Remove WINNT_SUPPORT from src/Makefile.in,
* src/Makefile.in (WINNT_SUPPORT): Remove, nt build does not use this file
but rather makefile.w32-in.
(lisp): Remove WINNT_SUPPORT.
;;; inf-lisp.el --- an inferior-lisp mode;; Copyright (C) 1988, 1993, 1994, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010;; Free Software Foundation, Inc.;; Author: Olin Shivers <shivers@cs.cmu.edu>;; Keywords: processes, lisp;; This file is part of GNU Emacs.;; GNU Emacs is free software: you can redistribute it and/or modify;; it under the terms of the GNU General Public License as published by;; the Free Software Foundation, either version 3 of the License, or;; (at your option) any later version.;; GNU Emacs is distributed in the hope that it will be useful,;; but WITHOUT ANY WARRANTY; without even the implied warranty of;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the;; GNU General Public License for more details.;; You should have received a copy of the GNU General Public License;; along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>.;;; Commentary:;; Hacked from tea.el by Olin Shivers (shivers@cs.cmu.edu). 8/88;; This file defines a lisp-in-a-buffer package (inferior-lisp mode);; built on top of comint mode. This version is more featureful,;; robust, and uniform than the Emacs 18 version. The key bindings are;; also more compatible with the bindings of Hemlock and Zwei (the;; Lisp Machine emacs).;; Since this mode is built on top of the general command-interpreter-in-;; a-buffer mode (comint mode), it shares a common base functionality,;; and a common set of bindings, with all modes derived from comint mode.;; This makes these modes easier to use.;; For documentation on the functionality provided by comint mode, and;; the hooks available for customising it, see the file comint.el.;; For further information on inferior-lisp mode, see the comments below.;; Needs fixin:;; The load-file/compile-file default mechanism could be smarter -- it;; doesn't know about the relationship between filename extensions and;; whether the file is source or executable. If you compile foo.lisp;; with compile-file, then the next load-file should use foo.bin for;; the default, not foo.lisp. This is tricky to do right, particularly;; because the extension for executable files varies so much (.o, .bin,;; .lbin, .mo, .vo, .ao, ...).;;;; It would be nice if inferior-lisp (and inferior scheme, T, ...) modes;; had a verbose minor mode wherein sending or compiling defuns, etc.;; would be reflected in the transcript with suitable comments, e.g.;; ";;; redefining fact". Several ways to do this. Which is right?;;;; When sending text from a source file to a subprocess, the process-mark can;; move off the window, so you can lose sight of the process interactions.;; Maybe I should ensure the process mark is in the window when I send;; text to the process? Switch selectable?;;; Code:(require 'comint)(require 'lisp-mode)(defgroup inferior-lisp nil "Run an outside Lisp in an Emacs buffer." :group 'lisp :version "22.1");;;###autoload(defcustom inferior-lisp-filter-regexp (purecopy "\\`\\s *\\(:\\(\\w\\|\\s_\\)\\)?\\s *\\'") "*What not to save on inferior Lisp's input history.Input matching this regexp is not saved on the input history in Inferior Lispmode. Default is whitespace followed by 0 or 1 single-letter colon-keyword\(as in :a, :c, etc.)" :type 'regexp :group 'inferior-lisp)(defvar inferior-lisp-mode-map nil)(unless inferior-lisp-mode-map (setq inferior-lisp-mode-map (copy-keymap comint-mode-map)) (set-keymap-parent inferior-lisp-mode-map lisp-mode-shared-map) (define-key inferior-lisp-mode-map "\C-x\C-e" 'lisp-eval-last-sexp) (define-key inferior-lisp-mode-map "\C-c\C-l" 'lisp-load-file) (define-key inferior-lisp-mode-map "\C-c\C-k" 'lisp-compile-file) (define-key inferior-lisp-mode-map "\C-c\C-a" 'lisp-show-arglist) (define-key inferior-lisp-mode-map "\C-c\C-d" 'lisp-describe-sym) (define-key inferior-lisp-mode-map "\C-c\C-f" 'lisp-show-function-documentation) (define-key inferior-lisp-mode-map "\C-c\C-v" 'lisp-show-variable-documentation));;; These commands augment Lisp mode, so you can process Lisp code in;;; the source files.