Mercurial > emacs
view etc/termcap.src @ 31547:55b581b3fc5b
*** empty log message ***
| author | Kenichi Handa <handa@m17n.org> |
|---|---|
| date | Mon, 11 Sep 2000 23:42:27 +0000 |
| parents | 6b5aacec5ace |
| children | 19d92c9e26e9 |
line wrap: on
line source
####### TERMINAL TYPE DESCRIPTIONS SOURCE FILE # # Version 9.8.1 # termcap syntax # # Eric S. Raymond (current maintainer) # John Kunze, Berkeley # Craig Leres, Berkeley # # Please e-mail changes to terminfo@ccil.org. The old termcap@berkeley.edu # address is no longer valid. # # PURPOSE OF THIS FILE: # # This file describes the capabilities of various character-cell terminals, # as needed by software such as screen-oriented editors. # # Pointers to related resources (including the ncurses distribution) may # be found at <http://www.ccil.org/~esr/ncurses.html>. # # FILE FORMAT: # # The version you are looking at may be in any of three formats: master # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell # which by the format given in the header above. # # The master format is accepted and generated by the terminfo tools in the # ncurses suite; it differs from stock (System V-compatible) terminfo only # in that it admits a group of capabilities (prefixed `OT') equivalent to # various obsolete termcap capabilities. You can, thus, convert from master # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if # you have ncurses `tic -I' is nicer. # # The termcap version is generated automatically from the master version # using tic -C. This filtering leaves in the OT capabilities under their # original termcap names. All translated entries fit within the # 1023-byte string-table limit of archaic termcap libraries except where # explicitly noted below. # # For details on these formats, see terminfo(5) in the ncurses distribution, # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD # curses has been declared obsolete by the caretakers of the 4.4BSD sources # as of June 1995; they are encouraging everyone to migrate to ncurses. # # Note: unlike some other distributed terminfo files (Novell Unix & SCO's), # no entry in this file has embedded comments. This is so source translation # to termcap only has to carry over leading comments. Also, no name field # contains embedded whitespace (such whitespace confuses rdist). # # Further note: older versions of this file were often installed with an editor # script (reorder) that moved the most common terminal types to the front of # the file. This should no longer be necessary, as the file is now ordered # roughly by type frequency with ANSI/VT100 and other common types up front. # # CONTINUITY WITH HISTORICAL VERSIONS: # # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94. # Releases 9 and up are maintained by Eric Raymond as part of the ncurses # project. # # This file contains all the capability information present in John Kunze's # last version of the termcap master file, except as noted in the change # comments at end of file. Some information about very ancient obsolete # capabilities has been moved to comments. Some all-numeric names of older # terminals have been retired. # # The 9.1.0 version of this file was translated from a syntax-corrected copy of # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for # the purpose. Unless the ncurses tic implementation and the Lisp code were # making perfectly synchronized mistakes which I then failed to catch by # eyeball, the translation was correct and perfectly information-preserving. # # Some information has been merged in from terminfo files distributed by # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information # comes from vendors who maintain official terminfos for their hardware # (notably DEC and Wyse). # # A detailed change history is included at the end of this file. # # FILE ORGANIZATION: # # Comments in this file begin with # - they cannot appear in the middle # of a terminfo/termcap entry. Individual capabilities are commented out by # placing a period between the colon and the capability name. # # Starting with version 9.0.0, the file is divided up into major sections # (headed by lines beginning with "########") and minor sections (beginning # with "####"); do # # grep "^####" <file> | more # # to see a listing of section headings. The intent of the divisions is # (a) to make it easier to find things, and (b) to order the database so # that important and frequently-encountered terminal types are near the # front (so that you'll get reasonable search efficiency even if you don't # use reorder). Minor sections usually correspond to manufacturers or # standard terminal classes. Parenthesized words following manufacturer # names are type prefixes or product line names used by that manufacturers. # # Finally, because this file is released in both terminfo and termcap formats, # most references to termcap names in comments are bracketed with colons (the # termcap separator) so they can be distinguished from terminfo capability # names. # # HOW TO READ THE ENTRIES: # # The first name in an entry is the canonical name for the model or # type, last entry is a verbose description. Others are mnemonic synonyms for # the terminal. # # Terminal names look like <manufacturer> <model> - <modes/options> # The part to the left of the dash, if a dash is present, describes the # particular hardware of the terminal. The part to the right may be used # for flags indicating special ROMs, extra memory, particular terminal modes, # or user preferences. # # All names should be in lower case, for consistency in typing. # # The following are conventionally used suffixes: # mono suppress color support # rv Terminal in reverse video mode (black on white) # 2p Has two pages of memory. Likewise 4p, 8p, etc. # w Wide - in 132 column mode. # pp Has a printer port which is used. # na No arrow keys - termcap ignores arrow keys which are # actually there on the terminal, so the user can use # the arrow keys locally. # nam No auto-margin - suppress am capability # mc Magic-cookie. Some terminals (notably older Wyses) can # only support one attribute without magic-cookie lossage. # Their base entry is usually paired with another that # uses magic cookies to support multiple attributes. # vb Use visible bell (flash) rather than beep. # # To easily test a new terminal description, put it in $HOME/.termcap # and programs will look there before looking in /etc/termcap. # You can also setenv TERMPATH to a list of full pathnames (separated # by spaces or colons) to be searched by tgetent() in the order listed. # The TERMCAP environment variable is usually set to the termcap # entry itself to avoid reading files when starting up a program. # # RELEASE 9 COMMENTS: # # To avoid search clashes, some older all-numeric names for terminals have # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621). # All primary names of terminals now have alphanumeric prefixes. # # Comments marked "esr" are mostly results of applying the termcap-compiler # code packaged with ncurses and contemplating the resulting error messages. # In many cases, these indicated obvious fixes to syntax garbled by the # composers. In a few cases, I was able to deduce corrected forms for garbled # capabilities by looking at context. All the information in the original # entries is preserved in the comments. # # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some # capabilities (EP, dF, dT, dV, kn, ko, ma, ml, mu, xr, xx) that are no longer # used by BSD curses. # # Entries derived from XENIX use a termcap-extension set that showed up in # several entries, notably those for scoansi, ibmpcx, lisa, trs16, fos, and # the altos terminals. Its signature is the use of GS/GE as an as/ae pair. # This set of extensions and their translations are described in the extended # comment at the end of this file. # # There is a second, smaller set of extensions used by AT&T terminals and # also described in the trailing comment. # # Besides these and the terminals mentioned above, only the psterm variants, # zen50, wsiris and minitel had unknown capabilities that weren't obviously # garbled. # # INTERPRETATION OF USER CAPABILITIES # # The System V Release 4 and XPG4 terminfo format defines ten string # capabilities for use by applications, u0...u9. In this file, we use # certain of these capabilities to describe functions which are not covered # by terminfo. The mapping is as follows: # # u9 terminal enquire string (equivalent to ANSI DA) # u8 terminal answerback description # u7 cursor position request (equivalent to VT100 DSR 6) # u6 cursor position report (equivalent to ANSI CPR) # # The terminal enquire string u9 should elicit an answerback response # from the terminal. Common values for u9 will be ^E (on older ASCII # terminals) or \E[c (on newer VT100/ANSI-compatible terminals). # # The cursor position request (u7) string should elicit a cursor position # report. A typical value (for ANSI/VT100 terminals) is \E[6n. # # The terminal answerback description (u8) must consist of an expected # answerback string. The string may contain the following scanf(3)-like # escapes: # # %c Accept any character # %[...] Accept any number of characters in the given set # # The cursor position report (u6) string must contain two scanf(3)-style # %d format elements. The first of these must correspond to the Y coordinate # and the second to the %d. The typical CPR value is \E[%d;%dR (on VT100/ # ANSI-compatible terminals). # # These capabilities are used by tac(1m), the terminfo action checker soon # to be distributed with ncurses. # # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL: # # As the ANSI standard and variants take firmer hold, and as character-cell # terminals are increasingly replaced by X displays, much of this file # is becoming a historical document (this is part of the reason for the # new organization, which puts ANSI types, xterm, and vt100 up front in # confidence that this will catch 95% of new hardware). # # For the terminal types still alive, I'd like to have manufacturer's # contact data (Internet address and/or snail-mail + phone). # # I'm also interested in enriching the comments so that the latter portions of # the file do in fact become a potted history of VDT technology as seen by # UNIX hackers. Ideally, I'd like the headers for each manufacturer to # include its live/dead/out-of-the-business status, and for as many # terminal types as possible to be tagged with information like years # of heaviest use, popularity, and interesting features. # # I'm especially interested in identifying the obscure entries listed under # `Manufacturer unknown' and `Utter unknowns', before the tribal wisdom # about them gets lost. # # If you have been around long enough to contribute, please read the file # with this in mind and send me your annotations. # # COPYRIGHTS AND OTHER DELUSIONS # # The BSD ancestor of this file had a standard Regents of the University of # California copyright with dates from 1980 to 1993. # # Some information has been merged in from a terminfo file SCO distributes. # It has an obnoxious boilerplate copyright which I'm ignoring because they # took so much of the content from the ancestral BSD versions of this file # and didn't attribute it, thereby violating the BSD Regents' copyright. # # Not that anyone should care. However many valid functions copyrights may # serve, putting one on a termcap/terminfo file with hundreds of anonymous # contributors makes about as much sense as copyrighting a wall-full of # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous. # # This file deliberately has no copyright. It belongs to no one and everyone. # If you claim you own it, you will merely succeed in looking like a fool. # Use it as you like. Use it at your own risk. Copy and redistribute freely. # There are no guarantees anywhere. Svaha! ######## STANDARD AND SPECIAL TYPES # # This section describes terminal classes and maker brands that are still # quite common. # #### Specials # # Special "terminals". These are used to label tty lines when you don't # know what kind of terminal is on it. The characteristics of an unknown # terminal are the lowest common denominator - they look about like a ti 700. # The last one, "other", is like unknown but it allows an escape from software # that insists that a "real" unknown terminal is merely so far unspecified. # dumb:\ :am:\ :co#80:\ :bl=^G:cr=^M:do=^J:sf=^J: unknown:\ :gn:\ :tc=dumb: other|none of the above, but not exactly unknown:\ :am:gn:\ :co#80:\ :cl=^M^J:do=^J:ho=^M: arpanet|bussiplexer|dialup|ethernet|network|net|patch|plugboard|switch|network switch or dialup:\ :tc=unknown: lpr|printer|print|printing|line printer:\ :hc:os:\ :co#132:li#66:\ :bl=^G:cr=^M:do=^J:ff=^L:le=^H:sf=^J: #### ANSI terminals and terminal emulators # # See near the end of this file for details on ANSI conformance. # Don't mess with these entries! Lots of other entries depend on them! # # This section lists entries in a least-capable to most-capable order. # if you're in doubt about what `ANSI' matches yours, try them in that # order and back off from the first that breaks. # (ansi: changed ":pt:" to ":it#8:" -- esr) ansi-mini|any ansi terminal with pessimistic assumptions:\ :am:bs:\ :co#80:it#8:li#24:\ :ce=\E[K:cl=\E[;H\E[2J:cm=\E[%i%d;%dH:do=\E[B:\ :ho=\E[H:le=\E[D:nd=\E[C:up=\E[A: # Color controls corresponding to the ANSI.SYS de-facto standard # (This is not a standalone entry) ansi-pc-color:\ :Co#8:NC#3:pa#64:\ :AB=\E[4%p1%dm:AF=\E[3%p1%dm:\ :..Sb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m:\ :..Sf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m:\ :op=\E[37;40m: # Procomm and some other ANSI emulations don't recognize all of the ANSI- # standard capabilities. This entry deletes cuu, cuf, cud, cub, and vpa/hpa # capabilities, forcing curses to use repetitions of cuu1, cuf1, cud1 and cub1. # Also deleted ich and ich1, as QModem up to 5.03 doesn't recognize these. # Finally, we delete rep and ri, which seem to confuse many emulators. # On the other hand, we can count on these programs doing rmacs/smacs/sgr. # From: Eric S. Raymond <esr@snark.thyrsus.com> July 25 1995 pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode):\ :am:bs:mi:ms:pt:\ :co#80:it#8:li#24:\ :ae=\E[10m:al=\E[L:as=\E[12m:bl=^G:bt=\E[Z:cd=\E[J:\ :ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:ct=\E[2g:\ :dc=\E[P:dl=\E[M:do=\E[B:ho=\E[H:kb=^H:kd=\E[B:\ :kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:mb=\E[5m:\ :md=\E[1m:me=\E[0m:mk=\E[9m:mr=\E[7m:nd=\E[C:\ :..sa=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p8%t;11%;%?%p9%t;12%;m:\ :se=\E[m:sf=^J:so=\E[7m:st=\EH:ta=^I:ue=\E[m:up=\E[A:\ :us=\E[4m: pcansi-mono25|ansi25|ibm-pc terminal programs with 25 lines (mono mode):\ :li#25:\ :tc=pcansi-mono: pcansi-mono33|ansi33|ibm-pc terminal programs with 33 lines (mono mode):\ :li#33:\ :tc=pcansi-mono: pcansi-mono43|ansi43|ibm-pc terminal programs with 43 lines (mono mode):\ :li#43:\ :tc=pcansi-mono: # The color versions. All PC emulators do color... pcansi|ibm-pc terminal programs claiming to be ansi:\ :tc=ansi-pc-color:tc=pcansi-mono: pcansi-25|ansi25|ibm-pc terminal programs with 25 lines:\ :li#25:\ :tc=pcansi: pcansi-33|ansi33|ibm-pc terminal programs with 33 lines:\ :li#33:\ :tc=pcansi: pcansi-43|ansi43|ibm-pc terminal programs with 43 lines:\ :li#43:\ :tc=pcansi: # From: Eric S. Raymond <esr@snark.thyrsus.com> Feb 3 1995 # ansi-mono -- full X.364 with ANSI.SYS-compatible attributes, no color. # Function-key mappings aren't in X3.64 but these are pretty standard. # If you want pound signs rather than dollars, replace `B' with `A' # in the s?ds capabilities. ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes:\ :5i:\ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\E[W:\ :F2=\E[X:IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:\ :SR=\E[%dT:UP=\E[%dA:cb=\E[1K:ch=\E[%dG:ct=\E[2g:\ :cv=\E[%dd:ec=\E[%dX:ei=:im=:k1=\E[M:k2=\E[N:k3=\E[O:\ :k4=\E[P:k5=\E[Q:k6=\E[R:k7=\E[S:k8=\E[T:k9=\E[U:\ :k;=\E[V:kB=\E[Z:kI=\E[L:kb=^H:kd=\E[B:kl=\E[D:\ :kr=\E[C:ku=\E[A:me=\E[0;10m:nw=\r\E[S:pf=\E[4i:\ :po=\E[5i:..rp=%p1%c\E[%p2%{1}%-%db:s0=\E(B:s1=\E)B:\ :s2=\E*B:s3=\E+B:\ :..sa=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p8%t;11%;%?%p9%t;12%;m:\ :ta=\E[I:tc=pcansi: # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in # standard terminfo. Assumes ANSI.SYS-compatible attributes and color # From: Eric S. Raymond <esr@snark.thyrsus.com> Feb 12 1995 ansi|ansi/pc-term compatible with color:\ :u6=\E[%d;%dR:u7=\E[6n:..u8=\E[?%[;0123456789]c:\ :u9=\E[c:tc=ansi-pc-color:tc=ansi-mono: # # ANSI.SYS entries # # Cannot use :pt:, it does not work (why?). :ho: seems required (why?). [gts] # Caution: 4.3 BSD tset does not pass li#25 to stty rows except during login? # :cl: clears attributes and sets wrap at margin before clearing the screen. # (ansi.sys: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr) # From: greg small <gts@populi.berkeley.edu> ansi.sys|ansisys|PC-DOS 3.1 ANSI.SYS:\ :am:bs:ms:\ :co#80:li#25:\ :ae=\E[10:as=\E[12:ce=\E[K:cl=\E[m\E[7h\E[2J:\ :cm=\E[%i%d;%dH:ho=\E[H:\ :is=U1 PC-DOS 3.1 ANSI.SYS 9-23-86\n\E[m\E[7h:kd=^J:\ :kh=^^:kl=^H:kr=^L:ku=^K:md=\E[1m:me=\E[0;10m:\ :mr=\E[7m:nd=\E[C:se=\E[m:so=\E[1m:ue=\E[m:up=\E[A:\ :us=\E[4m: # # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS. # This should only be used when the terminal emulator cannot redefine the keys. # Since redefining keys with ansi.sys also affects PC-DOS programs, the key # definitions must be restored. If the terminal emulator is quit while in vi # or others using :ks:ke:, the keypad keys will not be defined as per PC-DOS. # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab. # Left arrow is always BS, because PC-dos can tolerate this change. # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi. # Consequently the End keypad key could not be set (it is relatively safe and # actually useful because it sends ^@ O, which beeps and opens a line above). ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi:\ :is=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p:\ :ke=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p:\ :ks=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p:tc=ansi.sys: # # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer. nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS:\ :al=\E[1L:dc=\E[1P:dl=\E[1M:ei=:ic=\E[1@:im=:\ :is=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n:tc=ansi.sys: # # See ansi.sysk and nansi.sys above. nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi:\ :al=\E[1L:dc=\E[1P:dl=\E[1M:ei=:ic=\E[1@:im=:\ :is=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p:tc=ansi.sysk: #### ANSI console types # # This entry is good for the 1.1.47 version of the Linux console driver. # # It assumes that you want A_PROTECT mapped to the alternate character set # mode that permits IBM ROM characters to be displayed (this is the assumption # used by ncurses version 1.9 and after, in order not to collide with the # internationalization attribute values specified in the XSI Curses standard). # # We use \E11m for rmacs rather than \E12m so the acsc string can use the ROM # graphics for control characters such as the diamond, up arrow and down-arrow. # This trick could work with other Intel consoles like the att6386 and pc3. # # Note: there are numerous broken linux entries out there, which didn't screw # up BSD termcap but hose ncurses's smarter cursor-movement optimization. # One common pathology is an incorrect tab length of 4. Also note that the # hpa=\E[%dG/vpa=\E[%dd capabilities seem not to be reliable. To reproduce # the bug, re-introduce them and run worm -T 200 212 from the ncurses # test suite, save the trace, then worm -N -T 200 212. Observe that the first # run fails to properly delete some worm segments, then diff the trace files. # # From: Eric S. Raymond <esr@snark.thyrsus.com> 23 July 1995 linux|linux console:\ :am:bs:eo:mi:ms:ut:xn:xo:\ :Co#8:co#80:it#8:li#25:pa#64:\ :&7=^Z:@7=\E[4~:AB=\E[4%p1%dm:AF=\E[3%p1%dm:\ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:F1=\E[23~:F2=\E[24~:\ :F3=\E[25~:F4=\E[26~:F5=\E[28~:F6=\E[29~:F7=\E[31~:\ :F8=\E[32~:F9=\E[33~:FA=\E[34~:IC=\E[%d@:K2=\E[G:\ :S2=\E[11m:S3=\E[10m:Sb=\E[%+(m:Sf=\E[%+^^m:\ :ac=`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~q\304r\362s_t\303u\264v\301w\302x\263y\371z\372{\373|\374}\375~\376.\031-\030\054\021+^P0\333:\ :ae=\E[10m:al=\E[L:as=\E[11m:bl=^G:cd=\E[J:ce=\E[K:\ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\ :ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:\ :ic=\E[@:im=\E[4h:k1=\E[[A:k2=\E[[B:k3=\E[[C:\ :k4=\E[[D:k5=\E[[E:k6=\E[17~:k7=\E[18~:k8=\E[19~:\ :k9=\E[20~:k;=\E[21~:kD=\E[3~:kI=\E[2~:kN=\E[6~:\ :kP=\E[5~:kb=^H:kd=\E[B:kh=\E[1~:kl=\E[D:kr=\E[C:\ :ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[0;10m:\ :mr=\E[7m:nd=\E[C:nw=^M^J:op=\E[37;40m:r1=\Ec:rc=\E8:\ :..sa=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p8%t;11%;%?%p9%t;11%;m:\ :sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\ :u6=\E[%d;%dR:u7=\E[6n:u8=\E[?6c:u9=\E[c:ue=\E[24m:\ :up=\E[A:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h:\ :vi=\E[?25l: linux-mono|Linux console, no color:\ :Co@:pa@:\ :AB@:Sb@:Sf@:tc=linux: # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file linux-nic|linux with ich/ich1 suppressed for non-curses programs:\ :IC@:ei=:ic@:im=:tc=linux: # SCO console and SOS-Syscons console for 386bsd # (scoansi: had unknown capabilities # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\ # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:RT=^J: # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\ # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\ # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\ # I renamed GS/GE/HM/EN/PU/PD and mapped ":pt:" to ":it#8:" -- esr) scoansi|SCO Extended ANSI standard crt:\ :am:bs:eo:pt:\ :co#80:it#8:li#25:\ :@7=\E[F:ae=\E[10m:al=\E[L:as=\E[12m:bt=\E[Z:cd=\E[J:\ :ce=\E[K:cl=\E[2J\E[H:cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:\ :do=\E[B:ei=:ho=\E[H:ic=\E[@:im=:k1=\E[M:k2=\E[N:\ :k3=\E[O:k4=\E[P:k5=\E[Q:k6=\E[R:k7=\E[S:k8=\E[T:\ :k9=\E[U:k;=\E[V:kN=\E[G:kP=\E[I:kb=^H:kd=\E[B:\ :kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:mb=\E[5m:md=\E[1m:\ :me=\E[m:nd=\E[C:se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:\ :ue=\E[m:up=\E[A:us=\E[4m: # From: Eric Raymond <esr@snark.thyrsus.com> Wed Jan 18 17:14:34 EST 1995 att6386|AT386|at386|386AT|386at|AT&T WGS 6386 console:\ :am:bw:eo:xo:\ :co#80:it#8:li#25:\ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\EOZ:\ :F2=\EOA:IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:\ :SR=\E[%dT:UP=\E[%dA:\ :ac=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~:\ :ae=\E[10m:al=\E[1L:as=\E[12m:bl=^G:bt=\E[Z:cd=\E[J:\ :ce=\E[K:ch=\E[%i%dG:cl=\E[2J\E[H:cm=\E[%i%d;%dH:\ :cr=^M:ct=\E[2g:cv=\E[%dd:dc=\E[P:dl=\E[1M:do=\E[B:\ :ec=\E[%dX:ei=:ho=\E[H:ic=\E[1@:im=:is=\E[0;10;39m:\ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOT:k6=\EOU:\ :k7=\EOV:k8=\EOW:k9=\EOX:k;=\EOY:kD=\E[P:kI=\E[@:\ :kM=\E0:kN=\E[U:kP=\E[V:kb=^H:kd=\E[B:kh=\E[H:\ :kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:mb=\E[5m:md=\E[1m:\ :me=\E[0;10m:mk=\E[9m:mr=\E[7m:nd=\E[C:nw=\r\E[S:\ :..sa=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m:\ :se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:st=\EH:ta=^I:\ :ue=\E[m:up=\E[A:us=\E[4m:vb=^G:tc=ansi-pc-color: # (pc6300plus: ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr) pc6300plus|6300plus:\ :am:bs:\ :co#80:li#24:\ :al=\E[1L:bl=^G:cd=\E[0J:ce=\E[0K:cl=\E[2J\E[H:\ :cm=\E[%i%2;%2H:cr=^M:ct=\E[3g:dc=\E[1P:dl=\E[1M:\ :do=\E[B:ei=:ho=\E[H:ic=\E[1@:im=:k1=\EOc:k2=\EOd:\ :k3=\EOe:k4=\EOf:k5=\EOg:k6=\EOh:k7=\EOi:k8=\EOj:\ :k9=\EOk:k;=\EOu:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:\ :ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:mh=\E[2m:\ :mk=\E[9m:mr=\E[7m:nd=\E[C:nw=^M^J:se=\E[m:sf=^J:\ :so=\E[7m:st=\EH:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[=1C:\ :vi=\E[=C: # # Terminfo entry for the AT&T Unix PC 7300 # from escape(7) in Unix PC 7300 Manual. # Somewhat similar to a vt100-am (but different enough # to redo this from scratch.) # # /*************************************************************** # * # * FONT LOADING PROGRAM FOR THE UNIX PC # * # * This routine loads a font defined in the file ALTFONT # * into font memory slot #1. Once the font has been loaded, # * it can be used as an alternative character set. # * # * The call to ioctl with the argument WIOCLFONT is the key # * to this routine. For more information, see window(7) in # * the PC 7300 documentation. # ***************************************************************/ # #include <string.h> /* needed for strcpy call */ # #include <sys/window.h> /* needed for ioctl call */ # #define FNSIZE 60 /* font name size */ # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */ # /* # * The file /usr/lib/wfont/special.8.ft comes with the # * standard PC software. It defines a graphics character set # * similar to that of the Teletype 5425 terminal. To view # * this or other fonts in /usr/lib/wfont, use the command # * cfont <filename>. For further information on fonts see # * cfont(1) in the PC 7300 documentation. # */ # # struct altfdata /* structure for alt font data */ # { # short altf_slot; /* memory slot number */ # char altf_name[FNSIZE]; /* font name (file name) */ # }; # ldfont() # { # int wd; /* window in which altfont will be */ # struct altfdata altf; # altf.altf_slot=1; # strcpy(altf.altf_name,ALTFONT); # for (wd =1; wd < 12; wd++) { # ioctl(wd, WIOCLFONT,&altf); # } # } # att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300:\ :am:xn:xo:\ :co#80:it#8:li#24:\ :!1=\ESV:!3=\EUD:#1=\EHL:#2=\EHM:#3=\ENJ:#4=\EBW:\ :%0=\Ero:%1=\Ehl:%2=\Emk:%4=\Emv:%5=\Enx:%6=\Eop:\ :%7=\Eot:%8=\Epv:%9=\Epr:%b=\EMV:%c=\ENX:%d=\EOT:\ :%e=\EPV:%g=\ERO:%h=\ERP:%i=\EFW:&0=\ECN:&1=\Ere:\ :&2=\Erf:&3=\Erp:&4=\Ers:&6=\Esv:&8=\Eud:&9=\EBG:\ :*0=\EFI:*2=\ECP:*3=\ECR:*4=\EDC:*5=\EDL:*6=\Esl:\ :*7=\EEN:*8=\ECI:@0=\Efi:@1=\Ebg:@2=\Ecn:@3=\Ecl:\ :@4=\Ecm:@5=\Ecp:@6=\Ecr:@7=\Een:@9=\Eex:AL=\E[%dL:\ :DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\ :ae=\E[10m:al=\E[L:as=\E[11m:bl=^G:bt=\E^I:cd=\E[0J:\ :ce=\E[0K:cl=\E[2J\E[H:cm=\E[%i%d;%dH:cr=^M:dl=\E[M:\ :do=\E[B:ho=\E[H:i1=^O:k1=\EOP:k2=\EOQ:k3=\EOR:\ :k4=\EOS:k5=\E5:k6=\E6:k7=\E7:k8=\E8:kB=\E^I:kC=\Ece:\ :kD=\Edc:kE=\Eci:kF=\Erd:kI=\Eim:kN=\Epg:kP=\EPG:\ :kR=\Eru:kS=\Ece:kb=^H:kd=\E[B:kh=\Ehm:kl=\E[D:\ :kr=\E[C:ku=\E[A:md=\E[7m:me=\E[0;10m:mh=\E[2m:\ :mr=\E[7m:nd=\E[C:nw=\EE:se=\E[0m:sf=^J:so=\E[7m:\ :sr=\EM:ue=\E[0m:up=\E[A:us=\E[4m: # From: <davis@unidata.ucar.edu> iris-ansi|iris-ansi-net|IRIS emulating ANSI terminal:\ :am:\ :co#80:it#8:li#40:\ :!2=\E[218q:#2=\E[143q:#4=\E[158q:%9=\E[209q:\ :%f=\E[210q:%i=\E[167q:&7=\E[217q:*4=\E[P:*7=\E[147q:\ :@7=\E[146q:@8=^M:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:\ :F1=\EOR:F2=\EOS:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\ :al=\E[L:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:\ :cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:dl=\E[M:do=^J:ho=\E[H:\ :is=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8:k1=\E[001q:\ :k2=\E[002q:k3=\E[003q:k4=\E[004q:k5=\E[005q:\ :k6=\E[006q:k7=\E[007q:k8=\E[008q:k9=\EOP:k;=\EOQ:\ :kB=\E[Z:kD=\177:kI=\E[139q:kM=\E[146q:kN=\E[154q:\ :kP=\E[150q:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:\ :ku=\E[A:le=\E[D:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\ :nw=\EE:pk=\EP101;%d.y%s\E\\:rc=\E8:sc=\E7:se=\E[m:\ :sf=\ED:so=\E[1;7m:sr=\EM:st=\EH:ta=^I:ue=\E[m:\ :up=\E[A:us=\E[4m:ve=\E[9/y\E[12/y\E[=6l:\ :vs=\E[10/y\E[=1h\E[=2l\E[=6h: # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu> oldpc3|oibmpc3|IBM PC 386BSD Console:\ :am:bs:bw:eo:\ :co#80:li#25:\ :ac=l\332q\304k\277x\263j\331m\300w\302u\264v\301t\303n\305:\ :cd=\E[J:ce=\E[K:cl=\Ec:cm=\E[%i%2;%2H:do=\E[B:\ :ho=\E[;H:kd=\E[B:kh=\E[Y:kl=\E[D:kr=\E[C:ku=\E[A:\ :md=\E[7m:me=\E[0m\E[1;0x\E[2;7x:nd=\E[C:\ :se=\E[1;0x\E[2;7x:sf=\E[S:so=\E[1;7x\E[2;0x:sr=\E[T:\ :ue=\E[1;0x\E[2;7x:up=\E[A:us=\E[1;7x\E[2;0x: # BSD/OS console emulator # The emulator supports many of the additional console features # listed in the iBSC2 (e.g. color and character-set selection). # The console will also work with fewer lines after doing # "stty rows NN", e.g. to use 24 lines. # (This is the entry BSDI ships) pc3|ibmpc3|IBM PC BSD/OS Console:\ :am:bw:eo:km:\ :co#80:it#8:li#25:\ :AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:\ :UP=\E[%dA:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\Ec:\ :cm=\E[%i%d;%dH:cr=^M:dl=\E[M:do=^J:ho=\E[H:kH=\E[F:\ :kI=\E[L:kN=\E[G:kP=\E[I:kb=^H:kd=\E[B:kh=\E[H:\ :kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:\ :me=\E[0m:mh=\E[=8F:mr=\E[7m:nd=\E[C:nw=^M^J:\ :rc=\E[=u:sc=\E[=s:se=\E[0m:sf=^J:so=\E[7m:ta=^I:\ :up=\E[A: pc3-bold|ibmpc3|IBM PC BSD/OS Console with bold instead of underline:\ :ue=\E[0m:us=\E[1m:tc=pc3: # The following is a version of the ibm-pc entry distributed with PC/IX, # (Interactive Systems' System 3 for the Big Blue), modified by Richard # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original, # (the former is untrue, and the latter failed under UCB/man); standout and # underline modes have been added. Note: this entry describes the "native" # capabilities of the PC monochrome display, without ANY emulation; most # communications packages (but NOT PC/IX connect) do some kind of emulation. pcix|PC/IX console:\ :am:bs:bw:eo:\ :co#80:li#24:\ :cd=\E[J:ce=\E[K:cl=\Ec:cm=\E[%i%2;%2H:do=\E[B:\ :ho=\E[;H:nd=\E[C:se=\E[0m:so=\E[7m:ue=\E[0m:up=\E[A:\ :us=\E[4m: # (ibmx: this entry formerly included the following unknown capabilities: # :GC=b:GL=v:GR=t:RT=^J:\ # :GH=\E[196g:GV=\E[179g:\ # :GU=\E[193g:GD=\E[194g:\ # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\ # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\ # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\ # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate # ":kh=\E[Y:" -- esr) ibmpcx|xenix|ibmx|IBM PC xenix console display:\ :am:bs:ms:\ :co#80:li#25:\ :@7=\E[d:MR=\E[0m:ae=\E[10m:al=\E[L:as=\E[11m:\ :cd=\E[J:ce=\E[K:cl=^L:cm=\E[%d;%dH:dc=\E[P:dl=\E[M:\ :do=\E[B:ei=:ho=\E[H:ic=\E[@:im=:k1=\E[K:k2=\E[L:\ :k3=\E[M:k4=\E[N:kN=\E[e:kP=\E[Z:kb=^H:kd=\E[B:\ :kh=\E[Y:kl=\E[D:kr=\E[C:ku=\E[A:nd=\E[C:se=\E[0m:\ :so=\E[7m:ue=\E[m:up=\E[A:us=\E[4m: ibmc|ibmcpc|IBM PC xenix color console display:\ :tc=ibmpcx: ibmcx|ibmcpcx:\ :tc=ibmpcx: pcvt25h|386BSD pcvt rel 2.10 vt220 emulator video driver:\ :am:km:mi:ms:xn:\ :it#8:pb#9216:vt#3:\ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\ :LE=\E[%dD:RI=\E[%dC:SF=\E%dD:SR=\E%dM:UP=\E[%dA:\ :ae=^O:al=\E[L:as=^N:bl=^G:cd=\E[J:ce=\E[K:\ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\ :ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:\ :i1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;25r\E[25;1H:\ :ic=\E[@:im=\E[4h:k1=\E[17~:k2=\E[18~:k3=\E[19~:\ :k4=\E[20~:k5=\E[21~:k6=\E[23~:k7=\E[24~:k8=\E[25~:\ :kD=\E[3~:kH=\E[4~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^_:\ :kd=\EOB:ke=\E[?1l\E>:kh=\E[1~:kl=\EOD:kr=\EOC:\ :ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:\ :me=\E[m:mr=\E[7m:nd=\E[C:nw=^M^J:\ :r1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:\ :rf=/usr/share/tabset/vt100:sc=\E7:se=\E[27m:sf=\ED:\ :so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[24m:up=\E[A:\ :us=\E[4m: #### DEC VT100 and compatibles # # DEC terminals from the vt100 forward are collected here. Older DEC terminals # and micro consoles can be found in the `obsolete' section. More details # on the relationship between the VT100 and ANSI X3.64 may be found near the # end of this file. # # Except where noted, these entries are DEC's official terminfos. # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support # Engineering for more information. Updated terminfos and termcaps # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps. # # Note that the xenl glitch in vt100 is not quite the same as on the Concept, # since the cursor is left in a different position while in the # weird state (concept at beginning of next line, vt100 at end # of this line) so all versions of vi before 3.7 don't handle # xenl right on vt100. The correct way to handle xenl is when # you output the char in column 80, immediately output CR LF # and then assume you are in column 1 of the next line. If xenl # is on, am should be on too. # # I assume you have smooth scroll off or are at a slow enough baud # rate that it doesn't matter (1200? or less). Also this assumes # that you set auto-nl to "on", if you set it off use vt100-nam # below. # # The padding requirements listed here are guesses. It is strongly # recommended that xon/xoff be enabled, as this is assumed here. # # The vt100 uses rs2 and rf rather than is2/tbc/hts because the # tab settings are in non-volatile memory and don't need to be # reset upon login. Also setting the number of columns glitches # the screen annoyingly. You can type "reset" to get them set. # # This is how the keypad gets assigned in Application Keypad mode. # PF1 = kf1 PF2 = kf2 PF3 = kf3 PF4 = kf4 # 7 = kf9 8 = kf10 9 = kf0 - # 4 = kf5 5 = kf6 6 = kf7 , = kf8 # 1 = ka1 2 = kb2 3 = ka3 # 0 = kc1 . = kc3 ENTER = kent # vt100|vt100-am|dec vt100 (w/advanced video):\ :am:mi:ms:xn:xo:\ :co#80:it#8:li#24:vt#3:\ :@8=\EOM:DO=\E[%dB:K1=\EOq:K2=\EOr:K3=\EOs:K4=\EOp:\ :K5=\EOn:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ :ae=^O:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\ :ct=\E[3g:do=^J:eA=\E(B\E)0:ho=\E[H:k0=\EOy:k1=\EOP:\ :k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOt:k6=\EOu:k7=\EOv:\ :k8=\EOl:k9=\EOw:k;=\EOx:kb=^H:kd=\EOB:ke=\E[?1l\E>:\ :kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:\ :md=\E[1m:me=\E[m\017:mr=\E[7m:nd=\E[C:\ :r2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:\ :..sa=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;:\ :sc=\E7:se=\E[m:sf=^J:so=\E[1;7m:sr=\EM:st=\EH:ta=^I:\ :ue=\E[m:up=\E[A:us=\E[4m: vt100nam|vt100-nam|vt100 w/no am (w/advanced video):\ :am@:xn@:\ :tc=vt100-am: # Ordinary vt100 in 132 column ("wide") mode. vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video):\ :co#132:li#24:\ :r2=\E>\E[?3h\E[?4l\E[?5l\E[?8h:tc=vt100-am: vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video):\ :co#132:li#14:vt@:\ :r2=\E>\E[?3h\E[?4l\E[?5l\E[?8h:tc=vt100-nam: # vt100 with no advanced video. vt100-nav|vt100 without advanced video option:\ :sg#1:\ :mb@:md@:me@:mr@:sa@:se=\E[m:so=\E[7m:ue@:us@:tc=vt100: vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option):\ :co#132:li#14:\ :tc=vt100-nav: # vt100 with one of the 24 lines used as a status line. # We put the status line on the top. vt100-s|vt100-s-top|vt100-top-s|vt100 for use with sysline:\ :es:hs:\ :li#23:\ :cl=\E[2;1H\E[J:cm=\E[%i%+^A;%dH:cs=\E[%i%i%d;%dr:\ :ds=\E7\E[1;24r\E8:fs=\E8:ho=\E[2;1H:\ :is=\E7\E[2;24r\E8:ts=\E7\E[1;%p1%dH\E[1K:tc=vt100-am: # Status line at bottom. # Clearing the screen will clobber status line. vt100-s-bot|vt100-bot-s|vt100 for use with sysline:\ :es:hs:\ :li#23:\ :ds=\E7\E[1;24r\E8:fs=\E8:is=\E[1;23r\E[23;1H:\ :ts=\E7\E[24;%p1%dH\E[1K:tc=vt100-am: # DEC VT100 with Advanced Video Option -- NOT DEC'S ENTRY!!! # This may be used as an alternate vt102 entry; it's probably better than the # stock one if you can live with XON/XOFF. All the AVO gave you was smul/rmul. # From: Doug Gwyn <gwyn@smoke.brl.mil> 25 Jan 93 # The following SET-UP modes are assumed for normal operation: # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS # WRAP_AROUND_ON # Other SET-UP modes may be set for operator convenience or communication # requirements; I recommend # SMOOTH_SCROLL AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF # SHIFTED_3_# # Unless you have a graphics add-on such as Digital Engineering's VT640 # (and even then, whenever it can be arranged!) you should set # INTERLACE_OFF # Hardware tabs are assumed to be set every 8 columns; they can be set up # by the "reset", "tset", or "tabs" utilities (use vt100-x, 132 columns, for # this). I have included some compatible code in "rs" for the VT640 if you # have one. No delays are specified; use "stty ixon -ixany" to enable DC3/DC1 # flow control! # Thanks to elsie!ado (Arthur David Olson) for numerous improvements. vt100-avo|DEC VT100 with AVO:\ :ms:xo:\ :co#80:it#8:li#24:vt#3:\ :DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:as=^N:\ :bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\ :cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:do=^J:ho=\E[H:\ :is=\E<\E)0:k0=\EOP:k1=\EOQ:k2=\EOR:k3=\EOS:kb=^H:\ :kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\ :ku=\EOA:l0=PF1:l1=PF2:l2=PF3:l3=PF4:le=^H:ll=\E[24H:\ :mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nw=\EE:\ :rc=\E8:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:\ :ta=^I:te=150\E[?7h:ti=\E[?7l:ue=\E[m:up=\EM:\ :us=\E[4m: # Most of the `vt100' emulators out there actually emulate a vt102 # This entry (or vt102-nsgr) is probably the right thing to use for # these. vt102|dec vt102:\ :mi:\ :al=\E[L:dc=\E[P:dl=\E[M:ei=\E[4l:im=\E[4h:tc=vt100: # Many brain-dead PC comm programs that pretend to be `vt100-compatible' # fail to interpret the ^O and ^N escapes properly. Symptom: the sgr0 # string in the canonical vt100 entry above leaves the screen littered # with little snowflake or star characters (IBM PC ROM character \017 = ^O) # after highlight turnoffs. This entry should fix that, and even leave # ACS support working, at the cost of making multiple-highlight changes # slightly more expensive. # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995 vt102-nsgr|dec vt102 with ACS support disabled:\ :me=\E[m:sa@:tc=vt102: # VT125 Graphics CRT. Clear screen also erases graphics vt125|vt125 graphics terminal:\ :cl=\E[;H\E[2J\EPpS(E)\E\\:tc=vt100: # vt132 - like vt100 but slower and has ins/del line and such. # I'm told that smir/rmir are backwards in the terminal from the # manual and from the ANSI standard, this describes the actual # terminal. I've never actually used a vt132 myself, so this # is untested. # vt132|DEC vt132:\ :xn:\ :al=\E[L:dc=\E[P:dl=\E[M:ei=\E[4h:im=\E[4l:ip=:sf=\n:tc=vt100: # vt220: # This vt220 description maps F5--F9 to the second block of function keys # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping. # PF1--PF4 are used as F1--F4. # vt220|DEC VT220 in vt100 emulation mode:\ :am:mi:xn:xo:\ :co#80:li#24:vt#3:\ :@7=\E[4~:ac=kkllmmjjnnwwqquuttvvxx:ae=\E(B:al=\E[L:\ :as=\E(0:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:\ :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:\ :do=\E[B:ei=\E[4l:ho=\E[H:if=/usr/lib/tabset/vt100:\ :im=\E[4h:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:\ :k3=\EOR:k4=\EOS:k5=\E[17~:k6=\E[18~:k7=\E[19~:\ :k8=\E[20~:k9=\E[21~:k;=\E[29~:kD=\E[3~:kI=\E[2~:\ :kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:kh=\E[1~:kl=\E[D:\ :kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:\ :mr=\E[7m:nd=\E[C:\ :r2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:\ :rf=/usr/lib/tabset/vt100:\ :..sa=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;:\ :sc=\E7:se=\E[m:sf=20\ED:so=\E[7m:sr=14\EM:ta=^I:\ :ue=\E[m:up=\E[A:us=\E[4m:ve=\E[?25h:vi=\E[?25l: # # vt220d: # This vt220 description regards F6--F10 as the second block of function keys # at the top of the keyboard. This mapping follows the description given # in the VT220 Programmer Reference Manual and agrees with the labeling # on some terminals that emulate the vt220. There is no support for an F5. # See vt220 for an alternate mapping. # vt220d|DEC VT220 in vt100 mode with DEC function key labeling:\ :F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:\ :F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:\ :k5@:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\ :k;=\E[21~:tc=vt220: vt220nam|vt220-nam|v220n|VT220 in vt100 mode with no auto margins:\ :am@:\ :r2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h:tc=vt220: vt220-8|dec vt220 8 bit terminal:\ :5i:am:mi:ms:xn:xo:\ :co#80:it#8:li#24:\ :%0=\E[29~:%1=\E[28~:*6=\E[4~:@0=\E[1~:AL=\E[%dL:\ :DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\E[23~:F2=\E[24~:\ :F3=\E[25~:F4=\E[26~:F7=\E[31~:F8=\E[32~:F9=\E[33~:\ :FA=\E[34~:IC=\E[%d@:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:\ :SA=\E[?7h:UP=\E[%dA:\ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ :ae=^O:al=\E[L:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\ :ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:eA=\E)0:ec=\E[%dX:\ :ei=\E[4l:ho=\E[H:if=/usr/lib/tabset/vt100:im=\E[4h:\ :is=\E[?7h\E[>\E[?1h\E F\E[?4l:k1=\EOP:k2=\EOQ:\ :k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:k8=\E[19~:\ :k9=\E[20~:k;=\E[21~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\ :kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\ :l1=pf1:l2=pf2:l3=pf3:l4=pf4:le=^H:mb=\E[5m:md=\E[1m:\ :me=\E[0m:mr=\E[7m:nd=\E[C:nw=\EE:pf=\E[4i:po=\E[5i:\ :ps=\E[i:r1=\E[?3l:rc=\E8:sc=\E7:se=\E[27m:sf=\ED:\ :so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[24m:up=\E[A:\ :us=\E[4m:vb=\E[?5h\E[?5l: vt320|DEC VT320 in vt100 emulation mode:\ :tc=vt220: # # Use v320n for LYRIX # vt320nam|vt320-nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode:\ :am@:\ :r2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h:tc=vt220: vt420|DEC VT420:\ :am:mi:xn:xo:\ :co#80:li#24:vt#3:\ :*6=\E[4~:@0=\E[1~:\ :S5=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ :ae=\E(B:al=\E[L:as=\E(0:bl=^G:cd=\E[J:ce=\E[K:\ :cl=\E[;H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\ :dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:\ :i2=\E[?67h\E[64;1"p:if=/usr/lib/tabset/vt100:\ :im=\E[4h:is=\E[1;24r\E[24;1H:k0=\E[29~:k1=\EOP:\ :k2=\EOQ:k3=\EOR:k4=\EOS:k5=\E[17~:k6=\E[18~:\ :k7=\E[19~:k8=\E[20~:k9=\E[21~:k;=\E[29~:kD=\E[3~:\ :kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:ke=\E>:\ :kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:le=^H:mb=\E[5m:\ :md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\ :r3=\E[?67h\E[64;1"p:rc=\E8:rf=/usr/lib/tabset/vt100:\ :..sa=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;:\ :se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:\ :up=\E[A:us=\E[4m: vt420nam|vt420-nam|v420n|DEC VT420 in vt100 emul. mode with NO AUTO WRAP mode:\ :am@:\ :tc=vt420: # # DECUDK # if (key < 16) then value = key; # else if (key < 21) then value = key + 1; # else if (key < 25) then value = key + 2; # else if (key < 27) then value = key + 3; # else if (key < 30) then value = key + 4; # else value = key + 5; # vt420pc|DEC VT420 w/PC keyboard:\ :@7=\E[4~:F1=\E[23~:F2=\E[24~:F3=\E[11;2~:\ :F4=\E[12;2~:F5=\E[13;2~:F6=\E[14;2~:F7=\E[15;2~:\ :F8=\E[17;2~:F9=\E[18;2~:FA=\E[19;2~:FB=\E[20;2~:\ :FC=\E[21;2~:FD=\E[23;2~:FE=\E[24;2~:FF=\E[23~:\ :FG=\E[24~:FH=\E[25~:FI=\E[26~:FJ=\E[28~:FK=\E[29~:\ :FL=\E[31~:FM=\E[32~:FN=\E[33~:FO=\E[34~:FP=\E[35~:\ :FQ=\E[36~:FR=\E[23;2~:FS=\E[24;2~:FT=\E[25;2~:\ :FU=\E[26;2~:FV=\E[28;2~:FW=\E[29;2~:FX=\E[31;2~:\ :FY=\E[32;2~:FZ=\E[33;2~:Fa=\E[34;2~:Fb=\E[35;2~:\ :Fc=\E[36;2~:S6=USR_TERM\072vt420pcdos\072:k1=\E[11~:\ :k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:k6=\E[17~:\ :k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:kD=^_:\ :kh=\E[H:\ :..px=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\:tc=vt420: vt420pcdos|DEC VT420 w/PC for DOS Merge:\ :li#25:\ :S1=%?%p2%{19}%=%t\E\023\021%e%p2%{32}%<%t\E%p2%c%e%p2%{127}%=%t\E\177%e%p2%c%;:\ :S4=\E[?1;2r\E[34h:\ :S5=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:S6@:\ :me=\E[0m:sa@:tc=vt420pc: vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys:\ :F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:\ :F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:\ :k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\ :k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:\ :kD=^_:kh=\E[H:l1=\EOP:l2=\EOQ:l3=\EOR:l4=\EOS:tc=vt420: vt420f-nam|v420fn|DEC VT420 no auto margins:\ :am@:\ :tc=vt420f: vt420pc-nam|v420pcn|DEC VT420 PC keyboard no auto margins:\ :am@:\ :tc=vt420pc: vt510|DEC VT510:\ :tc=vt420: vt510nam|vt510-nam|v510n|DEC VT510 in vt100 emul. mode with NO AUTO WRAP mode:\ :tc=vt420nam: vt510pc|DEC VT510 w/PC keyboard:\ :tc=vt420pc: vt510pc-nam|v510pcn|DEC VT510 PC keyboard no auto margins:\ :am@:\ :tc=vt420pc: vt510pcdos|DEC VT510 w/PC for DOS Merge:\ :tc=vt420pcdos: # VT520/VT525 # # The VT520 is a monochrome text terminal capable of managing up to # four independent sessions in the terminal. It has multiple ANSI # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console) # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950, # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only. # # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or # [Alt]/[Print Screen] depending upon which keyboard and which # terminal mode is being used. If Set-Up has been disabled or # assigned to an unknown key, Set-Up may be entered by pressing # [F3] as the first key after power up, regardless of keyboard type. vt520|DEC VT520:\ :am:mi:xn:xo:\ :co#80:li#24:vt#3:\ :*6=\E[4~:@0=\E[1~:\ :S5=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ :ae=\E(B:al=\E[L:as=\E(0:bl=^G:cd=\E[J:ce=\E[K:\ :cl=\E[;H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\ :dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:\ :i2=\E[?67h\E[64;1"p:if=/usr/lib/tabset/vt100:\ :im=\E[4h:is=\E[1;24r\E[24;1H:k0=\E[29~:k1=\EOP:\ :k2=\EOQ:k3=\EOR:k4=\EOS:k5=\E[17~:k6=\E[18~:\ :k7=\E[19~:k8=\E[20~:k9=\E[21~:k;=\E[29~:kD=\E[3~:\ :kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:kl=\E[D:\ :kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:\ :mr=\E[7m:nd=\E[C:\ :..px=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\:\ :r3=\E[?67h\E[64;1"p:rc=\E8:rf=/usr/lib/tabset/vt100:\ :..sa=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;:\ :se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:\ :up=\E[A:us=\E[4m: vt520nam|vt520-nam|v520n|DEC VT520 with NO AUTO WRAP:\ :am@:\ :tc=vt520: vt525|DEC VT525:\ :am:mi:xn:xo:\ :co#80:li#24:vt#3:\ :*6=\E[4~:@0=\E[1~:\ :S5=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ :ae=\E(B:al=\E[L:as=\E(0:bl=^G:cd=\E[J:ce=\E[K:\ :cl=\E[;H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\ :dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:\ :i2=\E[?67h\E[64;1"p:if=/usr/lib/tabset/vt100:\ :im=\E[4h:is=\E[1;24r\E[24;1H:k0=\E[29~:k1=\EOP:\ :k2=\EOQ:k3=\EOR:k4=\EOS:k5=\E[17~:k6=\E[18~:\ :k7=\E[19~:k8=\E[20~:k9=\E[21~:k;=\E[29~:kD=\E[3~:\ :kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:kl=\E[D:\ :kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:\ :mr=\E[7m:nd=\E[C:\ :..px=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\:\ :r3=\E[?67h\E[64;1"p:rc=\E8:rf=/usr/lib/tabset/vt100:\ :..sa=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;:\ :se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:\ :up=\E[A:us=\E[4m: vt525nam|vt525-nam|v525n|DEC VT525 with NO AUTO WRAP:\ :am@:\ :tc=vt525: #### Xterm variants # # X10/6.6 11/7/86, minus alternate screen, plus (csr) # (xterm: ":MT:" changed to ":km:"; mapped ":pt:" to ":it#8:"; # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E) # as these seem not to work -- esr) x10term|vs100-x10|xterm terminal emulator (X10 window system):\ :am:bs:km:mi:ms:pt:xn:xo:\ :co#80:it#8:li#65:\ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:al=\E[L:cd=\E[J:\ :ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cs=\E[%i%d;%dr:\ :dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:im=\E[4h:\ :is=\E\E[m\E[?7h\E[?1;4l:k1=\EOP:k2=\EOQ:k3=\EOR:\ :k4=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:\ :ks=\E[?1h\E=:ku=\EOA:le=^H:md=\E[1m:me=\E[m:\ :mr=\E[7m:nd=\E[C:\ :rs=\E[r\E<\E[m\E[H\E[2J\E[?7h\E[?1;3;4;6l:se=\E[m:\ :sf=^J:so=\E[7m:sr=\EM:ue=\E[m:up=\E[A:us=\E[4m: # X11R6 xterm. This is known good for the XFree86 version under Linux. # From: Eric S. Raymond <esr@snark.thyrsus.com> 9 Jul 1995 # Note: If you use the line-drawing character set, the disable afterwards # will leave you in US-ASCII. If you live somewhere that wants a pound sign # at 2/3, change rmacs to "\E(A". Further note: cuf and cub don't seem # to be reliable under my xterm, so they're commented out. Final note: # Older versions of this entry set/reset application keypad mode (\EO-prefix # cursor keys) in the [sr]mkx caps, but it wasn't necessary, and doesn't # actually fit the terminfo model properly. xterm|vs100|xterm terminal emulator (X11R6 Window System):\ :am:bs:km:mi:ms:pt:xn:xo:\ :co#80:it#8:li#65:\ :@7=\E[[:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:F1=\E[23~:\ :F2=\E[24~:IC=\E[%d@:LE=\E[%dD:UP=\E[%dA:\ :ac=++\054\054..00II--``aaffgghhjjkkllmmnnooqqssttuuvvwwxx~~:\ :ae=\E(B:al=\E[L:as=\E(0:bl=^G:cd=\E[J:ce=\E[K:\ :cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\ :ct=\E[3k:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:\ :ic=\E[@:im=\E[4h:\ :is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l:\ :k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\ :k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:\ :kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:kh=\E[@:\ :kl=\E[D:kr=\E[C:ku=\E[A:le=^H:md=\E[1m:me=\E[m:\ :mr=\E[7m:nd=\E[C:\ :r2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<:\ :rc=\E8:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:ta=^I:\ :te=\E[2J\E[?47l\E8:ti=\E7\E[?47h:u6=\E[%d;%dR:\ :u7=\E[6n:u8=\E[?1;2c:u9=\E[c:ue=\E[m:up=\E[A:\ :us=\E[4m: xterm24|vs100-24|xterm terminal emulator (24 lines) (X11R6 window system):\ :co#80:li#24:\ :tc=xterm: xterm25|vs100-25|xterm terminal emulator (25 lines) (X11R6 window system):\ :co#80:li#25:\ :tc=xterm: xterm50|vs100-50|xterm terminal emulator (50 lines) (X11R6 window system):\ :co#80:li#50:\ :tc=xterm: xterms|vs100s|xterm terminal emulator (small) (X11R6 window system):\ :tc=xterm24: # (kterm: this had unknown capabilities ":KJ:TY=ascii:" -- esr) kterm|kterm kanji terminal emulator (X window system):\ :es:hs:\ :cs=\E[%i%d;%dr:ds=\E[?H:fs=\E[?F:rc=\E8:sc=\E7:\ :ts=\E[?E\E[?%i%dT:tc=xterm: # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file xterm-nic|xterm with ich/ich1 suppressed for non-curses programs:\ :IC@:ei=:ic@:im=:tc=xterm: # From: Eric S. Raymond <esr@snark.thyrsus.com> May 4 1995 # Should work with the color xterm on the X11R6 contrib tape. xterm-color|xterm with color support:\ :tc=xterm:tc=ansi-pc-color: # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995 # Here's a termcap entry I've been using for xterm_color, which comes # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the # color stuff, I also have a status line defined as the window manager # title bar. [I have translated it to terminfo -- ESR] xterm-pcolor|xterm with color used for highlights and status line:\ :hs:\ :ws#40:\ :ds=\E]0;\007:fs=^G:md=\E[1m\E[43m:mr=\E[7m\E[34m:\ :so=\E[7m\E[31m:ts=\E]0;:us=\E[4m\E[42m:tc=xterm: ######## UNIX VIRTUAL TERMINALS AND VIRTUAL CONSOLES # # Columbus UNIX virtual terminal. This terminal also appears in # UNIX 4.0 and successors as line discipline 1 (?), but is # undocumented and does not really work quite right. cbunix|cb unix virtual terminal:\ :am:bs:da:db:\ :co#80:li#24:lm#0:\ :al=\EP:bl=^G:cd=\EL:ce=\EK:cl=\EL:cm=\EG%r%.%.:\ :cr=^M:dc=\EM:dl=\EN:do=^J:ei=:ic=\EO:im=:kd=\EB:\ :kh=\EE:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:se=\Eb^D:\ :sf=^J:so=\Ea^D:ue=\Eb^A:up=\EA:us=\Ea^A: # (vremote: removed obsolete ":nl@:" -- esr) vremote|virtual remote terminal:\ :am@:\ :co#79:\ :tc=cbunix: pty|4bsd pseudo teletype:\ :cm=\EG%+ %+ :se=\Eb$:so=\Ea$:ue=\Eb!:us=\Ea!:tc=cbunix: # Entries for use by the FSF's `screen' program. These came with version 3.6.2 screen|VT 100/ANSI X3.64 virtual terminal:\ :am:km:mi:ms:xn:\ :co#80:it#8:li#24:\ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\E[23~:\ :F2=\E[24~:IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~..--++\054\054hhII00:\ :ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:\ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\ :ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:\ :im=\E[4h:is=\E)0:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\ :k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\ :k;=\E[21~:kD=\E[3~:kH=\E[4~:kI=\E[2~:kN=\E[6~:\ :kP=\E[5~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kh=\E[1~:\ :kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:\ :md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nw=\EE:r2=\Ec:\ :rc=\E8:sc=\E7:se=\E[23m:sf=^J:so=\E[3m:sr=\EM:\ :st=\EH:ta=^I:ue=\E[24m:up=\EM:us=\E[4m: screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols:\ :am:km:mi:ms:xn:\ :co#132:it#8:li#24:\ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\E[23~:\ :F2=\E[24~:IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~..--++\054\054hhII00:\ :ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:\ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\ :ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:\ :im=\E[4h:is=\E)0:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\ :k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\ :k;=\E[21~:kD=\E[3~:kH=\E[4~:kI=\E[2~:kN=\E[6~:\ :kP=\E[5~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kh=\E[1~:\ :kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:\ :md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nw=\EE:r2=\Ec:\ :rc=\E8:sc=\E7:se=\E[23m:sf=^J:so=\E[3m:sr=\EM:\ :st=\EH:ta=^I:ue=\E[24m:up=\EM:us=\E[4m: ######## WORKSTATION CONSOLES # #### Sun consoles # # :is: resets scrolling region in case a previous user had used "tset vt100" # (sun: mapped ":pt:" to ":it#8:" -- esr) oldsun|Sun Microsystems Workstation console:\ :am:bs:km:mi:ms:pt:\ :co#80:it#8:li#34:\ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:al=\E[L:\ :bl=^G:cd=\E[J:ce=\E[K:cl=^L:cm=\E[%i%d;%dH:cr=^M:\ :dc=\E[P:dl=\E[M:do=\E[B:ei=:ic=\E[@:im=:is=\E[1r:\ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kd=\E[B:kh=\E[H:\ :kl=\E[D:kr=\E[C:ku=\E[A:le=^H:nd=\E[C:rs=\E[1r:\ :se=\E[m:sf=^J:so=\E[7m:ta=^I:up=\E[A: # New entry from vendor sun|sun1|sun2|Sun Microsystems Inc. workstation:\ :am:km:ms:\ :co#80:li#34:\ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:al=\E[L:\ :bl=^G:cd=\E[J:ce=\E[K:cl=^L:cm=\E[%i%d;%dH:cr=^M:\ :dc=\E[P:dl=\E[M:do=^J:ei=:ho=\E[H:ic=\E[@:im=:\ :k1=\E[224z:k2=\E[225z:k3=\E[226z:k4=\E[227z:\ :k5=\E[228z:k6=\E[229z:k7=\E[230z:k8=\E[231z:\ :k9=\E[232z:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\ :md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:r2=\E[s:\ :..sa=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m:\ :se=\E[m:sf=^J:so=\E[7m:ta=^I:ue=\E[m:up=\E[A:\ :us=\E[4m: # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985 sun-s|Sun Microsystems Workstation window with status line:\ :hs:\ :ds=\E]l\E\\:fs=\E\\:ts=\E]l:tc=sun: sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs:\ :hs:\ :ds=\E]l\E\\:fs=\E\\:ts=\E]l:tc=sun-e: sun-48|Sun 48-line window:\ :co#80:li#48:\ :tc=sun: sun-34|Sun 34-line window:\ :co#80:li#34:\ :tc=sun: sun-24|Sun 24-line window:\ :co#80:li#24:\ :tc=sun: sun-17|Sun 17-line window:\ :co#80:li#17:\ :tc=sun: sun-12|Sun 12-line window:\ :co#80:li#12:\ :tc=sun: sun-1|Sun 1-line window for sysline:\ :es:hs:\ :co#80:li#1:\ :ds=^L:fs=\E[K:ts=^M:tc=sun: sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character:\ :ei@:ic@:im@:tc=sun: sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history:\ :te=\E[>4h:ti=\E[>4l:tc=sun: #### Iris consoles # # (wsiris: this had unknown capabilities # :HS=\E7F2:HE=\E7F7:\ # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite: # I mapped ":pt:" to ":it#8:", removed incorrect ":cl=\Ev:" -- esr) wsiris|iris40|iris emulating a 40 line visual 50 (approximately):\ :am:bs:pt:\ :co#80:it#8:li#40:\ :al=\EL:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :dl=\EM:\ :ho=\EH:is=\E7B0\E7F7\E7C2\E7R3:k0=\E0:k1=\E1:k2=\E2:\ :k3=\E3:k4=\E4:k5=\E5:k6=\E6:k7=\E7:k8=\E8:k9=\E9:\ :kd=\EB:kl=\ED:kr=\EC:ku=\EA:nd=\EC:se=\E0@:so=\E9P:\ :sr=\EI:ue=\E7R3\E0@:up=\EA:us=\E7R2\E9P:ve=\E>:\ :vs=\E;: #### Masscomp consoles # masscomp2:\ :co#64:li#21:\ :tc=masscomp: masscomp1:\ :co#104:li#36:\ :tc=masscomp: # (masscomp: ":MT:" changed to ":km:"; mapped ":pt:" to ":it#8:" -- esr) masscomp:\ :bs:km:mi:pt:\ :co#80:it#8:li#24:sg#0:\ :al=\E[L:cd=\E[J:ce=\E[K:cl=\E[2J:cm=\E[%i%d;%dH:\ :dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:im=\E[4h:\ :is=\EGc\EGb\EGw:kb=^H:kd=\EOB:kl=\EOD:kr=\EOC:\ :ku=\EOA:nd=\E[C:se=\E[0m:so=\E[7m:ue=\EGau:up=\E[A:\ :us=\EGu: #### NeWS consoles # # Console terminal windows under the NeWS (Sun's Display Postscript windowing # environment). Note: these have nothing to do with Sony's News workstation # line. # # Entry for NeWS's psterm from Eric Messick & Hugh Daniel # (psterm: unknown ":sl=\EOl:el=\ENl:" removed; # mapped ":pt:" to ":it#8:" -- esr) psterm|psterm-basic|psterm-80x34:\ :am:bs:hs:km:pt:ul:\ :co#80:it#8:li#34:\ :al=\EA:cd=\EB:ce=\EC:cl=^L:cm=\E%d;%d;:cs=\EE%d;%d;:\ :dc=\EF:dl=\EK:do=\EP:ei=\ENi:fs=\ENl:ho=\ER:im=\EOi:\ :is=\EN*:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=\ET:\ :ll=\EU:mb=\EOb:md=\EOd:me=\EN*:mr=\EOr:nd=\EV:rc=^\:\ :rs=\EN*:sc=^]:se=\ENo:sf=\EW:so=\EOo:sr=\EX:te=\ENt:\ :ti=\EOt:ts=\EOl:ue=\ENu:up=\EY:us=\EOu:vb=\EZ: psterm-96x48:\ :co#96:li#48:\ :tc=psterm: psterm-90x28:\ :co#90:li#28:\ :tc=psterm: psterm-80x24:\ :co#80:li#24:\ :tc=psterm: # This is a faster termcap for psterm. Warning: if you use this termcap, # some control characters you type will do strange things to the screen. # (psterm-fast: unknown ":sl=^Ol:el=^Nl:"; # removed; mapped ":pt:" to ":it#8:" -- esr) psterm-fast:\ :am:bs:hs:km:pt:ul:\ :co#80:it#8:li#34:\ :al=^A:cd=^B:ce=^C:cl=^L:cm=\004%d;%d;:cs=\005%d;%d;:\ :dc=^F:dl=^K:do=^P:ei=^Ni:fs=^Nl:ho=^R:im=^Oi:is=^N*:\ :kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=^T:ll=^U:mb=^Ob:\ :md=^Od:me=^N*:mr=^Or:nd=^V:rc=^\:rs=^N*:sc=^]:\ :se=^No:sf=^W:so=^Oo:sr=^X:te=^Nt:ti=^Ot:ts=^Ol:\ :ue=^Nu:up=^Y:us=^Ou:vb=^Z: #### Apollo consoles # # Apollo got bought by Hewlett-Packard. The Apollo workstations are # labeled HP700s now. # # From: Gary Darland <goodmanc@garnet.berkeley.edu> apollo:\ :am:bs:mi:\ :co#88:li#53:\ :al=\EI:cd=\EJ:ce=\EK:ch=\EN%d:cl=^L:cm=\EM%+ %d):\ :cv=\EO+ :dc=\EP:dl=\EL:do=\EB:ei=\ER:im=\EQ:nd=\EC:\ :se=\ET:sf=\EE:so=\ES:sr=\ED:te=\EX:ti=\EW:ue=\EV:\ :up=\EA:us=\EU: apollo_15P|apollo 15 inch display:\ :dN@:\ :tc=vt132: apollo_19L|apollo 19 inch display:\ :dN@:\ :tc=vt132: apollo_color|apollo color display:\ :dN@:\ :tc=vt132: #### Fortune Systems consoles # # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983 # (This had unknown capabilities # :rv=\EH:re=\EI:rg=0:\ # :GG=0:GV=-:GH=&:GU=%:GD=#:G1=(:G2= :G3=":G4=*:CF=\E]:\ # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\ # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\ # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F: # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily) # to force both magic cookie glitches off. Once upon a time, I # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are # function keys; thus the "Al" value for HM was certainly an error. I renamed # EN/PD/PU/CO/CF according to the XENIX/TC mappings, but not HM/DL/RF/RC/RT. # I think rv and re are start and end reverse video and rg is a nonexistent # "reverse-video-glitch" capability; I have put rv and re in with standard # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr) fos|fortune|Fortune system:\ :am:bs:bw:\ :co#80:li#25:\ :@7=^Ak\r:ae=^O:al=\034E:as=\Eo:bl=^G:cd=\034Y:\ :ce=^\Z:cl=\014:cm=\034C%+ %+ :cr=^M:dc=\034W:\ :dl=\034R:do=\n:ei=:ho=\036:ic=\034Q:im=:is=^_..:\ :k1=^Aa\r:k2=^Ab\r:k3=^Ac\r:k4=^Ad\r:k5=^Ae\r:\ :k6=^Af\r:k7=^Ag\r:k8=^Ah\r:kN=^Ao\r:kP=^An\r:kb=^H:\ :kd=^Ay\r:kh=^A?\r:kl=^Aw\r:kr=^Az\r:ku=^Ax\r:le=^H:\ :mb=\EN:me=\EI:mr=\EH:nw=^M^J:se=^\I`:sf=^J:so=^\H`:\ :ta=^Z:ue=^\IP:up=\013:us=^\HP:ve=\E\\:vi=\E]:\ :vs=\E\072: ######## COMMON TERMINAL TYPES # # This section describes terminal classes and maker brands that are still # quite common, but have proprietary command sets not blessed by ANSI. #### Altos # # Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993 # His comments suggest they were shipped with the system. # # (altos2: had unknown capabilities # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\ # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\ # :HL=^AP\r:SP=\E[i:\ # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\ # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\ # Comparison with the k* capabilities makes it obvious that the c* things are # shift keys. I have renamed them to keys 32 and up accordingly. Also, # :sr: was given as a boolean-- esr) altos2|alt2|altos-2|altos II:\ :co#80:it#8:li#24:sg#0:\ :*5=^Am\r:*8=^An\r:DL=\E[M:FM=^A`\r:FN=^Aa\r:\ :FO=^Ab\r:FP=^Ac\r:FQ=^Ad\r:FR=^Ae\r:FS=^Af\r:\ :FT=^Ag\r:FU=^Ah\r:FV=^Ai\r:FW=^Aj\r:FX=^Ak\r:\ :al=\E[L:cd=\E[J:ce=\E[K:cl=\E[;H\E[2J:\ :cm=\E[%i%d;%dH:cr=^M:dc=\E[P:do=\E[1B:ei=:ho=\E[H:\ :ic=\E[@:if=/usr/share/lib/tabset/vt100:im=:\ :is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:k0=^AI\r:\ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:\ :k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:kA=^AJ\r:\ :kB=^AK\r:kC=^AL\r:kD=^AM\r:kE=^AN\r:kF=^AO\r:kb=^H:\ :kd=\E[B:kh=\E[f:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\ :nd=\E[1C:nw=^M^J:se=\E[m:sf=^J:so=\E[7m:ta=^I:\ :ue=\E[m:up=\E[1A:us=\E[4m: # (altos3: had unknown capabilities # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\ # :HL=^AP\r:SP=\E[i:\ # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\ # Comparison with the k* capabilities makes it obvious that the c* things are # shift keys. I have renamed them to keys 32 and up accordingly -- esr) altos3|alt3|altos-3|altos III:\ :co#80:it#8:li#24:sg#0:\ :*5=^Am\r:*8=^An\r:DL=\E[M:FM=^A`\r:FN=^Aa\r:\ :FO=^Ab\r:FP=^Ac\r:FQ=^Ad\r:FR=^Ae\r:FS=^Af\r:\ :FT=^Ag\r:FU=^Ah\r:FV=^Ai\r:FW=^Aj\r:FX=^Ak\r:\ :al=\E[L:cd=\E[J:ce=\E[K:cl=\E[;H\E[2J:\ :cm=\E[%i%d;%dH:cr=^M:dc=\E[P:do=\E[1B:ei=:ho=\E[H:\ :ic=\E[@:if=/usr/share/lib/tabset/vt100:im=:\ :is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:k0=^AI\r:\ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:\ :k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:kA=^AJ\r:\ :kB=^AK\r:kC=^AL\r:kD=^AM\r:kE=^AN\r:kF=^AO\r:kb=^H:\ :kd=\E[B:kh=\E[f:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\ :mb=\E[5p:me=\E[p:nd=\E[1C:nw=^M^J:se=\E[m:sf=^J:\ :so=\E[7m:sr=\EM:ta=^I:ue=\E[m:up=\E[1A:us=\E[4m: altos4|alt4|altos-4|altos IV:\ :tc=wy50: altos5|alt5|altos-5|altos V:\ :tc=altos3: # (altos7: had unknown capabilities: # :GG#0:GS=\EH^B:GE=\EH^C:\ # :G1=3:G2=2:G3=1:G4=5:GD=0:GU==:GH=\072:\ # :GV=6:GR=4:GL=9:GC=8:GI=\EH8:GF=\EH7:\ # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: # :PD=\EK:PU=\EJ:PN=\Ed#:PS=\EJ:DL=\ER:\ # Comparison with the k* capabilities makes it obvious that the c* things are # shift keys. I have renamed them to keys 32 and up accordingly -- esr) altos7|alt7|altos VII:\ :am:mi:\ :co#80:li#24:sg#0:\ :*5=^Am\r:*8=^An\r:DL=\ER:FM=^A`\r:FN=^Aa\r:FO=^Ab\r:\ :FP=^Ac\r:FQ=^Ad\r:FR=^Ae\r:FS=^Af\r:FT=^Ag\r:\ :FU=^Ah\r:FV=^Ai\r:FW=^Aj\r:FX=^Ak\r:al=\EE:cd=\EY:\ :ce=\ET:cl=\E+^^:cm=\E=%+ %+ :cr=^M:dc=\EW:do=^J:\ :ei=\Er:ho=^^:im=\Eq:\ :is=\E`\072\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2:k0=^AI\r:\ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:\ :k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:kA=^AJ\r:\ :kB=^AK\r:kC=^AL\r:kD=^AM\r:kE=^AN\r:kF=^AO\r:kb=^H:\ :kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:mb=\EG2:md=\EGt:\ :me=\EG0:mh=\EGp:mk=\EG1:mr=\EG4:nd=^L:nw=^M^J:\ :se=\EG0:sf=^J:so=\EG4:sr=\Ej:ta=^I:ue=\EG0:up=^K:\ :us=\EG8: altos7pc|alt7pc|altos PC VII:\ :@7=\ET:tc=altos7: #### Hewlett-Packard (hp) # # Hewlett-Packard # 8000 Foothills Blvd # Roseville, CA 95747 # Vox: 1-(916)-785-4363 (Technical response line for VDTs) # 1-(800)-633-3600 (General customer support) # # Generic HP terminal - this should (hopefully) work on any HP terminal. hpgeneric|hewlett-packar|hewlettpackard:\ :am:da:db:mi:xs:\ :co#80:li#24:lm#0:vt#6:\ :al=\EL:bl=^G:cd=\EJ:ce=\EK:ch=\E&a%dC:cl=\EH\EJ:\ :cm=\E&a%r%dc%dY:cr=^M:ct=\E3:cv=\E&a%dY:dc=\EP:\ :dl=\EM:do=^J:ei=\ER:im=\EQ:kB=\Ei:kb=^H:le=^H:\ :nd=\EC:se=\E&d@:sf=^J:so=\E&dJ:st=\E1:ta=^I:\ :ue=\E&d@:up=\EA:us=\E&dD: hp110|hewlett-packard model 110 portable:\ :li#16:\ :tc=hpgeneric: hp+pfk+cr|hp function keys with CR:\ :k1=\Ep\r:k2=\Eq\r:k3=\Er\r:k4=\Es\r:k5=\Et\r:\ :k6=\Eu\r:k7=\Ev\r:k8=\Ew\r: hp+pfk-cr|hp function keys w/o CR:\ :k1=\Ep:k2=\Eq:k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:\ :k8=\Ew: # The 2621s use the same keys for the arrows and function keys, # but not separate escape sequences. These definitions allow the # user to use those keys as arrow keys rather than as function # keys. hp+pfk+arrows|hp alternate arrow definitions:\ :k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:kF=\Er\r:kH=\Eq\r:\ :kR=\Es\r:kd=\Ew\r:kh=\Ep\r:kl=\Eu\r:kr=\Ev\r:\ :ku=\Et\r: hp+arrows|hp arrow definitions:\ :kF=\ES:kH=\EF:kR=\ET:kd=\EB:kh=\Eh:kl=\ED:kr=\EC:\ :ku=\EA: # Generic stuff from the HP 262x series # hp262x:\ :xs:\ :cd=\EJ:dc=\EP:ip=:kA=\EL:kD=\EP:kE=\EK:kF=\ES:\ :kI=\EQ:kL=\EM:kM=\ER:kN=\EU:kP=\EV:kR=\ET:kS=\EJ:\ :kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:ks=\E&s1A:\ :ku=\EA:mb=\E&dA:me=\E&d@:mk=\E&dS:mr=\E&dB:\ :..sa=\E&d%'@'%?%p1%t%'B'%|%;%?%p2%t%'D'%|%;%?%p3%t%'B'%|%;%?%p4%t%'A'%|%;%c:\ :se=\E&d@:sf=\ES:so=\E&dB:ta=\011:ue=\E&d@:us=\E&dD: # Note: no "home" on HP's since that homes to top of memory, not screen. # Due to severe 2621 braindamage, the only way to get the arrow keys to # transmit anything at all is to turn on the function key labels # with smkx, and even then the user has to hold down shift! # The default 2621 turns off the labels except when it has to to # enable the function keys. If your installation prefers labels # on all the time, or off all the time (at the "expense" of the # function keys) move the # 2621-nl or 2621-wl labels to the # front using reorder. # Note: there are newer ROMs for 2621's that allow you to set # strap A so the regular arrow keys xmit \EA, etc, as with the # 2645. However, even with this strap set, the terminal stops # xmitting if you reset it, until you unset and reset the strap! # Since there is no way to set/unset the strap with an escape # sequence, we don't use it in the default. # If you like, you can use 2621-ba (braindmaged arrow keys). hp2621-ba|2621-ba|2621 w/new rom and strap A set:\ :ke@:ks@:tc=hp+arrows:tc=hp2621: # 2621 with function labels. Most of the time they are off, # but inside vi, the function key labels appear. You have to # hold down shift to get them to xmit. hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels:\ :is=\E&jA\r:ke=\E&jA:tc=hp2621-fl: # 2621 with function labels. Most of the time they are off, # but inside vi, the function key labels appear. You have to # hold down shift to get them to xmit. hp2621-fl|2621-fl|hp 2621:\ :xo:xs@:\ :pb#19200:\ :bt=\Ei:cm=\E&a%r%dc%dY:dc=\EP:ip=:is=\E&j@\r:\ :ke=\E&j@:ks=\E&jB:me=\E&d@:se=\E&d@:so=\E&dD:\ :ta=\011:ue=\E&d@:us=\E&dD:tc=hp+pfk+cr:tc=hpgeneric: # To use 2621p printer, setenv TERM=2621p, PRINTER=2612p hp2621p|2621p|2621P|hp 2621 with printer:\ :pf=\E&p13C:po=\E&p11C:tc=hp2621: hp2621p-a|2621p-a|hp2621p with fn as arrows:\ :tc=hp+pfk+arrows:tc=hp2621p: # hp2621 with k45 keyboard hp2621-k45|hp2621k45|2621k45|k45|hp 2621 with 45 keyboard:\ :kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:\ :ks=\E&s1A:ku=\EA:tc=hp2621: # This terminal should be used at 4800 baud or less. It needs padding for # plain characters at 9600, I guessed at an appropriate cr delay. It really # wants ^E/^F handshaking, but that doesn't work well even if you write # software to support it. hp2645|hp45|hp 264x series:\ :pb#9600:\ :cr=\r:kA=\EL:kD=\EP:kE=\EK:kF=\ES:kI=\EQ:kL=\EM:\ :kM=\ER:kN=\EU:kP=\EV:kR=\ET:kS=\EJ:kT=\E1:kd=\EB:\ :ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:ks=\E&s1A:kt=\E2:\ :ku=\EA:mb=\E&dA:me=\E&d@:mh=\E&dH:mr=\E&dB:\ :..sa=\E&d%'@'%?%p1%t%'B'%|%;%?%p2%t%'D'%|%;%?%p3%t%'B'%|%;%?%p4%t%'A'%|%;%?%p5%t%'H'%|%;%?%p6%t%'B'%|%;%c:\ :us=\E&dD:tc=hpgeneric: # Hp 2624 B with 4 or 10 pages of memory. # # Some assumptions are made with this entry. These settings are # NOT set up by the initialization strings. # # Port Configuration # RecvPace=Xon/Xoff # XmitPace=Xon/Xoff # StripNulDel=Yes # # Terminal Configuration # InhHndShk=Yes # InhDC2=Yes # XmitFnctn(A)=No # InhEolWrp=No # # Note: the 2624 DOES have a true "home," believe it or not! # # The 2624 has an "error line" to which messages can be sent. # This is CLOSE to what is expected for a "status line". However, # after a message is sent to the "error line", the next carriage # return is EATEN and the "error line" is turned back off again! # So I guess we can't define hs, eslok, wsl, dsl, fsl, tsl # # This entry supports emacs (and any other program that uses raw # mode) at 4800 baud and less. I couldn't get the padding right # for 9.6. # hp2624|hp2624a|hp2624b|hp2624b-4p|2624-4p|2624|2624a|2624b|Hewlett Packard 2624 B:\ :da:db:\ :lm#96:\ :vb=\E&w13F\200\200\200\200\E&w12F\200\200\200\200\E&w13F\200\200\200\200\E&w12F:tc=hp+labels:tc=scrhp: # These attributes are not set above: # # civis, cmdch, cnorm, csr, cub, cud, cuf, cuu, cvvis, dch, dl, # ech, eo, eslok, fsl, gn, hc, hd, hu, hz, ich, ich1, if, il, in, # indn, iprog, is2, is3, it, ka1, ka3, kb2, kc1, kc3, kclr, kf0, # kf10, khts, km, ktbc, lf0, lf1, lf10, lf2, lf3, lf4, lf5, lf6, # lf7, lf8, lf9, mc5p, os, pad, pfkey*, pfloc*, pfx*, prot, rc, # rep, rin, rmcup, rmdc, rmm, rs2, rs3, sc, smcup, smdc, smm, tsl, # uc, ul, vt, wind, wsl, xenl, xmc, xsb, xt # # not needed if tset is used: # if=/usr/lib/tabset/std, # # This hp2626 entry does not use any of the fancy windowing stuff # of the 2626. # # Indeed, terminfo does not yet handle such stuff. Since changing # any window clears memory, it is probably not possible to use # this for screen opt. # # ed is incredibly slow most of the time - I am guessing at the # exact padding. Since the terminal uses xoff/xon this is intended # only for cost computation, so that the terminal will prefer el # or even dl1 which is probably faster! # # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only # extra slow # on the last line of the window. # # The padding probably should be changed. # hp2626|hp2626a|hp2626p|2626|2626a|2626p|2626A|2626P|hp 2626:\ :da:db:\ :lm#0:pb#19200:\ :SF=\E&r%dD:SR=\E&r%dU:cd=\ED\EJ\EC:ip=:is=\E&j@\r:tc=hp+pfk+cr:tc=hp+labels:tc=scrhp: # This entry is for sysline. It allocates a 23 line window with # a 115 line workspace for regular use, and a 1 line window for # the status line. # # This assumes port 2 is being used. # Turn off horizontal line, Create ws #1 with 115 lines, # Create ws #2 with 1 line, Create window #1 lines 1-23, # Create window #2 lines 24-24, Attach cursor to workspace #1. # Note that this clears the tabs so it must be done by tset before # it sets the tabs. # hp2626-s|2626-s|hp 2626 using only 23 lines:\ :es:hs:\ :li#23:\ :fs=\E&d@\E&w7f2p1I\E&w4f1I:\ :i1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I\n\E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r:\ :ts=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC:tc=hp2626: # Force terminal back to 24 lines after being 23. # hp2626-ns|2626-ns|hp 2626 using all 24 lines:\ :i1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I\n\E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r:tc=hp2626: # Various entries useful for small windows on 2626. # hp2626-12|2626-12:\ :li#12:\ :tc=hp2626: hp2626-12x40|2626-12x40:\ :co#40:li#12:\ :tc=hp2626: hp2626-x40|2626-x40:\ :co#40:\ :tc=hp2626: hp2626-12-s|2626-12-s:\ :li#11:\ :tc=hp2626-s: # You should use this terminal at 4800 baud or less. # hp2648|hp2648a|2648a|2648A|2648|HP 2648a graphics terminal:\ :cl=\EH\EJ:cm=\E&a%r%dc%dY:dc=\EP:ip=:tc=hp2645: # 2640a doesn't have the Y cursor addressing feature, and C is # memory relative instead of screen relative, as we need. # hp2640a|2640a|hp 2640a:\ :cm@:ke@:ks@:tc=hp2645: hp2640b|hp2644a|hp 264x series:\ :ke@:ks@:tc=hp2645: # 2621 using all 48 lines of memory, only 24 visible at any time. # hp2621-48|48 line 2621:\ :li#48:\ :cm=\E&a%r%dc%dR:cv=\E&a%dR:ho=\EH:tc=hp2621: # 2621 with no labels ever. Also prevents vi delays on escape. # hp2621-nl|hp 2621 with no labels:\ :kd@:ke@:kh@:kl@:kr@:ks@:ku@:tc=hp2621-fl: # Needed for UCB ARPAVAX console, since lsi-11 expands tabs # (wrong). # hp2621-nt|hp 2621 w/no tabs:\ :ta@:tc=hp2621: # The HP 150 terminal is a fairly vanilla HP terminal, with the # clreol standout problem. It also has graphics capabilities and # a touch screen, which we don't describe here. hp150|hewlett packard Model 150:\ :tc=hp2622: # Hp 2382a terminals, "the little ones." They don't have any # alternate character set support and sending out ^N/^O will # leave the screen blank. hp2382a|hp2382|hewlett packard 2382a:\ :da:db:\ :lh#1:lm#48:\ :ac@:ae@:as@:me=\E&d@:\ :..pn=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s:\ :..sa=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%'@'%+%e%'S'%;%e%?