view src/casefiddle.c @ 107998:531d454c3a99

Implement GUI display of R2L lines, fix TTY display of R2L lines. xdisp.c [HAVE_WINDOW_SYSTEM]: Add prototype for append_stretch_glyph. (set_cursor_from_row) <cursor_x>: Remove unused variable. Fix off-by-one error in computing x at end of text in the row. (append_stretch_glyph): In reversed row, prepend the glyph rather than append it. Set resolved_level and bidi_type of the glyph. (extend_face_to_end_of_line): If the row is reversed, prepend a stretch glyph whose width is such that the rightmost glyph will be drawn at the right margin of the window. Fix off-by-one error on TTY frames in testing whether a line needs face extension. Fix face extension at ZV. If this is the last glyph row, use DEFAULT_FACE_ID, to avoid painting the rest of the window with the region face. (set_cursor_from_row, display_line): Use MATRIX_ROW_CONTINUATION_LINE_P instead of testing value of row->continuation_lines_width. (next_element_from_buffer): Don't call bidi_paragraph_init if we are at ZV. Fixes a crash when reseated to ZV by try_window_reusing_current_matrix. (display_and_set_cursor, erase_phys_cursor): Handle negative HPOS, which happens with R2L glyph rows. Fixes a crash when inserting a character at end of an R2L line. (set_cursor_from_row): Don't be fooled by truncated rows: don't treat them as having zero-width characters. Improve comments. Don't reverse pos_before and pos_after for reversed glyph rows. Set cursor.x to negative value when the cursor might be on the left fringe. (IT_OVERFLOW_NEWLINE_INTO_FRINGE): For R2L lines, consider the left fringe, not the right one. (notice_overwritten_cursor, draw_phys_cursor_glyph) (erase_phys_cursor): For reversed cursor_row, support cursor on the left fringe. fringe.c (update_window_fringes): For R2L rows, swap the bitmaps of continuation indicators on the fringes. (draw_fringe_bitmap): For reversed glyph rows, allow cursor on the left fringe. w32term.c (w32_draw_window_cursor): For reversed glyph rows, draw cursor on the left fringe. xterm.c (x_draw_window_cursor): For reversed glyph rows, draw cursor on the left fringe. dispnew.c (update_text_area): Handle reversed desired rows when the cursor is on the left fringe. (set_window_cursor_after_update): Limit cursor's hpos by -1 from below, not by 0, for when the cursor is on the left fringe. xdisp.c (unproduce_glyphs): New function. (display_line): Use it when produced glyphs are discarded from R2L glyph rows. (append_composite_glyph): In R2L rows, prepend the glyph rather than appending it. term.c (append_composite_glyph): In R2L rows, prepend the glyph rather than append it. Set up the resolved_level and bidi_type attributes of the appended glyph. (produce_special_glyphs): Mirror the backslash continuation character in R2L lines.

/* GNU Emacs case conversion functions.
   Copyright (C) 1985, 1994, 1997, 1998, 1999, 2001, 2002, 2003, 2004,
                 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.

This file is part of GNU Emacs.

GNU Emacs is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

GNU Emacs is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.  */


#include <config.h>
#include <setjmp.h>
#include "lisp.h"
#include "buffer.h"
#include "character.h"
#include "commands.h"
#include "syntax.h"
#include "composite.h"
#include "keymap.h"

enum case_action {CASE_UP, CASE_DOWN, CASE_CAPITALIZE, CASE_CAPITALIZE_UP};

Lisp_Object Qidentity;

Lisp_Object
casify_object (flag, obj)
     enum case_action flag;
     Lisp_Object obj;
{
  register int c, c1;
  register int inword = flag == CASE_DOWN;

  /* If the case table is flagged as modified, rescan it.  */
  if (NILP (XCHAR_TABLE (current_buffer->downcase_table)->extras[1]))
    Fset_case_table (current_buffer->downcase_table);

  if (INTEGERP (obj))
    {
      int flagbits = (CHAR_ALT | CHAR_SUPER | CHAR_HYPER
		      | CHAR_SHIFT | CHAR_CTL | CHAR_META);
      int flags = XINT (obj) & flagbits;
      int multibyte = ! NILP (current_buffer->enable_multibyte_characters);

