view man/display.texi @ 36547:4dff107cf2a1

(Reverting): Add an index entry "reread a file".

@c This is part of the Emacs manual.
@c Copyright (C) 1985, 86, 87, 93, 94, 95, 1997, 2000 Free Software Foundation, Inc.
@c See file emacs.texi for copying conditions.
@node Display, Search, Registers, Top
@chapter Controlling the Display

  Since only part of a large buffer fits in the window, Emacs tries to
show a part that is likely to be interesting.  Display-control commands
allow you to specify which part of the text you want to see, and how to
display it.

@menu
* Scrolling::	           Moving text up and down in a window.
* Horizontal Scrolling::   Moving text left and right in a window.
* Follow Mode::            Follow mode lets two windows scroll as one.
* Selective Display::      Hiding lines with lots of indentation.
* Optional Mode Line::     Optional mode line display features.
* Text Display::           How text characters are normally displayed.
* Display Custom::         Information on variables for customizing display.
* Cursor Display::         Features for displaying the cursor.
@end menu

@node Scrolling
@section Scrolling

  If a buffer contains text that is too large to fit entirely within a
window that is displaying the buffer, Emacs shows a contiguous portion of
the text.  The portion shown always contains point.

@cindex scrolling
  @dfn{Scrolling} means moving text up or down in the window so that
different parts of the text are visible.  Scrolling forward means that text
moves up, and new text appears at the bottom.  Scrolling backward moves
text down and new text appears at the top.

  Scrolling happens automatically if you move point past the bottom or top
of the window.  You can also explicitly request scrolling with the commands
in this section.

@table @kbd
@item C-l
Clear screen and redisplay, scrolling the selected window to center
point vertically within it (@code{recenter}).
@item C-v
Scroll forward (a windowful or a specified number of lines) (@code{scroll-up}).
@item @key{NEXT}
Likewise, scroll forward.
@item M-v
Scroll backward (@code{scroll-down}).
@item @key{PRIOR}
Likewise, scroll backward.
@item @var{arg} C-l
Scroll so point is on line @var{arg} (@code{recenter}).
@item C-M-l
Scroll heuristically to bring useful information onto the screen
(@code{reposition-window}).
@end table

@kindex C-l
@findex recenter
  The most basic scrolling command is @kbd{C-l} (@code{recenter}) with
no argument.  It clears the entire screen and redisplays all windows.
In addition, it scrolls the selected window so that point is halfway
down from the top of the window.

@kindex C-v
@kindex M-v
@kindex NEXT
@kindex PRIOR
@findex scroll-up
@findex scroll-down
  The scrolling commands @kbd{C-v} and @kbd{M-v} let you move all the text
in the window up or down a few lines.  @kbd{C-v} (@code{scroll-up}) with an
argument shows you that many more lines at the bottom of the window, moving
the text and point up together as @kbd{C-l} might.  @kbd{C-v} with a
negative argument shows you more lines at the top of the window.
@kbd{M-v} (@code{scroll-down}) is like @kbd{C-v}, but moves in the
opposite direction.  The function keys @key{NEXT} and @key{PRIOR} are
equivalent to @kbd{C-v} and @kbd{M-v}.

  The names of scroll commands are based on the direction that the text
moves in the window.  Thus, the command to scroll forward is called
@code{scroll-up} because it moves the text upward on the screen.

@vindex next-screen-context-lines
  To read the buffer a windowful at a time, use @kbd{C-v} with no argument.
It takes the last two lines at the bottom of the window and puts them at
the top, followed by nearly a whole windowful of lines not previously
visible.  If point was in the text scrolled off the top, it moves to the
new top of the window.  @kbd{M-v} with no argument moves backward with
overlap similarly.  The number of lines of overlap across a @kbd{C-v} or
@kbd{M-v} is controlled by the variable @code{next-screen-context-lines}; by
default, it is 2.

@vindex scroll-preserve-screen-position
  Some users like the full-screen scroll commands to keep point at the
same screen line.  To enable this behavior, set the variable
@code{scroll-preserve-screen-position} to a non-@code{nil} value.  This
mode is convenient for browsing through a file by scrolling by
screenfuls; if you come back to the screen where you started, point goes
back to the line where it started.  However, this mode is inconvenient
when you move to the next screen in order to move point to the text
there.

