view msdos/mainmake.v2 @ 30411:41f228350eca

Got rid of all byte-compiler warnings on Emacs Load ada-xref.el before ada-prj.el, so that the Project menu is created when ada-prj tries to add to it. (ada-activate-keys-for-case): Suppress the characters that are not part of the Ada syntax. Better compatibility with else-mode (ada-adjust-case-interactive): When auto-casing is not active, correctly insert newlines (used to insert only ^M). Prevent the syntax table from being changed in case of an error (or '_' becomes part of a word and some commands are confused). Do nothing if ada-auto-case is nil. (ada-after-keyword-p): Ignore keywords that are also attributes (ada-batch-reformat): Update usage comment (ada-call-from-contextual-menu): New function (ada-case-read-exceptions): Reinitialize the casing exception list first to nil first, so that the casing exception file can be shared. (ada-check-defun-name): Handles "configure" keyword for gnatdist files. (ada-compile-goto-error): Fix regexp used to detect a file:line anywhere in the error message (ada-contextual-menu-last-point): New variable (ada-create-keymap): If the variable delete-key-deletes-forward is t on XEmacs, it means that DEL should delete one character forward. (ada-create-menu): Use :included instead of :visible for XEmacs. New submenu "Options". (ada-end-stmt-re): Correctly indent "select ... then abort" statements. (ada-fill-comment-paragraph): Correctly delete all leading '--' even if they don't match ada-fill-comment-prefix Fix handling of paragraphs on the first or last line of a file. (ada-format-paramlist): Fix handling of default parameter values. (ada-get-body-name): New function. (ada-get-current-indent): Optimized by searchling directly for an existing generic part or a statement outside of it. Handle ada-indent-align-comments when indenting comments Replaced some regexps by testing directly the next character. This results in a huge speedup on some files. New indentation scheme for renames statements. Stop looking for the 'while' or 'for' associated with a 'loop' at the first semicolon encountered. A "return" can also match an anonymous access subprogram declaration. (ada-get-indent-noindent): Ignore strings and comments when looking for the keywords "record" and "private". (ada-goto-matching-decl-start): When matching "if", make sure we are not in fact seeing "end if". Ignore "when" statements except when initial keyword was "begin". Fix handling of nested procedures. Add a recursive call to this function to skip over other 'end' statmts. Fix indentation for "when .. => begin" (ada-in-open-paren-p): Fix indentation for complex boolean expressions, where 'and then', 'or else' and parenthesis statements are mixed up. (ada-in-paramlist-p): Skip comments while searching for the beginning Fix handling of operator declarations. (ada-indent-align-comments): New variable (ada-indent-current): Change the syntax table only in the protected section, so that we are sure it is restored correctly. (ada-indent-on-previous-lines): Use ada-use-indent and ada-with-indent Correctly indent "select ... then" (ada-indent-region): Slight speedup. (ada-indent-renames): New variable. (ada-last-which-function-subprog, ada-last-which-function-line): New variables (ada-looking-at-semi-private): Correctly indent the 'private' keyword when it is the first word in a package declaration. (ada-loose-case-word): Stop searching if at the end of the buffer. (ada-loose-case-word, ada-capitalize-word): Recase the whole word even if point is not initially at the end of the word. (ada-matching-decl-start-re): Add "when". (ada-mode): Add support for abbrev-mode, outline-mode and which-func-mode Override the old find-file.el entry in ff-special-constructs since it is using the obsolete ada-spec-suffix variable (ada-no-auto-case): New function (ada-scan-paramlist): When parsing the argument type, accept spaces (as in "X 'Class", generated by Rational Rose). (ada-other-file-name): No longer loads the other file. (ada-popup-menu): Save and restore the current buffer and cursor position before and after displaying the menu. (ada-search-ignore-complex-boolean): New function. (ada-uncomment-region): Emacs21 already knows how to delete comments not starting in the first column. (ada-use-indent): New variable (ada-which-function): New function. (ada-with-indent): New variable (ada-xemacs): evaluate it at compile time too, so that ada-mode.el can be batch-compiled from the command line.

