Mercurial > emacs
view src/print.c @ 111402:435e622dd41e
Refer to set-coding-system-priority instead of the obsolete
set-coding-priority in the doc string.
| author | Lars Magne Ingebrigtsen <larsi@gnus.org> |
|---|---|
| date | Thu, 04 Nov 2010 23:37:06 +0100 |
| parents | b8fde5ef9e14 |
| children | 7153f8068e69 |
line wrap: on
line source
/* Lisp object printing and output streams. Copyright (C) 1985, 1986, 1988, 1993, 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc. This file is part of GNU Emacs. GNU Emacs is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. GNU Emacs is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>. */ #include <config.h> #include <stdio.h> #include <setjmp.h> #include "lisp.h" #include "buffer.h" #include "character.h" #include "charset.h" #include "keyboard.h" #include "frame.h" #include "window.h" #include "process.h" #include "dispextern.h" #include "termchar.h" #include "intervals.h" #include "blockinput.h" #include "termhooks.h" /* For struct terminal. */ #include "font.h" Lisp_Object Vstandard_output, Qstandard_output; Lisp_Object Qtemp_buffer_setup_hook; /* These are used to print like we read. */ Lisp_Object Vfloat_output_format, Qfloat_output_format; #include <math.h> #if STDC_HEADERS #include <float.h> #endif /* Default to values appropriate for IEEE floating point. */ #ifndef FLT_RADIX #define FLT_RADIX 2 #endif #ifndef DBL_MANT_DIG #define DBL_MANT_DIG 53 #endif #ifndef DBL_DIG #define DBL_DIG 15 #endif #ifndef DBL_MIN #define DBL_MIN 2.2250738585072014e-308 #endif #ifdef DBL_MIN_REPLACEMENT #undef DBL_MIN #define DBL_MIN DBL_MIN_REPLACEMENT #endif /* Define DOUBLE_DIGITS_BOUND, an upper bound on the number of decimal digits needed to express a float without losing information. The general-case formula is valid for the usual case, IEEE floating point, but many compilers can't optimize the formula to an integer constant, so make a special case for it. */ #if FLT_RADIX == 2 && DBL_MANT_DIG == 53 #define DOUBLE_DIGITS_BOUND 17 /* IEEE floating point */ #else #define DOUBLE_DIGITS_BOUND ((int) ceil (log10 (pow (FLT_RADIX, DBL_MANT_DIG)))) #endif /* Avoid actual stack overflow in print. */ int print_depth; /* Level of nesting inside outputting backquote in new style. */ int new_backquote_output; /* Detect most circularities to print finite output. */ #define PRINT_CIRCLE 200 Lisp_Object being_printed[PRINT_CIRCLE]; /* When printing into a buffer, first we put the text in this block, then insert it all at once. */ char *print_buffer; /* Size allocated in print_buffer. */ EMACS_INT print_buffer_size; /* Chars stored in print_buffer. */ EMACS_INT print_buffer_pos; /* Bytes stored in print_buffer. */ EMACS_INT print_buffer_pos_byte; /* Maximum length of list to print in full; noninteger means effectively infinity */ Lisp_Object Vprint_length; /* Maximum depth of list to print in full; noninteger means effectively infinity. */ Lisp_Object Vprint_level; /* Nonzero means print newlines in strings as \n. */ int print_escape_newlines; /* Nonzero means to print single-byte non-ascii characters in strings as octal escapes. */ int print_escape_nonascii; /* Nonzero means to print multibyte characters in strings as hex escapes. */ int print_escape_multibyte; Lisp_Object Qprint_escape_newlines; Lisp_Object Qprint_escape_multibyte, Qprint_escape_nonascii; /* Nonzero means print (quote foo) forms as 'foo, etc. */ int print_quoted; /* Non-nil means print #: before uninterned symbols. */ Lisp_Object Vprint_gensym; /* Non-nil means print recursive structures using #n= and #n# syntax. */ Lisp_Object Vprint_circle; /* Non-nil means keep continuous number for #n= and #n# syntax between several print functions. */ Lisp_Object Vprint_continuous_numbering; /* Vprint_number_table is a vector like [OBJ1 STAT1 OBJ2 STAT2 ...], where OBJn are objects going to be printed, and STATn are their status, which may be different meanings during process. See the comments of the functions print and print_preprocess for details. print_number_index keeps the last position the next object should be added, twice of which is the actual vector position in Vprint_number_table. */ int print_number_index; Lisp_Object Vprint_number_table; /* PRINT_NUMBER_OBJECT returns the I'th object in Vprint_number_table TABLE. PRINT_NUMBER_STATUS returns the status of the I'th object in TABLE. See the comment of the variable Vprint_number_table. */ #define PRINT_NUMBER_OBJECT(table,i) XVECTOR ((table))->contents[(i) * 2] #define PRINT_NUMBER_STATUS(table,i) XVECTOR ((table))->contents[(i) * 2 + 1] void print_interval (INTERVAL interval, Lisp_Object printcharfun); /* GDB resets this to zero on W32 to disable OutputDebugString calls. */ int print_output_debug_flag = 1; /* Low level output routines for characters and strings */ /* Lisp functions to do output using a stream must have the stream in a variable called printcharfun and must start with PRINTPREPARE, end with PRINTFINISH, and use PRINTDECLARE to declare common variables. Use PRINTCHAR to output one character, or call strout to output a block of characters. */ #define PRINTDECLARE \ struct buffer *old = current_buffer; \ EMACS_INT old_point = -1, start_point = -1; \ EMACS_INT old_point_byte = -1, start_point_byte = -1; \ int specpdl_count = SPECPDL_INDEX (); \ int free_print_buffer = 0; \ int multibyte = !NILP (current_buffer->enable_multibyte_characters); \ Lisp_Object original #define PRINTPREPARE \ original = printcharfun; \ if (NILP (printcharfun)) printcharfun = Qt; \ if (BUFFERP (printcharfun)) \ { \ if (XBUFFER (printcharfun) != current_buffer) \ Fset_buffer (printcharfun); \ printcharfun = Qnil; \ } \ if (MARKERP (printcharfun)) \ { \ EMACS_INT marker_pos; \ if (! XMARKER (printcharfun)->buffer) \ error ("Marker does not point anywhere"); \ if (XMARKER (printcharfun)->buffer != current_buffer) \ set_buffer_internal (XMARKER (printcharfun)->buffer); \ marker_pos = marker_position (printcharfun); \ if (marker_pos < BEGV || marker_pos > ZV) \ error ("Marker is outside the accessible part of the buffer"); \ old_point = PT; \ old_point_byte = PT_BYTE; \ SET_PT_BOTH (marker_pos, \ marker_byte_position (printcharfun)); \ start_point = PT; \ start_point_byte = PT_BYTE; \ printcharfun = Qnil; \ } \ if (NILP (printcharfun)) \ { \ Lisp_Object string; \ if (NILP (current_buffer->enable_multibyte_characters) \ && ! print_escape_multibyte) \ specbind (Qprint_escape_multibyte, Qt); \ if (! NILP (current_buffer->enable_multibyte_characters) \ && ! print_escape_nonascii) \ specbind (Qprint_escape_nonascii, Qt); \ if (print_buffer != 0) \ { \ string = make_string_from_bytes (print_buffer, \ print_buffer_pos, \ print_buffer_pos_byte); \ record_unwind_protect (print_unwind, string); \ } \ else \ { \ print_buffer_size = 1000; \ print_buffer = (char *) xmalloc (print_buffer_size); \ free_print_buffer = 1; \ } \ print_buffer_pos = 0; \ print_buffer_pos_byte = 0; \ } \ if (EQ (printcharfun, Qt) && ! noninteractive) \ setup_echo_area_for_printing (multibyte); #define PRINTFINISH \ if (NILP (printcharfun)) \ { \ if (print_buffer_pos != print_buffer_pos_byte \ && NILP (current_buffer->enable_multibyte_characters)) \ { \ unsigned char *temp \ = (unsigned char *) alloca (print_buffer_pos + 1); \ copy_text (print_buffer, temp, print_buffer_pos_byte, \ 1, 0); \ insert_1_both (temp, print_buffer_pos, \ print_buffer_pos, 0, 1, 0); \ } \ else \ insert_1_both (print_buffer, print_buffer_pos, \ print_buffer_pos_byte, 0, 1, 0); \ signal_after_change (PT - print_buffer_pos, 0, print_buffer_pos);\ } \ if (free_print_buffer) \ { \ xfree (print_buffer); \ print_buffer = 0; \ } \ unbind_to (specpdl_count, Qnil); \ if (MARKERP (original)) \ set_marker_both (original, Qnil, PT, PT_BYTE); \ if (old_point >= 0) \ SET_PT_BOTH (old_point + (old_point >= start_point \ ? PT - start_point : 0), \ old_point_byte + (old_point_byte >= start_point_byte \ ? PT_BYTE - start_point_byte : 0)); \ if (old != current_buffer) \ set_buffer_internal (old); #define PRINTCHAR(ch) printchar (ch, printcharfun) /* This