%ga%t%ga%'@'%+%e%'@'%;%;%c:tc=hp+labels:tc=scrhp: hp2621-a|hp2621a-a|2621-a|hp2621 with fn as arrows:\ :tc=hp+pfk+arrows:tc=hp2621-fl: # newer hewlett packard terminals newhpkeyboard|generic entry for HP extended keyboard:\ :kA=\EL:kB=\Ei:kC=\EJ:kD=\EP:kE=\EK:kF=\ET:kH=\EF:\ :kI=\EQ:kL=\EM:kM=\ER:kN=\EU:kP=\EV:kR=\ES:kS=\EJ:\ :kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:\ :ks=\E&s1A:ku=\EA:tc=hp+pfk-cr: newhp|generic entry for new hewlett packard terminals:\ :am:bw:mi:xo:xs:\ :co#80:li#24:pb#4800:\ :ac=T1R!U2S"W3O#V4P$t5u6w7v8\072'9(LQKWlRkT5I3@2[MAJSmFjGdHQ;Y+Z*X\0724>q\\\054x.n/:\ :ae=^O:al=\EL:as=^N:bl=^G:bt=\Ei:cd=\EJ:ce=\EK:cr=^M:\ :ct=\E3:dc=\EP:dl=\EM:do=^J:ei=\ER:i1=\E&jB:im=\EQ:\ :ip=:le=^H:mb=\E&dA:md=\E&dF:me=\E&d@\017:mh=\E&dH:\ :mk=\E&dS:mr=\E&dB:nd=\EC:nw=^M^J:\ :..pk=\E&f0a%p1%dk0d%p2%l%dL%p2%s:\ :..pl=\E&f1a%p1%dk0d%p2%l%dL%p2%s:\ :..px=\E&f2a%p1%dk0d%p2%l%dL%p2%s:r1=\Eg:\ :..sa=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%'@'%+%e%'S'%;%e%?%ga%t%ga%'@'%+%e%'@'%;%;%c%?%p9%t\016%e\017%;:\ :se=\E&d@:sf=^J:so=\E&dJ:sr=\ET:st=\E1:ta=\011:\ :ue=\E&d@:up=\EA:us=\E&dD:tc=newhpkeyboard: memhp|memory relative addressing for new HP ttys:\ :vt#6:\ :CM=\E&a%p1%dr%p2%dC:DO=\E&a+%dR:LE=\E&a-%dC:\ :RI=\E&a+%dC:UP=\E&a-%dR:ch=\E&a%dC:cl=\EH\EJ:\ :cm=\E&a%dr%dC:cv=\E&a%dR:ho=\EH:ll=\E&a23R\r:tc=newhp: scrhp|screen relative addressing for new HP ttys:\ :CM=\E&a%p1%dr%p2%dC:DO=\E&a+%dR:LE=\E&a-%dC:\ :RI=\E&a+%dC:UP=\E&a-%dR:ch=\E&a%dC:cl=\E&a0c0Y\EJ:\ :cm=\E&a%dy%dC:cv=\E&a%dY:ho=\E&a0y0C:ll=\E&a0y0C\EA:tc=newhp: hp+labels|"standard" label info for new HP ttys:\ :Nl#8:lh#2:lw#8:\ :LO=\E&jB:\ :..pn=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s: hp+printer| "standard" printer info for HP ttys:\ :ff=\E&p4u0C:pf=\E&p13C:po=\E&p11C:ps=\EH\E&p4dF: # The new hp2621b is kind of a cross between the old 2621 and the # new 262x series of machines. It has dip-switched options. # The firmware has a bug in it such that if you give it a null # length label, the following character is eaten! hp2621b|2621b|hp 2621b with old style keyboard:\ :Nl#8:lh#1:lm#48:lw#8:\ :LO=\E&jB:kF=\ET:kH=\EF:kR=\ES:kd=\EB:kh=\Eh:kl=\ED:\ :kr=\EC:ku=\EA:\ :..pn=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%'o'%p1%+%c\r:tc=hp2621: hp2621b-p|2621b-p|hp 2621b with printer:\ :tc=hp+printer:tc=hp2621b: # hp2621b - new 2621b with new extended keyboard # these are closer to the new 26xx series than the other 2621b hp2621b-kx|2621b-kx|hp 2621b with extended keyboard:\ :tc=newhpkeyboard:tc=hp2621b: hp2621b-kx-p|2621b-kx-p|hp 2621b with new keyboard & printer:\ :tc=hp+printer:tc=hp2621b-kx: # Some assumptions are made in the following entries. # These settings are NOT set up by the initialization strings. # # Port Configuration # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes # # Terminal Configuration # InhHndShk(G)=Yes InhDC2(H)=Yes # XmitFnctn(A)=No InhEolWrp=No # # # Hp 2622a & hp2623a display and graphics terminals # hp2622|hp2622a|2622|2622a|hp 2622:\ :da:db:\ :lm#0:pb#19200:\ :is=\E&dj@\r:tc=hp+pfk+cr:tc=hp+labels:tc=scrhp: # The 2623 is a 2622 with extra graphics hardware. hp2623|hp2623a|2623|2623a|hp 2623:\ :tc=hp2622: hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer:\ :tc=hp+printer:tc=hp2624: # The hewlett packard B can have an optional extra 6 pages of # memory. hp2624-10p|hp2624a-10p|hp2624b-10p|2624-10p|2624a-10p|2624b-10p|hewlett packard 2624 B w/ 10 pages of memory:\ :lm#240:\ :tc=hp2624: hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer:\ :lm#240:\ :tc=hp2624b-p: # Color manipulations for HP terminals hp+color|hp with colors:\ :cc:\ :Co#16:NC#17:pa#7:\ :..Ip=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a\n%?%p3%{1000}%=%t1%e.%p3%d%;b\n%?%p4%{1000}%=%t1%e.%p4%d%;c\n%?%p5%{1000}%=%t1%e.%p5%d%;x\n%?%p6%{1000}%=%t1%e.%p6%d%;y\n%?%p7%{1000}%=%t1%e.%p7%d%;z\n%p1%dI:\ :oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I:\ :op=\E&v0S:sp=\E&v%dS: # is2 set screen to be 80 columns wide hp2397a|2397a|hp2397|2397|hewlett packard 2397A color terminal:\ :is=\E&w6f80X:tc=memhp:tc=hp+labels:tc=hp+color: # HP 700/44 Setup parameters: # Terminal Mode HP-PCterm # Inhibit Auto Wrap NO # Status Line Host Writable # PC Character Set YES # Twenty-Five Line Mode YES # XON/XOFF @128 or 64 (sc) # Keycode Mode NO or YES (sc) # Backspace Key BS or BS/DEL # # is2 sets pcterm; autowrap; 25 lines; pc char set; prog DEL key; \E\\? # does not turn off keycode mode # smsc sets alternate start/stop; keycode on # hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode:\ :am:eo:xn:xo:\ :co#80:li#25:\ :@7=\E[4~:S4=\E[>11h\EPO**x0/65;1/67\E\\:\ :S5=\E[>11l\EP1**x0/11;1/13\E[0m\E\\:XF=g:XN=e:\ :ac=k\277l\332m\300j\331n\305w\302q\304u\264t\303v\301x\263:\ :al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[2J\E[H:\ :cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=\E[B:ei=:\ :ho=\E[H:ic=\E[@:im=:\ :is=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\:\ :k1=\E[17~:k2=\E[18~:k3=\E[19~:k4=\E[20~:k5=\E[21~:\ :k6=\E[23~:k7=\E[24~:k8=\E[25~:k9=\E[26~:k;=\E[28~:\ :kB=\E[Z:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:kh=\E[1~:\ :kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:nd=\E[C:se=\E[m:\ :sf=^J:so=\E[7m:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:\ :ve=\E[?25h:vi=\E[?25l: # hp2392|2392|2393|239x series:\ :co#80:\ :bt=\Ei:cm=\E&a%dy%dC:cv=\E&a%dY:im=\EQ:k1=\Ep\r:\ :k2=\Eq\r:k3=\Er\r:k4=\Es\r:k5=\Et\r:k6=\Eu\r:\ :k7=\Ev\r:k8=\Ew\r:kF=\EU:kN=\Eu:kP=\Ev:kR=\EV:\ :kh=\Eh:ue=\E&d@:us=\E&dD:tc=hpsub: 2392nam|hp2392nam|HP 239x series with no auto margins:\ :am@:\ :tc=hp2392: hpsub|hp terminals -- capability subset:\ :am:da:db:mi:xo:xs:\ :li#24:\ :al=\EL:bl=^G:cd=\EJ:ce=\EK:ch=\E&a%dC:cl=\EH\EJ:\ :cr=^M:dc=\EP:dl=\EM:do=\EB:ei=\ER:\ :if=/usr/lib/tabset/stdcrt:is=\E&s1A\E<\E&k0\\:kb=^H:\ :kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:ks=\E&s1A:\ :ku=\EA:le=^H:nd=\EC:se=\E&d@:sf=^J:so=\E&dB:ta=^I:\ :up=\EA: # HP 236 console # From: <ddavis@ic.berkeley.edu> hp236|hp236 internal terminal emulator:\ :am:bs:\ :co#80:li#24:\ :al=\EG:ce=\EK:cl=\EF:cm=\EE%+ %+ :dc=\EJ:dl=\EH:ei=:\ :ic=\EI:im=:se=\ECI:so=\EBI:up=^K:ve=\EDE:vs=\EDB: # This works on a hp300 console running Utah 4.3 BSD # From: Craig Leres <leres@okeeffe.berkeley.edu> hp300h|HP Catseye console:\ :am:bs:da:db:mi:xs:\ :co#128:li#51:lm#0:sg#0:\ :al=\EL:bl=^G:bt=\Ei:cd=\EJ:ce=\EK:ch=\E&a%dC:\ :cl=\E&a0y0C\EJ:cm=\E&a%dy%dC:cr=^M:ct=\E3:\ :cv=\E&a%dY:dc=\EP:dl=\EM:do=\EB:ei=\ER:\ :if=/usr/share/tabset/stdcrt:im=\EQ:kb=^H:kd=\EB:\ :ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:ks=\E&s1A:ku=\EA:\ :le=^H:me=\E&d@:nd=\EC:se=\E&d@:sf=^J:so=\E&dB:ta=^I:\ :ue=\E&d@:up=\EA:us=\E&dD: # From: Greg Couch <gregc@ernie.berkeley.edu> # (hp9837: removed obsolete ":ko=ce,cd,al,im,dl,dc:"; # mapped ":pt:" to ":it#8:" -- esr) hp9837|hp98720|hp98721|HP 9000/300 workstations:\ :am:bs:da:db:mi:pt:xs:\ :co#128:it#8:li#46:lm#0:\ :al=\EL:bl=^G:bt=\Ei:cd=\EJ:ce=\EK:ch=\E&a%dC:\ :cl=\E&a0y0C\EJ:cm=\E&a%dy%dC:ct=\E3:cv=\E&a%dY:\ :dc=\EP:dl=\EM:do=\EB:ei=\ER:im=\EQ:is=\E&v0m1b0i&j@:\ :kN=\EU:kP=\EV:kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:\ :kr=\EC:ks=\E&s1A:ku=\EA:le=^H:me=\E&d@:nd=\EC:\ :se=\E&v0S:sf=^J:so=\E&v5S:st=\E1:ue=\E&d@:up=\EA:\ :us=\E&dD: # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90 # (hp98550: removed obsolete ":kn#12:ko=al,cd,ce,ct,dc,dl,do,ei,im,nd,st,up:"; # mapped ":pt:" to ":it#8:" -- esr) hp98550|hp98550a|HP 9000 Series 300 color console:\ :am:bs:da:db:mi:pt:xs:\ :co#128:it#8:li#49:lm#0:\ :ae=^O:al=\EL:as=^N:bl=^G:bt=\Ei:cd=\EJ:ce=\EK:\ :ch=\E&a%dC:cl=\EH\EJ:cm=\E&a%dy%dC:cr=^M:ct=\E3:\ :cv=\E&a%dY:dc=\EP:dl=\EM:do=^J:ei=\ER:\ :if=/usr/share/tabset/9837:im=\EQ:k1=\Ep:k2=\Eq:\ :k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:kA=\EL:\ :kC=\EJ:kD=\EP:kE=\EK:kF=\ES:kH=\EF:kI=\EQ:kL=\EM:\ :kM=\ER:kN=\EU:kP=\EV:kR=\ET:kS=\EJ:kT=\E1:ka=\E3:\ :kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:\ :ks=\E&s1A:kt=\E2:ku=\EA:le=^H:mb=\E&dA:md=\E&dJ:\ :me=\E&d@:mh=\E&dH:mk=\E&ds:mr=\E&dJ:nd=\EC:se=\E&d@:\ :sf=^J:so=\E&dJ:st=\E1:ta=^I:ue=\E&d@:up=\EA:\ :us=\E&dD:ve=\E*dQ:vi=\E*dR: # From: Victor Duchovni <vic@fine.princeton.edu> # (hp700-wy: removed obsolete ":ko=cl,ho,ce,bt,ta,im,ei,ce,cd:nl=^J:"; # mapped ":pt:" to ":it#8:" -- esr) hp700-wy|HP700/41 emulating wyse30:\ :am:bs:bw:mi:ms:pt:\ :co#80:it#8:li#24:sg#1:ug#1:\ :al=0.7*\EE:bl=^G:bt=\EI:cd=\EY:ce=10\ET:cl=^Z:\ :cm=\E=%+ %+ :cr=^M:ct=\E0:cv=\E[%+ :dc=\EW:dl=\ER:\ :do=^V:ei=\Er:ho=^^:if=/usr/share/tabset/hp700-wy:\ :im=\Eq:is=\E~"\EC\Er\E(\EG0\003\E`9\E`1:kb=\177:\ :kd=^V:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:ll=^^^K:nd=^L:\ :rs=\E~"\EC\Er\E(\EG0\003\E`9\E`1:se=10\EG0:\ :so=10\EG4:sr=\Ej:st=\E1:ue=10\EG0:up=^K:us=10\EG8: hp70092|70092a|70092A|hp70092a|hp70092A|Hewlett-Packard 70092:\ :am:da:db:xs:\ :Nl#8:co#80:lh#2:li#24:lm#0:lw#8:\ :LF=\E&j@:LO=\E&jB:ae=^O:al=\EL:as=^N:bl=^G:bt=\Ei:\ :ce=\EK:ch=\E&a%dC:cl=\E&a0y0C\EJ:cm=\E&a%dy%dC:\ :cr=^M:ct=\E3:cv=\E&a%dY:dc=\EP:dl=\EM:do=\EB:ei=\ER:\ :im=\EQ:k1=\Ep:k2=\Eq:k3=\Er:k4=\Es:k5=\Et:k6=\Eu:\ :k7=\Ev:k8=\Ew:kA=\EL:kC=\EJ:kD=\EP:kE=\EK:kF=\ES:\ :kH=\EF:kI=\EQ:kL=\EM:kM=\ER:kN=\EU:kP=\EV:kR=\ET:\ :kS=\EJ:kT=\E1:ka=\E3:kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:\ :kl=\ED:kr=\EC:ks=\E&s1A:kt=\E2:ku=\EA:le=^H:\ :mb=\E&dA:md=\E&dB:me=\E&d@:mh=\E&dH:mr=\E&dB:nd=\EC:\ :se=\E&d@:so=\E&dJ:sr=\ET:st=\E1:ta=^I:ue=\E&d@:\ :up=\EA:us=\E&dD: bobcat|sbobcat|HP 9000 model 300 console:\ :am:da:db:mi:xs:\ :co#128:it#8:li#47:sg#0:\ :al=10*\EL:bt=\Ei:cd=\EJ:ce=\EK:ch=6\E&a%dC:\ :cl=\EH\EJ:cm=6\E&a%dy%dC:cr=^M:cv=6\E&a%dY:dc=\EP:\ :dl=10*\EM:do=\EB:ei=\ER:im=\EQ:kb=^H:kd=\EB:\ :ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:ks=\E&s1A:ku=\EA:\ :le=^H:nd=\EC:nw=^M^J:se=\E&d@:sf=^J:so=\E&dB:ta=^I:\ :ue=\E&d@:up=\EA:us=\E&dD: gator-t|HP 9000 model 237 emulating extra-tall AAA:\ :bw:km:mi:ul:\ :co#128:it#8:li#94:\ :AL=1*\E[%dL:DC=4\E[%dP:DL=1*\E[%dM:IC=4\E[%d@:\ :al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:ch=\E[%i%d`:\ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:\ :do=^J:ei=:ho=\E[H:ic=\E[@:im=:kb=^H:kd=^J:kl=^H:\ :le=^H:me=\E[m:mr=\E[7m:nd=\E[C:nw=^M^J:\ :..rp=%.\E[%db:se=\E[m:so=\E[7m:ta=^I:ue=\E[m:up=\EM:\ :us=\E[4m: gator|HP 9000 model 237 emulating AAA:\ :bw:km:mi:ul:\ :co#128:it#8:li#47:\ :AL=1*\E[%dL:DC=4\E[%dP:DL=1*\E[%dM:IC=4\E[%d@:\ :al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:ch=\E[%i%d`:\ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:\ :do=^J:ei=:ho=\E[H:ic=\E[@:im=:kb=^H:kd=^J:kl=^H:\ :le=^H:me=\E[m:mr=\E[7m:nd=\E[C:nw=^M^J:\ :..rp=%.\E[%db:se=\E[m:so=\E[7m:ta=^I:ue=\E[m:up=\EM:\ :us=\E[4m: gator-52|HP 9000 model 237 emulating VT52:\ :co#128:it#8:li#47:\ :bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:..cm=\EY%+ %+ :cr=^M:\ :do=^J:ho=\EH:kb=^H:kd=\EB:kl=\ED:kr=\EC:ku=\EA:\ :le=^H:nd=\EC:nw=^M^J:sr=\EI:ta=^I:up=\EA: gator-52t|HP 9000 model 237 emulating extra-tall VT52:\ :co#128:it#8:li#94:\ :bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:..cm=\EY%+ %+ :cr=^M:\ :do=^J:ho=\EH:kb=^H:kd=\EB:kl=\ED:kr=\EC:ku=\EA:\ :le=^H:nd=\EC:nw=^M^J:sr=\EI:ta=^I:up=\EA: #### Honeywell-Bull # # From: Michael Haardt <michael@gandalf.moria> 11 Jan 93 # # Honeywell Bull terminal. Its cursor and function keys send single # control characters and it has standout/underline glitch. Most programs # do not like these features/bugs. This is a dumb mode for this terminal. # Visual bell is realized by flashing the "keyboard locked" LED. dku7003-dumb|Honeywell Bull DKU 7003, dumb mode:\ :co#80:li#25:\ :cd=^_:ce=\E[K:cl=^]^_:cm=\E[%i%d;%dH:cr=^M:do=^K:\ :ho=^]:kb=^H:kd=^K:kh=^]:kl=^Y:kr=^X:ku=^Z:le=^Y:\ :nd=^X:nw=^M^J:sf=^J:ta=^I:up=^Z:vb=\E[2h\E[2l: # Honeywell Bull terminal. Its cursor and function keys send single # control characters and it has standout/underline glitch. Most programs # do not like these features/bugs. The following entry may cause problems # with some programs. Visual bell is realized by flashing the "keyboard # locked" LED. dku7003|Honeywell Bull DKU 7003, all features described:\ :ms:\ :co#80:li#25:sg#1:ug#1:\ :cd=^_:ce=\E[K:cl=^]^_:cm=\E[%i%d;%dH:cr=^M:do=^K:\ :ho=^]:kb=^H:kd=^K:kh=^]:kl=^Y:kr=^X:ku=^Z:le=^Y:\ :mb=\E[5m:md=\E[7m:me=\E[0m:mh=\E[2m:mr=\E[7m:nd=^X:\ :nw=^M^J:se=\E[0m:sf=^J:so=\E[7m:ta=^I:ue=\E[0m:\ :up=^Z:us=\E[4m:vb=\E[2h\E[2l: #### Lear-Siegler (adm) # # These guys are long since out of the terminals business, but # in 1995 many current terminals still have an adm type as one of their # emulations (usually their stupidest, and usually labelled adm3, though # these `adm3' emulations normally have adm3a+ capabilities). # adm1a|adm1|lsi adm1a:\ :am:\ :co#80:li#24:\ :bl=^G:cl=\E;:cm=\E=%+ %+ :cr=^M:do=^J:ho=^^:le=^H:\ :nd=^L:sf=^J:up=^K: adm2|lsi adm2:\ :am:bs:\ :co#80:li#24:\ :al=\EE:bl=^G:cd=\EY:ce=\ET:cl=\E;:cm=\E=%+ %+ :\ :cr=^M:dc=\EW:dl=\ER:do=^J:ei=:ho=^^:ic=\EQ:im=:\ :kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:sf=^J:\ :up=^K: # (adm3: removed obsolete ":ma=^K^P:" -- esr) adm3|lsi adm3:\ :am:bs:\ :co#80:li#24:\ :bl=^G:cl=^Z:cr=^M:do=^J:le=^H:sf=^J: # The following ADM-3A switch settings are assumed for normal operation: # SPACE U/L_DISP CLR_SCRN 24_LINE # CUR_CTL LC_EN AUTO_NL FDX # Other switches may be set for operator convenience or communication # requirements. I recommend # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF # ETX_OFF EOT_OFF # (adm3a: removed obsolete ":ma=^K^P:" -- esr) adm3a|lsi adm3a:\ :am:bs:\ :co#80:li#24:\ :bl=^G:cl=\032:cm=\E=%+ %+ :cr=^M:do=^J:ho=^^:le=^H:\ :nd=^L:sf=^J:up=^K: adm3a+|adm3aplus:\ :kd=^J:kl=^H:kr=^L:ku=^K:tc=adm3a: # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do+^J:" -- esr) adm5|lsi adm5:\ :sg#1:\ :bl=^G:cd=\EY:ce=\ET:cr=^M:do=^J:kb=^H:kh=^^:se=\EG:\ :so=\EG:tc=adm3a+: # From: <stephen%comp.lancs.ac.uk@ucl-cs.arpa> # (adm11: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr) adm11|lsi adm11:\ :am:bs:hs:\ :co#80:li#24:\ :bl=^G:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :cr=^M:do=^J:\ :ds=\Eh:fs=\E(\r:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:\ :nd=^L:se=\E(:so=\E):ts=\EF\E):up=^K: # From: Andrew Scott Beals <bandy@lll-crg.ARPA> # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :" -- esr) adm12|lsi adm12:\ :am:bs:mi:\ :co#80:li#24:\ :al=\EE:bl=^G:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :cr=^M:\ :dc=\EW:dl=\ER:do=^J:ei=\Er:ho=^^:im=\Eq:is=\Eq:\ :k0=^A0\r:k1=^A1\r:k2=^A2\r:k3=^A3\r:k4=^A4\r:\ :k5=^A5\r:k6=^A6\r:k7=^A7\r:k8=^A8\r:k9=^A9\r:kd=^J:\ :kl=^H:kr=^L:ku=^K:le=^H:mk=\EG1:nd=^L:se=\EG0:\ :so=\EG4:ue=\EG0:up=^K:us=\EG8: # (adm20: removed obsolete ":kn#7:"; mapped ":pt:" to ":it#8:" -- esr) adm20|lear siegler adm20:\ :am:bs:pt:\ :co#80:it#8:li#24:\ :al=\EE:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=^Z:\ :cm=\E=%i%r%+^_%+^_:cr=^M:dc=\EW:dl=\ER:ei=:ho=^^:\ :ic=\EQ:im=:k1=^A:k2=^B:k3=^W:k4=^D:k5=^E:k6=^X:\ :k7=^Z:nd=^L:se=\E(:so=\E):up=^K: adm21|lear siegler adm21:\ :sg#1:ug#1:\ :al=30*\EE:bl=^G:cd=\EY:ce=\ET:cr=^M:dc=\EW:\ :dl=30*\ER:do=^J:ei=:ic=\EQ:im=:kb=^H:kd=^J:kh=^^:\ :kl=^H:kr=^L:ku=^K:se=\EG0:sf=^J:so=\EG4:ue=\EG0:\ :us=\EG8:tc=adm3a: # (adm22: ":em=:" was an obvious typo for ":ei=:"; also, # removed obsolete ":kn#7:ko=ho:ma=j^Jk^P^K^Pl ^R^L^L :" -- esr) adm22|lsi adm22:\ :am:bs:\ :co#80:li#24:\ :al=\EE:bl=^G:bt=\EI:cd=\Ey:ce=\Et:cl=\E+:\ :cm=\200\E=%+ %+ :cr=^M:dc=\EW:dl=\ER:do=^J:ei=:\ :ho=^^:ic=\EQ:im=:\ :is=\E%\014\014\014\016\003\200\003\002\003\002\200\200\200\200\200\200\200\200\200\200\200:\ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:\ :k6=^AE\r:k7=^AF\r:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:\ :ku=^K:l1=F1:l2=F2:l3=F3:l4=F4:l5=F5:l6=F6:l7=F7:\ :nd=^L:se=\E(:so=\E):ta=\Ei:up=^K: # If the adm31 gives you trouble with standout mode, check the DIP switch in # position 6, bank @c11, 25% from back end of the circuit board. Should be # OFF. If there is no such switch, you have an old adm31 and must use oadm31. # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr) adm31|lsi adm31:\ :am:bs:mi:\ :co#80:li#24:\ :al=\EE:bl=^G:cd=\EY:ce=\ET:cl=\E*:cm=\E=%+ %+ :\ :cr=^M:dc=\EW:dl=\ER:do=^J:ei=\Er:ho=^^:im=\Eq:\ :is=\Eu\E0:k0=^A0\r:k1=^A1\r:k2=^A2\r:k3=^A3\r:\ :k4=^A4\r:k5=^A5\r:k6=^A6\r:k7=^A7\r:k8=^A8\r:\ :k9=^A9\r:kd=^J:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:\ :se=\EG0:sf=^J:so=\EG1:ue=\EG0:up=^K:us=\EG1: oadm31|o31|old adm31:\ :so=\EG4:ue@:us@:tc=adm31: # ADM36 in native mode (not VT52 emulation mode) adm36|lsi adm36:\ :am:mi:\ :co#80:li#24:\ :al=\E[1L:cd=\E[0J:ce=\E[0K:cl=\E[H\E[2J:\ :cm=\E[%i%d;%dH:dl=\E[1M:ei=\E[4l:im=\E[4h:\ :is=\E[6;?7h\E[4;20;?1;?3;?6;?4l\E(B\E)B\E>:kd=\EB:\ :kl=\ED:kr=\EC:ku=\E[A:le=^H:nd=\E[D:up=\E[A: # (adm42: removed obsolete ":ma=^K^P:" -- esr) adm42|lsi adm42:\ :am:bs:\ :co#80:li#24:\ :al=\EE:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=\E;:\ :cm=\E=%+ %+ :cr=^M:dc=\EW:dl=\ER:do=^J:ei=\Er:\ :im=\Eq:ip=:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:\ :nd=^L:pc=\177:se=\EG0:sf=^J:so=\EG4:ta=^I:up=^K:\ :vs=\EC\E3 \E3(: # The following termcap for the Lear Siegler ADM-42 leaves the # "system line" at the bottom of the screen blank (for those who # find it distracting otherwise) adm42-nl|lsi adm-42 with no system line:\ :al=\EE\EF \011:bt=\EI\EF \011:cd=\EY\EF \011:\ :ce=\ET\EF \011:cl=\E;\EF \011:cm=\E=%+ %+ \EF \011:\ :dc=\EW\EF \011:dl=\ER\EF \011:ei=\Er\EF \011:\ :im=\Eq\EF \011:tc=adm42: #### Prime # # Yes, Prime makes terminals. These entries were posted by Kevin J. Cummings # <cummings@primerd.Prime.COM> on 14 Dec 1992 and lightly edited by esr. pt100|pt200|wren|fenix|prime pt100/pt200:\ :am:bw:mi:ms:\ :co#80:it#8:li#24:\ :DC=\E[%dP:DL=\E[M:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:\ :UP=\E[%dA:al=\E[L\E[t:bt=\E[Z:cd=\E[J\E[r:\ :ce=\E[K\E[t:cl=\E?:cm=\E0%+!%+!:cr=^M:dc=\E[P:\ :do=\ED:ei=\E[4l:ho=\E$B:im=\E[4h:kb=^H:kd=\E[B:\ :ke=\E[>13l:kh=\E$A:kl=\E[D:kr=\E[C:ks=\E[>13h:\ :ku=\E[A:le=^H:nd=\E[C:nw=^M^J:se=\E[m:sf=^J:\ :so=\E[2;7m:ta=^I:\ :ti=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q:\ :ue=\E[m:up=\EM:us=\E[4m:\ :vb=\E$E\200\200\200\200\200\200\200\200\200\200\200\200\200\200\E$P: pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode:\ :co#132:\ :cm=\E[%i%d;%dH:tc=pt100: pt250|Prime PT250:\ :so@:tc=pt100: pt250w|Prime PT250 in 132-column mode:\ :so@:tc=pt100w: #### Qume (qvt) # # Qume, Inc. # 3475-A North 1st Street # San Jose CA 95134 # Vox: (800)-457-4447 # Fax: (408)-473-1510 # Net: josed@techsupp.wyse.com (Jose D'Oliveira) # # Qume was bought by Wyse, but still (as of early 1995) has its own support # group and production division. # # Discontinued Qume models: # # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+ # built to replace them, and a qvt119+ which was a 101+ with available wide # mode (132 columns). There was a qvt103 which added vt100/vt131 emulations # and an ANSI-compatible qvt203 that replaced it. Qume started producing # ANSI-compatible terminals with the qvt323 and qvt61. # # Current Qume models (as of February 1995): # # All current Qume terminals have ANSI-compatible operation modes. # Qume is still producing the qvt62, which features emulations for other # popular lines such as ADDS, and dual-host capabilities. The qvt82 is # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal # with many emulatioms including Wyse370, Wyse 325, etc. Their newest # model is the qvt520, which is vt420-compatible. # # There are some ancient printing Qume terminals under `Daisy Wheel Printers' qvt101|qvt108|qume qvt 101 and QVT 108:\ :sg#1:\ :se=\EG0:so=\EG4:tc=qvt101+: qvt101+|qvt101p|qume qvt 101 PLUS product:\ :am:bw:hs:ul:\ :co#80:li#24:sg#0:\ :al=\EE:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=^Z:\ :cm=\E=%+ %+ :cr=^M:ct=\E3:dc=\EW:dl=\ER:do=^J:\ :ds=\Eg\Ef\r:ei=:fs=^M:ho=^^:ic=\EQ:im=:k1=^A@\r:\ :k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\ :k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kA=\EE:kB=\EI:\ :kE=\ET:kI=\EQ:kL=\ER:kS=\EY:kb=^H:kd=^J:kh=^^:kl=^H:\ :kr=^L:ku=^K:le=^H:nd=^L:pf=\EA:po=\E@:se=\E(:sf=^J:\ :so=\E0P\E):st=\E1:ta=^I:ts=\Eg\Ef:ue=\EG0:up=^K:\ :us=\EG8:vb=\Eb\Ed:ve=\E.4:vs=\E.2: qvt102|qume qvt 102 product:\ :ve=\E.:tc=qvt101: qvt103|qume qvt 103:\ :am:xn:xo:\ :co#80:it#8:li#24:vt#3:\ :DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:bl=^G:\ :cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\ :cs=\E[%i%d;%dr:ct=\E[3g:do=^J:ho=\E[H:k1=\EOP:\ :k2=\EOQ:k3=\EOR:k4=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:\ :kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:\ :md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\ :r2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:\ :..sa=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m:\ :sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\ :ue=\E[m:up=\E[A:us=\E[4m: qvt103-w|qume qvt103 132 cols:\ :co#132:li#24:\ :r2=\E>\E[?3h\E[?4l\E[?5l\E[?8h:tc=qvt103: qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals:\ :am:hs:mi:ms:\ :co#80:li#24:sg#0:\ :al=\EE:bl=^G:bt=\EI:cd=\Ey:ce=\Et:cl=\E*1:\ :cm=\E=%+ %+ :cr=^M:ct=\E3:dc=\EW:dl=\ER:do=^J:\ :ds=\Eg\Ef\r:ei=\Er:fs=^M:ho=^^:im=\Eq:\ :is=\EDF\EC\EG0\Er\E(\E%EX:k0=^AI\r:k1=^A@\r:\ :k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\ :k7=^AF\r:k8=^AG\r:k9=^AH\r:kb=^H:kd=^J:kh=^^:kl=^H:\ :kr=^L:ku=^K:le=^H:nd=^L:pf=\EA:po=\E@:se=\EG0:sf=^J:\ :so=\EG4:sr=\EJ:st=\E1:ta=^I:ts=\Eg\Ef:ue=\EG0:up=^K:\ :us=\EG8:vb=\En0\En1:ve=\E.4:vs=\E.2: qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines:\ :li#25:\ :tc=qvt119+: qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode:\ :co#132:\ :is=\EDF\EC\EG0\Er\E(\E%\EX\En4:tc=qvt119+: qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25:\ :li#25:\ :tc=qvt119+: qvt203|qvt203+|qume qvt 203 Plus:\ :am:xn:xo:\ :co#80:it#8:li#24:vt#3:\ :DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:al=\E[L:\ :bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:\ :cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\ :ei=\E[4l:ho=\E[H:im=\E[4h:ip=:k0=\E[29~:k1=\E[17~:\ :k2=\E[18~:k3=\E[19~:k4=\E[20~:k5=\E[21~:k6=\E[23~:\ :k7=\E[24~:k8=\E[25~:k9=\E[28~:kb=^H:kd=\EOB:\ :ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:\ :le=^H:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\ :r2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:\ :..sa=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m:\ :sc=\E7:se=\E[m:sf=\n:so=\E[7m:sr=\EM:st=\EH:ta=^I:\ :ue=\E[m:up=\E[A:us=\E[4m: qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video):\ :co#132:li#24:\ :r2=\E>\E[?3h\E[?4l\E[?5l\E[?8h:tc=qvt203: # # Since a command is present for enabling 25 data lines, # a specific terminfo entry may be generated for the 203. # If one is desired for the QVT 119 PLUS then 25 lines must # be selected in the status line (setup line 9). # qvt203-25|QVT 203 PLUS with 25 by 80 column mode:\ :co#80:li#25:\ :is=\E[=40h\E[?3l:tc=qvt203: qvt203-25-w|QVT 203 PLUS with 25 by 132 columns:\ :co#132:li#25:\ :r2=\E[?3h\E[=40h:tc=qvt203: #### Televideo (tvi) # # TeleVideo # 550 East Brokaw Road # PO Box 49048 95161 # San Jose CA 95112 # Vox: (408)-954-8333 # Fax: (408)-954-0623 # # # There are some tvi terminals that require incredible amounts of padding and # some that don't. I'm assuming 912 and 920 are the old slow ones, # and 912b, 912c, 920b, 920c are the new ones that don't need padding. # # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer # Televideo terminals are ANSI and PC-ANSI compatible. tvi803|televideo 803:\ :cl=\E*:tc=tvi950: # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86 # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; # mapped ":pt:" to ":it#8:"; added ":ug#0:" for terminfo translation; # added khome, cub1, cud1, ind, hpa, vpa, am, msgr from SCO entry -- esr) tvi910|televideo model 910:\ :am:bs:ms:pt:\ :co#80:it#8:li#24:sg#1:ug#0:\ :bl=^G:bt=\EI:cd=\EY:ce=\ET:ch=\E]%+ :cl=^Z:\ :cm=\E=%+ %+ :cr=^M:cv=\E[%+ :do=^J:ho=\E=\001\001:\ :if=/usr/share/tabset/stdcrt:k0=^AI\r:k1=^A@\r:\ :k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\ :k7=^AF\r:k8=^AG\r:k9=^AH\r:kb=^H:kd=^J:kh=^^:kl=^H:\ :kr=^L:ku=^K:le=^H:nd=^L:se=\EG0:sf=^J:so=\EG4:\ :ue=\EG0:up=^K:us=\EG8: # From: Alan R. Rogers <rogers%albany@csnet-relay> # as subsequently hacked over by someone at SCO # (tvi910+: removed obsolete ":ma=^K^P^L :"; mapped ":pt:" to ":it#8:"; # added ":ug#0:" for terminfo translation -- esr) tvi910+|910+|televideo 910+:\ :am:bs:ms:pt:\ :co#80:it#8:li#24:sg#1:ug#0:\ :al=\EE:bl=^G:bt=\EI:cd=\EY:ce=\ET:ch=\E]%+ :cl=^Z:\ :cm=\E=%+ %+ :cr=^M:cv=\E[%+ :dc=\EW:dl=\ER:do=^J:\ :ei=:ho=^^:ic=\EQ:if=/usr/share/tabset/stdcrt:im=:\ :k0=^A@\r:k1=^AA\r:k2=^AB\r:k3=^AC\r:k4=^AD\r:\ :k5=^AE\r:k6=^AF\r:k7=^AG\r:k8=^AH\r:k9=^AI\r:kb=^H:\ :kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^M:ll=\E=7 :nd=^L:\ :se=\EG0:sf=^J:so=\EG4:ue=\EG0:up=^K:us=\EG8: # (tvi912: removed obsolete ":ma=^K^P^L :"; # mapped ":pt:" to default tabs -- esr) tvi912|tvi920|old televideo 912:\ :am:bs:pt:\ :co#80:li#24:sg#1:ug#1:\ :al=\EE:bl=^G:cd=\Ey:ce=\ET:cl=^Z:cm=\E=%+ %+ :cr=^M:\ :ct=\E3:dc=\EW:dl=\ER:do=^J:ei=:ho=^^:ic=\EQ:\ :if=/usr/share/tabset/stdcrt:im=:k0=^AI\r:k1=^A@\r:\ :k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\ :k7=^AF\r:k8=^AG\r:k9=^AH\r:kb=^H:kd=^J:kl=^H:kr=^L:\ :ku=^K:le=^H:nd=^L:se=\Ek:sf=^J:so=\Ej:st=\E1:ta=^I:\ :ue=\Em:up=^K:us=\El: # the 912 has a <funct> key that's like shift: <funct>8 xmits "^A8\r". # The 920 has this plus real function keys that xmit different things. # Terminfo makes you use the funct key on the 912 but the real keys on the 920. tvi912c|tvi912b|912c|912b|tvi|new televideo 912:\ :al=\EE:dl=\ER:tc=tvi912: # set to page 1 when entering ex (\E-17 ) # reset to page 0 when exiting ex (\E-07 ) tvi912-2p|tvi920-2p|912-2p|920-2p|tvi-2p|televideo w/2 pages:\ :te=\E-07 :ti=\E-17 :tc=tvi912: # We got some new tvi912c terminals that act really weird on the regular # termcap, so one of our gurus worked this up. Seems that cursor # addressing is broken. tvi912cc|tvi912 at cowell college:\ :cm@:tc=tvi912c: tvi920b|tvi920c|new televideo 920:\ :al=\EE:dl=\ER:k0=^AI\r:k1=^A@\r:k2=^AA\r:k3=^AB\r:\ :k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:\ :k9=^AH\r:tc=tvi912: tvi924|televideo tvi924:\ :am:bw:hs:in:mi:ms:xn:xo:\ :co#80:it#8:li#24:sg#0:ws#80:\ :F1=^AK\r:F2=^AL\r:F3=^AM\r:F4=^AN\r:F5=^AO\r:al=\EE:\ :bl=^G:bt=\EI:cd=\Ey:ce=\Et:cl=\E*0:cm=\E=%+ %+ :\ :cr=^M:cs=\E_%+ %+ :ct=\E3:dc=\EW:dl=\ER:do=^V:\ :ds=\Es0:ei=:fs=^Y:ho=^^:\ :i1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0:ic=\EQ:\ :if=/usr/lib/tabset/stdcrt:im=:k0=^A@\r:k1=^AA\r:\ :k2=^AB\r:k3=^AC\r:k4=^AD\r:k5=^AE\r:k6=^AF\r:\ :k7=^AG\r:k8=^AH\r:k9=^AI\r:k;=^AJ\r:kA=\EE:kC=\E*0:\ :kD=\EW:kE=\Et:kI=\EQ:kL=\ER:kS=\Ey:kb=^H:kd=^V:\ :kh=^^:kl=^H:kr=^L:ku=^K:l0=F1:l1=F2:l2=F3:l3=F4:\ :l4=F5:l5=F6:l6=F7:l7=F8:l8=F9:l9=F10:la=F11:le=^H:\ :mb=\EG2:me=\EG0:mk=\EG1:nd=^L:pk=\E|%+1%s\031:\ :se=\EG0:sf=^J:so=\EG4:sr=\Ej:st=\E1:ta=^I:ts=\Ef:\ :ue=\EG0:up=^K:us=\EG8:vb=\Eb\Ed:ve=\E.3:vi=\E.0:\ :vs=\E.1: tvi924vb|924vb|televideo model 924 visual bells:\ :vb=\Eb\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\Ed:tc=tvi924: tvi925|925|televideo 925:\ :am:bw:hs:ul:\ :co#80:li#24:sg#1:ug#1:\ :al=\EE:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=^Z:\ :cm=\E=%+ %+ :cr=^M:ct=\E3:dc=\EW:dl=\ER:do=^V:\ :ds=\Eh:ei=:fs=^M\Eg:ho=^^:ic=\EQ:im=:k0=^AI\r:\ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:\ :k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:kA=\EE:kC=^Z:\ :kD=\EW:kE=\ET:kI=\EQ:kL=\ER:kS=\EY:kb=^H:kd=^V:\ :kh=^^:kl=^H:kr=^L:ku=^K:le=^H:se=\EG0:sf=^J:so=\EG4:\ :st=\E1:ta=^I:ts=\Eh\Ef:ue=\EG0:up=^K:us=\EG8:\ :vb=\Eb\Ed:ve=\E.4:vs=\E.2: tvi925vb|925vb|televideo model 925 visual bells:\ :vb=\Eb\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\Ed:tc=tvi925: # Since the 925 uses a character position to store the escape sequences to go # in and out of both stand out and underline modes, screen positioning is # difficult. The following 925 entries don't use these modes. tvi925n|925n|televideo model 925 no standout or underline:\ :se@:so@:ue@:us@:tc=tvi925: tvi925vbn|925vbn|televideo model 925 visual bells no so or ul:\ :vb=\Eb\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\Ed:tc=tvi925n: # From: Tim Curry, Univ. of Central Fla. <duke!ucf-cs!tim> 5/21/82 # (tvi925a: removed obsolete ":kn#12:"; mapped ":pt:" to ":it#8:" --esr) tvi925a|925a|TeleVideo Model 925:\ :am:bs:bw:pt:\ :co#80:it#8:li#24:sg#1:ug#1:\ :al=\EE:bt=\EI:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :\ :dc=\EW:dl=\ER:do=^V:ei=:ic=\EQ:\ :if=/usr/share/tabset/std:im=:is=\El:kb=^H:kd=^V:\ :kh=^^:kl=^H:kr=^L:ku=^K:nd=^L:se=\EG0:so=\EG4:\ :ue=\EG0:up=^K:us=\EG8:\ :vb=\Eb\200\200\200\200\200\200\200\200\200\200\200\200\200\200\Ed:\ :ve=\E.4:vs=\E.2: # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993 # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82 # for additional capabilities, # The following tvi descriptions from B:pjphar and virus!mike # is for all 950s. It sets the following attributes: # full duplex (\EDF) write protect off (\E() # conversation mode (\EC) graphics mode off (\E%) # white on black (\Ed) auto page flip off (\Ew) # turn off status line (\Eg) clear status line (\Ef\r) # normal video (\E0) monitor mode off (\EX or \Eu) # edit mode (\Er) load blank char to space (\Ee\040) # line edit mode (\EO) enable buffer control (^O) # protect mode off (\E\047) duplex edit keys (\El) # program unshifted send key to send line all (\E016) # program shifted send key to send line unprotected (\E004) # set the following to nulls: # field delimiter (\Ex0\200\200) # line delimiter (\Ex1\200\200) # start-protected field delimiter (\Ex2\200\200) # end-protected field delimiter (\Ex3\200\200) # set end of text delimiter to carriage return/null (\Ex4\r\200) # (tvi950: early versions had ":ko=ic,dc,al,dl,cl,bt,ce,cd:" # and ":ma=^Vj^Kk^Hh^Ll^^H:". I mapped ":pt:" to ":it#8:"; # tvi950|950|televideo950:\ :am:bs:hs:mi:ms:pt:xn:xo:\ :co#80:li#24:sg#1:ug#1:\ :ac=d\rc\014e\nb\011i\013:ae=^X:al=\EE:as=^U:bl=^G:\ :bt=\EI:cd=\Ey:ce=\Et:cl=\E*:cm=\E=%+ %+ :cr=^M:\ :ct=\E3:dc=\EW:dl=\ER:do=^J:ds=\Eg\Ef\r:ei=\Er:fs=^M:\ :ho=^^:im=\Eq:\ :is=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\011\Ex3\200\200\Ex4\r\200\Ef\r:\ :k0=^A0\r:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:\ :k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:kA=\EE:\ :kB=\EI:kC=\E*:kD=\EW:kE=\Et:kL=\ER:kS=\Ey:kb=^H:\ :kd=^V:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:pf=\Ea:\ :po=\E`:se=\EG0:sf=^J:so=\EG4:sr=\Ej:st=\E1:ta=^I:\ :ts=\Eg\Ef:ue=\EG0:up=^K:us=\EG8:\ :vb=\Eb\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\Ed: # # is for 950 with two pages adds the following: # set 48 line page (\E\\2) # place cursor at page 0, line 24, column 1 (\E-07 ) # set local (no send) edit keys (\Ek) # # two page 950 adds the following: # when entering ex, set 24 line page (\E\\1) # when exiting ex, reset 48 line page (\E\\2) # place cursor at 0,24,1 (\E-07 ) # set duplex (send) edit keys (\El) when entering vi # set local (no send) edit keys (\Ek) when exiting vi # tvi950-2p|950-2p|televideo950 w/2 pages:\ :is=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\011\Ex3\200\200\Ex4\r\200\E\\2\E-07 \011:\ :ke=\Ek:ks=\El:te=\E\\2\E-07 :ti=\E\\1\E-07 :tc=tvi950: # # is for 950 with four pages adds the following: # set 96 line page (\E\\3) # place cursor at page 0, line 24, column 1 (\E-07 ) # # four page 950 adds the following: # when entering ex, set 24 line page (\E\\1) # when exiting ex, reset 96 line page (\E\\3) # place cursor at 0,24,1 (\E-07 ) # tvi950-4p|950-4p|televideo950 w/4 pages:\ :is=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\011\Ex3\200\200\Ex4\r\200\E\\3\E-07 \011:\ :ke=\Ek:ks=\El:te=\E\\3\E-07 :ti=\E\\1\E-07 :tc=tvi950: # # is for reverse video 950 changes the following: # set reverse video (\Ed) # # set vb accordingly (\Ed ...nulls... \Eb) # tvi950-rv|950-rv|televideo950 rev video:\ :is=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\011\Ex3\200\200\Ex4\r\200:\ :vb=\Ed\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\Eb:tc=tvi950: # # uses the appropriate entries from 950-2p and 950-rv # tvi950-rv-2p|950-rv-2p|televideo950 rev video w/2 pages:\ :is=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\011\Ex3\200\200\Ex4\r\200\E\\2\E-07 :\ :ke=\Ek:ks=\El:te=\E\\2\E-07 :ti=\E\\1\E-07 :\ :vb=\Ed\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\Eb:tc=tvi950: # # uses the appropriate entries from 950-4p and 950-rv # tvi950-rv-4p|950-rv-4p|televideo950 rev video w/4 pages:\ :is=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\011\Ex3\200\200\Ex4\r\200\E\\3\E-07 :\ :ke=\Ek:ks=\El:te=\E\\3\E-07 :ti=\E\\1\E-07 :\ :vb=\Ed\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\Eb:tc=tvi950: # From: Andreas Stolcke <stolcke@icsi.berkeley.edu> # (tvi955: removed obsolete ":ko=ic,dc,al,dl,cl,bt,ce,cd:ma:=^Vj^Kk^Hh^Ll^^H"; # mapped ":pt:" to ":it#8:"; removed incorrect (and overridden) ":do=^J:"; # fixed broken continuations in the :rs: string -- esr) tvi955|televideo955:\ :5i:am:bs:hs:mi:pt:xn:xo:\ :co#80:it#8:li#24:\ :RA=\E[=7l:RX=^N:SA=\E[=7h:SX=^O:\ :ac=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ:ae=\E%:al=\EE:\ :as=\E$:bt=\EI:cd=\Ey:ce=\Et:cl=\E*:cm=\E=%+ %+ :\ :ct=\E3:dc=\EW:dl=\ER:do=^V:ds=\Eg\Ef\r:ei=\Er:fs=^M:\ :ho=^^:im=\Eq:is=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El:\ :k0=^A0\r:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:\ :k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:kA=\EE:\ :kB=\EI:kC=\EY:kD=\EW:kE=\ET:kI=\EQ:kL=\ER:kM=\EQ:\ :kN=\EK:kP=\EJ:kT=\E1:ka=\E3:kb=^H:kd=^V:kh=^^:kl=^H:\ :kr=^L:kt=\E2:ku=^K:le=^H:mb=\EG2:me=\EG0\E[=5l:\ :mh=\E[=5h:mk=\EG1:mr=\EG4:nd=^L:pf=\Ea:po=\E`:\ :ps=\EP:\ :rs=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\200\E0p\E4\200\Ef\r:\ :se=\EG0:so=\EG4:sr=\Ej:st=\E1:ts=\Eg\Ef:ue=\EG0:\ :up=^K:us=\EG8:\ :vb=\Eb\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\Ed:\ :ve=\E.2:vi=\E.0:vs=\E.1: tvi955-w|955-w|televideo955 w/132 cols:\ :co#132:\ :cm=\E[%i%d;%dH:is=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El:tc=tvi955: # use half-intensity as normal mode, full intensity as bold (md) tvi955-hb|955-hb|televideo955 half-bright:\ :is=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El:md=\E[=5l:\ :me=\EG0\E[=5h:mh@:tc=tvi955: # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin # (tvi970: removed ":sg#0:"; mapped ":pt:" to ":it#8:" -- esr) tvi970|televideo970:\ :bs:da:db:mi:ms:pt:\ :co#80:it#8:li#24:\ :ae=\E(B:al=\E[L:as=\E(B:bt=\E[Z:cd=\E[0J:ce=\E[0K:\ :cl=\E[H\E[2J:cm=\E[%i%d;%df:dc=\E[P:dl=\E[M:do=\ED:\ :ei=\E[4l:im=\E[4h:\ :is=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J:\ :k1=\E?a:k2=\E?b:k3=\E?c:k4=\E?d:k5=\E?e:k6=\E?f:\ :k7=\E?g:k8=\E?h:k9=\E?i:kb=^H:kd=\E[B:kh=\E[H:\ :kl=\E[D:kr=\E[C:ku=\E[A:nd=\E[C:se=\E[0m:so=\E[7m:\ :sr=\EM:ue=\E[0m:up=\EM:us=\E[4m:\ :vb=\E[5;m\200\200\200\200\200\200\200\200\200\E[0;m:\ :vs=\E[1Q: # From Gene Rochlin <armsis@amber> 9/19/84. # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars # per line (rather than 40), Esc K chooses the normal character set. Not sure # padding is needed, but adapted from the tvi920c termcap. The :so: and :us: # strings are klutzy, but at least use no screen space. # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:" -- esr) tvipt|televideopt:\ :am:bs:\ :co#80:li#24:\ :al=\EE<5*>:bt=\EI:ce=\ET:cl=^Z:cm=\E=%+ %+ :\ :dl=\ER<5*>:ho=^^:if=/usr/share/tabset/stdcrt:\ :is=\Ev\Eu\EK:kb=^H:kd=^J:kl=^H:kr=^L:ku=^K:nd=^L:\ :se=\EF:so=\EG1@A\EH:ue=\EF:up=^K:us=\EG1B@\EH: #### Visual (vi) # # (vi50: mapped ":pt:" to default 8-char tabs -- esr) vi50|visual 50:\ :am:bs:ms:pt:\ :co#80:li#24:\ :al=\EL:bl=^G:cd=\Ek:ce=\EK:cl=^Z:cm=\E=%+ %+ :cr=^M:\ :dl=\EM:do=^J:ho=\EH:kb=^H:kd=\EB:kh=\EH:kl=\ED:\ :kr=\EC:ku=\EA:le=^H:nd=^L:se=\ET:sf=^J:so=\EU:ta=^I:\ :up=^K: # From: Jeff Siegal <jbs@athena.mit.edu> # (vi55: mapped ":pt:" to ":it#8:" -- esr) vi55|Visual 55:\ :am:bs:mi:ms:pt:\ :co#80:it#8:li#24:\ :al=\EL:cd=\EJ:ce=\EK:cl=\Ev:cm=\EY%+ %+ :\ :cs=\E_%+A%+A:dc=\Ew:dl=\EM:do=^J:ei=\Eb:ho=\EH:\ :im=\Ea:is=\Ev\E_AX\Eb\EW\E9P\ET:kb=^H:kd=\EB:kl=\ED:\ :kr=\EC:ku=\EA:le=^H:nd=\EC:se=\ET:so=\EU:sr=\EI:\ :up=\EA: # The Visual 200 beeps when you type a character in insert mode. # This is a horribly obnoxious misfeature, and some of the entries # below try to get around the problem by ignoring the feature or # turning it off when inputting a character. They are said not to # work well at 300 baud. (You could always cut the wire to the bell!) # From: <mike@brl-vgr> Mon Nov 14 08:34:29 1983 # (vi200: mapped ":pt:" to default 8-char tabbing -- esr) vi200|vis200|visual 200 with function keys:\ :am:bs:pt:\ :co#80:li#24:\ :al=\EL:bl=^G:cd=\Ey:ce=\Ex:cl=\Ev:cm=\EY%+ %+ :\ :cr=^M:dc=\EO:dl=\EM:do=^J:ei=:ho=\EH:ic=\Ei \010\Ej:\ :im=:is=\E3\Eb\Ej\E\\\El\EG\Ec\Ek:k0=\EP:k1=\EQ:\ :k2=\ER:k3=\E :k4=\E!:k5=\E":k6=\E#:k7=\E$:k8=\E%:\ :k9=\E&:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:le=^H:\ :nd=\EC:se=\E3:sf=^J:so=\E4:sr=\EI:ta=^I:up=\EA:\ :ve=\Ec:vs=\Ed: vi200-rv-ic|visual 200 reverse video using insert char:\ :ei=\Ej:ic@:im=\Ei:tc=vi200-rv: # The older Visuals didn't come with function keys. This entry uses # ks and ke so that the keypad keys can be used as function keys. # If your version of vi doesn't support function keys you may want # to use vi200-f. # (vi200: mapped ":pt:" to ":it#8:" -- esr) vi200-f|visual|visual 200 no function keys:\ :am:bs:pt:\ :co#80:it#8:li#24:\ :al=\EL:bl=^G:cd=\Ey:ce=\Ex:cl=\Ev:cm=\EY%+ %+ :\ :cr=^M:dc=\EO:dl=\EM:do=^J:ei=:ho=\EH:ic=\Ei \010\Ej:\ :im=:is=\E3\Eb\Ej\E\\\El\EG\Ed\Ek:k0=\E?p:k1=\E?q:\ :k2=\E?r:k3=\E?s:k4=\E?t:k5=\E?u:k6=\E?v:k7=\E?w:\ :k8=\E?x:k9=\E?y:kd=\EB:ke=\E>:kh=\EH:kl=\ED:kr=\EC:\ :ks=\E=:ku=\EA:le=^H:nd=\EC:sf=^J:sr=\EI:ta=^I:\ :up=\EA:ve=\Ec:vs=\Ed: vi200-rv|visual 200 reverse video:\ :se=\E3:so=\E4:sr@:ve@:vs@:tc=vi200: vi200-ic|visual 200 using insert char:\ :ei=\Ej:ic@:im=\Ei:tc=vi200: # the function keys are programmable but we don't reprogram # them to their default values with "is" because programming # them is very verbose. maybe an "if" file should be made for # the 300 and they could be stuck in it. vi300|visual 300 ansi x3.64:\ :am:bw:mi:xn:\ :co#80:li#24:\ :al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:\ :cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=\E[B:\ :ei=\E[4l:ho=\E[H:im=\E[4h:\ :is=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s:\ :k1=\E_A\E\\:k2=\E_B\E\\:k3=\E_C\E\\:k4=\E_D\E\\:\ :k5=\E_E\E\\:k6=\E_F\E\\:k7=\E_G\E\\:k8=\E_H\E\\:\ :k9=\E_I\E\\:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\ :le=^H:nd=\E[C:se=\E[m:sf=^J:so=\E[1m:sr=\EM:ta=^I:\ :ue=\E[m:up=\E[A:us=\E[4m: vi300-rv|visual 300 reverse video:\ :bl=^G:cr=^M:do=^J:\ :is=\E[7s\E[2;3;4;20;?6l\E[12;?5;?7h\E[1Q\E[0;1(D\E[8s:\ :sf=^J:tc=vi300: # slow scroll doesn't work that well; if you type on the # keyboard while the terminal is scrolling it drops characters vi300-ss|visual 300 slow scroll:\ :bl=^G:cr=^M:do=^J:sf=^J:ve=\E[?4h:vs=\E[?4l:tc=vi300: # some of the vi300s have older firmware that has the command # sequence for setting editing extent reversed. ovi300|visual 300 old:\ :bl=^G:cr=^M:do=^J:\ :is=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s:\ :sf=^J:tc=vi300: # if your version of ex/vi doesn't correctly implement xn # use this termcap for the vi300 vi300-aw|visual 300 no autowrap:\ :am@:xn@:\ :ve=\E[?7h:vs=\E[?7l:tc=vi300: # the visual 550 is a visual 300 with tektronix graphics, # and with 33 lines. clear screen is modified here to # also clear the graphics. vi550|visual 550 ansi x3.64:\ :li#33:\ :bl=^G:cl=\030\E[H\E[2J:cr=^M:do=^J:sf=^J:tc=vi300: # (vi603: this had ":sb=\EM:"; sb is undefined, prob. an error for sr -- esr) vi603|visual603|visual 603:\ :hs:mi:\ :al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\ :cm=\E[%i%d;%dH:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:\ :ds=\EP2;1~\E\\:ei=\E[4l:fs=\E\\:im=\E[4h:\ :is=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r\E[24;1H:\ :mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\ :rs=\E>\E[?3l\E[?4l\E[?7h\E[?8h:se=\E[27m:sf=\ED:\ :so=\E[7m:sr=\EM:ts=\EP2~:ue=\E[24m:up=\E[A:us=\E[4m:tc=vt100: #### Wyse (wy) # # Wyse Technology # 3471 North First Street # San Jose, CA 95134 # Vox: (408)-473-1200 # Fax: (408) 473-1222 # # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at # (800)-800-WYSE (option 5 gets you a human). # # All the following entries until (but not including) wy100q are direct from # Wyse technical support and represent their best knowledge as of January 1995. # I made two trivial syntax fixes in the wyse30 entry, added OTbs everywhere # needed, and merged in OTug#1 entries (as indicated by the termcap version of # their descriptions). # # Note: The wyse75, wyse85, and wyse99 have been discontinued. # Although the Wyse 30 can support more than one attribute # it requires magic cookies to do so. Many applications do not # function well with magic cookies. The following terminfo uses # the protect mode to support one attribute (dim) without cookies. # If more than one attribute is needed then the wy30-mc terminfo # should be used. # wy30|wyse30|Wyse 30:\ :5i:am:bs:bw:hs:mi:ms:xo:\ :Nl#8:co#80:lh#1:li#24:lw#8:ma#1:ug#1:ws#45:\ :#2=\E{:&3=\Er:@8=\E7:LF=\EA11:LO=\EA10:\ :ac=0wa_h[jukslrmqnxqzttuyv]wpxv:ae=\EH^C:al=\EE:\ :as=\EH^B:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=\E+:\ :cm=\E=%+ %+ :cr=^M:ct=\E0:dc=\EW:dl=\ER:do=^J:\ :ds=\EF\r:ei=\Er:fs=^M:ho=^^:im=\Eq:ip=:\ :is=\E'\E(\E^3\E`9\016\024:k1=^A@\r:k2=^AA\r:\ :k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:\ :k8=^AG\r:kA=\EE:kB=\EI:kD=\EW:kE=\ET:kI=\EQ:kL=\ER:\ :kN=\EK:kP=\EJ:kS=\EY:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:\ :ku=^K:le=^H:ll=^^^K:me=\E(\EH\003:mh=\E`7\E):\ :mp=\E`7\E):nd=^L:nw=^M^J:pf=^T:pn=\Ez%+/%s\r:po=^X:\ :ps=\EP:px=\Ez%+?%s\177:\ :..sa=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;:\ :se=\E(:sf=\n:so=\E`7\E):sr=\Ej:st=\E1:ta=\011:\ :ts=\EF:up=^K:ve=\E`1:vi=\E`0: # # This terminal description uses the non-hidden attribute mode # (with magic cookie). # wy30-mc|wyse30-mc|wyse 30 with magic cookies:\ :ms@:\ :ma@:sg#1:ug#1:\ :ae=\EG0\EH\003:as=\EG0\EH\002:mb=\EG2:\ :me=\EG0\E(\EH\003:mh=\EGp:mk=\EG1:mp=\EG0\E):\ :mr=\EG4:\ :..sa=\EG%'0'%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;:\ :se=\EG0:so=\EG4:te=\EG0:ue=\EG0:us=\EG8:tc=wy30: # The manditorary pause used by flash does not work with # older versions of terminfo. If you see this effect then # unset xon and delete the / from the delay. # i.e. change $<100/> to $<100> wy30-vb|wyse30-vb|wyse 30 visible bell:\ :vb=\E`8\E`9:tc=wy30: # # The Wyse 50 can support one attribute (e.g. Dim, Inverse, # Normal) without magic cookies by using the protect mode. # The following description uses this feature, but when more # than one attribute is put on the screen at once, all attributes # will be changed to be the same as the last attribute given. # The Wyse 50 can support more attributes when used with magic # cookies. The wy50-mc terminal description uses magic cookies # to correctly handle multiple attributes on a screen. # wy50|wyse50|Wyse 50:\ :5i:am:bs:bw:hs:mi:ms:xo:\ :Nl#8:co#80:lh#1:li#24:lw#8:ma#1:ws#45:\ :#2=\E{:%9=\EP:&3=\Er:@8=\E7:F1=^AJ\r:F2=^AK\r:\ :F3=^AL\r:F4=^AM\r:F5=^AN\r:F6=^AO\r:LF=\EA11:\ :LO=\EA10:ac=0wa_h[jukslrmqnxqzttuyv]wpxv:ae=\EH^C:\ :al=\EE:as=\EH^B:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=\E+:\ :cm=\E=%+ %+ :cr=^M:ct=\E0:dc=\EW:dl=\ER:do=^J:\ :ds=\EF\r:ei=\Er:fs=^M:ho=^^:i1=\E`\072\E`9:im=\Eq:\ :ip=:is=\016\024\E'\E(:k1=^A@\r:k2=^AA\r:k3=^AB\r:\ :k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:\ :k9=^AH\r:k;=^AI\r:kA=\EE:kB=\EI:kD=\EW:kE=\ET:\ :kI=\EQ:kL=\ER:kN=\EK:kP=\EJ:kS=\EY:kb=^H:kd=^J:\ :kh=^^:kl=^H:kr=^L:ku=^K:le=^H:ll=^^^K:me=\E(\EH\003:\ :mh=\E`7\E):mp=\E`7\E):mr=\E`6\E):nd=^L:nw=^M^J:\ :pf=^T:pn=\Ez%+/%s\r:po=^X:ps=\EP:px=\Ez%+?%s\177:\ :..sa=%?%p1%p3%|%t\E`6\E)\n%e%p5%p8%|%t\E`7\E)%e\E(%;\n%?%p9%t\EH\002%e\EH\003%;:\ :se=\E(:sf=\n:so=\E`6\E):sr=\Ej:st=\E1:ta=^I:ts=\EF:\ :up=^K:ve=\E`1:vi=\E`0: # # This terminal description uses the non-hidden attribute mode # (with magic cookie). # wy50-mc|wyse50-mc|wyse 50 with magic cookies:\ :ms@:\ :ma@:sg#1:ug#1:\ :ae=\EG0\EH\003:as=\EG0\EH\002:mb=\EG2:\ :me=\EG0\E(\EH\003:mh=\EGp:mk=\EG1:mp=\EG0\E):\ :mr=\EG4:\ :..sa=\EG%'0'%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;:\ :se=\EG0:so=\EGt:te=\EG0:ue=\EG0:us=\EG8:tc=wy50: # The mandatory pause used by flash does not work with # older versions of terminfo. If you see this effect then # unset xon and delete the / from the delay. # i.e. change $<100/> to $<100> wy50-vb|wyse50-vb|wyse 50 visible bell:\ :vb=\E`8\E`9:tc=wy50: wy50-w|wyse50-w|wyse 50 132-column:\ :Nl#16:co#132:lw#7:ws#97:\ :cm=\Ea%i%dR%dC:dc=\EW:i1=\E`;\E`9:tc=wy50: wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell:\ :vb=\E`8\E`9:tc=wy50-w: # # The Wyse 350 is a Wyse 50 with color. # Unfortunately this means that it has magic cookies. # The color attributes are designed to overlap the reverse, dim and # underline attributes. This is nice for monochrome applications # because you can make underline stuff green (or any other color) # but for true color applications it's not so hot because you cannot # mix color with reverse, dim or underline. # To further complicate things one of the attributes must be # black (either the foreground or the background). In reverse video # the background changes color with black letters. In normal video # the foreground changes colors on a black background. # This terminfo uses some of the more advanced features of curses # to display both color and blink. In the final analysis I am not # sure that the wy350 runs better with this terminfo than it does # with the wy50 terminfo (with user adjusted colors). # wy350|wyse350|Wyse 350:\ :5i:am:bs:bw:hs:mi:xo:\ :Co#8:NC#55:Nl#8:co#80:lh#1:li#24:lw#8:pa#8:sg#1:\ :ug#1:ws#45:\ :#2=\E{:%9=\EP:&3=\Er:@8=\E7:F1=^AJ\r:F2=^AK\r:\ :F3=^AL\r:F4=^AM\r:F5=^AN\r:F6=^AO\r:LF=\EA11:\ :LO=\EA10:Sb= :\ :..Sf=%?%p1%{0}%=%t%{76}\n%e%p1%{1}%=%t%{64}\n%e%p1%{2}%=%t%{8}\n%e%p1%{3}%=%t%{72}\n%e%p1%{4}%=%t%{4}\n%e%p1%{5}%=%t%{68}\n%e%p1%{6}%=%t%{12}\n%e%p1%{7}%=%t%{0}\n%;%PC\n\EG%gC%gA%+%'0'%+%c:\ :ac=0wa_h[jukslrmqnxqzttuyv]wpxv:ae=\EG0\EH\003:\ :al=\EE:as=\EG0\EH\002:bl=^G:bt=\EI:cd=\EY:ce=\ET:\ :cl=\E+:cm=\E=%+ %+ :cr=^M:ct=\E0:dc=\EW:dl=\ER:\ :do=^J:ds=\EF\r:ei=\Er:fs=^M:ho=^^:i1=\E`\072\E`9:\ :i2=\E%?:im=\Eq:ip=:is=\016\024\E'\E(:k1=^A@\r:\ :k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\ :k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kA=\EE:kB=\EI:\ :kD=\EW:kE=\ET:kI=\EQ:kL=\ER:kN=\EK:kP=\EJ:kS=\EY:\ :kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:ll=^^^K:\ :mb=\EG2:me=\EG0\E(\EH\003%{0}%PA%{0}%PC:mh=\EGp:\ :mk=\EG1:mp=\EG0\E):mr=\EG4:nd=^L:nw=^M^J:oc=\E%?:\ :op=\EG0:pf=^T:pn=\Ez%+/%s\r:po=^X:ps=\EP:\ :px=\Ez%+?%s\177:\ :..sa=%{0}%?%p4%t%{2}%|%;\n%?%p7%t%{1}%|%;%PA\n\EG%?%gC%t%gC%e\n%{0}%?%p1%t%{4}%|%;\n%?%p2%t%{8}%|%;\n%?%p3%t%{4}%|%;\n%?%p5%t%{64}%|%;\n%;%gA%+%'0'%+%c\n%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;:\ :se=\EG0:sf=\n:so=\EG4:sr=\Ej:st=\E1:ta=^I:ts=\EF:\ :ue=\EG0:up=^K:us=\EG8:ve=\E`1:vi=\E`0: # The manditorary pause used by flash does not work with # older versions of terminfo. If you see this effect then # unset xon and delete the / from the delay. # i.e. change $<100/> to $<100> wy350-vb|wyse350-vb|wyse 350 visible bell:\ :vb=\E`8\E`9:tc=wy350: wy350-w|wyse350-w|wyse 350 132-column:\ :Nl#16:co#132:lw#7:ws#97:\ :cm=\Ea%i%dR%dC:dc=\EW:i1=\E`;\E`9:tc=wy350: wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell:\ :vb=\E`8\E`9:tc=wy350-w: # # This terminfo description is untested. # wy100|wyse 100:\ :hs:mi:\ :co#80:li#24:sg#1:ug#1:\ :al=\EE:bl=^G:cd=\EY:ce=\ET:cl=\E;:cm=\E=%+ %+ :\ :cr=^M:dc=\EW:dl=\ER:do=^J:ds=\EA31:ei=\Er:fs=^M:\ :im=\Eq:is=\Eu\E0:k1=^A@\r:k2=^AA\r:k3=^AB\r:\ :k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:kb=^H:\ :kd=^J:kh=\E{:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:se=\EG0:\ :sf=^J:so=\EG4:ts=\EF:ue=\EG0:up=^K:us=\EG8: # # The Wyse 120/150 has most of the features of the Wyse 60. # # This terminal does not need padding up to 9600 baud! # # (msgr) should be set but the clear screen fails when in # alt-charset mode. Try \EcE \E+ if the screen is really clear # then set msgr. # wy120|wyse120|wy150|wyse150|Wyse 120/150:\ :5i:am:bs:bw:hs:km:mi:ms:xo:\ :Nl#8:co#80:it#8:lh#1:li#24:lw#8:pb#9601:ws#45:\ :#2=\E{:%9=\EP:&3=\Er:@8=\E7:F1=^AJ\r:F2=^AK\r:\ :F3=^AL\r:F4=^AM\r:F5=^AN\r:F6=^AO\r:LF=\EA11:\ :LO=\EA10:RA=\Ed.:RX=\Ec20:SA=\Ed/:SX=\Ec21\ntbc=\E0:\ :ac=+/\\\054.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~:\ :ae=\EcD:al=\EE:as=\EcE:bl=^G:bt=\EI:cd=\EY:ce=\ET:\ :cl=\E+:cm=\E=%+ %+ :cr=^M:dc=\EW:dl=\ER:do=^J:\ :ds=\EF\r:ei=\Er:fs=^M:ho=^^:i1=\EcB0\EcC1:\ :i2=\EwJ\Ew1:im=\Eq:ip=:\ :is=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El:\ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:\ :k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kA=\EE:\ :kB=\EI:kD=\EW:kE=\ET:kI=\EQ:kL=\ER:kN=\EK:kP=\EJ:\ :kS=\EY:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:\ :ll=^^^K:mb=\EG2:me=\E(\EH\003\EG0\EcD:mh=\EGp:\ :mk=\EG1:mp=\E):mr=\EG4:nd=^L:nw=\r\n:pf=^T:\ :pl=\EZ2%+?%s\177:pn=\Ez%+/%s\r:po=\Ed#:ps=\EP:\ :px=\EZ1%+?%s\177:r1=\E~!\E~4:r2=\EeF\E`\072:\ :r3=\EwG\Ee(:\ :..sa=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%'0'%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c:\ :se=\EG0:sf=\n:so=\EGt:sr=\Ej:st=\E1:ta=\011:te=\Ew1:\ :ti=\Ew0:ts=\EF:ue=\EG0:up=^K:us=\EG8:ve=\E`1:\ :vi=\E`0: # wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column:\ :Nl#16:co#132:lw#7:ws#97:\ :cm=\Ea%i%dR%dC:dc=\EW:ip=:r2=\E`;:tc=wy120: # wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines:\ :Nl@:lh@:li#25:lw@:\ :pn@:r3=\EwG\Ee):tc=wy120: # wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines:\ :Nl@:lh@:li#25:lw@:\ :pn@:r3=\EwG\Ee):tc=wy120-w: # wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell:\ :vb=\E`8\E`9:tc=wy120: # wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell:\ :vb=\E`8\E`9:tc=wy120-w: # # The Wyse 60 is like the Wyse 50 but with more padding. # The reset strings are slow and the pad times very depending # on other parameters such as font loading. I have tried # to follow the following outline: # rs1 -> set personality # rs2 -> set number of columns # rs3 -> set number of lines # is1 -> select the proper font # is2 -> do the initialization # is3 -> set up display memory (2 pages) # # The Wyse 60's that have vt100 emulation are slower than the # older Wyse 60's. This change happened mid-1987. # The capabilities effected are (dch1) (dl1) (il1) (ind) (ri) # # The meta key is only half right. This terminal will return the # high order bit set when you hit CTRL-function_key # # It may be useful to assign two function keys with the # values \E=(\s look at old data in page 1 # \E=W, look at bottem of page 1 # where \s is a space ( ). # # Note: # The Wyse 60 runs faster when the XON/XOFF # handshake is turned off. # wy60|wyse60|Wyse 60:\ :5i:am:bs:bw:hs:km:mi:ms:\ :Nl#8:co#80:lh#1:li#24:lw#8:ws#45:\ :#2=\E{:%9=\EP:&3=\Er:@8=\E7:DK=\E`b:F1=^AJ\r:\ :F2=^AK\r:F3=^AL\r:F4=^AM\r:F5=^AN\r:F6=^AO\r:\ :LF=\EA11:LO=\EA10:RA=\Ed.:RC=\E`c:RX=\Ec20:SA=\Ed/:\ :SX=\Ec21:\ :ac=+/\\\054.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~:\ :ae=\EcD:al=\EE:as=\EcE:bl=^G:bt=\EI:cd=\EY:ce=\ET:\ :cl=\E+:cm=\E=%+ %+ :cr=^M:ct=\E0:dc=\EW:dl=\ER:\ :do=^J:ds=\EF\r:ei=\Er:fs=^M:ho=^^:i1=\EcB0\EcC1:\ :i2=\EwJ\Ew1:im=\Eq:ip=:\ :is=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El:\ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:\ :k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kA=\EE:\ :kB=\EI:kD=\EW:kE=\ET:kI=\EQ:kL=\ER:kN=\EK:kP=\EJ:\ :kS=\EY:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:\ :ll=^^^K:mb=\EG2:me=\E(\EH\003\EG0\EcD:mh=\EGp:\ :mk=\EG1:mp=\E):mr=\EG4:nd=^L:nw=\r\n:pf=^T:\ :pl=\EZ2%+?%s\177:pn=\Ez%+/%s\r:po=\Ed#:ps=\EP:\ :px=\EZ1%+?%s\177:r1=\E~!\E~4:r2=\EeG:r3=\EwG\Ee(:\ :..sa=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%'0'%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c:\ :se=\EG0:sf=\n:so=\EGt:sr=\Ej:st=\E1:ta=\011:te=\Ew1:\ :ti=\Ew0:ts=\EF:ue=\EG0:up=^K:us=\EG8:ve=\E`1:\ :vi=\E`0: # wy60-w|wyse60-w|wyse 60 132-column:\ :Nl#16:co#132:lw#7:ws#97:\ :cm=\Ea%i%dR%dC:dc=\EW:ip=:r2=\EeF\E`;:tc=wy60: # wy60-25|wyse60-25|wyse 60 80-column 25-lines:\ :Nl@:lh@:li#25:lw@:\ :pn@:r3=\EwG\Ee):tc=wy60: wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines:\ :Nl@:lh@:li#25:lw@:\ :pn@:r3=\EwG\Ee):tc=wy60-w: # wy60-42|wyse60-42|wyse 60 80-column 42-lines:\ :li#42:\ :al=\EE:cd=\Ey:cl=\E+:cm=\E=%+ %+ :dc=\EW:dl=\ER:\ :i1=\EcB2\EcC3:ip=:nw=\r\n:r3=\Ee*:sf=\n:sr=\Ej:tc=wy60: wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines:\ :Nl#16:co#132:lw#7:ws#97:\ :cd=\Ey:cl=\E+:cm=\Ea%i%dR%dC:dc=\EW:ho=\036:ip=:\ :nw=\r\n:r2=\EeF\E`;:tc=wy60-42: # wy60-43|wyse60-43|wyse 60 80-column 43-lines:\ :Nl@:lh@:li#43:lw@:\ :pn@:r3=\Ee+:tc=wy60-42: wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines:\ :Nl@:lh@:li#43:lw@:\ :pn@:r3=\Ee+:tc=wy60-42-w: # wy60-vb|wyse60-vb|Wyse 60 visible bell:\ :vb=\E`8\E`9:tc=wy60: wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell:\ :vb=\E`8\E`9:tc=wy60-w: # The Wyse-99GT looks at lot like the Wyse 60 except that it # does not have the 42/43 line mode. In the Wyse-60 the "lines" # setup parameter controls the number of lines on the screen. # For the Wyse 99GT the "lines" setup parameter controls the # number of lines in a page. The screen can display 25 lines max. # The Wyse-99GT also has personalities for the VT220 and # Tektronix 4014. But this has no bearing on the native mode. # # (msgr) should be set but the clear screen fails when in # alt-charset mode. Try \EcE \E+ if the screen is really clear # then set msgr, else use msgr@. # # u0 -> enter Tektronix mode # u1 -> exit Tektronix mode # wy99gt|wyse99gt|Wyse 99gt:\ :ms@:\ :al=\EE:cd=\Ey:ce=\Et:cl=\E+:dc=\EW:dl=\ER:i2=\Ew0:\ :ip=:nw@:r2=\E`\072:sf=\n:sr=\Ej:ta=\011:te=\Ew0:\ :ti=\Ew1:u0=\E~>\E8:u1=\E[42h:tc=wy60: # wy99gt-w|wyse99gt-w|wyse 99gt 132-column:\ :Nl#16:co#132:lw#7:ws#97:\ :cd=\Ey:cl=\E+:cm=\Ea%i%dR%dC:dc=\EW:ip=:r2=\E`;:tc=wy99gt: # wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines:\ :Nl@:lh@:li#25:lw@:\ :pn@:r2=\E`\072:r3=\EwG\Ee):tc=wy99gt: # wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines:\ :Nl@:lh@:li#25:lw@:\ :pn@:r2=\E`;:tc=wy99gt-w: # wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell:\ :vb=\E`8\E`9:tc=wy99gt: # wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell:\ :vb=\E`8\E`9:tc=wy99gt-w: # # The Wyse 160 is combination of the WY-60 and the WY-99gt. # The reset strings are slow and the pad times very depending # on other parameters such as font loading. I have tried # to follow the following outline: # rs1 -> set personality # rs2 -> set number of columns # rs3 -> set number of lines # is1 -> select the proper font # is2 -> do the initialization # is3 -> set up display memory (2 pages) # # The display memory may be used for either text or graphics. # When "Display Memory = Shared" the terminal will have more pages # but garbage may be left on the screen when you switch from # graphics to text. If "Display Memory = Unshared" then the # text area will be only one page long. # wy160|wyse160|Wyse 160:\ :5i:am:bs:bw:hs:km:mi:ms:\ :Nl#8:co#80:lh#1:li#24:lw#8:ws#38:\ :#2=\E{:%9=\EP:&3=\Er:@8=\E7:DK=\E`b:F1=^AJ\r:\ :F2=^AK\r:F3=^AL\r:F4=^AM\r:F5=^AN\r:F6=^AO\r:\ :LF=\EA11:LO=\EA10:RA=\Ed.:RC=\E`c:RX=\Ec20:SA=\Ed/:\ :SX=\Ec21:\ :ac=+/\\\054.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~:\ :ae=\EcD:al=\EE:as=\EcE:bl=^G:bt=\EI:cd=\EY:ce=\ET:\ :cl=\E+:cm=\E=%+ %+ :cr=^M:ct=\E0:dc=\EW:dl=\ER:\ :do=^J:ds=\EF\r:ei=\Er:fs=^M:ho=^^:i1=\EcB0\EcC1:\ :i2=\Ew0:im=\Eq:ip=:\ :is=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El:\ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:\ :k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kA=\EE:\ :kB=\EI:kD=\EW:kE=\ET:kI=\EQ:kL=\ER:kN=\EK:kP=\EJ:\ :kS=\EY:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:\ :ll=^^^K:mb=\EG2:me=\E(\EH\003\EG0\EcD:mh=\EGp:\ :mk=\EG1:mp=\E):mr=\EG4:nd=^L:nw=\r\n:pf=^T:\ :pl=\EZ2%+?%s\177:pn=\Ez%+/%s\r:po=\Ed#:ps=\EP:\ :px=\EZ1%+?%s\177:r1=\E~!\E~4:r2=\E`\072:r3=\EwG\Ee(:\ :..sa=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%'0'%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c:\ :se=\EG0:sf=\n:so=\EGt:sr=\Ej:st=\E1:ta=^I:te=\Ew0:\ :ti=\Ew1:ts=\EF:ue=\EG0:up=^K:us=\EG8:ve=\E`1:\ :vi=\E`0: # wy160-w|wyse160-w|wyse 160 132-column:\ :Nl#16:co#132:lw#7:ws#90:\ :cm=\Ea%i%dR%dC:dc=\EW:r2=\EeF\E`;:tc=wy160: # wy160-25|wyse160-25|wyse 160 80-column 25-lines:\ :Nl@:lh@:li#25:lw@:\ :pn@:r3=\EwG\Ee):tc=wy160: wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines:\ :Nl@:lh@:li#25:lw@:\ :pn@:r3=\EwG\Ee):tc=wy160-w: # wy160-42|wyse160-42|wyse 160 80-column 42-lines:\ :li#42:\ :al=\EE:cd=\Ey:cl=\E+:dl=\ER:i1=\EcB2\EcC3:nw=\r\n:\ :r3=\Ee*:sf=\n:sr=\Ej:tc=wy160: wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines:\ :Nl#16:co#132:lw#7:ws#90:\ :cm=\Ea%i%dR%dC:dc=\EW:ip=:r2=\EeF\E`;:tc=wy160-42: # wy160-43|wyse160-43|wyse 160 80-column 43-lines:\ :Nl@:lh@:li#43:lw@:\ :pn@:r3=\Ee+:tc=wy160-42: wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines:\ :Nl@:lh@:li#43:lw@:\ :pn@:r3=\Ee+:tc=wy160-42-w: # wy160-vb|wyse160-vb|Wyse 160 visible bell:\ :vb=\E`8\E`9:tc=wy160: wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell:\ :vb=\E`8\E`9:tc=wy160-w: # # The Wyse 75 is a vt100 lookalike without advanced video. # # The Wyse 75 can support one attribute (e.g. Dim, Inverse, # Underline) without magic cookies. The following description # uses this capability, but when more than one attribute is # put on the screen at once, all attributes will be changed # to be the same as the last attribute given. # The Wyse 75 can support more attributes when used with magic # cookies. The wy75-mc terminal description uses magic cookies # to correctly handle multiple attributes on a screen. # wy75|wyse75|wyse 75:\ :5i:am:bs:hs:mi:ms:xn:xo:\ :co#80:li#24:ma#1:pb#1201:ug#1:ws#78:\ :%1=\E[28~:%9=\E[?5i:*6=\E[4~:@0=\E[1~:@8=\EOM:\ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\E[23~:\ :F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:F6=\E[29~:\ :F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:FB=\E[35~:\ :IC=\E[%d@:K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:\ :LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ :ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[J:\ :ce=\E[K:ch=\E[%i%dG:cl=\E[H\E[J:cm=\E[%i%d;%dH:\ :cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\ :ds=\E[>\\\054\001\001\E[>-\001\001:eA=\E)0:\ :ec=\E[%dX:ei=\E[4l:fs=^A:ho=\E[H:\ :i1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h:i2=\E[m:\ :im=\E[4h:ip=:is=\E>\E(B\E)0\017:k1=\E[?5i:k2=\E[?3i:\ :k3=\E[2i:k4=\E[@:k5=\E[M:k6=\E[17~:k7=\E[18~:\ :k8=\E[19~:k9=\E[20~:k;=\E[21~:kA=\E[L:kE=\E[K:\ :kI=\E[@:kL=\E[M:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:\ :ke=\E>:kh=\E[H:kl=\E[D:kr=\E[C:ks=\E[?1l\E[?7h\E=:\ :ku=\E[A:le=^H:me=\E[m\017:mh=\E[0t\E[2m:\ :mr=\E[1t\E[7m:nd=\E[C:pf=\E[4i:po=\E[5i:ps=\E[0i:\ :r1=\E[13l\E[3l\E!p:r2=\E[35h\E[?3l:r3=\E[?5l:rc=\E8:\ :..sa=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;:\ :sc=\E7:se=\E[m:sf=\n:so=\E[1t\E[7m:sr=\EM:st=\EH:\ :ta=^I:ts=\E[>\\\054\001:ue=\E[m:up=\E[A:\ :us=\E[2t\E[4m:ve=\E[?25h:vi=\E[?25l: # # This terminal description uses the non-hidden attribute mode # (with magic cookie). # wy75-mc|wyse75-mc|wyse 75 with magic cookies:\ :ms@:\ :ma@:sg#1:ug#1:\ :ae=\E[0p\017:as=\E[0p\016:i2=\E[m\E[p:mb=\E[2p:\ :me=\E[0p\017:mh=\E[1p:mk=\E[4p:mr=\E[16p:\ :..sa=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;:\ :se=\E[0p:so=\E[17p:ue=\E[0p:us=\E[8p:tc=wy75: wy75-vb|wyse75-vb|wyse 75 with visible bell:\ :pb@:\ :vb=\E[30h\E\\\054\E[30l:tc=wy75: wy75-w|wyse75-w|wyse 75 in 132 column mode:\ :co#132:ws#130:\ :r2=\E[35h\E[?3h:tc=wy75: wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns:\ :pb@:\ :vb=\E[30h\E\\\054\E[30l:tc=wy75-w: # # Wyse 85 emulating a vt220 7 bit mode. # 24 line screen with status line. # # The vt220 mode permits more function keys but it wipes out # the escape key. I strongly reccomend that f11 be set to # escape (esc). # The terminal may have to be set for 8 data bits and 2 stop # bits for the arrow keys to work. # The Wyse 85 runs faster with XON/XOFF enabled. Also the # (dch) and (ich) work best when XON/XOFF is set. (ich) and # (dch) leave trash on the screen when used without XON/XOFF. # wy85|wyse85|wyse 85:\ :5i:am:bs:hs:mi:ms:xn:xo:\ :co#80:it#8:li#24:ws#80:\ :%1=\E[28~:*6=\E[4~:@0=\E[1~:@8=\EOM:AL=\E[%dL:\ :DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\E[23~:F2=\E[24~:\ :F3=\E[25~:F4=\E[26~:F5=\E[28~:F6=\E[29~:F7=\E[31~:\ :F8=\E[32~:F9=\E[33~:FA=\E[34~:IC=\E[%d@:K1=\EOw:\ :K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:LE=\E[%dD:RA=\E[?7l:\ :RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ :ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[J:\ :ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\ :cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\ :ds=\E[40l:eA=\E)0:ec=\E[%dX:ei=\E[4l:fs=\E[1;24r\E8:\ :ho=\E[H:i1=\E[62;1"p\E[?5W:i2=\E>\E(B\E)0\017\E[m:\ :im=\E[4h:ip=:\ :is=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h:\ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\ :k8=\E[19~:k9=\E[20~:k;=\E[21~:kD=\E[3~:kI=\E[2~:\ :kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:ke=\E>:kh=\E[26~:\ :kl=\E[D:kr=\E[C:ks=\E[?1l\E=:ku=\E[A:l1=PF1:l2=PF2:\ :l3=PF3:l4=PF4:le=^H:mb=\E[5m:md=\E[1m:me=\E[m\017:\ :mh=\E[2m:mk=\E[8m:mr=\E[7m:nd=\E[C:pf=\E[4i:\ :po=\E[5i:ps=\E[0i:r1=\E[13l\E[3l\E!p:\ :r2=\E[35h\E[?3l:r3=\E[?5l:rc=\E8:\ :..sa=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;:\ :sc=\E7:se=\E[m:sf=\n:so=\E[7m:sr=\EM:st=\EH:ta=\011:\ :ts=\E[40h\E7\E[25;%i%p1%dH:ue=\E[m:up=\E[A:us=\E[4m:\ :ve=\E[?25h:vi=\E[?25l: # # Wyse 85 with visual bell. wy85-vb|wyse85-vb|wyse 85 with visible bell:\ :vb=\E[30h\E\\\054\E[30l:tc=wy85: # # Wyse 85 in 132-column mode. wy85-w|wyse85-w|wyse 85 in 132-column mode:\ :co#132:ws#132:\ :r2=\E[35h\E[?3h:tc=wy85: # # Wyse 85 in 132-column mode with visual bell. wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns:\ :vb=\E[30h\E\\\054\E[30l:tc=wy85-w: # # Wyse 185 emulating a vt320 7 bit mode. # # This terminal always displays 25 lines. These lines may be used # as 24 data lines and a terminal status line (top or bottom) or # 25 data lines. The 48 and 50 line modes change the page size # and not the number of lines on the screen. # # The Compose Character key can be used as a meta key if changed # by set-up. # wy185|wyse185|wyse 185:\ :5i:am:bs:hs:km:mi:ms:xn:xo:\ :co#80:it#8:li#24:ws#80:\ :%1=\E[28~:*6=\E[4~:@0=\E[1~:@8=\EOM:AL=\E[%dL:\ :DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\E[23~:F2=\E[24~:\ :F3=\E[25~:F4=\E[26~:F5=\E[28~:F6=\E[29~:F7=\E[31~:\ :F8=\E[32~:F9=\E[33~:FA=\E[34~:IC=\E[%d@:K1=\EOw:\ :K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:LE=\E[%dD:RA=\E[?7l:\ :RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ :ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[J:\ :ce=\E[K:ch=\E[%i%d`:cl=\E[H\E[J:cm=\E[%i%d;%dH:\ :cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:cv=\E[%i%dd:dc=\E[P:\ :dl=\E[M:do=^J:ds=\E7\E[99;0H\E[K\E8:eA=\E)0:\ :ec=\E[%dX:ei=\E[4l:fs=\E[1;24r\E8:ho=\E[H:i1=\E[?5W:\ :i2=\E>\E(B\E)0\017\E[m:im=\E[4h:ip=:\ :is=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h:\ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\ :k8=\E[19~:k9=\E[20~:k;=\E[21~:kB=\E[Z:kD=\E[3~:\ :kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:ke=\E>:\ :kh=\E[26~:kl=\E[D:kr=\E[C:ks=\E[?1l\E=:ku=\E[A:\ :l1=PF1:l2=PF2:l3=PF3:l4=PF4:le=^H:mb=\E[5m:md=\E[1m:\ :me=\E[m\017:mh=\E[2m:mk=\E[8m:mr=\E[7m:nd=\E[C:\ :pf=\E[4i:po=\E[5i:ps=\E[0i:\ :r1=\E[13l\E[3l\E\\\E[63;1"p\E[!p:r2=\E[35h\E[?3l:\ :r3=\E[?5l\E[47h\E[40l\E[r:rc=\E8:\ :..sa=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;:\ :sc=\E7:se=\E[27m:sf=\n:so=\E[7m:sr=\EM:st=\EH:ta=^I:\ :te=\E[ R:ti=\E[ Q:ts=\E7\E[99;%i%p1%dH:ue=\E[24m:\ :up=\E[A:us=\E[4m:ve=\E[34h\E[?25h:vi=\E[?25l:\ :vs=\E[?25h\E[34l: # # Wyse 185 with 24 data lines and top status (terminal status) wy185-24|wyse185-24|wyse 185 with 24 data lines:\ :hs@:\ :ds@:fs@:r3=\E[?5l\E[47h\E[40l\E[1;24r:ts@:tc=wy185: # # Wyse 185 with visual bell. wy185-vb|wyse185-vb|wyse 185 with visible bell:\ :vb=\E[30h\E\\\054\E[30l:tc=wy185: # # Wyse 185 in 132-column mode. wy185-w|wyse185-w|wyse 185 in 132-column mode:\ :co#132:ws#132:\ :DC=\E[%dP:IC=\E[%d@:dc=\E[P:ei=:im=:ip=:\ :r2=\E[35h\E[?3h:tc=wy185: # # Wyse 185 in 132-column mode with visual bell. wy185-wvb|wyse185-wvb|wyse 185 with visible bell 132-columns:\ :vb=\E[30h\E\\\054\E[30l:tc=wy185-w: # wy325 terminfo entries # Done by Joe H. Davis 3-9-92 # lines 25 columns 80 # wy325|wyse325|Wyse-epc:\ :5i:am:bs:bw:hs:mi:\ :Nl#8:co#80:lh#1:li#24:lw#8:pb#9601:ws#45:\ :#2=\E{:%9=\EP:&3=\Er:@8=\E7:F1=^AJ\r:F2=^AK\r:\ :F3=^AL\r:F4=^AM\r:F5=^AN\r:F6=^AO\r:LF=\EA11:\ :LO=\EA10:RA=\Ed.:SA=\Ed/:\ :ac=+/\\\054.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~:\ :ae=\EcD:al=\EE:as=\EcE:bl=^G:bt=\EI:cd=\EY:ce=\ET:\ :cl=\E+:cm=\E=%+ %+ :cr=^M:ct=\E0:dc=\EW:dl=\ER:\ :do=^J:ds=\EF\r:ei=\Er:fs=^M:ho=^^:i1=\EcB0\EcC1:\ :i2=\Ew0:im=\Eq:ip=:\ :is=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El:\ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:\ :k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kA=\EE:\ :kB=\EI:kD=\EW:kE=\ET:kI=\Eq:kL=\ER:kN=\EK:kP=\EJ:\ :kS=\EY:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:\ :ll=^^^K:mb=\EG2:me=\E(\EH\003\EG0\EcD:mh=\EGp:\ :mk=\EG1:mp=\E):mr=\EG4:nd=^L:pf=^T:pl=\EZ2%+?%s\177:\ :pn=\Ez%+/%s\r:po=\Ed#:ps=\EP:px=\EZ1%+?%s\177:\ :r1=\E~!