Mercurial > emacs
view admin/quick-install-emacs @ 67969:3ca8b2234237
* mh-customize.el: Sync docstrings with manual for faces and sort them
alphabetically.
(mh-faces): Move below mh-hooks. (mh-folder-faces, mh-index-faces,
mh-letter-faces)
(mh-show-faces, mh-speed-faces): Delete. Organize faces like hooks.
(mh-speed-update-interval): Fix group (mh-speedbar, not mh-speed).
(facemenu-unlisted-faces): Might as well ignore all MH-E faces.
(mh-folder-body-face, mh-folder-cur-msg-face)
(mh-folder-cur-msg-number-face, mh-folder-date-face)
(mh-folder-followup-face, mh-folder-msg-number-face)
(mh-folder-deleted-face, mh-folder-refiled-face)
(mh-folder-subject-face, mh-folder-address-face)
(mh-folder-scan-format-face, mh-folder-to-face) (mh-index-folder-face,
mh-show-cc-face, mh-show-date-face) (mh-show-header-face,
mh-show-pgg-good-face) (mh-show-pgg-unknown-face,
mh-show-pgg-bad-face)
(mh-show-to-face, mh-show-from-face, mh-show-subject-face): Delete.
(mh-folder-cur-msg): Unused. Delete.
(mh-folder-address): Use defface; inherit from mh-folder-subject.
(mh-folder-body, mh-folder-cur-msg-number, mh-folder-date): Inherit
from mh-folder-msg-number.
(mh-folder-deleted): Use defface. Inherit from mh-folder-msg-number.
(mh-folder-sent-to-me-hint): New face. Inherit from mh-folder-date.
(mh-folder-sent-to-me-sender): Rename from mh-folder-scan-format. Use
defface. Inherit from mh-folder-followup.
(mh-show-xface): Inherit from mh-show-from and highlight.
(bw-face-generation, bw-toggle-faces)
(bw-new-face-to-old, bw-old-face-to-new): New (tempoarary) variables,
functions for toggling between old and new faces.
* mh-e.el (font-lock-auto-fontify, font-lock-defaults): Hide in
eval-when-compile. We should probably do this throughout.
(mh-scan-good-msg-regexp, mh-scan-deleted-msg-regexp)
(mh-scan-refiled-msg-regexp, mh-scan-cur-msg-number-regexp)
(mh-scan-date-regexp, mh-scan-rcpt-regexp, mh-scan-body-regexp)
(mh-scan-subject-regexp): Sync docstrings with manual
(mh-scan-format-regexp): Rename to mh-scan-sent-to-me-sender-regexp.
Drop date parenthesized expression. Make expression more like the
others (anchored at the beginning of line). Sync docstrings with
manual.
(mh-folder-font-lock-keywords): Use faces directly rather than -face
variables. Use mh-scan-sent-to-me-sender-regexp instead of
mh-scan-format-regexp, and within that expression, use faces
mh-folder-sent-to-me-hint and mh-folder-sent-to-me-sender instead of
mh-folder-date-face and mh-folder-scan-format-face which were
misleading.
* mh-mime.el (mh-mime-security-button-face): Use faces directly rather
than -face variables.
* mh-utils.el (mh-show-font-lock-keywords): Use faces directly rather
than -face variables.
(mh-face-foreground-compat, mh-face-background-compat): New macros.
(mh-face-display-function): Use mh-face-foreground-compat and
mh-face-background-compat to use inherited attributes of mh-show-xface
on Emacs 22 while still working on Emacs 21.
