Mercurial > emacs
view lisp/isearch.el @ 88815:557d65677c96
*** empty log message ***
| author | Dave Love <fx@gnu.org> |
|---|---|
| date | Sat, 29 Jun 2002 11:10:01 +0000 |
| parents | d8c9fc60016e |
| children | 1918306a80b1 |
line wrap: on
line source
;;; isearch.el --- incremental search minor mode ;; Copyright (C) 1992, 93, 94, 95, 96, 97, 1999, 2000, 2001 ;; Free Software Foundation, Inc. ;; Author: Daniel LaLiberte <liberte@cs.uiuc.edu> ;; Maintainer: FSF ;; Keywords: matching ;; This file is part of GNU Emacs. ;; GNU Emacs is free software; you can redistribute it and/or modify ;; it under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 2, or (at your option) ;; any later version. ;; GNU Emacs is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;; GNU General Public License for more details. ;; You should have received a copy of the GNU General Public License ;; along with GNU Emacs; see the file COPYING. If not, write to the ;; Free Software Foundation, Inc., 59 Temple Place - Suite 330, ;; Boston, MA 02111-1307, USA. ;;; Commentary: ;; Instructions ;; For programmed use of isearch-mode, e.g. calling (isearch-forward), ;; isearch-mode behaves modally and does not return until the search ;; is completed. It uses a recursive-edit to behave this way. ;; The key bindings active within isearch-mode are defined below in ;; `isearch-mode-map' which is given bindings close to the default ;; characters of the original isearch.el. With `isearch-mode', ;; however, you can bind multi-character keys and it should be easier ;; to add new commands. One bug though: keys with meta-prefix cannot ;; be longer than two chars. Also see minibuffer-local-isearch-map ;; for bindings active during `isearch-edit-string'. ;; isearch-mode should work even if you switch windows with the mouse, ;; in which case isearch-mode is terminated automatically before the ;; switch. ;; The search ring and completion commands automatically put you in ;; the minibuffer to edit the string. This gives you a chance to ;; modify the search string before executing the search. There are ;; three commands to terminate the editing: C-s and C-r exit the ;; minibuffer and search forward and reverse respectively, while C-m ;; exits and does a nonincremental search. ;; Exiting immediately from isearch uses isearch-edit-string instead ;; of nonincremental-search, if search-nonincremental-instead is non-nil. ;; The name of this option should probably be changed if we decide to ;; keep the behavior. No point in forcing nonincremental search until ;; the last possible moment. ;; TODO ;; - Integrate the emacs 19 generalized command history. ;; - Think about incorporating query-replace. ;; - Hooks and options for failed search. ;;; Change Log: ;; Changes before those recorded in ChangeLog: ;; Revision 1.4 92/09/14 16:26:02 liberte ;; Added prefix args to isearch-forward, etc. to switch between ;; string and regular expression searching. ;; Added some support for lemacs. ;; Added general isearch-highlight option - but only for lemacs so far. ;; Added support for frame switching in emacs 19. ;; Added word search option to isearch-edit-string. ;; Renamed isearch-quit to isearch-abort. ;; Numerous changes to comments and doc strings. ;; ;; Revision 1.3 92/06/29 13:10:08 liberte ;; Moved modal isearch-mode handling into isearch-mode. ;; Got rid of buffer-local isearch variables. ;; isearch-edit-string used by ring adjustments, completion, and ;; nonincremental searching. C-s and C-r are additional exit commands. ;; Renamed all regex to regexp. ;; Got rid of found-start and found-point globals. ;; Generalized handling of upper-case chars. ;; Revision 1.2 92/05/27 11:33:57 liberte ;; Emacs version 19 has a search ring, which is supported here. ;; Other fixes found in the version 19 isearch are included here. ;; ;; Also see variables search-caps-disable-folding, ;; search-nonincremental-instead, search-whitespace-regexp, and ;; commands isearch-toggle-regexp, isearch-edit-string. ;; ;; semi-modal isearching is supported. ;; Changes for 1.1 ;; 3/18/92 Fixed invalid-regexp. ;; 3/18/92 Fixed yanking in regexps. ;;; Code: ;;; Some additional options and constants. (defgroup isearch nil "Incremental search minor mode." :link '(emacs-commentary-link "isearch") :link '(custom-manual "(emacs)Incremental Search") :prefix "isearch-" :prefix "search-" :group 'matching) (defcustom search-exit-option t "*Non-nil means random control characters terminate incremental search." :type 'boolean :group 'isearch) (defcustom search-slow-window-lines 1 "*Number of lines in slow search display windows. These are the short windows used during incremental search on slow terminals. Negative means put the slow search window at the top (normally it's at bottom) and the value is minus the number of lines." :type 'integer :group 'isearch) (defcustom search-slow-speed 1200 "*Highest terminal speed at which to use \"slow\" style incremental search. This is the style where a one-line window is created to show the line that the search has reached." :type 'integer :group 'isearch) (defcustom search-upper-case 'not-yanks "*If non-nil, upper case chars disable case fold searching. That is, upper and lower case chars must match exactly. This applies no matter where the chars come from, but does not apply to chars in regexps that are prefixed with `\\'. If this value is `not-yanks', yanked text is always downcased." :type '(choice (const :tag "off" nil) (const not-yanks) (other :tag "on" t)) :group 'isearch) (defcustom search-nonincremental-instead t "*If non-nil, do a nonincremental search instead if exiting immediately. Actually, `isearch-edit-string' is called to let you enter the search string, and RET terminates editing and does a nonincremental search." :type 'boolean :group 'isearch) (defcustom search-whitespace-regexp "\\s-+" "*If non-nil, regular expression to match a sequence of whitespace chars. This applies to regular expression incremental search. You might want to use something like \"[ \\t\\r\\n]+\" instead. In the Customization buffer, that is `[' followed by a space, a tab, a carriage return (control-M), a newline, and `]+'." :type 'regexp :group 'isearch) (defcustom search-highlight t "*Non-nil means incremental search highlights the current match." :type 'boolean :group 'isearch) (defcustom search-invisible 'open "If t incremental search can match hidden text. nil means don't match invisible text. If the value is `open', if the text matched is made invisible by an overlay having an `invisible' property and that overlay has a property `isearch-open-invisible', then incremental search will show the contents. \(This applies when using `outline.el' and `hideshow.el'.)" :type '(choice (const :tag "Match hidden text" t) (const :tag "Open overlays" open) (const :tag "Don't match hidden text" nil)) :group 'isearch) (defcustom isearch-hide-immediately t "If non-nil, re-hide an invisible match right away. This variable makes a difference when `search-invisible' is set to `open'. It means that after search makes some invisible text visible to show the match, it makes the text invisible again when the match moves. Ordinarily the text becomes invisible again at the end of the search." :type 'boolean :group 'isearch) (defcustom isearch-resume-enabled t "*If non-nil, `isearch-resume' commands are added to the command history." :type 'boolean :group 'isearch) (defvar isearch-mode-hook nil "Function(s) to call after starting up an incremental search.") (defvar isearch-mode-end-hook nil "Function(s) to call after terminating an incremental search.") ;;; Search ring. (defvar search-ring nil "List of search string sequences.") (defvar regexp-search-ring nil "List of regular expression search string sequences.") (defcustom search-ring-max 16 "*Maximum length of search ring before oldest elements are thrown away." :type 'integer :group 'isearch) (defcustom regexp-search-ring-max 16 "*Maximum length of regexp search ring before oldest elements are thrown away." :type 'integer :group 'isearch) (defvar search-ring-yank-pointer nil "Index in `search-ring' of last string reused. nil if none yet.") (defvar regexp-search-ring-yank-pointer nil "Index in `regexp-search-ring' of last string reused. nil if none yet.") (defcustom search-ring-update nil "*Non-nil if advancing or retreating in the search ring should cause search. Default value, nil, means edit the string instead." :type 'boolean :group 'isearch) ;;; Define isearch-mode keymap. (defvar isearch-mode-map (let* ((i 0) (map (make-keymap))) (or (vectorp (nth 1 map)) (char-table-p (nth 1 map)) (error "The initialization of isearch-mode-map must be updated")) ;; Make all multibyte characters search for themselves. (set-char-table-range (nth 1 map) (cons #x100 #x2FFFFF) 'isearch-printing-char) ;; Make function keys, etc, exit the search. (define-key map [t] 'isearch-other-control-char) ;; Control chars, by default, end isearch mode transparently. ;; We need these explicit definitions because, in a dense keymap, ;; the binding for t does not affect characters. ;; We use a dense keymap to save space. (while (< i ?