  Another way to do scrolling is with @kbd{C-l} with a numeric argument.
@kbd{C-l} does not clear the screen when given an argument; it only scrolls
the selected window.  With a positive argument @var{n}, it repositions text
to put point @var{n} lines down from the top.  An argument of zero puts
point on the very top line.  Point does not move with respect to the text;
rather, the text and point move rigidly on the screen.  @kbd{C-l} with a
negative argument puts point that many lines from the bottom of the window.
For example, @kbd{C-u - 1 C-l} puts point on the bottom line, and @kbd{C-u
- 5 C-l} puts it five lines from the bottom.  Just @kbd{C-u} as argument,
as in @kbd{C-u C-l}, scrolls point to the center of the selected window.

@kindex C-M-l
@findex reposition-window
  The @kbd{C-M-l} command (@code{reposition-window}) scrolls the current
window heuristically in a way designed to get useful information onto
the screen.  For example, in a Lisp file, this command tries to get the
entire current defun onto the screen if possible.

@vindex scroll-conservatively
  Scrolling happens automatically if point has moved out of the visible
portion of the text when it is time to display.  Normally, automatic
scrolling centers point vertically within the window.  However, if you
set @code{scroll-conservatively} to a small number @var{n}, then if you
move point just a little off the screen---less than @var{n} lines---then
Emacs scrolls the text just far enough to bring point back on screen.
By default, @code{scroll-conservatively} is 0.

@cindex aggressive scrolling
@vindex scroll-up-aggressively
@vindex scroll-down-aggressively 
  When the window does scroll by a longer distance, you can control
how aggressively it scrolls, by setting the variables
@code{scroll-up-aggressively} and @code{scroll-down-aggressively}.
The value of @code{scroll-up-aggressively} should be either
@code{nil}, or a fraction @var{f} between 0 and 1.  A fraction
specifies where on the screen to put point when scrolling upward.
More precisely, when a window scrolls up because point is above the
window start, the new start position is chosen to put point @var{f}
part of the window height from the top.  The larger @var{f}, the more
aggressive the scrolling.

  @code{nil}, which is the default, scrolls to put point at the center.
So it is equivalent to .5.

  Likewise, @code{scroll-down-aggressively} is used for scrolling
down.  The value, @var{f}, specifies how far point should be placed
from the bottom of the window; thus, as with
@code{scroll-up-aggressively}, a larger value is more aggressive.

@vindex scroll-margin
  The variable @code{scroll-margin} restricts how close point can come
to the top or bottom of a window.  Its value is a number of screen
lines; if point comes within that many lines of the top or bottom of the
window, Emacs recenters the window.  By default, @code{scroll-margin} is
0.

@node Horizontal Scrolling
@section Horizontal Scrolling
@cindex horizontal scrolling

  @dfn{Horizontal scrolling} means shifting all the lines sideways
within a window---so that some of the text near the left margin is not
displayed at all.  Emacs does this automatically, in any window that
uses line truncation rather than continuation: whenever point moves
off the left or right edge of the screen, Emacs scrolls the buffer
horizontally to make point visible.

  When a window has been scrolled horizontally, text lines are truncated
rather than continued (@pxref{Continuation Lines}), with a @samp{$}
appearing in the first column when there is text truncated to the left,
and in the last column when there is text truncated to the right.

  You can use these commands to do explicit horizontal scrolling.

@table @kbd
@item C-x <
Scroll text in current window to the left (@code{scroll-left}).
@item C-x >
Scroll to the right (@code{scroll-right}).
@end table

@kindex C-x <
@kindex C-x >
@findex scroll-left
@findex scroll-right
  The command @kbd{C-x <} (@code{scroll-left}) scrolls the selected
window to the left by @var{n} columns with argument @var{n}.  This moves
part of the beginning of each line off the left edge of the window.
With no argument, it scrolls by almost the full width of the window (two
columns less, to be precise).

  @kbd{C-x >} (@code{scroll-right}) scrolls similarly to the right.  The
window cannot be scrolled any farther to the right once it is displayed
normally (with each line starting at the window's left margin);
attempting to do so has no effect.  This means that you don't have to
calculate the argument precisely for @w{@kbd{C-x >}}; any sufficiently large
argument will restore the normal display.