(define-key lisp-mode-map "\M-\C-x" 'lisp-eval-defun) ; Gnu convention(define-key lisp-mode-map "\C-x\C-e" 'lisp-eval-last-sexp) ; Gnu convention(define-key lisp-mode-map "\C-c\C-e" 'lisp-eval-defun)(define-key lisp-mode-map "\C-c\C-r" 'lisp-eval-region)(define-key lisp-mode-map "\C-c\C-c" 'lisp-compile-defun)(define-key lisp-mode-map "\C-c\C-z" 'switch-to-lisp)(define-key lisp-mode-map "\C-c\C-l" 'lisp-load-file)(define-key lisp-mode-map "\C-c\C-k" 'lisp-compile-file) ; "kompile" file(define-key lisp-mode-map "\C-c\C-a" 'lisp-show-arglist)(define-key lisp-mode-map "\C-c\C-d" 'lisp-describe-sym)(define-key lisp-mode-map "\C-c\C-f" 'lisp-show-function-documentation)(define-key lisp-mode-map "\C-c\C-v" 'lisp-show-variable-documentation);;; This function exists for backwards compatibility.;;; Previous versions of this package bound commands to C-c <letter>;;; bindings, which is not allowed by the gnumacs standard.;;; "This function binds many inferior-lisp commands to C-c <letter> bindings,;;;where they are more accessible. C-c <letter> bindings are reserved for the;;;user, so these bindings are non-standard. If you want them, you should;;;have this function called by the inferior-lisp-load-hook:;;; (add-hook 'inferior-lisp-load-hook 'inferior-lisp-install-letter-bindings);;;You can modify this function to install just the bindings you want."(defun inferior-lisp-install-letter-bindings () (define-key lisp-mode-map "\C-ce" 'lisp-eval-defun-and-go) (define-key lisp-mode-map "\C-cr" 'lisp-eval-region-and-go) (define-key lisp-mode-map "\C-cc" 'lisp-compile-defun-and-go) (define-key lisp-mode-map "\C-cz" 'switch-to-lisp) (define-key lisp-mode-map "\C-cl" 'lisp-load-file) (define-key lisp-mode-map "\C-ck" 'lisp-compile-file) (define-key lisp-mode-map "\C-ca" 'lisp-show-arglist) (define-key lisp-mode-map "\C-cd" 'lisp-describe-sym) (define-key lisp-mode-map "\C-cf" 'lisp-show-function-documentation) (define-key lisp-mode-map "\C-cv" 'lisp-show-variable-documentation) (define-key inferior-lisp-mode-map "\C-cl" 'lisp-load-file) (define-key inferior-lisp-mode-map "\C-ck" 'lisp-compile-file) (define-key inferior-lisp-mode-map "\C-ca" 'lisp-show-arglist) (define-key inferior-lisp-mode-map "\C-cd" 'lisp-describe-sym) (define-key inferior-lisp-mode-map "\C-cf" 'lisp-show-function-documentation) (define-key inferior-lisp-mode-map "\C-cv" 'lisp-show-variable-documentation));;;###autoload(defcustom inferior-lisp-program (purecopy "lisp") "*Program name for invoking an inferior Lisp in Inferior Lisp mode." :type 'string :group 'inferior-lisp);;;###autoload(defcustom inferior-lisp-load-command (purecopy "(load \"%s\")\n") "*Format-string for building a Lisp expression to load a file.This format string should use `%s' to substitute a file nameand should result in a Lisp expression that will command the inferior Lispto load that file. The default works acceptably on most Lisps.The string \"(progn (load \\\"%s\\\" :verbose nil :print t) (values))\\n\"produces cosmetically superior output for this application,but it works only in Common Lisp." :type 'string :group 'inferior-lisp);;;###autoload(defcustom inferior-lisp-prompt (purecopy "^[^> \n]*>+:? *") "Regexp to recognize prompts in the Inferior Lisp mode.Defaults to \"^[^> \\n]*>+:? *\", which works pretty good for Lucid, kcl,and