Mercurial > emacs
view etc/TERMS @ 51195:3cbf29813eea
(struct frame): Rename members height to text_lines,
width to text_cols, window_height to total_lines, window_width to
total_cols, new_height to new_text_lines, new_width to
new_text_cols. All uses changed.
(struct frame): New members which consolidate common members of
x_output, w32_output, and mac_output structures: left_pos,
top_pos, pixel_height, pixel_width, x_pixels_diff, y_pixels_diff,
win_gravity, size_hint_flags, border_width, internal_border_width,
line_height, fringe_cols, left_fringe_width, right_fringe_width,
want_fullscreen. All uses changed.
(struct frame): New member column_width contaning the canonical
column width, analogue to line_height. All uses changed.
(struct frame): Rename members scroll_bar_pixel_width to
config_scroll_bar_width, and scroll_bar_cols to
config_scroll_bar_cols. All uses changed.
(struct frame): New member scroll_bar_actual_width which
consolidates and renames the vertical_scroll_bar_extra member of
x_output, w32_output, and mac_output structures. All uses changed.
(FRAME_PIXEL_HEIGHT): Renamed from PIXEL_HEIGHT and moved
from x/w32/macterm.h files. All uses changed. Also change code
which referred to f->output_data...->pixel_height.
(FRAME_PIXEL_WIDTH): Renamed from PIXEL_WIDTH and moved
from x/w32/macterm.h files. All uses changed. Also change code
which referred to f->output_data...->pixel_width.
(FRAME_LINES): Renamed from FRAME_HEIGHT. All uses changed.
Also change code which referred to f->height.
(FRAME_COLS): Renamed from FRAME_WIDTH. All uses changed.
Also change code which referred to f->width.
(FRAME_NEW_HEIGHT, FRAME_NEW_WIDTH): Remove macros; change uses
to update new_text_lines and new_text_cols members directly.
(FRAME_CONFIG_SCROLL_BAR_WIDTH): Renamed from
FRAME_SCROLL_BAR_PIXEL_WIDTH. All uses changed.
(FRAME_CONFIG_SCROLL_BAR_COLS): Renamed from
FRAME_SCROLL_BAR_COLS. All uses changed.
(FRAME_LEFT_SCROLL_BAR_COLS, FRAME_RIGHT_SCROLL_BAR_COLS):
Renamed from FRAME_LEFT_SCROLL_BAR_WIDTH and
FRAME_RIGHT_SCROLL_BAR_WIDTH, resp. All uses changed.
(FRAME_SCROLL_BAR_AREA_WIDTH, FRAME_LEFT_SCROLL_BAR_AREA_WIDTH)
(FRAME_RIGHT_SCROLL_BAR_AREA_WIDTH): New macros.
(FRAME_TOTAL_COLS): Renamed from FRAME_WINDOW_WIDTH.
(SET_FRAME_COLS): Renamed from SET_FRAME_WIDTH.
(FRAME_TOTAL_COLS_ARG): Renamed from FRAME_WINDOW_WIDTH_ARG.
(WINDOW_VERTICAL_SCROLL_BAR_COLUMN): Remove unused macro.
(WINDOW_VERTICAL_SCROLL_BAR_HEIGHT): Remove unused macro.
(FRAME_LINE_HEIGHT): Renamed from CANON_Y_UNIT. Unconditionally
return line_height member (it now has proper value also for
non-window frames).
(FRAME_COLUMN_WIDTH): Renamed from CANON_X_UNIT. Unconditionally
return new column_width member (rather than the default font width).
(FRAME_FRINGE_COLS, FRAME_LEFT_FRINGE_WIDTH)
(FRAME_RIGHT_FRINGE_WIDTH): Renamed from FRAME_X_... and moved
from x/w32/macterm.h files. Unconditionally return corresponding
member of frame structure (they now have proper values also for
non-window frames).
(FRAME_TOTAL_FRINGE_WIDTH): Renamed from FRAME_FRINGE_WIDTH.
Calculate return value from left and right widths.
(FRAME_INTERNAL_BORDER_WIDTH): Unconditionally return
internal_border_width member (has proper value for non-window frame).
(FRAME_PIXEL_X_FROM_CANON_X): Renamed from PIXEL_X_FROM_CANON_X.
(FRAME_PIXEL_Y_FROM_CANON_Y): Renamed from PIXEL_Y_FROM_CANON_Y.
(FRAME_CANON_X_FROM_PIXEL_X): Renamed from CANON_X_FROM_PIXEL_X.
(FRAME_CANON_Y_FROM_PIXEL_Y): Renamed from CANON_Y_FROM_PIXEL_Y.