author | Bill Wohler <wohler@newt.com> |
---|---|
date | Sun, 01 Jan 2006 18:51:18 +0000 |
parents | f6384702a1b6 |
children | 65f7f7adff78 e4694597cbf4 |
line wrap: on
line source
#!/bin/sh # quick-install-emacs -- do a halfway-decent job of installing emacs quickly # Written by Miles Bader <miles@gnu.org> # This script is mainly intended for emacs maintainer or pretesters who # install emacs very often. See the --help output for more details. PUBLIC_LIBSRC_BINARIES='b2m emacsclient etags ctags ebrowse' PUBLIC_LIBSRC_SCRIPTS='grep-changelog rcs-checkin' AVOID="CVS -DIC README COPYING ChangeLog ~ [.]orig$ [.]rej$ Makefile makefile stamp-subdir [.]cvsignore [.]arch-ids [{]arch[}] [.][cho]$ make-docfile testfile test-distrib" # Prune old binaries lying around in the source tree PRUNE=no # Re-install files even if they already exist FORCE=no # Command verbose flag VERBOSE='' me="`basename $0`" # Install commands (if the user specifies the `--verbose' option, it is # passed to these commands, so that feature only works if these commands # implement it too) LINK='cp -lf' COPY='cp -f' REMOVE='rm -r' MKDIR='mkdir -p' # Used to execute commands once once we create them EXEC='sh' NAWK=/usr/bin/nawk # avoid non-standard command output from non-C locales unset LANG LC_ALL LC_MESSAGES # Some messages USAGE="Usage: $me [OPTION...] BUILD_TREE [PREFIX]" TRY="Try "\`"$me --help' for more information." # Parse command-line options while :; do case "$1" in -n|--dry-run) EXEC=cat; shift;; -p|--prune) PRUNE=yes; shift;; -P|--no-prune) PRUNE=no; shift;; --prune-only) PRUNE=only; shift;; -f|--force) FORCE=yes; shift;; -v|--verbose) VERBOSE="-v"; shift;; --help) cat <<EOF $USAGE Install emacs quickly -n, --dry-run print installation commands instead of executing them -f, --force install even files that haven't changed -v, --verbose print messages describing what is done -p, --prune prune old generated files -P, --no-prune don't prune old generated files (default) --prune-only prune old generated files, but don't install --help display this help and exit --version output version information and exit $me install emacs \`incrementally,' that is, it will install only those files that have changed since the last time it was invoked, and remove any obsolete files from the installation directories. It also uses hard-links into the source and build trees to do the install, so it uses much less space than the default Makefile install target; however, this also means that $me can not install onto a disk partition other than the one on which the source and build directories reside. Optionally, $me can also remove old versions of automatically generated files that are version-specific (such as the versioned emacs executables in the \`src' directory, and the DOC-* files in the \`etc' directory). The latter action is called \`pruning,' and can be enabled using the \`-p' or \`--prune' options. EOF exit 0 ;; --version) cat <<EOF $me 1.6 Written by Miles Bader <miles@gnu.org> EOF exit 0 ;; -[^-]?*) # split concatenated single-letter options apart FIRST="$1"; shift set -- `echo $FIRST | sed 's/-\(.\)\(.*\)/-\1 -\2/'` "$@" ;; -*) echo 1>&2 "$me: unrecognized option "\`"$1'" echo 1>&2 "$TRY" exit 1 ;; *) break; esac done LINK_CMD="$LINK $VERBOSE" REMOVE_CMD="$REMOVE $VERBOSE" case $# in 1) BUILD="$1";; 2) BUILD="$1"; prefix="$2";; *) echo 1>&2 "$USAGE" echo 1>&2 "$TRY" exit 1 ;; esac if test ! -d "$BUILD"; then echo 1>&2 "$me: $BUILD: Build tree not found" exit 2 elif test ! -r "$BUILD/config.status"; then echo 1>&2 "$me: $BUILD: Not a proper build tree, config.status not found" exit 2 fi CONFIG_STATUS="$BUILD/config.status" get_config_var () { if ! sed -n "s/^s\(.\)@$1@\1\(.*\)\1.