Mercurial > emacs
view config.bat @ 89943:4c90ffeb71c5
Revision: miles@gnu.org--gnu-2004/emacs--unicode--0--patch-15
Merge from emacs--cvs-trunk--0
Patches applied:
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-218
- miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-220
Update from CVS
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-221
Restore deleted tagline in etc/TUTORIAL.ru
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-222
- miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-228
Update from CVS
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-229
Remove TeX output files from the archive
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-230
- miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-247
Update from CVS
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-248
src/lisp.h (CYCLE_CHECK): Macro moved from xfaces.c
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-249
- miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-256
Update from CVS
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-258
- miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-263
Update from CVS
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-264
Update from CVS: lispref/display.texi: emacs -> Emacs.
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-265
- miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-274
Update from CVS
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-275
Update from CVS: man/makefile.w32-in: Revert last change
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-276
- miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-295
Update from CVS
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-296
Allow restarting an existing debugger session that's exited
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-297
- miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-299
Update from CVS
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-300
- miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-327
Update from CVS
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-328
Update from CVS: src/.gdbinit (xsymbol): Fix last change.
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-329
- miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-344
Update from CVS
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-345
Tweak source regexps so that building in place won't cause problems
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-346
- miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-351
Update from CVS
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-352
Update from CVS: lisp/flymake.el: New file.
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-353
- miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-361
Update from CVS
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-362
Support " [...]" style defaults in minibuffer-electric-default-mode
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-363
(read-number): Use canonical format for default in prompt.
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-364
- miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-367
Update from CVS
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-368
Improve display-supports-face-attributes-p on non-ttys
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-369
Rewrite face-differs-from-default-p
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-370
Move `display-supports-face-attributes-p' entirely into C code
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-371
Update from CVS
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-372
Simplify face-differs-from-default-p; don't consider :stipple.
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-373
Update from CVS
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-374
(tty_supports_face_attributes_p): Ensure attributes differ from default
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-375
- miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-376
Update from CVS
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-377
(Fdisplay_supports_face_attributes_p): Work around bootstrapping problem
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-378
- miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-380
Update from CVS
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-381
Face merging cleanups
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-382
- miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-384
Update from CVS
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-385
src/xfaces.c (push_named_merge_point): Return 0 if a cycle is detected
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-386
- miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-395
Update from CVS
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-396
Tweak arch tagging to make build/install-in-place less annoying
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-397
Work around vc-arch problems when building eshell
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-398
Tweak permissions
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-399
Tweak directory permissions
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-400