\E~4:r2=\EeF\E`\072:r3=\EwG\Ee(:\ :..sa=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%'0'%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c:\ :se=\EG0:sf=\n:so=\EGt:sr=\Ej:st=\E1:ta=^I:te=\Ew0:\ :ti=\Ew1:ts=\EF:ue=\EG0:up=^K:us=\EG8:ve=\E`1:\ :vi=\E`0: # # lines 24 columns 80 vb # wy325-vb|wyse325-vb|wy150-vb:\ :vb=\E`8\E`9:tc=wy325: # # lines 24 columns 132 # wy325-w|wyse325-w|wy325w-24:\ :Nl#16:co#132:lw#7:ws#97:\ :cm=\Ea%i%dR%dC:dc=\EW:ip=:r2=\E`;:tc=wy325: # # lines 25 columns 80 # wy325-25|wyse325-25|wy325-80:\ :Nl@:lh@:li#25:lw@:\ :pn@:r3=\EwG\Ee):tc=wy325: # # lines 25 columns 132 # wy325-25w|wyse325-25w|wy325 132 columns:\ :Nl@:lh@:li#25:lw@:\ :pn@:r3=\EwG\Ee):tc=wy325-w: # # lines 25 columns 132 vb # wy325-w-vb|wy325-wvb|wyse325-wvb:\ :vb=\E`8\E`9:tc=wy325-w: # # lines 42 columns 80 # wy325-42|wyse325-42:\ :Nl@:lh@:li#42:lw@:\ :pn@:r3=\EwG\Ee):tc=wy325: # # lines 42 columns 132 # wy325-42w|wyse325-42w:\ :Nl@:lh@:li#42:lw@:\ :pn@:r3=\EwG\Ee):tc=wy325-w: # # lines 42 columns 132 vb # wy325-42w-vb|wy325-42wvb:\ :vb=\E`8\E`9:tc=wy325-w: # # lines 43 columns 80 # wy325-43|wyse325-43:\ :Nl@:lh@:li#43:lw@:\ :pn@:r3=\EwG\Ee):tc=wy325: # # lines 43 columns 132 # wy325-43w|wyse325-43w:\ :Nl@:lh@:li#43:lw@:\ :pn@:r3=\EwG\Ee):tc=wy325-w: # # lines 43 columns 132 vb # wy325-43w-vb|wy325-43wvb:\ :vb=\E`8\E`9:tc=wy325-w: # Wyse 370 # # 24 line screen with status line. # # The terminal may have to be set for 8 data bits and 2 stop # bits for the arrow keys to work. # # If you change keyboards the terminal will send different # escape sequences. # The following definition is for the basic terminal without # function keys. # # u0 -> enter Tektronix 4010/4014 mode # u1 -> exit Tektronix 4010/4014 mode # u2 -> enter ASCII mode (from any ANSI mode) # u3 -> exit ASCII mode (goto native ANSI mode) # u4 -> enter Tek 4207 ANSI mode (from any ANSI mode) # u5 -> exit Tek 4207 mode (goto native ANSI mode) # # (untranslatable capabilities removed to fit entry within 1023 bytes) # WARNING: this entry, 1201 bytes long, may core-dump older termcap libraries! wy370-nk|wyse 370 without function keys:\ :5i:am:bs:cc:hs:mi:ms:xn:xo:\ :Co#64:NC#48:co#80:it#8:li#24:pa#64:ws#80:\ :AL=\E[%dL:DC=\E[%dP:DK=\E[31h:DL=\E[%dM:DO=\E[%dB:\ :IC=\E[%d@::LE=\E[%dD:RA=\E[?7l:RC=\E[31l:RI=\E[%dC:\ :SA=\E[?7h:Sb=\E[62;%dw:Sf=\E[61;%dw:UP=\E[%dA:\ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ :ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[J:\ :ce=\E[K:ch=\E[%i%d`:cl=\E[H\E[J:cm=\E[%i%d;%dH:\ :cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:cv=\E[%i%dd:dc=\E[P:\ :dl=\E[M:do=^J:ds=\E[40l:eA=\E)0:ec=\E[%dX:ei=\E[4l:\ :fs=\E[1;24r\E8:ho=\E[H:i1=\E[90;1"p\E[?5W:\ :i2=\E>\017\E)0\E(B\E[63;0w\E[m:im=\E[4h:ip=:\ :is=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h:\ :ke=\E>:ks=\E[?1l\E=:le=^H:mb=\E[5m:md=\E[1m:\ :me=\E[m\017:mh=\E[2m:mk=\E[8m:mr=\E[7m:nd=\E[C:\ :oc=\E[60w\E[63;0w\n\E[66;1;4w\n\E[66;2;13w\n\E[66;3;16w\n\E[66;4;49w\n\E[66;5;51w\n\E[66;6;61w\n\E[66;7;64w:\ :op=\E[m:pf=\E[4i:po=\E[5i:ps=\E[0i:\ :r1=\E[13l\E[3l\E!p\E[?4i:r2=\E[35h\E[?3l:r3=\E[?5l:\ :rc=\E8::sc=\E7:se=\E[27m:sf=\n:so=\E[7m:sr=\EM:\ :st=\EH:ta=\011:te=\E[ R:ti=\E[ Q:\ :ts=\E[40l\E[40h\E7\E[99;%i%p1%dH:u0=\E[?38h\E8:\ :u1=\E[?38l\E)0:u2=\E[92;52"p:u3=\E~B:u4=\E[92;76"p::\ :ue=\E[24m:up=\E[A:us=\E[4m:ve=\E[34h\E[?25h:\ :vi=\E[?25l:vs=\E[?25h\E[34l: # # Function key set for the ASCII (wy-50 compatable) keyboard # wy370-101k|Wyse 370 with 101 key keyboard:\ :@8=\EOM:F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:\ :F5=\E[28~:F6=\E[29~:k1=\E[?4i:k2=\E[?3i:k3=\E[2i:\ :k4=\E[@:k5=\E[M:k6=\E[17~:k7=\E[18~:k8=\E[19~:\ :k9=\E[20~:k;=\E[21~:kA=\EOP:kB=\E[Z:kD=\EOQ:kI=\EOP:\ :kL=\EOQ:kN=\E[U:kP=\E[V:kb=^H:kd=\E[B:kh=\E[H:\ :kl=\E[D:kr=\E[C:ku=\E[A:tc=wy370-nk: # # Function key set for the VT-320 (and wy85) compatable keyboard # wy370-105k|Wyse 370 with 105 key keyboard:\ :%1=\E[28~:*6=\E[4~:@0=\E[1~:@8=\EOM:F1=\E[23~:\ :F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:F6=\E[29~:\ :F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:K1=\EOw:\ :K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:k1=\EOP:k2=\EOQ:\ :k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:k8=\E[19~:\ :k9=\E[20~:k;=\E[21~:kD=\E[3~:kI=\E[2~:kN=\E[6~:\ :kP=\E[5~:kb=^H:kd=\E[B:kh=\E[26~:kl=\E[D:kr=\E[C:\ :ku=\E[A:l1=PF1:l2=PF2:l3=PF3:l4=PF4:tc=wy370-nk: # # Function key set for the PC compatable keyboard # wy370-EPC|Wyse 370 with 102 key keyboard:\ :@7=\E[1~:@8=\EOM:F1=\E[23~:F2=\E[24~:k1=\EOP:\ :k2=\EOQ:k3=\EOR:k4=\EOS:k5=\E[M:k6=\E[17~:k7=\E[18~:\ :k8=\E[19~:k9=\E[20~:k;=\E[21~:kB=\E[Z:kI=\E[2~:\ :kN=\E[U:kP=\E[V:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:\ :kr=\E[C:ku=\E[A:tc=wy370-nk: # # Set up the default WY-370. # wy370|wyse370|Wyse 370:\ :tc=wy370-101k: # # Wyse 370 with visual bell. wy370-vb|Wyse 370 with visible bell:\ :vb=\E[30h\E\\\054\E[30l:tc=wy370: # # Wyse 370 in 132-column mode. wy370-w|Wyse 370 in 132-column mode:\ :co#132:ws#132:\ :r2=\E[35h\E[?3h:tc=wy370: # # Wyse 370 in 132-column mode with visual bell. wy370-wvb|Wyse 370 with visible bell 132-columns:\ :vb=\E[30h\E\\\054\E[30l:tc=wy370-w: wy370-rv|Wyse 370 reverse video:\ :r3=\E[32h\E[?5h:tc=wy370: # # Wyse 99gt Tektronix 4010/4014 emulator, # wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator:\ :am:bs:os:\ :co#74:li#35:\ :bl=^G:cl=\E^L:\ :..cm=\035%{3040}%{89}%p1%*%-%Py\n%p2%{55}%*%Px\n%gy%{128}%/%{31}%&%{32}%+%c\n%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c\n%gy%{004}%/%{31}%&%{96}%+%c\n%gx%{128}%/%{31}%&%{32}%+%c\n%gx%{004}%/%{31}%&%{64}%+%c\037:\ :cr=^M:do=^J:ff=^L:\ :hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037:\ :ho=^]7`x @\037:\ :hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037:\ :is=\E8:le=^H:nd= :nw=^M^J:u0=\E~>\E8:u1=\E[42h:\ :up=^K: # # Wyse 160 Tektronix 4010/4014 emulator, # wy160-tek|Wyse 160 Tektronix 4010/4014 emulator:\ :..cm=\035%{3103}%{91}%p1%*%-%Py\n%p2%{55}%*%Px\n%gy%{128}%/%{31}%&%{32}%+%c\n%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c\n%gy%{004}%/%{31}%&%{96}%+%c\n%gx%{128}%/%{31}%&%{32}%+%c\n%gx%{004}%/%{31}%&%{64}%+%c\037:\ :ho=^]8`g @\037:tc=wy99gt-tek: # # Wyse 370 Tektronix 4010/4014 emulator, # wy370-tek|Wyse 370 Tektronix 4010/4014 emulator:\ :am:bs:os:\ :co#80:li#36:\ :bl=^G:cl=\E^L:\ :..cm=\035%{775}%{108}%p1%*%{5}%/%-%Py\n%p2%{64}%*%{4}%+%{5}%/%Px\n%gy%{32}%/%{31}%&%{32}%+%c\n%gy%{31}%&%{96}%+%c\n%gx%{32}%/%{31}%&%{32}%+%c\n%gx%{31}%&%{64}%+%c\037:\ :cr=^M:do=^J:ff=^L:\ :hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037:\ :ho=^]8g @\037:\ :hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037:\ :is=\E8:kb=^H:kd=^J:kl=^H:kr=^I:ku=^K:le=^H:nd= :\ :nw=^M^J:u0=\E[?38h\E8:u1=\E[?38l\E)0:up=^K: # Vendor-supplied Wyse entries end here. # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu> wy100q|Wyse 100 for Quotron:\ :bs:\ :co#80:li#24:sg#1:ug#1:\ :al=\EE:bt=\EI:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :\ :dc=\EW:dl=\ER:do=^J:ei=\Er:ho=^^:im=\Eq:\ :is=\E`\072\200\EC\EDF\E0\E'\E(\EA21:kd=^J:kl=^H:\ :kr=^L:ku=^K:nd=^L:se=\EG0:so=\EG4:sr=\Ej:ue=\EG0:\ :up=^K:us=\EG8: #### Kermit terminal emulations # # Obsolete Kermit versions may be listed in the section describing obsolete # non-ANSI terminal emulators later in the file. # # KERMIT standard all versions. # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi. # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr) # From: greg small <gts@populi.berkeley.edu> 9-25-84 kermit|standard kermit:\ :bs:\ :co#80:li#24:\ :cd=\EJ:ce=\EK:cl=\EE:cm=\EY%+ %+ :ho=\EH:\ :is=K0 Standard Kermit 9-25-84\n:kd=^J:kh=^^:kl=^H:\ :kr=^L:ku=^K:nd=\EC:up=\EA: kermitam|standard kermit plus auto-margin:\ :am:\ :is=K1 Standard Kermit plus Automatic Margins\n:tc=kermit: # IBMPC Kermit 1.2. # Bugs :cd:ce: do not work except at beginning of line! :cl: does not work, # but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of line). # From: greg small <gts@populi.berkeley.edu> 8-30-84 pckermit|pckermit12|UCB IBMPC Kermit 1.2:\ :am:\ :li#25:\ :cd@:ce@:cl=\EH\EJ:\ :is=K2 UCB IBMPC Kermit 1.2 8-30-84\n:tc=kermit: # IBMPC Kermit 1.20 # Cannot use line 25, now acts funny like ansi special scrolling region. # Initialization must escape from that region by cursor position to line 24. # Cannot use character insert because 1.20 goes crazy if insert at col 80. # Does not use am: because autowrap mode lost when kermit dropped and restarted. # (pckermit: mapped ":pt:" to ":it#8:" -- esr) # From: greg small <gts@populi.berkeley.edu> 12-19-84 pckermit120|UCB IBMPC Kermit 1.20:\ :am@:pt:\ :it#8:li#24:\ :al=\EL:dc=\EN:dl=\EM:do=\EB:ei@:im@:\ :is=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n:\ :se=\Eq:so=\Ep:vs=\EO\Eq\EEK3:tc=kermit: # MS-DOS Kermit 2.27 for the IBMPC # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi. # Cannot use line 25, now acts funny like ansi special scrolling region. # Initialization must escape from that region by cursor position to line 24. # Does not use am: because autowrap mode lost when kermit dropped and restarted. # Reverse video for standout like H19. # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:"; # mapped ":pt:" to ":it#8:" -- esr) # From: greg small <gts@populi.berkeley.edu> 3-17-85 msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC:\ :am@:bs:pt:\ :co#80:it#8:li#24:\ :al=\EL:cd=\EJ:ce=\EK:cl=\EE:cm=\EY%+ %+ :dc=\EN:\ :dl=\EM:do=\EB:ei=\EO:ho=\EH:im=\E@:\ :is=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n:\ :kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:nd=\EC:rc=\Ek:sc=\Ej:\ :se=\Eq:so=\Ep:up=\EA:vs=\EO\Eq\EG\EwK4: # MS-DOS Kermit 2.27 with automatic margins # From: greg small <gts@populi.berkeley.edu> 3-17-85 msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins:\ :am:\ :is=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n:\ :vs=\EO\Eq\EG\EvK5:tc=msk227: # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC # Automatic margins now default. Use ansi set graphic rendition for standout, # underline and ul codes (:md:,:me:,:mr:). Define function keys. # (msk22714: removed obsolete ":kn#10:" -- esr) # From: greg small <gts@populi.berkeley.edu> 3-17-85 msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC:\ :am:\ :is=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n:\ :k0=\E0:k1=\E1:k2=\E2:k3=\E3:k4=\E4:k5=\E5:k6=\E6:\ :k7=\E7:k8=\E8:k9=\E9:md=\E[1m:me=\E[m:mr=\E[7m:\ :se=\E[m:so=\E[1m:ue=\E[m:us=\E[4m:vs=\EO\Eq\EG\EvK6:tc=mskermit227: # This was designed for a VT320 emulator, but it is probably a good start # at support for the VT320 itself. # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu. vt320-k3|MS-Kermit 3.00's vt320 emulation:\ :am:es:hs:km:mi:ms:xn:\ :co#80:it#8:li#49:pb#9600:vt#3:\ :AL=\E[%dL:CC=\E:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\ :IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:SR=\E[%dL:UP=\E[%dA:\ :ae=\E(B:al=\E[L:as=\E(0:bl=^G:cd=\E[J:ce=\E[K:\ :ch=\E[%i%dG:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\ :cs=\E[%i%d;%dr:ct=\E[3g:cv=\E[%i%dd:dc=\E[P:dl=\E[M:\ :do=^J:ds=\E[0$~:ec=\E[%dX:ei=\E[4l:fs=\E[0$}:\ :ho=\E[H:im=\E[4h:is=\E>\E F\E[?1l\E[?7h\E[r\E[2$~:\ :k0=\E[21~:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:\ :k7=\E[18~:k8=\E[19~:k9=\E[20~:kI=\E[2~:kL=\E[3~:\ :kN=\E[6~:kP=\E[5~:kb=^H:kd=\EOB:ke=\E[?1l\E>:\ :kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:\ :md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nw=^M^J:pf=\E[4i:\ :po=\E[5i:ps=\E[0i:\ :r1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E4i\E?4i\E[m\E[r\E[2$~:\ :rc=\E8:sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:\ :st=\EH:ta=^I:ts=\E[1$}\r\E[K:ue=\E[24m:up=\E[A:\ :us=\E[4m:vb=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l:\ :ve=\E[?25h:vi=\E[?25l: ######## OLDER TERMINAL TYPES # # This section is devoted to older commercial terminal brands that are now # discontinued, but known to be still in use or represented by emulations. # #### AT&T (att, tty) # # This section also includes Teletype-branded VDTs. # # The AT&T/Teletype terminals group was sold to SunRiver Data Systems; for # details, see the header comment on the ADDS section. # # These are AT&T's official terminfo entries # att2300|ATT2300|sv80|AT&T 2300 Video Information Terminal 80 column mode:\ :am:eo:mi:ms:xo:\ :co#80:it#8:li#24:\ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\E[11r:\ :F2=\E[12r:F3=\E[13r:F4=\E[14r:F5=\E[15r:F6=\E[16r:\ :IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:al=\E[L:\ :bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\ :cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:\ :ho=\E[H:im=\E[4h:k1=\E[1r:k2=\E[2r:k3=\E[3r:\ :k4=\E[4r:k5=\E[5r:k6=\E[6r:k7=\E[7r:k8=\E[8r:\ :k9=\E[9r:k;=\E[10r:kA=\E[L:kB=\E[Z:kC=\E[J:kD=\E[P:\ :kI=\E[@:kL=\E[M:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:\ :kr=\E[C:ku=\E[A:le=^H:me=\E[m:mr=\E[7m:nd=\E[C:\ :pf=\E[4i:po=\E[5i:ps=\E[0i:se=\E[0m:sf=^J:so=\E[7m:\ :ta=^I:up=\E[A: att2350|AT&T 2350 Video Information Terminal 80 column mode:\ :pf@:po@:ps@:tc=att2300: att2300-x40|sv40|AT&T 2300 Video Information Terminal 40 column mode:\ :co#40:it#5:li#23:\ :AL@:al@:tc=att2300: att2350-x40|ATT2350-x40|AT&T 2350 Video Information Terminal 40 column mode:\ :co#40:it#5:li#23:\ :AL@:al@:tc=att2350: # Must setup RETURN KEY - CR, REC'VD LF - INDEX. # Seems upward compatible with vt100, plus ins/del line/char. # On sgr, the protection parameter is ignored. # No check is made to make sure that only 3 parameters are output. # standout= reverse + half-intensity = 3 | 5. # bold= reverse + underline = 2 | 3. # note that half-bright blinking doesn't look different from normal blinking. # NOTE:you must program the function keys first, label second! att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1:\ :am:hs:mi:ms:xo:\ :Nl#8:co#80:it#8:lh#2:li#24:lw#8:ws#80:\ :ac=``aaffhhggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~00++--\\\054\\\054..:\ :ae=^O:al=\E[L:as=^N:bl=^G:cd=\E[J:ce=\E[K:\ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\ :dc=\E[P:dl=\E[M:do=\E[B:ei=:fs=\E8:ho=\E[H:\ :i1=\E[?3l\E)0:\ :i2=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW:\ :ic=\E[@:im=:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOT:\ :k6=\EOU:k7=\EOV:k8=\EOW:kC=\E[2J:kH=\E[24;1H:kb=^H:\ :kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\ :ll=\E[24H:mb=\E[5m:md=\E[2;7m:me=\E[m\017:mh=\E[2m:\ :mk=\E[8m:mr=\E[7m:nd=\E[C:nw=^M^J:\ :..pn=\E[%p1%d;00q%p2%\072-16s:\ :..px=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s:\ :r2=\Ec\E[?3l\E[2;0y:rc=\E8:\ :..sa=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;:\ :sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:ta=^I:\ :ts=\E7\E[25;%p1%{1}%+%dH:ue=\E[m:up=\E[A:us=\E[4m: att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1:\ :co#132:ws#132:\ :i1=\E[?3h\E)0:r2=\Ec\E[?3h\E[2;0y:tc=att5410v1: att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2:\ :..px=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s:tc=att5410v1: att4410-nfk|att5410-nfk|4410-nfk|tty5410-nfk|5410-nfk|version 1 AT&T 4410/5410 entry without function keys:\ :i3@:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:pn@:tc=att4410: att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode:\ :co#132:ws#132:\ :i1=\E[?3h\E)0:r2=\Ec\E[?3h\E[2;0y:tc=att4410: att5410-nsl|4410-nsl|att4410-nsl|ATT4410-nsl|tty5410-nsl|tty5410 entry without pln defined:\ :pn@:tc=att4410: otty5410|teletype 5410 for S5R2 curses:\ :ts=\E7\E[25;%p1%{1}%+%dH:tc=att4410: # 5410 in terms of a vt100 v5410|5410 in terms of a vt100:\ :am:mi:ms:xo:\ :co#80:it#8:li#24:vt#3:\ :@8=\EOM:K1=\EOq:K2=\EOr:K3=\EOs:K4=\EOp:K5=\EOn:\ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ :ae=^O:al=\E[L:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\ :ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:eA=\E(B\E)0:ei=:\ :ho=\E[H:ic=\E[@:im=:k0=\EOy:k1=\EOP:k2=\EOQ:k3=\EOR:\ :k4=\EOS:k5=\EOt:k6=\EOu:k7=\EOv:k8=\EOl:k9=\EOw:\ :k;=\EOx:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:\ :ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:\ :me=\E[m\017:mr=\E[7m:nd=\E[C:\ :r2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:\ :..sa=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;:\ :sc=\E7:se=\E[m:sf=^J:so=\E[1;7m:sr=\EM:st=\EH:ta=^I:\ :ue=\E[m:up=\E[A:us=\E[4m: # # Teletype Model 5420 -- A souped up 5410, with multiple windows, # even! the 5420 has three modes: scroll, window or page mode # this terminfo should work in scroll or window mode, but doesn't # take advantage of any of the differences between them. # # Has memory below (2 lines!) # 3 pages of memory (plus some spare) # The 5410 sequences for cup,cvvis,dch,dl,ech,flash,home,hpa,hts would work # for these, but these work in both scroll and window mode... # Unset insert character so insert mode works # is1 sets 80 column mode, # is2 escape sequence: # 1) turn off all fonts # 2) function keys off, keyboard lock off, control display off, # insert mode off, erasure mode off, # 3) full duplex, monitor mode off, send graphics off, nl on lf off # 4) reset origin mode # 5) set line wraparound # 6) exit erasure mode, positional attribute mode, and erasure extent mode # 7) clear margins # 8) program ENTER to transmit ^J, # We use \212 to program the ^J because a bare ^J will get translated by # UNIX into a CR/LF. The enter key is needed for AT&T uOMS. # 1 2 3 4 5 6 7 8 # is3 set screen color to black, # No representation in terminfo for the delete word key: kdw1=\Ed # Key capabilities assume the power-up send sequence... # This rmcup is not strictly necessary, but it helps maximize # memory usefulness: rmcup=\Ez, # Alternate sgr0: sgr0=\E[0m\EW^O, # Alternate sgr: sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;, # smkx programs the SYS PF keys to send a set sequence. # It also sets up labels f1, f2, ..., f8, and sends edit keys. # This string causes them to send the strings kf1-kf8 # when pressed in SYS PF mode. att4415|tty5420|att5420|AT&T 4415/5420 80 columns:\ :db:mi:xo:\ :Nl#8:lh#2:lm#78:lw#8:ws#55:\ :@1=\Et:@7=\Ez:@8=\Eent:AL=\E[%dL:\ :CM=\E[%i%p1%d;%p2%dt:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\ :IC=\E[%d@:LE=\E[%dD:LF=\E|:LO=\E~:RI=\E[%dC:\ :SF=\E[%dE:SR=\E[%dF:UP=\E[%dA:bt=\E[Z:ch=\E[%+^AG:\ :cl=\E[x\E[J:cm=\E[%i%d;%dx:ct=\E[3g:cv=\E[%+^Ad:\ :ec=\E[%ds\E[%dD:ei=\E[4l:ho=\E[x:i1=\E[?3l:\ :i2=\E[?5l:ic@:im=\E[4h:\ :is=\E[0m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212:\ :k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:k5=\EOg:k6=\EOh:\ :k7=\EOi:k8=\EOj:kA=\E[L:kB=\E[Z:kD=\E[P:kE=\E[2K:\ :kF=\E[T:kH=\Eu:kI=\E[4h:kL=\E[M:kN=\E[U:kP=\E[V:\ :kR=\E[S:ke=\E[19;0j\E[21;1j\212:\ :ks=\E[19;1j\E[21;4j\Eent:l1=F1:l2=F2:l3=F3:l4=F4:\ :l5=F5:l6=F6:l7=F7:l8=F8:ll=\Ew:me=\E[0m\017:mp=\EV:\ :pf=\E[?9i:..pn=\E[%p1%d;0;0;0q%p2%\072-16.16s:\ :po=\E[?4i:ps=\E[?2i:\ :..px=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s:\ :..sa=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;:\ :st=\EH:ts=\E7\E[25;%p1%{8}%+%dH:vb=\E[?5h\E[?5l:\ :ve=\E[11;0j:vs=\E[11;1j:tc=att4410: att4415-w|tty5420-w|att5420-w|5420-w|AT&T model 4415/5420 in 132 column mode:\ :co#132:lm#54:ws#97:\ :i1=\E[?3h:tc=att4415: att4415-rv|tty5420-rv|att5420-rv|AT&T model 4415/5420 80 columns in reverse video:\ :i2=\E[?5h:vb=\E[?5l\E[?5h:tc=att4415: att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T model 4415/5420 132 columns in reverse video:\ :co#132:lm#54:ws#97:\ :i1=\E[?3h:i2=\E[?5h:vb=\E[?5l\E[?5h:tc=att4415: # Note that this mode permits programming USER PF KEYS and labels # However, when you program user pf labels you have to reselect # user pf keys to make them appear! att4415+nl|4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels:\ :k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:\ :..pn=\E[%p1%d;0;0;1q%p2%\072-16.16s:\ :..px=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s: att4415-nl|4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels:\ :k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:tc=att4415+nl:tc=att4415: att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels:\ :k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:tc=att4415+nl:tc=att4415-rv: att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels:\ :k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:tc=att4415+nl:tc=att4415-w: att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels:\ :k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:tc=att4415+nl:tc=att4415-w-rv: otty5420|teletype 5420 for SVR2 curses on the 3B-20's:\ :ch=\E[%+^AG:cv=\E[%+^Ad:tc=tty5420: att5420_2|AT&T 5420 model 2 in 80 column mode:\ :am:db:hs:mi:ms:xo:\ :Nl#8:co#80:it#8:lh#2:li#24:lm#78:lw#8:ws#55:\ :@1=\Et:@7=\Ez:@8=^J:AL=\E[%dL:CM=\E[%i%p1%d;%p2%dt:\ :DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:LE=\E[%dD:LF=\E|:\ :LO=\E~:RI=\E[%dC:SF=\E[%dE:SR=\E[%dF:UP=\E[%dA:\ :ae=^O:al=\E[L:as=^N:bt=\E[1Z:cb=\E[1K:cd=\E[0J:\ :ce=\E[0K:ch=\E[%+^AG:cl=\EH\EJ:cm=\E[%i%d;%dH:\ :cr=\EG:cs=\E[%i%d;%dr:ct=\E[3g:cv=\E[%+^Ad:dc=\E[P:\ :dl=\E[M:do=\E[1B:ec=\E[%ds\E[%dD:ei=:fs=\E8:ho=\E[H:\ :i1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r:\ :ic=\E[@:im=:k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:k5=\EOg:\ :k6=\EOh:k7=\EOi:k8=\EOj:kA=\E[L:kB=\E[Z:kC=\E[2J:\ :kD=\E[P:kE=\E[2K:kF=\E[T:kH=\Eu:kI=\E[4h:kL=\E[M:\ :kN=\E[U:kP=\E[V:kR=\E[S:kb=^H:kd=\E[B:ke=\E[19;0j:\ :kh=\E[H:kl=\E[D:kr=\E[C:ks=\E[19;1j:ku=\E[A:l1=F1:\ :l2=F2:l3=F3:l4=F4:l5=F5:l6=F6:l7=F7:l8=F8:le=^H:\ :ll=\Ew:mb=\E[5m:me=\E[0m\017:mh=\E[2m:mk=\E[8m:\ :mp=\EV:mr=\E[7m:nd=\E[1C:nw=^M^J:pf=\E[4i:\ :..pn=\E[%p1%d;0;0;0q%p2%\072-16.16s\E~:po=\E[5i:\ :ps=\E[?;2i:\ :..px=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~:\ :r2=\Ec\E[?3l\E[2;0y:rc=\E8:\ :..sa=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;:\ :sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\ :ts=\E7\E[25;%p1%{8}%+%dH:ue=\E[m:us=\E[4m:\ :vb=\E[?5h\E[?5l:ve=\E[11;0j:vs=\E[11;1j: att5420_2-w|AT&T 5420 model 2 in 132 column mode:\ :co#132:\ :i1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r:tc=att5420_2: att4418|att5418|ATT5418|AT&T 5418 in 80 column mode:\ :am:xo:\ :co#80:li#24:\ :@8=\E[:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\ :F1=\E[n:F2=\E[o:F3=\E[H:F4=\E[I:F5=\E[J:F8=\E[K:\ :F9=\E[L:FA=\E[E:FB=\E[_:FC=\E[M:FD=\E[N:FE=\E[O:\ :IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:\ :al=\E[1L:as=^N:bl=^G:cd=\E[0J:ce=\E[0K:cl=\E[H\E[2J:\ :cm=\E[%i%d;%dH:cr=^M:dc=\E[1P:dl=\E[M:do=\E[B:ei=:\ :ho=\E[H:i1=\E[?3l:ic=\E[1@:im=:is=\E)0\E?6l\E?5l:\ :k1=\E[h:k2=\E[i:k3=\E[j:k6=\E[k:k7=\E[l:k8=\E[f:\ :k9=\E[w:k;=\E[m:kC=\E[%:kd=\EU:kh=\Ec:kl=\E@:kr=\EA:\ :ku=\ES:le=\E[D:mb=\E[5m:me=\E[0m\017:mh=\E[2m:\ :mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[0m:sf=^J:\ :so=\E[7m:ue=\E[0m:up=\E[A:us=\E[4m: att4418-w|att5418-w|AT&T 5418 in 132 column mode:\ :co#132:\ :i1=\E[?3h:tc=att5418: tty4420|teletype 4420:\ :da:db:eo:ms:ul:xo:\ :co#80:li#24:lm#72:\ :al=\EL:bl=^G:cd=\EJ:ce=\Ez:cl=\EH\EJ:cm=\EY%+ %+ :\ :cr=\EG:dc=\EP:dl=\EM:dm@:do=\EB:ed@:ho=\EH:k0=\EU:\ :k3=\E@:kA=\EL:kB=\EO:kC=\EJ:kD=\EP:kF=\ES:kI=\E^:\ :kL=\EM:kR=\ET:kd=\EB:kh=\EH:kl=^H:kr=\EC:ku=\EA:\ :l0=segment advance:l3=cursor tab:le=\ED:nd=\EC:\ :se=\E~:sf=\EH\EM\EY7 :so=\E}:ue=\EZ:up=\EA:us=\E\\: # The following is a termcap entry for the Teletype 4424 # asynchronous keyboard-display terminal. It supports # the vi editor. The terminal must be "set up" as follows, # # HIGHLIGHT DEFINITION 3-TONE # DISPLAY FUNCTION GROUP III # # The second entry below provides limited (a la adm3a) # operation under GROUP II. # # This must be used with DISPLAY FUNCTION GROUP I or III # and HIGHLIGHT DEFINITION 3-TONE # The terminal has either bold or blink, depending on options # att4424|tty4424|4424-3|teletype 4424:\ :am:xo:\ :co#80:li#24:\ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\ :LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=\E(B:al=\EL:\ :as=\E(0:bl=^G:bt=\EO:cd=\EJ:ce=\Ez:cl=\E[H\E[2J:\ :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\EF:dc=\EP:\ :dl=\EM:do=\EB:ei=:ho=\E[H:ic=\E^:im=:\ :is=\E[20l\E[?7h:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\ :kC=\EJ:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:\ :ku=\E[A:le=^H:mb=\E3:md=\E3:me=\EX\E~\EZ\E4\E(B:\ :mh=\EW:mr=\E}:nd=\EC:nw=\EE:\ :..sa=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m:\ :se=\E~:sf=^J:so=\E}:sr=\ET:st=\EH:ta=^I:ti=\E[1m:\ :ue=\EZ:up=\EA:us=\E\\: att4424-1|tty4424-1|teletype 4424 in display function group I:\ :kC@:kd=\EB:kh@:kl=\ED:kr=\EC:ku=\EA:tc=att4424: # The Teletype 5425 is really version 2 of the Teletype 5420. It # is quite similar, except for some minor differences. No page # mode, for example, so all of the cup sequences used above have # to change back to what's being used for the 5410. Many of the # option settings have changed their numbering as well. # # This has been tested on a preliminary model. # att5425|tty5425|att4425|AT&T 4425/5425:\ :am:da:db:hs:mi:ms:xn:xo:\ :Nl#8:co#80:it#8:lh#2:li#24:lm#78:lw#8:ws#55:\ :@1=\Et:@7=\Ez:@8=\Eent:AL=\E[%dL:DC=\E[%dP:\ :DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:LF=\E|:\ :LO=\E~:RI=\E[%dC:SF=\E[%dE:SR=\E[%dF:UP=\E[%dA:\ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ :ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[J:\ :ce=\E[K:ch=\E[%+^AG:cl=\E[H\E[J:cm=\E[%i%d;%dH:\ :cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:cv=\E[%+^Ad:dc=\E[P:\ :dl=\E[M:do=^J:eA=\E(B\E)0:ec=\E[%ds\E[%dD:ei=\E[4l:\ :fs=\E8:ho=\E[H:i1=\E<\E[?3l:i2=\E[?5l:im=\E[4h:\ :is=\E[0m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212:\ :k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:k5=\EOg:k6=\EOh:\ :k7=\EOi:k8=\EOj:kA=\E[L:kB=\E[Z:kC=\E[J:kD=\E[P:\ :kE=\E[2K:kF=\E[T:kI=\E[4h:kL=\E[M:kR=\E[S:kb=^H:\ :kd=\E[B:ke=\E[21;0j\E[25;1j\212:kh=\E[H:kl=\E[D:\ :kr=\E[C:ks=\E[21;1j\E[25;4j\Eent\E~:ku=\E[A:le=^H:\ :ll=\E[24H:mb=\E[5m:md=\E[2;7m:me=\E[m\017:mh=\E[2m:\ :mk=\E[8m:mp=\EV:mr=\E[7m:nd=\E[C:nw=^M^J:pf=\E[?9i:\ :..pn=\E[%p1%d;0;0;0q%p2%\072-16.16s:po=\E[?4i:\ :ps=\E[?2i:\ :..px=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s:\ :r2=\Ec\E[?3l\E[2;0y:rc=\E8:\ :..sa=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;:\ :sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\ :ts=\E7\E[25;%p1%{8}%+%dH:ue=\E[m:up=\E[A:us=\E[4m:\ :vb=\E[?5h\E[?5l:ve=\E[12;0j:vs=\E[12;1j: att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels:\ :ks=\E[21;1j\E[25;4j\Eent:tc=att4425: att5425-nl-w|tty5425-nl-w|att4425-nl-w|AT&T 4425/5425 132 columns no labels:\ :ks=\E[21;1j\E[25;4j\Eent:tc=att4425-w: tty5425-fk|att4425-fk|AT&T 4425/5425 without function keys:\ :ke@:ks@:tc=att5425: att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode:\ :co#132:lm#54:ws#97:\ :i1=\E[?3h:tc=tty5425: tty5425-w-fk|att4425-w-fk|att5425-w-fk|AT&T 4425/5425 without function keys in wide mode:\ :ke@:ks@:tc=att5425-w: # This had bogus capabilities: ri=\EM, ri=\E[1U, att4426|tty4426|teletype 4426S:\ :am:da:db:xo:\ :co#80:li#24:lm#48:\ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\ :LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\ :ae=\E(B:al=\EL:as=\E(0:bl=^G:cd=\E[J:ce=\E[0K:\ :ch=\E[%dG:cl=\E[H\E[2J\E[1U\E[H\E[2J\E[1V:\ :cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:cv=\E[%dd:dc=\EP:\ :dl=\E[M:do=\E[B:ei=:ho=\E[H:i1=\Ec\E[?7h:ic=\E^:im=:\ :is=\E[m\E[1;24r:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\ :k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:kB=\EO:kC=\E[2J:\ :kH=\E[24;1H:kb=^H:kd=\EB:kh=\E[H:kl=\ED:kr=\EC:\ :ku=\EA:le=\E[D:ll=\E[24H:md=\E[5m:me=\E[0m\E(B:\ :mr=\E[7m:nd=\E[C:nw=^M^J:r2=\Ec\E[?3l\E[2;0y:rc=\E8:\ :sc=\E7:se=\E[0m:sf=^J:so=\E[5m:sr=\ET:st=\E1:ta=^I:\ :ue=\E[m:up=\EA:us=\E[4m: # Terminfo entry for the AT&T 510 A Personal Terminal # Function keys 9 - 16 are available only after the # screen labeled (soft keys/action blocks) are labeled. Function key # 9 corresponds to the leftmost touch target on the screen, # function key 16 corresponds to the rightmost. # # This entry is based on one done by Ernie Rice at Summit, NJ and # changed by Anne Gallup, Skokie, IL, ttrdc!anne att510a|510a|bct510a|510A|AT&T 510A Personal Terminal:\ :am:mi:ms:xn:xo:\ :Nl#8:co#80:lh#2:li#24:lw#7:\ :#4=\E[u:%i=\E[v:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:\ :DO=\E[%dB:F1=\EOe:F2=\EOf:F3=\EOg:F4=\EOh:F5=\EOi:\ :F6=\EOj:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\ :ac=hrisjjkkllmmnnqqttuuvvwwxx{{||}}~~-f\\\054h.e+g`b:\ :ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[0J:\ :ce=\E[0K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:\ :dc=\E[P:dl=\E[M:do=\E[1B:eA=\E(B\E)1:ff=^L:ho=\E[H:\ :i1=\E(B\E)1\E[2l:i2=\E[21;1|\212:k1=\EOm:k2=\EOV:\ :k3=\EOu:k4=\ENj:k5=\ENe:k6=\ENf:k7=\ENh:k8=\E[H:\ :k9=\EOc:k;=\EOd:kB=\E[Z:kF=\E[S:kR=\E[T:kb=^H:\ :kd=\E[B:ke=\E[19;0|:kl=\E[D:kr=\E[C:ks=\E[19;1|:\ :ku=\E[A:le=^H:mb=\E[5m:md=\E[2;7m:me=\E[m\017:\ :mh=\E[2m:mr=\E[7m:nd=\E[C:nw=\EE:pf=\E[?8i:\ :..pn=\E[%p1%dp%p2%\072-16s:po=\E[?4i:ps=\E[0i:\ :rc=\E8:\ :..sa=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;:\ :sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\ :ue=\E[m:up=\E[A:us=\E[4m:ve=\E[11;3|:vi=\E[11;0|:\ :vs=\E[11;2|: # Terminfo entry for the AT&T 510 D Personal Terminal # Function keys 9 through 16 are accessed by bringing up the # system blocks. # Function key 9 corresponds to the leftmost touch target on the screen, # function key 16 corresponds to the rightmost. # # There are problems with soft key labeling. These are due to # strangenesses in the native terminal that are impossible to # describe in a terminfo. att510d|510d|bct510d|510D|AT&T 510D Personal Terminal:\ :am:da:db:mi:ms:xn:xo:\ :Nl#8:co#80:lh#2:li#24:lm#48:lw#7:\ :#4=\E[u:%i=\E[v:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:\ :DO=\E[%dB:F1=\EOe:F2=\EOf:F3=\EOg:F4=\EOh:F5=\EOi:\ :F6=\EOj:IC=\E[%d@:LE=\E[%dD:LF=\E<:LO=\E?:MC=\E\072:\ :ML=\E4:MR=\E5:RI=\E[%dC:RX=\E[29;1|:SF=\E[%dS:\ :SR=\E[%dT:SX=\E[29;0|:UP=\E[%dA:\ :ac=hrisjjkkllmmnnqqttuuvvwwxx{{||}}~~-f\\\054h.e+g`b:\ :ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[0J:\ :ce=\E[0K:ch=\E[%+^AG:cl=\E[H\E[J:cm=\E[%i%d;%dH:\ :cr=^M:ct=\E[3g:cv=\E[%+^Ad:dc=\E[P:dl=\E[M:do=\E[1B:\ :eA=\E(B\E)1:ei=\E[4l:ff=^L:ho=\E[H:\ :i1=\E(B\E)1\E[5;0|:i2=\E[21;1|\212:im=\E[4h:k1=\EOm:\ :k2=\EOV:k3=\EOu:k4=\ENj:k5=\ENe:k6=\ENf:k7=\ENh:\ :k8=\E[H:k9=\EOc:k;=\EOd:kB=\E[Z:kF=\E[S:kR=\E[T:\ :kb=^H:kd=\E[B:ke=\E[19;0|:kl=\E[D:kr=\E[C:\ :ks=\E[19;1|:ku=\E[A:le=^H:ll=\E#2:mb=\E[5m:\ :md=\E[2;7m:me=\E[m\017:mh=\E[2m:mk=\E[8m:mr=\E[7m:\ :nd=\E[C:nw=\EE:pf=\E[?8i:..pn=\E[%p1%dp%p2%\072-16s:\ :po=\E[?4i:ps=\E[0i:r2=\E[5;0|:rc=\E8:\ :..rp=%p1%c\E[%p2%{1}%-%db:\ :..sa=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;:\ :sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\ :ue=\E[m:up=\E[A:us=\E[4m:ve=\E[11;3|:vs=\E[11;2|: # (untranslatable capabilities removed to fit entry within 1023 bytes) # WARNING: this entry, 1245 bytes long, may core-dump older termcap libraries! att513|att513-page|513-page|attis513-pfk|513bct|AT&T 513 Terminal using page mode:\ :HC:am:mi:ms:xn:xo:\ :Nl#8:co#80:lh#2:li#24:lw#8:\ :!1=\EOO:!2=\EOP:!3=\EOS:#1=\EOM:#2=\ENM:#3=\ENJ:\ :#4=\ENK:%0=\EOt:%1=\EOm:%2=\ENi:%3=\EOl:%4=\ENc:\ :%5=\ENh:%6=\EOv:%7=\EOr:%8=\ENg:%9=\EOz:%a=\EOL:\ :%b=\ENC:%c=\ENH:%d=\EOR:%e=\ENG:%f=\EOZ:%g=\EOT:\ :%h=\EOY:%i=\ENL:%j=\EOQ:&0=\EOW:&1=\EOb:&2=\ENa:\ :&3=\EOy:&4=\EOB:&5=\EOq:&6=\EOo:&7=\EOp:&8=\EOs:\ :&9=\ENB:*0=\EOX:*1=\EOU:*2=\END:*3=\EON:*4=\ENF:\ :*5=\ENE:*6=\ENI:*7=\ENN:*8=\EOA:*9=\EOK:@0=\EOx:\ :@1=\E9:@2=\EOw:@3=\EOV:@4=\EOu:@5=\ENd:@6=\EOn:\ :@7=\E0:@8=\Eent:@9=\EOk:AL=\E[%dL:DC=\E[%dP:\ :DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:LF=\E<:\ :LO=\E?:RI=\E[%dC:SF=\E[%dE:SR=\E[%dF:UP=\E[%dA:\ :ac=hrisjjkkllmmnnqqttuuvvwwxx{{||}}~~-f\\\054h.e+g`b:\ :ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[J:\ :ce=\E[K:ch=\E[%+^AG:cl=\E[H\E[J:cm=\E[%i%d;%dH:\ :cr=^M:cs=%i\E[%d;%dr:ct=\E[3g:cv=\E[%+^Ad:dc=\E[P:\ :dl=\E[M:do=^J:eA=\E(B\E)1:ei=\E[4l:ho=\E[H:\ :i1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l:\ :im=\E[4h:k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:k5=\EOg:\ :k6=\EOh:k7=\EOi:k8=\EOj:kB=\E[Z:kC=\E[J:kD=\ENf:\ :kE=\EOa:kF=\E[S:kI=\ENj:kL=\ENe:kN=\E[U:kP=\E[V:\ :kR=\E[T:kb=^H:kd=\E[B:ke=\E[19;0|\E[21;1|\212:\ :kh=\E[H:kl=\E[D:kr=\E[C:ks=\E[19;1|\E[21;4|\Eent:\ :ku=\E[A:le=^H:ll=\E#2:mb=\E[5m:md=\E[2;7m:\ :me=\E[m\017:mh=\E[2m:mk=\E[8m:mr=\E[7m:nd=\E[C:\ :nw=\EE:pf=\E[?98l\E[?8i::::po=\E[?98l\E[?4i:\ :ps=\E[?98l\E[0i::\ :r1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l:\ :r2=\E[5;0|:rc=\E8:::sc=\E7:se=\E[m:sf=^J:so=\E[7m:\ :sr=\EM:st=\EH:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:\ :ve=\E[11;0|:vs=\E[11;1|: att500|bct500|500|AT&T-IS 500 terminal:\ :tc=att513: # 01-07-88 # printer must be set to EMUL ANSI to accept ESC codes # cuu1 stops at top margin # is1 sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font # and alt font ascii,wrap on,tabs cleared # is2 disables newline on LF,Emphasized off # The u0 capability sets form length # (untranslatable capabilities removed to fit entry within 1023 bytes) # WARNING: this entry, 1034 bytes long, may core-dump older termcap libraries! att5320|AT&T Model 5320 matrix printer:\ :YA:YD:\ :Ya#8192:Yi#10:Yj#12:Yk#100:Yl#72:Ym#120:co#132:it#8:\ :li#66:\ :DO=\E[%de:RI=\E[%da:\ :ZA=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;:\ :ZB=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;:\ :ZM=\E[5m:ZU=\E[m:\ :Zj=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%ttM:\ :Zl=\E[;%dr:Zm=\E[%+^As:Zn=\E[;%+^As:Zp=\E[%dr:\ :Zy=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%ÆM:\ :ch=\E[%d`:cr=^M:cv=\E[%dd:do=^J:ff=^L:i1=\Ec:\ :is=\E[20l\r:nd= :ta=^I:u0=\E[%dt:up=\EM: att5310|AT&T 5310 matrix printer:\ :co#80:\ :tc=att5320: # 5620 terminfo (2.0 or later ROMS with char attributes) # assumptions: ind (scroll forward one line) is only done at screen bottom att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns:\ :NL:NP:am:xo:\ :co#88:it#8:li#70:\ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:SF=\E[%dS:\ :SR=\E[%dT:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\ :cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=\E[B:ei=:\ :ho=\E[H:ic=\E[@:im=:kC=\E[2J:kH=\E[70;1H:kb=^H:\ :kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\ :md=\E[2m:me=\E[0m:mh=\E[2m:mr=\E[7m:nd=\E[C:nw=^J:\ :..px=\E[%p1%d;%p2%l%dq%p2%s:r1=\Ec:rc=\E8:sc=\E7:\ :se=\E[0m:sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:ue=\E[0m:\ :up=\E[A:us=\E[4m: att5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer:\ :li#24:\ :tc=att5620: att5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer:\ :li#34:\ :tc=att5620: # Entries for kf15 thru kf28 refer to the shifted system pf keys. # # Entries for kf29 thru kf46 refer to the alternate keypad mode # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER att605|605bct|AT&T 605 80 column 102key keyboard:\ :am:eo:xo:\ :Nl#8:co#80:li#24:lw#8:ws#80:\ :#4=\E[ A:%i=\E[ @:@7=\E[24;1H:DC=\E[%dP:DL=\E[%dM:\ :F1=\ENq:F2=\ENr:F3=\ENs:F4=\ENt:F5=\EOC:F6=\EOD:\ :F7=\EOE:F8=\EOF:F9=\EOG:FA=\EOH:FB=\EOI:FC=\EOJ:\ :FD=\ENO:FE=\ENP:FF=\ENQ:FG=\ENR:FH=\ENS:FI=\ENT:\ :FJ=\EOP:FK=\EOQ:FL=\EOR:FM=\EOS:FN=\EOw:FO=\EOx:\ :FP=\EOy:FQ=\EOm:FR=\EOt:FS=\EOu:FT=\EOv:FU=\EOl:\ :FV=\EOq:FW=\EOr:FX=\EOs:FY=\EOp:FZ=\EOn:Fa=\EOM:\ :IC=\E[%d@:LF=\E[2p:LO=\E[p:\ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ :ae=^O:al=\E[L:as=\E)0\016:bl=^G:bt=\E[Z:cb=\E[1K:\ :cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\ :dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:fs=\E8:\ :i1=\E[8;0|\E[?\E[13;20l\E[?\E[12h:ic=\E[@:im=\E[4h:\ :is=\E[0m\017:k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:\ :k5=\EOg:k6=\EOh:k7=\EOi:k8=\EOj:k9=\ENo:k;=\ENp:\ :kA=\E[L:kB=\E[Z:kC=\E[2J:kD=\E[P:kF=\E[S:kI=\E[@:\ :kL=\E[M:kN=\E[U:kP=\E[V:kb=^H:kd=\E[B:kh=\E[H:\ :kl=\E[D:kr=\E[C:ku=\E[A:le=^H:ll=\E[24H:mb=\E[5m:\ :md=\E[1m:me=\E[m\017:mh=\E[2m:mk=\E[8m:mr=\E[7m:\ :nd=\E[C:nw=\EE:pf=\E[?4i:\ :..pn=\E[%p1%d;0;0;0q%p2%\072-16.16s:po=\E[?5i:\ :..px=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s:\ :r2=\Ec\E[?3l:rc=\E8:sc=\E7:se=\E[m:sf=^J:so=\E[7m:\ :ta=^I:ts=\E7\E[25;%i%p1%dx:ue=\E[m:up=\E[A:us=\E[4m: att605-pc|605bct-pc|ATT 605 in pc term mode:\ :@7=\E[F:AL=\E[L:S4=250\E[?11l\E[50;1|:\ :S5=400\E[50;0|:XF=g:XN=e:\ :ac=k\277l\332m\300j\331n\305w\302q\304u\264t\303v\301x\263:\ :al=\E[L:bt=\E[Z:dc=\E[P:dl=\E[M:do=\E[B:ei=:ic=\E[@:\ :im=:k1=\E[M:k2=\E[N:k3=\E[O:k4=\E[P:k5=\E[Q:k6=\E[R:\ :k7=\E[S:k8=\E[T:k9=\E[U:k;=\E[V:kB=\E[Z:kD=\E[P:\ :kI=\E[@:kL=\E[M:kN=\E[G:kP=\E[I:kd=\E[B:kh=\E[H:\ :kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:nd=\E[C:up=\E[A:tc=att605: att605-w|605bct-w|AT&T 605-w 132 column 102 key keyboard:\ :co#132:ws#132:\ :i1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0:tc=att605: att610|610bct|AT&T 610; 80 column; 98key keyboard:\ :am:es:hs:mi:ms:xn:xo:\ :Nl#8:co#80:it#8:lh#2:li#24:lw#8:ws#80:\ :#4=\E[ @:%i=\E[ A:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:\ :DO=\E[%dB:F1=\ENq:F2=\ENr:F3=\ENs:F4=\ENt:IC=\E[%d@:\ :LE=\E[%dD:LF=\E[2p:LO=\E[p:RI=\E[%dC:UP=\E[%dA:\ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ :ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[J:\ :ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\ :cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:\ :fs=\E8:ho=\E[H:\ :i1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0:\ :i2=\E(B\E)0:im=\E[4h:is=\E[0m\017:k1=\EOc:k2=\EOd:\ :k3=\EOe:k4=\EOf:k5=\EOg:k6=\EOh:k7=\EOi:k8=\EOj:\ :k9=\ENo:k;=\ENp:kB=\E[Z:kC=\E[2J:kF=\E[S:kR=\E[T:\ :kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\ :ll=\E[24H:mb=\E[5m:md=\E[1m:me=\E[m\017:mh=\E[2m:\ :mk=\E[8m:mr=\E[7m:nd=\E[C:nw=\EE:pf=\E[?4i:\ :..pn=\E[%p1%d;0;0;0q%p2%\072-16.16s:po=\E[?5i:\ :..px=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s:\ :r2=\Ec\E[?3l:rc=\E8:\ :..sa=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;:\ :sc=\E7:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:\ :ts=\E7\E[25;%i%p1%dx:ue=\E[m:up=\E[A:us=\E[4m:\ :vb=\E[?5h\E[?5l:ve=\E[?25h\E[?12l:vi=\E[?25l:\ :vs=\E[?12;25h: att610-w|610bct-w|AT&T 610; 132 column; 98key keyboard:\ :co#132:ws#132:\ :i1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h:tc=att610: att610-103k|610-103k|610bct-103k|AT&T 610; 80 column; 103key keyboard:\ :!1=\EOO:!2=\EOP:!3=\EOS:#1=\EOM:%0=\EOt:%1=\EOm:\ :%2=\ENi:%3=\EOl:%4=\ENc:%5=\ENh:%6=\EOv:%7=\EOr:\ :%8=\ENg:%9=\EOz:%a=\EOL:%b=\ENC:%c=\ENH:%d=\EOR:\ :%e=\ENG:%f=\EOZ:%g=\EOT:%h=\EOY:%j=\EOQ:&0=\EOW:\ :&1=\EOb:&2=\ENa:&3=\EOy:&4=\EOB:&5=\EOq:&6=\EOo:\ :&7=\EOp:&8=\EOs:&9=\ENB:*0=\EOX:*1=\EOU:*2=\END:\ :*3=\EON:*4=\ENF:*5=\ENE:*6=\ENI:*7=\ENN:*8=\EOA:\ :*9=\EOK:@0=\EOx:@1=\E9:@2=\EOw:@3=\EOV:@4=\EOu:\ :@5=\ENd:@6=\EOn:@7=\E0:@8=^M:@9=\EOk:F1@:F2@:F3@:\ :F4@:k9@:k;@:kD=\ENf:kE=\EOa:kI=\ENj:kL=\ENe:kM=\ENj:\ :kN=\E[U:kP=\E[V:tc=att610: att610-103k-w|610-103k-w|610bct-103k-w|AT&T 610; 132 column; 103key keyboard:\ :co#132:ws#132:\ :i1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h:tc=att610-103k: att615|615mt|AT&T 615; 80 column; 98key keyboard:\ :#4=\E[ A:%i=\E[ @:F5=\EOC:F6=\EOD:F7=\EOE:F8=\EOF:\ :F9=\EOG:FA=\EOH:FB=\EOI:FC=\EOJ:FD=\ENO:FE=\ENP:\ :FF=\ENQ:FG=\ENR:FH=\ENS:FI=\ENT:FJ=\EOP:FK=\EOQ:\ :FL=\EOR:FM=\EOS:FN=\EOw:FO=\EOx:FP=\EOy:FQ=\EOm:\ :FR=\EOt:FS=\EOu:FT=\EOv:FU=\EOl:FV=\EOq:FW=\EOr:\ :FX=\EOs:FY=\EOp:FZ=\EOn:Fa=\EOM:tc=att610: att615-w|615-w|615mt-w|AT&T 615; 132 column; 98key keyboard:\ :#4=\E[ A:%i=\E[ @:F5=\EOC:F6=\EOD:F7=\EOE:F8=\EOF:\ :F9=\EOG:FA=\EOH:FB=\EOI:FC=\EOJ:FD=\ENO:FE=\ENP:\ :FF=\ENQ:FG=\ENR:FH=\ENS:FI=\ENT:FJ=\EOP:FK=\EOQ:\ :FL=\EOR:FM=\EOS:FN=\EOw:FO=\EOx:FP=\EOy:FQ=\EOm:\ :FR=\EOt:FS=\EOu:FT=\EOv:FU=\EOl:FV=\EOq:FW=\EOr:\ :FX=\EOs:FY=\EOp:FZ=\EOn:Fa=\EOM:tc=att610-w: att615-103k|615-103k|615mt-103k|AT&T 615; 80 column; 103key keyboard:\ :#4=\E[ A:%i=\E[ @:tc=att610-103k: att615-103k-w|615-103k-w|615mt-103k-w|AT&T 615; 132 column; 103key keyboard:\ :#4=\E[ A:%i=\E[ @:tc=att610-103k-w: att620|620mtg|AT&T 620; 80 column; 98key keyboard:\ :am:es:hs:mi:ms:xn:xo:\ :Nl#8:co#80:it#8:lh#2:li#24:lw#8:ws#80:\ :#4=\E[ A:%i=\E[ @:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:\ :DO=\E[%dB:F1=\ENq:F2=\ENr:F3=\ENs:F4=\ENt:F5=\EOC:\ :F6=\EOD:F7=\EOE:F8=\EOF:F9=\EOG:FA=\EOH:FB=\EOI:\ :FC=\EOJ:FD=\ENO:FE=\ENP:FF=\ENQ:FG=\ENR:FH=\ENS:\ :FI=\ENT:FJ=\EOP:FK=\EOQ:FL=\EOR:FM=\EOS:FN=\EOw:\ :FO=\EOx:FP=\EOy:FQ=\EOm:FR=\EOt:FS=\EOu:FT=\EOv:\ :FU=\EOl:FV=\EOq:FW=\EOr:FX=\EOs:FY=\EOp:FZ=\EOn:\ :Fa=\EOM:IC=\E[%d@:LE=\E[%dD:LF=\E[2p:LO=\E[p:\ :RI=\E[%dC:UP=\E[%dA:\ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ :ae=\E(B\017:al=\E[L:as=\E)0\016:bl=^G:bt=\E[Z:\ :cb=\E[1K:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\ :cr=^M:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=\E[B:\ :ei=\E[4l:fs=\E8:ho=\E[H:\ :i1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h:\ :i2=\E(B\E)0:im=\E[4h:is=\E[0m\017:k1=\EOc:k2=\EOd:\ :k3=\EOe:k4=\EOf:k5=\EOg:k6=\EOh:k7=\EOi:k8=\EOj:\ :k9=\ENo:k;=\ENp:kB=\E[Z:kC=\E[2J:kF=\E[S:kR=\E[T:\ :kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\ :ll=\E[24H:mb=\E[5m:md=\E[1m:me=\E[m\E(B\017:\ :mh=\E[2m:mk=\E[8m:mr=\E[7m:nd=\E[C:nw=\EE:pf=\E[?4i:\ :..pn=\E[%p1%d;0;0;0q%p2%\072-16.16s:po=\E[?5i:\ :..px=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s:\ :r2=\Ec\E[?3l:rc=\E8:\ :..sa=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;:\ :sc=\E7:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:\ :ts=\E7\E[25;%i%p1%dx:ue=\E[m:up=\E[A:us=\E[4m:\ :vb=\E[?5h\E[?5l:ve=\E[?25h\E[?12l:vi=\E[?25l:\ :vs=\E[?12;25h: att620-w|620-w|620mtg-w|AT&T 620; 132 column; 98key keyboard:\ :co#132:ws#132:\ :i1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h:tc=att620: att620-103k|620-103k|620mtg-103k|AT&T 620; 80 column; 103key keyboard:\ :!1=\EOO:!2=\EOP:!3=\EOS:#1=\EOM:%0=\EOt:%1=\EOm:\ :%2=\ENi:%3=\EOl:%4=\ENc:%5=\ENh:%6=\EOv:%7=\EOr:\ :%8=\ENg:%9=\EOz:%a=\EOL:%b=\ENC:%c=\ENH:%d=\EOR:\ :%e=\ENG:%f=\EOZ:%g=\EOT:%h=\EOY:%j=\EOQ:&0=\EOW:\ :&1=\EOb:&2=\ENa:&3=\EOy:&4=\EOB:&5=\EOq:&6=\EOo:\ :&7=\EOp:&8=\EOs:&9=\ENB:*0=\EOX:*1=\EOU:*2=\END:\ :*3=\EON:*4=\ENF:*5=\ENE:*6=\ENI:*7=\ENN:*8=\EOA:\ :*9=\EOK:@0=\EOx:@1=\E9:@2=\EOw:@3=\EOV:@4=\EOu:\ :@5=\ENd:@6=\EOn:@7=\E0:@8=^M:@9=\EOk:F1@:F2@:F3@:\ :F4@:F5@:F6@:F7@:F8@:F9@:FA@:FB@:FC@:FD@:FE@:FF@:FG@:\ :FH@:FI@:FJ@:FK@:FL@:FM@:FN@:FO@:FP@:FQ@:FR@:FS@:FT@:\ :FU@:FV@:FW@:FX@:FY@:FZ@:Fa@:k9@:k;@:kD=\ENf:kE=\EOa:\ :kI=\ENj:kL=\ENe:kM=\ENj:kN=\E[U:kP=\E[V:tc=att620: att620-103k-w|620-103k-w|620mtg-103k-w|AT&T 620; 132 column; 103key keyboard:\ :co#132:ws#132:\ :i1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h:tc=att620-103k: # 630 short descriptions without \E att630|5630|5630DMD|630MTG|AT&T 630 windowing terminal:\ :NP:am:da:db:mi:ms:xo:\ :co#80:it#8:li#60:lm#0:\ :@8=^M:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\ :F1=\ENq:F2=\ENr:F3=\ENs:F4=\ENt:F5=\ENu:F6=\ENv:\ :F7=\ENw:F8=\ENx:F9=\ENy:FA=\ENz:FB=\EN{:FC=\EN|:\ :FD=\EN}:FE=\EN~:IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:\ :SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:al=\E[L:bl=^G:bt=\E[Z:\ :cb=\E[1K:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\ :cr=^M:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:\ :im=\E[4h:is=\E[m:k9=\ENo:k;=\ENp:kA=\E[L:kB=\E[Z:\ :kC=\E[2J:kD=\E[P:kI=\E[@:kL=\E[M:kb=^H:kd=\E[B:\ :kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:me=\E[m:\ :mr=\E[7m:nd=\E[C:nw=^M^J:pf=\E[?4i:po=\E[?5i:\ :..px=\E[%p1%d;%p2%l%dq%p2%s:r2=\Ec:rc=\E8:\ :..sa=\E[0%?