*$/\2/p" $CONFIG_STATUS | sed q | grep '' then echo 1>&2 "$me: $1: Configuration variable not found in $CONFIG_STATUS" exit 4 fi } test x"$SRC" = x && { SRC="`get_config_var srcdir`" || exit 4 ; } test x"$prefix" = x && { prefix="`get_config_var prefix`" || exit 4 ; } test x"$ARCH" = x && { ARCH="`get_config_var host`" || exit 4 ; } VERSION=`grep 'defconst[ ]*emacs-version' $SRC/lisp/version.el \ | sed -e 's/^[^"]*"\([^"]*\)".*$/\1/'` DST_SHARE="$prefix/share/emacs/$VERSION" DST_BIN="$prefix/bin" DST_LIBEXEC="$prefix/libexec/emacs/$VERSION/$ARCH" DST_INFO="$prefix/info" maybe_mkdir () { if ! test -d "$1"; then $MKDIR $VERBOSE "$1" 2>&1 | sed "s/^mkdir:/$me:/" 1>&2 fi } maybe_mkdir "$DST_BIN" maybe_mkdir "$DST_SHARE" maybe_mkdir "$DST_SHARE/site-lisp" maybe_mkdir "$DST_LIBEXEC" maybe_mkdir "$DST_INFO" ( # start of command-generating sub-shell PRUNED="" if test x"$PRUNE" != xno; then for D in `ls -1t $BUILD/etc/DOC-* | sed 1d`; do echo $REMOVE_CMD $D PRUNED="$PRUNED $D" done for D in `ls -1t $BUILD/src/emacs-$VERSION.* | sed 1d`; do echo $REMOVE_CMD $D PRUNED="$PRUNED $D" done fi test x"$PRUNE" = xonly && exit 0 maybe_emit_copy () { if test "$FORCE" = yes || ! cmp -s $1 $2; then echo $LINK_CMD $1 $2 fi } maybe_emit_copy $BUILD/src/emacs $DST_BIN/emacs maybe_emit_copy $BUILD/src/emacs $DST_BIN/emacs-$VERSION for F in $PUBLIC_LIBSRC_BINARIES; do maybe_emit_copy $BUILD/lib-src/$F $DST_BIN/$F done for F in $PUBLIC_LIBSRC_SCRIPTS; do maybe_emit_copy $SRC/lib-src/$F $DST_BIN/$F done if test x"$SRC" = x"$BUILD"; then PFXS="$BUILD" else PFXS="$SRC $BUILD" fi for SUBDIR in lisp leim etc lib-src info; do # defaults SHARED=no FORCED='' AVOID_PAT="`echo "($AVOID)" | tr ' ' '|'`" # Set subdir-specific values case $SUBDIR in lisp|leim) DST="$DST_SHARE/$SUBDIR" ;; etc) DST="$DST_SHARE/$SUBDIR" # COPYING is in the avoid list, but there should be a copy of it in # the install etc dir, so make that here. FORCED="$DST/COPYING" ;; lib-src) DST="$DST_LIBEXEC" AVOID_PAT="`echo "($AVOID ($PUBLIC_LIBSRC_BINARIES $PUBLIC_LIBSRC_SCRIPTS)\$)" | tr ' ' '|'`" ;; info) DST="$DST_INFO" SHARED=yes ;; esac for PFX in $PFXS; do if [ -d $PFX/$SUBDIR ]; then for DIR in `(cd $PFX/$SUBDIR; find . -type d -print | sed 's@^./@@')`; do if [ -d $DST/$DIR ]; then echo Directory $DST/$DIR exists else echo Directory $DST/$DIR non-existant if [ "`echo $DIR | egrep -v "$AVOID_PAT"`" ]; then maybe_mkdir $DST/$DIR fi fi done diff -sqr $PFX/$SUBDIR $DST fi done | $NAWK ' BEGIN { src_pat = "^'"$SRC"'/'"$SUBDIR"'/" build_pat = "^'"$BUILD"'/'"$SUBDIR"'/" dst_pat = "^'"$DST"'/" dst_pfx = "'"$DST"'/" avoid_pat = "'"$AVOID_PAT"'" force = ("'"$FORCE"'" == "yes") shared = ("'"$SHARED"'" == "yes") init_bool_array(pruned, "'"$PRUNED"'") init_bool_array(forced, "'"$FORCED"'") } function init_bool_array(array, string, a,k) { split (string, a) for (k in a) array[a[k]] = 1 } function install(src, dst) { if (! (src in pruned)) { cp[src] = dst; from[dst] = src; delete rm[dst]; } } function update(src, dst, copy) { if (src in pruned) { rm[dst] = 1; delete from[dst] } else { if (copy) cp[src] = dst; from[dst] = src; delete rm[dst]; } } function uninstall(dst) { if (!(dst in from)) rm[dst] = 1; } /^Directory / { if ($2 ~ avoid_pat) { if ($NF == "exists") uninstall($2) } else update(0, $2, 0) next } /^Files / { if ($4 ~ avoid_pat && !($4 in forced)) uninstall($4) else if ($NF == "identical") update($2, $4, force) else update($2, $4, 1) next } /^Only / { pfx = $3 sub (/:$/, "/", pfx) if (pfx ~ dst_pat) { if (! shared) uninstall(pfx $4) } else { subdir = pfx if (subdir ~ src_pat) sub (src_pat, "", subdir) else sub (build_pat, "", subdir) dst = dst_pfx subdir $4 if (! (dst ~ avoid_pat)) install(pfx $4, dst) } next } END { for (f in rm) print "'"$REMOVE_CMD"' " f for (f in cp) print "'"$LINK_CMD"' " f " " cp[f] } ' done ) | eval $EXEC # arch-tag: 9322b572-9755-4cf7-a67a-21e6505f1477