is used to restore the saved contents of print_buffer when there is a recursive call to print. */ static Lisp_Object print_unwind (Lisp_Object saved_text) { memcpy (print_buffer, SDATA (saved_text), SCHARS (saved_text)); return Qnil; } /* Print character CH using method FUN. FUN nil means print to print_buffer. FUN t means print to echo area or stdout if non-interactive. If FUN is neither nil nor t, call FUN with CH as argument. */ static void printchar (unsigned int ch, Lisp_Object fun) { if (!NILP (fun) && !EQ (fun, Qt)) call1 (fun, make_number (ch)); else { unsigned char str[MAX_MULTIBYTE_LENGTH]; int len = CHAR_STRING (ch, str); QUIT; if (NILP (fun)) { if (print_buffer_pos_byte + len >= print_buffer_size) print_buffer = (char *) xrealloc (print_buffer, print_buffer_size *= 2); memcpy (print_buffer + print_buffer_pos_byte, str, len); print_buffer_pos += 1; print_buffer_pos_byte += len; } else if (noninteractive) { fwrite (str, 1, len, stdout); noninteractive_need_newline = 1; } else { int multibyte_p = !NILP (current_buffer->enable_multibyte_characters); setup_echo_area_for_printing (multibyte_p); insert_char (ch); message_dolog (str, len, 0, multibyte_p); } } } /* Output SIZE characters, SIZE_BYTE bytes from string PTR using method PRINTCHARFUN. If SIZE < 0, use the string length of PTR for both SIZE and SIZE_BYTE. PRINTCHARFUN nil means output to print_buffer. PRINTCHARFUN t means output to the echo area or to stdout if non-interactive. If neither nil nor t, call Lisp function PRINTCHARFUN for each character printed. MULTIBYTE non-zero means PTR contains multibyte characters. In the case where PRINTCHARFUN is nil, it is safe for PTR to point to data in a Lisp string. Otherwise that is not safe. */ static void strout (const char *ptr, EMACS_INT size, EMACS_INT size_byte, Lisp_Object printcharfun, int multibyte) { if (size < 0) size_byte = size = strlen (ptr); if (NILP (printcharfun)) { if (print_buffer_pos_byte + size_byte > print_buffer_size) { print_buffer_size = print_buffer_size * 2 + size_byte; print_buffer = (char *) xrealloc (print_buffer, print_buffer_size); } memcpy (print_buffer + print_buffer_pos_byte, ptr, size_byte); print_buffer_pos += size; print_buffer_pos_byte += size_byte; } else if (noninteractive && EQ (printcharfun, Qt)) { fwrite (ptr, 1, size_byte, stdout); noninteractive_need_newline = 1; } else if (EQ (printcharfun, Qt)) { /* Output to echo area. We're trying to avoid a little overhead here, that's the reason we don't call printchar to do the job. */ int i; int multibyte_p = !NILP (current_buffer->enable_multibyte_characters); setup_echo_area_for_printing (multibyte_p); message_dolog (ptr, size_byte, 0, multibyte_p); if (size == size_byte) { for (i = 0; i < size; ++i) insert_char ((unsigned char) *ptr++); } else { int len; for (i = 0; i < size_byte; i += len) { int ch = STRING_CHAR_AND_LENGTH (ptr + i, len); insert_char (ch); } } } else { /* PRINTCHARFUN is a Lisp function. */ EMACS_INT i = 0; if (size == size_byte) { while (i < size_byte) { int ch = ptr[i++]; PRINTCHAR (ch); } } else { while (i < size_byte) { /* Here, we must convert each multi-byte form to the corresponding character code before handing it to PRINTCHAR. */ int len; int ch = STRING_CHAR_AND_LENGTH (ptr + i, len); PRINTCHAR (ch); i += len; } } } } /* Print the contents of a string STRING using PRINTCHARFUN. It isn't safe to use strout in many cases, because printing one char can relocate. */ static void print_string (Lisp_Object string, Lisp_Object printcharfun) { if (EQ (printcharfun, Qt) || NILP (printcharfun)) { EMACS_INT chars; if (print_escape_nonascii) string = string_escape_byte8 (string); if (STRING_MULTIBYTE (string)) chars = SCHARS (string); else if (! print_escape_nonascii && (EQ (printcharfun, Qt) ? ! NILP (buffer_defaults.enable_multibyte_characters) : ! NILP (current_buffer->enable_multibyte_characters))) { /* If unibyte string STRING contains 8-bit codes, we must convert STRING to a multibyte string containing the same character codes. */ Lisp_Object newstr; EMACS_INT bytes; chars = SBYTES (string); bytes = parse_str_to_multibyte (SDATA (string), chars); if (chars < bytes) { newstr = make_uninit_multibyte_string (chars, bytes); memcpy (SDATA (newstr), SDATA (string), chars); str_to_multibyte (SDATA (newstr), bytes, chars); string = newstr; } } else chars = SBYTES (string); if (EQ (printcharfun, Qt)) { /* Output to echo area. */ EMACS_INT nbytes = SBYTES (string); char *buffer; /* Copy the string contents so that relocation of STRING by GC does not cause trouble. */ USE_SAFE_ALLOCA; SAFE_ALLOCA (buffer, char *, nbytes); memcpy (buffer, SDATA (string), nbytes); strout (buffer, chars, SBYTES (string), printcharfun, STRING_MULTIBYTE (string)); SAFE_FREE (); } else /* No need to copy, since output to print_buffer can't GC. */ strout (SDATA (string), chars, SBYTES (string), printcharfun, STRING_MULTIBYTE (string)); } else { /* Otherwise, string may be relocated by printing one char. So re-fetch the string address for each character. */ EMACS_INT i; EMACS_INT size = SCHARS (string); EMACS_INT size_byte = SBYTES (string); struct gcpro gcpro1; GCPRO1 (string); if (size == size_byte) for (i = 0; i < size; i++) PRINTCHAR (SREF (string, i)); else for (i = 0; i < size_byte; ) { /* Here, we must convert each multi-byte form to the corresponding character code before handing it to PRINTCHAR. */ int len; int ch = STRING_CHAR_AND_LENGTH (SDATA (string) + i, len); PRINTCHAR (ch); i += len; } UNGCPRO; } } DEFUN ("write-char", Fwrite_char, Swrite_char, 1, 2, 0, doc: /* Output character CHARACTER to stream PRINTCHARFUN. PRINTCHARFUN defaults to the value of `standard-output' (which see). */) (Lisp_Object character, Lisp_Object printcharfun) { PRINTDECLARE; if (NILP (printcharfun)) printcharfun = Vstandard_output; CHECK_NUMBER (character); PRINTPREPARE; PRINTCHAR (XINT (character)); PRINTFINISH; return character; } /* Used from outside of print.c to print a block of SIZE single-byte chars at DATA on the default output stream. Do not use this on the contents of a Lisp string. */ void write_string (const char *data, int size) { PRINTDECLARE; Lisp_Object printcharfun; printcharfun = Vstandard_output; PRINTPREPARE; strout (data, size, size, printcharfun, 0); PRINTFINISH; } /* Used from outside of print.c to print a block of SIZE single-byte chars at DATA on a specified stream PRINTCHARFUN. Do not use this on the contents of a Lisp string. */ void write_string_1 (const char *data, int size, Lisp_Object printcharfun) { PRINTDECLARE; PRINTPREPARE; strout (data, size, size, printcharfun, 0); PRINTFINISH; } void temp_output_buffer_setup (const char *bufname) { int count = SPECPDL_INDEX (); register struct buffer *old = current_buffer; register Lisp_Object buf; record_unwind_protect (set_buffer_if_live, Fcurrent_buffer ()); Fset_buffer (Fget_buffer_create (build_string (bufname))); Fkill_all_local_variables (); delete_all_overlays (current_buffer); current_buffer->directory = old->directory; current_buffer->read_only = Qnil; current_buffer->filename = Qnil; current_buffer->undo_list = Qt; eassert (current_buffer->overlays_before == NULL); eassert (current_buffer->overlays_after == NULL); current_buffer->enable_multibyte_characters = buffer_defaults.enable_multibyte_characters; specbind (Qinhibit_read_only, Qt); specbind (Qinhibit_modification_hooks, Qt); Ferase_buffer (); XSETBUFFER (buf, current_buffer); Frun_hooks (1, &Qtemp_buffer_setup_hook); unbind_to (count, Qnil); specbind (Qstandard_output, buf); } Lisp_Object internal_with_output_to_temp_buffer (const char *bufname, Lisp_Object (*function) (Lisp_Object), Lisp_Object args) { int count = SPECPDL_INDEX (); Lisp_Object buf, val; struct gcpro gcpro1; GCPRO1 (args); record_unwind_protect (Fset_buffer, Fcurrent_buffer ()); temp_output_buffer_setup (bufname); buf = Vstandard_output; UNGCPRO; val = (*function) (args); GCPRO1 (val); temp_output_buffer_show (buf); UNGCPRO; return unbind_to (count, val); } DEFUN ("with-output-to-temp-buffer", Fwith_output_to_temp_buffer, Swith_output_to_temp_buffer, 