  If you scroll a window horizontally by hand, that sets a lower bound
for automatic horizontal scrolling.  Automatic scrolling will continue
to scroll the window, but never further to the right than the amount
you previously set by @code{scroll-left}.

@vindex automatic-hscrolling
  To disable automatic horizontal scrolling, set the variable
@code{automatic-hscrolling} to @code{nil}.

@node Follow Mode
@section Follow Mode
@cindex Follow mode
@cindex mode, Follow
@findex follow-mode
@cindex windows, synchronizing
@cindex synchronizing windows

  @dfn{Follow mode} is a minor mode that makes two windows showing the
same buffer scroll as one tall ``virtual window.''  To use Follow mode,
go to a frame with just one window, split it into two side-by-side
windows using @kbd{C-x 3}, and then type @kbd{M-x follow-mode}.  From
then on, you can edit the buffer in either of the two windows, or scroll
either one; the other window follows it.

  In Follow mode, if you move point outside the portion visible in one
window and into the portion visible in the other window, that selects
the other window---again, treating the two as if they were parts of
one large window.

  To turn off Follow mode, type @kbd{M-x follow-mode} a second time.

@node Selective Display
@section Selective Display
@cindex selective display
@findex set-selective-display
@kindex C-x $

  Emacs has the ability to hide lines indented more than a certain number
of columns (you specify how many columns).  You can use this to get an
overview of a part of a program.

  To hide lines, type @kbd{C-x $} (@code{set-selective-display}) with a
numeric argument @var{n}.  Then lines with at least @var{n} columns of
indentation disappear from the screen.  The only indication of their
presence is that three dots (@samp{@dots{}}) appear at the end of each
visible line that is followed by one or more hidden ones.

  The commands @kbd{C-n} and @kbd{C-p} move across the hidden lines as
if they were not there.

  The hidden lines are still present in the buffer, and most editing
commands see them as usual, so you may find point in the middle of the
hidden text.  When this happens, the cursor appears at the end of the
previous line, after the three dots.  If point is at the end of the
visible line, before the newline that ends it, the cursor appears before
the three dots.

  To make all lines visible again, type @kbd{C-x $} with no argument.

@vindex selective-display-ellipses
  If you set the variable @code{selective-display-ellipses} to
@code{nil}, the three dots do not appear at the end of a line that
precedes hidden lines.  Then there is no visible indication of the
hidden lines.  This variable becomes local automatically when set.

@node Optional Mode Line
@section Optional Mode Line Features

@cindex line number display
@cindex display of line number
@findex line-number-mode
  The current line number of point appears in the mode line when Line
Number mode is enabled.  Use the command @kbd{M-x line-number-mode} to
turn this mode on and off; normally it is on.  The line number appears
before the buffer percentage @var{pos}, with the letter @samp{L} to
indicate what it is.  @xref{Minor Modes}, for more information about
minor modes and about how to use this command.

@vindex line-number-display-limit
  If the buffer is very large (larger than the value of
@code{line-number-display-limit}), then the line number doesn't appear.
Emacs doesn't compute the line number when the buffer is large, because
that would be too slow.  Set it to @code{nil} to remove the limit.  If
you have narrowed the buffer (@pxref{Narrowing}), the displayed line
number is relative to the accessible portion of the buffer.

@cindex Column Number mode
@cindex mode, Column Number
@findex column-number-mode
  You can also display the current column number by turning on Column
Number mode.  It displays the current column number preceded by the
letter @samp{C}.  Type @kbd{M-x column-number-mode} to toggle this mode.

@findex display-time
@cindex time (on mode line)
  Emacs can optionally display the time and system load in all mode
lines.  To enable this feature, type @kbd{M-x display-time} or customize
the option @code{display-time-mode}.  The information added to the mode
line usually appears after the buffer name, before the mode names and
their parentheses.  It looks like this:

@example
@var{hh}:@var{mm}pm @var{l.ll}
@end example

@noindent
@vindex display-time-24hr-format
Here @var{hh} and @var{mm} are the hour and minute, followed always by
@samp{am} or @samp{pm}.  @var{l.ll} is the average number of running
processes in the whole system recently.  (Some fields may be missing if
your operating system cannot support them.)  If you prefer time display
in 24-hour format, set the variable @code{display-time-24hr-format}
to @code{t}.