      /* If the character has higher bits set
	 above the flags, return it unchanged.
	 It is not a real character.  */
      if ((unsigned) XFASTINT (obj) > (unsigned) flagbits)
	return obj;

      c1 = XFASTINT (obj) & ~flagbits;
      /* FIXME: Even if enable-multibyte-characters is nil, we may
	 manipulate multibyte chars.  This means we have a bug for latin-1
	 chars since when we receive an int 128-255 we can't tell whether
	 it's an eight-bit byte or a latin-1 char.  */
      if (c1 >= 256)
	multibyte = 1;
      if (! multibyte)
	MAKE_CHAR_MULTIBYTE (c1);
      c = DOWNCASE (c1);
      if (inword)
	XSETFASTINT (obj, c | flags);
      else if (c == (XFASTINT (obj) & ~flagbits))
	{
	  if (! inword)
	    c = UPCASE1 (c1);
	  if (! multibyte)
	    MAKE_CHAR_UNIBYTE (c);
	  XSETFASTINT (obj, c | flags);
	}
      return obj;
    }

  if (!STRINGP (obj))
    wrong_type_argument (Qchar_or_string_p, obj);
  else if (!STRING_MULTIBYTE (obj))
    {
      EMACS_INT i;
      EMACS_INT size = SCHARS (obj);

      obj = Fcopy_sequence (obj);
      for (i = 0; i < size; i++)
	{
	  c = SREF (obj, i);
	  MAKE_CHAR_MULTIBYTE (c);
	  c1 = c;
	  if (inword && flag != CASE_CAPITALIZE_UP)
	    c = DOWNCASE (c);
	  else if (!UPPERCASEP (c)
		   && (!inword || flag != CASE_CAPITALIZE_UP))
	    c = UPCASE1 (c1);
	  if ((int) flag >= (int) CASE_CAPITALIZE)
	    inword = (SYNTAX (c) == Sword);
	  if (c != c1)
	    {
		  MAKE_CHAR_UNIBYTE (c);
	      /* If the char can't be converted to a valid byte, just don't
		 change it.  */
	      if (c >= 0 && c < 256)
		SSET (obj, i, c);
	    }
	}
      return obj;
    }
  else
    {
      EMACS_INT i, i_byte, size = SCHARS (obj);
      int len;
      USE_SAFE_ALLOCA;
      unsigned char *dst, *o;
      /* Over-allocate by 12%: this is a minor overhead, but should be
	 sufficient in 99.999% of the cases to avoid a reallocation.  */
      EMACS_INT o_size = SBYTES (obj) + SBYTES (obj) / 8 + MAX_MULTIBYTE_LENGTH;
      SAFE_ALLOCA (dst, void *, o_size);
      o = dst;

      for (i = i_byte = 0; i < size; i++, i_byte += len)
	{
	  if ((o - dst) + MAX_MULTIBYTE_LENGTH > o_size)
	    { /* Not enough space for the next char: grow the destination.  */
	      unsigned char *old_dst = dst;
	      o_size += o_size;	/* Probably overkill, but extremely rare.  */
	      SAFE_ALLOCA (dst, void *, o_size);
	      bcopy (old_dst, dst, o - old_dst);
	      o = dst + (o - old_dst);
	    }
	  c = STRING_CHAR_AND_LENGTH (SDATA (obj) + i_byte, len);
	  if (inword && flag != CASE_CAPITALIZE_UP)
	    c = DOWNCASE (c);
	  else if (!UPPERCASEP (c)
		   && (!inword || flag != CASE_CAPITALIZE_UP))
	    c = UPCASE1 (c);
	  if ((int) flag >= (int) CASE_CAPITALIZE)
	    inword = (SYNTAX (c) == Sword);
	  o += CHAR_STRING (c, o);
	}
      eassert (o - dst <= o_size);
      obj = make_multibyte_string (dst, size, o - dst);
      SAFE_FREE ();
      return obj;
    }
}

DEFUN ("upcase", Fupcase, Supcase, 1, 1, 0,
       doc: /* Convert argument to upper case and return that.
The argument may be a character or string.  The result has the same type.
The argument object is not altered--the value is a copy.
See also `capitalize', `downcase' and `upcase-initials'.  */)
     (obj)
     Lisp_Object obj;
{
  return casify_object (CASE_UP, obj);
}

DEFUN ("downcase", Fdowncase, Sdowncase, 1, 1, 0,
       doc: /* Convert argument to lower case and return that.
The argument may be a character or string.  The result has the same type.
The argument object is not altered--the value is a copy.  */)
     (obj)
     Lisp_Object obj;
{
  return casify_object (CASE_DOWN, obj);
}

DEFUN ("capitalize", Fcapitalize, Scapitalize, 1, 1, 0,
       doc: /* Convert argument to capitalized form and return that.
This means that each word's first character is upper case
and the rest is lower case.
The argument may be a character or string.  The result has the same type.
The argument object is not altered--the value is a copy.  */)
     (obj)
     Lisp_Object obj;
{
  return casify_object (CASE_CAPITALIZE, obj);
}

