view lib-src/b2m.pl @ 87595:4c6c79916238

* configure.in: Remove references to unsupported systems. * notes/copyright: * MAINTAINERS: Remove references to files that have been removed. * os.texi (System Environment): Remove references to OSes that are not supported anymore. * PROBLEMS: * MACHINES: Remove references to systems not supported anymore. * makefile.w32-in: * Makefile.in: Remove references to Xenix. * gnus.el (gnus-use-long-file-name): Remove reference to xenix. * obsolete/x-apollo.el: Remove file for unsupported system. * term/x-win.el (vendor-specific-keysyms): Remove reference to Apollo. * progmodes/gud.el (gud-dgux-p): Remove. (dbx): Remove reference to dgux. * progmodes/ps-mode.el (ps-mode-print-function): * ps-print.el (ps-lp-system): * paths.el (rmail-spool-directory): * ls-lisp.el (ls-lisp-emulation): * lpr.el (lpr-lp-system): * dired.el (dired-chown-program): Remove references to dgux. * m/7300.h: * m/acorn.h: * m/alliant-2800.h: * m/alliant.h: * m/alliant1.h: * m/alliant4.h: * m/altos.h: * m/amdahl.h: * m/apollo.h: * m/att3b.h: * m/aviion-intel.h: * m/aviion.h: * m/celerity.h: * m/clipper.h: * m/cnvrgnt.h: * m/convex.h: * m/cydra5.h: * m/delta88k.h: * m/dpx2.h: * m/dual.h: * m/elxsi.h: * m/f301.h: * m/gould-np1.h: * m/gould.h: * m/i860.h: * m/ibmps2-aix.h: * m/ibmrt-aix.h: * m/ibmrt.h: * m/irist.h: * m/is386.h: * m/isi-ov.h: * m/mega68.h: * m/mg1.h: * m/news-r6.h: * m/news-risc.h: * m/news.h: * m/nh3000.h: * m/nh4000.h: * m/ns16000.h: * m/ns32000.h: * m/nu.h: * m/orion.h: * m/orion105.h: * m/paragon.h: * m/pfa50.h: * m/plexus.h: * m/pyramid.h: * m/pyrmips.h: * m/sh3el.h: * m/sps7.h: * m/sr2k.h: * m/stride.h: * m/sun1.h: * m/sun2.h: * m/sun3-68881.h: * m/sun3-fpa.h: * m/sun3-soft.h: * m/sun3.h: * m/sun386.h: * m/symmetry.h: * m/tad68k.h: * m/tahoe.h: * m/targon31.h: * m/tek4300.h: * m/tekxd88.h: * m/tower32.h: * m/tower32v3.h: * m/ustation.h: * m/wicat.h: * m/xps100.h: * s/cxux.h: * s/cxux7.h: * s/dgux.h: * s/dgux4.h: * s/dgux5-4-3.h: * s/dgux5-4r2.h: * s/esix.h: * s/esix5r4.h: * s/hiuxmpp.h: * s/hiuxwe2.h: * s/iris3-5.h: * s/iris3-6.h: * s/isc2-2.h: * s/isc3-0.h: * s/isc4-0.h: * s/isc4-1.h: * s/newsos5.h: * s/newsos6.h: * s/osf1.h: * s/osf5-0.h: * s/riscix1-1.h: * s/riscix12.h: * s/sco4.h: * s/sco5.h: * s/sunos4-0.h: * s/sunos4-1.h: * s/sunos413.h: * s/sunos4shr.h: * s/umax.h: * s/unipl5-2.h: * s/xenix.h: * cxux-crt0.s: * unexapollo.c: * unexconvex.c: * unexenix.c: * unexsni.c: Remove files for systems no longer supported. * m/intel386.h: Remove references to unsupported systems. * w32.c (get_emacs_configuration): Remove reference to i860. * sysdep.c: Remove dead code.
author Dan Nicolaescu <dann@ics.uci.edu>
date Sun, 06 Jan 2008 00:56:56 +0000
parents 1f2482de3237
children 5714ff101fd9 f55f9811f5d7
line wrap: on
line source

#!/usr/bin/perl

# b2m.pl - Script to convert a Babyl file to an mbox file

# Copyright (C) 2002, 2003, 2004, 2005, 2006, 2007
#   Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3, or (at your option)
# any later version.

# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program; see the file COPYING.  If not, write to the
# Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
# Boston, MA 02110-1301 USA.

# Maintained by Jonathan Kamens <jik@kamens.brookline.ma.us>.

# Requires CPAN modules: MailTools (for Mail::Address), TimeDate (for
# Date::Parse).

use warnings;
use strict;
use File::Basename;
use Getopt::Long;
use Mail::Address;
use Date::Parse;

my($whoami) = basename $0;
my($version) = '$Revision$';
my($usage) = "Usage: $whoami [--help] [--version] [--[no]full-headers] [Babyl-file]
\tBy default, full headers are printed.\n";

my($opt_help, $opt_version);
my($opt_full_headers) = 1;

die $usage if (! GetOptions(
			    'help' => \$opt_help,
			    'version' => \$opt_version,
			    'full-headers!' => \$opt_full_headers,
			    ));

if ($opt_help) {
    print $usage;
    exit;
}
elsif ($opt_version) {
    print "$whoami version: $version\n";
    exit;
}

die $usage if (@ARGV > 1);

$/ = "\n\037";

if (<> !~ /^BABYL OPTIONS:/) {
    die "$whoami: $ARGV is not a Babyl file\n$usage";
}

while (<>) {
    my($msg_num) = $. - 1;
    my($labels, $pruned, $full_header, $header);
    my($from_line, $from_addr);
    my($time);

    # This will strip the initial form feed, any whitespace that may
    # be following it, and then a newline
    s/^\s+//;
    # This will strip the ^_ off of the end of the message
    s/\037$//;

    if (! s/(.*)\n//) {
      malformatted:
	warn "$whoami: message $msg_num in $ARGV is malformatted\n";
	next;
    }
    $labels = $1;

    # Strip the integer indicating whether the header is pruned
    $labels =~ s/^(\d+)[,\s]*//;
    $pruned = $1;

    s/(?:((?:.+\n)+)\n*)?\*\*\* EOOH \*\*\*\n+// || goto malformatted;
    $full_header = $1;

    if (s/((?:.+\n)+)\n+//) {
	$header = $1;
    }
    else {
	# Message has no body
	$header = $_;
	$_ = '';
    }

    # "$pruned eq '0'" is different from "! $pruned".  We want to make
    # sure that we found a valid label line which explicitly indicated
    # that the header was not pruned.
    if ((! $full_header) || ($pruned eq '0')) {
	$full_header = $header;
    }

    # End message with two newlines (some mbox parsers require a blank
    # line before the next "From " line).
    s/\s+$/\n\n/;

    # Quote "^From "
    s/(^|\n)From /$1>From /g;

    # Strip extra commas and whitespace from the end
    $labels =~ s/[,\s]+$//;
    # Now collapse extra commas and whitespace in the remaining label string
    $labels =~ s/[,\s]+/, /g;

    foreach my $rmail_header qw(summary-line x-coding-system) {
	$full_header =~ s/(^|\n)$rmail_header:.*\n/$1/i;
    }

    if ($full_header =~ s/(^|\n)mail-from:\s*(From .*)\n/$1/i) {
	($from_line = $2) =~ s/\s*$/\n/;
    }
    else {
	foreach my $addr_header qw(return-path from really-from sender) {
	    if ($full_header =~ /(?:^|\n)$addr_header:\s*(.*\n(?:\B.*\n)*)/i) {
		my($addr) = Mail::Address->parse($1);
		$from_addr = $addr->address($addr);
		last;
	    }
	}

	if (! $from_addr) {
	    $from_addr = "Babyl_to_mail_by_$whoami\@localhost";
	}

	if ($full_header =~ /(?:^|\n)date:\s*(\S.*\S)/i) {
	    $time = str2time($1);
	}

	if (! $time) {
	    # No Date header or we failed to parse it
	    $time = time;
	}

	$from_line = "From " . $from_addr . " " . localtime($time) . "\n";
    }

    print($from_line, ($opt_full_headers ? $full_header : $header),
	  ($labels ? "X-Babyl-Labels: $labels\n" : ""), "\n",
	  $_) || die "$whoami: error writing to stdout: $!\n";
}

close(STDOUT) || die "$whoami: Error closing stdout: $!\n";

# arch-tag: 8c7c8ab0-721c-46d7-ba3e-139801240aa8