@cindex mail (on mode line)
@vindex display-time-use-mail-icon
@vindex display-time-mail-face
  The word @samp{Mail} appears after the load level if there is mail
for you that you have not read yet.  On a graphical display you can use
an icon instead of @samp{Mail} by customizing
@code{display-time-use-mail-icon}; this may save some space on the mode
line.  You can customize @code{display-time-mail-face} to make the mail
indicator prominent.

@cindex mode line, 3D appearence
@cindex attributes of mode line, changing
@cindex non-integral number of lines in a window
  By default, the mode line is drawn on graphics displays as a 3D
released button.  Depending on the font used for the mode line's text,
this might make the mode line use more space than a text line in a
window, and cause the last line of the window be partially obscured.
That is, the window displays a non-integral number of text lines.  If
you don't like this effect, you can disable the 3D appearence of the
mode line by customizing the attributes of the @code{mode-line} face in
your @file{.emacs} init file, like this:

@example
 (set-face-attribute 'mode-line nil :box nil)
@end example

@noindent
Alternatively, you could turn off the box attribute in your
@file{.Xdefaults} file:

@example
 Emacs.mode-line.AttributeBox: off
@end example

@node Text Display
@section How Text Is Displayed
@cindex characters (in text)

  ASCII printing characters (octal codes 040 through 0176) in Emacs
buffers are displayed with their graphics.  So are non-ASCII multibyte
printing characters (octal codes above 0400).

  Some ASCII control characters are displayed in special ways.  The
newline character (octal code 012) is displayed by starting a new line.
The tab character (octal code 011) is displayed by moving to the next
tab stop column (normally every 8 columns).

  Other ASCII control characters are normally displayed as a caret
(@samp{^}) followed by the non-control version of the character; thus,
control-A is displayed as @samp{^A}.

  Non-ASCII characters 0200 through 0237 (octal) are displayed with
octal escape sequences; thus, character code 0230 (octal) is displayed
as @samp{\230}.  The display of character codes 0240 through 0377
(octal) may be either as escape sequences or as graphics.  They do not
normally occur in multibyte buffers but if they do, they are displayed
as Latin-1 graphics.  In unibyte mode, if you enable European display
they are displayed using their graphics (assuming your terminal supports
them), otherwise as escape sequences.  @xref{Single-Byte Character
Support}.

@node Display Custom
@section Customization of Display

  This section contains information for customization only.  Beginning
users should skip it.

@vindex mode-line-inverse-video
  The variable @code{mode-line-inverse-video} is an obsolete way of
controlling whether the mode line is displayed in inverse video; the
preferred way of doing this is to change the @code{mode-line} face.
@xref{Mode Line}.  If you specify the foreground color for the
@code{mode-line} face, and @code{mode-line-inverse-video} is
non-@code{nil}, then the default background color for that face is the
usual foreground color.  @xref{Faces}.

@vindex inverse-video
  If the variable @code{inverse-video} is non-@code{nil}, Emacs attempts
to invert all the lines of the display from what they normally are.

@vindex visible-bell
  If the variable @code{visible-bell} is non-@code{nil}, Emacs attempts
to make the whole screen blink when it would normally make an audible bell
sound.  This variable has no effect if your terminal does not have a way
to make the screen blink.@refill

@vindex no-redraw-on-reenter
  When you reenter Emacs after suspending, Emacs normally clears the
screen and redraws the entire display.  On some terminals with more than
one page of memory, it is possible to arrange the termcap entry so that
the @samp{ti} and @samp{te} strings (output to the terminal when Emacs
is entered and exited, respectively) switch between pages of memory so
as to use one page for Emacs and another page for other output.  Then
you might want to set the variable @code{no-redraw-on-reenter}
non-@code{nil}; this tells Emacs to assume, when resumed, that the
screen page it is using still contains what Emacs last wrote there.

@vindex echo-keystrokes
  The variable @code{echo-keystrokes} controls the echoing of multi-character
keys; its value is the number of seconds of pause required to cause echoing
to start, or zero meaning don't echo at all.  @xref{Echo Area}.

