addr, unsigned char *to_addr, EMACS_INT nbytes, int from_multibyte, int to_multibyte) { if (from_multibyte == to_multibyte) { memcpy (to_addr, from_addr, nbytes); return nbytes; } else if (from_multibyte) { EMACS_INT nchars = 0; EMACS_INT bytes_left = nbytes; Lisp_Object tbl = Qnil; while (bytes_left > 0) { int thislen, c; c = STRING_CHAR_AND_LENGTH (from_addr, thislen); if (! ASCII_CHAR_P (c)) c &= 0xFF; *to_addr++ = c; from_addr += thislen; bytes_left -= thislen; nchars++; } return nchars; } else { unsigned char *initial_to_addr = to_addr; /* Convert single-byte to multibyte. */ while (nbytes > 0) { int c = *from_addr++; if (!ASCII_CHAR_P (c)) { c = BYTE8_TO_CHAR (c); to_addr += CHAR_STRING (c, to_addr); nbytes--; } else /* Special case for speed. */ *to_addr++ = c, nbytes--; } return to_addr - initial_to_addr; } } /* Return the number of bytes it would take to convert some single-byte text to multibyte. The single-byte text consists of NBYTES bytes at PTR. */ EMACS_INT count_size_as_multibyte (const unsigned char *ptr, EMACS_INT nbytes) { EMACS_INT i; EMACS_INT outgoing_nbytes = 0; for (i = 0; i < nbytes; i++) { unsigned int c = *ptr++; if (ASCII_CHAR_P (c)) outgoing_nbytes++; else { c = BYTE8_TO_CHAR (c); outgoing_nbytes += CHAR_BYTES (c); } } return outgoing_nbytes; } /* Insert a string of specified length before point. This function judges multibyteness based on enable_multibyte_characters in the current buffer; it never converts between single-byte and multibyte. DO NOT use this for the contents of a Lisp string or a Lisp buffer! prepare_to_modify_buffer could relocate the text. */ void insert (const unsigned char *string, EMACS_INT nbytes) { if (nbytes > 0) { EMACS_INT len = chars_in_text (string, nbytes), opoint; insert_1_both (string, len, nbytes, 0, 1, 0); opoint = PT - len; signal_after_change (opoint, 0, len); update_compositions (opoint, PT, CHECK_BORDER); } } /* Likewise, but inherit text properties from neighboring characters. */ void insert_and_inherit (const unsigned char *string, EMACS_INT nbytes) { if (nbytes > 0) { EMACS_INT len = chars_in_text (string, nbytes), opoint; insert_1_both (string, len, nbytes, 1, 1, 0); opoint = PT - len; signal_after_change (opoint, 0, len); update_compositions (opoint, PT, CHECK_BORDER); } } /* Insert the character C before point. Do not inherit text properties. */ void insert_char (int c) { unsigned char str[MAX_MULTIBYTE_LENGTH]; int len; if (! NILP (current_buffer->enable_multibyte_characters)) len = CHAR_STRING (c, str); else { len = 1; str[0] = c; } insert (str, len); } /* Insert the null-terminated string S before point. */ void insert_string (const char *s) { insert (s, strlen (s)); } /* Like `insert' except that all markers pointing at the place where the insertion happens are adjusted to point after it. Don't use this function to insert part of a Lisp string, since gc could happen and relocate it. */ void insert_before_markers (const unsigned char *string, EMACS_INT nbytes) { if (nbytes > 0) { EMACS_INT len = chars_in_text (string, nbytes), opoint; insert_1_both (string, len, nbytes, 0, 1, 1); opoint = PT - len; signal_after_change (opoint, 0, len); update_compositions (opoint, PT, CHECK_BORDER); } } /* Likewise, but inherit text properties from neighboring characters. */ void insert_before_markers_and_inherit (const unsigned char *string, EMACS_INT nbytes) { if (nbytes > 0) { EMACS_INT len = chars_in_text (string, nbytes), opoint; insert_1_both (string, len, nbytes, 1, 1, 1); opoint = PT - len; signal_after_change (opoint, 0, len); update_compositions (opoint, PT, CHECK_BORDER); } } /* Subroutine used by the insert functions above. */ void insert_1 (const unsigned char *string, EMACS_INT nbytes, int inherit, int prepare, int before_markers) { insert_1_both (string, chars_in_text (string, nbytes), nbytes, inherit, prepare, before_markers); } #ifdef BYTE_COMBINING_DEBUG /* See if the bytes before POS/POS_BYTE combine with bytes at the start of STRING to form a single character. If so, return the number of bytes at the start of STRING which combine in this way. Otherwise, return 0. */ int count_combining_before (const unsigned char *string, EMACS_INT length, EMACS_INT pos, EMACS_INT pos_byte) { int len, combining_bytes; const unsigned char *p; if (NILP (current_buffer->enable_multibyte_characters)) return 0; /* At first, we can exclude the following cases: (1) STRING[0] can't be a following byte of multibyte sequence. (2) POS is the start of the current buffer. (3) A character before POS is not a multibyte character. */ if (length == 0 || CHAR_HEAD_P (*string)) /* case (1) */ return 0; if (pos_byte == BEG_BYTE) /* case (2) */ return 0; len = 1; p = BYTE_POS_ADDR (pos_byte - 1); while (! CHAR_HEAD_P (*p)) p--, len++; if (! LEADING_CODE_P (*p)) /* case (3) */ return 0; combining_bytes = BYTES_BY_CHAR_HEAD (*p) - len; if (combining_bytes <= 0) /* The character preceding POS is, complete and no room for combining bytes (combining_bytes == 0), or an independent 8-bit character (combining_bytes < 0). */ return 0; /* We have a combination situation. Count the bytes at STRING that may combine. */ p = string + 1; while (!CHAR_HEAD_P (*p) && p < string + length) p++; return (combining_bytes < p - string ? combining_bytes : p - string); } /* See if the bytes after POS/POS_BYTE combine with bytes at the end of STRING to form a single character. If so, return the number of bytes after POS/POS_BYTE which combine in this way. Otherwise, return 0. */ int count_combining_after (const unsigned char *string, EMACS_INT length, EMACS_INT pos, EMACS_INT pos_byte) { EMACS_INT opos_byte = pos_byte; EMACS_INT i; EMACS_INT bytes; unsigned char *bufp; if (NILP (current_buffer->enable_multibyte_characters)) return 0; /* At first, we can exclude the following cases: (1) The last byte of STRING is an ASCII. (2) POS is the last of the current buffer. (3) A character at POS can't be a following byte of multibyte character. */ if (length > 0 && ASCII_BYTE_P (string[length - 1])) /* case (1) */ return 0; if (pos_byte == Z_BYTE) /* case (2) */ return 0; bufp = BYTE_POS_ADDR (pos_byte); if (CHAR_HEAD_P (*bufp)) /* case (3) */ return 0; i = length - 1; while (i >= 0 && ! CHAR_HEAD_P (string[i])) { i--; } if (i < 0) { /* All characters in STRING are not character head. We must check also preceding bytes at POS. We are sure that the gap is at POS. */ unsigned char *p = BEG_ADDR; i = pos_byte - 2; while (i >= 0 && ! CHAR_HEAD_P (p[i])) i--; if (i < 0 || !LEADING_CODE_P (p[i])) return 0; bytes = BYTES_BY_CHAR_HEAD (p[i]); return (bytes <= pos_byte - 1 - i + length ? 