\ ) (define-key map (make-string 1 i) 'isearch-other-control-char) (setq i (1+ i))) ;; Single-byte printing chars extend the search string by default. (setq i ?\ ) (while (< i 256) (define-key map (vector i) 'isearch-printing-char) (setq i (1+ i))) ;; To handle local bindings with meta char prefix keys, define ;; another full keymap. This must be done for any other prefix ;; keys as well, one full keymap per char of the prefix key. It ;; would be simpler to disable the global keymap, and/or have a ;; default local key binding for any key not otherwise bound. (let ((meta-map (make-sparse-keymap))) (define-key map (char-to-string meta-prefix-char) meta-map) (define-key map [escape] meta-map)) (define-key map (vector meta-prefix-char t) 'isearch-other-meta-char) ;; Several non-printing chars change the searching behavior. (define-key map "\C-s" 'isearch-repeat-forward) (define-key map "\C-r" 'isearch-repeat-backward) ;; Define M-C-s and M-C-r like C-s and C-r so that the same key ;; combinations can be used to repeat regexp isearches that can ;; be used to start these searches. (define-key map "\M-\C-s" 'isearch-repeat-forward) (define-key map "\M-\C-r" 'isearch-repeat-backward) (define-key map "\177" 'isearch-delete-char) (define-key map "\C-g" 'isearch-abort) ;; This assumes \e is the meta-prefix-char. (or (= ?\e meta-prefix-char) (error "Inconsistency in isearch.el")) (define-key map "\e\e\e" 'isearch-cancel) (define-key map [escape escape escape] 'isearch-cancel) (define-key map "\C-q" 'isearch-quote-char) (define-key map "\r" 'isearch-exit) (define-key map "\C-j" 'isearch-printing-char) (define-key map "\t" 'isearch-printing-char) (define-key map " " 'isearch-whitespace-chars) (define-key map [?\S-\ ] 'isearch-whitespace-chars) (define-key map "\C-w" 'isearch-yank-word-or-char) (define-key map "\C-y" 'isearch-yank-line) ;; Define keys for regexp chars * ? |. ;; Nothing special for + because it matches at least once. (define-key map "*" 'isearch-*-char) (define-key map "?" 'isearch-*-char) (define-key map "|" 'isearch-|-char) ;;; Turned off because I find I expect to get the global definition--rms. ;;; ;; Instead bind C-h to special help command for isearch-mode. ;;; (define-key map "\C-h" 'isearch-mode-help) (define-key map "\M-n" 'isearch-ring-advance) (define-key map "\M-p" 'isearch-ring-retreat) (define-key map "\M-y" 'isearch-yank-kill) (define-key map "\M-\t" 'isearch-complete) ;; Pass frame events transparently so they won't exit the search. ;; In particular, if we have more than one display open, then a ;; switch-frame might be generated by someone typing at another keyboard. (define-key map [switch-frame] nil) (define-key map [delete-frame] nil) (define-key map [iconify-frame] nil) (define-key map [make-frame-visible] nil) (define-key map [mouse-movement] nil) ;; For searching multilingual text. (define-key map "\C-\\" 'isearch-toggle-input-method) (define-key map "\C-^" 'isearch-toggle-specified-input-method) ;; People expect to be able to paste with the mouse. (define-key map [mouse-2] #'isearch-mouse-2) (define-key map [down-mouse-2] nil) ;; Some bindings you may want to put in your isearch-mode-hook. ;; Suggest some alternates... (define-key map "\M-c" 'isearch-toggle-case-fold) (define-key map "\M-r" 'isearch-toggle-regexp) (define-key map "\M-e" 'isearch-edit-string) map) "Keymap for `isearch-mode'.") (defvar minibuffer-local-isearch-map (let ((map (make-sparse-keymap))) (set-keymap-parent map minibuffer-local-map) (define-key map "\r" 'isearch-nonincremental-exit-minibuffer) (define-key map "\M-n" 'isearch-ring-advance-edit) (define-key map "\M-p" 'isearch-ring-retreat-edit) (define-key map "\M-\t" 'isearch-complete-edit) (define-key map "\C-s" 'isearch-forward-exit-minibuffer) (define-key map "\C-r" 'isearch-reverse-exit-minibuffer) map) "Keymap for editing isearch strings in the minibuffer.") ;; Internal variables declared globally for byte-compiler. ;; These are all set with setq while isearching ;; and bound locally while editing the search string. (defvar isearch-forward nil) ; Searching in the forward direction. (defvar isearch-regexp nil) ; Searching for a regexp. (defvar isearch-word nil) ; Searching for words. (defvar isearch-cmds nil) ; Stack of search status sets. (defvar isearch-string "") ; The current search string. (defvar isearch-message "") ; text-char-description version of isearch-string (defvar isearch-success t) ; Searching is currently successful. (defvar isearch-invalid-regexp nil) ; Regexp not well formed. (defvar isearch-within-brackets nil) ; Regexp has unclosed [. (defvar isearch-other-end nil) ; Start (end) of match if forward (backward). (defvar isearch-wrapped nil) ; Searching restarted from the top (bottom). (defvar isearch-barrier 0) (defvar isearch-just-started nil) (defvar isearch-start-hscroll 0) ; hscroll when starting the search. ; case-fold-search while searching. ; either nil, t, or 'yes. 'yes means the same as t except that mixed ; case in the search string is ignored. (defvar isearch-case-fold-search nil) (defvar isearch-last-case-fold-search nil) ;; Used to save default value while isearch is active (defvar isearch-original-minibuffer-message-timeout nil) (defvar isearch-adjusted nil) (defvar isearch-slow-terminal-mode nil) ;;; If t, using a small window. (defvar isearch-small-window nil) (defvar isearch-opoint 0) ;;; The window configuration active at the beginning of the search. (defvar isearch-window-configuration nil) ;; Flag to indicate a yank occurred, so don't move the cursor. (defvar isearch-yank-flag nil) ;;; A function to be called after each input character is processed. ;;; (It is not called after characters that exit the search.) ;;; It is only set from an optional argument to `isearch-mode'. (defvar isearch-op-fun nil) ;;; Is isearch-mode in a recursive edit for modal searching. (defvar isearch-recursive-edit nil) ;;; Should isearch be terminated after doing one search? (defvar isearch-nonincremental nil) ;; New value of isearch-forward after isearch-edit-string. (defvar isearch-new-forward nil) ;; Accumulate here the overlays opened during searching. (defvar isearch-opened-overlays nil) ;; The value of input-method-function when isearch is invoked. (defvar isearch-input-method-function nil) ;; A flag to tell if input-method-function is locally bound when ;; isearch is invoked. (defvar isearch-input-method-local-p nil) ;; Minor-mode-alist changes - kind of redundant with the ;; echo area, but if isearching in multiple windows, it can be useful. (or (assq 'isearch-mode minor-mode-alist) (nconc minor-mode-alist (list '(isearch-mode isearch-mode)))) (defvar isearch-mode nil) ;; Name of the minor mode, if non-nil. (make-variable-buffer-local 'isearch-mode) (define-key global-map "\C-s" 'isearch-forward) (define-key esc-map "\C-s" 'isearch-forward-regexp) (define-key global-map "\C-r" 'isearch-backward) (define-key esc-map "\C-r" 'isearch-backward-regexp) ;;; Entry points to isearch-mode. (defun isearch-forward (&optional regexp-p no-recursive-edit) "\ Do incremental search forward. With a prefix argument, do an incremental regular expression search instead. \\<isearch-mode-map> As you type characters, they add to the search string and are found. The following non-printing keys are bound in `isearch-mode-map'. Type \\[isearch-delete-char] to cancel characters from end of search string. Type \\[isearch-exit] to exit, leaving point at location found. Type LFD (C-j) to match end of line. Type \\[isearch-repeat-forward] to search again forward,\ \\[isearch-repeat-backward] to search again backward. Type \\[isearch-yank-word-or-char] to yank word from buffer onto end of search\ string and search for it. Type \\[isearch-yank-line] to yank rest of line onto end of search string\ and search for it. Type \\[isearch-yank-kill] to yank last killed text onto end of search string\ and search for it. Type \\[isearch-quote-char] to quote control character to search for it. \\[isearch-abort] while searching or when search has failed cancels input\ back to what has been found successfully. \\[isearch-abort] when search is successful aborts and moves point to\ starting point. Type \\[isearch-toggle-case-fold] to toggle search case-sensitivity. Type \\[isearch-toggle-regexp] to toggle regular-expression mode. Type \\[isearch-edit-string] to edit the search string in the minibuffer. Also supported is a search ring of the previous 16 search strings. Type \\[isearch-ring-advance] to search for the next item in the search ring. Type \\[isearch-ring-retreat] to search for the previous item in the search\ ring. Type \\[isearch-complete] to complete the search string using the search ring. If an input method is turned on in the current buffer, that input method is also active while you are typing a characters to search. To toggle the input method, type \\[isearch-toggle-input-method]. It also toggles the input method in the current buffer. To use a different input method for searching, type \\[isearch-toggle-specified-input-method], and specify an input method you want to use. The above keys, bound in `isearch-mode-map', are often controlled by options; do M-x apropos on search-.