%p2%t;4%;%?%p1%p3%|%p4%|%p5%|%t;7%;m:\ :sc=\E7:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:\ :up=\E[A:us=\E[4m: att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines:\ :li#24:\ :tc=att630: # This entry was modified 3/13/90 by JWE. # fixes include additions of enacs, correcting rep, and modification # of kHOM. (See comments below) # has status line of 80 chars # These were commented out: indn=\E[%p1%dS, rin=\E[%p1%dT, # the k25 and up keys are used for shifted system Fkeys # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is # currently the same as khome (unshifted HOME or \E[H). On the 102, 102+1 # and 122 key keyboards, the 730's translation is \E[2J. For consistency # kHOM has been commented out. The user can uncomment kHOM if using the # 102, 102+1, or 122 key keyboards # kHOM=\E[2J, # (untranslatable capabilities removed to fit entry within 1023 bytes) # WARNING: this entry, 1063 bytes long, may core-dump older termcap libraries! att730|730MTG|AT&T 730 windowing terminal Version:\ :NP:am:da:db:es:hs:mi:ms:xn:xo:\ :Nl#24:co#80:it#8:lh#2:li#60:lm#0:lw#8:ws#80:\ :#4=\E[ @:%i=\E[ A:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:\ :DO=\E[%dB:F1=\ENq:F2=\ENr:F3=\ENs:F4=\ENt:F5=\ENu:\ :F6=\ENv:F7=\ENw:F8=\ENx:F9=\ENy:FA=\ENz:FB=\EN{:\ :FC=\EN|:FD=\EN}:FE=\EN~:FF=\EOC:FG=\EOD:FH=\EOE:\ :FI=\EOF:FJ=\EOG:FK=\EOH:FL=\EOI:FM=\EOJ:FN=\ENO:\ :FO=\ENP:FP=\ENQ:FQ=\ENR:FR=\ENS:FS=\ENT:FT=\EOU:\ :FU=\EOV:FV=\EOW:FW=\EOX:FX=\EOY:FY=\EOZ:FZ=\EO[:\ :Fa=\EO :Fb=\EO]:Fc=\EO^:IC=\E[%d@:LE=\E[%dD:\ :LF=\E[?13h:LO=\E[?13l:RI=\E[%dC:RX=\E[?21l:\ :SX=\E[?21h:UP=\E[%dA:ZF=\E#6:\ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ :ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[J:\ :ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\ :cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=\E[B:eA=\E(B\E)0:\ :ei=\E[4l:fs=\E8:ho=\E[H:\ :i1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B:\ :i2=\E(B\E)0:im=\E[4h:is=\E[0m\017:k1=\EOc:k2=\EOd:\ :k3=\EOe:k4=\EOf:k5=\EOg:k6=\EOh:k7=\EOi:k8=\EOj:\ :k9=\ENo:k;=\ENp:kA=\E[L:kB=\E[Z:kC=\E[2J:kF=\E[S:\ :kI=\E[@:kR=\E[T:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:\ :kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m\017:\ :mh=\E[2m:mk=\E[8m:mr=\E[7m:nd=\E[C:nw=\EE:pf=\E[?4i:\ ::po=\E[?5i:ps=\E[?19h\E[0i::r2=\Ec\E[?3l:rc=\E8:::\ :sc=\E7:se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:\ :ts=\E7\E[;%i%p1%dx:ue=\E[24m:up=\E[A:us=\E[4m:\ :vb=\E[?5h\E[?5l:ve=\E[?25h\E[?12l:vi=\E[?25l:\ :vs=\E[?12;25h:: att730-41|730MTG-41|AT&T 730-41 windowing terminal Version:\ :li#41:\ :tc=att730: att730-24|730MTG-24|AT&T 730-24 windowing terminal Version:\ :li#24:\ :tc=att730: att730r|730MTGr|AT&T 730 rev video windowing terminal Version:\ :i1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B:\ :vb=\E[?5l\E[?5h:tc=att730: att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version:\ :li#41:\ :tc=att730r: att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version:\ :li#24:\ :tc=att730r: # 05-Aug-86: # The following Terminfo entry describes functions which are supported by # the AT&T 5430/pt505 terminal software version 2 and later. # # The following represents the screen layout along with the associated # bezel buttons for the 5430/pt505 terminal. The "kf" designations do # not appear on the screen but are shown to reference the bezel buttons. # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate # position relative to the screen. # # # # +----------------------------------------------------------------+ # | | # XXXX | kf0 kf24 | XXXX # | | # | | # XXXX | kf1 kf23 | XXXX # | | # | | # XXXX | kf2 kf22 | XXXX # | | # | | # XXXX | kf3 kf21 | XXXX # | | # | | # XXXX | kf4 kf20 | XXXX # | | # | | # XXXX | kf5 kf19 | XXXX # | | # | | # XXXX | kf6 kf18 | XXXX # | | # | | # XXXX | | XXXX # | | # | | # +----------------------------------------------------------------+ # # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX # # Note: XXXX represents the screen buttons # CMD REDRAW # # MAIL # # Depression of the "CMD" key sends \E! (kcmd) # Depression of the "MAIL" key sends \E[26s (kf26) # "REDRAW" same as "REFRESH" (krfr) # # "kf" functions adds carriage return to output string if terminal is in # 'new line' mode. # # The following are functions not covered in the table above: # # Set keyboard character (SKC): \EPn1;Pn2w # Pn1= 0 Back Space key # Pn1= 1 Break key # Pn2= Program char (hex) # # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t # Pn1= Window number (1-39) # Pn2-Pn5= Y;X;Y;X coordinates # # Screen Selection (SSL): \E[Pnu # Pn= Window number # # Set Terminal Modes (SM): \E[Pnh # Pn= 3 Graphics mode # Pn= > Cursor blink # Pn= < Enter new line mode # Pn= = Enter reverse insert/replace mode # Pn= ? Enter no scroll mode # # Reset Terminal Mode (RM): \E[Pnl # Pn= 3 Exit graphics mode # Pn= > Exit cursor blink # Pn= < Exit new line mode # Pn= = Exit reverse insert/replace mode # Pn= ? Exit no scroll mode # # Screen Status Report (SSR): \E[Pnp # Pn= 0 Request current window number # Pn= 1 Request current window dimensions # # Device Status Report (DSR): \E[6n Request cursor position # # Call Status Report (CSR): \E[Pnv # Pn= 0 Call failed # Pn= 1 Call successful # # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string # Pn1= Button number to be loaded # Pn2= Character count of "string" # Pn3= Key mode being loaded: # 0= Unshifted # 1= Shifted # 2= Control # String= Text string (15 chars max) # # Screen Number Report (SNR): \E[Pnp # Pn= Screen number # # Screen Dimension Report (SDR): \E[Pn1;Pn2r # Pn1= Number of rows available in window # Pn2= Number of columns available in window # # Cursor Position Report (CPR): \E[Pn1;Pn2R # Pn1= "Y" Position of cousor # Pn2= "X" Position of cursor # # Request Answer Back (RAB): \E[c # # Answer Back Response (ABR): \E[?;*;30;VSV # *= 0 No printer available # *= 2 Printer available # V= Software version number # SV= Software sub version number # # Screen Alingment Aid: \En # # Bell (lower pitch): \E[x # # Dial Phone Number: \EPdstring\ # string= Phone number to be dialed # # Set Phone Labels: \EPpstring\ # string= Label for phone buttons # # Set Clock: \EPchour;minute;second\ # # Position Clock: \EPsY;X\ # Y= "Y" coordinate # X= "X" coordinate # # Delete Clock: \Epr\ # # Programming The Function Buttons: \EPfPn;string\ # Pn= Button number (00-06, 18-24) # (kf00-kf06, kf18-kf24) # string= Text to sent on button depression # # Request For Local Directory Data: \EPp12;\ # # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\ # # Request for Local Directory Data in print format: \EPp13;\ # # Enable 'Prt on Line' mode: \022 (DC2) # # Disable 'Prt on Line' mode: \024 (DC4) # att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal:\ :am:xo:\ :co#80:it#8:li#24:\ :&2=\E[27s:@4=\E!:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:\ :DO=\E[%dB:F8=\E[18s:F9=\E[19s:FA=\E[20s:FB=\E[21s:\ :FC=\E[22s:FD=\E[23s:FE=\E24s:FG=\E26s:LE=\E[%dD:\ :RA=\E[11;1j:RI=\E[%dC:SA=\E[11;0j:UP=\E[%dA:\ :ae=\E[10m:al=\E[L:as=\E[11m:bl=^G:cb=\E2K:cd=\E[0J:\ :ce=\E[0K:cl=\E[2J\E[H:cm=\E[%d;%dH:cr=^M:dc=\E[P:\ :dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:\ :i1=\EPr\\E[0u\E[2J\E[0;0H\E[0m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l:\ :im=\E[4h:k0=\E[00s:k1=\E[01s:k2=\E[02s:k3=\E[03s:\ :k4=\E[04s:k5=\E[05s:k6=\E[06s:kb=^H:kd=\E[B:kl=\E[D:\ :kr=\E[C:ku=\E[A:le=\E[D:mb=\E[5m:md=\E[1m:me=\E[0m:\ :mr=\E[7m:nd=\E[C:pf=\E[4i:po=\E[5i:r1=\Ec:rc=\E8:\ :sc=\E7:se=\E[0m:sf=^J:so=\E[1m:ta=^I:ue=\E[0m:\ :up=\E[A:us=\E[4m:ve=\E[>l:vs=\E[>h: # # The following Terminfo entry describes functions which are supported by # the AT&T 5430/pt505 terminal software version 1. # # The following represents the screen layout along with the associated # bezel buttons for the 5430/pt505 terminal. The "kf" designations do # not appear on the screen but are shown to reference the bezel buttons. # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate # position relative to the screen. # # # # +----------------------------------------------------------------+ # | | # XXXX | kf0 kf24 | XXXX # | | # | | # XXXX | kf1 kf23 | XXXX # | | # | | # XXXX | kf2 kf22 | XXXX # | | # | | # XXXX | kf3 kf21 | XXXX # | | # | | # XXXX | kf4 kf20 | XXXX # | | # | | # XXXX | kf5 kf19 | XXXX # | | # | | # XXXX | kf6 kf18 | XXXX # | | # | | # XXXX | | XXXX # | | # | | # +----------------------------------------------------------------+ # # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX # # Note: XXXX represents the screen buttons # CMD REDRAW # # MAIL # # Depression of the "CMD" key sends \E! (kcmd) # Depression of the "MAIL" key sends (note) (kf26) # "REDRAW" same as "REFRESH" (krfr) (note) # # note: The character string sent by key 'kf26' may be user programmable # to send either \E[16s, or \E[26s. # The character string sent by key 'krfr' may be user programmable # to send either \E[17s, or \E[27s. # # "kf" functions adds carriage return to output string if terminal is in # 'new line' mode. # # The following are functions not covered in the table above: # # Set keyboard character (SKC): # # \EPn1;Pn2w # # Pn1= 0 Back Space key # Pn1= 1 Break key # Pn2= Program char (hex) # # Screen Definition (SDF): # # \E[Pn1;Pn2;Pn3;Pn4;Pn5t # # Pn1= Window number (1-39) # Pn2-Pn5= Y;X;Y;X coordinates # # Screen Selection (SSL): # # \E[Pnu # # Pn= Window number # # Set Terminal Modes (SM): # # \E[Pnh # # Pn= 3 Graphics mode # Pn= > Cursor blink # Pn= < Enter new line mode # Pn= = Enter reverse insert/replace mode # Pn= ? Enter no scroll mode # # Reset Terminal Mode (RM): # # \E[Pnl # # Pn= 3 Exit graphics mode # Pn= > Exit cursor blink # Pn= < Exit new line mode # Pn= = Exit reverse insert/replace mode # Pn= ? Exit no scroll mode # # Screen Status Report (SSR): # # \E[Pnp # # Pn= 0 Request current window number # Pn= 1 Request current window dimensions # # Device Status Report (DSR): # # \E[6n Request cursor position # # Call Status Report (CSR): # # \E[Pnv # # Pn= 0 Call failed # Pn= 1 Call successful # # Transparent Button String (TBS): # # \E[Pn1;Pn2;Pn3;{string # # Pn1= Button number to be loaded # Pn2= Character count of "string" # Pn3= Key mode being loaded: # 0= Unshifted # 1= Shifted # 2= Control # String= Text string (15 chars max) # # Screen Number Report (SNR): # # \E[Pnp # # Pn= Screen number # # Screen Dimension Report (SDR): # # \E[Pn1;Pn2r # # Pn1= Number of rows available in window # Pn2= Number of columns available in window # # Cursor Position Report (CPR): # # \E[Pn1;Pn2R # # Pn1= "Y" Position of cousor # Pn2= "X" Position of cursor # # Request Answer Back (RAB): # # \E[c # # Answer Back Response (ABR): # # \E[?;0;30;VSV # # V= Software version number # SV= Software sub version number # # Screen Alignment Aid: # # \En # # Bell (lower pitch): # # \E[x # # Dial Phone Number: # # \EPdstring\ # # string= Phone number to be dialed # # Set Phone Labels: # # \EPpstring\ # # string= Label for phone buttons # # Set Clock: # # \EPchour;minute;second\ # # Position Clock: # # \EPsY;X\ # # Y= "Y" coordinate # X= "X" coordinate # # Delete Clock: # # \Epr\ # # Programming The Function Buttons: # # \EPfPn;string\ # # Pn= Button number (00-06, 18-24) # (kf00-kf06, kf18-kf24) # # string= Text to sent on button depression # # # # 05-Aug-86 # # att505-24|pt505-24|gs5430-24| AT&T PT505 or 5430 GETSET version 1 24 lines:\ :am:xo:\ :co#80:it#8:li#24:\ :&2=\E[27s:@4=\E!:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:\ :DO=\E[%dB:F8=\E[18s:F9=\E[19s:FA=\E[20s:FB=\E[21s:\ :FC=\E[22s:FD=\E[23s:FE=\E24s:FG=\E26s:LE=\E[%dD:\ :RI=\E[%dC:UP=\E[%dA:ae=\E[10m:al=\E[L:as=\E[11m:\ :bl=^G:cb=\E2K:cd=\E[0J:ce=\E[0K:cl=\E[2J\E[H:\ :cm=\E[%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:\ :ho=\E[H:\ :i1=\EPr\\E[0u\E[2J\E[0;0H\E[0m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l:\ :im=\E[4h:k0=\E[00s:k1=\E[01s:k2=\E[02s:k3=\E[03s:\ :k4=\E[04s:k5=\E[05s:k6=\E[06s:kb=^H:kd=\E[B:kl=\E[D:\ :kr=\E[C:ku=\E[A:le=\E[D:mb=\E[5m:md=\E[1m:me=\E[0m:\ :mr=\E[7m:nd=\E[C:r1=\Ec:se=\E[0m:sf=^J:so=\E[1m:\ :ta=^I:ue=\E[0m:up=\E[A:us=\E[4m:ve=\E[>l:vs=\E[>h: att505-22|pt505-22|gs5430-22| AT&T PT505 or 5430 GETSET version 1 22 lines:\ :li#22:\ :tc=att505-24: # # -------------------- TERMINFO FILE CAN BE SPLIT HERE ----------------------- # This cut mark helps make life less painful for people running ncurses tic # on machines with relatively little RAM. The file can be broken in half here # cleanly and compiled in sections -- no `use' references cross this cut # going forward. # #### Ampex (Dialogue) # # Yes, these are the same people who are better-known for making audio- and # videotape. I'm told they are located in Redwood City, CA. # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981 # (ampex80: mapped ":pt:" to default tabs; some capabilities merged in from # SCO's entry -- esr) ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80:\ :am:bs:bw:pt:ul:\ :co#80:li#24:\ :al=\EE:bl=^G:bt=\EI:cd=\Ey:ce=\Et:cl=\E*:\ :cm=\E=%+ %+ :cr=^M:ct=\E3:dc=\EW:dl=\ER:do=^J:ei=:\ :ic=\EQ:im=:is=\EA:le=^H:nd=^L:se=\Ek:sf=^J:so=\Ej:\ :st=\E1:ta=^I:ue=\Em:up=^K:us=\El: # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote: ampex175|ampex d175:\ :am:\ :co#80:li#24:\ :al=\EE:bl=^G:cd=\Ey:ce=\Et:cl=\E+:cm=\E=%+ %+ :\ :cr=^M:dc=\EW:dl=\ER:do=^J:ei=:ho=^^:ic=\EQ:im=:\ :is=\EX\EA\EF:kA=\EE:kD=\EW:kI=\EQ:kL=\ER:kd=^J:\ :kh=^^:kl=^H:kr=^L:ku=^K:le=^H:ll=^^^K:nd=^L:se=\Ek:\ :sf=^J:so=\Ej:te=\EF:ti=\EN:ue=\Em:up=^K:us=\El: # No backspace key in the main QWERTY cluster. Fortunately, it has a # NEWLINE/PAGE key just above RETURN that sends a strange single-character # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS # mode), this key can be used as the erase key; I find I like this. Because # some people and some systems may not, there is another termcap ("ampex175") # that suppresses this little eccentricity by omitting the relevant capability. ampex175-b|ampex d175 using left arrow for erase:\ :kb=^_:tc=ampex175: # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu> # (ampex210: removed obsolete ":kn#10:"; mapped ":pt:" to default tabs -- esr) ampex210|a210|ampex a210:\ :am:bs:hs:pt:xn:\ :co#80:li#24:sg#1:ug#1:\ :al=\EE:bt=\EI:cd=\Ey:ce=\Et:cl=\E*:cm=\E=%+ %+ :\ :dc=\EW:dl=\ER:ei=:fs=\E.2:ho=^^:ic=\EQ:\ :if=/usr/share/tabset/std:im=:\ :is=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En:k0=^A0\r:\ :k1=^A1\r:k2=^A2\r:k3=^A3\r:k4=^A4\r:k5=^A5\r:\ :k6=^A6\r:k7=^A7\r:k8=^A8\r:k9=^A9\r:kd=^V:kh=^^:\ :kl=^H:kr=^L:ku=^K:nd=^L:se=\EG0:so=\EG4:\ :ts=\E.0\Eg\E}\Ef:ue=\EG0:up=^K:us=\EG8:\ :vb=\EU\EX\EU\EX\EU\EX\EU\EX: ampex219|ampex-219|amp219|Ampex with Automargins:\ :hs:xn:\ :co#80:it#8:li#24:\ :bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[;H\E[2J:\ :cm=\E[%i%d;%dH:cr=^M:cs=%i\E[%2;%2r:do=\E[B:ho=\E[H:\ :is=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\ :k0=\E[21~:k1=\E[7~:k2=\E[8~:k3=\E[9~:k4=\E[10~:\ :k5=\E[11~:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\ :kd=\E[B:ke=\E>:kh=\E[H:kl=\E[D:kr=\E[C:ks=\E=:\ :ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:mh=\E[1m:\ :mr=\E[7m:nd=\E[C:se=\E[0m:sf=^J:so=\E[7m:sr=\EM:\ :ta=^I:ue=\E[0m:up=\E[A:us=\E[4m: ampex219w|ampex-219w|amp219w|Ampex 132 cols:\ :co#132:li#24:\ :bl=^G:cr=^M:do=^J:\ :is=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h:sf=^J:\ :vs=\E[?3h:tc=ampex219: ampex232|ampex-232|Ampex Model 232:\ :am:\ :co#80:li#24:sg#1:ug#1:\ :al=5*\EE:bt=\EI:cd=\EY:ce=\ET:cl=\E+:cm=\E=%+ %+ :\ :dc=\EW:dl=5*\ER:do=^V:ei=:ic=\EQ:\ :if=/usr/lib/tabset/ampex:im=:is=\Eg\El:k0=^A@\r:\ :k1=^AA\r:k2=^AB\r:k3=^AC\r:k4=^AD\r:k5=^AE\r:\ :k6=^AF\r:k7=^AG\r:k8=^AH\r:k9=^AI\r:kb=^H:kd=^V:\ :kh=^^:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:se=\EG0:so=\EG4:\ :ta=^I:ue=\EG0:up=^K:us=\EG8:\ :vb=\Eb\200\200\200\200\200\200\200\200\200\200\200\200\200\200\Ed:\ :ve=\E.4:vi=\E.0: ampex232w|Ampex Model 232 / 132 columns:\ :co#132:li#24:\ :if=/usr/lib/tabset/amp-132:is=\E\034Eg\El:tc=ampex232: #### Ann Arbor (aa) # # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs. # Highly modified 6/22 by Mike O'Brien. # split out into several for the various screen sizes by dave-yost@rand # Modifications made 3/82 by Mark Horton # Modified by Tom Quarles at UCB for greater efficiency and more diversity # status line moved to top of screen, :vb: removed 5/82 # Some unknown person at SCO then hacked the init strings to make them more # efficient. # # assumes the following setup: # A menu: 0000 1010 0001 0000 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19 # C menu: 56 66 0 0 9600 0110 1100 # D menu: 0110 1001 1 0 # # Briefly, the settings are for the following modes: # (values are for bit set/clear with * indicating our preference # and the value used to test these termcaps) # Note that many of these settings are irelevent to the termcap # and are just set to the default mode of the terminal as shipped # by the factory. # # A menu: 0000 1010 0001 0000 # Block/underline cursor* # blinking/nonblinking cursor* # key click/no key click* # bell/no bell at column 72* # # key pad is cursor control*/key pad is numeric # return and line feed/return for <cr> key * # repeat after .5 sec*/no repeat # repeat at 25/15 chars per sec. * # # hold data until pause pressed/process data unless pause pressed* # slow scroll/no slow scroll* # Hold in area/don't hold in area* # functions keys have default*/function keys disabled on powerup # # show/don't show position of cursor during page transmit* # unused # unused # unused # # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19 # Baud rate (9600*) # # 2 bits of parity - 00=odd,01=even*,10=space,11=mark # 1 stop bit*/2 stop bits # parity error detection off*/on # # keyboard local/on line* # half/full duplex* # disable/do not disable keyboard after data transmission* # # transmit entire page/stop transmission at cursor* # transfer/do not transfer protected characters* # transmit all characters/transmit only selected characters* # transmit all selected areas/transmit only 1 selected area* # # transmit/do not transmit line seperators to host* # transmit/do not transmit page tab stops tabs to host* # transmit/do not transmit column tab stop tabs to host* # transmit/do not transmit graphics control (underline,inverse..)* # # enable*/disable auto XON/XOFF control # require/do not require receipt of a DC1 from host after each LF* # pause key acts as a meta key/pause key is pause* # unused # # unused # unused # unused # unused # # XON character (17*) # XOFF character (19*) # # C menu: 56 66 0 0 9600 0110 1100 # number of lines to print data on (printer) (56*) # # number of lines on a sheet of paper (printer) (66*) # # left margin (printer) (0*) # # number of pad chars on new line to printer (0*) # # printer baud rate (9600*) # # printer parity: 00=odd,01=even*,10=space,11=mark # printer stop bits: 2*/1 # print/do not print guarded areas* # # new line is: 01=LF,10=CR,11=CRLF* # unused # unused # # D menu: 0110 1001 1 0 # LF is newline/LF is down one line, same column* # wrap to preceeding line if move left from col 1*/don't wrap # wrap to next line if move right from col 80*/don't wrap # backspace is/is not destructive* # # display*/ignore DEL character # display will not/will scroll* # page/column tab stops* # erase everything*/erase unprotected only # # editing extent: 0=display,1=line*,2=field,3=area # # unused # annarbor|4080|ann arbor 4080:\ :am:\ :co#80:li#40:\ :bl=^G:cl=\014:\ :..cm=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%'@'%+%c:\ :cr=^M:ct=^^P^P:do=^J:ho=^K:kb=^^:kd=^J:kh=^K:kl=^H:\ :kr=^_:ku=^N:le=^H:nd=^_:sf=^J:st=^]^P1:ta=^I:up=^N: # If you're using the GNU termcap library, add # :cS=\E[%d;%d;%d;%dp: # to these capabilities. This is the nonstandard GNU termcap scrolling # capability, arguments are: # 1. Total number of lines on the screen. # 2. Number of lines above desired scroll region. # 3. Number of lines below (outside of) desired scroll region. # 4. Total number of lines on the screen, the same as the first parameter. # The generic Ann Arbor entry is the only one that uses this. aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly):\ :5i:am:km:mi:xo:\ :co#80:it#8:\ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\EOK:\ :F2=\EOL:F3=\EOM:F4=\EON:F5=\EOO:F6=\EOP:F7=\EOQ:\ :F8=\EOR:F9=\EOS:FA=\EOT:FB=\EOU:FC=\EOV:FD=\EOW:\ :FE=\EOX:IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\ :al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:ch=\E[%+^AG:\ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:ct=\E[2g:\ :cv=\E[%+^Ad:dc=\E[P:dl=\E[M:do=^K:ei=:ho=\E[H:\ :i1=\E[m\E7\E[H\E9\E8:i2=\E[1Q\E[>20;30l\EP`+x~M\E\\:\ :ic=\E[@:im=:k1=\EOA:k2=\EOB:k3=\EOC:k4=\EOD:k5=\EOE:\ :k6=\EOF:k7=\EOG:k8=\EOH:k9=\EOI:k;=\EOJ:kA=\E[L:\ :kB=\E[Z:kC=\E[J:kD=\E[P:kI=\E[@:kL=\E[M:kM=\E6:\ :kb=^H:kd=\E[B:\ :ke=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\:\ :kh=\E[H:kl=\E[D:kr=\E[C:\ :ks=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\:\ :ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:mk=\E[8m:\ :mm=\E[>52h:mo=\E[>52l:mr=\E[7m:nd=\E[C:pO=\E[%dv:\ :pf=^C:po=\E[v:ps=\E[0i:rc=\E8:\ :..rp=%p1%c\E[%p2%{1}%-%db:\ :..sa=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m:\ :sc=\E7:se=\E[m:sf=^K:so=\E[7m:st=\EH:ta=^I:ue=\E[m:\ :up=\E[A:us=\E[4m: aaa+rv:\ :i1=\E[7m\E7\E[H\E9\E8:mb=\E[5;7m:md=\E[1;7m:\ :me=\E[7m\016:mk=\E[7;8m:mr=\E[m:r1=\E[H\E[7m\E[J:\ :..sa=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m:\ :se=\E[7m:so=\E[m:ue=\E[7m:us=\E[4;7m: # Ambassador with the DEC option, for partial vt100 compatibility. aaa+dec:\ :ac=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz||}}:\ :ae=^N:as=^O:cs=\E[%i%d;%dr:eA=\E(0:\ :..sa=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;: aaa-18|ann arbor ambassador/18 lines:\ :li#18:\ :is=\E7\E[60;0;0;18p\E8:te=\E[60;0;0;18p\E[60;1H\E[K:\ :ti=\E[18;0;0;18p:tc=aaa+unk: aaa-18-rv|ann arbor ambassador/18 lines+reverse video:\ :tc=aaa+rv:tc=aaa-18: aaa-20|ann arbor ambassador/20 lines:\ :li#20:\ :is=\E7\E[60;0;0;20p\E8:te=\E[60;0;0;20p\E[60;1H\E[K:\ :ti=\E[20;0;0;20p:tc=aaa+unk: aaa-22|ann arbor ambassador/22 lines:\ :li#22:\ :is=\E7\E[60;0;0;22p\E8:te=\E[60;0;0;22p\E[60;1H\E[K:\ :ti=\E[22;0;0;22p:tc=aaa+unk: aaa-24|ann arbor ambassador/24 lines:\ :li#24:\ :is=\E7\E[60;0;0;24p\E8:te=\E[60;0;0;24p\E[60;1H\E[K:\ :ti=\E[24;0;0;24p:tc=aaa+unk: aaa-24-rv|ann arbor ambassador/24 lines+reverse video:\ :tc=aaa+rv:tc=aaa-24: aaa-26|ann arbor ambassador/26 lines:\ :li#26:\ :is=\E7\E[60;0;0;26p\E8:te=\E[60;0;0;26p\E[26;1H\E[K:\ :ti=\E[H\E[J\E[26;0;0;26p:tc=aaa+unk: aaa-28|ann arbor ambassador/28 lines:\ :li#28:\ :is=\E7\E[60;0;0;28p\E8:te=\E[60;0;0;28p\E[28;1H\E[K:\ :ti=\E[H\E[J\E[28;0;0;28p:tc=aaa+unk: aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status:\ :es:hs:\ :li#29:\ :ds=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K:\ :fs=\E[>51l:is=\r\n\E[A\E7\E[60;1;0;30p\E8:\ :te=\E[60;1;0;30p\E[29;1H\E[K:\ :ti=\E[H\E[J\E[30;1;0;30p\E[30;1H\E[K:\ :ts=\E[>51h\E[1;%p1%dH\E[2K:tc=aaa+unk: aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status line+reverse video:\ :tc=aaa+rv:tc=aaa-30-s: aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status line+save context:\ :te=\E[60;1;0;30p\E[59;1H\E[K:\ :ti=\E[30;1H\E[K\E[30;1;0;30p:tc=aaa-30-s: aaa-s-rv-ctxt|aaa-30-s-rv-ct|aaa-30-srvctxt|ann arbor ambassador/30 lines; status line; saving context:\ :te=\E[60;1;0;30p\E[59;1H\E[K:\ :ti=\E[30;1H\E[K\E[30;1;0;30p:tc=aaa-30-s-rv: aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines:\ :li#30:\ :is=\E7\E[60;0;0;30p\E8:te=\E[60;0;0;30p\E[30;1H\E[K:\ :ti=\E[H\E[J\E[30;0;0;30p:tc=aaa+unk: aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video:\ :tc=aaa+rv:tc=aaa-30: aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context:\ :te=\E[60;0;0;30p\E[60;1H\E[K:ti=\E[30;0;0;30p:tc=aaa-30: aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines; saving context:\ :te=\E[60;0;0;30p\E[60;1H\E[K:ti=\E[30;0;0;30p:tc=aaa+rv:tc=aaa-30: aaa-36|ann arbor ambassador/36 lines:\ :li#36:\ :is=\E7\E[60;0;0;36p\E8:te=\E[60;0;0;36p\E[36;1H\E[K:\ :ti=\E[H\E[J\E[36;0;0;36p:tc=aaa+unk: aaa-36-rv|ann arbor ambassador/36 lines+reverse video:\ :tc=aaa+rv:tc=aaa-36: aaa-40|ann arbor ambassador/40 lines:\ :li#40:\ :is=\E7\E[60;0;0;40p\E8:te=\E[60;0;0;40p\E[40;1H\E[K:\ :ti=\E[H\E[J\E[40;0;0;40p:tc=aaa+unk: aaa-40-rv|ann arbor ambassador/40 lines+reverse video:\ :tc=aaa+rv:tc=aaa-40: aaa-48|ann arbor ambassador/48 lines:\ :li#48:\ :is=\E7\E[60;0;0;48p\E8:te=\E[60;0;0;48p\E[48;1H\E[K:\ :ti=\E[H\E[J\E[48;0;0;48p:tc=aaa+unk: aaa-48-rv|ann arbor ambassador/48 lines+reverse video:\ :tc=aaa+rv:tc=aaa-48: aaa-60-s|ann arbor ambassador/59 lines plus status line:\ :es:hs:\ :li#59:\ :ds=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K:\ :fs=\E[>51l:is=\r\n\E[A\E7\E[60;1;0;60p\E8:\ :ts=\E[>51h\E[1;%p1%dH\E[2K:tc=aaa+unk: aaa-60-s-rv|ann arbor ambassador/59 lines+status line+reverse video:\ :tc=aaa+rv:tc=aaa-60-s: aaa-60-s-rv-dec|ann arbor ambassador/dec mode+59 lines+status line+rev video:\ :tc=aaa+dec:tc=aaa+rv:tc=aaa-60-s: aaa-60|ann arbor ambassador/60 lines:\ :li#60:\ :is=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8:tc=aaa+unk: aaa-60-rv|ann arbor ambassador/60 lines+reverse video:\ :tc=aaa+rv:tc=aaa-60: aaa-db|ann arbor ambassador 30/destructive backspace:\ :i2=\E[1Q\E[m\E[>20l\E[>30h:le=\E[D:tc=aaa-30: guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols:\ :li#33:\ :i2=\E[>59l:is=\E7\E[255;0;0;33;80;80p\E8\E[J:\ :te=\E[255p\E[255;1H\E[K:ti=\E[33p:vb=\E[>59h\E[>59l:tc=aaa+unk: guru+rv|guru changes for reverse video:\ :i2=\E[>59h:vb=\E[>59l\E[>59h: guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video:\ :tc=guru+rv:tc=guru-33: guru+s|changes for status line:\ :es:hs:\ :ds=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K:fs=\E[>51l:\ :te=\E[255;1p\E[255;1H\E[K:\ :ts=\E[>51h\E[1;%p1%dH\E[2K: guru-nctxt:\ :ti=\E[H\E[J\E[33p\E[255;1H\E[K:tc=guru: guru-s|guru-33-s|ann arbor guru/33 lines w/status line:\ :li#32:\ :is=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J:\ :ti=\E[33;1p\E[255;1H\E[K:tc=guru+s:tc=guru+unk: guru-24:\ :co#80:li#24:\ :is=\E7\E[255;0;0;24;80;80p\E8\E[J:ti=\E[24p:tc=guru+unk: guru-44:\ :co#97:li#44:\ :is=\E7\E[255;0;0;44;97;100p\E8\E[J:ti=\E[44p:tc=guru+unk: guru-44-s|ann arbor guru/44 lines w/status line:\ :li#43:\ :is=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J:\ :ti=\E[44;1p\E[255;1H\E[K:tc=guru+s:tc=guru+unk: guru-76|guru with 76 lines by 89 cols:\ :co#89:li#76:\ :is=\E7\E[255;0;0;76;89;100p\E8\E[J:ti=\E[76p:tc=guru+unk: guru-76-s|ann arbor guru/76 lines w/status line:\ :co#89:li#75:\ :is=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J:\ :ti=\E[76;1p\E[255;1H\E[K:tc=guru+s:tc=guru+unk: guru-76-lp|guru-lp|guru with page bigger than line printer:\ :co#134:li#76:\ :is=\E7\E[255;0;0;76;134;134p\E8\E[J:ti=\E[76p:tc=guru+unk: guru-76-w|guru 76 lines by 178 cols:\ :co#178:li#76:\ :is=\E7\E[255;0;0;76;178;178p\E8\E[J:ti=\E[76p:tc=guru+unk: guru-76-w-s|ann arbor guru/76 lines w/status line:\ :co#178:li#75:\ :is=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J:\ :ti=\E[76;1p\E[255;1H\E[K:tc=guru+s:tc=guru+unk: guru-76-wm|guru 76 lines by 178 cols with 255 cols memory:\ :co#178:li#76:\ :is=\E7\E[255;0;0;76;178;255p\E8\E[J:ti=\E[76p:tc=guru+unk: aaa-rv-unk:\ :Nl#0:lh#0:lw#0:\ :i1=\E[7m\E7\E[H\E9\E8:mb=\E[5;7m:md=\E[1;7m:\ :me=\E[7m:mk=\E[7;8m:mr=\E[m:r1=\E[H\E[7m\E[J:\ :..sa=\E[%?%p1%!%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m:\ :se=\E[7m:so=\E[m:ue=\E[7m:us=\E[4;7m: #### Applied Digital Data Systems (adds) # # ADDS itself is long gone. ADDS was bought by NCR, and the same group made # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for # terminals was merged again. Then AT&T sold the terminal business to # SunRiver. The engineers from Teletype, AT&T terminals, ADDS, # and NCR (who are still there) are at: # # SunRiver Data Systems # 100 Marcus Boulevard # Hauppauge, NY 117883-762 # Vox: (800)-231-5445 # Fax: (516)-342-7378 # # Their voice mail describes the place as "SunRiver (formerly ADDS)". # Regent: lowest common denominator, works on all regents. # (regent: renamed ":bc:" to ":le:" -- esr) regent|Adds Regent Series:\ :am:bs:\ :co#80:li#24:\ :bl=^G:cl=^L:cr=^M:do=^J:ho=\EY :le=^U:ll=^A:nd=^F:\ :sf=^J:up=^Z: # Regent 100 has a bug where if computer sends escape when user is holding # down shift key it gets confused, so we avoid escape. regent100|Adds Regent 100:\ :sg#1:ug#1:\ :bl=^G:cm=\013%+ %B\020%.:k0=^B1\r:k1=^B2\r:k2=^B3\r:\ :k3=^B4\r:k4=^B5\r:k5=^B6\r:k6=^B7\r:k7=^B8\r:l0=F1:\ :l1=F2:l2=F3:l3=F4:l4=F5:l5=F6:l6=F7:l7=F8:se=\E0@:\ :so=\E0P:ue=\E0@:us=\E0`:tc=regent: regent20|Adds Regent 20:\ :bl=^G:cd=\Ek:ce=\EK:cm=\EY%+ %+ :tc=regent: regent25|Adds Regent 25:\ :bl=^G:kd=^J:kh=^A:kl=^U:kr=^F:ku=^Z:tc=regent20: regent40|Adds Regent 40:\ :sg#1:ug#1:\ :al=\EM:bl=^G:dl=\El:k0=^B1\r:k1=^B2\r:k2=^B3\r:\ :k3=^B4\r:k4=^B5\r:k5=^B6\r:k6=^B7\r:k7=^B8\r:l0=F1:\ :l1=F2:l2=F3:l3=F4:l4=F5:l5=F6:l6=F7:l7=F8:se=\E0@:\ :so=\E0P:ue=\E0@:us=\E0`:tc=regent25: regent40+|Adds Regent 40+:\ :is=\EB:tc=regent40: # (regent60: removed obsolete ":ko=dc,im,ei:" -- esr) regent60|regent200|Adds Regent 60:\ :dc=\EE:ei=\EF:im=\EF:is=\EV\EB:kD=\EE:kI=\EF:kM=\EF:\ :se=\ER\E0@\EV:so=\ER\E0P\EV:tc=regent40+: regent60na|regent 60 w/no arrow keys:\ :kd@:kl@:kr@:ku@:tc=regent60: # From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981 # (viewpoint: added kcuf1, kf* and dl1 capabilities -- esr) viewpoint|addsviewpoint|adds viewpoint:\ :am:bs:\ :co#80:li#24:\ :bl=^G:cd=\Ek:ce=\EK:cl=^L:cm=\EY%+ %+ :cr=^M:dl=\El:\ :do=^J:is=\017\E0`:k0=^B1:k2=^B2:k3=^B!:k4=^B":\ :k5=^B#:kd=^J:kh=^A:kl=^U:kr=^F:ku=^Z:le=^H:ll=^A:\ :nd=^F:se=^O:sf=^J:so=^N:ue=^O:up=^Z:us=^N:\ :ve=\017\E0`:vs=\017\E0P: screwpoint|adds viewpoint with ^O bug:\ :am:bs:\ :Nl#0:co#80:lh#0:li#24:lw#0:\ :bl=^G:cd=\Ek:ce=\EK:cl=\014:cm=\EY%+ %+ :cr=^M:\ :dl=\El:do=^J:is=^G:kd=^J:kh=^A:kl=^U:kr=^F:ku=^Z:\ :le=^H:ll=^A:nd=^F:sf=^J:up=^Z: fviewpoint|flaky adds viewpoint with ^O bug:\ :am:bs:\ :co#80:li#24:\ :bl=^G:cd=\Ek:ce=\EK:cl=\014:cm=\EY%+ %+ :cr=^M:\ :dl=\El:do=^J:is=^G:kd=^J:kh=^A:kl=^U:kr=^F:ku=^Z:\ :le=^H:ll=^A:nd=^F:sf=^J:up=^Z: # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92 # The civis/cnorm/sgr/sgr0 strings were added by ESR from specs. # Theory; the 3a+ wants \E0%c to set highlights, where normal=01000000, # underline=01100000, rev=01010000, blink=01000010,dim=01000001, # invis=01000100 and %c is the logical or of desired attributes. # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(. vp3a+|viewpoint3a+|adds viewpoint 3a+:\ :am:bw:\ :co#80:it#8:li#24:\ :cd=\EY:ce=\ET:cl=\E*:cm=\E=%+ %+ :cr=^M:do=^J:ho=^^:\ :kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:me=\E(:\ :nd=^L:nw=^M^J:\ :..sa=\E0%'@'%?%p1%tQ%|%;%?%p2%t%'`'%|%;%?%p3%tP%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%?