1, UNEVALLED, 0, doc: /* Bind `standard-output' to buffer BUFNAME, eval BODY, then show that buffer. This construct makes buffer BUFNAME empty before running BODY. It does not make the buffer current for BODY. Instead it binds `standard-output' to that buffer, so that output generated with `prin1' and similar functions in BODY goes into the buffer. At the end of BODY, this marks buffer BUFNAME unmodifed and displays it in a window, but does not select it. The normal way to do this is by calling `display-buffer', then running `temp-buffer-show-hook'. However, if `temp-buffer-show-function' is non-nil, it calls that function instead (and does not run `temp-buffer-show-hook'). The function gets one argument, the buffer to display. The return value of `with-output-to-temp-buffer' is the value of the last form in BODY. If BODY does not finish normally, the buffer BUFNAME is not displayed. This runs the hook `temp-buffer-setup-hook' before BODY, with the buffer BUFNAME temporarily current. It runs the hook `temp-buffer-show-hook' after displaying buffer BUFNAME, with that buffer temporarily current, and the window that was used to display it temporarily selected. But it doesn't run `temp-buffer-show-hook' if it uses `temp-buffer-show-function'. usage: (with-output-to-temp-buffer BUFNAME BODY...) */) (Lisp_Object args) { struct gcpro gcpro1; Lisp_Object name; int count = SPECPDL_INDEX (); Lisp_Object buf, val; GCPRO1(args); name = Feval (Fcar (args)); CHECK_STRING (name); temp_output_buffer_setup (SDATA (name)); buf = Vstandard_output; UNGCPRO; val = Fprogn (XCDR (args)); GCPRO1 (val); temp_output_buffer_show (buf); UNGCPRO; return unbind_to (count, val); } static void print (Lisp_Object obj, register Lisp_Object printcharfun, int escapeflag); static void print_preprocess (Lisp_Object obj); static void print_preprocess_string (INTERVAL interval, Lisp_Object arg); static void print_object (Lisp_Object obj, register Lisp_Object printcharfun, int escapeflag); DEFUN ("terpri", Fterpri, Sterpri, 0, 1, 0, doc: /* Output a newline to stream PRINTCHARFUN. If PRINTCHARFUN is omitted or nil, the value of `standard-output' is used. */) (Lisp_Object printcharfun) { PRINTDECLARE; if (NILP (printcharfun)) printcharfun = Vstandard_output; PRINTPREPARE; PRINTCHAR ('\n'); PRINTFINISH; return Qt; } DEFUN ("prin1", Fprin1, Sprin1, 1, 2, 0, doc: /* Output the printed representation of OBJECT, any Lisp object. Quoting characters are printed when needed to make output that `read' can handle, whenever this is possible. For complex objects, the behavior is controlled by `print-level' and `print-length', which see. OBJECT is any of the Lisp data types: a number, a string, a symbol, a list, a buffer, a window, a frame, etc. A printed representation of an object is text which describes that object. Optional argument PRINTCHARFUN is the output stream, which can be one of these: - a buffer, in which case output is inserted into that buffer at point; - a marker, in which case output is inserted at marker's position; - a function, in which case that function is called once for each character of OBJECT's printed representation; - a symbol, in which case that symbol's function definition is called; or - t, in which case the output is displayed in the echo area. If PRINTCHARFUN is omitted, the value of `standard-output' (which see) is used instead. */) (Lisp_Object object, Lisp_Object printcharfun) { PRINTDECLARE; if (NILP (printcharfun)) printcharfun = Vstandard_output; PRINTPREPARE; print (object, printcharfun, 1); PRINTFINISH; return object; } /* a buffer which is used to hold output being built by prin1-to-string */ Lisp_Object Vprin1_to_string_buffer; DEFUN ("prin1-to-string", Fprin1_to_string, Sprin1_to_string, 1, 2, 0, doc: /* Return a string containing the printed representation of OBJECT. OBJECT can be any Lisp object. This function outputs quoting characters when necessary to make output that `read' can handle, whenever possible, unless the optional second argument NOESCAPE is non-nil. For complex objects, the behavior is controlled by `print-level' and `print-length', which see. OBJECT is any of the Lisp data types: a number, a string, a symbol, a list, a buffer, a window, a frame, etc. A printed representation of an object is text which describes that object. */) (Lisp_Object object, Lisp_Object noescape) { Lisp_Object printcharfun; /* struct gcpro gcpro1, gcpro2; */ Lisp_Object save_deactivate_mark; int count = SPECPDL_INDEX (); struct buffer *previous; specbind (Qinhibit_modification_hooks, Qt); { PRINTDECLARE; /* Save and restore this--we are altering a buffer but we don't want to deactivate the mark just for that. No need for specbind, since errors deactivate the mark. */ save_deactivate_mark = Vdeactivate_mark; /* GCPRO2 (object, save_deactivate_mark); */ abort_on_gc++; printcharfun = Vprin1_to_string_buffer; PRINTPREPARE; print (object, printcharfun, NILP (noescape)); /* Make Vprin1_to_string_buffer be the default buffer after PRINTFINSH */ PRINTFINISH; } previous = current_buffer; set_buffer_internal (XBUFFER (Vprin1_to_string_buffer)); object = Fbuffer_string (); if (SBYTES (object) == SCHARS (object)) STRING_SET_UNIBYTE (object); /* Note that this won't make prepare_to_modify_buffer call ask-user-about-supersession-threat because this buffer does not visit a file. */ Ferase_buffer (); set_buffer_internal (previous); Vdeactivate_mark = save_deactivate_mark; /* UNGCPRO; */ abort_on_gc--; return unbind_to (count, object); } DEFUN ("princ", Fprinc, Sprinc, 1, 2, 0, doc: /* Output the printed representation of OBJECT, any Lisp object. No quoting characters are used; no delimiters are printed around the contents of strings. OBJECT is any of the Lisp data types: a number, a string, a symbol, a list, a buffer, a window, a frame, etc. A printed representation of an object is text which describes that object. Optional argument PRINTCHARFUN is the output stream, which can be one of these: - a buffer, in which case output is inserted into that buffer at point; - a marker, in which case output is inserted at marker's position; - a function, in which case that function is called once for each character of OBJECT's printed representation; - a symbol, in which case that symbol's function definition is called; or - t, in which case the output is displayed in the echo area. If PRINTCHARFUN is omitted, the value of `standard-output' (which see) is used instead. */) (Lisp_Object object, Lisp_Object printcharfun) { PRINTDECLARE; if (NILP (printcharfun)) printcharfun = Vstandard_output; PRINTPREPARE; print (object, printcharfun, 0); PRINTFINISH; return object; } DEFUN ("print", Fprint, Sprint, 1, 2, 0, doc: /* Output the printed representation of OBJECT, with newlines around it. Quoting characters are printed when needed to make output that `read' can handle, whenever this is possible. For complex objects, the behavior is controlled by `print-level' and `print-length', which see. OBJECT is any of the Lisp data types: a number, a string, a symbol, a list, a buffer, a window, a frame, etc. A printed representation of an object is text which describes that object. Optional argument PRINTCHARFUN is the output stream, which can be one of these: - a buffer, in which case output is inserted into that buffer at point; - a marker, in which case output is inserted at marker's position; - a function, in which case that function is called once for each character of OBJECT's printed representation; - a symbol, in which case that symbol's function definition is called; or - t, in which case the output is displayed in the echo area. If PRINTCHARFUN is omitted, the value of `standard-output' (which see) is used instead. */) (Lisp_Object object, Lisp_Object printcharfun) { PRINTDECLARE; struct gcpro gcpro1; if (NILP (printcharfun)) printcharfun = Vstandard_output; GCPRO1 (object); PRINTPREPARE; PRINTCHAR ('\n'); print (object, printcharfun, 1); PRINTCHAR ('\n'); PRINTFINISH; UNGCPRO; return object; } /* The subroutine object for