(FRAME_LINE_TO_PIXEL_Y): Renamed from CHAR_TO_PIXEL_ROW,
consolidated from xterm.h, macterm.h, and w32term.h.
(FRAME_COL_TO_PIXEL_X): Renamed from CHAR_TO_PIXEL_COL,
consolidated from xterm.h, macterm.h, and w32term.h.
(FRAME_TEXT_COLS_TO_PIXEL_WIDTH): Renamed from
CHAR_TO_PIXEL_WIDTH consolidated from x/mac/w32term.h.
(FRAME_TEXT_LINES_TO_PIXEL_HEIGHT): Renamed from
CHAR_TO_PIXEL_HEIGHT consolidated from x/mac/w32term.h.
(FRAME_PIXEL_Y_TO_LINE): Renamed from PIXEL_TO_CHAR_ROW
consolidated from x/mac/w32term.h.
(FRAME_PIXEL_X_TO_COL): Renamed from PIXEL_TO_CHAR_COL
consolidated from x/mac/w32term.h.
(FRAME_PIXEL_WIDTH_TO_TEXT_COLS): Renamed from
PIXEL_TO_CHAR_WIDTH consolidated from x/mac/w32term.h.
(FRAME_PIXEL_HEIGHT_TO_TEXT_LINES): Renamed from
PIXEL_TO_CHAR_HEIGHT consolidated from x/mac/w32term.h.
author | Kim F. Storm <storm@cua.dk> |
---|---|
date | Sat, 24 May 2003 21:58:07 +0000 |
parents | 23a1cea22d13 |
children | 3681678d3d86 |
line wrap: on
line source
This file describes what you must or might want to do to termcap entries to make terminals work properly and efficiently with Emacs. Information on likely problems with specific types of terminals appears at the end of the file. *** What you want in a terminal *** Vital 1. Easy to compute suitable padding for. 2. Never ever sends ^S/^Q unless you type them, at least in one mode. Nice for speed 1. Supports insert/delete of multiple lines in one command. 2. Same for multiple characters, though doing them one by one is usually fast enough except on emulators running on machines with bitmap screens. Nice for usability 1. Considerably more than 24 lines. 2. Meta key (shift-like key that controls the 0200 bit in every character you type). *** New termcap strings *** Emacs supports certain termcap strings that are not described in the 4.2 manual but appear to be standard in system V. The one exception is `cS', which I invented. `AL' insert several lines. Takes one parameter, the number of lines to be inserted. You specify how to send this parameter using a %-construct, just like the cursor positions in the `cm' string. `DL' delete several lines. One parameter. `IC' insert several characters. One parameter. `DC' delete several characters. One parameter. `rp' repeat a character. Takes two parameters, the character to be repeated and the number of times to repeat it. Most likely you will use `%.' for sending the character to be repeated. Emacs interprets a padding spec with a * as giving the amount of padding per repetition. WARNING: Many terminals have a command to repeat the *last character output* N times. This means that the character will appear N+1 times in a row when the command argument is N. However, the `rp' string's parameter is the total number of times wanted, not one less. Therefore, such repeat commands may be used in an `rp' string only if you use Emacs's special termcap operator `%a-c\001' to subtract 1 from the repeat count before substituting it into the string. It is probably safe to use this even though the Unix termcap does not accept it because programs other than Emacs probably won't look for `rp' anyway. `cs' set scroll region. Takes two parameters, the vertical positions of the first line to include in the scroll region and the last line to include in the scroll region. Both parameters are origin-zero. The effect of this should be to cause a following insert-line or delete-line not to move lines below the bottom of the scroll region. This is not the same convention that Emacs version 16 used. That is because I was led astray by unclear documentation of the meaning of %i in termcap strings. Since the termcap documentation for `cs' is also unclear, I had to deduce the correct parameter conventions from what would make the VT-100's `cs' string work properly. From an incorrect assumption about %i, I reached an incorrect conclusion about `cs', but the result worked correctly on the VT100 and ANSII terminals. In Emacs version 17, both `cs' and %i work correctly. The version 16 convention was to pass, for the second parameter, the line number of the first line beyond the end of the scroll region. `cS' set scroll region. Differs from `cs' in taking parameters differently. There are four parameters: 1. Total number of lines on the screen. 2. Number of lines above desired scroll region. 3. Number of lines below (outside of) desired scroll region. 