# Makefile for lib-src subdirectory in GNU Emacs.# Copyright (C) 1985, 1987, 1988, 1993, 1994 Free Software Foundation, Inc.# This file is part of GNU Emacs.# GNU Emacs is free software; you can redistribute it and/or modify# it under the terms of the GNU General Public License as published by# the Free Software Foundation; either version 2, or (at your option)# any later version.# GNU Emacs is distributed in the hope that it will be useful,# but WITHOUT ANY WARRANTY; without even the implied warranty of# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the# GNU General Public License for more details.# You should have received a copy of the GNU General Public License# along with GNU Emacs; see the file COPYING. If not, write to# the Free Software Foundation, Inc., 59 Temple Place - Suite 330,# Boston, MA 02111-1307, USA.# Avoid trouble on systems where the `SHELL' variable might be# inherited from the environment.SHELL = /bin/sh# ==================== Things `configure' will edit ====================CC=@CC@CFLAGS=@CFLAGS@ALLOCA=@ALLOCA@YACC=@YACC@version=@version@configuration=@configuration@# ==================== Where To Install Things ====================# The default location for installation. Everything is placed in# subdirectories of this directory. The default values for many of# the variables below are expressed in terms of this one, so you may# not need to change them. This is set with the --prefix option to# `../configure'.prefix=@prefix@# Like `prefix', but used for architecture-specific files. This is# set with the --exec-prefix option to `../configure'.exec_prefix=@exec_prefix@# Where to install Emacs and other binaries that people will want to# run directly (like etags). This is set with the --bindir option# to `../configure'.bindir=@bindir@# Where to install and expect executable files to be run by Emacs# rather than directly by users, and other architecture-dependent# data. ${archlibdir} is usually below this. This is set with the# --libexecdir option to `../configure'.libexecdir=@libexecdir@# Where to find the source code. This is set by the configure# script's `--srcdir' option. However, the value of ${srcdir} in# this makefile is not identical to what was specified with --srcdir,# since the variable here has `/lib-src' added at the end.# We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.srcdir=@srcdir@VPATH=@srcdir@# The top-level source directory, also set by configure.top_srcdir=@top_srcdir@# ==================== Emacs-specific directories ====================# These variables hold the values Emacs will actually use. They are# based on the values of the standard Make variables above.# Where to put executables to be run by Emacs rather than the user.# This path usually includes the Emacs version and configuration name,# so that multiple configurations for multiple versions of Emacs may# be installed at once. This can be set with the --archlibdir option# to `../configure'.archlibdir=@archlibdir@# ==================== Utility Programs for the Build =================# ../configure figures out the correct values for these.INSTALL = @INSTALL@INSTALL_PROGRAM = @INSTALL_PROGRAM@INSTALL_DATA = @INSTALL_DATA@# By default, we uphold the dignity of our programs.INSTALL_STRIP =# ========================== Lists of Files ===========================# Things that a user might actually run,# which should be installed in bindir.INSTALLABLES = etags ctags emacsclient b2m