view src/md5.h @ 107998:531d454c3a99

Implement GUI display of R2L lines, fix TTY display of R2L lines. xdisp.c [HAVE_WINDOW_SYSTEM]: Add prototype for append_stretch_glyph. (set_cursor_from_row) <cursor_x>: Remove unused variable. Fix off-by-one error in computing x at end of text in the row. (append_stretch_glyph): In reversed row, prepend the glyph rather than append it. Set resolved_level and bidi_type of the glyph. (extend_face_to_end_of_line): If the row is reversed, prepend a stretch glyph whose width is such that the rightmost glyph will be drawn at the right margin of the window. Fix off-by-one error on TTY frames in testing whether a line needs face extension. Fix face extension at ZV. If this is the last glyph row, use DEFAULT_FACE_ID, to avoid painting the rest of the window with the region face. (set_cursor_from_row, display_line): Use MATRIX_ROW_CONTINUATION_LINE_P instead of testing value of row->continuation_lines_width. (next_element_from_buffer): Don't call bidi_paragraph_init if we are at ZV. Fixes a crash when reseated to ZV by try_window_reusing_current_matrix. (display_and_set_cursor, erase_phys_cursor): Handle negative HPOS, which happens with R2L glyph rows. Fixes a crash when inserting a character at end of an R2L line. (set_cursor_from_row): Don't be fooled by truncated rows: don't treat them as having zero-width characters. Improve comments. Don't reverse pos_before and pos_after for reversed glyph rows. Set cursor.x to negative value when the cursor might be on the left fringe. (IT_OVERFLOW_NEWLINE_INTO_FRINGE): For R2L lines, consider the left fringe, not the right one. (notice_overwritten_cursor, draw_phys_cursor_glyph) (erase_phys_cursor): For reversed cursor_row, support cursor on the left fringe. fringe.c (update_window_fringes): For R2L rows, swap the bitmaps of continuation indicators on the fringes. (draw_fringe_bitmap): For reversed glyph rows, allow cursor on the left fringe. w32term.c (w32_draw_window_cursor): For reversed glyph rows, draw cursor on the left fringe. xterm.c (x_draw_window_cursor): For reversed glyph rows, draw cursor on the left fringe. dispnew.c (update_text_area): Handle reversed desired rows when the cursor is on the left fringe. (set_window_cursor_after_update): Limit cursor's hpos by -1 from below, not by 0, for when the cursor is on the left fringe. xdisp.c (unproduce_glyphs): New function. (display_line): Use it when produced glyphs are discarded from R2L glyph rows. (append_composite_glyph): In R2L rows, prepend the glyph rather than appending it. term.c (append_composite_glyph): In R2L rows, prepend the glyph rather than append it. Set up the resolved_level and bidi_type attributes of the appended glyph. (produce_special_glyphs): Mirror the backslash continuation character in R2L lines.

/* Declaration of functions and data types used for MD5 sum computing
   library functions.
   Copyright (C) 1995, 1996, 1997, 1999, 2000, 2001, 2002, 2003, 2004,
                 2005, 2006, 2007  Free Software Foundation, Inc.
   This file is part of GNU Emacs.

   The GNU C Library is free software; you can redistribute it and/or
   modify it under the terms of the GNU General Public License as
   published by the Free Software Foundation; either version 2 of the
   License, or (at your option) any later version.

   The GNU C Library is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
   General Public License for more details.

   You should have received a copy of the GNU General Public
   License along with the GNU C Library; see the file COPYING.  If not,
   write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
   Boston, MA 02110-1301, USA.  */

#ifndef _MD5_H
#define _MD5_H 1

#include <stdio.h>

#if defined HAVE_LIMITS_H || _LIBC
# include <limits.h>
#endif

/* The following contortions are an attempt to use the C preprocessor
   to determine an unsigned integral type that is 32 bits wide.  An
   alternative approach is to use autoconf's AC_CHECK_SIZEOF macro, but
   doing that would require that the configure script compile and *run*
   the resulting executable.  Locally running cross-compiled executables
   is usually not possible.  */