%p7%tD%|%;%c\E):\ :se=\E(:sf=^J:so=\E0Q\E):ta=^I:up=^K:ve=^X:vi=^W: vp60|viewpoint60|addsviewpoint60|adds viewpoint60:\ :tc=regent40: # # adds viewpoint 90 - from cornell # Note: emacs sends ei occasionally to insure the terminal is out of # insert mode. This unfortunately puts the viewpoint90 IN insert # mode. A hack to get around this is :ic=\EF \EF^U:. (Also, # - :ei=:im=: must be present in the termcap translation.) # - :xs: indicates glitch that attributes stick to location # - :ms: means it's safe to move in standout mode # - :cl=\EG\Ek: clears screen and visual attributes without affecting # the status line # Function key and label capabilities merged in from SCO. vp90|viewpoint90|adds viewpoint 90:\ :bs:bw:ms:xs:\ :co#80:li#24:\ :cd=\Ek:ce=\EK:cl=\EG\Ek:cm=\EY%+ %+ :dc=\EE:dl=\El:\ :do=^J:ei=:ho=\EY :ic=\EF \EF\025:im=:k0=^B1\r:\ :k1=^B2\r:k2=^B3\r:k3=^B4\r:k4=^B5\r:k5=^B6\r:\ :k6=^B7\r:k7=^B8\r:k8=^B9\r:k9=^B\072\r:k;=^B;\r:\ :kb=^H:kd=^J:kh=^A:kl=^U:kr=^F:ku=^Z:l0=F1:l1=F2:\ :l2=F3:l3=F4:l4=F5:l5=F6:l6=F7:l7=F8:l8=F9:l9=F10:\ :la=F11:ll=^A:nd=^F:se=\ER\E0@\EV:sf=^J:\ :so=\ER\E0Q\EV:ta=^I:ue=\ER\E0@\EV:up=^Z:\ :us=\ER\E0`\EV: # Note: if return acts weird on a980, check internal switch #2 # on the top chip on the CONTROL pc board. adds980|a980|adds consul 980:\ :am:bs:\ :co#80:li#24:\ :al=\E\016:bl=^G:cl=\014\013@:cm=\013%+@\E\005%2:\ :cr=^M:dl=\E\017:do=^J:k0=\E0:k1=\E1:k2=\E2:k3=\E3:\ :k4=\E4:k5=\E5:k6=\E6:k7=\E7:k8=\E8:k9=\E9:le=^H:\ :nd=\E^E01:se=^O:sf=^J:so=^Y^^^N: #### C. Itoh Electronics # # As of 1995 these people no longer make terminals (they're still in the # printer business). Their terminals were all clones of the DEC VT series. # They're located in Orange County, CA. # # CIT 80 - vt-52 emulator, the termcap has been modified to remove # the delay times and do an auto tab set rather than the indirect # file used in vt100. cit80|cit-80|citoh 80:\ :am:bs:\ :co#80:li#24:\ :cd=\EJ:ce=\EK:cl=\E[;H\EJ:cm=\E[%i%2;%2H:cr=^M:\ :ff=^L:is=\E>:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:\ :ks=\E[?1h\E=:ku=\EOA:nd=\E[C:sf=^J:up=\E[A: # Alternate cit101 (vt100 em) file used in vt100. # Uses 23 lines so can run citsys (like h19sys). # 24 May 85 (mtxinu!sybase!tim) - removed 2-byte limit on :cm: cursor # coordinates otherwise there is garbling on long lines in # co#132 mode; also added support for multipage memory on the Itoh. # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985 citc|Citoh fast vt100:\ :am:bs:xn:\ :co#80:li#23:\ :al=\E[L:cd=\E[J:ce=\E[K:cl=\E[;H\E[2J:\ :cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:ei=:ic=\E[@:im=:\ :is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g:\ :kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\ :ku=\EOA:nd=\E[C:se=\E[m:so=\E[7m:ue=\E[m:up=\E[A:\ :us=\E[4m:\ :vb=\E[?5h\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\E[?5l:\ :ve=\E[V\E8:vs=\E7\E[U: cita:\ :am:bs:xn:\ :co#80:li#23:\ :cd=\E[J:ce=\E[K:cl=\E[;H\E[2J:cm=\E[%i%d;%dH:\ :is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g:\ :kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\ :ku=\EOA:nd=\E[C:se=\E[m:so=\E[7m:ue=\E[m:up=\E[A:\ :us=\E[4m:\ :vb=\E[?5h\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\E[?5l:\ :ve=\E[V\E8:vs=\E7\E[U: cit101:\ :li#24:\ :vb@:tc=citc: cit101b:\ :li#24:\ :tc=citc: # The CIT-500 was unusual in that it had a portrait-style display. # (cit500: mapped ":pt:" to default tabs -- esr) cit500|cit-500|cit 500:\ :am:bs:pt:xn:\ :co#80:li#40:\ :al=\E[L:cd=50\E[J:ce=3\E[K:cl=50\E[;H\E[2J:\ :cm=5\E[%i%2;%2H:dc=\E[P:dl=\E[M:do=\ED:\ :is=\E(B\E)0\E>\E[?3l\E[?7h\E[?8h:k1=\EOP:k2=\EOQ:\ :k3=\EOR:k4=\EOS:kd=\EOB:ke=\E[?1l\E>:kh=\E[H:\ :kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:nd=2\E[C:\ :se=2\E[m:so=2\E[7m:sr=5\EM:ue=2\E[m:up=2\E[A:\ :us=2\E[4m: citoh|ci8510|8510|c.itoh 8510a:\ :co#80:it#8:\ :is=\E(009\054017\054025\054033\054041\054049\054057\054065\054073.:\ :le@:md=\E!:me=\E"\EY:rp=\ER%r%03%.:sr=\Er:ue=\EY:\ :us=\EX:tc=lpr: citoh-pica|citoh in pica:\ :i1=\EN:tc=citoh: citoh-elite|citoh in elite:\ :co#96:\ :i1=\EE:\ :is=\E(009\054017\054025\054033\054041\054049\054057\054065\054073\054081\054089.:tc=citoh: citoh-comp|citoh in compressed:\ :co#136:\ :i1=\EQ:\ :is=\E(009\054017\054025\054033\054041\054049\054057\054065\054073\054081\054089\054097\054105\054113\054121\054129.:tc=citoh: # citoh has infinite cols because we don't want lp ever inserting \n\t**. citoh-prop|citoh-ps|ips|citoh in proportional spacing mode:\ :co#32767:\ :i1=\EP:tc=citoh: citoh-6lpi|citoh in 6 lines per inch mode:\ :i2=\EA:tc=citoh: citoh-8lpi|citoh in 8 lines per inch mode:\ :li#88:\ :i2=\EB:tc=citoh: #### Control Data (cdc) # cdc456|cdc:\ :am:bs:\ :co#80:li#24:\ :al=\EL:bl=^G:cd=^X:ce=^V:cl=^Y^X:cm=\E1%+ %+ :cr=^M:\ :dl=\EJ:do=^J:ho=^Y:le=^H:nd=^L:sf=^J:up=^Z: cdc456tst:\ :am:bs:\ :co#80:li#24:\ :bl=^G:cl=^Y^X:cm=\E1%+ %+ :cr=^M:do=^J:le=^H:sf=^J: #### Human Designed Systems (Concept) # # Human Designed Systems # 400 Fehley Drive # King of Prussia, PA 19406 # Vox: (610)-277-8300 # Fax: (610)-275-5739 # Net: support@hds.com # # John Martin <john@hds.com> is their termcap expert. They're mostly out of # the character-terminal business now (1995) and making X terminals. In # particular, the whole `Concept' line described here was discontinued long # ago. # From: <vax135!hpk> Sat Jun 27 07:41:20 1981 # Extensive changes to c108 by arpavax:eric Feb 1982 # Some unknown person at SCO then translated it to terminfo. # # There seem to be a number of different versions of the C108 PROMS # (with bug fixes in its Z-80 program). # # The first one that we had would lock out the keyboard of you # sent lots of short lines (like /usr/dict/words) at 9600 baud. # Try that on your C108 and see if it sends a ^S when you type it. # If so, you have an old version of the PROMs. # # You should configure the C108 to send ^S/^Q before running this. # It is much faster (at 9600 baud) than the c100 because the delays # are not fixed. # new status line display entries for c108-8p: # is3 - init str #3 - setup term for status display - # set programmer mode, select window 2, define window at last # line of memory, set bkgnd stat mesg there, select window 0. # # tsl - to status line - select window 2, home cursor, erase to # end-of-window, 1/2 bright on, goto(line#0, col#?) # # fsl - from status line - 1/2 bright off, select window 0 # # dsl - disable status display - set bkgnd status mesg with # illegal window # # # There are probably more function keys that should be added but # I don't know what they are. # c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages:\ :i2=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n:\ :te=\Ev \001\177p\Ep\r\n:tc=c108-4p: c108+acs|alternate charset defns for c108:\ :ac=l\\qLkTxUmMjE:ae=\Ej :as=\Ej!: c108-4p-acs|c108-4p w/ acs:\ :tc=c108+acs:tc=c108-4p: c108-8p-acs|c108-8p w/ acs:\ :tc=c108+acs:tc=c108-8p: c108-rv-8p-acs|c108-rv-8p w/ acs:\ :tc=c108+acs:tc=c108-rv-8p: c108-4p|concept108-4p|concept 108 w/4 pages:\ :es:hs:xo:\ :pb@:\ :..cm=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c:\ :cr=^M:dc=\E 1:ds=\E ;\177:fs=\Ee\E z :i1=\EK\E!\E F:\ :i2=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n:\ :sf=^J:te=\Ev \001 p\Ep\r\n:\ :ti=\EU\Ev 8p\Ep\r\E\025:\ :ts=\E z"\E?\E\005\EE\Ea %+ :ve=\Ew:vs=\EW:tc=c100: c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video:\ :te=\Ev \002 p\Ep\r\n:ti=\EU\Ev 8p\Ep\r:tc=c108-rv-4p: c108-rv-4p|concept108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video:\ :i1=\Ek:se=\Ee:so=\EE:vb=\EK\Ek:tc=c108-4p: c108-rv-4p-acs|c108-rv-4p w/ acs:\ :tc=c108+acs:tc=c108-rv-4p: c108-na|c108-na-8p|c108-8p-na|concept108-na-|concept108na8p|concept 108 w/8 pages no arrows:\ :k7=\E;:k8=\E<:k9=\E=:ke@:ks@:tc=c108-8p: c108-na-acs|c108-na w/ acs:\ :tc=c108+acs:tc=c108-na: c108-rv-na|c108-rv-na-8p|c108-8p-rv-na|concept 108 8 pages no arrows rev video:\ :k7=\E;:k8=\E<:k9=\E=:ke@:ks@:tc=c108-rv-8p: c108-rv-na-acs|c108-na w/ acs:\ :tc=c108+acs:tc=c108-rv-na: c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode:\ :co#132:\ :i1=\E F\E":te=\Ev ^A0\001D\Ep\r\n:\ :ti=\EU\Ev 8\001D\Ep\r:tc=c108-8p: c108-w-acs|c108-w w/ acs:\ :tc=c108+acs:tc=c108-w: # Concept 100: # These have only window relative cursor addressing, not screen # relative. To get it to work right here, smcup/rmcup (which # were invented for the concept) lock you into a one page # window for screen style programs. # # To get out of the one page window, we use a clever trick: # we set the window size to zero ("\Ev " in rmcup) which the # terminal recognizes as an error and resets the window to all # of memory. # # This trick works on c100 but does not on c108, sigh. # # Some tty drivers use cr3 for concept, others use nl3, hence # the delays on cr and ind below. This padding is only needed at # 9600 baud. One or the other is commented out depending on # local conventions. # # 2 ms padding on rmcup isn't always enough. 6 works fine. Maybe # less than 6 but more than 2 will work. # # Note: can't use function keys f7-f10 because they are # indistinguishable from arrow keys (!), also, del char and # clear eol use xon/xoff so they probably won't work very well. # # Also note that we don't define insrt/del char/delline/eop/send # because they don't transmit unless we reset them - I figured # it was a bad idea to clobber their definitions. # # The mc5 sequence changes the escape character to ^^ so that # escapes will be passed through to the printer. Only trouble # is that ^^ won't be - ^^ was chosen to be unlikely. # Unfortunately, if you're sending raster bits through to be # plotted, any character you choose will be likely, so we lose. # # \EQ"\EY(^W (send anything from printer to host, for xon/xoff) # cannot be # in is2 because it will hang a c100 with no printer # if sent twice. c100|concept100|concept|c104|c100-4p|hds concept 100:\ :am:eo:mi:ul:xn:\ :co#80:li#24:pb#9600:vt#8:\ :al=\E\022:bl=^G:cd=\E\005:ce=\E\025:cl=\E?\E\005:\ :cm=\Ea%+ %+ :cr=\r:dc=\E\021:dl=\E\002:do=^J:\ :ei=\E :i1=\EK:i2=\Ev \Ep\n:im=\E^P:ip=:\ :is=\EU\Ef\E7\E5\E8\El\ENH\E\200\Eo&\200\Eo'\E\Eo!\200\E\007!\E\010A@ \E4#\072"\E\072a\E4#;"\E\072b\E4#<"\E\072c:\ :k1=\E5:k2=\E6:k3=\E7:k4=\E8:k5=\E9:k6=\E\072a:\ :k7=\E\072b:k8=\E\072c:kA=\E^R:kB=\E':kD=\E^Q:\ :kE=\E^S:kF=\E[:kI=\E^P:kL=\E^B:kM=\E\200:kN=\E-:\ :kP=\E.:kR=\E\\:kS=\E^C:kT=\E]:kb=^H:kd=\E<:ke=\Ex:\ :kh=\E?:kl=\E>:kr=\E=:ks=\EX:kt=\E_:ku=\E;:le=^H:\ :mb=\EC:me=\EN@:mh=\EE:mk=\EH:mp=\EI:mr=\ED:nd=\E=:\ :pf=\036o \E\EQ!\EYP\027:po=\EQ"\EY(\027\EYD\Eo \036:\ :rp=\Er%.%+ :se=\Ed:sf=^J:so=\ED:ta=\011:\ :te=\Ev \Ep\r\n:ti=\EU\Ev 8p\Ep\r\E\025:ue=\Eg:\ :up=\E;:us=\EG:vb=\Ek\EK: c100-rv|c100-rv-4p|concept100-rv|c100 rev video:\ :i1=\Ek:se=\Ee:so=\EE:vb=\EK\Ek:ve@:vs@:tc=c100: c100-rv-na|c100-rv-4p-na|c100 with no arrows:\ :ke@:ks@:tc=c100-rv: oc100|oconcept|c100-1p|old 1 page concept 100:\ :in:\ :i3@:tc=c100: # ht through el included to specify padding needed in raw mode. avt-ns|concept avt with status lins disabled:\ :am:eo:mi:ul:xn:xo:\ :co#80:it#8:li#24:lm#192:\ :AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:\ :RI=\E[%dC:UP=\E[%dA:ae=\016:al=\E[L:as=\017:bl=^G:\ :bt=\E[Z:cd=\E[J:ce=\E[K:ch=\E[%+^AG:cl=\E[H\E[J:\ :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[2g:\ :cv=\E[%+^Ad:dc=\E[P:dl=\E[M:do=^J:ei=\E4l:ho=\E[H:\ :i1=\E[=103l\E[=205l:ic=\E[@:im=\E1:ip=:\ :is=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\0720\07232!r\E[0*w\E[w\E2\r\n\E[2;27!t:\ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kA=\E^C\r:kD=\E^B\r:\ :kI=\E^A\r:kS=\E^D\r:kb=^H:kd=\E[B:ke=\E[!z\E[0;2u:\ :kh=\E[H:kl=\E[D:kr=\E[C:ks=\E[1!z\E[0;3u:ku=\E[A:\ :le=^H:ll=\E[24H:mb=\E[5m:md=\E[1m:me=\E[m:mh=\E[1!{:\ :mk=\E8m:mp=\E[99m:mr=\E[7m:nd=\E[C:pf=\E[4i:\ :pl=\E[%d;0u#%s#:po=\E[5i:ps=\E[0i:px=\E[%d;1u#%s#:\ :rc=\E8:..rp=%p1%c\E[%p2%{1}%-%db:\ :..sa=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m:\ :sc=\E7:se=\E[7!{:sf=\n:so=\E[7m:sr=\EM:st=\EH:\ :ta=\011:te=\E[w\E2\r\n:ti=\E[=4l\E[1;24w\E2\r:\ :ue=\E[4!{:up=\E[A:us=\E[4m:ve=\E[=119l:vs=\E[=119h: avt-rv-ns|concept avt in reverse video mode/no status line:\ :i1=\E[=103l\E[=205h:vb=\E[=205l\E[=205h:tc=avt-ns: avt-w-ns|concept avt in 132 column mode/no status line:\ :i1=\E[=103h\E[=205l:ti=\E[H\E[1;24;1;132w:tc=avt-ns: avt-w-rv-ns|concept avt in 132 column mode/no status line:\ :i1=\E[=103h\E[=205h:ti=\E[H\E[1;24;1;132w:\ :vb=\E[=205l\E[=205h:tc=avt-ns: # Concept AVT with status line. We get the status line using the # "Background status line" feature of the terminal. We swipe the # first line of memory in window 2 for the status line, keeping # 191 lines of memory and 24 screen lines for regular use. # The first line is used instead of the last so that this works # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this # assumes an 8 page AVT but lm isn't currently used anywhere.) # avt+s|concept avt status line changes:\ :es:hs:\ :lm#191:\ :ds=\E[0*w:fs=\E[1;1!w:\ :i2=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n:\ :te=\E[2w\E2\r\n:ti=\E[2;25w\E2\r:\ :ts=\E[2;1!w\E[;%p1%dH\E[2K: avt|avt-s|concept-avt|avt w/80 columns:\ :tc=avt+s:tc=avt-ns: avt-rv|avt-s-rv|avt-rv-s|concept avt in reverse video w/status line:\ :i1=\E[=103l\E[=205h:vb=\E[=205l\E[=205h:tc=avt+s:tc=avt-ns: avt-w|avt-w-s|concept avt in 132 column mode w/status line:\ :i1=\E[=103h\E[=205l:ti=\E[H\E[1;24;1;132w:tc=avt+s:tc=avt-ns: avt-w-rv|avt-rv-w|avt-w-s-rv|avt-w-rv-s|avt 132 cols w/status line:\ :i1=\E[=103h\E[=205h:ti=\E[H\E[1;24;1;132w:\ :vb=\E[=205l\E[=205h:tc=avt+s:tc=avt-ns: #### Contel Business Systems. # # Contel c300 and c320 terminals. contel300|contel320|c300|Contel Business Systems C-300 or C-320:\ :am:in:xo:\ :co#80:li#24:sg#1:\ :al=\EL:bl=^G:cd=\EJ:ce=\EI:cl=\EK:cm=\EX%+ \EY%+ :\ :cr=^M:ct=\E3:dc=\EO:dl=\EM:do=^J:ei=:ho=\EH:ic=\EN:\ :im=:ip=:k0=\ERJ:k1=\ERA:k2=\ERB:k3=\ERC:k4=\ERD:\ :k5=\ERE:k6=\ERF:k7=\ERG:k8=\ERH:k9=\ERI:kb=^H:le=^H:\ :ll=\EH\EA:nd=\EC:se=\E!\200:sf=^J:so=\E!\r:st=\E1:\ :up=\EA:vb=\020\002\020\003: # Contel c301 and c321 terminals. contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321:\ :am:in:xo:\ :co#80:li#24:sg#1:\ :al=\EL:bl=^G:cd=\EJ:ce=\EI:cl=\EK:cm=\EX%+ \EY%+ :\ :cr=^M:ct=\E3:dc=\EO:dl=\EM:do=^J:ho=\EH:k0=\ERJ:\ :k1=\ERA:k2=\ERB:k3=\ERC:k4=\ERD:k5=\ERE:k6=\ERF:\ :k7=\ERG:k8=\ERH:k9=\ERI:kb=^H:le=^H:ll=\EH\EA:\ :nd=\EC:se=\E!\200:sf=^J:so=\E!\r:st=\E1:up=\EA: #### Data General (dg) # # According to James Carlson <carlson@xylogics.com> writing in January 1995, # the terminals group at Data General was shut down in 1991; all these # terminals have thus been discontinued. # dg200|data general dasher 200:\ :NL:am:bw:\ :co#80:li#24:\ :bl=^G:ce=^K:cl=^L:cm=\020%r%.%.:cr=^M:do=^Z:ho=^H:\ :k0=^^z:k1=^^q:k2=^^r:k3=^^s:k4=^^t:k5=^^u:k6=^^v:\ :k7=^^w:k8=^^x:k9=^^y:kd=^Z:kh=^H:kl=^Y:kr=^X:ku=^W:\ :l0=f10:le=^Y:nd=^X:nw=^J:se=^^E:sf=^J:so=^^D:ue=^U:\ :up=^W:us=^T: # # dg450 and dg200 from cornell dg450|dg6134|data general 6134:\ :bs@:\ :nd=^X:tc=dg200: # Note: lesser Dasher terminals will not work with vi because vi insists upon # having a command to move straight down from any position on the bottom line # and scroll the screen up, or a direct vertical scroll command. The 460 and # above have both, the D210/211, for instance, has neither. We must use ANSI # mode rather than DG mode because standard UNIX tty drivers assume that ^H is # backspace on all terminals. This is not so in DG mode. # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the # grounds that there is no matching ":ml:"; mapped ":pt:" to default tabs; # fixed garbled ":k9=\E[00\:z:" capability -- esr) dg460-ansi|Data General Dasher 460, ANSI-mode:\ :am:bs:ms:pt:ul:\ :co#80:li#24:\ :al=\E[L:cd=\E[J:ce=\E[K:cl=\E[2J:cm=\E[%i%2;%2H:\ :dc=\E[P:dl=\E[M:do=\E[B:ei=:ho=\E[H:ic=\E[@:im=:\ :is=^^F@:k0=\E[001z:k1=\E[002z:k2=\E[003z:k3=\E[004z:\ :k4=\E[005z:k5=\E[006z:k6=\E[007z:k7=\E[008z:\ :k8=\E[009z:k9=\E[010z:kb=\E[D:kd=\E[B:kh=\E[H:\ :kl=\E[D:kr=\E[C:ku=\E[A:l0=f1:l1=f2:l2=f3:l3=f4:\ :l4=f5:l5=f6:l6=f7:l7=f8:l9=f10:le=^H:mb=\E[5m:\ :me=\E[0m:mh=\E[2m:mr=\E[7m:nd=\E[C:nl=\ED:se=\E[0m:\ :sf=\E[S:so=\E[7m:sr=\E[T:ue=\E[05:up=\E[A:us=\E[4m: # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> # Data General 605x # Ought to work for a Model 6242, Type D210 as well as a 605x. # Note that the cursor-down key transmits ^Z. Job control users, beware! dg6053|data general 6053:\ :am:bs:bw:pt:ul:\ :co#80:li#24:\ :bl=^G:ce=^K:cl=^L:cm=\020%r%.%.:cr=^M:do=^Z:ho=^H:\ :is=^R:k0=^^q:k1=^^r:k2=^^s:k3=^^t:k4=^^u:k5=^^v:\ :k6=^^w:k7=^^x:k8=^^y:kb=^Y:kd=^Z:kh=^H:kl=^Y:kr=^X:\ :ku=^W:le=^Y:nd=^X:nw=^M^Z:se=\200^^E:\ :so=\200\200\200\200\200\036D:ta=^I:te=^L:ti=^L^R:\ :ue=^U:up=^W:us=^T:ve=^L:vs=^L^R: # From: Peter N. Wan <ihnp4!gatech!gacsr!wan> # courtesy of Carlos Rucalde of Vantage Software, Inc. dgd211|Data General d211:\ :am:bw:\ :co#80:li#24:\ :ce=^K:cl=^L:..cm=\020%r%.%.:cr=^M:do=^Z:ho=^H:kb=^Y:\ :kd=^Z:kh=^H:kl=^Y:kr=^X:ku=^W:le=^Y:nd=^X:nw=^M^Z:\ :se=00\036E\200/>:so=00\036D\200\200\200\200\200/>:\ :ta=^I:te=^L:ti=^L^R:ue=^U:up=^W:us=^T:ve=^L:vs=^L^R: # From: Joan Walter <joanw@BRL.ARPA> # Data General/One # David Holub got the dg1 to work with jove with this termcap # by making li#23 and co#78 to comply with obvious terminal # capabilities. Still waiting for documentation. # Data General/One from modified DG Dasher DG210/211 (bw removed) # From: Peter N. Wan <ihnp4!gatech!gacsr!wan> # courtesy of Carlos Rucalde of Vantage Software, Inc. dg1|Data General/One:\ :am:\ :co#78:li#23:\ :ce=^K:cl=^L:cm=\020%r%.%.:cr=^M:do=^Z:ho=^H:kb=^Y:\ :kd=^Z:kh=^H:kl=^Y:kr=^X:ku=^W:le=^Y:nd=^X:nw=^M^Z:\ :ta=^I:up=^W: #### Datamedia (dm) # cs10|colorscan|Datamedia Color Scan 10:\ :ms:\ :co#80:li#24:\ :bl=^G:cd=\E[J:ce=\E[K:cl=\E[;H\E[J:cm=\E[%i%02;%02H:\ :cr=^M:do=^J:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kd=\E[B:\ :kl=\E[D:kr=\E[C:ku=\E[A:le=^H:nd=\E[C:se=\E[m:sf=^J:\ :so=\E[7m:ue=\E[m:up=\E[A:us=\E[4m: cs10-w|Datamedia Color Scan 10 with 132 columns:\ :co#132:\ :cm=\E[%i%02;%03H:tc=cs10: # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:"; # mapped ":pt:" to default tabs -- esr) dm1520|dm1521|datamedia 1520:\ :am:bs:pt:xn:\ :co#80:li#24:\ :bl=^G:cd=^K:ce=^]:cl=^L:cm=\036%r%+ %+ :cr=^M:do=^J:\ :ho=^Y:kd=^J:kh=^Y:kl=^H:kr=^\:ku=^_:le=^H:nd=^\:\ :sf=^J:ta=^I:up=^_: dm2500|datamedia2500|datamedia 2500:\ :bs:nc:\ :co#80:li#24:\ :al=\020\n\030\035\030\035:bl=^G:ce=^W:cl=^^^^\177:\ :cm=\014%r%n%.%.:dc=\020\010\030\035:\ :dl=\020\032\030\035:dm=^P:do=^J:ed=^X^]:\ :ei=\377\377\030\035:ho=^B:ic=\020\034\030\035:im=^P:\ :le=^H:nd=^\:pc=\377:se=^X^]:sf=^J:so=^N:up=^Z: # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82) # also, has a meta-key (:km:) # From: <goldberger@su-csli.arpa> # (dmchat: ":MT:" changed to ":km:" -- esr) dmchat|dmchat version of datamedia 2500:\ :km:\ :al=1*\020\n\030\035\030\035:dl=2\020\032\030\035:tc=dm2500: # (dm3025: ":MT:" changed to ":km:"; mapped ":pt:" to default tabs -- esr) dm3025|datamedia 3025a:\ :bs:km:pt:\ :co#80:li#24:\ :al=\EP\n\EQ:bl=^G:cd=\EJ:ce=\EK:cl=\EM:\ :cm=\EY%r%+ %+ :cr=^M:dc=\010:dl=\EP\EA\EQ:dm=\EP:\ :do=^J:ed=\EQ:ei=\EQ:ho=\EH:im=\EP:ip=:is=\EQ\EU\EV:\ :le=^H:nd=\EC:se=\EO0:sf=^J:so=\EO1:ta=^I:up=\EA: # (dm3045: mapped ":pt:" to default tabs -- esr) dm3045|datamedia 3045a:\ :am:bs:eo:pt:ul:xn:\ :co#80:li#24:\ :bl=^G:cd=\EJ:ce=\EK:cl=\EM:cm=\EY%r%+ %+ :cr=^M:\ :dc=\EB:do=^J:ei=\EP:ho=\EH:im=\EP:ip=:is=\EU\EV:\ :k0=\Ey\r:k1=\Ep\r:k2=\Eq\r:k3=\Er\r:k4=\Es\r:\ :k5=\Et\r:k6=\Eu\r:k7=\Ev\r:k8=\Ew\r:k9=\Ex\r:kh=\EH:\ :kr=\EC:ku=\EA:le=^H:nd=\EC:pc=\177:sf=^J:ta=^I:\ :up=\EA: # dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding. dm80|dmdt80|dt80|datamedia dt80/1:\ :cd=\E[J:ce=\E[K:cl=\E[2J\E[H:cm=%i\E[%d;%dH:do=^J:\ :ho=\E[H:nd=\E[C:pf=\E[4i:po=\E[5i:ps=\E[0i:se=\E[m:\ :so=\E[7m:sr=\EM:ue=\E[m:up=\E[A:us=\E[4m:tc=vt100: # except in 132 column mode, where it needs a little padding. # This is still less padding than the vt100, and you can always turn on # the ^S/^Q handshaking, so you can use vt100 flavors for things like # reverse video. dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode:\ :co#132:\ :cd=20\E[0J:ce=20\E[0K:cl=50\E[H\E[2J:\ :cm=5\E[%i%d;%dH:do=^J:up=5\E[A:tc=dm80: #### Falco # # Falco Data Products # 440 Potrero Avenue # Sunnyvale, CA 940864-196 # Vox: (800)-325-2648 # Fax: (408)-745-7860 # Net: techsup@charm.sys.falco.com # # Current Falco models as of 1995 are generally ANSI-compatible and support # emulations of DEC VT-series, Wyse, and Televideo types. # Test version for Falco ts-1. See "arpavax.hickman@ucb" for info # (falco: mapped ":pt:" to default tabs -- esr) # This terminal was released around 1983 and was discontinued long ago. falco|ts1|ts-1|falco ts-1:\ :am:bs:pt:\ :co#80:li#24:\ :al=\EE:bl=^G:cd=\EY:ce=\ET\EG0\010:cl=\E*:\ :cm=\E=%+ %+ :cr=^M:dc=\EW:dl=\ER:do=^J:ei=\Er:ho=^^:\ :im=\Eq:is=\Eu\E3:k0=^A0\r:kd=^J:kl=^H:kr=^L:ku=^K:\ :le=^H:nd=^L:se=\Eg0:sf=^J:so=\Eg1:ta=^I:ue=\Eg0:\ :up=^K:us=\Eg1: # (falco-p: mapped ":pt:" to default tabs -- esr) falco-p|ts1p|ts-1p|falco ts-1 with paging option:\ :am:bs:da:db:mi:ms:pt:ul:\ :co#80:li#24:\ :al=\EE:bl=^G:bt=\EI:cd=\EY:ce=\ET\EG0\010\Eg0:\ :cl=\E*:cm=\E=%+ %+ :cr=^M:dc=\EW:dl=\ER:do=\E[B:\ :ei=\Er:im=\Eq:is=\EZ\E3\E_c:kd=\E[B:kh=\E[H:kl=\E[D:\ :kr=\E[C:ku=\E[A:le=^H:nd=\E[C:se=\Eg0:sf=^J:so=\Eg4:\ :ta=^I:te=\E_b:ti=\E_d:ue=\Eg0:up=\E[A:us=\Eg1: ts100|ts100-sp|falco ts100-sp:\ :am:mi:ms:xn:xo:\ :co#80:it#8:li#24:vt#3:\ :@8=\EOM:DO=\E[%dB:K1=\EOq:K2=\EOr:K3=\EOs:K4=\EOp:\ :K5=\EOn:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ :ae=^O:al=\E~E:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\ :ct=\E[3g:dc=\E~W:dl=\E~R:do=^J:eA=\E(B\E)0:ei=:\ :ho=\E[H:i1=\E~)\E~ea:ic=\E~Q:im=:k0=\EOy:k1=\EOP:\ :k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOt:k6=\EOu:k7=\EOv:\ :k8=\EOl:k9=\EOw:k;=\EOx:kb=^H:kd=\EOB:ke=\E[?1l\E>:\ :kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:\ :md=\E[1m:me=\E[m\017:mr=\E[7m:nd=\E[C:\ :r2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:\ :..sa=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;:\ :sc=\E7:se=\E[m:sf=^J:so=\E[1;7m:sr=\EM:st=\EH:ta=^I:\ :ue=\E[m:up=\E[A:us=\E[4m: ts100-ctxt|falco ts-100 saving context:\ :te=\E~_b:ti=\E~_d\E[2J:tc=ts100: #### Florida Computer Graphics # # Florida Computer Graphics Beacon System, using terminal emulator # program "host.com", as provided by FCG. Entry provided by # David Bryant (cbosg!djb) 1/7/83. # This description is for an early release of the "host" program. # Known bug: ed clears the whole screen, so it's commented out. # beacon|FCG Beacon System:\ :am:da:db:\ :co#80:li#32:\ :al=\EE:bl=\ESTART\r\E37\r\EEND\r:ce=\ET:cl=\EZ:\ :cm=\E=%+ %+ :cr=^M:dc=\EW:dl=\ER:do=^J:ei=:ho=\EH:\ :ic=\EQ:im=:le=^H:mb=\ESTART\r\E61\0541\r\EEND\r:\ :me=\ESTART\r\E78\r\E70\0540\r\EEND\r:\ :mr=\ESTART\r\E59\0541\r\EEND\r:nd=\EV:\ :se=\ESTART\r\E70\0540\r\EEND\r:sf=^J:\ :so=\ESTART\r\E70\0546\r\EEND\r:\ :ti=\ESTART\r\E2\0540\r\E12\r\EEND\r:\ :ue=\ESTART\r\E60\0540\r\EEND\r:up=\EU:\ :us=\ESTART\r\E60\0541\r\EEND\r: #### Fluke # # The 1720a differences from ANSI: no auto margin, destructive # tabs, # of lines, funny highlighting and underlining f1720|f1720a|fluke 1720A:\ :xt:\ :co#80:li#16:sg#1:ug#1:\ :bl=^G:cd=\E[J:ce=\E[K:cl=\E[;H\E[2J:cm=\E[%i%d;%dH:\ :cr=^M:do=\E[B:is=\E[;H\E[2J:kd=^]:kl=^_:kr=^^:ku=^\:\ :le=^H:nd=\E[C:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:\ :ue=\E[m:up=\E[A:us=\E[4m: #### Liberty Electronics (Freedom) # # Liberty Electronics # 48089 Fremont Blvd # Fremont CA 94538 # Vox: (510)-623-6000 # Fax: (510)-623-7021 # From: <faletti@berkeley.edu> f100|freedom|freedom100|freedom model 100:\ :am:bw:hs:mi:ms:xo:\ :co#80:li#24:\ :ae=\E$:al=\EE:as=\E%:bl=^G:bt=\EI:cd=\EY:ce=\ET:\ :ch=\E]%+ :cl=^Z:cm=\E=%+ %+ :cr=^M:ct=\E3:cv=\E[%+ :\ :dc=\EW:dl=\ER:do=^J:ds=\Eg\Ef\r:ei=\Er:fs=^M:ho=^^:\ :im=\Eq:ip=:is=\Eg\Ef\r\Ed:k1=^A@\r:k2=^AA\r:\ :k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:\ :k8=^AG\r:k9=^AH\r:k;=^AI\r:kB=\EI:kb=^H:kd=^V:kh=^^:\ :kl=^H:kr=^L:ku=^K:le=^H:nd=^L:se=\EG0:sf=^J:so=\EG4:\ :sr=\Ej:st=\E1:ta=^I:ts=\Eg\Ef:ue=\EG0:up=^K:us=\EG8:\ :vb=\Eb\Ed: f100-rv|freedom-rv|freedom 100 in reverse video:\ :is=\Eg\Ef\r\Eb:vb=\Ed\Eb:tc=f100: # The f110 and f200 have problems with vi(1). They use the ^V # code for the down cursor key. When kcud1 is defined in terminfo # as ^V, the Control Character Quoting capability (^V in insert mode) # is lost! It cannot be remapped in vi because it is necessary to enter # a ^V to to quote the ^V that is being remapped!!! # # f110 users will have to decide whether # to lose the down cursor key or the quoting capability. We will opt # initially for leaving the quoting capability out, since use of VI # is not generally applicable to most interactive applications # # The same applies to f200 users, except that another option exists. # This option has been chosen locally. It will not be distributed unless # a user runs into this problem and requests assistance. Very few users, # if any, should run into this problem. The local solution is in # vifix.local.ti. The f200 has the ability to reprogram the down cursor # key. The key is reprogrammed to ^J (linefeed). This value is remembered # in non-volatile RAM, so powering the terminal off and on will not cause # the change to be lost. The terminfo definition for the f200 is changed # to identify kcud1 as ^J instead of ^V. f110|freedom110|Liberty Freedom 110:\ :am:es:hs:mi:ms:xo:\ :co#80:it#8:li#24:ws#80:\ :ae=\E%%:al=\EE:as=\E$:bl=^G:bt=\EI:cd=\EY:ce=\ET:\ :ch=\E]%+ :cl=^Z:cm=\E=%+ %+ :cr=^M:ct=\E3:cv=\E[%+ :\ :dc=\EW:dl=\ER:do=^V:ds=\Ef\r:ei=\Er\EO:fs=^M:ho=^^:\ :k0=^AI\r:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:\ :k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:kA=\EE:\ :kC=^^:kD=\EW:kE=\ET:kI=\EQ:kL=\ER:kS=\EY:kb=^H:\ :kd=^V:kl=^H:kr=^L:ku=^K:le=^H:mb=\EG2:md=\EG0:\ :me=\EG0:mh=\EG@:mk=\EG1:mr=\EG4:nd=^L:pf=\Ea:po=\E`:\ :se=\EG0:sf=^J:so=\EG<:sr=\EJ\nsmir=\EO\Eq:st=\E1:\ :ts=\Ef:ue=\EG0:up=^K:us=\EG8:\ :vb=\Eb\200\200\200\200\Ed:ve=\E.2:vi=\E.1:vs=\E.2: f110-14|Liberty Freedom 110 14inch:\ :dc@:tc=f110: f110-w|Liberty Freedom 110 - 132 cols:\ :co#132:\ :tc=f110: f110-14w|Liberty Freedom 110 14in/132 cols:\ :co#132:\ :dc@:tc=f110: f200|freedom200|Liberty Freedom 200:\ :am:es:hs:mi:ms:xo:\ :co#80:it#8:li#24:ws#80:\ :ae=\E%%:al=\EE:as=\E$:bl=^G:bt=\EI:cd=\EY:ce=\ET:\ :ch=\E]%+ :cl=^Z:cm=\E=%+ %+ :cr=^M:cs=\Em0%+ %+ :\ :ct=\E3:cv=\E[%+ :dc=\EW:dl=\ER:do=^V:ds=\Ef\r:\ :ei=\Er:fs=^M:ho=^^:im=\Eq:k0=^AI\r:k1=^A@\r:\ :k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\ :k7=^AF\r:k8=^AG\r:k9=^AH\r:kA=\EE:kC=^^:kD=\EW:\ :kE=\ET:kI=\EQ:kL=\ER:kS=\EY:kb=^H:kd=^V:kl=^H:kr=^L:\ :ku=^K:le=^H:mb=\EG2:md=\EG0:me=\EG0:mh=\EG@:mk=\EG1:\ :mr=\EG4:nd=^L:pf=\Ea:po=\E`:se=\EG0:sf=^J:so=\EG<:\ :sr=\EJ:st=\E1:ts=\Ef:ue=\EG0:up=^K:us=\EG8:\ :vb=\Eo\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\En:\ :ve=\E.1:vi=\E.0:vs=\E.1: f200-w|Liberty Freedom 200 - 132 cols:\ :co#132:\ :tc=f200: f200vi|Liberty Freedom 200 for vi:\ :am:es:hs:mi:ms:xo:\ :co#80:it#8:li#24:ws#80:\ :ae=\E%%:al=\EE:as=\E$:bl=^G:bt=\EI:cd=\EY:ce=\ET:\ :ch=\E]%+ :cl=^Z:cm=\E=%+ %+ :cr=^M:cs=\Em0%+ %+ :\ :ct=\E3:cv=\E[%+ :dc=\EW:dl=\ER:do=^V:ds=\Ef\r:\ :ei=\Er:fs=^M:ho=^^:im=\Eq:k0=^AI\r:k1=^A@\r:\ :k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\ :k7=^AF\r:k8=^AG\r:k9=^AH\r:kA=\EE:kC=^^:kD=\EW:\ :kE=\ET:kI=\EQ:kL=\ER:kS=\EY:kb=^H:kd=^J:kl=^H:kr=^L:\ :ku=^K:le=^H:mb=\EG2:md=\EG0:me=\EG0:mh=\EG@:mk=\EG1:\ :mr=\EG4:nd=^L:pf=\Ea:po=\E`:se=\EG0:sf=^J:so=\EG<:\ :sr=\EJ:st=\E1:ts=\Ef:ue=\EG0:up=^K:us=\EG8:\ :vb=\Eb\200\200\200\200\Ed:ve=\E.1:vi=\E.0:vs=\E.1: f200vi-w|Liberty Freedom 200 - 132 cols for vi:\ :co#132:\ :tc=f200vi: #### GraphOn (go) # # Graphon Corporation # 544 Division Street # Campbell, CA 95008 # Vox: (408)-370-4080 # Fax: (408)-370-5047 # Net: troy@graphon.com (Troy Morrison) # # # The go140 and go225 have been discontinued. GraphOn now makes X terminals, # including one odd hybrid that starts out life on power-up as a character # terminal, than can be switched to X graphics mode (driven over the serial # line) by an escape sequence. No info on this beast yet. # (go140: mapped ":pt:" to default tabs -- esr) go140|graphon go-140:\ :bs:pt:\ :co#80:li#24:\ :al=\E[L:cd=10\E[J:ce=\E[K:cl=10\E[;H\E[2J:\ :cm=\E[%i%2;%2H:dc=\E[P:dl=\E[M:ei=\E[4l:\ :if=/usr/share/tabset/vt100:im=\E[4h:\ :is=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q:\ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kd=\EOB:\ :ke=\E[?1l\E>:kh=\E[H:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\ :ku=\EOA:nd=\E[C:se=\E[m:so=\E[7m:sr=\EM:ue=\E[m:\ :up=\E[A:us=\E[4m: go140w|graphon go-140 in 132 column mode:\ :co#132:\ :is=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q:tc=go140: # Hacked up vt200 termcap to handle GO-225/VT220 # From: <edm@nwnexus.WA.COM> # (go225: mapped ":pt:" to default tabs -- esr) go225|go-225|Graphon 225:\ :am:bs:mi:pt:xn:\ :co#80:li#25:vt#3:\ :al=\E[L:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\ :cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:\ :ho=\E[H:im=\E[4h:\ :is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:k1=\EOP:\ :k2=\EOQ:k3=\EOR:k4=\EOS:kb=^H:kd=\E[B:ke=\E>:\ :kh=\E[H:kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:le=^H:\ :mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:rc=\E8:\ :rf=/usr/share/tabset/vt100:rs=\E[!p\E[?7h\E[2;1;1#w:\ :sc=\E7:se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:\ :te=\E[!p\E[?7h\E[2;1;1#w:ti=\E[2;0#w\E[1;25r:\ :ue=\E[24m:up=\E[A:us=\E[4m: #### Harris (Beehive) # # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine. # Their terminal group is ancient history now (1995) though the parent # company is still in business. # # Beehive documentation is undated and marked Preliminary and has no figures # so we must have early Superbee2 (Model 600, according to phone conversation # with mfr.). It has proved reliable except for some missing padding # (notably after \EK and nl at bottom of screen). # # The key idea is that AEP mode is poison for cup & that US's in # the local memory should be avoided like the plague. That means # that the 2048 character local buffer is used as 25 lines of 80 # characters, period. No scrolling local memory, folks. It also # appears that we cannot use naked INS LINE feature since it uses # US. The sbi fakes il1 with an 80-space insert that may be too # slow at low speeds; also spaces get converted to \040 which is # too long for some programs (not vi). DEL LINE is ok but slow. # # The nl string is designed for last line of screen ONLY; cup to # 25th line corrects the motion inherent in scrolling to Page 1. # # There is one understood bug. It is that the screen appears to # pop to a new (blank) page after a nel, or leave a half-line # elipsis to a quad that is the extra 48 memory locations. The # data received is dumped into memory but not displayed. Not to # worry if cup is being used; the lines not displayed will be, # whenever the cursor is moved up there. Since cup is addressed # relative to MEMORY of window, nothing is lost; but beware of # relative cursor motion (cuu1,cud1,cuf1,cub1). Recommended, therefore, # is setenv MORE -c . # # WARNING: Not all features tested. # # Timings are assembled from 3 sources. Some timings may reflect # SB2/Model 300 that were used if more conservative. # Tested on a Model 600 at 1200 and 9600 bd. # # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly # placed on the keyboard and useless because of AEP, is made # into a backspace key. In use ESC must be pressed twice (to send) # and sending ^C must be prefixed by ESC to avoid that wierd # transmit mode associated with ENTER key. # # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across # the screen, then it has dropped into ENTER mode; hit # RESET--ONLINE--!tset. # # As delivered this machine has a FATAL feature that will throw # it into that strange transmit state (SPOW) if the space bar is # hit after a CR is received, but before receiving a LF (or a # few others). # # The circuits MUST be modified to eliminate the SPOW latch. # This is done by strapping on chip A46 of the I/O board; cut # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that # chip. This mod has been checked out on a Mod 600 of Superbee II. # With this modification absurdly high timings on cr are # unnecessary. # # NOTE WELL that the rear panel switch should be set to CR/LF, # not AEP! # sb1|beehive superbee:\ :am:bw:da:db:mi:ul:xb:\ :co#80:li#25:sg#1:ug#1:\ :al=\EN\EL\EQ \EP \EO\ER\EA:\ :bl=^G:bt=\E`:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EF%r%03%03:\ :cr=\r:ct=\E3:dc=\EP:dl=\EM:do=^J:ei=\ER:ho=\EH:\ :im=\EQ\EO:is=\EE\EX\EZ\EO\Eb\Eg\ER:k0=\E2:k1=\Ep:\ :k2=\Eq:k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:\ :k9=\E1:kE=\EK:kI=\EQ\EO:kL=\EM:kM=\ER:kS=\EJ:kb=^_:\ :kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:l0=TAB CLEAR:\ :l9=TAB SET:le=^H:nd=\EC:se=\E_3:sf=^J:so=\E_1:\ :st=\E1:ta=^I:ti=\EO:ue=\E_3:up=\EA:us=\E_0: sbi|superbee|beehive superbee at Indiana U.:\ :xb:\ :al=1\EN\EL\EQ \EP \EO\ER\EA:cr=\r:tc=sb1: # Alternate (older) description of Superbee - f1=escape, f2=^C. # Note: there are at least 3 kinds of superbees in the world. The sb1 # holds onto escapes and botches ^C's. The sb2 is the best of the 3. # The sb3 puts garbage on the bottom of the screen when you scroll with # the switch in the back set to CRLF instead of AEP. This description # is tested on the sb2 but should work on all with either switch setting. # The f1/f2 business is for the sb1 and the xsb can be taken out for # the other two if you want to try to hit that tiny escape key. # This description is tricky: being able to use cup depends on there being # 2048 bytes of memory and the hairy nl string. superbee-xsb|beehive super bee:\ :am:bs:da:db:pt:xb:\ :co#80:dC#10:it#8:li#25:\ :cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EF%r%3%3:cr=\r:ct=\E3:\ :dc=\EP:dl=\EM:do=^J:ho=\EH:is=\EH\EJ:k1=\Ep:k2=\Eq:\ :k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:kd=\EB:\ :kh=\EH:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:\ :nl=\n\200\200\200\n\200\200\200\EA\EK\200\200\200\ET\ET:\ :se=\E_3:\ :sf=\n\200\200\200\n\200\200\200\EA\EK\200\200\200\ET\ET:\ :so=\E_1:st=\E1:up=\EA:ve=^J: # This loses on lines > 80 chars long, use at your own risk superbeeic|super bee with insert char:\ :ei=\ER:ic=:im=\EQ:tc=superbee-xsb: sb2|sb3|fixed superbee:\ :xb@:\ :tc=superbee: # Reports are that most of these Beehive entries (except superbee) have not # been tested and do not work right. :se: is a trouble spot. Be warned. # (bee: removed obsolete ":ko=al,bt,ce,cl,dc,dl,ei,ho,ic,im:" -- esr) beehive|bee|harris beehive:\ :am:bs:mi:\ :co#80:li#24:\ :al=\EL:bt=\E>:cd=\EJ:ce=\EK:cl=\EE:cm=\EF%+ %+ :\ :dc=\EP:dl=\EM:do=\EB:ei=\E@:ho=\EH:ic=:im=\EQ:kb=^H:\ :kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:nd=\EC:se=\Ed@:\ :so=\EdP:ue=\Ed@:up=\EA:us=\Ed`: # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs. # good grief - does this entry make sg/ug when it doesn't have to? # look at those spaces in se/so. Seems strange to me... # (bh3m: mapped ":pt:" to default tabs -- esr) beehive3|bh3m|beehiveIIIm:\ :am:bs:pt:\ :co#80:li#20:\ :al=\023:bl=^G:cd=^R:ce=^P:cl=^E^R:cr=^M:dl=\021:\ :do=^J:ho=^E:if=/usr/share/tabset/beehive:le=^H:\ :ll=^E^K:nd=^L:se= ^_:sf=^J:so=^] :ta=^I:up=^K: beehive4|bh4|beehive 4:\ :am:\ :co#80:li#24:\ :bl=^G:cd=\EJ:ce=\EK:cl=\EE:cr=^M:do=^J:ho=\EH:\ :le=\ED:nd=\EC:sf=^J:up=\EA: # (microb: mapped ":pt:" to default tabs -- esr) microb|microbee|micro bee series:\ :am:bs:pt:\ :co#80:li#24:\ :bl=^G:cd=\EJ:ce=\EK:cl=\EE:cm=\EF%+ %+ :cr=^M:do=^J:\ :k1=\Ep:k2=\Eq:k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:\ :k8=\Ew:k9=\Ex:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:\ :le=^H:nd=\EC:se=\Ed@ :sf=^J:so= \EdP:ta=^I:ue=\Ed@:\ :up=\EA:us=\Ed`: # 8675, 8686, and bee from Cyrus Rahman # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr) ha8675|harris 8675:\ :F1=^W:F2=\ER:F3=\EE:F4=\EI:F5=\Ei:F6=\Eg:\ :is=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU:k1=^F:k2=^P:\ :k3=^N:k4=^V:k5=^J:k6=^T:k7=^H:k8=\177:k9=\Ee:k;=\Ed:tc=bee: # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation # in :is: -- esr) ha8686|harris 8686:\ :F1=\EW:F2=\002\E{\003:F3=\002\E|\003:F4=\002\E}\003:\ :F5=\002\E~\003:F6=\002\E\177\003:\ :is=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#:\ :k1=\002\Ep\003:k2=\002\Eq\003:k3=\002\Er\003:\ :k4=\002\Es\003:k5=\E3:k6=\EI:k7=\ER:k8=\EJ:k9=\E(:\ :k;=\Ej:tc=bee: #### Hazeltine # # Hazeltine appears to be out of the business now (1995). These guys were # co-owners of the Terminal Brain Damage Hall Of Fame along with Harris. # Good riddance. # # The ony contact information I have dates from 1993 and is: # # Customer Service Division # 15 Law Drive # P.O. Box 2076 # Fairfield, NJ 07007-2078 # # Since :nd: is blank, when you want to erase something you # are out of luck. You will have to do ^L's a lot to # redraw the screen. h1000 is untested. It doesn't work in # vi - this terminal is too dumb for even vi. (The code is # there but it isn't debugged for this case.) h1000|hazeltine 1000:\ :bs:\ :co#80:li#12:\ :bl=^G:cl=^L:cr=^M:do=^J:ho=^K:le=^H:nd= :sf=^J: # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981 h1420|hazeltine 1420:\ :am:bs:\ :co#80:li#24:\ :al=\E^Z:bl=^G:cd=\E^X:ce=\E^O:cl=\E^\:\ :cm=\E\021%r%.