4. Total number of lines on the screen, like #1. This is because an Ambassador needs the parameters like this. `cr', `do', `le' Emacs will not attempt to use ^M, ^J or ^H for cursor motion unless these capabilities are present and say to use those characters. `km' Says the terminal has a Meta key. Defining these strings is important for getting maximum performance from your terminal. Make sure that the `ti' string sets all modes needed for editing in Emacs. For example, if your terminal has a mode that controls wrap at the end of the line, you must decide whether to specify the `am' flag in the termcap entry; whichever you decide, the `ti' string should contain commands to set the mode that way. (Emacs also sends the `vs' string after the `ti' string. You can put the mode-setting commands in either one of them.) *** Specific Terminal Types *** Watch out for termcap entries for Ann Arbor Ambassadors that give too little padding for clear-screen. 7.2 msec per line is right. These are the strings whose padding you probably should change: :al=1*\E[L:dl=1*\E[M:cd=7.2*\E[J:cl=7.2*\E[H\E[J: I have sometimes seen `\E[2J' at the front of the `ti' string; this is a clear-screen, very slow, and it can cause you to get Control-s sent by the terminal at startup. I recommend removing the `\E[2J' from the `ti' string. The `ti' or `vs' strings also usually need stuff added to them, such as \E[>33;52;54h\E[>30;37;38;39l You might want to add the following to the `te' or `ve' strings: \E[>52l\E[>37h The following additional capabilities will improve performance: :AL=1*\E[%dL:DL=1*\E[%dM:IC=4\E[%d@:DC=4\E[%dP:rp=1*%.\E[%a-c\001%db: If you find that the Meta key does not work, make sure that :km: is present in the termcap entry. Watch out for termcap entries for VT100's that fail to specify the `sf' string, or that omit the padding needed for the `sf' and `sr' strings (2msec per line affected). What you need is :sf=2*^J:sr=2*\EM:cs=\E[%i%d;%dr: The Concept-100 and Concept-108 have many modes that `ti' strings often fail to initialize. If you have problems on one of these terminals, that is probably the place to fix them. These terminals can support an `rp' string. Watch out on HP terminals for problems with standout disappearing on part of the mode line. These problems are due to the absence of :sg#0: which some HP terminals need. The vi55 is said to require `ip=2'. The Sun console should have these capabilities for good performance. :AL=\E[%dL:DL=\E[%dM:IC=\E[%d@:DC=\E[%dP: The vt220 needs to be set to vt220 mode, 7 bit, space parity in order to work fully with TERM=vt220. If you are using a LAT terminal concentrator, you need to issue these commands to turn off flow control: set port flow control disable define port flow control disable On System V, in the terminfo database, various terminals may have the `xt' flag that should not have it. `xt' should be present only for the Teleray 1061 or equivalent terminal. In particular, System V for the 386 often has `xt' for terminal type AT386 or AT386-M, which is used for the console. You should delete this flag. Here is how: You can get a copy of the terminfo "source" for at386 using the command: `infocmp at386 >at386.tic'. Edit the file at386.tic and remove the `xt' flag. Then compile the new entry with: `tic at386.tic'. It is also reported that these terminal types sometimes have the wrong reverse-scroll string. It should be \E[T, but sometimes is given as \E[S. Here is what watserv1!maytag!focsys!larry recommends for these terminals: # This copy of the terminfo description has been fixed. # The suggestions came from a number of usenet postings. # # Intel AT/386 for color card with monochrome display # AT386-M|at386-m|386AT-M|386at-m|at/386 console, am, bw, eo, xon, cols#80, lines#25, acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%02d;%p2%02dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX,ed=\E[J, el=\E[K, el1=\E[1K\E[X, flash=^G, home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S, indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;38m, kbs=\b, kcbt=^], kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@, knp=\E[U, kpp=\E[V, krmir=\E0, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m, sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;12%;%?%p7%t;9%;m, sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m, # # AT&T 386 color console # AT386|at386|386AT|386at|at/386 console, colors#8, ncv#3, pairs#64, is2=\E[0;10;39m, op=\E[0m, setb=\E[%?%p1%{0}%=%t40m %e%p1%{1}%=%t44m %e%p1%{2}%=%t42m %e%p1%{3}%=%t46m %e%p1%{4}%=%t41m %e%p1%{5}%=%t45m %e%p1%{6}%=%t43m %e%p1%{7}%=%t47m%;, setf=\E[%?%p1%{0}%=%t30m %e%p1%{1}%=%t34m %e%p1%{2}%=%t32m %e%p1%{3}%=%t36m %e%p1%{4}%=%t31m %e%p1%{5}%=%t35m %e%p1%{6}%=%t33m %e%p1%{6}%=%t33m %e%p1%{7}%=%t37m%;, use=at386-m, # # Color console version that supports underline but maps blue # foreground color to cyan. # AT386-UL|at386-ul|386AT-UL|386at-ul|at/386 console, is2=\E[0;10;38m, use=at386,