/* Like Fcapitalize but change only the initials.  */

DEFUN ("upcase-initials", Fupcase_initials, Supcase_initials, 1, 1, 0,
       doc: /* Convert the initial of each word in the argument to upper case.
Do not change the other letters of each word.
The argument may be a character or string.  The result has the same type.
The argument object is not altered--the value is a copy.  */)
     (obj)
     Lisp_Object obj;
{
  return casify_object (CASE_CAPITALIZE_UP, obj);
}

/* flag is CASE_UP, CASE_DOWN or CASE_CAPITALIZE or CASE_CAPITALIZE_UP.
   b and e specify range of buffer to operate on. */

void
casify_region (flag, b, e)
     enum case_action flag;
     Lisp_Object b, e;
{
  register int c;
  register int inword = flag == CASE_DOWN;
  register int multibyte = !NILP (current_buffer->enable_multibyte_characters);
  EMACS_INT start, end;
  EMACS_INT start_byte, end_byte;
  EMACS_INT first = -1, last;	/* Position of first and last changes.  */
  EMACS_INT opoint = PT;
  EMACS_INT opoint_byte = PT_BYTE;

  if (EQ (b, e))
    /* Not modifying because nothing marked */
    return;

  /* If the case table is flagged as modified, rescan it.  */
  if (NILP (XCHAR_TABLE (current_buffer->downcase_table)->extras[1]))
    Fset_case_table (current_buffer->downcase_table);

  validate_region (&b, &e);
  start = XFASTINT (b);
  end = XFASTINT (e);
  modify_region (current_buffer, start, end, 0);
  record_change (start, end - start);
  start_byte = CHAR_TO_BYTE (start);
  end_byte = CHAR_TO_BYTE (end);

  while (start < end)
    {
      int c2, len;

      if (multibyte)
	{
	  c = FETCH_MULTIBYTE_CHAR (start_byte);
	  len = CHAR_BYTES (c);
	}
      else
	{
	  c = FETCH_BYTE (start_byte);
	  MAKE_CHAR_MULTIBYTE (c);
	  len = 1;
	}
      c2 = c;
      if (inword && flag != CASE_CAPITALIZE_UP)
	c = DOWNCASE (c);
      else if (!UPPERCASEP (c)
	       && (!inword || flag != CASE_CAPITALIZE_UP))
	c = UPCASE1 (c);
      if ((int) flag >= (int) CASE_CAPITALIZE)
	inword = ((SYNTAX (c) == Sword) && (inword || !SYNTAX_PREFIX (c)));
      if (c != c2)
	{
	  last = start;
	  if (first < 0)
	    first = start;

	  if (! multibyte)
	    {
	      MAKE_CHAR_UNIBYTE (c);
	      FETCH_BYTE (start_byte) = c;
	    }
	  else if (ASCII_CHAR_P (c2) && ASCII_CHAR_P (c))
	    FETCH_BYTE (start_byte) = c;
	  else
	    {
	      int tolen = CHAR_BYTES (c);
	      int j;
	      unsigned char str[MAX_MULTIBYTE_LENGTH];

	      CHAR_STRING (c, str);
	      if (len == tolen)
		{
		  /* Length is unchanged.  */
		  for (j = 0; j < len; ++j)
		    FETCH_BYTE (start_byte + j) = str[j];
		}
	      else
		{
		  /* Replace one character with the other,
		     keeping text properties the same.  */
		  replace_range_2 (start, start_byte,
				   start + 1, start_byte + len,
				   str, 1, tolen,
				   0);
		  len = tolen;
		}
	    }
	}
      start++;
      start_byte += len;
    }

  if (PT != opoint)
    TEMP_SET_PT_BOTH (opoint, opoint_byte);

  if (first >= 0)
    {
      signal_after_change (first, last + 1 - first, last + 1 - first);
      update_compositions (first, last + 1, CHECK_ALL);
    }
}

DEFUN ("upcase-region", Fupcase_region, Supcase_region, 2, 2, "r",
       doc: /* Convert the region to upper case.  In programs, wants two arguments.
These arguments specify the starting and ending character numbers of
the region to operate on.  When used as a command, the text between
point and the mark is operated on.
See also `capitalize-region'.  */)
     (beg, end)
     Lisp_Object beg, end;
{
  casify_region (CASE_UP, beg, end);
  return Qnil;
}

DEFUN ("downcase-region", Fdowncase_region, Sdowncase_region, 2, 2, "r",
       doc: /* Convert the region to lower case.  In programs, wants two arguments.
These arguments specify the starting and ending character numbers of
the region to operate on.  When used as a command, the text between
point and the mark is operated on.  */)
     (beg, end)
     Lisp_Object beg, end;
{
  casify_region (CASE_DOWN, beg, end);
  return Qnil;
}