0 : bytes - (pos_byte - 1 - i + length)); } if (!LEADING_CODE_P (string[i])) return 0; bytes = BYTES_BY_CHAR_HEAD (string[i]) - (length - i); bufp++, pos_byte++; while (!CHAR_HEAD_P (*bufp)) bufp++, pos_byte++; return (bytes <= pos_byte - opos_byte ? bytes : pos_byte - opos_byte); } #endif /* Insert a sequence of NCHARS chars which occupy NBYTES bytes starting at STRING. INHERIT, PREPARE and BEFORE_MARKERS are the same as in insert_1. */ void insert_1_both (const unsigned char *string, EMACS_INT nchars, EMACS_INT nbytes, int inherit, int prepare, int before_markers) { if (nchars == 0) return; if (NILP (current_buffer->enable_multibyte_characters)) nchars = nbytes; if (prepare) /* Do this before moving and increasing the gap, because the before-change hooks might move the gap or make it smaller. */ prepare_to_modify_buffer (PT, PT, NULL); if (PT != GPT) move_gap_both (PT, PT_BYTE); if (GAP_SIZE < nbytes) make_gap (nbytes - GAP_SIZE); #ifdef BYTE_COMBINING_DEBUG if (count_combining_before (string, nbytes, PT, PT_BYTE) || count_combining_after (string, nbytes, PT, PT_BYTE)) abort (); #endif /* Record deletion of the surrounding text that combines with the insertion. This, together with recording the insertion, will add up to the right stuff in the undo list. */ record_insert (PT, nchars); MODIFF++; CHARS_MODIFF = MODIFF; memcpy (GPT_ADDR, string, nbytes); GAP_SIZE -= nbytes; GPT += nchars; ZV += nchars; Z += nchars; GPT_BYTE += nbytes; ZV_BYTE += nbytes; Z_BYTE += nbytes; if (GAP_SIZE > 0) *(GPT_ADDR) = 0; /* Put an anchor. */ if (GPT_BYTE < GPT) abort (); /* The insert may have been in the unchanged region, so check again. */ if (Z - GPT < END_UNCHANGED) END_UNCHANGED = Z - GPT; adjust_overlays_for_insert (PT, nchars); adjust_markers_for_insert (PT, PT_BYTE, PT + nchars, PT_BYTE + nbytes, before_markers); if (BUF_INTERVALS (current_buffer) != 0) offset_intervals (current_buffer, PT, nchars); if (!inherit && BUF_INTERVALS (current_buffer) != 0) set_text_properties (make_number (PT), make_number (PT + nchars), Qnil, Qnil, Qnil); adjust_point (nchars, nbytes); CHECK_MARKERS (); } /* Insert the part of the text of STRING, a Lisp object assumed to be of type string, consisting of the LENGTH characters (LENGTH_BYTE bytes) starting at position POS / POS_BYTE. If the text of STRING has properties, copy them into the buffer. It does not work to use `insert' for this, because a GC could happen before we copy the stuff into the buffer, and relocate the string without insert noticing. */ void insert_from_string (Lisp_Object string, EMACS_INT pos, EMACS_INT pos_byte, EMACS_INT length, EMACS_INT length_byte, int inherit) { EMACS_INT opoint = PT; if (SCHARS (string) == 0) return; insert_from_string_1 (string, pos, pos_byte, length, length_byte, inherit, 0); signal_after_change (opoint, 0, PT - opoint); update_compositions (opoint, PT, CHECK_BORDER); } /* Like `insert_from_string' except that all markers pointing at the place where the insertion happens are adjusted to point after it. */ void insert_from_string_before_markers (Lisp_Object string, EMACS_INT pos, EMACS_INT pos_byte, EMACS_INT length, EMACS_INT length_byte, int inherit) { EMACS_INT opoint = PT; if (SCHARS (string) == 0) return; insert_from_string_1 (string, pos, pos_byte, length, length_byte, inherit, 1); signal_after_change (opoint, 0, PT - opoint); update_compositions (opoint, PT, CHECK_BORDER); } /* Subroutine of the insertion functions above. */ static void insert_from_string_1 (Lisp_Object string, EMACS_INT pos, EMACS_INT pos_byte, EMACS_INT nchars, EMACS_INT nbytes, int inherit, int before_markers) { struct gcpro gcpro1; EMACS_INT outgoing_nbytes = nbytes; INTERVAL intervals; /* Make OUTGOING_NBYTES describe the text as it will be inserted in this buffer. */ if (NILP (current_buffer->enable_multibyte_characters)) outgoing_nbytes = nchars; else if (! STRING_MULTIBYTE (string)) outgoing_nbytes = count_size_as_multibyte (SDATA (string) + pos_byte, nbytes); GCPRO1 (string); /* Do this before moving and increasing the gap, because the before-change hooks might move the gap or make it smaller. */ prepare_to_modify_buffer (PT, PT, NULL); if (PT != GPT) move_gap_both (PT, PT_BYTE); if (GAP_SIZE < outgoing_nbytes) make_gap (outgoing_nbytes - GAP_SIZE); UNGCPRO; /* Copy the string text into the buffer, perhaps converting between single-byte and multibyte. */ copy_text (SDATA (string) + pos_byte, GPT_ADDR, nbytes, STRING_MULTIBYTE (string), ! NILP (current_buffer->enable_multibyte_characters)); #ifdef BYTE_COMBINING_DEBUG /* We have copied text into the gap, but we have not altered PT or PT_BYTE yet. So we can pass PT and PT_BYTE to these functions and get the same results as we would have got earlier on. Meanwhile, PT_ADDR does point to the text that has been stored by copy_text. */ if (count_combining_before (GPT_ADDR, outgoing_nbytes, PT, PT_BYTE) || count_combining_after (GPT_ADDR, outgoing_nbytes, PT, PT_BYTE)) abort (); #endif record_insert (PT, nchars); MODIFF++; CHARS_MODIFF = MODIFF; GAP_SIZE -= outgoing_nbytes; GPT += nchars; ZV += nchars; Z += nchars; GPT_BYTE += outgoing_nbytes; ZV_BYTE += outgoing_nbytes; Z_BYTE += outgoing_nbytes; if (GAP_SIZE > 0) *(GPT_ADDR) = 0; /* Put an anchor. */ if (GPT_BYTE < GPT) abort (); /* The insert may have been in the unchanged region, so check again. */ if (Z - GPT < END_UNCHANGED) END_UNCHANGED = Z - GPT; adjust_overlays_for_insert (PT, nchars); adjust_markers_for_insert (PT, PT_BYTE, PT + nchars, PT_BYTE + outgoing_nbytes, before_markers); offset_intervals (current_buffer, PT, nchars); intervals = STRING_INTERVALS (string); /* Get the intervals for the part of the string we are inserting. */ if (nbytes < SBYTES (string)) intervals = copy_intervals (intervals, pos, nchars); /* Insert those intervals. */ graft_intervals_into_buffer (intervals, PT, nchars, current_buffer, inherit); adjust_point (nchars, outgoing_nbytes); CHECK_MARKERS (); } /* Insert a sequence of NCHARS chars which occupy NBYTES bytes starting at GPT_ADDR. */ void insert_from_gap (EMACS_INT nchars, EMACS_INT nbytes) { if (NILP (current_buffer->enable_multibyte_characters)) nchars = nbytes; record_insert (GPT, nchars); MODIFF++; GAP_SIZE -= nbytes; GPT += nchars; ZV += nchars; Z += nchars; GPT_BYTE += nbytes; ZV_BYTE += nbytes; Z_BYTE += nbytes; if (GAP_SIZE > 0) *(GPT_ADDR) = 0; /* Put an anchor. */ if (GPT_BYTE < GPT) abort (); adjust_overlays_for_insert (GPT - nchars, nchars); adjust_markers_for_insert (GPT - nchars, GPT_BYTE - nbytes, GPT, GPT_BYTE, 0); if (BUF_INTERVALS (current_buffer) != 0) { offset_intervals (current_buffer, GPT - nchars, nchars); graft_intervals_into_buffer (NULL_INTERVAL, GPT - nchars, nchars, current_buffer, 0); } if (GPT - nchars < PT) adjust_point (nchars, nbytes); CHECK_MARKERS (); } /* Insert text from BUF, NCHARS characters starting at CHARPOS, into the current buffer. If the text in BUF has properties, they are absorbed into the current buffer. It does not work to use `insert' for this, because a malloc could happen and relocate BUF's text before the copy happens. */ void insert_from_buffer (struct buffer *buf, EMACS_INT charpos, EMACS_INT nchars, int inherit) { EMACS_INT opoint = PT; insert_from_buffer_1 (buf, charpos, nchars, inherit); signal_after_change (opoint, 0, PT - opoint); update_compositions (opoint, PT, CHECK_BORDER); } static void insert_from_buffer_1 (struct buffer *buf, EMACS_INT from, EMACS_INT nchars, int inherit) { register Lisp_Object temp; EMACS_INT chunk, chunk_expanded; EMACS_INT from_byte = buf_charpos_to_bytepos (buf, from); EMACS_INT to_byte = buf_charpos_to_bytepos (buf, from + nchars); EMACS_INT incoming_nbytes = to_byte - from_byte; EMACS_INT outgoing_nbytes = incoming_nbytes; INTERVAL intervals; /* Make OUTGOING_NBYTES describe the text as it will be inserted in this buffer. */ if (NILP (current_buffer->enable_multibyte_characters)) outgoing_nbytes = nchars; else if (NILP (buf->enable_multibyte_characters)) { EMACS_INT outgoing_before_gap = 0; EMACS_INT outgoing_after_gap = 0; if (from < BUF_GPT (buf)) { chunk = BUF_GPT_BYTE (buf) - from_byte; if (chunk > incoming_nbytes) chunk = incoming_nbytes; outgoing_before_gap = count_size_as_multibyte (BUF_BYTE_ADDRESS (buf, from_byte), chunk); } else chunk = 0; if (chunk < incoming_nbytes) outgoing_after_gap = count_size_as_multibyte (BUF_BYTE_ADDRESS (buf, from_byte + chunk), incoming_nbytes - chunk); outgoing_nbytes = outgoing_before_gap + outgoing_after_gap; } /* Make sure point-max won't overflow after this insertion. */ XSETINT (temp, outgoing_nbytes + Z); if (outgoing_nbytes + Z != XINT (temp)) error ("Maximum buffer size exceeded"); /* Do this before moving and increasing the gap, because the before-change hooks might move the gap or make it smaller. */ prepare_to_modify_buffer (PT, PT, NULL); if (PT != GPT) move_gap_both (PT, PT_BYTE); if (GAP_SIZE < outgoing_nbytes) make_gap (outgoing_nbytes - GAP_SIZE); if (from < BUF_GPT (buf)) { chunk = BUF_GPT_BYTE (buf) - from_byte; if (chunk > incoming_nbytes) chunk = incoming_nbytes; /* Record number of output bytes, so we know where to put the output from the second copy_text. */ chunk_expanded = copy_text (BUF_BYTE_ADDRESS (buf, from_byte), GPT_ADDR, chunk, ! NILP (buf->enable_multibyte_characters), ! NILP (current_buffer->enable_multibyte_characters)); } else chunk_expanded = chunk = 0; if (chunk < incoming_nbytes) copy_text (BUF_BYTE_ADDRESS (buf, from_byte + chunk), GPT_ADDR + chunk_expanded, incoming_nbytes - chunk, ! NILP (buf->enable_multibyte_characters), ! NILP (current_buffer->enable_multibyte_characters)); #ifdef BYTE_COMBINING_DEBUG /* We have copied text into the gap, but we have not altered PT or PT_BYTE yet. So we can pass PT and PT_BYTE to these functions and get the same results as we would have got earlier on. Meanwhile, GPT_ADDR does point to the text that has been stored by copy_text. */ if (count_combining_before (GPT_ADDR, outgoing_nbytes, PT, PT_BYTE) || count_combining_after (GPT_ADDR, outgoing_nbytes, PT, PT_BYTE)) abort (); #endif record_insert (PT, nchars); MODIFF++; CHARS_MODIFF = MODIFF; GAP_SIZE -= outgoing_nbytes; GPT += nchars; ZV += nchars; Z += nchars; GPT_BYTE += outgoing_nbytes; ZV_BYTE += outgoing_nbytes; Z_BYTE += outgoing_nbytes; if (GAP_SIZE > 0) *(GPT_ADDR) = 0; /* Put an anchor. */ if (GPT_BYTE < GPT) abort (); /* The insert may have been in the unchanged region, so check again. */ if (Z - GPT < END_UNCHANGED) END_UNCHANGED = Z - GPT; adjust_overlays_for_insert (PT, nchars); adjust_markers_for_insert (PT, PT_BYTE, PT + nchars, PT_BYTE + outgoing_nbytes, 0); if (BUF_INTERVALS (current_buffer) != 0) offset_intervals (current_buffer, PT, nchars); /* Get the intervals for the part of the string we are inserting. */ intervals = BUF_INTERVALS (buf); if (nchars < BUF_Z (buf) - BUF_BEG (buf)) { if (buf == current_buffer && PT <= from) from += nchars; intervals = copy_intervals (intervals, from, nchars); } /* Insert those intervals. */ graft_intervals_into_buffer (intervals, PT, nchars, current_buffer, inherit); adjust_point (nchars, outgoing_nbytes); } /* Record undo information and adjust markers and position keepers for a replacement of a text PREV_TEXT at FROM to a new text of LEN chars (LEN_BYTE bytes) which resides in the gap just after GPT_ADDR. PREV_TEXT nil means the new text was just inserted. */ void adjust_after_replace (EMACS_INT from, EMACS_INT from_byte, Lisp_Object prev_text, EMACS_INT len, EMACS_INT len_byte) { EMACS_INT nchars_del = 0, nbytes_del = 0; #ifdef BYTE_COMBINING_DEBUG if (count_combining_before (GPT_ADDR, len_byte, from, from_byte) || count_combining_after (GPT_ADDR, len_byte, from, from_byte)) abort (); #endif if (STRINGP (prev_text)) { nchars_del = SCHARS (prev_text); nbytes_del = SBYTES (prev_text); } /* Update various buffer positions for the new text. */ GAP_SIZE -= len_byte; ZV += len; Z+= len; ZV_BYTE += len_byte; Z_BYTE += len_byte; GPT += len; GPT_BYTE += len_byte; if (GAP_SIZE > 0) *(GPT_ADDR) = 0; /* Put an anchor. */ if (nchars_del > 0) adjust_markers_for_replace (from, from_byte, nchars_del, nbytes_del, len, len_byte); else adjust_markers_for_insert (from, from_byte, from + len, from_byte + len_byte, 0); if (! EQ (current_buffer->undo_list, Qt)) { if (nchars_del > 0) record_delete (from, prev_text); record_insert (from, len); } if (len > nchars_del) adjust_overlays_for_insert (from, len - nchars_del); else if (len < nchars_del) adjust_overlays_for_delete (from, nchars_del - len); if (BUF_INTERVALS (current_buffer) != 0) { offset_intervals (current_buffer, from, len - nchars_del); } if (from < PT) adjust_point (len - nchars_del, len_byte - nbytes_del); /* As byte combining will decrease Z, we must check this again. */ if (Z - GPT < END_UNCHANGED) END_UNCHANGED = Z - GPT; CHECK_MARKERS (); if (len == 0) evaporate_overlays (from); MODIFF++; CHARS_MODIFF = MODIFF; } /* Like adjust_after_replace, but doesn't require PREV_TEXT. This is for use when undo is not enabled in the current buffer. */ void adjust_after_replace_noundo (EMACS_INT from, EMACS_INT from_byte, EMACS_INT nchars_del, EMACS_INT nbytes_del, EMACS_INT len, EMACS_INT len_byte) { #ifdef BYTE_COMBINING_DEBUG if (count_combining_before (GPT_ADDR, len_byte, from, from_byte) || count_combining_after (GPT_ADDR, len_byte, from, from_byte)) abort (); #endif /* Update various buffer positions for the new text. */ GAP_SIZE -= len_byte; ZV += len; Z+= len; ZV_BYTE += len_byte; Z_BYTE += len_byte; GPT += len; GPT_BYTE += len_byte; if (GAP_SIZE > 0) *(GPT_ADDR) = 0; /* Put an anchor. */ if (nchars_del > 0) adjust_markers_for_replace (from, from_byte, nchars_del, nbytes_del, len, len_byte); else adjust_markers_for_insert (from, from_byte, from + len, from_byte + len_byte, 0); if (len > nchars_del) adjust_overlays_for_insert (from, len - nchars_del); else if (len < nchars_del) adjust_overlays_for_delete (from, nchars_del - len); if (BUF_INTERVALS (current_buffer) != 0) { offset_intervals (current_buffer, from, len - nchars_del); } if (from < PT) adjust_point (len - nchars_del, len_byte - nbytes_del); /* As byte combining will decrease Z, we must check this again. */ if (Z - GPT < END_UNCHANGED) END_UNCHANGED = Z - GPT; CHECK_MARKERS (); if (len == 0) evaporate_overlays (from); MODIFF++; CHARS_MODIFF = MODIFF; } /* Record undo information, adjust markers and position keepers for an insertion of a text from FROM (FROM_BYTE) to TO (TO_BYTE). The text already exists in the current buffer but character length (TO - FROM) may be incorrect, the correct length is NEWLEN. */ void adjust_after_insert (EMACS_INT from, EMACS_INT from_byte, EMACS_INT to, EMACS_INT to_byte, EMACS_INT newlen) { EMACS_INT len = to - from, len_byte = to_byte - from_byte; if (GPT != to) move_gap_both (to, to_byte); GAP_SIZE += len_byte; GPT -= len; GPT_BYTE -= len_byte; ZV -= len; ZV_BYTE -= len_byte; Z -= len; Z_BYTE -= len_byte; adjust_after_replace (from, from_byte, Qnil, newlen, len_byte); } /* Replace the text from character positions FROM to TO with NEW, If PREPARE is nonzero, call prepare_to_modify_buffer. If INHERIT, the newly inserted text should inherit text properties from the surrounding non-deleted text. */ /* Note that this does not yet handle markers quite right. Also it needs to record a single undo-entry that does a replacement rather than a separate delete and insert. That way, undo will also handle markers properly. But if MARKERS is 0, don't relocate markers. */ void replace_range (EMACS_INT from, EMACS_INT to, Lisp_Object new, int prepare, int inherit, int markers) { EMACS_INT inschars = SCHARS (new); EMACS_INT insbytes = SBYTES (new); EMACS_INT from_byte, to_byte; EMACS_INT nbytes_del, nchars_del; register Lisp_Object temp; struct gcpro gcpro1; INTERVAL intervals; EMACS_INT outgoing_insbytes = insbytes; Lisp_Object deletion; CHECK_MARKERS (); GCPRO1 (new); deletion = Qnil; if (prepare) { EMACS_INT range_length = to - from; prepare_to_modify_buffer (from, to, &from); to = from + range_length; } UNGCPRO; /* Make args be valid */ if (from < BEGV) from = BEGV; if (to > ZV) to = ZV; from_byte = CHAR_TO_BYTE (from); to_byte = CHAR_TO_BYTE (to); nchars_del = to - from; nbytes_del = to_byte - from_byte; if (nbytes_del <= 0 && insbytes == 0) return; /* Make OUTGOING_INSBYTES describe the text as it will be inserted in this buffer. */ if (NILP (current_buffer->enable_multibyte_characters)) outgoing_insbytes = inschars; else if (! STRING_MULTIBYTE (new)) outgoing_insbytes = count_size_as_multibyte (SDATA (new), insbytes); /* Make sure point-max won't overflow after this insertion. */ XSETINT (temp, Z_BYTE - nbytes_del + insbytes); if (Z_BYTE - nbytes_del + insbytes != XINT (temp)) error ("Maximum buffer size exceeded"); GCPRO1 (new); /* Make sure the gap is somewhere in or next to what we are deleting. */ if (from > GPT) gap_right (from, from_byte); if (to < GPT) gap_left (to, to_byte, 0); /* Even if we