@vindex ctl-arrow
  If the variable @code{ctl-arrow} is @code{nil}, control characters in
the buffer are displayed with octal escape sequences, except for newline
and tab.  Altering the value of @code{ctl-arrow} makes it local to the
current buffer; until that time, the default value is in effect.  The
default is initially @code{t}.  @xref{Display Tables,, Display Tables,
elisp, The Emacs Lisp Reference Manual}.

@vindex tab-width
  Normally, a tab character in the buffer is displayed as whitespace which
extends to the next display tab stop position, and display tab stops come
at intervals equal to eight spaces.  The number of spaces per tab is
controlled by the variable @code{tab-width}, which is made local by
changing it, just like @code{ctl-arrow}.  Note that how the tab character
in the buffer is displayed has nothing to do with the definition of
@key{TAB} as a command.  The variable @code{tab-width} must have an
integer value between 1 and 1000, inclusive.

@c @vindex truncate-lines  @c No index entry here, because we have one
@c in the continuation section.
  If the variable @code{truncate-lines} is non-@code{nil}, then each
line of text gets just one screen line for display; if the text line is
too long, display shows only the part that fits.  If
@code{truncate-lines} is @code{nil}, then long text lines display as
more than one screen line, enough to show the whole text of the line.
@xref{Continuation Lines}.  Altering the value of @code{truncate-lines}
makes it local to the current buffer; until that time, the default value
is in effect.  The default is initially @code{nil}.

@c @vindex truncate-partial-width-windows  @c Idx entry is in Split Windows.
  If the variable @code{truncate-partial-width-windows} is
non-@code{nil}, it forces truncation rather than continuation in any
window less than the full width of the screen or frame, regardless of
the value of @code{truncate-lines}.  For information about side-by-side
windows, see @ref{Split Window}.  See also @ref{Display,, Display,
elisp, The Emacs Lisp Reference Manual}.

@vindex baud-rate
  The variable @code{baud-rate} holds the output speed of the
terminal, as far as Emacs knows.  Setting this variable does not
change the speed of actual data transmission, but the value is used
for calculations.  On terminals, it affects padding, and decisions
about whether to scroll part of the screen or redraw it instead.

  On window-systems, @code{baud-rate} is only used to determine how
frequently to look for pending input during display updating.  A
higher value of @code{baud-rate} means that check for pending input
will be done less frequently.

  You can customize the way any particular character code is displayed
by means of a display table.  @xref{Display Tables,, Display Tables,
elisp, The Emacs Lisp Reference Manual}.

@cindex hourglass pointer display
@vindex hourglass-delay
  On a window system, Emacs can optionally display the mouse pointer
in a special shape to say that Emacs is busy.  To turn this feature on
or off, customize the group @code{cursor}.  You can also control the
amount of time Emacs must remain busy before the busy indicator is
displayed, by setting the variable @code{hourglass-delay}.

@node Cursor Display
@section Displaying the Cursor

@findex hl-line-mode
@findex blink-cursor-mode
@cindex cursor, locating visually
@cindex cursor, blinking
  There are a number of ways to customize the display of the cursor.
@kbd{M-x hl-line-mode} enables or disables a global minor mode which
highlights the line containing point.  On window systems, the command
@kbd{M-x blink-cursor-mode} turns on or off the blinking of the
cursor.  (On terminals, the terminal itself blinks the cursor, and
Emacs has no control over it.)

  You can customize the cursor's color, and whether it blinks, using
the @code{cursor} Custom group (@pxref{Easy Customization}).

@vindex x-stretch-cursor
@cindex wide block cursor
  When displaying on a window system, Emacs can optionally draw the
block cursor as wide as the character under the cursor---for example,
if the cursor is on a tab character, it would cover the full width
occupied by that tab character.  To enable this feature, set the
variable @code{x-stretch-cursor} to a non-@code{nil} value.

@cindex cursor in non-selected windows
@vindex show-cursor-in-non-selected-windows
@vindex cursor-in-non-selected-windows
  Normally, the cursor in non-selected windows is shown as a hollow box.
To turn off cursor display in non-selected windows, customize the option
@code{show-cursor-in-non-selected-windows}, or set the variable
@code{cursor-in-non-selected-windows} to @code{nil}.