#ifdef _LIBC
# include <sys/types.h>
typedef u_int32_t md5_uint32;
#else
# if defined __STDC__ && __STDC__
#  define UINT_MAX_32_BITS 4294967295U
# else
#  define UINT_MAX_32_BITS 0xFFFFFFFF
# endif

/* If UINT_MAX isn't defined, assume it's a 32-bit type.
   This should be valid for all systems GNU cares about because
   that doesn't include 16-bit systems, and only modern systems
   (that certainly have <limits.h>) have 64+-bit integral types.  */

# ifndef UINT_MAX
#  define UINT_MAX UINT_MAX_32_BITS
# endif

# if UINT_MAX == UINT_MAX_32_BITS
   typedef unsigned int md5_uint32;
# else
#  if USHRT_MAX == UINT_MAX_32_BITS
    typedef unsigned short md5_uint32;
#  else
#   if ULONG_MAX == UINT_MAX_32_BITS
     typedef unsigned long md5_uint32;
#   else
     /* The following line is intended to evoke an error.
        Using #error is not portable enough.  */
     "Cannot determine unsigned 32-bit data type."
#   endif
#  endif
# endif
#endif


#ifndef __GNUC__
#define __attribute__(X)
#define __alignof__(X) 1
#endif

/* Structure to save state of computation between the single steps.  */
struct md5_ctx
{
  md5_uint32 A;
  md5_uint32 B;
  md5_uint32 C;
  md5_uint32 D;

  md5_uint32 total[2];
  md5_uint32 buflen;
  char buffer[128] __attribute__ ((__aligned__ (__alignof__ (md5_uint32))));
};

/*
 * The following three functions are build up the low level used in
 * the functions `md5_stream' and `md5_buffer'.
 */

/* Initialize structure containing state of computation.
   (RFC 1321, 3.3: Step 3)  */
extern void md5_init_ctx __P ((struct md5_ctx *ctx));

/* Starting with the result of former calls of this function (or the
   initialization function update the context for the next LEN bytes
   starting at BUFFER.
   It is necessary that LEN is a multiple of 64!!! */
extern void md5_process_block __P ((const void *buffer, size_t len,
				      struct md5_ctx *ctx));

/* Starting with the result of former calls of this function (or the
   initialization function update the context for the next LEN bytes
   starting at BUFFER.
   It is NOT required that LEN is a multiple of 64.  */
extern void md5_process_bytes __P ((const void *buffer, size_t len,
				      struct md5_ctx *ctx));

/* Process the remaining bytes in the buffer and put result from CTX
   in first 16 bytes following RESBUF.  The result is always in little
   endian byte order, so that a byte-wise output yields to the wanted
   ASCII representation of the message digest.

   IMPORTANT: On some systems it is required that RESBUF is correctly
   aligned for a 32 bits value.  */
extern void *md5_finish_ctx __P ((struct md5_ctx *ctx, void *resbuf));


/* Put result from CTX in first 16 bytes following RESBUF.  The result is
   always in little endian byte order, so that a byte-wise output yields
   to the wanted ASCII representation of the message digest.

   IMPORTANT: On some systems it is required that RESBUF is correctly
   aligned for a 32 bits value.  */
extern void *md5_read_ctx __P ((const struct md5_ctx *ctx, void *resbuf));


/* Compute MD5 message digest for bytes read from STREAM.  The
   resulting message digest number will be written into the 16 bytes
   beginning at RESBLOCK.  */
extern int md5_stream __P ((FILE *stream, void *resblock));

/* Compute MD5 message digest for LEN bytes beginning at BUFFER.  The
   result is always in little endian byte order, so that a byte-wise
   output yields to the wanted ASCII representation of the message
   digest.  */
extern void *md5_buffer __P ((const char *buffer, size_t len,
				void *resblock));

#endif /* md5.h */

/* arch-tag: 7cd389f3-6c40-4950-999d-0b2ebd1d20d7
   (do not change this comment) */