ebrowseINSTALLABLE_SCRIPTS = rcs-checkin grep-changelog# Things that Emacs runs internally, or during the build process,# which should not be installed in bindir.UTILITIES= profile digest-doc \ sorted-doc movemail cvtmail fakemail yow emacsserver hexlDONT_INSTALL= test-distrib make-docfile# Like UTILITIES, but they're not system-dependent, and should not be# deleted by the distclean target.SCRIPTS= rcs2log vcdiffEXECUTABLES= ${UTILITIES} ${INSTALLABLES} ${SCRIPTS} ${INSTALLABLE_SCRIPTS}SOURCES = COPYING ChangeLog Makefile.in README emacs.csh \ makedoc.com *.[chy] rcs2log vcdiff# Additional -D flags for movemail (add to MOVE_FLAGS if desired):# MAIL_USE_POP Support mail retrieval from a POP mailbox.# MAIL_USE_MMDF Support MMDF mailboxes.# MAIL_USE_FLOCK Use flock for file locking (see the comments# about locking in movemail.c)# MAIL_UNLINK_SPOOL Unlink the user's spool mailbox after reading# it (instead of just emptying it).# KERBEROS Support Kerberized POP.# KRB5 Support Kerberos Version 5 pop instead of# Version 4 (define this in addition to# KERBEROS).# HESIOD Support Hesiod lookups of user mailboxes.# MAILHOST A string, the host name of the default POP# mail host for the site.MOVE_FLAGS=# ========================== start of cpp stuff =======================/* From here on, comments must be done in C syntax. */#define NO_SHORTNAMES#define THIS_IS_MAKEFILE#define NOT_C_CODE#include "../src/config.h"/* We won't really call alloca; don't let the file name alloca.c get messed up. */#ifdef alloca#undef alloca#endif/* Some machines don't find the standard C libraries in the usual place. */#ifndef ORDINARY_LINK#ifndef LIB_STANDARD_LIBSRC#define LIB_STANDARD_LIBSRC -lc#endif#else#ifndef LIB_STANDARD_LIBSRC#define LIB_STANDARD_LIBSRC#endif#endif/* Some s/SYSTEM.h files define this to request special libraries. */#ifndef LIBS_SYSTEM#define LIBS_SYSTEM#endif/* Some m/MACHINE.h files define this to request special libraries. */#ifndef LIBS_MACHINE#define LIBS_MACHINE#endif#ifndef C_SWITCH_SYSTEM#define C_SWITCH_SYSTEM#endif#ifndef C_SWITCH_MACHINE#define C_SWITCH_MACHINE#endif#undef MOVEMAIL_NEEDS_BLESSING#ifndef MAIL_USE_FLOCK#ifndef MAIL_USE_LOCKF#define MOVEMAIL_NEEDS_BLESSING#endif#endif#ifdef MOVEMAIL_NEEDS_BLESSING#define BLESSMAIL blessmail#else#define BLESSMAIL#endif#ifdef KERBEROS# ifdef HAVE_LIBKRB KRB4LIB = -lkrb# else# ifdef HAVE_LIBKRB4 KRB4LIB = -lkrb4# endif# endif# ifdef HAVE_LIBDES DESLIB = -ldes# else# ifdef HAVE_LIBDES425 DESLIB = -ldes425# endif# endif# ifdef HAVE_LIBKRB5 KRB5LIB = -lkrb5# endif# ifdef HAVE_LIBCRYPTO CRYPTOLIB = -lcrypto# endif# ifdef HAVE_LIBCOM_ERR COM_ERRLIB = -lcom_err# endif#endif /* KERBEROS *//* If HESIOD is defined, set this to "-lhesiod". */HESIODLIB=MOVE_LIBS=$(KRB4LIB) $(DESLIB) $(KRB5LIB) $(CRYPTOLIB) $(COM_ERRLIB) $(HESIODLIB)#ifdef HAVE_LIBMAILLIBMAIL=-lmail#endifLOADLIBES=LIBS_SYSTEM LIBS_MACHINE LIB_STANDARD_LIBSRC/* We need to #define emacs to get the right versions of some files. Some other files - those shared with other GNU utilities - need HAVE_CONFIG_H #defined before they know they can take advantage of the information in ../src/config.h. */ALL_CFLAGS = C_SWITCH_SYSTEM C_SWITCH_MACHINE -DHAVE_CONFIG_H \ -I. -I../src -I${srcdir} -I${srcdir}/../src ${LDFLAGS} ${CPPFLAGS} ${CFLAGS}LINK_CFLAGS = C_SWITCH_SYSTEM C_SWITCH_MACHINE -DHAVE_CONFIG_H \ -I. -I../src -I${srcdir} -I${srcdir}/../src ${LDFLAGS} ${CFLAGS}CPP_CFLAGS = C_SWITCH_SYSTEM C_SWITCH_MACHINE -DHAVE_CONFIG_H \ -I. -I../src -I${srcdir} -I${srcdir}/../src ${CPPFLAGS} ${CFLAGS}/* This was all of CPP_CFLAGS except -Demacs. Now that -Demacs has been deleted from CPP_CFLAGS, this is actually the same as CPP_CFLAGS, but let's not delete it yet. */BASE_CFLAGS = C_SWITCH_SYSTEM C_SWITCH_MACHINE -DHAVE_CONFIG_H \ -I. -I../src -I${srcdir} -I${srcdir}/../src ${CPPFLAGS} ${CFLAGS}/* This is the default compilation command. But we should never rely on it, because some make version failed to find it for getopt.o. Using an explicit command made it work. */.c.o: ${CC} -c ${CPP_CFLAGS} $<all: ${DONT_INSTALL} ${UTILITIES} ${INSTALLABLES}#ifdef MOVEMAIL_NEEDS_BLESSINGblessmail: ../src/emacs -batch -l $(srcdir)/../lisp/mail/blessmail.el chmod +x blessmail#endifmaybe-blessmail: BLESSMAIL#ifdef MOVEMAIL_NEEDS_BLESSING/* Don't charge ahead and do it! Let the installer decide. ./blessmail ${archlibdir}/movemail */ @if [ `wc -l <blessmail` != 2 ] ; then \ dir=`sed -n -e 's/echo mail directory = \(.*\)/\1/p' blessmail`; \ echo Assuming $$dir is really the mail spool directory, you should; \ echo run lib-src/blessmail ${archlibdir}/movemail; \ echo as root, to give movemail appropriate permissions.; \ echo Do that after running make install.; \ fi#endif/* Install the internal utilities. Until they are installed, we can just run them directly from lib-src. */${archlibdir}: all @echo @echo "Installing utilities run internally by Emacs." $(top_srcdir)/mkinstalldirs ${archlibdir} if [ `(cd ${archlibdir} && /bin/pwd)` != `/bin/pwd` ]; then \ for file in ${UTILITIES}; do \ $(INSTALL_PROGRAM) $(INSTALL_STRIP) $$file ${archlibdir}/$$file ; \ done ; \ fi if [ `(cd ${archlibdir} && /bin/pwd)` \ != `(cd ${srcdir} && /bin/pwd)` ]; then \ for file in ${SCRIPTS}; do \ $(INSTALL_PROGRAM) ${srcdir}/$$file ${archlibdir}/$$file; \ done ; \ fiinstall: ${archlibdir} @echo @echo "Installing utilities for users to run." for file in ${INSTALLABLES} ; do \ $(INSTALL_PROGRAM) $(INSTALL_STRIP) $${file} ${bindir}/$${file} ; \ chmod a+rx ${bindir}/$${file}; \ done for file in ${INSTALLABLE_SCRIPTS} ; do \ $(INSTALL_PROGRAM) ${srcdir}/$${file} ${bindir}/$${file} ; \ chmod a+rx ${bindir}/$${file}; \ doneuninstall: (cd ${bindir}; \ rm -f ${INSTALLABLES} ${INSTALLABLE_SCRIPTS}) (cd ${archlibdir}; \ rm -f ${UTILITIES} ${INSTALLABLES} ${SCRIPTS} ${INSTALLABLE_SCRIPTS})mostlyclean: -rm -f core *.oclean: mostlyclean -rm -f ${INSTALLABLES} ${UTILITIES} ${DONT_INSTALL} -rm -f ../etc/DOC* fns*.el *.tab.c *.tab.hdistclean: clean -rm -f TAGS -rm -f Makefile Makefile.c blessmailmaintainer-clean: distclean trueextraclean: maintainer-clean -rm -f *~ \#*unlock: chmod u+w $(SOURCES)relock: chmod u-w $(SOURCES)/* Test the contents of the directory. */check: @echo "We don't have any tests for GNU Emacs yet."tags: TAGSTAGS: etags etags *.[ch]/* This verifies that the non-ASCII characters in the file `testfile' have not been clobbered by whatever means were used to copy and distribute Emacs. If they were clobbered, all the .elc files were clobbered too. */test-distrib: ${srcdir}/test-distrib.c $(CC) ${ALL_CFLAGS} -o test-distrib ${srcdir}/test-distrib.c ./test-distrib ${srcdir}/testfileGETOPTOBJS = getopt.o getopt1.o $(ALLOCA)GETOPTDEPS = $(GETOPTOBJS) ${srcdir}/getopt.hgetopt.o: ${srcdir}/getopt.c ${srcdir}/getopt.h ${CC} -c ${CPP_CFLAGS} ${srcdir}/getopt.cgetopt1.o: ${srcdir}/getopt1.c ${srcdir}/getopt.h ${CC} -c ${CPP_CFLAGS} ${srcdir}/getopt1.calloca.o: ${srcdir}/alloca.c ${CC} -Demacs -c ${BASE_CFLAGS} ${srcdir}/alloca.c#ifdef REGEXP_IN_LIBCREGEXPOBJ =REGEXPDEPS =#elseREGEXPOBJ = regex.oREGEXPDEPS = $(REGEXPOBJ) $(srcdir)/../src/regex.h#endifregex.o: $(srcdir)/../src/regex.c $(srcdir)/../src/regex.h ../src/config.h ${CC} -c ${BASE_CFLAGS} -DCONFIG_BROKETS -DINHIBIT_STRING_HEADER ${srcdir}/../src/regex.cetags: ${srcdir}/etags.c $(GETOPTDEPS) $(REGEXPDEPS) ../src/config.h $(CC) ${ALL_CFLAGS} -DVERSION="\"${version}\"" ${srcdir}/etags.c $(GETOPTOBJS) $(REGEXPOBJ) $(LOADLIBES) -o etagsebrowse: ${srcdir}/ebrowse.c $(GETOPTDEPS) ../src/config.h $(CC) ${ALL_CFLAGS} -DVERSION="\"${version}\"" ${srcdir}/ebrowse.c $(GETOPTOBJS) $(LOADLIBES) -o ebrowse/* We depend on etags to assure that parallel makes don't write two etags.o files on top of each other. */ctags: etags $(CC) ${ALL_CFLAGS} -DCTAGS -DVERSION="\"${version}\"" ${srcdir}/etags.c $(GETOPTOBJS) $(REGEXPOBJ) $(LOADLIBES) -o ctagsprofile: ${srcdir}/profile.c ../src/config.h $(CC) ${ALL_CFLAGS} ${srcdir}/profile.c $(LOADLIBES) -o profilemake-docfile: ${srcdir}/make-docfile.c ../src/config.h $(CC) ${ALL_CFLAGS} ${srcdir}/make-docfile.c $(LOADLIBES) -o make-docfiledigest-doc: ${srcdir}/digest-doc.c $(CC) ${ALL_CFLAGS} ${srcdir}/digest-doc.c $(LOADLIBES) -o digest-doc sorted-doc: ${srcdir}/sorted-doc.c ${ALLOCA} $(CC) ${ALL_CFLAGS} ${srcdir}/sorted-doc.c ${ALLOCA} $(LOADLIBES) -o sorted-docb2m: ${srcdir}/b2m.c ../src/config.h $(GETOPTDEPS) $(CC) ${ALL_CFLAGS} ${srcdir}/b2m.c -DVERSION="\"${version}\"" \ $(GETOPTOBJS) $(LOADLIBES) -o b2m movemail: movemail.o pop.o $(GETOPTDEPS) $(CC) ${LINK_CFLAGS} ${MOVE_FLAGS} movemail.o pop.o $(GETOPTOBJS) $(LOADLIBES) $(LIBMAIL) $(MOVE_LIBS) -o movemailmovemail.o: ${srcdir}/movemail.c ../src/config.h $(CC) -c ${CPP_CFLAGS} -Demacs ${MOVE_FLAGS} ${srcdir}/movemail.cpop.o: ${srcdir}/pop.c ../src/config.h $(CC) -c ${CPP_CFLAGS} ${MOVE_FLAGS} ${srcdir}/pop.ccvtmail: ${srcdir}/cvtmail.c $(CC) ${ALL_CFLAGS} ${srcdir}/cvtmail.c $(LOADLIBES) -o cvtmailfakemail: ${srcdir}/fakemail.c ../src/config.h $(CC) ${ALL_CFLAGS} ${srcdir}/fakemail.c $(LOADLIBES) -o fakemailyow: ${srcdir}/yow.c ../src/epaths.h $(CC) ${ALL_CFLAGS} ${srcdir}/yow.c $(LOADLIBES) -o yowemacsserver: ${srcdir}/emacsserver.c ../src/config.h $(CC) ${ALL_CFLAGS} ${srcdir}/emacsserver.c $(LOADLIBES) -o emacsserveremacsclient: ${srcdir}/emacsclient.c ../src/config.h $(GETOPTDEPS) $(CC) ${ALL_CFLAGS} ${srcdir}/emacsclient.c $(GETOPTOBJS) \ -DVERSION=`sed -n -e '/(defconst emacs-version/ s/^[^"]*\("[^"]*"\).*/\1/p' ${srcdir}/../lisp/version.el` \ $(LOADLIBES) -o emacsclienthexl: ${srcdir}/hexl.c ../src/config.h $(CC) ${ALL_CFLAGS} ${srcdir}/hexl.c $(LOADLIBES) -o hexl/* These are NOT included in INSTALLABLES or UTILITIES. See ../src/Makefile.in. */emacstool: ${srcdir}/emacstool.c $(CC) ${srcdir}/emacstool.c -o emacstool ${ALL_CFLAGS} \ -lsuntool -lsunwindow -lpixrect $(LOADLIBES)/* For SUN Japanese Language Environment. */nemacstool: ${srcdir}/emacstool.c $(CC) -o nemacstool -DJLE ${ALL_CFLAGS} ${srcdir}/emacstool.c \ -lsuntool -lmle -lsunwindow -lpixrect $(LOADLIBES)xvetool: ${srcdir}/emacstool.c $(CC) -o xvetool -DXVIEW ${ALL_CFLAGS} ${srcdir}/emacstool.c \ -lxview -lX -I$(OPENWINHOME)/include -L$(OPENWINHOME)/lib \ $(LOADLIBES)xveterm: ${srcdir}/emacstool.c $(CC) -o xveterm -DXVIEW -DTTERM ${ALL_CFLAGS} ${srcdir}/emacstool.c \ -lxview -lolgx -lX -I$(OPENWINHOME)/include -L$(OPENWINHOME)/lib \ $(LOADLIBES)