* to find them. Other control and meta characters terminate the search and are then executed normally (depending on `search-exit-option'). Likewise for function keys and mouse button events. If this function is called non-interactively, it does not return to the calling function until the search is done." (interactive "P\np") (isearch-mode t (not (null regexp-p)) nil (not no-recursive-edit))) (defun isearch-forward-regexp (&optional not-regexp no-recursive-edit) "\ Do incremental search forward for regular expression. With a prefix argument, do a regular string search instead. Like ordinary incremental search except that your input is treated as a regexp. See \\[isearch-forward] for more info." (interactive "P\np") (isearch-mode t (null not-regexp) nil (not no-recursive-edit))) (defun isearch-backward (&optional regexp-p no-recursive-edit) "\ Do incremental search backward. With a prefix argument, do a regular expression search instead. See \\[isearch-forward] for more information." (interactive "P\np") (isearch-mode nil (not (null regexp-p)) nil (not no-recursive-edit))) (defun isearch-backward-regexp (&optional not-regexp no-recursive-edit) "\ Do incremental search backward for regular expression. With a prefix argument, do a regular string search instead. Like ordinary incremental search except that your input is treated as a regexp. See \\[isearch-forward] for more info." (interactive "P\np") (isearch-mode nil (null not-regexp) nil (not no-recursive-edit))) (defun isearch-mode-help () (interactive) (describe-function 'isearch-forward) (isearch-update)) ;; isearch-mode only sets up incremental search for the minor mode. ;; All the work is done by the isearch-mode commands. ;; Not used yet: ;;(defvar isearch-commands '(isearch-forward isearch-backward ;; isearch-forward-regexp isearch-backward-regexp) ;; "List of commands for which isearch-mode does not recursive-edit.") (defun isearch-mode (forward &optional regexp op-fun recursive-edit word-p) "Start isearch minor mode. Called by `isearch-forward', etc. \\{isearch-mode-map}" ;; Initialize global vars. (setq isearch-forward forward isearch-regexp regexp isearch-word word-p isearch-op-fun op-fun isearch-last-case-fold-search isearch-case-fold-search isearch-case-fold-search case-fold-search isearch-string "" isearch-message "" isearch-cmds nil isearch-success t isearch-wrapped nil isearch-barrier (point) isearch-adjusted nil isearch-yank-flag nil isearch-invalid-regexp nil isearch-within-brackets nil isearch-slow-terminal-mode (and (<= baud-rate search-slow-speed) (> (window-height) (* 4 (abs search-slow-window-lines)))) isearch-other-end nil isearch-small-window nil isearch-just-started t isearch-start-hscroll (window-hscroll) isearch-opoint (point) search-ring-yank-pointer nil isearch-opened-overlays nil isearch-input-method-function input-method-function isearch-input-method-local-p (local-variable-p 'input-method-function) regexp-search-ring-yank-pointer nil ;; Save the original value of `minibuffer-message-timeout', and ;; set it to nil so that isearch's messages don't get timed out. isearch-original-minibuffer-message-timeout minibuffer-message-timeout minibuffer-message-timeout nil) ;; We must bypass input method while reading key. When a user type ;; printable character, appropriate input method is turned on in ;; minibuffer to read multibyte characters. (or isearch-input-method-local-p (make-local-variable 'input-method-function)) (setq input-method-function nil) (looking-at "") (setq isearch-window-configuration (if isearch-slow-terminal-mode (current-window-configuration) nil)) ;; Maybe make minibuffer frame visible and/or raise it. (let ((frame (window-frame (minibuffer-window)))) (if (not (memq (frame-live-p frame) '(nil t))) (progn (make-frame-visible frame) (if minibuffer-auto-raise (raise-frame frame))))) (setq isearch-mode " Isearch") ;; forward? regexp? (force-mode-line-update) (isearch-push-state) (setq overriding-terminal-local-map isearch-mode-map) (isearch-update) (run-hooks 'isearch-mode-hook) (add-hook 'mouse-leave-buffer-hook 'isearch-done) (add-hook 'kbd-macro-termination-hook 'isearch-done) ;; isearch-mode can be made modal (in the sense of not returning to ;; the calling function until searching is completed) by entering ;; a recursive-edit and exiting it when done isearching. (if recursive-edit (let ((isearch-recursive-edit t)) (recursive-edit))) isearch-success) ;; Some high level utilities. Others below. (defun isearch-update () ;; Called after each command to update the display. (if (and (null unread-command-events) (null executing-kbd-macro)) (progn (if (not (input-pending-p)) (isearch-message)) (if (and isearch-slow-terminal-mode (not (or isearch-small-window (pos-visible-in-window-p)))) (let ((found-point (point))) (setq isearch-small-window t) (move-to-window-line 0) (let ((window-min-height 1)) (split-window nil (if (< search-slow-window-lines 0) (1+ (- search-slow-window-lines)) (- (window-height) (1+ search-slow-window-lines))))) (if (< search-slow-window-lines 0) (progn (vertical-motion (- 1 search-slow-window-lines)) (set-window-start (next-window) (point)) (set-window-hscroll (next-window) (window-hscroll)) (set-window-hscroll (selected-window) 0)) (other-window 1)) (goto-char found-point)) ;; Keep same hscrolling as at the start of the search when possible (let ((current-scroll (window-hscroll))) (set-window-hscroll (selected-window) isearch-start-hscroll) (unless (pos-visible-in-window-p) (set-window-hscroll (selected-window) current-scroll)))) (if isearch-other-end (if (< isearch-other-end (point)) ; isearch-forward? (isearch-highlight isearch-other-end (point)) (isearch-highlight (point) isearch-other-end)) (isearch-dehighlight nil)) )) (setq ;; quit-flag nil not for isearch-mode isearch-adjusted nil isearch-yank-flag nil) (isearch-lazy-highlight-new-loop) ;; We must prevent the point moving to the end of composition when a ;; part of the composition has just been searched. (setq disable-point-adjustment t)) (defun isearch-done (&optional nopush edit) (if isearch-resume-enabled (let ((command `(isearch-resume ,isearch-string ,isearch-regexp ,isearch-word ,isearch-forward ,isearch-message ',isearch-case-fold-search))) (unless (equal (car command-history) command) (setq command-history (cons command command-history))))) (remove-hook 'mouse-leave-buffer-hook 'isearch-done) (remove-hook 'kbd-macro-termination-hook 'isearch-done) (setq isearch-lazy-highlight-start nil) ;; Called by all commands that terminate isearch-mode. ;; If NOPUSH is non-nil, we don't push the string on the search ring. (setq overriding-terminal-local-map nil) ;; (setq pre-command-hook isearch-old-pre-command-hook) ; for lemacs (setq minibuffer-message-timeout isearch-original-minibuffer-message-timeout) (isearch-dehighlight t) (isearch-lazy-highlight-cleanup isearch-lazy-highlight-cleanup) (let ((found-start (window-start (selected-window))) (found-point (point))) (if isearch-window-configuration (set-window-configuration isearch-window-configuration)) (if isearch-small-window (goto-char found-point) ;; Exiting the save-window-excursion clobbers window-start; restore it. (set-window-start (selected-window) found-start t)) ;; If there was movement, mark the starting position. ;; Maybe should test difference between and set mark iff > threshold. (if (/= (point) isearch-opoint) (or (and transient-mark-mode mark-active) (progn (push-mark isearch-opoint t) (or executing-kbd-macro (> (minibuffer-depth) 0) (message "Mark saved where search started")))))) (setq isearch-mode nil) (if isearch-input-method-local-p (setq input-method-function isearch-input-method-function) (kill-local-variable 'input-method-function)) (force-mode-line-update) ;; If we ended in the middle of some intangible text, ;; move to the further end of that intangible text. (let ((after (if (eobp) nil (get-text-property (point) 'intangible))) (before (if (bobp) nil (get-text-property (1- (point)) 'intangible)))) (when (and before after (eq before after)) (if isearch-forward (goto-char (next-single-property-change (point) 'intangible)) (goto-char (previous-single-property-change (point) 'intangible))))) (if (and (> (length isearch-string) 0) (not nopush)) ;; Update the ring data. (isearch-update-ring isearch-string isearch-regexp)) (run-hooks 'isearch-mode-end-hook) (and (not edit) isearch-recursive-edit (exit-recursive-edit))) (defun isearch-update-ring (string &optional regexp) "Add STRING to the beginning of the search ring. REGEXP says which ring to use." (if regexp (if (or (null regexp-search-ring) (not (string= string (car regexp-search-ring)))) (progn (setq regexp-search-ring (cons string regexp-search-ring)) (if (> (length regexp-search-ring) regexp-search-ring-max) (setcdr (nthcdr (1- search-ring-max) regexp-search-ring) nil)))) (if (or (null search-ring) (not (string= string (car search-ring)))) (progn (setq search-ring (cons string search-ring)) (if (> (length search-ring) search-ring-max) (setcdr (nthcdr (1- search-ring-max) search-ring) nil)))))) ;;; Switching buffers should first terminate isearch-mode. ;;; ;; For Emacs 19, the frame switch event is handled. ;;; (defun isearch-switch-frame-handler () ;;; (interactive) ;; Is this necessary? ;;; ;; First terminate isearch-mode. ;;; (isearch-done) ;;; (isearch-clean-overlays) ;;; (handle-switch-frame (car (cdr last-command-char)))) ;; Commands active while inside of the isearch minor mode. (defun isearch-exit () "Exit search normally. However, if this is the first command after starting incremental search and `search-nonincremental-instead' is non-nil, do a nonincremental search instead via `isearch-edit-string'." (interactive) (if (and search-nonincremental-instead (= 0 (length isearch-string))) (let ((isearch-nonincremental t)) (isearch-edit-string))) (isearch-done) (isearch-clean-overlays)) (defun isearch-edit-string () "Edit the search string in the minibuffer. The following additional command keys are active while editing. \\<minibuffer-local-isearch-map> \\[exit-minibuffer] to resume incremental searching with the edited string. \\[isearch-nonincremental-exit-minibuffer] to do one nonincremental search. \\[isearch-forward-exit-minibuffer] to resume isearching forward. \\[isearch-reverse-exit-minibuffer] to resume isearching backward. \\[isearch-ring-advance-edit] to replace the search string with the next item in the search ring. \\[isearch-ring-retreat-edit] to replace the search string with the previous item in the search ring. \\[isearch-complete-edit] to complete the search string using the search ring. \\<isearch-mode-map> If first char entered is \\[isearch-yank-word-or-char], then do word search instead." ;; This code is very hairy for several reasons, explained in the code. ;; Mainly, isearch-mode must be terminated while editing and then restarted. ;; If there were a way to catch any change of buffer from the minibuffer, ;; this could be simplified greatly. ;; Editing doesn't back up the search point. Should it? (interactive) (condition-case err (progn (let ((isearch-nonincremental isearch-nonincremental) ;; Locally bind all isearch global variables to protect them ;; from recursive isearching. ;; isearch-string -message and -forward are not bound ;; so they may be changed. Instead, save the values. (isearch-new-string isearch-string) (isearch-new-message isearch-message) (isearch-new-forward isearch-forward) (isearch-new-word isearch-word) (isearch-regexp isearch-regexp) (isearch-op-fun isearch-op-fun) (isearch-cmds isearch-cmds) (isearch-success isearch-success) (isearch-wrapped isearch-wrapped) (isearch-barrier isearch-barrier) (isearch-adjusted isearch-adjusted) (isearch-yank-flag isearch-yank-flag) (isearch-invalid-regexp isearch-invalid-regexp) (isearch-within-brackets isearch-within-brackets) ;;; Don't bind this. We want isearch-search, below, to set it. ;;; And the old value won't matter after that. ;;; (isearch-other-end isearch-other-end) ;;; Perhaps some of these other variables should be bound for a ;;; shorter period, ending before the next isearch-search. ;;; But there doesn't seem to be a real bug, so let's not risk it now. (isearch-opoint isearch-opoint) (isearch-slow-terminal-mode isearch-slow-terminal-mode) (isearch-small-window isearch-small-window) (isearch-recursive-edit isearch-recursive-edit) ;; Save current configuration so we can restore it here. (isearch-window-configuration (current-window-configuration)) ;; Temporarily restore `minibuffer-message-timeout'. (minibuffer-message-timeout isearch-original-minibuffer-message-timeout) (isearch-original-minibuffer-message-timeout isearch-original-minibuffer-message-timeout) ) ;; Actually terminate isearching until editing is done. ;; This is so that the user can do anything without failure, ;; like switch buffers and start another isearch, and return. (condition-case err (isearch-done t t) (exit nil)) ; was recursive editing (isearch-message) ;; for read-char (unwind-protect (let* (;; Why does following read-char echo? ;;(echo-keystrokes 0) ;; not needed with above message (e (let ((cursor-in-echo-area t)) (read-event))) ;; Binding minibuffer-history-symbol to nil is a work-around ;; for some incompatibility with gmhist. (minibuffer-history-symbol) (message-log-max nil)) ;; If the first character the user types when we prompt them ;; for a string is the yank-word character, then go into ;; word-search mode. Otherwise unread that character and ;; read a key the normal way. ;; Word search does not apply (yet) to regexp searches, ;; no check is made here. (message (isearch-message-prefix nil nil t)) (if (memq (lookup-key isearch-mode-map (vector e)) '(isearch-yank-word isearch-yank-word-or-char)) (setq isearch-word t;; so message-prefix is right isearch-new-word t) (cancel-kbd-macro-events) (isearch-unread e)) (setq cursor-in-echo-area nil) (setq isearch-new-string (let (junk-ring) (read-from-minibuffer (isearch-message-prefix nil nil isearch-nonincremental) isearch-string minibuffer-local-isearch-map nil 'junk-ring)) isearch-new-message (mapconcat 'isearch-text-char-description isearch-new-string ""))) ;; Always resume isearching by restarting it. (isearch-mode isearch-forward isearch-regexp isearch-op-fun nil isearch-word) ;; Copy new local values to isearch globals (setq isearch-string isearch-new-string isearch-message isearch-new-message isearch-forward isearch-new-forward isearch-word isearch-new-word)) ;; Empty isearch-string means use default. (if (= 0 (length isearch-string)) (setq isearch-string (or (car (if isearch-regexp regexp-search-ring search-ring)) "") isearch-message (mapconcat 'isearch-text-char-description isearch-string "")) ;; This used to set the last search string, ;; but I think it is not right to do that here. ;; Only the string actually used should be saved. )) ;; Push the state as of before this C-s. (isearch-push-state) ;; Reinvoke the pending search. (isearch-search) (isearch-update) (if isearch-nonincremental (progn ;; (sit-for 1) ;; needed if isearch-done does: (message "") (isearch-done)))) (quit ; handle abort-recursive-edit (isearch-abort) ;; outside of let to restore outside global values ))) (defun isearch-nonincremental-exit-minibuffer () (interactive) (setq isearch-nonincremental t) (exit-minibuffer)) (defun isearch-forward-exit-minibuffer () (interactive) (setq isearch-new-forward t) (exit-minibuffer)) (defun isearch-reverse-exit-minibuffer () (interactive) (setq isearch-new-forward nil) (exit-minibuffer)) (defun isearch-cancel () "Terminate the search and go back to the starting point." (interactive) (goto-char isearch-opoint) (isearch-done t) (isearch-clean-overlays) (signal 'quit nil)) ; and pass on quit signal (defun isearch-abort () "Abort incremental search mode if searching is successful, signaling quit. Otherwise, revert to previous successful search and continue searching. Use `isearch-exit' to quit without signaling." (interactive) ;; (ding) signal instead below, if quitting (discard-input) (if isearch-success ;; If search is successful, move back to starting point ;; and really do quit. (progn (goto-char isearch-opoint) (setq isearch-success nil) (isearch-done t) ; exit isearch (isearch-clean-overlays) (signal 'quit nil)) ; and pass on quit signal ;; If search is failing, or has an incomplete regexp, ;; rub out until it is once more successful. (while (or (not isearch-success) isearch-invalid-regexp) (isearch-pop-state)) (isearch-update))) (defun isearch-repeat (direction) ;; Utility for isearch-repeat-forward and -backward. (if (eq isearch-forward (eq direction 'forward)) ;; C-s in forward or C-r in reverse. (if (equal isearch-string "") ;; If search string is empty, use last one. (setq isearch-string (or (if isearch-regexp (car regexp-search-ring) (car search-ring)) "") isearch-message (mapconcat 'isearch-text-char-description isearch-string "") isearch-case-fold-search isearch-last-case-fold-search) ;; If already have what to search for, repeat it. (or isearch-success (progn (goto-char (if isearch-forward (point-min) (point-max))) (setq isearch-wrapped t)))) ;; C-s in reverse or C-r in forward, change direction. (setq isearch-forward (not isearch-forward))) (setq isearch-barrier (point)) ; For subsequent \| if regexp. (if (equal isearch-string "") (setq isearch-success t) (if (and isearch-success (equal (match-end 0) (match-beginning 0)) (not isearch-just-started)) ;; If repeating a search that found ;; an empty string, ensure we advance. (if (if isearch-forward (eobp) (bobp)) ;; If there's nowhere to advance to, fail (and wrap next time). (progn (setq isearch-success nil) (ding)) (forward-char (if isearch-forward 1 -1)) (isearch-search)) (isearch-search))) (isearch-push-state) (isearch-update)) (defun isearch-repeat-forward () "Repeat incremental search