external-debugging-output is kept here for the convenience of the debugger. */ Lisp_Object Qexternal_debugging_output; DEFUN ("external-debugging-output", Fexternal_debugging_output, Sexternal_debugging_output, 1, 1, 0, doc: /* Write CHARACTER to stderr. You can call print while debugging emacs, and pass it this function to make it write to the debugging output. */) (Lisp_Object character) { CHECK_NUMBER (character); putc ((int) XINT (character), stderr); #ifdef WINDOWSNT /* Send the output to a debugger (nothing happens if there isn't one). */ if (print_output_debug_flag) { char buf[2] = {(char) XINT (character), '\0'}; OutputDebugString (buf); } #endif return character; } /* This function is never called. Its purpose is to prevent print_output_debug_flag from being optimized away. */ void debug_output_compilation_hack (int x) { print_output_debug_flag = x; } #if defined (GNU_LINUX) /* This functionality is not vitally important in general, so we rely on non-portable ability to use stderr as lvalue. */ #define WITH_REDIRECT_DEBUGGING_OUTPUT 1 FILE *initial_stderr_stream = NULL; DEFUN ("redirect-debugging-output", Fredirect_debugging_output, Sredirect_debugging_output, 1, 2, "FDebug output file: \nP", doc: /* Redirect debugging output (stderr stream) to file FILE. If FILE is nil, reset target to the initial stderr stream. Optional arg APPEND non-nil (interactively, with prefix arg) means append to existing target file. */) (Lisp_Object file, Lisp_Object append) { if (initial_stderr_stream != NULL) { BLOCK_INPUT; fclose (stderr); UNBLOCK_INPUT; } stderr = initial_stderr_stream; initial_stderr_stream = NULL; if (STRINGP (file)) { file = Fexpand_file_name (file, Qnil); initial_stderr_stream = stderr; stderr = fopen (SDATA (file), NILP (append) ? "w" : "a"); if (stderr == NULL) { stderr = initial_stderr_stream; initial_stderr_stream = NULL; report_file_error ("Cannot open debugging output stream", Fcons (file, Qnil)); } } return Qnil; } #endif /* GNU_LINUX */ /* This is the interface for debugging printing. */ void debug_print (Lisp_Object arg) { Fprin1 (arg, Qexternal_debugging_output); fprintf (stderr, "\r\n"); } void safe_debug_print (Lisp_Object arg) { int valid = valid_lisp_object_p (arg); if (valid > 0) debug_print (arg); else fprintf (stderr, "#<%s_LISP_OBJECT 0x%08lx>\r\n", !valid ? "INVALID" : "SOME", (unsigned long) XHASH (arg) ); } DEFUN ("error-message-string", Ferror_message_string, Serror_message_string, 1, 1, 0, doc: /* Convert an error value (ERROR-SYMBOL . DATA) to an error message. See Info anchor `(elisp)Definition of signal' for some details on how this error message is constructed. */) (Lisp_Object obj) { struct buffer *old = current_buffer; Lisp_Object value; struct gcpro gcpro1; /* If OBJ is (error STRING), just return STRING. That is not only faster, it also avoids the need to allocate space here when the error is due to memory full. */ if (CONSP (obj) && EQ (XCAR (obj), Qerror) && CONSP (XCDR (obj)) && STRINGP (XCAR (XCDR (obj))) && NILP (XCDR (XCDR (obj)))) return XCAR (XCDR (obj)); print_error_message (obj, Vprin1_to_string_buffer, 0, Qnil); set_buffer_internal (XBUFFER (Vprin1_to_string_buffer)); value = Fbuffer_string (); GCPRO1 (value); Ferase_buffer (); set_buffer_internal (old); UNGCPRO; return value; } /* Print an error message for the error DATA onto Lisp output stream STREAM (suitable for the print functions). CONTEXT is a C string describing the context of the error. CALLER is the Lisp function inside which the error was signaled. */ void print_error_message (Lisp_Object data, Lisp_Object stream, const char *context, Lisp_Object caller) { Lisp_Object errname, errmsg, file_error, tail; struct gcpro gcpro1; int i; if (context != 0) write_string_1 (context, -1, stream); /* If we know from where the error was signaled, show it in *Messages*. */ if (!NILP (caller) && SYMBOLP (caller)) { Lisp_Object cname = SYMBOL_NAME (caller); char *name = alloca (SBYTES (cname)); memcpy (name, SDATA (cname), SBYTES (cname)); message_dolog (name, SBYTES (cname), 0, 0); message_dolog (": ", 2, 0, 0); } errname = Fcar (data); if (EQ (errname, Qerror)) { data = Fcdr (data); if (!CONSP (data)) data = Qnil; errmsg = Fcar (data); file_error = Qnil; } else { Lisp_Object error_conditions; errmsg = Fget (errname, Qerror_message); error_conditions = Fget (errname, Qerror_conditions); file_error = Fmemq (Qfile_error, error_conditions); } /* Print an error message including the data items. */ tail = Fcdr_safe (data); GCPRO1 (tail); /* For file-error, make error message by concatenating all the data items. They are all strings. */ if (!NILP (file_error) && CONSP (tail)) errmsg = XCAR (tail), tail = XCDR (tail); if (STRINGP (errmsg)) Fprinc (errmsg, stream); else write_string_1 ("peculiar error", -1, stream); for (i = 0; CONSP (tail); tail = XCDR (tail), i++) { Lisp_Object obj; write_string_1 (i ? ", " : ": ", 2, stream); obj = XCAR (tail); if (!NILP (file_error) || EQ (errname, Qend_of_file)) Fprinc (obj, stream); else Fprin1 (obj, stream); } UNGCPRO; } /* * The buffer should be at least as large as the max string size of the * largest float, printed in the biggest notation. This is undoubtedly * 20d float_output_format, with the negative of the C-constant "HUGE" * from <math.h>. * * On the vax the worst case is -1e38 in 20d format which takes 61 bytes. * * I assume that IEEE-754 format numbers can take 329 bytes for the worst * case of -1e307 in 20d float_output_format. What is one to do (short of * re-writing _doprnt to be more sane)? * -wsr */ void float_to_string (unsigned char *buf, double data) { unsigned char *cp; int width; /* Check for plus infinity in a way that won't lose if there is no plus infinity. */ if (data == data / 2 && data > 1.0) { strcpy (buf, "1.0e+INF"); return; } /* Likewise for minus infinity. */ if (data == data / 2 && data < -1.0) { strcpy (buf, "-1.0e+INF"); return; } /* Check for NaN in a way that won't fail if there are no NaNs. */ if (! (data * 0.0 >= 0.0)) { /* Prepend "-" if the NaN's sign bit is negative. The sign bit of a double is the bit that is 1 in -0.0. */ int i; union { double d; char c[sizeof (double)]; } u_data, u_minus_zero; u_data.d = data; u_minus_zero.d = - 0.0; for (i = 0; i < sizeof (double); i++) if (u_data.c[i] & u_minus_zero.c[i]) { *buf++ = '-'; break; } strcpy (buf, "0.0e+NaN"); return; } if (NILP (Vfloat_output_format) || !STRINGP (Vfloat_output_format)) lose: { /* Generate the fewest number of digits that represent the floating point value without losing information. The following method is simple but a bit slow. For ideas about speeding things up, please see: Guy L Steele Jr & Jon L White, How to print floating-point numbers accurately. SIGPLAN notices 25, 6 (June 1990), 112-126. Robert G Burger & R Kent Dybvig, Printing floating point numbers quickly and accurately, SIGPLAN notices 31, 5 (May 1996), 108-116. */ width = fabs (data) < DBL_MIN ? 1 : DBL_DIG; do sprintf (buf, "%.