# Top-level Makefile for Emacs under MS-DOS/DJGPP v2.0 or higher. -*-makefile-*-
#
# make all	to compile and build Emacs.
# make install	to install it.
# make TAGS	to update tags tables.
#
# make clean  or  make mostlyclean
#      Delete all files from the current directory that are normally
#      created by building the program.	 Don't delete the files that
#      record the configuration.  Also preserve files that could be made
#      by building, but normally aren't because the distribution comes
#      with them.
#
#      Delete `.dvi' files here if they are not part of the distribution.
# 
# make distclean
#      Delete all files from the current directory that are created by
#      configuring or building the program.  If you have unpacked the
#      source and built the program without creating any other files,
#      `make distclean' should leave only the files that were in the
#      distribution.
# 
# make realclean
#      Delete everything from the current directory that can be
#      reconstructed with this Makefile.  This typically includes
#      everything deleted by distclean, plus more: C source files
#      produced by Bison, tags tables, info files, and so on.
#
# make extraclean
#      Still more severe - delete backup and autosave files, too.

# This gork is required for those who use a Unix-style shell, and
# have SHELL in the environment pointing to it.  Here we force
# Make to use COMMAND.COM instead.  This Makefile won't work otherwise.
# (The /xyzzy directory is used to minimize the chance that someone
# actually has such a directory with an incompatible command.com.  We
# used to have /dos there, but some Windows installations have an old
# version of DOS stashed in that directory, and command.com from there
# won't run on Windows, complaining about "Incorrect DOS version".
# Make will look up PATH for the shell executable, so the directory name
# is not important.)
SHELL=/xyzzy/command
MAKESHELL=/xyzzy/command

# Generate a full pathname of the top-level installation directory
top_srcdir := $(subst \,/,$(shell cd))

# Find out which version of Emacs this is.
version := ${shell sed -n -e '/(defconst emacs-version/s/^[^"]*\("[^"]*"\).*/\1/p' lisp/version.el}

all:	lib-src src man

lib-src: FRC
	cd lib-src
	$(MAKE) top_srcdir=${top_srcdir} version=${version}
	cd ..

src: FRC
	cd src
	$(MAKE) top_srcdir=${top_srcdir}
	redir -o gdb.sed echo '/-geometry/s,^.*,set environment HOME $(top_srcdir),'
	redir -oa gdb.sed echo '/environment *TERM/s/^.*/set environment TERM internal/'
	redir -oa gdb.sed echo '/x_error_quitter/s/^.*/set environment NAME root/'
	redir -o gdb.tmp sed -f gdb.sed _gdbinit
	redir -oa gdb.tmp echo 'set environment USER root'
	redir -oa gdb.tmp echo 'set environment EMACSPATH $(top_srcdir)/bin'
	redir -oa gdb.tmp echo 'set environment SHELL $(subst \,/,$(COMSPEC))'
	redir -oa gdb.tmp echo 'set environment PATH $(subst \,/,$(PATH))'
	update gdb.tmp gdb.ini
	rm -f gdb.tmp gdb.sed
	cd ..
	if exist leim\Makefile redir $(MAKE) -C leim top_srcdir=${top_srcdir}

man:	FRC
	cd man
	$(MAKE) top_srcdir=${top_srcdir}
	cd ..

install: all
	if not exist bin\nul md bin
	cd lib-src
	if exist hexl.exe mv -f hexl.exe ../bin
	if exist etags.exe mv -f etags.exe ../bin
	if exist ctags.exe mv -f ctags.exe ../bin
	if exist b2m.exe mv -f b2m.exe ../bin
	if exist ebrowse.exe mv -f ebrowse.exe ../bin
	if exist fns.el update fns.el ../bin/fns.el
	cd ..
	cd src
	stubify emacs
	stubedit emacs.exe minstack=512k
	mv -f emacs.exe ../bin/
	cd ..

FRC:

TAGS tags:	lib-src FRC
	cd lib-src
	if exist etags.exe mv -f etags.exe ../bin
	cd ..
	cd lisp
	../bin/etags [a-zA-Z]*.el [a-zA-Z]*/[a-zA-Z]*.el
	cd ..
	cd src
	../bin/etags --include=../lisp/TAGS \
	'--regex=/[ 	]*DEFVAR_[A-Z_ 	(]+"\([^"]+\)"/' *.c *.h s/msdos.h m/intel386.h
	cd ..
	./bin/etags --include=src/TAGS

check:
	@echo "We don't have any tests for GNU Emacs yet."

clean:
	cd lib-src
	$(MAKE) clean
	cd ..
	cd src
	$(MAKE) clean
	cd ..
	cd oldxmenu
	-$(MAKE) clean
	cd ..
	cd leim
	if exist Makefile redir $(MAKE) clean
	cd ..