forwards." (interactive) (isearch-repeat 'forward)) (defun isearch-repeat-backward () "Repeat incremental search backwards." (interactive) (isearch-repeat 'backward)) (defun isearch-toggle-regexp () "Toggle regexp searching on or off." ;; The status stack is left unchanged. (interactive) (setq isearch-regexp (not isearch-regexp)) (if isearch-regexp (setq isearch-word nil)) (isearch-update)) (defun isearch-toggle-case-fold () "Toggle case folding in searching on or off." (interactive) (setq isearch-case-fold-search (if isearch-case-fold-search nil 'yes)) (let ((message-log-max nil)) (message "%s%s [case %ssensitive]" (isearch-message-prefix nil nil isearch-nonincremental) isearch-message (if isearch-case-fold-search "in" ""))) (setq isearch-adjusted t) (sit-for 1) (isearch-update)) (defun isearch-delete-char () "Discard last input item and move point back. If no previous match was done, just beep." (interactive) (if (null (cdr isearch-cmds)) (ding) (isearch-pop-state)) (isearch-update)) (defun isearch-yank-string (string) "Pull STRING into search string." ;; Downcase the string if not supposed to case-fold yanked strings. (if (and isearch-case-fold-search (eq 'not-yanks search-upper-case)) (setq string (downcase string))) (if isearch-regexp (setq string (regexp-quote string))) (setq isearch-string (concat isearch-string string) isearch-message (concat isearch-message (mapconcat 'isearch-text-char-description string "")) ;; Don't move cursor in reverse search. isearch-yank-flag t) (isearch-search-and-update)) (defun isearch-yank-kill () "Pull string from kill ring into search string." (interactive) (isearch-yank-string (current-kill 0))) (defun isearch-yank-x-selection () "Pull current X selection into search string." (interactive) (isearch-yank-string (x-get-selection))) (defun isearch-mouse-2 (click arg) "Handle mouse-2 in Isearch mode. For a click in the echo area, invoke `isearch-yank-x-selection'. Otherwise invoke whatever mouse-2 is bound to outside of Isearch." (interactive "e\nP") (let* ((w (posn-window (event-start click))) (overriding-terminal-local-map nil) (key (vector (event-basic-type click))) (binding (key-binding key))) (if (and (window-minibuffer-p w) (not (minibuffer-window-active-p w))) ; in echo area (isearch-yank-x-selection) (when binding ;; Kluge to allow passing ARG to functions that support it, ;; like mouse-yank-at-click. (if (equal (cadr (interactive-form binding)) "e\nP") (funcall binding click arg) (funcall binding click)))))) (defun isearch-yank-internal (jumpform) "Pull the text from point to the point reached by JUMPFORM. JUMPFORM is a lambda expression that takes no arguments and returns a buffer position, possibly having moved point to that position. For example, it might move point forward by a word and return point, or it might return the position of the end of the line." (isearch-yank-string (save-excursion (and (not isearch-forward) isearch-other-end (goto-char isearch-other-end)) (buffer-substring-no-properties (point) (funcall jumpform))))) (defun isearch-yank-char () "Pull next letter from buffer into search string." (interactive) (isearch-yank-internal (lambda () (forward-char 1) (point)))) (defun isearch-yank-word-or-char () "Pull next character or word from buffer into search string." (interactive) (isearch-yank-internal (lambda () (if (or (= (char-syntax (or (char-after) 0)) ?w) (= (char-syntax (or (char-after (1+ (point))) 0)) ?w)) (forward-word 1) (forward-char 1)) (point)))) (defun isearch-yank-word () "Pull next word from buffer into search string." (interactive) (isearch-yank-internal (lambda () (forward-word 1) (point)))) (defun isearch-yank-line () "Pull rest of line from buffer into search string." (interactive) (isearch-yank-internal (lambda () (line-end-position)))) (defun isearch-search-and-update () ;; Do the search and update the display. (if (and (not isearch-success) ;; unsuccessful regexp search may become ;; successful by addition of characters which ;; make isearch-string valid (not isearch-regexp)) nil ;; In reverse search, adding stuff at ;; the end may cause zero or many more chars to be ;; matched, in the string following point. ;; Allow all those possibilities without moving point as ;; long as the match does not extend past search origin. (if (and (not isearch-forward) (not isearch-adjusted) (condition-case () (let ((case-fold-search isearch-case-fold-search)) (if (and (eq case-fold-search t) search-upper-case) (setq case-fold-search (isearch-no-upper-case-p isearch-string isearch-regexp))) (looking-at (if isearch-regexp isearch-string (regexp-quote isearch-string)))) (error nil)) (or isearch-yank-flag (<= (match-end 0) (min isearch-opoint isearch-barrier)))) (progn (setq isearch-success t isearch-invalid-regexp nil isearch-within-brackets nil isearch-other-end (match-end 0)) (if (and (eq isearch-case-fold-search t) search-upper-case) (setq isearch-case-fold-search (isearch-no-upper-case-p isearch-string isearch-regexp)))) ;; Not regexp, not reverse, or no match at point. (if (and isearch-other-end (not isearch-adjusted)) (goto-char (if isearch-forward isearch-other-end (min isearch-opoint isearch-barrier (1+ isearch-other-end))))) (isearch-search) )) (isearch-push-state) (if isearch-op-fun (funcall isearch-op-fun)) (isearch-update)) ;; *, ?, and | chars can make a regexp more liberal. ;; They can make a regexp match sooner or make it succeed instead of failing. ;; So go back to place last successful search started ;; or to the last ^S/^R (barrier), whichever is nearer. ;; + needs no special handling because the string must match at least once. (defun isearch-*-char () "Handle * and ? specially in regexps." (interactive) (if isearch-regexp (let ((idx (length isearch-string))) (while (and (> idx 0) (eq (aref isearch-string (1- idx)) ?\\)) (setq idx (1- idx))) (when (= (mod (- (length isearch-string) idx) 2) 0) (setq isearch-adjusted t) ;; Get the isearch-other-end from before the last search. ;; We want to start from there, ;; so that we don't retreat farther than that. ;; (car isearch-cmds) is after last search; ;; (car (cdr isearch-cmds)) is from before it. (let ((cs (nth 5 (car (cdr isearch-cmds))))) (setq cs (or cs isearch-barrier)) (goto-char (if isearch-forward (max cs isearch-barrier) (min cs isearch-barrier))))))) (isearch-process-search-char last-command-char)) (defun isearch-|-char () "If in regexp search, jump to the barrier." (interactive) (if isearch-regexp (progn (setq isearch-adjusted t) (goto-char isearch-barrier))) (isearch-process-search-char last-command-char)) (defalias 'isearch-other-control-char 'isearch-other-meta-char) (defun isearch-other-meta-char () "Exit the search normally and reread this key sequence. But only if `search-exit-option' is non-nil, the default. If it is the symbol `edit', the search string is edited in the minibuffer and the meta character is unread so that it applies to editing the string." (interactive) (let* ((key (this-command-keys)) (main-event (aref key 0)) (keylist (listify-key-sequence key))) (cond ((and (= (length key) 1) (let ((lookup (lookup-key function-key-map key))) (not (or (null lookup) (integerp lookup) (keymapp lookup))))) ;; Handle a function key that translates into something else. ;; If the key has a global definition too, ;; exit and unread the key itself, so its global definition runs. ;; Otherwise, unread the translation, ;; so that the translated key takes effect within isearch. (cancel-kbd-macro-events) (if (lookup-key global-map key) (progn (isearch-done) (apply 'isearch-unread keylist)) (setq keylist (listify-key-sequence (lookup-key function-key-map key))) (while keylist (setq key (car keylist)) ;; If KEY is a printing char, we handle it here ;; directly to avoid the input method and keyboard ;; coding system translating it. (if (and (integerp key) (>= key ?\ ) (/= key 127) (< key 256)) (progn (isearch-process-search-char key) (setq keylist (cdr keylist))) ;; As the remaining keys in KEYLIST can't be handled ;; here, we must reread them. (apply 'isearch-unread keylist) (setq keylist nil))))) ( ;; Handle an undefined shifted control character ;; by downshifting it if that makes it defined. ;; (As read-key-sequence would normally do, ;; if we didn't have a default definition.) (let ((mods (event-modifiers main-event))) (and (integerp main-event) (memq 'shift mods) (memq 'control mods) (lookup-key isearch-mode-map (let ((copy (copy-sequence key))) (aset copy 0 (- main-event (- ?\C-\S-a ?\C-a))) copy) nil))) (setcar keylist (- main-event (- ?\C-\S-a ?