Update from CVS
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-401
More build-in-place tweaking of arch tagging
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-402
Update from CVS
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-403
Yet more build-in-place tweaking of arch tagging
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-404
- miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-409
Update from CVS
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-410
Make sure image types are initialized for lookup too
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-411
- miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-416
Update from CVS
author | Miles Bader <miles@gnu.org> |
---|---|
date | Mon, 28 Jun 2004 07:56:49 +0000 |
parents | 68c22ea6027c |
children | 0bdb5a16ae51 |
line wrap: on
line source
@echo off rem ---------------------------------------------------------------------- rem Configuration script for MSDOS rem Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2001, 2004 rem Free Software Foundation, Inc. rem This file is part of GNU Emacs. rem GNU Emacs is free software; you can redistribute it and/or modify rem it under the terms of the GNU General Public License as published by rem the Free Software Foundation; either version 2, or (at your option) rem any later version. rem GNU Emacs is distributed in the hope that it will be useful, rem but WITHOUT ANY WARRANTY; without even the implied warranty of rem MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the rem GNU General Public License for more details. rem You should have received a copy of the GNU General Public License rem along with GNU Emacs; see the file COPYING. If not, write to the rem Free Software Foundation, Inc., 59 Temple Place - Suite 330, rem Boston, MA 02111-1307, USA. rem ---------------------------------------------------------------------- rem YOU'LL NEED THE FOLLOWING UTILITIES TO MAKE EMACS: rem rem + msdos version 3 or better. rem + djgpp version 1.12maint1 or later (version 2.0 or later recommended). rem + make utility that allows breaking of the 128 chars limit on rem command lines. ndmake (as of version 4.5) won't work due to a rem line length limit. The make that comes with djgpp does work. rem + rm and mv (from GNU file utilities). rem + sed (you can use the port that comes with DJGPP). rem rem You should be able to get all the above utilities from any SimTel rem repository, e.g. ftp.simtel.net, in the directory rem "pub/simtelnet/gnu/djgpp/v2gnu". As usual, please use your local rem mirroring site to reduce trans-Atlantic traffic. rem ---------------------------------------------------------------------- set X11= set nodebug= set djgpp_ver= if "%1" == "" goto usage rem ---------------------------------------------------------------------- rem See if their environment is large enough. We need 28 bytes. set $foo$=789012345678901234567 if not "%$foo$%" == "789012345678901234567" goto SmallEnv set $foo$= :again if "%1" == "" goto usage if "%1" == "--with-x" goto withx if "%1" == "--no-debug" goto nodebug if "%1" == "msdos" goto msdos :usage echo Usage: config [--with-x] [--no-debug] msdos echo [Read the script before you run it.] goto end rem ---------------------------------------------------------------------- :withx set X11=Y shift goto again rem ---------------------------------------------------------------------- :nodebug set nodebug=Y shift goto again rem ---------------------------------------------------------------------- :msdos Echo Checking whether 'sed' is available... sed -e "w junk.$$$" <Nul If Exist junk.$$$ Goto sedOk Echo To configure 'Emacs' you need to have 'sed'! Goto End :sedOk Echo Checking whether 'rm' is available... rm -f junk.$$$ If Not Exist junk.$$$ Goto rmOk Echo To configure 'Emacs' you need to have 'rm'! Goto End :rmOk Echo Checking whether 'mv' is available... rm -f junk.1 junk.2 echo foo >junk.1 mv junk.1 ./junk.2 If Exist junk.2 Goto mvOk Echo To configure 'Emacs' you need to have 'mv'! rm -f junk.1 Goto End :mvOk rm -f junk.2 Echo Checking whether 'gcc' is available... echo main(){} >junk.c gcc -c junk.c if exist junk.o goto gccOk Echo To configure 'Emacs' you need to have 'gcc'! rm -f junk.c Goto End :gccOk rm -f junk.c junk.o junk junk.exe Echo Checking what version of DJGPP is installed... If Not "%DJGPP%" == "" goto djgppOk Echo To compile 'Emacs' under MS-DOS you MUST have DJGPP installed! Goto End :djgppOk echo int main() >junk.c echo #ifdef __DJGPP__ >>junk.c echo {return (__DJGPP__)*10;} >>junk.c echo #else >>junk.c echo #ifdef __GO32__ >>junk.c echo {return 10;} >>junk.c echo #else >>junk.c echo {return 0;} >>junk.c echo #endif >>junk.c echo #endif >>junk.c gcc -o junk junk.c if not exist junk.exe coff2exe junk junk If ErrorLevel 10 Goto go32Ok rm -f junk.c junk junk.exe Echo To compile 'Emacs' under MS-DOS you MUST have DJGPP installed! Goto End :go32Ok set djgpp_ver=1 If ErrorLevel 20 set djgpp_ver=2 rm -f junk.c junk junk.exe rem DJECHO is used by the top-level Makefile Echo Checking whether 'djecho' is available... redir -o Nul -eo djecho -o junk.$$$ foo If Exist junk.