franz. This variable is used to initialize `comint-prompt-regexp' in theInferior Lisp buffer.This variable is only used if the variable`comint-use-prompt-regexp' is non-nil.More precise choices:Lucid Common Lisp: \"^\\\\(>\\\\|\\\\(->\\\\)+\\\\) *\"franz: \"^\\\\(->\\\\|<[0-9]*>:\\\\) *\"kcl: \"^>+ *\"This is a fine thing to set in your .emacs file or through Custom." :type 'regexp :group 'inferior-lisp)(defvar inferior-lisp-buffer nil "*The current inferior-lisp process buffer.MULTIPLE PROCESS SUPPORT===========================================================================To run multiple Lisp processes, you start the first upwith \\[inferior-lisp]. It will be in a buffer named `*inferior-lisp*'.Rename this buffer with \\[rename-buffer]. You may now start up a newprocess with another \\[inferior-lisp]. It will be in a new buffer,named `*inferior-lisp*'. You can switch between the different processbuffers with \\[switch-to-buffer].Commands that send text from source buffers to Lisp processes --like `lisp-eval-defun' or `lisp-show-arglist' -- have to choose a processto send to, when you have more than one Lisp process around. Thisis determined by the global variable `inferior-lisp-buffer'. Suppose youhave three inferior Lisps running: Buffer Process foo inferior-lisp bar inferior-lisp<2> *inferior-lisp* inferior-lisp<3>If you do a \\[lisp-eval-defun] command on some Lisp source code,what process do you send it to?- If you're in a process buffer (foo, bar, or *inferior-lisp*), you send it to that process.- If you're in some other buffer (e.g., a source file), you send it to the process attached to buffer `inferior-lisp-buffer'.This process selection is performed by function `inferior-lisp-proc'.Whenever \\[inferior-lisp] fires up a new process, it resets`inferior-lisp-buffer' to be the new process's buffer. If you only runone process, this does the right thing. If you run multipleprocesses, you can change `inferior-lisp-buffer' to another processbuffer with \\[set-variable].");;;###autoload(defvar inferior-lisp-mode-hook '() "*Hook for customizing Inferior Lisp mode.")(put 'inferior-lisp-mode 'mode-class 'special)(defun inferior-lisp-mode () "Major mode for interacting with an inferior Lisp process.Runs a Lisp interpreter as a subprocess of Emacs, with Lisp I/O through anEmacs buffer. Variable `inferior-lisp-program' controls which Lisp interpreteris run. Variables `inferior-lisp-prompt', `inferior-lisp-filter-regexp' and`inferior-lisp-load-command' can customize this mode for different Lispinterpreters.For information on running multiple processes in multiple buffers, seedocumentation for variable `inferior-lisp-buffer'.\\{inferior-lisp-mode-map}Customization: Entry to this mode runs the hooks on `comint-mode-hook' and`inferior-lisp-mode-hook' (in that order).You can send text to the inferior Lisp process from other buffers containingLisp source. `switch-to-lisp' switches the current buffer to the Lisp process buffer. `lisp-eval-defun' sends the current defun to the Lisp process. `lisp-compile-defun' compiles the current defun. `lisp-eval-region' sends the current region to the Lisp process. `lisp-compile-region' compiles the current region. Prefixing the lisp-eval/compile-defun/region commands with a \\[universal-argument] causes a switch to the Lisp process buffer after sending the text.Commands:\\<inferior-lisp-mode-map>\\[comint-send-input] after the end of the process' output sends the text from the end of process to point.\\[comint-send-input] before the end of the process' output copies the sexp ending at point to the end of the process' output, and sends it.