*g", width, data); while (width++ < DOUBLE_DIGITS_BOUND && atof (buf) != data); } else /* oink oink */ { /* Check that the spec we have is fully valid. This means not only valid for printf, but meant for floats, and reasonable. */ cp = SDATA (Vfloat_output_format); if (cp[0] != '%') goto lose; if (cp[1] != '.') goto lose; cp += 2; /* Check the width specification. */ width = -1; if ('0' <= *cp && *cp <= '9') { width = 0; do width = (width * 10) + (*cp++ - '0'); while (*cp >= '0' && *cp <= '9'); /* A precision of zero is valid only for %f. */ if (width > DBL_DIG || (width == 0 && *cp != 'f')) goto lose; } if (*cp != 'e' && *cp != 'f' && *cp != 'g') goto lose; if (cp[1] != 0) goto lose; sprintf (buf, SDATA (Vfloat_output_format), data); } /* Make sure there is a decimal point with digit after, or an exponent, so that the value is readable as a float. But don't do this with "%.0f"; it's valid for that not to produce a decimal point. Note that width can be 0 only for %.0f. */ if (width != 0) { for (cp = buf; *cp; cp++) if ((*cp < '0' || *cp > '9') && *cp != '-') break; if (*cp == '.' && cp[1] == 0) { cp[1] = '0'; cp[2] = 0; } if (*cp == 0) { *cp++ = '.'; *cp++ = '0'; *cp++ = 0; } } } static void print (Lisp_Object obj, register Lisp_Object printcharfun, int escapeflag) { new_backquote_output = 0; /* Reset print_number_index and Vprint_number_table only when the variable Vprint_continuous_numbering is nil. Otherwise, the values of these variables will be kept between several print functions. */ if (NILP (Vprint_continuous_numbering) || NILP (Vprint_number_table)) { print_number_index = 0; Vprint_number_table = Qnil; } /* Construct Vprint_number_table for print-gensym and print-circle. */ if (!NILP (Vprint_gensym) || !NILP (Vprint_circle)) { int i, start, index; start = index = print_number_index; /* Construct Vprint_number_table. This increments print_number_index for the objects added. */ print_depth = 0; print_preprocess (obj); /* Remove unnecessary objects, which appear only once in OBJ; that is, whose status is Qnil. Compactify the necessary objects. */ for (i = start; i < print_number_index; i++) if (!NILP (PRINT_NUMBER_STATUS (Vprint_number_table, i))) { PRINT_NUMBER_OBJECT (Vprint_number_table, index) = PRINT_NUMBER_OBJECT (Vprint_number_table, i); index++; } /* Clear out objects outside the active part of the table. */ for (i = index; i < print_number_index; i++) PRINT_NUMBER_OBJECT (Vprint_number_table, i) = Qnil; /* Reset the status field for the next print step. Now this field means whether the object has already been printed. */ for (i = start; i < print_number_index; i++) PRINT_NUMBER_STATUS (Vprint_number_table, i) = Qnil; print_number_index = index; } print_depth = 0; print_object (obj, printcharfun, escapeflag); } /* Construct Vprint_number_table according to the structure of OBJ. OBJ itself and all its elements will be added to Vprint_number_table recursively if it is a list, vector, compiled function, char-table, string (its text properties will be traced), or a symbol that has no obarray (this is for the print-gensym feature). The status fields of Vprint_number_table mean whether each object appears more than once in OBJ: Qnil at the first time, and Qt after that . */ static void print_preprocess (Lisp_Object obj) { int i; EMACS_INT size; int loop_count = 0; Lisp_Object halftail; /* Give up if we go so deep that print_object will get an error. */ /* See similar code in print_object. */ if (print_depth >= PRINT_CIRCLE) error ("Apparently circular structure being printed"); /* Avoid infinite recursion for circular nested structure in the case where Vprint_circle is nil. */ if (NILP (Vprint_circle)) { for (i = 0; i < print_depth; i++) if (EQ (obj, being_printed[i])) return; being_printed[print_depth] = obj; } print_depth++; halftail = obj; loop: if (STRINGP (obj) || CONSP (obj) || VECTORP (obj) || COMPILEDP (obj) || CHAR_TABLE_P (obj) || SUB_CHAR_TABLE_P (obj) || HASH_TABLE_P (obj) || (! NILP (Vprint_gensym) && SYMBOLP (obj) && !SYMBOL_INTERNED_P (obj))) { /* In case print-circle is nil and print-gensym is t, add OBJ to Vprint_number_table only when OBJ is a symbol. */ if (! NILP (Vprint_circle) || SYMBOLP (obj)) { for (i = 0; i < print_number_index; i++) if (EQ (PRINT_NUMBER_OBJECT (Vprint_number_table, i), obj)) { /* OBJ appears more than once. Let's remember that. */ PRINT_NUMBER_STATUS (Vprint_number_table, i) = Qt; print_depth--; return; } /* OBJ is not yet recorded. Let's add to the table. */ if (print_number_index == 0) { /* Initialize the table. */ Vprint_number_table = Fmake_vector (make_number (40), Qnil); } else if (XVECTOR (Vprint_number_table)->size == print_number_index * 2) { /* Reallocate the table. */ int i = print_number_index * 4; Lisp_Object old_table = Vprint_number_table; Vprint_number_table = Fmake_vector (make_number (i), Qnil); for (i = 0; i < print_number_index; i++) { PRINT_NUMBER_OBJECT (Vprint_number_table, i) = PRINT_NUMBER_OBJECT (old_table, i); PRINT_NUMBER_STATUS (Vprint_number_table, i) = PRINT_NUMBER_STATUS (old_table, i); } } PRINT_NUMBER_OBJECT (Vprint_number_table, print_number_index) = obj; /* If Vprint_continuous_numbering is non-nil and OBJ is a gensym, always print the gensym with a number. This is a special for the lisp function byte-compile-output-docform. */ if (!NILP (Vprint_continuous_numbering) && SYMBOLP (obj) && !SYMBOL_INTERNED_P (obj)) PRINT_NUMBER_STATUS (Vprint_number_table, print_number_index) = Qt; print_number_index++; } switch (XTYPE (obj)) { case Lisp_String: /* A string may have text properties, which can be circular. */ traverse_intervals_noorder (STRING_INTERVALS (obj), print_preprocess_string, Qnil); break; case Lisp_Cons: /* Use HALFTAIL and LOOP_COUNT to detect circular lists, just as in print_object. */ if (loop_count && EQ (obj, halftail)) break; print_preprocess (XCAR (obj)); obj = XCDR (obj); loop_count++; if (!(loop_count & 1)) halftail = XCDR (halftail); goto loop; case Lisp_Vectorlike: size = XVECTOR (obj)->size; if (size & PSEUDOVECTOR_FLAG) size &= PSEUDOVECTOR_SIZE_MASK; for (i = 0; i < size; i++) print_preprocess (XVECTOR (obj)->contents[i]); if (HASH_TABLE_P (obj)) { /* For hash tables, the key_and_value slot is past `size' because it needs to be marked specially in case the table is weak. */ struct Lisp_Hash_Table *h = XHASH_TABLE (obj); print_preprocess (h->key_and_value); } break; default: break; } } print_depth--; } static void print_preprocess_string (INTERVAL interval, Lisp_Object arg) { print_preprocess (interval->plist); } /* A flag to control printing of `charset' text property. The default value is Qdefault. */ Lisp_Object Vprint_charset_text_property; static void print_check_string_charset_prop (INTERVAL interval, Lisp_Object string); #define PRINT_STRING_NON_CHARSET_FOUND 1 #define PRINT_STRING_UNSAFE_CHARSET_FOUND 2 /* Bitwise or of the above macros. */ static int print_check_string_result; static void print_check_string_charset_prop (INTERVAL interval, Lisp_Object string) { Lisp_Object val; if (NILP (interval->plist) || (print_check_string_result == (PRINT_STRING_NON_CHARSET_FOUND | PRINT_STRING_UNSAFE_CHARSET_FOUND))) return; for (val = interval->plist; CONSP (val) && ! EQ (XCAR (val), Qcharset); val = XCDR (XCDR (val))); if (! CONSP (val)) { print_check_string_result |= PRINT_STRING_NON_CHARSET_FOUND; return; } if (! (print_check_string_result & PRINT_STRING_NON_CHARSET_FOUND)) { if (! EQ (val, interval->plist) || CONSP (XCDR (XCDR (val)))) print_check_string_result |= PRINT_STRING_NON_CHARSET_FOUND; } if (NILP (Vprint_charset_text_property) || ! (print_check_string_result & PRINT_STRING_UNSAFE_CHARSET_FOUND)) { int i, c; EMACS_INT charpos = interval->position; EMACS_INT bytepos = string_char_to_byte (string, charpos); Lisp_Object charset; charset = XCAR (XCDR (val)); for (i = 0; i < LENGTH (interval); i++) { FETCH_STRING_CHAR_ADVANCE (c, string, charpos, bytepos); if (! ASCII_CHAR_P (c) && ! EQ (CHARSET_NAME (CHAR_CHARSET (c)), charset)) { print_check_string_result |= PRINT_STRING_UNSAFE_CHARSET_FOUND; break; } } } } /* The value is (charset . nil). */ static Lisp_Object print_prune_charset_plist; static Lisp_Object print_prune_string_charset (Lisp_Object string) { print_check_string_result = 0; traverse_intervals (STRING_INTERVALS (string), 0, print_check_string_charset_prop, string); if (! (print_check_string_result & PRINT_STRING_UNSAFE_CHARSET_FOUND)) { string = Fcopy_sequence (string); if (print_check_string_result & PRINT_STRING_NON_CHARSET_FOUND) { if (NILP (print_prune_charset_plist)) print_prune_charset_plist = Fcons (Qcharset, Qnil); Fremove_text_properties (make_number (0), make_number (SCHARS (string)), print_prune_charset_plist, string); } else Fset_text_properties (make_number (0), make_number (SCHARS (string)), Qnil, string); } return string; } static void print_object (Lisp_Object obj, register Lisp_Object printcharfun, int escapeflag) { char buf[40]; QUIT; /* See similar code in print_preprocess. */ if (print_depth >= PRINT_CIRCLE) error ("Apparently circular structure being printed"); /* Detect circularities and truncate them. */ if (STRINGP (obj) || CONSP (obj) || VECTORP (obj) || COMPILEDP (obj) || CHAR_TABLE_P (obj) || SUB_CHAR_TABLE_P (obj) || HASH_TABLE_P (obj) || (! NILP (Vprint_gensym) && SYMBOLP (obj) && !SYMBOL_INTERNED_P (obj))) { if (NILP (Vprint_circle) && NILP (Vprint_gensym)) { /* Simple but incomplete way. */ int i; for (i = 0; i < print_depth; i++) if (EQ (obj, being_printed[i])) { sprintf (buf, "#%d", i); strout (buf, -1, -1, printcharfun, 0); return; } being_printed[print_depth] = obj; } else { /* With the print-circle feature. */ int i; for (i = 0; i < print_number_index; i++) if (EQ (PRINT_NUMBER_OBJECT (Vprint_number_table, i), obj)) { if (NILP (PRINT_NUMBER_STATUS (Vprint_number_table, i))) { /* Add a prefix #n= if OBJ has not yet been printed; that is, its status field is nil. */ sprintf (buf, "#%d=", i + 1); strout (buf, -1, -1, printcharfun, 0); /* OBJ is going to be printed. Set the status to t. */ PRINT_NUMBER_STATUS (Vprint_number_table, i) = Qt; break; } else { /* Just print #n# if OBJ has already been printed. */ sprintf (buf, "#%d#", i + 1); strout (buf, -1, -1, printcharfun, 0); return; } } } } print_depth++; switch (XTYPE (obj)) { case_Lisp_Int: if (sizeof (int) == sizeof (EMACS_INT)) sprintf (buf, "%d", (int) XINT (obj)); else if (sizeof (long) == sizeof (EMACS_INT)) sprintf (buf, "%ld", (long) XINT (obj)); else abort (); strout (buf, -1, -1, printcharfun, 0); break; case Lisp_Float: { char pigbuf[350]; /* see comments in float_to_string */ float_to_string (pigbuf, XFLOAT_DATA (obj)); strout (pigbuf, -1, -1, printcharfun, 0); } break; case Lisp_String: if (!escapeflag) print_string (obj, printcharfun); else { register EMACS_INT i, i_byte; struct gcpro gcpro1; unsigned char *str; EMACS_INT size_byte; /* 1 means we must ensure that the next character we output cannot be taken as part of a hex character escape. */ int need_nonhex = 0; int multibyte = STRING_MULTIBYTE (obj); GCPRO1 (obj); if (! EQ (Vprint_charset_text_property, Qt)) obj = print_prune_string_charset (obj); if (!NULL_INTERVAL_P (STRING_INTERVALS (obj))) { PRINTCHAR ('#'); PRINTCHAR ('('); } PRINTCHAR ('\"'); str = SDATA (obj); size_byte = SBYTES (obj); for (i = 0, i_byte = 0; i_byte < size_byte;) { /* Here, we must convert each multi-byte form to the corresponding character code before handing it to PRINTCHAR. */ int len; int c; if (multibyte) { c = STRING_CHAR_AND_LENGTH (str + i_byte, len); i_byte += len; } else c = str[i_byte++]; QUIT; if (c == '\n' && print_escape_newlines) { PRINTCHAR ('\\'); PRINTCHAR ('n'); } else if (c == '\f' && print_escape_newlines) { PRINTCHAR ('\\'); PRINTCHAR ('f'); } else if (multibyte && (CHAR_BYTE8_P (c) || (! ASCII_CHAR_P (c) && print_escape_multibyte))) { /* When multibyte is disabled, print multibyte string chars using hex escapes. For a char code that could be in a unibyte string, when found in a multibyte string, always use a hex escape so it reads back as multibyte. */ unsigned char outbuf[50]; if (CHAR_BYTE8_P (c)) sprintf (outbuf, "\\%03o", CHAR_TO_BYTE8 (c)); else { sprintf (outbuf, "\\x%04x", c); need_nonhex = 1; } strout (outbuf, -1, -1, printcharfun, 0); } else if (! multibyte && SINGLE_BYTE_CHAR_P (c) && ! ASCII_BYTE_P (c) && print_escape_nonascii) { /* When printing in a multibyte buffer or when explicitly requested, print single-byte non-ASCII string chars using octal escapes. */ unsigned char outbuf[5]; sprintf (outbuf, "\\%03o", c); strout (outbuf, -1, -1, printcharfun, 0); } else { /* If we just had a hex escape, and this character could be taken as part of it, output `\ ' to prevent that. */ if (need_nonhex) { need_nonhex = 0; if ((c >= 'a' && c <= 'f') || (c >= 'A' && c <= 'F') || (c >= '0' && c <= '9')) strout ("\\ ", -1, -1, printcharfun, 0); } if (c == '\"' || c == '\\') PRINTCHAR ('\\'); PRINTCHAR (c); } } PRINTCHAR ('\"'); if (!NULL_INTERVAL_P (STRING_INTERVALS (obj))) { traverse_intervals (STRING_INTERVALS (obj), 0, print_interval, printcharfun); PRINTCHAR (')'); } UNGCPRO; } break; case Lisp_Symbol: { register int confusing; register unsigned char *p = SDATA (SYMBOL_NAME (obj)); register unsigned char *end = p + SBYTES (SYMBOL_NAME (obj)); register int c; int i, i_byte; EMACS_INT size_byte; Lisp_Object name; name = SYMBOL_NAME (obj); if (p != end && (*p == '-' || *p == '+')) p++; if (p == end) confusing = 0; /* If symbol name begins with a digit, and ends with a digit, and contains nothing but digits and `e', it could be treated as a number. So set CONFUSING. Symbols that contain periods could also be taken as numbers, but periods are always escaped, so we don't have to worry about them here. */ else if (*p >= '0' && *p <= '9' && end[-1] >= '0' && end[-1] <= '9') { while (p != end && ((*p >= '0' && *p <= '9') /* Needed for \2e10. */ || *p == 'e' || *p == 'E')) p++; confusing = (end == p); } else confusing = 0; if (! NILP (Vprint_gensym) && !SYMBOL_INTERNED_P (obj)) { PRINTCHAR ('#'); PRINTCHAR (':'); } size_byte = SBYTES (name); for (i = 0, i_byte = 0; i_byte < size_byte;) { /* Here, we must convert each multi-byte form to the corresponding character code before handing it to PRINTCHAR. */ FETCH_STRING_CHAR_ADVANCE (c, name, i, i_byte); QUIT; if (escapeflag) { if (c == '\"' || c == '\\' || c == '\'' || c == ';' || c == '#' || c == '(' || c == ')' || c == ',' || c =='.' || c == '`' || c == '[' || c == ']' || c == '?' || c <= 040 || confusing) PRINTCHAR ('\\'), confusing = 0; } PRINTCHAR (c); } } break; case Lisp_Cons: /* If deeper than spec'd depth, print placeholder. */ if (INTEGERP (Vprint_level) && print_depth > XINT (Vprint_level)) strout ("...", -1, -1, printcharfun, 0); else if (print_quoted && CONSP (XCDR (obj)) && NILP (XCDR (XCDR (obj))) && (EQ (XCAR (obj), Qquote))) { PRINTCHAR ('\''); print_object (XCAR (XCDR (obj)), printcharfun, escapeflag); } else if (print_quoted && CONSP (XCDR (obj)) && NILP (XCDR (XCDR (obj))) && (EQ (XCAR (obj), Qfunction))) { PRINTCHAR ('#'); PRINTCHAR ('\''); print_object (XCAR (XCDR (obj)), printcharfun, escapeflag); } else if (print_quoted && CONSP (XCDR (obj)) && NILP (XCDR (XCDR (obj))) && ((EQ (XCAR (obj), Qbackquote)))) { print_object (XCAR (obj), printcharfun, 0); new_backquote_output++; print_object (XCAR (XCDR (obj)), printcharfun, escapeflag); new_backquote_output--; } else if (print_quoted && CONSP (XCDR (obj)) && NILP (XCDR (XCDR (obj))) && new_backquote_output && ((EQ (XCAR (obj), Qbackquote) || EQ (XCAR (obj), Qcomma) || EQ (XCAR (obj), Qcomma_at) || EQ (XCAR (obj), Qcomma_dot)))) { print_object (XCAR (obj), printcharfun, 0); new_backquote_output--; print_object (XCAR (XCDR (obj)), printcharfun, escapeflag); new_backquote_output++; } else { PRINTCHAR ('('); /* If the first element is a backquote form, print it old-style so it won't be misunderstood. */ if (print_quoted && CONSP (XCAR (obj)) && CONSP (XCDR (XCAR (obj))) && NILP (XCDR (XCDR (XCAR (obj)))) && EQ (XCAR (XCAR (obj)), Qbackquote)) { Lisp_Object tem; tem = XCAR (obj); PRINTCHAR ('('); print_object (Qbackquote, printcharfun, 0); PRINTCHAR (' '); print_object (XCAR (XCDR (tem)), printcharfun, 0); PRINTCHAR (')'); obj = XCDR (obj); } { EMACS_INT print_length; int i; Lisp_Object halftail = obj; /* Negative values of print-length are invalid in CL. Treat them like nil, as CMUCL does. */ if (NATNUMP (Vprint_length)) print_length = XFASTINT (Vprint_length); else print_length = 0; i = 0; while (CONSP (obj)) { /* Detect circular list. */ if (NILP (Vprint_circle)) { /* Simple but imcomplete way. */ if (i != 0 && EQ (obj, halftail)) { sprintf (buf, " . #%d", i / 2); strout (buf, -1, -1, printcharfun, 0); goto end_of_list; } } else { /* With the print-circle feature. */ if (i != 0) { int i; for (i = 0; i < print_number_index; i++) if (EQ (PRINT_NUMBER_OBJECT (Vprint_number_table, i), obj)) { if (NILP (PRINT_NUMBER_STATUS (Vprint_number_table, i))) { strout (" . ", 3, 3, printcharfun, 0); print_object (obj, printcharfun, escapeflag); } else { sprintf (buf, " . #%d#", i + 1); strout (buf, -1, -1, printcharfun, 0); } goto end_of_list; } } } if (i++) PRINTCHAR (' '); if (print_length && i > print_length) { strout ("...", 3, 3, printcharfun, 0); goto end_of_list; } print_object (XCAR (obj), printcharfun, escapeflag); obj = XCDR (obj); if (!