\C-a))) (cancel-kbd-macro-events) (apply 'isearch-unread keylist)) ((eq search-exit-option 'edit) (apply 'isearch-unread keylist) (isearch-edit-string)) (search-exit-option (let (window) (cancel-kbd-macro-events) (apply 'isearch-unread keylist) ;; Properly handle scroll-bar and mode-line clicks for ;; which a dummy prefix event was generated as (aref key ;; 0). Note that we don't have to modify the event ;; anymore in 21 because read_key_sequence no longer modifies ;; events to produce fake prefix keys. (when (and (> (length key) 1) (symbolp (aref key 0)) (listp (aref key 1)) (not (numberp (posn-point (event-start (aref key 1)))))) (pop unread-command-events) (setq main-event (car unread-command-events))) ;; If we got a mouse click event, that event contains the ;; window clicked on. maybe it was read with the buffer ;; it was clicked on. If so, that buffer, not the current one, ;; is in isearch mode. So end the search in that buffer. ;; ??? I have no idea what this if checks for, but it's ;; obviously wrong for the case that a down-mouse event ;; on another window invokes this function. The event ;; will contain the window clicked on and that window's ;; buffer is certainaly not always in Isearch mode. ;; ;; Leave the code in, but check for current buffer not ;; being in Isearch mode for now, until someone tells ;; what it's really supposed to do. ;; ;; --gerd 2001-08-10. (if (and (not isearch-mode) (listp main-event) (setq window (posn-window (event-start main-event))) (windowp window) (or (> (minibuffer-depth) 0) (not (window-minibuffer-p window)))) (save-excursion (set-buffer (window-buffer window)) (isearch-done) (isearch-clean-overlays)) (isearch-done) (isearch-clean-overlays)))) (t;; otherwise nil (isearch-process-search-string key key))))) (defun isearch-quote-char () "Quote special characters for incremental search." (interactive) (let ((char (read-quoted-char (isearch-message t)))) ;; Assume character codes 0200 - 0377 stand for characters in some ;; single-byte character set, and convert them to Emacs ;; characters. (and enable-multibyte-characters (>= char ?\200) (<= char ?\377) (setq char (unibyte-char-to-multibyte char))) (isearch-process-search-char char))) (defun isearch-return-char () "Convert return into newline for incremental search. Obsolete." (interactive) (isearch-process-search-char ?\n)) (defun isearch-printing-char () "Add this ordinary printing character to the search string and search." (interactive) (let ((char last-command-char)) (if (= char ?\S-\ ) (setq char ?\ )) (if (and enable-multibyte-characters (>= char ?\200) (<= char ?\377)) (if (keyboard-coding-system) (isearch-process-search-multibyte-characters char) (isearch-process-search-char (unibyte-char-to-multibyte char))) (if current-input-method (isearch-process-search-multibyte-characters char) (isearch-process-search-char char))))) (defun isearch-whitespace-chars () "Match all whitespace chars, if in regexp mode. If you want to search for just a space, type \\<isearch-mode-map>\\[isearch-quote-char] SPC." (interactive) (if isearch-regexp (if (and search-whitespace-regexp (not isearch-within-brackets) (not isearch-invalid-regexp)) (isearch-process-search-string search-whitespace-regexp " ") (isearch-printing-char)) (progn ;; This way of doing word search doesn't correctly extend current search. ;; (setq isearch-word t) ;; (setq isearch-adjusted t) ;; (goto-char isearch-barrier) (isearch-printing-char)))) (defun isearch-process-search-char (char) ;; Append the char to the search string, update the message and re-search. (isearch-process-search-string (char-to-string char) (if (>= char ?\200) (char-to-string char) (isearch-text-char-description char)))) (defun isearch-process-search-string (string message) (setq isearch-string (concat isearch-string string) isearch-message (concat isearch-message message)) (isearch-search-and-update)) ;; Search Ring (defun isearch-ring-adjust1 (advance) ;; Helper for isearch-ring-adjust (let* ((ring (if isearch-regexp regexp-search-ring search-ring)) (length (length ring)) (yank-pointer-name (if isearch-regexp 'regexp-search-ring-yank-pointer 'search-ring-yank-pointer)) (yank-pointer (eval yank-pointer-name))) (if (zerop length) () (set yank-pointer-name (setq yank-pointer (mod (+ (or yank-pointer 0) (if advance -1 1)) length))) (setq isearch-string (nth yank-pointer ring) isearch-message (mapconcat 'isearch-text-char-description isearch-string ""))))) (defun isearch-ring-adjust (advance) ;; Helper for isearch-ring-advance and isearch-ring-retreat (isearch-ring-adjust1 advance) (if search-ring-update (progn (isearch-search) (isearch-update)) (isearch-edit-string) ) (isearch-push-state)) (defun isearch-ring-advance () "Advance to the next search string in the ring." ;; This could be more general to handle a prefix arg, but who would use it. (interactive) (isearch-ring-adjust 'advance)) (defun isearch-ring-retreat () "Retreat to the previous search string in the ring." (interactive) (isearch-ring-adjust nil)) (defun isearch-ring-advance-edit (n) "Insert the next element of the search history into the minibuffer. With prefix arg N, insert the Nth element." (interactive "p") (let* ((yank-pointer-name (if isearch-regexp 'regexp-search-ring-yank-pointer 'search-ring-yank-pointer)) (yank-pointer (eval yank-pointer-name)) (ring (if isearch-regexp regexp-search-ring search-ring)) (length (length ring))) (if (zerop length) () (set yank-pointer-name (setq yank-pointer (mod (- (or yank-pointer 0) n) length))) (delete-field) (insert (nth yank-pointer ring)) (goto-char (point-max))))) (defun isearch-ring-retreat-edit (n) "Insert the previous element of the search history into the minibuffer. With prefix arg N, insert the Nth element." (interactive "p") (isearch-ring-advance-edit (- n))) ;;(defun isearch-ring-adjust-edit (advance) ;; "Use the next or previous search string in the ring while in minibuffer." ;; (isearch-ring-adjust1 advance) ;; (erase-buffer) ;; (insert isearch-string)) ;;(defun isearch-ring-advance-edit () ;; (interactive) ;; (isearch-ring-adjust-edit 'advance)) ;;(defun isearch-ring-retreat-edit () ;; "Retreat to the previous search string in the ring while in the minibuffer." ;; (interactive) ;; (isearch-ring-adjust-edit nil)) (defun isearch-complete1 () ;; Helper for isearch-complete and isearch-complete-edit ;; Return t if completion OK, nil if no completion exists. (let* ((ring (if isearch-regexp regexp-search-ring search-ring)) (alist (mapcar (function (lambda (string) (list string))) ring)) (completion-ignore-case case-fold-search) (completion (try-completion isearch-string alist))) (cond ((eq completion t) ;; isearch-string stays the same t) ((or completion ; not nil, must be a string (= 0 (length isearch-string))) ; shouldn't have to say this (if (equal completion isearch-string) ;; no extension? (progn (if completion-auto-help (with-output-to-temp-buffer "*Isearch completions*" (display-completion-list (all-completions isearch-string alist)))) t) (and completion (setq isearch-string completion)))) (t (message "No completion") ; waits a second if in minibuffer nil)))) (defun isearch-complete () "Complete the search string from the strings on the search ring. The completed string is then editable in the minibuffer. If there is no completion possible, say so and continue searching." (interactive) (if (isearch-complete1) (isearch-edit-string) ;; else (sit-for 1) (isearch-update))) (defun isearch-complete-edit () "Same as `isearch-complete' except in the minibuffer." (interactive) (setq isearch-string (buffer-string)) (if (isearch-complete1) (progn (delete-field) (insert isearch-string)))) ;; The search status stack (and isearch window-local variables, not used). ;; Need a structure for this. (defun isearch-top-state () (let ((cmd (car isearch-cmds))) (setq isearch-string (car cmd) isearch-message (car (cdr cmd)) isearch-success (nth 3 cmd) isearch-forward (nth 4 cmd) isearch-other-end (nth 5 cmd) isearch-word (nth 6 cmd) isearch-invalid-regexp (nth 7 cmd) isearch-wrapped (nth 8 cmd) isearch-barrier (nth 9 cmd) isearch-within-brackets (nth 10 cmd) isearch-case-fold-search (nth 11 cmd)) (goto-char (car (cdr (cdr cmd)))))) (defun isearch-pop-state () (setq isearch-cmds (cdr isearch-cmds)) (isearch-top-state)) (defun isearch-push-state () (setq isearch-cmds (cons (list isearch-string isearch-message (point) isearch-success isearch-forward isearch-other-end isearch-word isearch-invalid-regexp isearch-wrapped isearch-barrier isearch-within-brackets isearch-case-fold-search) isearch-cmds))) ;; Message string (defun isearch-message (&optional c-q-hack ellipsis) ;; Generate and print the message string. (let ((cursor-in-echo-area ellipsis) (m (concat (isearch-message-prefix c-q-hack ellipsis isearch-nonincremental) isearch-message (isearch-message-suffix c-q-hack ellipsis) ))) (if c-q-hack m (let ((message-log-max nil)) (message "%s" m))))) (defun isearch-message-prefix (&optional c-q-hack ellipsis nonincremental) ;; If about to search, and previous search regexp was invalid, ;; check that it still is. If it is valid now, ;; let the message we display while searching say that it is valid. (and isearch-invalid-regexp ellipsis (condition-case () (progn (re-search-forward isearch-string (point) t) (setq isearch-invalid-regexp nil isearch-within-brackets nil)) (error nil))) ;; If currently failing, display no ellipsis. (or isearch-success (setq ellipsis nil)) (let ((m (concat (if isearch-success "" "failing ") (if (and isearch-wrapped (if