\\[comint-copy-old-input] copies the sexp ending at point to the end of the process' output, allowing you to edit it before sending it.If `comint-use-prompt-regexp' is nil (the default), \\[comint-insert-input] on old input copies the entire old input to the end of the process' output, allowing you to edit it before sending it. When not used on old input, or if `comint-use-prompt-regexp' is non-nil, \\[comint-insert-input] behaves according to its global binding.\\[backward-delete-char-untabify] converts tabs to spaces as it moves back.\\[lisp-indent-line] indents for Lisp; with argument, shifts rest of expression rigidly with the current line.\\[indent-sexp] does \\[lisp-indent-line] on each line starting within following expression.Paragraphs are separated only by blank lines. Semicolons start comments.If you accidentally suspend your process, use \\[comint-continue-subjob]to continue it." (interactive) (delay-mode-hooks (comint-mode)) (setq comint-prompt-regexp inferior-lisp-prompt) (setq major-mode 'inferior-lisp-mode) (setq mode-name "Inferior Lisp") (setq mode-line-process '(":%s")) (lisp-mode-variables t) (use-local-map inferior-lisp-mode-map) ;c-c c-k for "kompile" file (setq comint-get-old-input (function lisp-get-old-input)) (setq comint-input-filter (function lisp-input-filter)) (run-mode-hooks 'inferior-lisp-mode-hook))(defun lisp-get-old-input () "Return a string containing the sexp ending at point." (save-excursion (let ((end (point))) (backward-sexp) (buffer-substring (point) end))))(defun lisp-input-filter (str) "t if STR does not match `inferior-lisp-filter-regexp'." (not (string-match inferior-lisp-filter-regexp str)));;;###autoload(defun inferior-lisp (cmd) "Run an inferior Lisp process, input and output via buffer `*inferior-lisp*'.If there is a process already running in `*inferior-lisp*', just switchto that buffer.With argument, allows you to edit the command line (default is valueof `inferior-lisp-program'). Runs the hooks from`inferior-lisp-mode-hook' (after the `comint-mode-hook' is run).\(Type \\[describe-mode] in the process buffer for a list of commands.)" (interactive (list (if current-prefix-arg (read-string "Run lisp: " inferior-lisp-program) inferior-lisp-program))) (if (not (comint-check-proc "*inferior-lisp*")) (let ((cmdlist (split-string cmd))) (set-buffer (apply (function make-comint) "inferior-lisp" (car cmdlist) nil (cdr cmdlist))) (inferior-lisp-mode))) (setq inferior-lisp-buffer "*inferior-lisp*") (pop-to-buffer "*inferior-lisp*"));;;###autoload (add-hook 'same-window-buffer-names (purecopy "*inferior-lisp*"));;;###autoload(defalias 'run-lisp 'inferior-lisp)(defun lisp-eval-region (start end &optional and-go) "Send the current region to the inferior Lisp process.Prefix argument means switch to the Lisp buffer afterwards." (interactive "r\nP") (comint-send-region (inferior-lisp-proc) start end) (comint-send-string (inferior-lisp-proc) "\n") (if and-go (switch-to-lisp t)))(defun lisp-compile-string (string) "Send the string to the inferior Lisp process to be compiled and executed." (comint-send-string (inferior-lisp-proc) (format "(funcall (compile nil (lambda () %s)))\n" string)))(defun lisp-eval-string (string) "Send the string to the inferior Lisp process to be executed." (comint-send-string (inferior-lisp-proc) (concat string "\n")))(defun lisp-do-defun (do-string do-region) "Send the current defun to the inferior Lisp process.The actually processing is done by `do-string' and `do-region' which determine whether the code is compiled before evaluation.DEFVAR forms reset the variables to the init values." (save-excursion (end-of-defun) (skip-chars-backward " \t\n\r\f") ; Makes allegro happy (let ((end (point)) (case-fold-search t)) (beginning-of-defun) (if (looking-at "(defvar") (funcall do-string ;; replace `defvar' with `defparameter' (concat "(defparameter " (buffer-substring-no-properties (+ (point) 7) end) "\n")) (funcall do-region (point) end)))))(defun lisp-eval-defun (&optional and-go) "Send the current defun to the inferior Lisp process.DEFVAR forms reset the variables to the init values.Prefix argument means switch to the Lisp buffer afterwards." (interactive "P") (lisp-do-defun 'lisp-eval-string 'lisp-eval-region) (if and-go (switch-to-lisp t)))(defun lisp-eval-last-sexp (&optional and-go) "Send the previous sexp to the inferior Lisp process.Prefix argument means switch to the Lisp buffer afterwards." (interactive "P") (lisp-eval-region (save-excursion (backward-sexp) (point)) (point) and-go))(defun lisp-compile-region (start end &optional and-go) "Compile the current region in the inferior Lisp process.Prefix argument means switch to the Lisp buffer afterwards." (interactive "r\nP") (lisp-compile-string (buffer-substring-no-properties start end)) (if and-go (switch-to-lisp t)))(defun lisp-compile-defun (&optional and-go) "Compile the current defun in the inferior Lisp process.DEFVAR forms reset the variables to the init values.Prefix argument means switch to the Lisp buffer afterwards." (interactive "P") (lisp-do-defun 'lisp-compile-string 'lisp-compile-region) (if and-go (switch-to-lisp t)))(defun switch-to-lisp (eob-p) "Switch to the inferior Lisp process buffer.With argument, positions cursor at end of buffer." (interactive "P") (if (get-buffer-process inferior-lisp-buffer) (let ((pop-up-frames ;; Be willing to use another frame ;; that already has the window in it. (or pop-up-frames (get-buffer-window inferior-lisp-buffer t)))) (pop-to-buffer inferior-lisp-buffer)) (run-lisp inferior-lisp-program)) (when eob-p (push-mark) (goto-char (point-max))));;; Now that lisp-compile/eval-defun/region takes an optional prefix arg,;;; these commands are redundant. But they are kept around for the user;;; to bind if he wishes, for backwards functionality, and because it's;;; easier to type C-c e than C-u C-c C-e.(defun lisp-eval-region-and-go (start end) "Send the current region to the inferior Lisp, and switch to its buffer." (interactive "r") (lisp-eval-region start end t))(defun lisp-eval-defun-and-go () "Send the current defun to the inferior Lisp, and switch to its buffer." (interactive) (lisp-eval-defun t))(defun lisp-compile-region-and-go (start end) "Compile the current region in the inferior Lisp, and switch to its buffer." (interactive "r") (lisp-compile-region start end t))(defun lisp-compile-defun-and-go () "Compile the current defun in the inferior Lisp, and switch to its buffer." (interactive) (lisp-compile-defun t));;; A version of the form in H. Shevis' soar-mode.el package. Less robust.;;; (defun lisp-compile-sexp (start end);;; "Compile the s-expression bounded by START and END in the inferior lisp.;;; If the sexp isn't a DEFUN form, it is evaluated instead.";;; (cond ((looking-at "(defun\\s +");;; (goto-char (match-end 0));;; (let ((name-start (point)));;; (forward-sexp 1);;; (process-send-string "inferior-lisp";;; (format "(compile '%s #'(lambda ";;; (buffer-substring name-start;;; (point)))));;; (let ((body-start (point)));;; (goto-char start) (forward-sexp 1) ; Can't use end-of-defun.;;; (process-send-region "inferior-lisp";;; (buffer-substring body-start (point))));;; (process-send-string "inferior-lisp" ")\n"));;; (t (lisp-eval-region start end)))));;;;;; (defun lisp-compile-region (start end);;; "Each s-expression in the current region is compiled (if a DEFUN);;; or evaluated (if not) in the inferior lisp.";;; (interactive "r");;; (save-excursion;;; (goto-char start) (end-of-defun) (beginning-of-defun) ; error check;;; (if (< (point) start) (error "region begins in middle of defun"));;; (goto-char start);;; (let ((s start));;; (end-of-defun);;; (while (<= (point) end) ; Zip through;;; (lisp-compile-sexp s (point)) ; compiling up defun-sized chunks.;;; (setq s (point));;; (end-of-defun));;; (if (< s end) (lisp-compile-sexp s end)))));;;;;; End of HS-style code(defvar lisp-prev-l/c-dir/file nil "Record last directory and file used in loading or compiling.This holds a cons cell of the form `(DIRECTORY . FILE)'describing the last `lisp-load-file' or `lisp-compile-file' command.")