don't record for undo, we must keep the original text because we may have to recover it because of inappropriate byte combining. */ if (! EQ (current_buffer->undo_list, Qt)) deletion = make_buffer_string_both (from, from_byte, to, to_byte, 1); GAP_SIZE += nbytes_del; ZV -= nchars_del; Z -= nchars_del; ZV_BYTE -= nbytes_del; Z_BYTE -= nbytes_del; GPT = from; GPT_BYTE = from_byte; if (GAP_SIZE > 0) *(GPT_ADDR) = 0; /* Put an anchor. */ if (GPT_BYTE < GPT) abort (); if (GPT - BEG < BEG_UNCHANGED) BEG_UNCHANGED = GPT - BEG; if (Z - GPT < END_UNCHANGED) END_UNCHANGED = Z - GPT; if (GAP_SIZE < insbytes) make_gap (insbytes - GAP_SIZE); /* Copy the string text into the buffer, perhaps converting between single-byte and multibyte. */ copy_text (SDATA (new), GPT_ADDR, insbytes, STRING_MULTIBYTE (new), ! NILP (current_buffer->enable_multibyte_characters)); #ifdef BYTE_COMBINING_DEBUG /* We have copied text into the gap, but we have not marked it as part of the buffer. So we can use the old FROM and FROM_BYTE here, for both the previous text and the following text. Meanwhile, GPT_ADDR does point to the text that has been stored by copy_text. */ if (count_combining_before (GPT_ADDR, outgoing_insbytes, from, from_byte) || count_combining_after (GPT_ADDR, outgoing_insbytes, from, from_byte)) abort (); #endif if (! EQ (current_buffer->undo_list, Qt)) { /* Record the insertion first, so that when we undo, the deletion will be undone first. Thus, undo will insert before deleting, and thus will keep the markers before and after this text separate. */ record_insert (from + SCHARS (deletion), inschars); record_delete (from, deletion); } GAP_SIZE -= outgoing_insbytes; GPT += inschars; ZV += inschars; Z += inschars; GPT_BYTE += outgoing_insbytes; ZV_BYTE += outgoing_insbytes; Z_BYTE += outgoing_insbytes; if (GAP_SIZE > 0) *(GPT_ADDR) = 0; /* Put an anchor. */ if (GPT_BYTE < GPT) abort (); /* Adjust the overlay center as needed. This must be done after adjusting the markers that bound the overlays. */ adjust_overlays_for_delete (from, nchars_del); adjust_overlays_for_insert (from, inschars); /* Adjust markers for the deletion and the insertion. */ if (markers) adjust_markers_for_replace (from, from_byte, nchars_del, nbytes_del, inschars, outgoing_insbytes); offset_intervals (current_buffer, from, inschars - nchars_del); /* Get the intervals for the part of the string we are inserting-- not including the combined-before bytes. */ intervals = STRING_INTERVALS (new); /* Insert those intervals. */ graft_intervals_into_buffer (intervals, from, inschars, current_buffer, inherit); /* Relocate point as if it were a marker. */ if (from < PT) adjust_point ((from + inschars - (PT < to ? PT : to)), (from_byte + outgoing_insbytes - (PT_BYTE < to_byte ? PT_BYTE : to_byte))); if (outgoing_insbytes == 0) evaporate_overlays (from); CHECK_MARKERS (); MODIFF++; CHARS_MODIFF = MODIFF; UNGCPRO; signal_after_change (from, nchars_del, GPT - from); update_compositions (from, GPT, CHECK_BORDER); } /* Replace the text from character positions FROM to TO with the text in INS of length INSCHARS. Keep the text properties that applied to the old characters (extending them to all the new chars if there are more new chars). Note that this does not yet handle markers quite right. If MARKERS is nonzero, relocate markers. Unlike most functions at this level, never call prepare_to_modify_buffer and never call signal_after_change. */ void replace_range_2 (EMACS_INT from, EMACS_INT from_byte, EMACS_INT to, EMACS_INT to_byte, const char *ins, EMACS_INT inschars, EMACS_INT insbytes, int markers) { EMACS_INT nbytes_del, nchars_del; Lisp_Object temp; CHECK_MARKERS (); nchars_del = to - from; nbytes_del = to_byte - from_byte; if (nbytes_del <= 0 && insbytes == 0) return; /* Make sure point-max won't overflow after this insertion. */ XSETINT (temp, Z_BYTE - nbytes_del + insbytes); if (Z_BYTE - nbytes_del + insbytes != XINT (temp)) error ("Maximum buffer size exceeded"); /* Make sure the gap is somewhere in or next to what we are deleting. */ if (from > GPT) gap_right (from, from_byte); if (to < GPT) gap_left (to, to_byte, 0); GAP_SIZE += nbytes_del; ZV -= nchars_del; Z -= nchars_del; ZV_BYTE -= nbytes_del; Z_BYTE -= nbytes_del; GPT = from; GPT_BYTE = from_byte; if (GAP_SIZE > 0) *(GPT_ADDR) = 0; /* Put an anchor. */ if (GPT_BYTE < GPT) abort (); if (GPT - BEG < BEG_UNCHANGED) BEG_UNCHANGED = GPT - BEG; if (Z - GPT < END_UNCHANGED) END_UNCHANGED = Z - GPT; if (GAP_SIZE < insbytes) make_gap (insbytes - GAP_SIZE); /* Copy the replacement text into the buffer. */ memcpy (GPT_ADDR, ins, insbytes); #ifdef BYTE_COMBINING_DEBUG /* We have copied text into the gap, but we have not marked it as part of the buffer. So we can use the old FROM and FROM_BYTE here, for both the previous text and the following text. Meanwhile, GPT_ADDR does point to the text that has been stored by copy_text. */ if (count_combining_before (GPT_ADDR, insbytes, from, from_byte) || count_combining_after (GPT_ADDR, insbytes, from, from_byte)) abort (); #endif GAP_SIZE -= insbytes; GPT += inschars; ZV += inschars; Z += inschars; GPT_BYTE += insbytes; ZV_BYTE += insbytes; Z_BYTE += insbytes; if (GAP_SIZE > 0) *(GPT_ADDR) = 0; /* Put an anchor. */ if (GPT_BYTE < GPT) abort (); /* Adjust the overlay center as needed. This must be done after adjusting the markers that bound the overlays. */ if (nchars_del != inschars) { adjust_overlays_for_insert (from, inschars); adjust_overlays_for_delete (from + inschars, nchars_del); } /* Adjust markers for the deletion and the insertion. */ if (markers && ! (nchars_del == 1 && inschars == 1 && nbytes_del == insbytes)) adjust_markers_for_replace (from, from_byte, nchars_del, nbytes_del, inschars, insbytes); offset_intervals (current_buffer, from, inschars - nchars_del); /* Relocate point as if it were a marker. */ if (from < PT && (nchars_del != inschars || nbytes_del != insbytes)) { if (PT < to) /* PT was within the deleted text. Move it to FROM. */ adjust_point (from - PT, from_byte - PT_BYTE); else adjust_point (inschars - nchars_del, insbytes - nbytes_del); } if (insbytes == 0) evaporate_overlays (from); CHECK_MARKERS (); MODIFF++; CHARS_MODIFF = MODIFF; } /* Delete characters in current buffer from FROM up to (but not including) TO. If TO comes before FROM, we delete nothing. */ void del_range (EMACS_INT from, EMACS_INT to) { del_range_1 (from, to, 1, 0); } /* Like del_range; PREPARE says whether to call prepare_to_modify_buffer. RET_STRING says to return the deleted text. */ Lisp_Object del_range_1 (EMACS_INT from, EMACS_INT to, int prepare, int ret_string) { EMACS_INT from_byte, to_byte; Lisp_Object deletion; struct gcpro gcpro1; /* Make args be valid */ if (from < BEGV) from = BEGV; if (to > ZV) to = ZV; if (to <= from) return Qnil; if (prepare) { EMACS_INT range_length = to - from; prepare_to_modify_buffer (from, to, &from); to = min (ZV, from + range_length); } from_byte = CHAR_TO_BYTE (from); to_byte = CHAR_TO_BYTE (to); deletion = del_range_2 (from, from_byte, to, to_byte, ret_string); GCPRO1(deletion); signal_after_change (from, to - from, 0); update_compositions (from, from, CHECK_HEAD); UNGCPRO; return deletion; } /* Like del_range_1 but args are byte positions, not char positions. */ void del_range_byte (EMACS_INT from_byte, EMACS_INT to_byte, int prepare) { EMACS_INT from, to; /* Make args be valid */ if (from_byte < BEGV_BYTE) from_byte = BEGV_BYTE; if (to_byte > ZV_BYTE) to_byte = ZV_BYTE; if (to_byte <= from_byte) return; from = BYTE_TO_CHAR (from_byte); to = BYTE_TO_CHAR (to_byte); if (prepare) { EMACS_INT old_from = from, old_to = Z - to; EMACS_INT range_length = to - from; prepare_to_modify_buffer (from, to, &from); to = from + range_length; if (old_from != from) from_byte = CHAR_TO_BYTE (from); if (to > ZV) { to = ZV; to_byte = ZV_BYTE; } else if (old_to == Z - to) to_byte = CHAR_TO_BYTE (to); } del_range_2 (from, from_byte, to, to_byte, 0); signal_after_change (from, to - from, 0); update_compositions (from, from, CHECK_HEAD); } /* Like del_range_1, but positions are specified both as charpos and bytepos. */ void del_range_both (EMACS_INT from, EMACS_INT from_byte, EMACS_INT to, EMACS_INT to_byte, int prepare) { /* Make args be valid */ if (from_byte < BEGV_BYTE) from_byte = BEGV_BYTE; if (to_byte > ZV_BYTE) to_byte = ZV_BYTE; if (to_byte <= from_byte) return; if (from < BEGV) from = BEGV; if (to > ZV) to = ZV; if (prepare) { EMACS_INT old_from = from, old_to = Z - to; EMACS_INT range_length = to - from; prepare_to_modify_buffer (from, to, &from); to = from + range_length; if (old_from != from) from_byte = CHAR_TO_BYTE (from); if (to > ZV) { to = ZV; to_byte = ZV_BYTE; } else if (old_to == Z - to) to_byte = CHAR_TO_BYTE (to); } del_range_2 (from, from_byte, to, to_byte, 0); signal_after_change (from, to - from, 0); update_compositions (from, from, CHECK_HEAD); } /* Delete a range of text, specified both as character positions and byte positions. FROM and TO are character positions, while FROM_BYTE and TO_BYTE are byte positions. If RET_STRING is true, the deleted area is returned as a string. */ Lisp_Object del_range_2 (EMACS_INT from, EMACS_INT from_byte, EMACS_INT to, EMACS_INT to_byte, int ret_string) { register EMACS_INT nbytes_del, nchars_del; Lisp_Object deletion; CHECK_MARKERS (); nchars_del = to - from; nbytes_del = to_byte - from_byte; /* Make sure the gap is somewhere in or next to what we are deleting. */ if (from > GPT) gap_right (from, from_byte); if (to < GPT) gap_left (to, to_byte, 0); #ifdef BYTE_COMBINING_DEBUG if (count_combining_before (BUF_BYTE_ADDRESS (current_buffer, to_byte), Z_BYTE - to_byte, from, from_byte)) abort (); #endif if (ret_string || ! EQ (current_buffer->undo_list, Qt)) deletion = make_buffer_string_both (from, from_byte, to, to_byte, 1); else deletion = Qnil; /* Relocate all markers pointing into the new, larger gap to point at the end of the text before the gap. Do this before recording the deletion, so that undo handles this after reinserting the text. */ adjust_markers_for_delete (from, from_byte, to, to_byte); if (! EQ (current_buffer->undo_list, Qt)) record_delete (from, deletion); MODIFF++; CHARS_MODIFF = MODIFF; /* Relocate point as if it were a marker. */ if (from < PT) adjust_point (from - (PT < to ? PT : to), from_byte - (PT_BYTE < to_byte ? PT_BYTE : to_byte)); offset_intervals (current_buffer, from, - nchars_del); /* Adjust the overlay center as needed. This must be done after adjusting the markers that bound the overlays. */ adjust_overlays_for_delete (from, nchars_del); GAP_SIZE += nbytes_del; ZV_BYTE -= nbytes_del; Z_BYTE -= nbytes_del; ZV -= nchars_del; Z -= nchars_del; GPT = from; GPT_BYTE = from_byte; if (GAP_SIZE > 0 && !current_buffer->text->inhibit_shrinking) /* Put an anchor, unless called from decode_coding_object which needs to access the previous gap contents. */ *(GPT_ADDR) = 0; if (GPT_BYTE < GPT) abort (); if (GPT - BEG < BEG_UNCHANGED) BEG_UNCHANGED = GPT - BEG; if (Z - GPT < END_UNCHANGED) END_UNCHANGED = Z - GPT; CHECK_MARKERS (); evaporate_overlays (from); return deletion; } /* Call this if you're about to change the region of BUFFER from character positions START to END. This checks the read-only properties of the region, calls the necessary modification hooks, and warns the next redisplay that it should pay attention to that area. If PRESERVE_CHARS_MODIFF is non-zero, do not update CHARS_MODIFF. Otherwise set CHARS_MODIFF to the new value of MODIFF. */ void modify_region (struct buffer *buffer, EMACS_INT start, EMACS_INT end, int preserve_chars_modiff) { struct buffer *old_buffer = current_buffer; if (buffer != old_buffer) set_buffer_internal (buffer); prepare_to_modify_buffer (start, end, NULL); BUF_COMPUTE_UNCHANGED (buffer, start - 1, end); if (MODIFF <= SAVE_MODIFF) record_first_change (); MODIFF++; if (! preserve_chars_modiff) CHARS_MODIFF = MODIFF; buffer->point_before_scroll = Qnil; if (buffer != old_buffer) set_buffer_internal (old_buffer); } /* Check that it is okay to modify the buffer between START and END, which are char positions. Run the before-change-function, if any. If intervals are in use, verify that the text to be modified is not read-only, and call any modification properties the text may have. If PRESERVE_PTR is nonzero, we relocate *PRESERVE_PTR by holding its value temporarily in a marker. */ void prepare_to_modify_buffer (EMACS_INT start, EMACS_INT end, EMACS_INT *preserve_ptr) { struct buffer *base_buffer; if (!NILP (current_buffer->read_only)) Fbarf_if_buffer_read_only (); /* Let redisplay consider other windows than selected_window if modifying another buffer. */ if (XBUFFER (XWINDOW (selected_window)->buffer) != current_buffer) ++windows_or_buffers_changed; if (BUF_INTERVALS (current_buffer) != 0) { if (preserve_ptr) { Lisp_Object preserve_marker; struct gcpro gcpro1; preserve_marker = Fcopy_marker (make_number (*preserve_ptr), Qnil); GCPRO1 (preserve_marker); verify_interval_modification (current_buffer, start, end); *preserve_ptr = marker_position (preserve_marker); unchain_marker (XMARKER (preserve_marker)); UNGCPRO; } else verify_interval_modification (current_buffer, start, end); } /* For indirect buffers, use the base buffer to check clashes. */ if (current_buffer->base_buffer != 0) base_buffer = current_buffer->base_buffer; else base_buffer = current_buffer; #ifdef CLASH_DETECTION if (!NILP (base_buffer->file_truename) /* Make binding buffer-file-name to nil effective. */ && !NILP (base_buffer->filename) && SAVE_MODIFF >= MODIFF) lock_file (base_buffer->file_truename); #else /* At least warn if this file has changed on disk since it was visited. */ if (!NILP (base_buffer->filename) && SAVE_MODIFF >= MODIFF && NILP (Fverify_visited_file_modtime (Fcurrent_buffer ())) && !NILP (Ffile_exists_p (base_buffer->filename))) call1 (intern ("ask-user-about-supersession-threat"), base_buffer->filename); #endif /* not CLASH_DETECTION */ /* If `select-active-regions' is non-nil, save the region text. */ if (!NILP (current_buffer->mark_active) && !inhibit_modification_hooks && XMARKER (current_buffer->mark)->buffer && NILP (Vsaved_region_selection) && (EQ (Vselect_active_regions, Qonly) ? EQ (CAR_SAFE (Vtransient_mark_mode), Qonly) : (!NILP (Vselect_active_regions) && !NILP (Vtransient_mark_mode)))) { EMACS_INT b = XMARKER (current_buffer->mark)->charpos; EMACS_INT e = PT; if (b < e) Vsaved_region_selection = make_buffer_string (b, e, 0); else if (b > e) Vsaved_region_selection = make_buffer_string (e, b, 0); } signal_before_change (start, end, preserve_ptr); if (current_buffer->newline_cache) invalidate_region_cache (current_buffer, current_buffer->newline_cache, start - BEG, Z - end); if (current_buffer->width_run_cache) invalidate_region_cache (current_buffer, current_buffer->width_run_cache, start - BEG, Z - end); Vdeactivate_mark = Qt; } /* These macros work with an argument named `preserve_ptr' and a local variable named `preserve_marker'. */ #define PRESERVE_VALUE \ if (preserve_ptr && NILP (preserve_marker)) \ preserve_marker = Fcopy_marker (make_number (*preserve_ptr), Qnil) #define RESTORE_VALUE \ if (! NILP (preserve_marker)) \ { \ *preserve_ptr = marker_position (preserve_marker); \ unchain_marker (XMARKER (preserve_marker)); \ } #define PRESERVE_START_END \ if (NILP (start_marker)) \ start_marker = Fcopy_marker (start, Qnil); \ if (NILP (end_marker)) \ end_marker = Fcopy_marker (end, Qnil); #define FETCH_START \ (! NILP (start_marker) ? Fmarker_position (start_marker) : start) #define FETCH_END \ (! NILP (end_marker) ? Fmarker_position (end_marker) : end) /* Set a variable to nil if an error occurred. Don't change the variable if there was no error. VAL is a cons-cell (VARIABLE . NO-ERROR-FLAG). VARIABLE is the variable to maybe set to nil. NO-ERROR-FLAG is nil if there was an error, anything else meaning no error (so this function does nothing). */ Lisp_Object reset_var_on_error (Lisp_Object val) { if (NILP (XCDR (val))) Fset (XCAR (val), Qnil); return Qnil; } /* Signal a change to the buffer immediately before it happens. START_INT and END_INT are the bounds of the text to be changed. If PRESERVE_PTR is nonzero, we relocate *PRESERVE_PTR by holding its value temporarily in a marker. */ void signal_before_change (EMACS_INT start_int, EMACS_INT end_int, EMACS_INT *preserve_ptr) { Lisp_Object start, end; Lisp_Object start_marker, end_marker; Lisp_Object preserve_marker; struct gcpro gcpro1, gcpro2, gcpro3; int count = SPECPDL_INDEX (); if (inhibit_modification_hooks) return; start = make_number (start_int); end = make_number (end_int); preserve_marker = Qnil; start_marker = Qnil; end_marker = Qnil; GCPRO3 (preserve_marker, start_marker, end_marker); specbind (Qinhibit_modification_hooks, Qt); /* If buffer is unmodified, run a special hook for that case. */ if (SAVE_MODIFF >= MODIFF && !NILP (Vfirst_change_hook) && !NILP (Vrun_hooks)) { PRESERVE_VALUE; PRESERVE_START_END; call1 (Vrun_hooks, Qfirst_change_hook); } /* Now run the before-change-functions if any. */ if (!NILP (Vbefore_change_functions)) { Lisp_Object args[3]; Lisp_Object rvoe_arg = Fcons (Qbefore_change_functions, Qnil); PRESERVE_VALUE; PRESERVE_START_END; /* Mark before-change-functions to be reset to nil in case of error. */ record_unwind_protect (reset_var_on_error, rvoe_arg); /* Actually run the hook functions. */ args[0] = Qbefore_change_functions; args[1] = FETCH_START; args[2] = FETCH_END; Frun_hook_with_args (3, args); /* There was no error: unarm the reset_on_error. */ XSETCDR (rvoe_arg, Qt); } if (current_buffer->overlays_before || current_buffer->overlays_after) { PRESERVE_VALUE; report_overlay_modification (FETCH_START, FETCH_END, 0, FETCH_START, FETCH_END, Qnil); } if (! NILP (start_marker)) free_marker (start_marker); if (! NILP (end_marker)) free_marker (end_marker); RESTORE_VALUE; UNGCPRO; unbind_to (count, Qnil); } /* Signal a change immediately after it happens. CHARPOS is the character position of the start of the changed text. LENDEL is the number of characters of the text before the change. (Not the whole buffer; just the part that was changed.) LENINS is the number of characters in that part of the text after the change. */ void signal_after_change (EMACS_INT charpos, EMACS_INT lendel, EMACS_INT lenins) { int count = SPECPDL_INDEX (); if (inhibit_modification_hooks) return; /* If we are deferring calls to the after-change functions and there are no before-change functions, just record the args that we were going to use. */ if (! NILP (Vcombine_after_change_calls) && NILP (Vbefore_change_functions) && !current_buffer->overlays_before && !current_buffer->overlays_after) { Lisp_Object elt; if (!NILP (combine_after_change_list) && current_buffer != XBUFFER (combine_after_change_buffer)) Fcombine_after_change_execute (); elt = Fcons (make_number (charpos - BEG), Fcons (make_number (Z - (charpos - lendel + lenins)), Fcons (make_number (lenins - lendel), Qnil))); combine_after_change_list = Fcons (elt, combine_after_change_list); combine_after_change_buffer = Fcurrent_buffer (); return; } if (!NILP (combine_after_change_list)) Fcombine_after_change_execute (); specbind (Qinhibit_modification_hooks, Qt); if (!NILP (Vafter_change_functions)) { Lisp_Object args[4]; Lisp_Object rvoe_arg = Fcons (Qafter_change_functions, Qnil); /* Mark after-change-functions to be reset to nil in case of error. */ record_unwind_protect (reset_var_on_error, rvoe_arg); /* Actually run the hook functions. */ args[0] = Qafter_change_functions; XSETFASTINT (args[1], charpos); XSETFASTINT (args[2], charpos + lenins); XSETFASTINT (args[3], lendel); Frun_hook_with_args (4, args); /* There was no error: unarm the reset_on_error. */ XSETCDR (rvoe_arg, Qt); } if (current_buffer->overlays_before || current_buffer->overlays_after) report_overlay_modification (make_number (charpos), make_number (charpos + lenins), 1, make_number (charpos), make_number (charpos + lenins), make_number (lendel)); /* After an insertion, call the text properties insert-behind-hooks or insert-in-front-hooks. */ if (lendel == 0) report_interval_modification (make_number (charpos), make_number (charpos + lenins)); unbind_to (count, Qnil); } Lisp_Object Fcombine_after_change_execute_1 (Lisp_Object val) { Vcombine_after_change_calls = val; return val; } DEFUN ("combine-after-change-execute", Fcombine_after_change_execute, Scombine_after_change_execute, 0, 0, 0, doc: /* This function is for use internally in `combine-after-change-calls'. */) (void) { int count = SPECPDL_INDEX (); EMACS_INT beg, end, change; EMACS_INT begpos, endpos; Lisp_Object tail; if (NILP (combine_after_change_list)) return Qnil; /* It is rare for combine_after_change_buffer to be invalid, but possible. It can happen when combine-after-change-calls is non-nil, and insertion calls a file handler (e.g. through lock_file) which scribbles into a temp file -- cyd */ if (!BUFFERP (combine_after_change_buffer) || NILP (XBUFFER (combine_after_change_buffer)->name)) { combine_after_change_list = Qnil; return Qnil; } record_unwind_protect (Fset_buffer, Fcurrent_buffer ()); Fset_buffer (combine_after_change_buffer); /* # chars unchanged at beginning of buffer. */ beg = Z - BEG; /* # chars unchanged at end of buffer. */ end = beg; /* Total amount of insertion (negative for deletion). */ change = 0; /* Scan the various individual changes, accumulating the range info in BEG, END and CHANGE. */ for (tail = combine_after_change_list; CONSP (tail); tail = XCDR (tail)) { Lisp_Object elt; EMACS_INT thisbeg, thisend, thischange; /* Extract the info from the next element. */ elt = XCAR (tail); if (! CONSP (elt)) continue; thisbeg = XINT (XCAR (elt)); elt = XCDR (elt); if (! CONSP (elt)) continue; thisend = XINT (XCAR (elt)); elt = XCDR (elt); if (! CONSP (elt)) continue; thischange = XINT (XCAR (elt)); /* Merge this range into the accumulated range. */ change += thischange; if (thisbeg < beg) beg = thisbeg; if (thisend < end) end = thisend; } /* Get the current start and end positions of the range that was changed. */ begpos = BEG + beg; endpos = Z - end; /* We are about to handle these, so discard them. */ combine_after_change_list = Qnil; /* Now run the after-change functions for real. Turn off the flag that defers them. */ record_unwind_protect (Fcombine_after_change_execute_1, Vcombine_after_change_calls); signal_after_change (begpos, endpos - begpos - change, endpos - begpos); update_compositions (begpos, endpos, CHECK_ALL); return unbind_to (count, Qnil); } void syms_of_insdel (void) { staticpro (&combine_after_change_list); staticpro (&combine_after_change_buffer); combine_after_change_list = Qnil; combine_after_change_buffer = Qnil; DEFVAR_BOOL ("check-markers-debug-flag", &check_markers_debug_flag, doc: /* Non-nil means enable debugging checks for invalid marker positions. */); check_markers_debug_flag = 0; DEFVAR_LISP ("combine-after-change-calls", &Vcombine_after_change_calls, doc: /* Used internally by the `combine-after-change-calls' macro. */); Vcombine_after_change_calls = Qnil; DEFVAR_BOOL ("inhibit-modification-hooks", &inhibit_modification_hooks, doc: /* Non-nil means don't run any of the hooks that respond to buffer changes. This affects `before-change-functions' and `after-change-functions', as well as hooks attached to text properties and overlays. */); inhibit_modification_hooks = 0; Qinhibit_modification_hooks = intern_c_string ("inhibit-modification-hooks"); staticpro (&Qinhibit_modification_hooks); defsubr (&Scombine_after_change_execute); }