isearch-forward (> (point) isearch-opoint) (< (point) isearch-opoint))) "over") (if isearch-wrapped "wrapped ") (if isearch-word "word " "") (if isearch-regexp "regexp " "") (if nonincremental "search" "I-search") (if isearch-forward "" " backward") (if current-input-method (concat " [" current-input-method-title "]: ") ": ") ))) (concat (upcase (substring m 0 1)) (substring m 1)))) (defun isearch-message-suffix (&optional c-q-hack ellipsis) (concat (if c-q-hack "^Q" "") (if isearch-invalid-regexp (concat " [" isearch-invalid-regexp "]") ""))) ;;; Searching (defun isearch-search () ;; Do the search with the current search string. (isearch-message nil t) (if (and (eq isearch-case-fold-search t) search-upper-case) (setq isearch-case-fold-search (isearch-no-upper-case-p isearch-string isearch-regexp))) (condition-case lossage (let ((inhibit-point-motion-hooks search-invisible) (inhibit-quit nil) (case-fold-search isearch-case-fold-search) (retry t)) (if isearch-regexp (setq isearch-invalid-regexp nil)) (setq isearch-within-brackets nil) (while retry (setq isearch-success (funcall (cond (isearch-word (if isearch-forward 'word-search-forward 'word-search-backward)) (isearch-regexp (if isearch-forward 're-search-forward 're-search-backward)) (t (if isearch-forward 'search-forward 'search-backward))) isearch-string nil t)) ;; Clear RETRY unless we matched some invisible text ;; and we aren't supposed to do that. (if (or (eq search-invisible t) (not isearch-success) (bobp) (eobp) (= (match-beginning 0) (match-end 0)) (not (isearch-range-invisible (match-beginning 0) (match-end 0)))) (setq retry nil))) (setq isearch-just-started nil) (if isearch-success (setq isearch-other-end (if isearch-forward (match-beginning 0) (match-end 0))))) (quit (isearch-unread ?\C-g) (setq isearch-success nil)) (invalid-regexp (setq isearch-invalid-regexp (car (cdr lossage))) (setq isearch-within-brackets (string-match "\\`Unmatched \\[" isearch-invalid-regexp)) (if (string-match "\\`Premature \\|\\`Unmatched \\|\\`Invalid " isearch-invalid-regexp) (setq isearch-invalid-regexp "incomplete input"))) (error ;; stack overflow in regexp search. (setq isearch-invalid-regexp (format "%s" lossage)))) (if isearch-success nil ;; Ding if failed this time after succeeding last time. (and (nth 3 (car isearch-cmds)) (ding)) (goto-char (nth 2 (car isearch-cmds))))) ;;; Called when opening an overlay, and we are still in isearch. (defun isearch-open-overlay-temporary (ov) (if (not (null (overlay-get ov 'isearch-open-invisible-temporary))) ;; Some modes would want to open the overlays temporary during ;; isearch in their own way, they should set the ;; `isearch-open-invisible-temporary' to a function doing this. (funcall (overlay-get ov 'isearch-open-invisible-temporary) ov nil) ;; Store the values for the `invisible' and `intangible' ;; properties, and then set them to nil. This way the text hidden ;; by this overlay becomes visible. ;; Do we really need to set the `intangible' property to t? Can we ;; have the point inside an overlay with an `intangible' property? ;; In 19.34 this does not exist so I cannot test it. (overlay-put ov 'isearch-invisible (overlay-get ov 'invisible)) (overlay-put ov 'isearch-intangible (overlay-get ov 'intangible)) (overlay-put ov 'invisible nil) (overlay-put ov 'intangible nil))) ;;; This is called at the end of isearch. It will open the overlays ;;; that contain the latest match. Obviously in case of a C-g the ;;; point returns to the original location which surely is not contain ;;; in any of these overlays, se we are safe in this case too. (defun isearch-open-necessary-overlays (ov) (let ((inside-overlay (and (> (point) (overlay-start ov)) (< (point) (overlay-end ov)))) ;; If this exists it means that the overlay was opened using ;; this function, not by us tweaking the overlay properties. (fct-temp (overlay-get ov 'isearch-open-invisible-temporary))) (when (or inside-overlay (not fct-temp)) ;; restore the values for the `invisible' and `intangible' ;; properties (overlay-put ov 'invisible (overlay-get ov 'isearch-invisible)) (overlay-put ov 'intangible (overlay-get ov 'isearch-intangible)) (overlay-put ov 'isearch-invisible nil) (overlay-put ov 'isearch-intangible nil)) (if inside-overlay (funcall (overlay-get ov 'isearch-open-invisible) ov) (if fct-temp (funcall fct-temp ov t))))) ;;; This is called when exiting isearch. It closes the temporary ;;; opened overlays, except the ones that contain the latest match. (defun isearch-clean-overlays () (when isearch-opened-overlays (mapc 'isearch-open-necessary-overlays isearch-opened-overlays) (setq isearch-opened-overlays nil))) (defun isearch-intersects-p (start0 end0 start1 end1) "Return t if regions START0..END0 and START1..END1 intersect." (or (and (>= start0 start1) (< start0 end1)) (and (> end0 start1) (<= end0 end1)) (and (>= start1 start0) (< start1 end0)) (and (> end1 start0) (<= end1 end0)))) ;;; Verify if the current match is outside of each element of ;;; `isearch-opened-overlays', if so close that overlay. (defun isearch-close-unnecessary-overlays (begin end) (let ((overlays isearch-opened-overlays)) (setq isearch-opened-overlays nil) (dolist (ov overlays) (if (isearch-intersects-p begin end (overlay-start ov) (overlay-end ov)) (push ov isearch-opened-overlays) (let ((fct-temp (overlay-get ov 'isearch-open-invisible-temporary))) (if fct-temp ;; If this exists it means that the overlay was opened ;; using this function, not by us tweaking the overlay ;; properties. (funcall fct-temp ov t) (overlay-put ov 'invisible (overlay-get ov 'isearch-invisible)) (overlay-put ov 'intangible (overlay-get ov 'isearch-intangible)) (overlay-put ov 'isearch-invisible nil) (overlay-put ov 'isearch-intangible nil))))))) (defun isearch-range-invisible (beg end) "Return t if all the text from BEG to END is invisible." (and (/= beg end) ;; Check that invisibility runs up to END. (save-excursion (goto-char beg) (let ( ;; can-be-opened keeps track if we can open some overlays. (can-be-opened (eq search-invisible 'open)) ;; the list of overlays that could be opened (crt-overlays nil)) (when (and can-be-opened isearch-hide-immediately) (isearch-close-unnecessary-overlays beg end)) ;; If the following character is currently invisible, ;; skip all characters with that same `invisible' property value. ;; Do that over and over. (while (and (< (point) end) (let ((prop (get-char-property (point) 'invisible))) (if (eq buffer-invisibility-spec t) prop (or (memq prop buffer-invisibility-spec) (assq prop buffer-invisibility-spec))))) (if (get-text-property (point) 'invisible) (progn (goto-char (next-single-property-change (point) 'invisible nil end)) ;; if text is hidden by an `invisible' text property ;; we cannot open it at all. (setq can-be-opened nil)) (unless (null can-be-opened) (let ((overlays (overlays-at (point))) ov-list o invis-prop) (while overlays (setq o (car overlays) invis-prop (overlay-get o 'invisible)) (if (if (eq buffer-invisibility-spec t) invis-prop (or (memq invis-prop buffer-invisibility-spec) (assq invis-prop buffer-invisibility-spec))) (if (overlay-get o 'isearch-open-invisible) (setq ov-list (cons o ov-list)) ;; We found one overlay that cannot be ;; opened, that means the whole chunk ;; cannot be opened. (setq can-be-opened nil))) (setq overlays (cdr overlays))) (if can-be-opened ;; It makes sense to append to the open ;; overlays list only if we know that this is ;; t. (setq crt-overlays (append ov-list crt-overlays))))) (goto-char (next-overlay-change (point))))) ;; See if invisibility reaches up thru END. (if (>= (point) end) (if (and (not (null can-be-opened)) (consp crt-overlays)) (progn (setq isearch-opened-overlays (append isearch-opened-overlays crt-overlays)) (mapc 'isearch-open-overlay-temporary crt-overlays) nil) t)))))) ;;; Highlighting (defvar isearch-overlay nil) (defun isearch-highlight (beg end) (unless (null search-highlight) (cond (isearch-overlay ;; Overlay already exists, just move it. (move-overlay isearch-overlay beg end (current-buffer))) (t ;; Overlay doesn't exist, create it. (setq isearch-overlay (make-overlay beg end)) (overlay-put isearch-overlay 'face isearch) (overlay-put isearch-overlay 'priority 1) ;higher than lazy overlays )))) (defun isearch-dehighlight (totally) (when isearch-overlay (delete-overlay isearch-overlay))) ;;; General utilities (defun isearch-no-upper-case-p (string regexp-flag) "Return t if there are no upper case chars in STRING. If REGEXP-FLAG is non-nil, disregard letters preceded by `\\' (but not `\\\\') since they have special meaning in a regexp." (let (quote-flag (i 0) (len (length string)) found) (while (and (not found) (< i len)) (let ((char (aref string i))) (if (and regexp-flag (eq char ?\\)) (setq quote-flag (not quote-flag)) (if (and (not quote-flag) (not (eq char (downcase char)))) (setq found t)))) (setq i (1+ i))) (not found))) ;; Portability functions to support various Emacs versions. (defun isearch-text-char-description (c) (cond ((< c ?\ ) (format "^%c" (+ c 64))) ((= c ?