$$$ Goto djechoOk Echo To build 'Emacs' you need the 'djecho.exe' program! Echo 'djecho.exe' is part of 'djdevNNN.zip' basic DJGPP development kit. Echo Versions of DJGPP before 2.02 called this program 'echo.exe'. Echo Either unpack 'djecho.exe' from the 'djdevNNN.zip' archive, Echo or, if you have 'echo.exe', copy it to 'djecho.exe'. Echo Then run CONFIG.BAT again with the same arguments you did now. Goto End :djechoOk rm -f junk.$$$ Echo Configuring for DJGPP Version %DJGPP_VER% ... Rem ---------------------------------------------------------------------- Echo Configuring the source directory... cd src rem Create "epaths.h" sed -f ../msdos/sed4.inp <epaths.in >epaths.tmp update epaths.tmp epaths.h >nul rm -f epaths.tmp rem Create "config.h" rm -f config.h2 config.tmp sed -e '' config.in > config.tmp if "%X11%" == "" goto src4 sed -f ../msdos/sed2x.inp <config.in >config.tmp :src4 if "%DJGPP_VER%" == "2" Goto src41 sed -f ../msdos/sed2.inp <config.tmp >config.h2 goto src42 :src41 sed -f ../msdos/sed2v2.inp <config.tmp >config.h2 :src42 update config.h2 config.h >nul rm -f config.tmp config.h2 rem On my system dir.h gets in the way. It's a VMS file so who cares. if exist dir.h ren dir.h vmsdir.h rem Create "makefile" from "makefile.in". rm -f Makefile junk.c sed -e "1,/== start of cpp stuff ==/s@^# .*$@@" <Makefile.in >junk.c If "%DJGPP_VER%" == "1" Goto mfV1 gcc -E -traditional junk.c | sed -f ../msdos/sed1v2.inp >Makefile goto mfDone :mfV1 gcc -E -traditional junk.c | sed -f ../msdos/sed1.inp >Makefile :mfDone rm -f junk.c if "%X11%" == "" goto src5 mv Makefile makefile.tmp sed -f ../msdos/sed1x.inp <makefile.tmp >Makefile rm -f makefile.tmp :src5 if "%nodebug%" == "" goto src6 sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp sed -e "/^LDFLAGS *=/s/=/=-s/" <makefile.tmp >Makefile rm -f makefile.tmp :src6 cd .. rem ---------------------------------------------------------------------- Echo Configuring the library source directory... cd lib-src rem Create "makefile" from "makefile.in". sed -e "1,/== start of cpp stuff ==/s@^#[ ].*$@@" <Makefile.in >junk.c gcc -E -traditional -I. -I../src junk.c | sed -e "s/^ / /" -e "/^#/d" -e "/^[ ]*$/d" >makefile.new If "%DJGPP_VER%" == "2" goto libsrc-v2 sed -f ../msdos/sed3.inp <makefile.new >Makefile Goto libsrc2 :libsrc-v2 sed -f ../msdos/sed3v2.inp <makefile.new >Makefile :libsrc2 rm -f makefile.new junk.c if "%nodebug%" == "" goto libsrc3 sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp sed -e "/^ALL_CFLAGS *=/s/=/= -s/" <makefile.tmp >Makefile rm -f makefile.tmp :libsrc3 cd .. rem ---------------------------------------------------------------------- if "%X11%" == "" goto oldx1 Echo Configuring the oldxmenu directory... cd oldxmenu sed -f ../msdos/sed5x.inp <Makefile.in >Makefile if "%nodebug%" == "" goto oldx2 sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp mv -f makefile.tmp Makefile :oldx2 cd .. :oldx1 rem ---------------------------------------------------------------------- Echo Configuring the manual directory... cd man sed -f ../msdos/sed6.inp < Makefile.in > Makefile cd .. rem ---------------------------------------------------------------------- Echo Configuring the ELisp manual directory... cd lispref sed -f ../msdos/sed6.inp < Makefile.in > Makefile cd .. rem ---------------------------------------------------------------------- Echo Configuring the ELisp Introduction manual directory... Rem The two variants for the line below is for when the shell Rem supports long file names but DJGPP does not if exist lispintro\Makefile.in cd lispintro if exist lispintr\Makefile.in cd lispintr sed -f ../msdos/sed6.inp < Makefile.in > Makefile cd .. rem ---------------------------------------------------------------------- Echo Configuring the lisp directory... cd lisp sed -f ../msdos/sedlisp.inp < Makefile.in > Makefile cd .. rem ---------------------------------------------------------------------- If not Exist leim\quail\latin-pre.el goto maindir Echo Configuring the leim directory... cd leim sed -f ../msdos/sedleim.inp < Makefile.in > Makefile cd .. rem ---------------------------------------------------------------------- :maindir Echo Configuring the main directory... If "%DJGPP_VER%" == "1" goto mainv1 Echo Looking for the GDB init file... If Exist src\.gdbinit update src/.gdbinit src/_gdbinit If Exist src\_gdbinit goto gdbinitOk Echo ERROR: Echo I cannot find the GDB init file. It was called ".gdbinit" in Echo the Emacs distribution, but was probably renamed to some other Echo name without the leading dot when you untarred the archive. Echo It should be in the "src/" subdirectory. Please make sure this Echo file exists and is called "_gdbinit" with a leading underscore. Echo Then run CONFIG.BAT again with the same arguments you did now. goto End :gdbinitOk Echo Looking for the GDB init file...found copy msdos\mainmake.v2 Makefile >nul :mainv1 If "%DJGPP_VER%" == "1" copy msdos\mainmake Makefile >nul rem ---------------------------------------------------------------------- goto End :SmallEnv echo Your environment size is too small. Please enlarge it and run me again. echo For example, type "command.com /e:2048" to have 2048 bytes available. set $foo$= :end set X11= set nodebug= set djgpp_ver= goto skipArchTag arch-tag: 2d2fed23-4dc6-4006-a2e4-49daf0031f33 :skipArchTag