(defcustom lisp-source-modes '(lisp-mode) "*Used to determine if a buffer contains Lisp source code.If it's loaded into a buffer that is in one of these major modes, it'sconsidered a Lisp source file by `lisp-load-file' and `lisp-compile-file'.Used by these commands to determine defaults." :type '(repeat symbol) :group 'inferior-lisp)(defun lisp-load-file (file-name) "Load a Lisp file into the inferior Lisp process." (interactive (comint-get-source "Load Lisp file: " lisp-prev-l/c-dir/file lisp-source-modes nil)) ; nil because LOAD ; doesn't need an exact name (comint-check-source file-name) ; Check to see if buffer needs saved. (setq lisp-prev-l/c-dir/file (cons (file-name-directory file-name) (file-name-nondirectory file-name))) (comint-send-string (inferior-lisp-proc) (format inferior-lisp-load-command file-name)) (switch-to-lisp t))(defun lisp-compile-file (file-name) "Compile a Lisp file in the inferior Lisp process." (interactive (comint-get-source "Compile Lisp file: " lisp-prev-l/c-dir/file lisp-source-modes nil)) ; nil = don't need ; suffix .lisp (comint-check-source file-name) ; Check to see if buffer needs saved. (setq lisp-prev-l/c-dir/file (cons (file-name-directory file-name) (file-name-nondirectory file-name))) (comint-send-string (inferior-lisp-proc) (concat "(compile-file \"" file-name "\"\)\n")) (switch-to-lisp t));;; Documentation functions: function doc, var doc, arglist, and;;; describe symbol.;;; ===========================================================================;;; Command strings;;; ===============(defvar lisp-function-doc-command "(let ((fn '%s)) (format t \"Documentation for ~a:~&~a\" fn (documentation fn 'function)) (values))\n" "Command to query inferior Lisp for a function's documentation.")(defvar lisp-var-doc-command "(let ((v '%s)) (format t \"Documentation for ~a:~&~a\" v (documentation v 'variable)) (values))\n" "Command to query inferior Lisp for a variable's documentation.")(defvar lisp-arglist-command "(let ((fn '%s)) (format t \"Arglist for ~a: ~a\" fn (arglist fn)) (values))\n" "Command to query inferior Lisp for a function's arglist.")(defvar lisp-describe-sym-command "(describe '%s)\n" "Command to query inferior Lisp for a variable's documentation.");;; Ancillary functions;;; ===================;;; Reads a string from the user.(defun lisp-symprompt (prompt default) (list (let* ((prompt (if default (format "%s (default %s): " prompt default) (concat prompt ": "))) (ans (read-string prompt))) (if (zerop (length ans)) default ans))));;; Adapted from function-called-at-point in help.el.(defun lisp-fn-called-at-pt () "Returns the name of the function called in the current call.The value is nil if it can't find one." (condition-case nil (save-excursion (save-restriction (narrow-to-region (max (point-min) (- (point) 1000)) (point-max)) (backward-up-list 1) (forward-char 1) (let ((obj (read (current-buffer)))) (and (symbolp obj) obj)))) (error nil)));;; Adapted from variable-at-point in help.el.