(i & 1)) halftail = XCDR (halftail); } } /* OBJ non-nil here means it's the end of a dotted list. */ if (!NILP (obj)) { strout (" . ", 3, 3, printcharfun, 0); print_object (obj, printcharfun, escapeflag); } end_of_list: PRINTCHAR (')'); } break; case Lisp_Vectorlike: if (PROCESSP (obj)) { if (escapeflag) { strout ("#<process ", -1, -1, printcharfun, 0); print_string (XPROCESS (obj)->name, printcharfun); PRINTCHAR ('>'); } else print_string (XPROCESS (obj)->name, printcharfun); } else if (BOOL_VECTOR_P (obj)) { register int i; register unsigned char c; struct gcpro gcpro1; EMACS_INT size_in_chars = ((XBOOL_VECTOR (obj)->size + BOOL_VECTOR_BITS_PER_CHAR - 1) / BOOL_VECTOR_BITS_PER_CHAR); GCPRO1 (obj); PRINTCHAR ('#'); PRINTCHAR ('&'); sprintf (buf, "%ld", (long) XBOOL_VECTOR (obj)->size); strout (buf, -1, -1, printcharfun, 0); PRINTCHAR ('\"'); /* Don't print more characters than the specified maximum. Negative values of print-length are invalid. Treat them like a print-length of nil. */ if (NATNUMP (Vprint_length) && XFASTINT (Vprint_length) < size_in_chars) size_in_chars = XFASTINT (Vprint_length); for (i = 0; i < size_in_chars; i++) { QUIT; c = XBOOL_VECTOR (obj)->data[i]; if (c == '\n' && print_escape_newlines) { PRINTCHAR ('\\'); PRINTCHAR ('n'); } else if (c == '\f' && print_escape_newlines) { PRINTCHAR ('\\'); PRINTCHAR ('f'); } else if (c > '\177') { /* Use octal escapes to avoid encoding issues. */ PRINTCHAR ('\\'); PRINTCHAR ('0' + ((c >> 6) & 3)); PRINTCHAR ('0' + ((c >> 3) & 7)); PRINTCHAR ('0' + (c & 7)); } else { if (c == '\"' || c == '\\') PRINTCHAR ('\\'); PRINTCHAR (c); } } PRINTCHAR ('\"'); UNGCPRO; } else if (SUBRP (obj)) { strout ("#<subr ", -1, -1, printcharfun, 0); strout (XSUBR (obj)->symbol_name, -1, -1, printcharfun, 0); PRINTCHAR ('>'); } else if (WINDOWP (obj)) { strout ("#<window ", -1, -1, printcharfun, 0); sprintf (buf, "%ld", (long) XFASTINT (XWINDOW (obj)->sequence_number)); strout (buf, -1, -1, printcharfun, 0); if (!NILP (XWINDOW (obj)->buffer)) { strout (" on ", -1, -1, printcharfun, 0); print_string (XBUFFER (XWINDOW (obj)->buffer)->name, printcharfun); } PRINTCHAR ('>'); } else if (TERMINALP (obj)) { struct terminal *t = XTERMINAL (obj); strout ("#<terminal ", -1, -1, printcharfun, 0); sprintf (buf, "%d", t->id); strout (buf, -1, -1, printcharfun, 0); if (t->name) { strout (" on ", -1, -1, printcharfun, 0); strout (t->name, -1, -1, printcharfun, 0); } PRINTCHAR ('>'); } else if (HASH_TABLE_P (obj)) { struct Lisp_Hash_Table *h = XHASH_TABLE (obj); int i; EMACS_INT real_size, size; #if 0 strout ("#<hash-table", -1, -1, printcharfun, 0); if (SYMBOLP (h->test)) { PRINTCHAR (' '); PRINTCHAR ('\''); strout (SDATA (SYMBOL_NAME (h->test)), -1, -1, printcharfun, 0); PRINTCHAR (' '); strout (SDATA (SYMBOL_NAME (h->weak)), -1, -1, printcharfun, 0); PRINTCHAR (' '); sprintf (buf, "%ld/%ld", (long) h->count, (long) XVECTOR (h->next)->size); strout (buf, -1, -1, printcharfun, 0); } sprintf (buf, " 0x%lx", (unsigned long) h); strout (buf, -1, -1, printcharfun, 0); PRINTCHAR ('>'); #endif /* Implement a readable output, e.g.: #s(hash-table size 2 test equal data (k1 v1 k2 v2)) */ /* Always print the size. */ sprintf (buf, "#s(hash-table size %ld", (long) XVECTOR (h->next)->size); strout (buf, -1, -1, printcharfun, 0); if (!NILP (h->test)) { strout (" test ", -1, -1, printcharfun, 0); print_object (h->test, printcharfun, 0); } if (!NILP (h->weak)) { strout (" weakness ", -1, -1, printcharfun, 0); print_object (h->weak, printcharfun, 0); } if (!NILP (h->rehash_size)) { strout (" rehash-size ", -1, -1, printcharfun, 0); print_object (h->rehash_size, printcharfun, 0); } if (!NILP (h->rehash_threshold)) { strout (" rehash-threshold ", -1, -1, printcharfun, 0); print_object (h->rehash_threshold, printcharfun, 0); } strout (" data ", -1, -1, printcharfun, 0); /* Print the data here as a plist. */ real_size = HASH_TABLE_SIZE (h); size = real_size; /* Don't print more elements than the specified maximum. */ if (NATNUMP (Vprint_length) && XFASTINT (Vprint_length) < size) size = XFASTINT (Vprint_length); PRINTCHAR ('('); for (i = 0; i < size; i++) if (!NILP (HASH_HASH (h, i))) { if (i) PRINTCHAR (' '); print_object (HASH_KEY (h, i), printcharfun, 1); PRINTCHAR (' '); print_object (HASH_VALUE (h, i), printcharfun, 1); } if (size < real_size) strout (" ...", 4, 4, printcharfun, 0); PRINTCHAR (')'); PRINTCHAR (')'); } else if (BUFFERP (obj)) { if (NILP (XBUFFER (obj)->name)) strout ("#<killed buffer>", -1, -1, printcharfun, 0); else if (escapeflag) { strout ("#<buffer ", -1, -1, printcharfun, 0); print_string (XBUFFER (obj)->name, printcharfun); PRINTCHAR ('>'); } else print_string (XBUFFER (obj)->name, printcharfun); } else if (WINDOW_CONFIGURATIONP (obj)) { strout ("#<window-configuration>", -1, -1, printcharfun, 0); } else if (FRAMEP (obj)) { strout ((FRAME_LIVE_P (XFRAME (obj)) ? "#<frame " : "#<dead frame "), -1, -1, printcharfun, 0); print_string (XFRAME (obj)->name, printcharfun); sprintf (buf, " 0x%lx", (unsigned long) (XFRAME (obj))); strout (buf, -1, -1, printcharfun, 0); PRINTCHAR ('>'); } else if (FONTP (obj)) { EMACS_INT i; if (! FONT_OBJECT_P (obj)) { if (FONT_SPEC_P (obj)) strout ("#<font-spec", -1, -1, printcharfun, 0); else strout ("#<font-entity", -1, -1, printcharfun, 0); for (i = 0; i < FONT_SPEC_MAX; i++) { PRINTCHAR (' '); if (i < FONT_WEIGHT_INDEX || i > FONT_WIDTH_INDEX) print_object (AREF (obj, i), printcharfun, escapeflag); else print_object (font_style_symbolic (obj, i, 0), printcharfun, escapeflag); } } else { strout ("#<font-object ", -1, -1, printcharfun, 0); print_object (AREF (obj, FONT_NAME_INDEX), printcharfun, escapeflag); } PRINTCHAR ('>'); } else { EMACS_INT size = XVECTOR (obj)->size; if (COMPILEDP (obj)) { PRINTCHAR ('#'); size &= PSEUDOVECTOR_SIZE_MASK; } if (CHAR_TABLE_P (obj) || SUB_CHAR_TABLE_P (obj)) { /* We print a char-table as if it were a vector, lumping the parent and default slots in with the character slots. But we add #^ as a prefix. */ /* Make each lowest sub_char_table start a new line. Otherwise we'll make a line extremely long, which results in slow redisplay. */ if (SUB_CHAR_TABLE_P (obj) && XINT (XSUB_CHAR_TABLE (obj)->depth) == 3) PRINTCHAR ('\n'); PRINTCHAR ('#'); PRINTCHAR ('^'); if (SUB_CHAR_TABLE_P (obj)) PRINTCHAR ('^'); size &= PSEUDOVECTOR_SIZE_MASK; } if (size & PSEUDOVECTOR_FLAG) goto badtype; PRINTCHAR ('['); { register int i; register Lisp_Object tem; EMACS_INT real_size = size; /* Don't print more elements than the specified maximum. */ if (NATNUMP (Vprint_length) && XFASTINT (Vprint_length) < size) size = XFASTINT (Vprint_length); for (i = 0; i < size; i++) { if (i) PRINTCHAR (' '); tem = XVECTOR (obj)->contents[i]; print_object (tem, printcharfun, escapeflag); } if (size < real_size) strout (" ...", 4, 4, printcharfun, 0); } PRINTCHAR (']'); } break; case Lisp_Misc: switch (XMISCTYPE (obj)) { case Lisp_Misc_Marker: strout ("#<marker ", -1, -1, printcharfun, 0); /* Do you think this is necessary? */ if (XMARKER (obj)->insertion_type != 0) strout ("(moves after insertion) ", -1, -1, printcharfun, 0); if (! XMARKER (obj)->buffer) strout ("in no buffer", -1, -1, printcharfun, 0); else { sprintf (buf, "at %ld", (long)marker_position (obj)); strout (buf, -1, -1, printcharfun, 0); strout (" in ", -1, -1, printcharfun, 0); print_string (XMARKER (obj)->buffer->name, printcharfun); } PRINTCHAR ('>'); break; case Lisp_Misc_Overlay: strout ("#<overlay ", -1, -1, printcharfun, 0); if (! XMARKER (OVERLAY_START (obj))->buffer) strout ("in no buffer", -1, -1, printcharfun, 0); else { sprintf (buf, "from %ld to %ld in ", (long)marker_position (OVERLAY_START (obj)), (long)marker_position (OVERLAY_END (obj))); strout (buf, -1, -1, printcharfun, 0); print_string (XMARKER (OVERLAY_START (obj))->buffer->name, printcharfun); } PRINTCHAR ('>'); break; /* Remaining cases shouldn't happen in normal usage, but let's print them anyway