\^?) "^?") (t (char-to-string c)))) ;; General function to unread characters or events. ;; Also insert them in a keyboard macro being defined. (defun isearch-unread (&rest char-or-events) (mapc 'store-kbd-macro-event char-or-events) (setq unread-command-events (append char-or-events unread-command-events))) ;;; isearch-lazy-highlight feature ;;; by Bob Glickstein <http://www.zanshin.com/~bobg/> ;;; When active, *every* match for the current search string is ;;; highlighted: the current one using the normal isearch match color ;;; and all the others using `isearch-lazy-highlight-face'. The extra ;;; highlighting makes it easier to anticipate where the cursor will ;;; land each time you press C-s or C-r to repeat a pending search. ;;; Highlighting of these additional matches happens in a deferred ;;; fashion using "idle timers," so the cycles needed do not rob ;;; isearch of its usual snappy response. ;;; IMPLEMENTATION NOTE: This depends on some isearch internals. ;;; Specifically: ;;; - `isearch-update' is expected to be called (at least) every time ;;; the search string or window-start changes; ;;; - `isearch-string' is expected to contain the current search ;;; string as entered by the user; ;;; - the type of the current search is expected to be given by ;;; `isearch-word' and `isearch-regexp'; ;;; - the direction of the current search is expected to be given by ;;; `isearch-forward'; ;;; - the variable `isearch-invalid-regexp' is expected to be true ;;; iff `isearch-string' is an invalid regexp. (require 'timer) (defgroup isearch-lazy-highlight nil "Lazy highlighting feature for incremental search." :prefix "isearch-lazy-highlight-" :version "21.1" :group 'isearch) (defcustom isearch-lazy-highlight t "*Controls the lazy-highlighting during incremental searches. When non-nil, all text in the buffer matching the current search string is highlighted lazily (see `isearch-lazy-highlight-initial-delay' and `isearch-lazy-highlight-interval')." :type 'boolean :group 'isearch-lazy-highlight) (defcustom isearch-lazy-highlight-cleanup t "*Controls whether to remove extra highlighting after a search. If this is nil, extra highlighting can be \"manually\" removed with \\[isearch-lazy-highlight-cleanup]." :type 'boolean :group 'isearch-lazy-highlight) (defcustom isearch-lazy-highlight-initial-delay 0.25 "*Seconds to wait before beginning to lazily highlight all matches." :type 'number :group 'isearch-lazy-highlight) (defcustom isearch-lazy-highlight-interval 0 ; 0.0625 "*Seconds between lazily highlighting successive matches." :type 'number :group 'isearch-lazy-highlight) (defcustom isearch-lazy-highlight-max-at-a-time 20 "*Maximum matches to highlight at a time (for `isearch-lazy-highlight'). Larger values may reduce isearch's responsiveness to user input; smaller values make matches highlight slowly. A value of nil means highlight all matches." :type '(choice (const :tag "All" nil) (integer :tag "Some")) :group 'isearch-lazy-highlight) (defgroup isearch-faces nil "Lazy highlighting feature for incremental search." :version "21.1" :group 'isearch) (defface isearch '((((type tty pc) (class color)) (:background "magenta4" :foreground "cyan1")) (((class color) (background light)) ;; The background must not be too dark, for that means ;; the character is hard to see when the cursor is there. (:background "magenta2" :foreground "lightskyblue1")) (((class color) (background dark)) (:background "palevioletred2" :foreground "brown4")) (t (:inverse-video t))) "Face for highlighting Isearch matches." :group 'isearch-faces) (defvar isearch 'isearch) (defface isearch-lazy-highlight-face '((((type tty pc) (class color)) (:background "turquoise3")) (((class color) (background light)) (:background "paleturquoise")) (((class color) (background dark)) (:background "paleturquoise4")) (t (:underline t))) "Face for lazy highlighting of Isearch matches other than the current one." :group 'isearch-faces) (defvar isearch-lazy-highlight-face 'isearch-lazy-highlight-face) (defvar isearch-lazy-highlight-overlays nil) (defvar isearch-lazy-highlight-wrapped nil) (defvar isearch-lazy-highlight-start nil) (defvar isearch-lazy-highlight-end nil) (defvar isearch-lazy-highlight-timer nil) (defvar isearch-lazy-highlight-last-string nil) (defvar isearch-lazy-highlight-window nil) (defvar isearch-lazy-highlight-window-start nil) (defvar isearch-lazy-highlight-case-fold-search nil) (defvar isearch-lazy-highlight-regexp nil) (defun isearch-lazy-highlight-cleanup (&optional force) "Stop lazy highlighting and remove extra highlighting from current buffer. FORCE non-nil means do it whether or not `isearch-lazy-highlight-cleanup' is nil. This function is called when exiting an incremental search if `isearch-lazy-highlight-cleanup' is non-nil." (interactive '(t)) (if (or force isearch-lazy-highlight-cleanup) (while isearch-lazy-highlight-overlays (delete-overlay (car isearch-lazy-highlight-overlays)) (setq isearch-lazy-highlight-overlays (cdr isearch-lazy-highlight-overlays)))) (when isearch-lazy-highlight-timer (cancel-timer isearch-lazy-highlight-timer) (setq isearch-lazy-highlight-timer nil))) (defun isearch-lazy-highlight-new-loop () "Cleanup any previous `isearch-lazy-highlight' loop and begin a new one. This happens when `isearch-update' is invoked (which can cause the search string to change or the window to scroll)." (when (and isearch-lazy-highlight (null executing-kbd-macro) (sit-for 0) ;make sure (window-start) is credible (or (not (equal isearch-string isearch-lazy-highlight-last-string)) (not (eq (selected-window) isearch-lazy-highlight-window)) (not (eq isearch-lazy-highlight-case-fold-search isearch-case-fold-search)) (not (eq isearch-lazy-highlight-regexp isearch-regexp)) (not (= (window-start) isearch-lazy-highlight-window-start)))) ;; something important did indeed change (isearch-lazy-highlight-cleanup t) ;kill old loop & remove overlays (when (not isearch-invalid-regexp) (setq isearch-lazy-highlight-window (selected-window) isearch-lazy-highlight-window-start (window-start) isearch-lazy-highlight-start (point) isearch-lazy-highlight-end (point) isearch-lazy-highlight-last-string isearch-string isearch-lazy-highlight-case-fold-search isearch-case-fold-search isearch-lazy-highlight-regexp isearch-regexp isearch-lazy-highlight-wrapped nil) (setq isearch-lazy-highlight-timer (run-with-idle-timer isearch-lazy-highlight-initial-delay nil 'isearch-lazy-highlight-update))))) (defun isearch-lazy-highlight-search () "Search ahead for the next or previous match, for lazy highlighting. Attempt to do the search exactly the way the pending isearch would." (let ((case-fold-search isearch-case-fold-search) (choices (cond (isearch-word '(word-search-forward . word-search-backward)) (isearch-regexp '(re-search-forward . re-search-backward)) (t '(search-forward . search-backward))))) (funcall (if isearch-forward (car choices) (cdr choices)) isearch-string (if isearch-forward (if isearch-lazy-highlight-wrapped isearch-lazy-highlight-start (window-end)) (if isearch-lazy-highlight-wrapped isearch-lazy-highlight-end (window-start))) t))) (defun isearch-lazy-highlight-update () "Update highlighting of other matches for current search." (let ((max isearch-lazy-highlight-max-at-a-time) (looping t) nomore) (save-excursion (save-match-data (goto-char (if isearch-forward isearch-lazy-highlight-end isearch-lazy-highlight-start)) (while looping (let ((found (isearch-lazy-highlight-search))) (when max (setq max (1- max)) (if (<= max 0) (setq looping nil))) (if found (let ((mb (match-beginning 0)) (me (match-end 0))) (if (= mb me) ;zero-length match (forward-char 1) ;; non-zero-length match (let ((ov (make-overlay mb me))) (overlay-put ov 'face isearch-lazy-highlight-face) (overlay-put ov 'priority 0) ;lower than main overlay (overlay-put ov 'window (selected-window)) (push ov isearch-lazy-highlight-overlays))) (if isearch-forward (setq isearch-lazy-highlight-end (point)) (setq isearch-lazy-highlight-start (point)))) ;; not found (if isearch-lazy-highlight-wrapped (setq looping nil nomore t) (setq isearch-lazy-highlight-wrapped t) (if isearch-forward (progn (setq isearch-lazy-highlight-end (window-start)) (goto-char (window-start))) (setq isearch-lazy-highlight-start (window-end)) (goto-char (window-end))))))) (unless nomore (setq isearch-lazy-highlight-timer (run-at-time isearch-lazy-highlight-interval nil 'isearch-lazy-highlight-update))))))) (defun isearch-resume (search regexp word forward message case-fold) "Resume an incremental search. SEARCH is the string or regexp searched for. REGEXP non-nil means the resumed search was a regexp search. WORD non-nil means resume a word search. FORWARD non-nil means resume a forward search. MESSAGE is the echo-area message recorded for the search resumed. CASE-FOLD non-nil means the search was case-insensitive." (isearch-mode forward regexp nil nil word) (setq isearch-string search isearch-message message isearch-case-fold-search case-fold) (isearch-search)) ;;; isearch.el ends here