DEFUN ("capitalize-region", Fcapitalize_region, Scapitalize_region, 2, 2, "r",
       doc: /* Convert the region to capitalized form.
Capitalized form means each word's first character is upper case
and the rest of it is lower case.
In programs, give two arguments, the starting and ending
character positions to operate on.  */)
     (beg, end)
     Lisp_Object beg, end;
{
  casify_region (CASE_CAPITALIZE, beg, end);
  return Qnil;
}

/* Like Fcapitalize_region but change only the initials.  */

DEFUN ("upcase-initials-region", Fupcase_initials_region,
       Supcase_initials_region, 2, 2, "r",
       doc: /* Upcase the initial of each word in the region.
Subsequent letters of each word are not changed.
In programs, give two arguments, the starting and ending
character positions to operate on.  */)
     (beg, end)
     Lisp_Object beg, end;
{
  casify_region (CASE_CAPITALIZE_UP, beg, end);
  return Qnil;
}

static Lisp_Object
operate_on_word (arg, newpoint)
     Lisp_Object arg;
     EMACS_INT *newpoint;
{
  Lisp_Object val;
  int farend;
  int iarg;

  CHECK_NUMBER (arg);
  iarg = XINT (arg);
  farend = scan_words (PT, iarg);
  if (!farend)
    farend = iarg > 0 ? ZV : BEGV;

  *newpoint = PT > farend ? PT : farend;
  XSETFASTINT (val, farend);

  return val;
}

DEFUN ("upcase-word", Fupcase_word, Supcase_word, 1, 1, "p",
       doc: /* Convert following word (or ARG words) to upper case, moving over.
With negative argument, convert previous words but do not move.
See also `capitalize-word'.  */)
     (arg)
     Lisp_Object arg;
{
  Lisp_Object beg, end;
  EMACS_INT newpoint;
  XSETFASTINT (beg, PT);
  end = operate_on_word (arg, &newpoint);
  casify_region (CASE_UP, beg, end);
  SET_PT (newpoint);
  return Qnil;
}

DEFUN ("downcase-word", Fdowncase_word, Sdowncase_word, 1, 1, "p",
       doc: /* Convert following word (or ARG words) to lower case, moving over.
With negative argument, convert previous words but do not move.  */)
     (arg)
     Lisp_Object arg;
{
  Lisp_Object beg, end;
  EMACS_INT newpoint;
  XSETFASTINT (beg, PT);
  end = operate_on_word (arg, &newpoint);
  casify_region (CASE_DOWN, beg, end);
  SET_PT (newpoint);
  return Qnil;
}

DEFUN ("capitalize-word", Fcapitalize_word, Scapitalize_word, 1, 1, "p",
       doc: /* Capitalize the following word (or ARG words), moving over.
This gives the word(s) a first character in upper case
and the rest lower case.
With negative argument, capitalize previous words but do not move.  */)
     (arg)
     Lisp_Object arg;
{
  Lisp_Object beg, end;
  EMACS_INT newpoint;
  XSETFASTINT (beg, PT);
  end = operate_on_word (arg, &newpoint);
  casify_region (CASE_CAPITALIZE, beg, end);
  SET_PT (newpoint);
  return Qnil;
}

void
syms_of_casefiddle ()
{
  Qidentity = intern_c_string ("identity");
  staticpro (&Qidentity);
  defsubr (&Supcase);
  defsubr (&Sdowncase);
  defsubr (&Scapitalize);
  defsubr (&Supcase_initials);
  defsubr (&Supcase_region);
  defsubr (&Sdowncase_region);
  defsubr (&Scapitalize_region);
  defsubr (&Supcase_initials_region);
  defsubr (&Supcase_word);
  defsubr (&Sdowncase_word);
  defsubr (&Scapitalize_word);
}

void
keys_of_casefiddle ()
{
  initial_define_key (control_x_map, Ctl('U'), "upcase-region");
  Fput (intern ("upcase-region"), Qdisabled, Qt);
  initial_define_key (control_x_map, Ctl('L'), "downcase-region");
  Fput (intern ("downcase-region"), Qdisabled, Qt);

  initial_define_key (meta_map, 'u', "upcase-word");
  initial_define_key (meta_map, 'l', "downcase-word");
  initial_define_key (meta_map, 'c', "capitalize-word");
}

/* arch-tag: 60a73c66-5489-47e7-a81f-cead4057c526
   (do not change this comment) */