for the benefit of the debugger. */ case Lisp_Misc_Free: strout ("#<misc free cell>", -1, -1, printcharfun, 0); break; case Lisp_Misc_Save_Value: strout ("#<save_value ", -1, -1, printcharfun, 0); sprintf(buf, "ptr=0x%08lx int=%d", (unsigned long) XSAVE_VALUE (obj)->pointer, XSAVE_VALUE (obj)->integer); strout (buf, -1, -1, printcharfun, 0); PRINTCHAR ('>'); break; default: goto badtype; } break; default: badtype: { /* We're in trouble if this happens! Probably should just abort () */ strout ("#<EMACS BUG: INVALID DATATYPE ", -1, -1, printcharfun, 0); if (MISCP (obj)) sprintf (buf, "(MISC 0x%04x)", (int) XMISCTYPE (obj)); else if (VECTORLIKEP (obj)) sprintf (buf, "(PVEC 0x%08x)", (int) XVECTOR (obj)->size); else sprintf (buf, "(0x%02x)", (int) XTYPE (obj)); strout (buf, -1, -1, printcharfun, 0); strout (" Save your buffers immediately and please report this bug>", -1, -1, printcharfun, 0); } } print_depth--; } /* Print a description of INTERVAL using PRINTCHARFUN. This is part of printing a string that has text properties. */ void print_interval (INTERVAL interval, Lisp_Object printcharfun) { if (NILP (interval->plist)) return; PRINTCHAR (' '); print_object (make_number (interval->position), printcharfun, 1); PRINTCHAR (' '); print_object (make_number (interval->position + LENGTH (interval)), printcharfun, 1); PRINTCHAR (' '); print_object (interval->plist, printcharfun, 1); } void syms_of_print (void) { Qtemp_buffer_setup_hook = intern_c_string ("temp-buffer-setup-hook"); staticpro (&Qtemp_buffer_setup_hook); DEFVAR_LISP ("standard-output", &Vstandard_output, doc: /* Output stream `print' uses by default for outputting a character. This may be any function of one argument. It may also be a buffer (output is inserted before point) or a marker (output is inserted and the marker is advanced) or the symbol t (output appears in the echo area). */); Vstandard_output = Qt; Qstandard_output = intern_c_string ("standard-output"); staticpro (&Qstandard_output); DEFVAR_LISP ("float-output-format", &Vfloat_output_format, doc: /* The format descriptor string used to print floats. This is a %-spec like those accepted by `printf' in C, but with some restrictions. It must start with the two characters `%.'. After that comes an integer precision specification, and then a letter which controls the format. The letters allowed are `e', `f' and `g'. Use `e' for exponential notation \"DIG.DIGITSeEXPT\" Use `f' for decimal point notation \"DIGITS.DIGITS\". Use `g' to choose the shorter of those two formats for the number at hand. The precision in any of these cases is the number of digits following the decimal point. With `f', a precision of 0 means to omit the decimal point. 0 is not allowed with `e' or `g'. A value of nil means to use the shortest notation that represents the number without losing information. */); Vfloat_output_format = Qnil; Qfloat_output_format = intern_c_string ("float-output-format"); staticpro (&Qfloat_output_format); DEFVAR_LISP ("print-length", &Vprint_length, doc: /* Maximum length of list to print before abbreviating. A value of nil means no limit. See also `eval-expression-print-length'. */); Vprint_length = Qnil; DEFVAR_LISP ("print-level", &Vprint_level, doc: /* Maximum depth of list nesting to print before abbreviating. A value of nil means no limit. See also `eval-expression-print-level'. */); Vprint_level = Qnil; DEFVAR_BOOL ("print-escape-newlines", &print_escape_newlines, doc: /* Non-nil means print newlines in strings as `\\n'. Also print formfeeds as `\\f'. */); print_escape_newlines = 0; DEFVAR_BOOL ("print-escape-nonascii", &print_escape_nonascii, doc: /* Non-nil means print unibyte non-ASCII chars in strings as \\OOO. \(OOO is the octal representation of the character code.) Only single-byte characters are affected, and only in `prin1'. When the output goes in a multibyte buffer, this feature is enabled regardless of the value of the variable. */); print_escape_nonascii = 0; DEFVAR_BOOL ("print-escape-multibyte", &print_escape_multibyte, doc: /* Non-nil means print multibyte characters in strings as \\xXXXX. \(XXXX is the hex representation of the character code.) This affects only `prin1'. */); print_escape_multibyte = 0; DEFVAR_BOOL ("print-quoted", &print_quoted, doc: /* Non-nil means print quoted forms with reader syntax. I.e., (quote foo) prints as 'foo, (function foo) as #'foo. */); print_quoted = 0; DEFVAR_LISP ("print-gensym", &Vprint_gensym, doc: /* Non-nil means print uninterned symbols so they will read as uninterned. I.e., the value of (make-symbol \"foobar\") prints as #:foobar. When the uninterned symbol appears within a recursive data structure, and the symbol appears more than once, in addition use the #N# and #N= constructs as needed, so that multiple references to the same symbol are shared once again when the text is read back. */); Vprint_gensym = Qnil; DEFVAR_LISP ("print-circle", &Vprint_circle, doc: /* *Non-nil means print recursive structures using #N= and #N# syntax. If nil, printing proceeds recursively and may lead to `max-lisp-eval-depth' being exceeded or an error may occur: \"Apparently circular structure being printed.\" Also see `print-length' and `print-level'. If non-nil, shared substructures anywhere in the structure are printed with `#N=' before the first occurrence (in the order of the print representation) and `#N#' in place of each subsequent occurrence, where N is a positive decimal integer. */); Vprint_circle = Qnil; DEFVAR_LISP ("print-continuous-numbering", &Vprint_continuous_numbering, doc: /* *Non-nil means number continuously across print calls. This affects the numbers printed for #N= labels and #M# references. See also `print-circle', `print-gensym', and `print-number-table'. This variable should not be set with `setq'; bind it with a `let' instead. */); Vprint_continuous_numbering = Qnil; DEFVAR_LISP ("print-number-table", &Vprint_number_table, doc: /* A vector used internally to produce `#N=' labels and `#N#' references. The Lisp printer uses this vector to detect Lisp objects referenced more than once. When you bind `print-continuous-numbering' to t, you should probably also bind `print-number-table' to nil. This ensures that the value of `print-number-table' can be garbage-collected once the printing is done. If all elements of `print-number-table' are nil, it means that the printing done so far has not found any shared structure or objects that need to be recorded in the table. */); Vprint_number_table = Qnil; DEFVAR_LISP ("print-charset-text-property", &Vprint_charset_text_property, doc: /* A flag to control printing of `charset' text property on printing a string. The value must be nil, t, or `default'. If the value is nil, don't print the text property `charset'. If the value is t, always print the text property `charset'. If the value is `default', print the text property `charset' only when the value is different from what is guessed in the current charset priorities. */); Vprint_charset_text_property = Qdefault; /* prin1_to_string_buffer initialized in init_buffer_once in buffer.c */ staticpro (&Vprin1_to_string_buffer); defsubr (&Sprin1); defsubr (&Sprin1_to_string); defsubr (&Serror_message_string); defsubr (&Sprinc); defsubr (&Sprint); defsubr (&Sterpri); defsubr (&Swrite_char); defsubr (&Sexternal_debugging_output); #ifdef WITH_REDIRECT_DEBUGGING_OUTPUT defsubr (&Sredirect_debugging_output); #endif Qexternal_debugging_output = intern_c_string ("external-debugging-output"); staticpro (&Qexternal_debugging_output); Qprint_escape_newlines = intern_c_string ("print-escape-newlines"); staticpro (&Qprint_escape_newlines); Qprint_escape_multibyte = intern_c_string ("print-escape-multibyte"); staticpro (&Qprint_escape_multibyte); Qprint_escape_nonascii = intern_c_string ("print-escape-nonascii"); staticpro (&Qprint_escape_nonascii); print_prune_charset_plist = Qnil; staticpro (&print_prune_charset_plist); defsubr (&Swith_output_to_temp_buffer); } /* arch-tag: bc797170-94ae-41de-86e3-75e20f8f7a39 (do not change this comment) */