(defun lisp-var-at-pt () (condition-case () (save-excursion (forward-sexp -1) (skip-chars-forward "'") (let ((obj (read (current-buffer)))) (and (symbolp obj) obj))) (error nil)));;; Documentation functions: fn and var doc, arglist, and symbol describe.;;; ======================================================================(defun lisp-show-function-documentation (fn) "Send a command to the inferior Lisp to give documentation for function FN.See variable `lisp-function-doc-command'." (interactive (lisp-symprompt "Function doc" (lisp-fn-called-at-pt))) (comint-proc-query (inferior-lisp-proc) (format lisp-function-doc-command fn)))(defun lisp-show-variable-documentation (var) "Send a command to the inferior Lisp to give documentation for function FN.See variable `lisp-var-doc-command'." (interactive (lisp-symprompt "Variable doc" (lisp-var-at-pt))) (comint-proc-query (inferior-lisp-proc) (format lisp-var-doc-command var)))(defun lisp-show-arglist (fn) "Send a query to the inferior Lisp for the arglist for function FN.See variable `lisp-arglist-command'." (interactive (lisp-symprompt "Arglist" (lisp-fn-called-at-pt))) (comint-proc-query (inferior-lisp-proc) (format lisp-arglist-command fn)))(defun lisp-describe-sym (sym) "Send a command to the inferior Lisp to describe symbol SYM.See variable `lisp-describe-sym-command'." (interactive (lisp-symprompt "Describe" (lisp-var-at-pt))) (comint-proc-query (inferior-lisp-proc) (format lisp-describe-sym-command sym)));; "Returns the current inferior Lisp process.;; See variable `inferior-lisp-buffer'."(defun inferior-lisp-proc () (let ((proc (get-buffer-process (if (eq major-mode 'inferior-lisp-mode) (current-buffer) inferior-lisp-buffer)))) (or proc (error "No Lisp subprocess; see variable `inferior-lisp-buffer'"))));;; Do the user's customisation...;;;===============================(defvar inferior-lisp-load-hook nil "This hook is run when the library `inf-lisp' is loaded.")(run-hooks 'inferior-lisp-load-hook);;; CHANGE LOG;;; ===========================================================================;;; 7/21/92 Jim Blandy;;; - Changed all uses of the cmulisp name or prefix to inferior-lisp;;;; this is now the official inferior lisp package. Use the global;;; ChangeLog from now on.;;; 5/24/90 Olin;;; - Split cmulisp and cmushell modes into separate files.;;; Not only is this a good idea, it's apparently the way it'll be rel 19.;;; - Upgraded process sends to use comint-send-string instead of;;; process-send-string.;;; - Explicit references to process "cmulisp" have been replaced with;;; (cmulisp-proc). This allows better handling of multiple process bufs.;;; - Added process query and var/function/symbol documentation;;; commands. Based on code written by Douglas Roberts.;;; - Added lisp-eval-last-sexp, bound to C-x C-e.;;;;;; 9/20/90 Olin;;; Added a save-restriction to lisp-fn-called-at-pt. This bug and fix;;; reported by Lennart Staflin.;;;;;; 3/12/90 Olin;;; - lisp-load-file and lisp-compile-file no longer switch-to-lisp.;;; Tale suggested this.;;; - Reversed this decision 7/15/91. You need the visual feedback.;;;;;; 7/25/91 Olin;;; Changed all keybindings of the form C-c <letter>. These are;;; supposed to be reserved for the user to bind. This affected;;; mainly the compile/eval-defun/region[-and-go] commands.;;; This was painful, but necessary to adhere to the gnumacs standard.;;; For some backwards compatibility, see the;;; cmulisp-install-letter-bindings;;; function.;;;;;; 8/2/91 Olin;;; - The lisp-compile/eval-defun/region commands now take a prefix arg,;;; which means switch-to-lisp after sending the text to the Lisp process.;;; This obsoletes all the -and-go commands. The -and-go commands are;;; kept around for historical reasons, and because the user can bind;;; them to key sequences shorter than C-u C-c C-<letter>.;;; - If M-x cmulisp is invoked with a prefix arg, it allows you to;;; edit the command line.(provide 'inf-lisp);; arch-tag: 5b74abc3-a085-4b91-8ab8-8da6899d3b92;;; inf-lisp.el ends here