%+ :cr=^M:dl=\E^S:do=^J:le=^H:nd=^P:\ :se=\E^Y:sf=^J:so=\E^_:ta=^N:up=\E^L: # New "safe" cursor movement (11/87) from cgs@umd5.umd.edu. Prevents freakout # with out-of-range args and tn3270. No hz since it needs to receive ~'s. h1500|hazeltine 1500:\ :am:bs:hz:\ :co#80:li#24:\ :al=~\032:bl=^G:cd=~\030:ce=~^O:cl=~^\:\ :cm=~\021%r%>^^ %+`%+`:cr=^M:dl=~\023:do=~^K:ho=~^R:\ :kd=^J:kh=~^R:kl=^H:kr=^P:ku=~^L:le=^H:nd=^P:se=~^Y:\ :sf=^J:so=~^_:up=~^L: # h1510 assumed to be in sane escape mode. Else use h1500. # (h1510: early versions of this entry apparently had ":se=\E^_:so=\E^Y:", # but these caps were commented out in 8.3; also, removed incorrect # and overridden ":do=^J:" -- esr) h1510|hazeltine 1510:\ :am:bs:\ :co#80:li#24:\ :al=\E^Z:bl=^G:cd=\E^X:ce=\E^O:cl=\E^\:\ :cm=\E\021%r%.%.:cr=^M:dl=\E^S:do=\E^K:le=^H:nd=^P:\ :sf=^J:up=\E^L: # (h1520: removed incorrect and overridden ":do=^J:" -- esr) h1520|hazeltine 1520:\ :am:bs:hz:\ :co#80:li#24:\ :al=~^Z:bl=^G:cd=~^X:ce=~^O:cl=~^\:cm=~\021%r%.%.:\ :cr=^M:dl=~^S:do=~^K:ho=~^R:le=^H:nd=^P:se=~^Y:sf=^J:\ :so=~^_:up=~^L: # Note: the h1552 appears to be the first Hazeltine terminal which # is not braindamaged. It has tildes and backprimes and everything! # Be sure the auto lf/cr switch is set to cr. h1552|hazeltine 1552:\ :al=\EE:dl=\EO:do=^J:k1=\EP:k2=\EQ:k3=\ER:l1=blue:\ :l2=red:l3=green:tc=vt52: h1552rv|hazeltine 1552 reverse video:\ :do=^J:se=\ET:so=\ES:tc=h1552: # Note: h2000 won't work well because of a clash between upper case and ~'s. h2000|hazeltine 2000:\ :am:bs:nc:\ :co#74:li#27:\ :al=~\032:bl=^G:cl=~\034:cm=~\021%r%.%.:dl=~\023:\ :do=^J:ho=~^R:le=^H:pc=\177:sf=^J: # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote: # I tested this termcap entry for the Hazeltine Esprit with vi. It seems # to work ok. There is one problem though if one types a lot of garbage # characters very fast vi seems not able to keep up and hangs while trying # to insert. That's in insert mode while trying to insert in the middle of # a line. It might be because the Esprit doesn't have insert char and delete # char as a built in function. Vi has to delete to end of line and then # redraw the rest of the line. esprit|Hazeltine Esprit I:\ :am:bw:\ :co#80:li#24:\ :al=\E^Z:bl=^G:bt=\E^T:cd=\E^W:ce=\E^O:cl=\E^\:\ :cm=\E\021%r%.%.:cr=^M:dl=\E^S:do=\E^K:ho=\E^R:\ :is=\E?:k0=^B0^J:k1=^B1^J:k2=^B2^J:k3=^B3^J:k4=^B4^J:\ :k5=^B5^J:k6=^B6^J:k7=^B7^J:k8=^B8^J:k9=^B9^J:kb=^H:\ :kd=\E^K:ke=\E>:kh=\E^R:kl=^H:kr=^P:ks=\E<:ku=\E^L:\ :l0=0:l1=1:l2=2:l3=3:l4=4:l5=5:l6=6:l7=7:l8=8:l9=9:\ :le=^H:nd=^P:se=\E^Y:sf=^J:so=\E^_:up=\E^L: esprit-am|hazeltine esprit auto-margin:\ :am:\ :tc=esprit: #### IBM # ibm327x|line mode IBM 3270 style:\ :gn:\ :ce=^M:cl=^M^J:ho=^M: # From: J.B. Nicholson-Owens <jeffo@uiuc.edu> 8 Mar 94 ibm3101|i3101|IBM 3101-10:\ :am:bs:pt:xo:\ :co#80:li#24:\ :bl=^G:cd=\EJ:ce=\EI:cl=\EK:cm=\EY%+ %+ :cr=^M:\ :ct=\E1:do=^J:ho=\EH:if=/usr/share/tabset/ibm3101:\ :kb=^H:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:\ :nw=^M^J:sf=^J:st=\E0:ta=^I:up=\EA: # Received from the IBM terminals division (given to DRB) # June 1988 for PS/2 OS 2.2.3 cut ibm3151|i3151:\ :me=\E4@:\ :..sa=\E4%{64}%?%p1%{0}%>%p1%{4}%<%&%t%{8}%|%;%?%p1%{7}%=%t%{16}%|%;%?%p2%t%{1}%|%;%?%p3%t%{4}%|%;%?%p4%t%{2}%|%;%c:\ :se=\E4@:so=\E4A:ue=\E4@:us=\E4B:tc=ibm3163: # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992 # I commented out some IBM extensions. ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display:\ :am:mi:ms:\ :co#80:it#8:li#24:\ :F1=\Ek\r:F2=\El\r:F3=\E!a\r:F4=\E!b\r:F5=\E!c\r:\ :F6=\E!d\r:F7=\E!e\r:F8=\E!f\r:F9=\E!g\r:FA=\E!h\r:\ :FB=\E!i\r:FC=\E!j\r:FD=\E!k\r:FE=\E!l\r:bl=^G:\ :cd=\EJ:ce=\EI:cl=\EH\EJ:cm=\EY%+ %+ :cr=^M:dc=\EQ:\ :dl=\EO:do=\EB:ho=\EH:k1=\Ea\r:k2=\Eb\r:k3=\Ec\r:\ :k4=\Ed\r:k5=\Ee\r:k6=\Ef\r:k7=\Eg\r:k8=\Eh\r:\ :k9=\Ei\r:k;=\Ej\r:kA=\EN:kC=\EL\r:kD=\EQ:kE=\EI:\ :kI=\EP \010:kL=\EO:kS=\EJ:kT=\E0:ka=\E 1:kb=^H:\ :kd=\EB:kh=\EH:kl=\ED:kr=\EC:kt=\E1:ku=\EA:le=\ED:\ :mb=\E4D:md=\E4H:me=\E4@\E<@:mk=\E4P:mr=\E4A:nd=\EC:\ :..sa=\E4%'@'%?%p1%t%'A'%|%;\n%?%p2%t%'B'%|%;\n%?%p3%t%'A'%|%;\n%?%p4%t%'D'%|%;\n%?%p5%t%'@'%|%;\n%?%p6%t%'H'%|%;\n%?%p7%t%'P'%|%;%c\n%?%p9%t\E>A%e\E<@%;:\ :se=\E4@:sf=^J:so=\E4A:te=\E>A:ti=\E>A:ue=\E4@:\ :up=\EA:us=\E4B: # How the 3164 sgr string works: # %{32} # push space for no special video characteristics # %?%p2%t%{1}%|%; # if p2 set, then OR the 1 bit for reverse # %?%p3%t%{4}%|%; # if p3 set, then OR the 4 bit for blink # %?%p4%t%{2}%|%; # if p4 set, then OR the 2 bit for underline # %c # pop Pa1 # %{39}%p1%- # calculate 32 + (7 - p1) for foreground # %c # pop Pa2 # %{64} # use only black background for now # %c # pop Pa3 ibm3164|i3164|3164:\ :mb=\E4D:md=\E4H:me=\E4@:\ :..sa=\E4%{32}%?%p2%t%{1}%|%;%?%p3%t%{4}%|%;%?%p4%t%{2}%|%;%c%{39}%p1%-%c%{64}%c:tc=ibm3163: # (ibmaed: mapped ":pt:" to default tabs -- esr) ibmaed|IBM Experimental display:\ :am:bs:eo:ms:pt:\ :co#80:li#52:\ :al=\EN:cd=\EJ:ce=\EI:cl=\EH\EK:cm=\EY%+ %+ :dc=\EQ:\ :dl=\EO:do=\EB:ei=:ho=\EH:ic=\EP:im=:kb=^H:kd=\EB:\ :kl=\ED:kr=\EC:ku=\EA:nd=\EC:se=\E0:so=\E0:ue=:\ :up=\EA:us=:vb=\EG: ibm-apl|apl|IBM apl terminal simulator:\ :li#25:\ :tc=dm1520: # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'. # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr) ibmmono|ibm5151|IBM workstation monochrome:\ :bs:es:hs:\ :al=\EL:dl=\EM:ds=\Ej\EY8 \EI\Ek:fs=\Ek:k0=\E<:\ :k1=\ES:k2=\ET:k3=\EU:k4=\EV:k5=\EW:k6=\EP:k7=\EQ:\ :k8=\ER:k9=\EY:kF=\EE:kI=\200:kN=\EE:kP=\Eg:kR=\EG:\ :kb=^H:kh=\EH:l0=f10:md=\EZ:me=\Ew\Eq\Ez\EB:\ :mk=\EF\Ef0;\Eb0;:mr=\Ep:se=\Ez:so=\EZ:sr=\EA:\ :ts=\Ej\EY8%+ \Eo:ue=\Ew:us=\EW:tc=ibm3101: ibmega-c|ibm5154-c|IBM Enhanced Color Display:\ :se=\EB:so=\EF\Ef3;:ue=\EB:us=\EF\Ef2;:tc=ibmmono: # ibmapa* and ibmmono entries come from ACIS 4.3 distribution rtpc|ibmapa16|ibm6155|IBM 6155 Extended Monochrome Graphics Display:\ :li#32:\ :ds=\Ej\EY@ \EI\Ek:ts=\Ej\EY@%+ \Eo:tc=ibmmono: # Advanced Monochrome (6153) and Color (6154) Graphics Display: ibmapa8c|ibmapa8|ibm6154|ibm6153|IBM 6153/4 Advanced Graphics Display:\ :li#31:\ :ds=\Ej\EY? \EI\Ek:ts=\Ej\EY?%+ \Eo:tc=ibmmono: ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display:\ :li#31:\ :ds=\Ej\EY? \EI\Ek:mh=\EF\Ef7;:ts=\Ej\EY?%+ \Eo:tc=ibmega-c: # From: Marc Pawliger <marc@ibminet.awdpa.ibm.com> # also in /usr/lpp/bos/bsdsysadmin. # (hft-c: this entry had :kb=\E[D:kf=\E[C: on the line with ku/kd/kh; this was # pretty obviously mislabeled for :le: and :nd:; also ":ul=\E[4m:" was clearly # a typo for ":us=\E[4m:"; also ":el=\E[K:" was a typo for ":ce=\E[K:". # There was an unknown boolean ":ht:" which I assume was meant to set # hardware tabs, so I have insrted it#8. Finally, "ac=^N" paired with the # ae looked like a typo for ":as=^N:" -- esr) ibm8512|ibm8513|hft-c|IBM High Function Terminal:\ :am:mi:ms:\ :co#80:it#8:li#25:\ :AL=\E[%dL:DL=\E[%dM:ae=^O:al=\E[L:as=^N:cd=\E[J:\ :ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:dl=\E[M:dm=\E[4h:\ :do=^J:ec=\E[%dX:ed=\E[4l:ei=\E[4l:ho=\E[H:im=\E[4h:\ :is=\Eb\E[m\017\E[?7h:k0=\E[010q:k1=\E[001q:\ :k2=\E[002q:k3=\E[003q:k4=\E[004q:k5=\E[005q:\ :k6=\E[006q:k7=\E[007q:k8=\E[008q:k9=\E[009q:kd=\E[B:\ :kh=\E[H:ku=\E[A:le=\E[D:mb=\E[5m:md=\E[1m:me=\E[m:\ :mr=\E[7m:nd=\E[C:rc=\E[u:\ :rs=\Eb\E[m\017\E[?7h\E[H\E[J:sc=\E[s:se=\E[m:\ :so=\E[7m:te=\E[20h:ti=\E[20;4l\E[?7h\Eb:ue=\E[m:\ :up=\E[A:us=\E[4m: hft|AIWS High Function Terminal:\ :am:xo:\ :co#80:li#25:\ :al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:\ :cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=^J:ei=\E6:\ :ho=\E[H:ic=\E[@:im=\E6:k1=\E[001q:k2=\E[002q:\ :k3=\E[003q:k4=\E[004q:k5=\E[005q:k6=\E[006q:\ :k7=\E[007q:k8=\E[008q:k9=\E[009q:kN=\E[153q:\ :kP=\E[159q:ka=\E[010q:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:\ :kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:\ :mk=\E[8m:mr=\E[7m:nd=\E[C:se=\E[m:sf=^J:so=\E[7m:\ :ta=^I:ue=\E[m:up=\E[A:us=\E[4m: # From: <pryor@math.berkeley.edu> ibm5081|ibmmpel|IBM 5081 1024x1024 256/4096 color display:\ :es:hs:\ :li#33:\ :ds=\Ej\EYA \EI\Ek:fs=\Ek:ts=\Ej\EYA%+ \Eo:tc=ibmmono: ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 enhanced color display:\ :es:hs:\ :li#33:\ :ds=\Ej\EYA \EI\Ek:fs=\Ek:ts=\Ej\EYA%+ \Eo:tc=ibmega-c: ibm-system1|system1|ibm system/1 computer:\ :am:xt:\ :co#80:li#24:\ :bl=^G:cl=^Z:cm=\005%+ %+ :ho=^K:le=^H:nd=^\:sf=^J:\ :up=^^: #### Infoton/General Terminal Corp. # # gt100 sounds like something DEC would come out with. Let's hope they don't. i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100):\ :am:bs:\ :co#80:li#24:\ :al=\EL:bl=^G:cd=\EJ:ce=\EK:cl=^L:cm=\Ef%r%+ %+ :\ :cr=^M:dl=\EM:do=^J:ho=\EH:le=^H:nd=\EC:se=\Ea:sf=^J:\ :so=\Eb:up=\EA:vb=\Eb\Ea: i400|infoton 400:\ :am:bs:\ :co#80:li#25:\ :al=\E[L:bl=^G:ce=\E[N:cl=\E[2J:cm=%i\E[%3;%3H:cr=^M:\ :dc=\E[4h\E[2Q\E[P\E[4l\E[0Q:dl=\E[M:do=^J:\ :ei=\E[4l\E[0Q:im=\E[4h\E[2Q:le=^H:nd=\E[C:sf=^J:\ :up=\E[A: # (addrinfo: removed obsolete ":bc=^Z:" -- esr) addrinfo:\ :am:\ :co#80:li#24:\ :bl=^G:cd=^K:cl=^L:..cm=\037%p1%{1}%-%c%p2%{1}%-%c:\ :cr=^M:do=^J:ho=^H:le=^Z:ll=^H^\:nd=^Y:sf=^J:up=^\: infoton:\ :am:\ :Nl#0:co#80:lh#0:li#24:lw#0:\ :bl=^G:cd=^K:cl=^L:cr=^M:do=^J:le=^Z:ll=^H^\:nd=^Y:\ :sf=^J:up=^\: # (infotonKAS: removed obsolete ":bc=^Z:" -- esr) infotonKAS:\ :am:\ :co#80:li#24:\ :bl=^G:cd=^K:cl=^L:cr=^M:do=^J:le=^Z:ll=^H^\:nd=^Y:\ :sf=^J:up=^\: #### Interactive Systems Corp # # ISC used to sell OEMed and customized hardware to support ISC UNIX. # ISC UNIX still exists in 1995, but ISC itself is no more; they got # bought out by Sun. # # From: <cithep!eric> Wed Sep 16 08:06:44 1981 # (intext: removed obsolete ":ma=^K^P^R^L^L :"; # mapped ":pt:" to default tabs, removed obsolete ":bc=^_:", also the # ":le=^_:" later overridden -- esr) intext|Interactive Systems Corporation modified owl 1200:\ :am:\ :co#80:li#24:sg#1:\ :al=\020:bl=^G:bt=^Y:cd=\026J:ce=^Kp^R:cl=\014:\ :cm=\017%+ %+ :cr=^M:dc=\022:dl=\021:do=^J:ei=^V<:\ :im=^V;:ip=:k0=^VJ\r:k1=^VA\r:k2=^VB\r:k3=^VC\r:\ :k4=^VD\r:k5=^VE\r:k6=^VF\r:k7=^VG\r:k8=^VH\r:\ :k9=^VI\r:kb=^H:kd=^J:ke=^V9:kh=^Z:kl=^_:kr=^^:\ :ks=\036\072\264\026%:ku=^\:le=^H:nd=^^:se=^V# :\ :sf=^J:so=^V$\054:ta=^I:up=^\: intext2|intextii|INTERACTIVE modified owl 1251:\ :am:bw:ul:\ :co#80:li#24:sg#0:\ :al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:ch=\E[%+^AG:\ :cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:\ :do=\E[B:ei=:ic=\E[@:im=:k0=\E@\r:k1=\EP\r:k2=\EQ\r:\ :k3=\ES\r:k4=\ET\r:k5=\EU\r:k6=\EV\r:k7=\EW\r:\ :k8=\EX\r:k9=\EY\r:kb=^H:kd=\EB\r:kh=\ER\r:kl=\ED\r:\ :kr=\EC\r:ku=\EA\r:l0=REFRSH:l1=DEL CH:l2=TABSET:\ :l3=GOTO:l4=+PAGE:l5=+SRCH:l6=-PAGE:l7=-SRCH:l8=LEFT:\ :l9=RIGHT:nd=\E[C:se=\E[2 D:sf=\E[S:so=\E[6 D:\ :sr=\E[T:ta=^I:ue=\E[2 D:up=\E[A:us=\E[18 D:\ :vb=\E[;;;;;;;;;2;;u\E[;;;;;;;;;1;;u: #### Kimtron (abm, kt) # # Kimtron entries include (undocumented) codes for: enter dim mode (:mh:), # enter bold mode (:md:), enter reverse mode (:mr:), turn off all attributes # (:me:). # Kimtron ABM 85 added by Dual Systems # (abm85: mapped ":pt:" to default tabs; removed duplicated ":kd=^J:" -- esr) abm85|Kimtron ABM 85:\ :am:bs:bw:ms:pt:\ :co#80:li#24:sg#1:ug#1:\ :al=\EE:bt=\EI:cd=\Ey:ce=\Et:cl=\E*:cm=\E=%+ %+ :\ :dc=\EW:dl=\ER:do=^J:ei=\Er:\ :if=/usr/share/tabset/stdcrt:im=\EQ:\ :is=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq:kb=^H:kd=^J:kh=^^:\ :kl=^H:kr=^L:ku=^K:nd=^L:se=\Ek:so=\Ej:ue=\Em:up=^K:\ :us=\El: # Kimtron ABM 85H added by Dual Systems. # Some notes about the 85h entries: # 1) there are several firmware revs of 85H in the world. Use o85h for # firmware revs prior to SP51 # 2) Make sure to use 85h entry if the terminal is in 85H mode and the # 85e entry if it is in 920 emulation mode. They are incompatible in # some places and NOT software settable i.e., :is: can't fix change it) # 3) In 85h mode, the arrow keys and special functions transmit when # the terminal is in dup-edit, and work only locally in local-edit. # Vi won't swallow `del char' for instance, but :vs: turns on # dup-edit anyway so that the arrow keys will work right. If the # arrow keys don't work the way you like, change :vs:, :ve:, and :is:. # 920E mode does not have software commands to toggle between dup # and local edit, so you get whatever was set last on the terminal. # 4) :vb: attribute is nice, but seems too slow to work correctly (\Eb<pad>\Ed) # 5) Make sure `hidden' attributes are selected. If `embedded' attributes # are selected, the entries :sg@: and :ug@: should be removed. # 6) auto new-line should be on (selectable from setup mode only) # # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985 abm85h|85H|85h|Kimtron ABM 85H, 85H mode:\ :hs:\ :sg@:ug@:\ :ds=\Ee:fs=^M:im=\EZ:\ :is=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El:\ :kd=^V:me=\E(\EG0:mh=\E):mr=\EG4:se=\EG0:so=\EG4:\ :ts=\Eg\Ef:ue=\EG0:us=\EG8:vb@:ve=\E.4:vs=\E.2:tc=abm85: abm85e|85E|85e|Kimtron ABM 85H, 920E mode:\ :sg@:ug@:\ :im=\EZ:\ :is=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em:\ :me=\E(\Ek:mh=\E):mr=\Ej:vb@:tc=abm85: abm85h-o|oabm85h|o85h|Kimtron ABM 85H, old firmware rev.:\ :sg@:ug@:\ :im=\EZ:\ :is=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF:\ :me=\E(\Ek:mh=\E):mr=\Ej:\ :vb=\200\200\200\007\200\200\200:tc=abm85: # From: <malman@bbn-vax.arpa> # (kt7: removed obsolete ":ko=ic,dc,al,dl,cl,ce,cd,bt:", ":ma=^V^J^L :"; # mapped ":pt:" to default tabs -- esr) kt7|kimtron model kt-7:\ :am:bs:pt:\ :co#80:li#24:\ :al=\EE:bt=\EI:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :\ :dc=\EW:dl=\ER:do=^V:ei=:fs=\Eg:ho=^^:ic=\EQ:\ :if=/usr/share/tabset/stdcrt:im=:is=\El\E":k0=^AI\r:\ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:\ :k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:kb=^H:kd=^V:\ :kh=^^:kl=^H:kr=^L:ku=^K:nd=^L:se=\EG0:so=\EG4:\ :ts=\Ef:ue=\EG0:up=^K:us=\EG8: #### Microterm (act, mime) # # The mime1 entries refer to the Microterm Mime I or Mime II. # The default mime is assumed to be in enhanced act iv mode. # # New "safe" cursor movement (5/87) from reuss@umd5.umd.edu. Prevents freakout with # out-of-range args on Sytek multiplexors. No ":so=^N:" and ":se=^N:" since # it gets confused and it's too dim anyway. No ic since Sytek insists ^S # means xoff. # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr) act4|microterm|microterm act iv:\ :am:bs:\ :co#80:li#24:\ :al=2.3*\001<2.3*/>:bl=^G:cd=2.2*\037:ce=.1*\036:\ :cl=12\014:cm=\024%+^X%>/0%+P:cr=^M:dc=.1*\004:\ :dl=2.3*\027:do=^K:ho=^]:kd=^K:kl=^H:kr=^X:ku=^Z:\ :le=^H:nd=^X:sf=^J:up=^Z: # The padding on :sr: and :ta: for act5 and mime is a guess and not final. # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)... # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr) act5|microterm5|microterm act v:\ :kd=^K:kl=^H:kr=^X:ku=^Z:sr=\EH:uc=^H\EA:tc=act4: # Act V in split screen mode. act5s is not tested and said not to work. act5s|skinny act5:\ :co#39:li#48:\ :te=\EQ:ti=\EP:tc=act5: # Mimes using brightness for standout. Half bright is really dim unless # you turn up the brightness so far that lines show up on the screen. mime-fb|full bright mime1:\ :is=^S\E:se=^S:so=^Y:tc=mime: mime-hb|half bright mime1:\ :is=^Y\E:se=^Y:so=^S:tc=mime: # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode # the more plausible ":do=^J:"; mapped ":pt:" to ":it#8:" -- esr) # uc was at one time disabled to get around a curses bug, be wary of it mime|mime1|mime2|mimei|mimeii|microterm mime1:\ :am:bs:pt:\ :co#80:it#8:li#24:vt#9:\ :al=\001:bl=^G:cd=^_:ce=^^:cl=^]^C:\ :cm=\024%+^X%> 0%+P:cr=^M:dl=\027:do=^J:ho=^]:\ :is=^S\E^Q:kd=^K:kl=^H:kr=^X:ku=^Z:le=^H:nd=^X:sf=^J:\ :sr=\022:ta=\011:uc=^U:up=^Z: # These termcaps (for mime 2a) put the terminal in low intensity mode # since high intensity mode is so obnoxious. mime2a-s|microterm mime2a (emulating an enhanced soroc iq120):\ :am:bs:\ :co#80:li#24:\ :al=\001:bl=^G:cd=\EJ:ce=\EK:cl=\EL:cm=\E=%+ %+ :\ :cr=^M:dc=\ED:dl=\027:do=^J:ei=^Z:ho=^^:im=\EE:ip=:\ :is=\E):kd=^J:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:se=\E;:\ :sf=^J:so=\E\072:sr=\EI:ue=\E7:up=\EI:us=\E6: # This is the preferred mode (but ^X can't be used as a kill character) # (mime2a: replaced ":pt:" with SCO's "it#8" -- esr) mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52):\ :bs:pt:\ :co#80:it#8:li#24:\ :al=\001:bl=^G:cd=\EQ:ce=\EP:cl=\EL:cm=\EY%+ %+ :\ :cr=^M:dc=^N:dl=\027:do=^J:ei=^Z:ho=\EH:im=^O:ip=:\ :is=^Y:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:\ :se=\E9:sf=^J:so=\E8:sr=\EA:ta=^I:ue=\E5:up=\EA:\ :us=\E4: # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr) mime3a|mime1 emulating 3a:\ :am@:\ :kd=^K:kl=^H:kr=^X:ku=^Z:tc=adm3a: # (mime3ax: mapped ":pt:" to default tabs -- esr) mime3ax|mime-3ax|mime1 emulating enhanced 3a:\ :pt:\ :it#8:\ :al=\001:cd=^_:ce=^X:dl=\027:ta=\011:tc=mime3a: # Wed Mar 9 18:53:21 1983 # We run our terminals at 2400 baud, so there might be some timing problems at # higher speeds. The major improvements in this model are the terminal now # scrolls down and insert mode works without redrawing the rest of the line # to the right of the cursor. This is done with a bit of a kludge using the # exit graphics mode to get out of insert, but it does not appear to hurt # anything when using vi at least. If you have some users using act4s with # programs that use curses and graphics mode this could be a problem. mime314|mm314|mime 314:\ :am:\ :co#80:li#24:\ :al=^A:cd=^_:ce=^^:cl=^L:cm=\024%.%.:dc=^D:dl=^W:\ :ei=^V:ho=^]:im=^S:kd=^K:kl=^H:kr=^X:ku=^Z:le=^H:\ :nd=^X:ta=^I:up=^Z: # Fri Aug 5 08:11:57 1983 # This entry works for the ergo 4000 with the following setups: # ansi,wraparound,newline disabled, xon/xoff disabled in both # setup a & c. # # WARNING!!! There are multiple versions of ERGO 4000 microcode # Be advised that very early versions DO NOT WORK RIGHT !! # Microterm does have a ROM exchange program- use it or lose big ergo4000|microterm ergo 4000:\ :da:db:ms:\ :co#80:li#66:\ :AL=\E[1L:bl=^G:cd=\E[0J:ce=\E[0K:cl=\E[H\E[2J:\ :cm=\E[%i%d;%dH:cr=^M:dc=\E[1P:dl=\E[1M:do=\E[B:\ :ei=\E[4l:im=\E[4h:\ :is=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h:k1=\EOP:\ :k2=\EOQ:k3=\EOR:k4=\EOS:kd=\E[B:ke=\E=:kl=\E[D:\ :kr=\E[C:ks=\E=:ku=\E[A:l1=pf1:l2=pf2:l3=pf3:l4=pf4:\ :le=^H:nd=\E[C:se=\E[0m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:\ :up=\E[A: #### NCR # # NCR's terminal group was merged with AT&T's when AT&T bought the company. # For what happened to that group, see the ADDS section. # # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO. ncr7900i|7900i|ncr7900|7900|ncr 7900 model 1:\ :am:bw:ul:\ :co#80:li#24:sg#1:ug#1:\ :bl=^G:cd=\Ek:ce=\EK:cl=^L:cm=\E1%r%.%.:cr=^M:do=^J:\ :is=\E0@\010\E3\E4\E7:kd=^J:kh=^A:kl=^U:kr=^F:ku=^Z:\ :le=^H:ll=^A:mb=\E0B:me=\E0@:mh=\E0A:mr=\E0P:nd=^F:\ :pf=^T:po=^R:\ :..sa=\E0%p5%'@'%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c:\ :se=\E0@:sf=^J:so=\E0Q:ue=\E0@:up=^Z:us=\E0`: ncr7900i-na|ncr7900-na|7900-na|ncr 7900 model 1 with no arrows:\ :kd@:kl@:kr@:ku@:tc=ncr7900i: ncr7900iv|ncr 7900 model 4:\ :am:bw:es:hs:\ :co#80:li#24:\ :al=\E^N:bl=^G:cl=^L:cm=\013%+@\E\005%02:cr=^M:\ :dl=\E^O:do=^J:ds=\Ey1:fs=\Ek\Ey5:ho=\013@\E^E00:\ :k1=\ES:k2=\ET:k3=\EU:k4=\EV:k5=\EW:k6=\EP:k7=\EQ:\ :k8=\ER:kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:\ :l6=blue:l7=red:l8=white:le=^H:nw=^M^J:sf=^J:\ :ts=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo: ncr7901|7901|ncr 7901 model:\ :am:bw:ul:\ :co#80:li#24:\ :bl=^G:cd=\Ek:ce=\EK:ch=\020%+^J:cl=^L:cm=\EY%+ %+ :\ :cr=^M:cv=\013%+@:do=^J:is=\E4^O:kC=^L:kd=^J:kh=^H:\ :kl=^U:kr=^F:ku=^Z:le=^H:ll=^A:mb=\E0B:me=^O:mh=\E0A:\ :mr=\E0P:nd=^F:pf=^T:po=^R:\ :..sa=\E0%p5%'@'%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c\016:\ :se=^O:sf=^J:so=\E0Q\016:ue=^O:up=^Z:us=\E0`\016:\ :ve=^X:vi=^W: #### Perkin-Elmer (Owl) # # These are official terminfo entries from within Perkin-Elmer. # bantam|pe550|pe6100|perkin elmer 550:\ :co#80:li#24:\ :bl=^G:ce=\EI:cl=\EK:cm=\EX%+ \EY%+ :cr=^M:do=^J:\ :ho=\EH:le=^H:ll=\EH\EA:nd=\EC:sf=^J:up=\EA: fox|pe1100|perkin elmer 1100:\ :am:\ :co#80:li#24:\ :bl=^G:cd=\EJ:ce=\EI:cl=\EH\EJ:cm=\EX%+ \EY%+ :cr=^M:\ :ct=\E3:do=^J:ho=\EH:le=^H:ll=\EH\EA:nd=\EC:sf=^J:\ :st=\E1:up=\EA:vb=\020\002\020\003: owl|pe1200|perkin elmer 1200:\ :am:in:\ :co#80:li#24:\ :al=\EL:bl=^G:cd=\EJ:ce=\EI:cl=\EH\EJ:\ :cm=\EX%+ \EY%+ :cr=^M:ct=\E3:dc=\EO:dl=\EM:do=^J:\ :ei=:ho=\EH:ic=\EN:im=:ip=:k0=\ERJ:k1=\ERA:k2=\ERB:\ :k3=\ERC:k4=\ERD:k5=\ERE:k6=\ERF:k7=\ERG:k8=\ERH:\ :k9=\ERI:kb=^H:le=^H:ll=\EH\EA:nd=\EC:se=\E!\200:\ :sf=^J:so=\E!^H:st=\E1:up=\EA:vb=\020\002\020\003: pe1251|pe6300|pe6312|perkin elmer 1251:\ :am:\ :co#80:it#8:li#24:pb#300:sg#1:vt#8:\ :bl=^G:cd=\EJ:ce=\EI:cl=\EK:cm=\EX%+ \EY%+ :cr=^M:\ :ct=\E3:do=\EB:ho=\EH:k0=\ERA:k1=\ERB:k2=\ERC:\ :k3=\ERD:k4=\ERE:k5=\ERF:k6=\ERG:k7=\ERH:k8=\ERI:\ :k9=\ERJ:k;=\ERK:le=\ED:nd=\EC:sf=^J:st=\E1:up=\EA: pe7000m|perkin elmer 7000 series monochrome monitor:\ :am:\ :co#80:li#24:\ :bl=^G:bt=\E!Y:cd=\EJ:ce=\EI:cl=\EK:cm=\ES%+ %+ :\ :cr=^M:do=\EB:ho=\EH:i1=\E!\200\EW 7o\Egf\ES7 :\ :k0=\E!\200:k1=\E!^A:k2=\E!^B:k3=\E!^C:k4=\E!^D:\ :k5=\E!^E:k6=\E!^F:k7=\E!^G:k8=\E!^H:k9=\E!^I:\ :k;=\E!^J:kb=^H:kd=\E!U:kh=\E!S:kl=\E!V:kr=\E!W:\ :ku=\E!T:le=\ED:ll=\ES7 :nd=\EC:se=\E!\200:sf=^J:\ :so=\E!^H:sr=\ER:ue=\E!\200:up=\EA:us=\E! : pe7000c|perkin elmer 7000 series colour monitor:\ :am:\ :co#80:li#24:\ :bl=^G:bt=\E!Y:cd=\EJ:ce=\EI:cl=\EK:cm=\ES%+ %+ :\ :cr=^M:do=\EB:ho=\EH:\ :i1=\E!\200\EW 7o\Egf\Eb0\Ec7\ES7 :k0=\E!\200:\ :k1=\E!^A:k2=\E!^B:k3=\E!^C:k4=\E!^D:k5=\E!^E:\ :k6=\E!^F:k7=\E!^G:k8=\E!^H:k9=\E!^I:k;=\E!^J:kb=^H:\ :kd=\E!U:kh=\E!S:kl=\E!V:kr=\E!W:ku=\E!T:le=\ED:\ :ll=\ES7 :nd=\EC:se=\Eb0:sf=^J:so=\Eb2:sr=\ER:\ :ue=\E!\200:up=\EA:us=\E! : #### Sperry Univac # # Sperry Univac has merged with Burroughs to form Unisys. # # This entry is for the Sperry UTS30 terminal running the TTY # utility under control of CP/M Plus 1R1. The functionality # provided is comparable to the DEC vt100. uts30|sperry uts30 with cp/m@1R1:\ :am:bw:hs:\ :co#80:li#24:ws#40:\ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\ :LE=\E[%dD:RI=\E[%dC:SF=\E[%dB:SR=\E[%dA:UP=\E[%dA:\ :ae=\Ed:al=\EN:as=\EF:bl=^G:cd=\E[J:ce=\E[K:cl=^L:\ :cm=\E[%i%d;%dH:cr=^M:cs=\EU%+ %+ :dc=\EM:dl=\EL:\ :do=\EB:ei=:fs=^M:ho=\E[H:ic=\EO:im=:\ :is=\E[U 7\E[24;1H:kb=^H:kd=\EOB:kh=\E[H:kl=\EOD:\ :kr=\EOC:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:\ :mr=\E[7m:nd=\EC:\ :r2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\EX:\ :rf=/usr/lib/tabset/vt100:sc=\EW:se=\E[m:sf=^J:\ :so=\E[7m:sr=\EI:ta=^I:ts=\E]:uc=\EPB:ue=\E[m:\ :up=\E[A:us=\E[4m:ve=\ES:vi=\ER: #### Tandem # # Tandem builds these things for use with its line of fault-tolerant # transaction-processing computers. They aren't generally available # on the merchant market, and so are fairly uncommon. # tandem6510|adm3a repackaged by Tandem:\ :tc=adm3a: # A funny series of terminal that TANDEM uses. The actual model numbers # have a fourth digit after 653 that designates minor variants. These are # natively block-mode and rather ugly, but they have a character mode which # this doubtless(?) exploits. There is a 6520 that is slightly dumber. # (tandem653: had ":sb=\ES:", probably someone's mistake for sf -- esr) tandem653|t653x|Tandem 653x multipage terminal:\ :am:bs:da:db:hs:\ :co#80:li#24:sg#1:ug#1:ws#64:\ :cd=\EJ:ce=\EK:cl=\EI:cm=\023%+ %+ :do=^J:ds=\Eo\r:\ :fs=^M:ho=\EH:if=/usr/share/tabset/tandem653:le=^H:\ :nd=\EC:se=\E6 :sf=\ES:so=\E6$:sr=\ET:ts=\Eo:ue=\E6 :\ :up=\EA:us=\E60: #### Tandy/Radio Shack # # Tandy has a line of VDTs distinct from its microcomputers. # dmterm|deskmate terminal:\ :am:bw:\ :co#80:li#24:\ :al=\EP:bl=^G:cd=\EJ:ce=\EK:cl=\Ej:cm=\EY%+ %+ :\ :cr=^M:dc=\ES:dl=\ER:do=\EB:ei=:ho=\EH:ic=\EQ:im=:\ :k0=\E1:k1=\E2:k2=\E3:k3=\E4:k4=\E5:k5=\E6:k6=\E7:\ :k7=\E8:k8=\E9:k9=\E0:kd=\EB:kh=\EH:kl=\ED:kr=\EC:\ :ku=\EA:l0=f1:l1=f2:l2=f3:l3=f4:l4=f5:l5=f6:l6=f7:\ :l7=f8:l8=f9:l9=f10:le=^H:ll=\EE:nd=\EC:se=\EG0:\ :sf=\EX:so=\EG4:ta=^I:up=\EA:ve=\EG6:vi=\EG5: dt100|dt-100|Tandy DT-100 terminal:\ :xo:\ :co#80:li#24:sg#1:ug#1:\ :ac=kkllmmjjnnwwvvttuuqqxx:ae=^O:al=\E[L:as=^N:bl=^G:\ :cd=\E[J:ce=\E[K:cl=\E[;H\E[2J:cm=\010\E[%i%d;%dH:\ :cr=^M:cs=\E[%2;%2r:dc=\E[P:dl=\E[M:do=\E[B:ei=:\ :ho=\E[H:ic=\E[@:im=:is=\E[?3l\E)0\E(B:k1=\E[?3i:\ :k2=\E[2i:k3=\E[@:k4=\E[M:k5=\E[17~:k6=\E[18~:\ :k7=\E[19~:k8=\E[20~:k9=\E[21~:k;=\E[?5i:kN=\E[29~:\ :kP=\E[28~:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\ :l1=f1:l2=f2:l3=f3:l4=f4:l5=f5:l6=f6:l7=f7:l8=f8:\ :le=^H:nd=\E[C:se=\E[m:sf=^J:so=\E[7m:sr=\EM:ta=^I:\ :ue=\E[m:up=\E[A:us=\E[4m:ve=\E[?25h:vi=\E[?25l: dt100w|dt-100w|Tandy DT-100 terminal:\ :co#132:\ :bl=^G:cr=^M:do=^J:is=\E[?3l\E)0\E(B:sf=^J:tc=dt100: dt110|Tandy DT-110 emulating ansi:\ :xo:\ :co#80:li#24:\ :@7=\E[K:ac=kkllmmjjnnwwvvuuttqqxx:ae=^O:al=\E[0L:\ :as=^N:bl=^G:cd=\E[0J:ce=\E[0K:cl=\E[;H\E[2J:\ :cm=\010\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:dc=\E[0P:\ :dl=\E[0M:do=\E[0B:eA=\E(B\E)0:ei=:ho=\E[H:ic=\E[0@:\ :im=:is=\E[?3l\E)0\E(B:k1=\E[1~:k2=\E[2~:k3=\E[3~:\ :k4=\E[4~:k5=\E[5~:k6=\E[6~:k7=\E[7~:k8=\E[8~:\ :k9=\E[9~:k;=\E[10~:kI=\E[@:kN=\E[26~:kP=\E[25~:\ :kd=\E[B:kh=\E[G:kl=\E[D:kr=\E[C:ku=\E[A:l0=f1:l1=f2:\ :l2=f3:l3=f4:l4=f5:l5=f6:l6=f7:l7=f8:l8=f9:l9=f10:\ :le=^H:nd=\E[C:se=\E[0m:sf=^J:so=\E[7m:sr=\EM:ta=^I:\ :ue=\E[0m:up=\E[0A:us=\E[4m:ve=\E[?25h:vi=\E[?25l: dt200|td200|Tandy 200:\ :am:xt:\ :co#40:li#16:\ :al=\EL:bl=^G:cd=^L:ce=\EK:cl=\EE:cm=\EY%+ %+ :cr=^M:\ :dl=\EM:do=^_:kd=^_:kl=^]:kr=^\:ku=^^:le=^H:nd=^\:\ :se=\Eq:sf=^J:so=\Ep:up=\EA: pt210|TRS-80 PT-210 printing terminal:\ :hc:os:\ :co#80:\ :bl=^G:cr=^M:do=^J:sf=^J: #### Tektronix (tek) # # Tektronix tubes are graphics terminals. Most of them use modified # oscilloscope technology incorporating a long-persistence green phosphor, # and support vector graphics on a main screen with an attached "dialogue # area" for interactive text. # tek|tek4012|4012|tektronix 4012:\ :os:\ :co#75:li#35:\ :bl=^G:cl=\E\014:cr=^M:do=^J:ff=\014:is=\E^O:le=^H: tek4013|4013|tektronix 4013:\ :ae=\E^O:as=\E^N:tc=tek4012: tek4014|4014|tektronix 4014:\ :co#81:li#38:\ :is=\E\017\E9:tc=tek4012: tek4015|4015|tektronix 4015:\ :ae=\E^O:as=\E^N:tc=tek4014: tek4014-sm|4014-sm|tektronix 4014 in small font:\ :co#121:li#58:\ :is=\E\017\E\072:tc=tek4014: tek4015-sm|4015-sm|tektronix 4015 in small font:\ :ae=\E^O:as=\E^N:tc=tek4014-sm: tek4023|4023|tex|tektronix 4023:\ :am:\ :co#80:li#24:vt#4:\ :bl=^G:cl=\E\014:cm=\034%r%+ %+ :cr=^M:do=^J:le=^H:\ :nd=^I:se=^_@:sf=^J:so=^_P: # It is recommended that you run the 4025 at 4800 baud or less; # various bugs in the terminal appear at 9600. It wedges at the # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed # on keyboard don't work. You have to hit BREAK twice to get # one break at any speed - this is a documented feature. # Can't use cursor motion because it's memory relative, and # because it only works in the workspace, not the monitor. # Same for home. Likewise, standout only works in the workspace. # # el was commented out since vi and rogue seem to work better # simulating it with lots of spaces! # # il1 and il had 145ms of padding, but that slowed down vi's ^U # and didn't seem necessary. # tek4024|tek4025|tek4027|tektronix 4024/4025/4027:\ :am:da:db:\ :co#80:it#8:li#34:lm#0:\ :AL=\037up\r\037ili %d\r:CC=^_:DL=\037dli %d\r\006:\ :DO=\037dow %d\r:LE=\037lef %d\r:RI=\037rig %d\r:\ :UP=\037up %d\r:al=\037up\r\037ili\r:bl=^G:\ :cd=\037dli 50\r:cl=\037era\r\n\n:cr=^M:dc=\037dch\r:\ :dl=\037dli\r\006:do=^F^J:ei=:ic=\037ich\r \010:im=:\ :is=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r:\ :ke=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r:\ :ks=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r:\ :le=^H:nd=\037rig\r:sf=^F^J:ta=^I:up=^K: tek4025-17|4025-17|4027-17|tek 4025 17 line window:\ :li#17:\ :tc=tek4025: tek4025-17-ws|4025-17-ws|4025-17ws|4027-17ws|4027-17-ws|tek 4025 17 line window in workspace:\ :is=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r:\ :se=\037att s\r:so=\037att e\r:te=\037mon h\r:\ :ti=\037wor h\r:tc=tek4025-17: tek4025-ex|tek4027-ex|tek 4025/4027 w/!:\ :is=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r:\ :te=\037com 33\r:ti=!com 31\r:tc=tek4025: # Tektronix 4025a # From: Doug Gwyn <gwyn@brl-smoke.ARPA> # The following status modes are assumed for normal operation (replace the # initial "!" by whatever the current command character is): # !COM 29 # NOTE: changes command character to GS (^]) # ^]DUP # ^]ECH R # ^]EOL # ^]RSS T # ^]SNO N # ^]STO 9 17 25 33 41 49 57 65 73 # Other modes may be set according to communication requirements. # If the command character is inadvertently changed, termcap can't restore it. # Insert-character cannot be made to work on both top and bottom rows. # Clear-to-end-of-display emulation via !DLI 988 is too groady to use, alas. # There also seems to be a problem with vertical motion, perhaps involving # delete/insert-line, following a typed carriage return. This terminal sucks. # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! # (tek4025a: mapped ":pt:" to default tabs; removed obsolete ":xx:". # This may mean the tek4025a entry won't work any more. -- esr) tek4025a|4025a|Tektronix 4025A:\ :am:bs:bw:da:db:pt:xo:\ :co#80:li#34:\ :CC=^]:DC=\035dch %d;:DL=\035dli %d;:DO=\035dow %d;:\ :LE=\035lef %d;:RI=\035rig %d;:SF=\035dow %d;:\ :UP=\035up %d;:al=\013\035ili;:bl=^G:bt=\035bac;:\ :ce=\035dch 80;:ch=\r\035rig %d;:\ :cl=\035era;\n\035rup;:cr=^M:ct=\035sto;:dc=\035dch;:\ :dl=\035dli;:do=^J:le=^H:nd=\035rig;:\ :rs=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;:\ :sf=^J:ta=^I:up=^K: # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981 # Here's the command file that I use to get rogue to work on the 4025. # It should work with any program using the old curses (e.g. it better # not try to scroll, or cursor addressing won't work. Also, you can't # see the cursor.) # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh) # (tek4025-cr: mapped ":pt:" to default tabs -- esr) tek4025-cr|4025-cr|tek 4025 for curses and rogue:\ :am:bs:pt:\ :co#80:li#33:\ :cl=\037era;:cm=\037jum%i%d\054%d;:do=^F^J:\ :is=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r:\ :le=^H:nd=\037rig;:nl=^F^J:te=\037wor 0:\ :ti=\037wor 33h:up=^K: # next two lines commented out since curses only allows 128 chars, sigh. # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\ # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0: tek4025ex|4025ex|4027ex|tek 4025 w/!:\ :is=\037com 33\r\n!sto 9\05417\05425\05433\05441\05449\05457\05465\05473\r:\ :te=\037com 33\r:ti=!com 31\r:tc=tek4025: tek4105|4105|tektronix 4105:\ :am:mi:ms:ul:xn:xt:\ :co#79:it#8:li#29:\ :ae=\E[0m:al=\E[1L:as=\E[1m:bl=^G:bt=\E[Z:cd=\E[J:\ :ce=\E[K:cl=\E[2J\E[H:cm=\E[%i%2;%2H:cr=^M:ct=\E[1g:\ :dc=\E[1P:dl=\E[1M:do=\E[1B:ei=\E[4l:ho=\E[H:\ :i1=\E%!1\E[0m:im=\E[4h:is=\E%!1\E[?6141\E[0m:kb=^H:\ :kd=\E[1B:kl=\E[1D:kr=\E[1C:ku=\E[1A:mb=\E[=3;<7m:\ :md=\E[=7;<4m:me=\E[=0;<1m:mh=\E[=1;<6m:mk=\E[=6;<5:\ :mr=\E[=1;<3m:nd=\E[1C:se=\E[=0;<1m:sf=\E[S:\ :so=\E[=2;<3m:sr=\E[T:ta=^I:ti=\E%!1\E[?6l\E[2J:\ :ue=\E[=0;<1m:up=\E[1A:us=\E[=5;<2m: tek4105-30|4105-30|4015 emulating 30 line vt100:\ :am:mi:ms:xn:xo:\ :co#80:it#8:li#30:vt#3:\ :@8=\EOM:DO=\E[%dB:K1=\EOq:K2=\EOr:K3=\EOs:K4=\EOp:\ :K5=\EOn:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ :ae=^O:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\ :ct=\E[3g:do=^J:eA=\E(B\E)0:ho=\E[H:k0=\EOy:k1=\EOP:\ :k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOt:k6=\EOu:k7=\EOv:\ :k8=\EOl:k9=\EOw:k;=\EOx:kb=^H:kd=\EOB:ke=\E[?1l\E>:\ :kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:\ :md=\E[1m:me=\E[m\017:mr=\E[7m:nd=\E[C:\ :r2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:\ :..sa=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;:\ :sc=\E7:se=\E[m:sf=^J:so=\E[1;7m:sr=\EM:st=\EH:ta=^I:\ :ue=\E[m:up=\E[A:us=\E[4m: tek4107|tek4109|4107|4109|tektronix terminals 4107 4109:\ :am:mi:ms:ul:xn:xt:\ :co#79:it#8:li#29:\ :bl=^G:cd=\EJ:ce=\EK:cl=\ELZ:cm=\EY%+ %+ :cr=^M:\ :do=^J:kb=^H:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=^H:\ :mb=\E%!1\E[5m\E%!0:md=\E%!1\E[1m\E%!0:\ :me=\E%!1\E[m\E%!0:mh=\E%!1\E[<0m\E%!0:\ :mr=\E%!1\E[7m\E%0:nd=\EC:\ :..sa=\E%%!1\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m\E%%!0:\ :se=\E%!1\E[m\E%!0:sf=^J:so=\E%!1\E[7;5m\E%!0:sr=\EI:\ :ta=^I:ue=\E%!1\E[m\E%!0:up=\EA:us=\E%!1\E[4m\E%!0:\ :ve=\E%!0:vs=\E%!3: # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s; # see the note attached to tek4207. tek4207-s|Tektronix 4207 with sysline but no memory:\ :es:hs:\ :ds=\E7\E[?6l\E[2K\E[?6h\E8:fs=\E[?6h\E8:\ :i2=\E7\E[?6l\E[2K\E[?6h\E8:\ :is=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J:\ :ts=\E7\E[?6l\E[2K\E[;%i%df:tc=tek4107: # The 4110 series may be a wonderful graphics series, but they make the 4025 # look good for screen editing. In the dialog area, you can't move the cursor # off the bottom line. Out of the dialog area, ^K moves it up, but there # is no way to scroll. # # Note that there is a floppy for free from Tek that makes the # 4112 emulate the vt52 (use the vt52 termcap). There is also # an expected enhancement that will use ANSI standard sequences. # # 4112 in non-dialog area pretending to scroll. It really wraps # but vi is said to work (more or less) in this mode. # # 'vi' works reasonably well with this entry. # otek4112|o4112-nd|otek4113|otek4114|tektronix 4110 series:\ :am:\ :co#80:li#34:\ :bl=^G:cl=\E^L:cr=^M:do=^J:le=^H:sf=^J:te=\EKA1\ELV1:\ :ti=\EKA0\ELV0\EMG0:up=^K: # The 4112 with the ANSI compatibility enhancement tek4112|tek4114|tektronix 4110 series:\ :am:bs:db:\ :co#80:li#34:\ :al=\E[L:bt=\E[Z:cd=\E[0J:ce=\E[0K:cl=\E[2J\E[0;0H:\ :cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:ei=:ic=\E[@:im=:\ :is=\E3!1:nd=\E[C:se=\E[m:sf=\E7\E[0;0H\E[M\E8:\ :so=\E[7m:sr=\E7\E[0;0H\E[L\E8:ue=\E[m:up=\EM:\ :us=\E[4m:ve=:vs=: tek4112-nd|4112-nd|4112 not in dialog area:\ :ns:\ :up=^K:tc=tek4112: tek4112-5|4112-5|4112 in 5 line dialog area:\ :li#5:\ :tc=tek4112: # (tek4113: this used to have ":nd=\LM1 \LM0:", someone's mistake; # removed ":as=\E^N:ae=\E^O:", which had been commented out in 8.3. # Note, the !0 and !1 sequences in :te:/:ti:/:ve:/:vs: were previously \0410 # and \0411 sequences...I don't *think* they were supposed to be 4-digit # octal -- esr) tek4113|tektronix 4113 color graphics, 5 line dialog area:\ :am:bs:da:eo:\ :co#80:li#5:\ :cl=\ELZ:do=^J:is=\EKA1\ELL5\ELV0\ELV1:le=^H:\ :nd=\ELM1 \ELM0:uc=\010\ELM1_\ELM0:\ :vb=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0: tek4113-34|4113-34|tektronix 4113 color graphics, 34 line dialog area:\ :li#34:\ :is=\EKA1\ELLB2\ELV0\ELV1:tc=tek4113: # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up . # :vb: needs enough delay to let you see the background color being toggled. # (tek4113-nd: mapped ":pt:" to default tabs -- esr) tek4113-nd|4113-nd|tektronix 4113 color graphics, no dialog area:\ :am:bs:eo:pt:\ :co#80:li#34:\ :cl=\E^L:do=^J:ho=\ELF7l\177 @:\ :is=\ELZ\EKA0\ELF7l\177 @:le=^H:ll=\ELF hl @:nd=^I:\ :se=\EMT1:so=\EMT2:uc=\010\EMG1_\EMG0:up=^K:\ :vb=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0:\ :vs=\ELZ\EKA0: # This entry is from Tek. Inc. (Brian Biehl) # (tek4115: mapped ":pt:" to default tabs; :bc: renamed to :le: -- esr) otek4115|Tektronix 4115:\ :am:bs:da:db:eo:pt:\ :co#80:li#34:\ :al=\E[L:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[;H\E[2J:\ :cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:\ :ho=\E[;H:if=/usr/share/tabset/vt100:im=\E[4h:\ :is=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[0m:\ :kb=^H:ke=\E>:ks=\E=:le=\E[D:nd=\E[C:se=\E[m:\ :so=\E[7m:sr=\EM:te=\E%!0\ELBG8\E%!1\E[34;1H\E[J:\ :ti=\E%!0\ELBB2\E%!1:ue=\E[m:up=\E[A:us=\E[4m:\ :ve=\E%!0\ELBG8\E%!1\E[34;1H:vs=\E%!0\ELBB2\E%!1: tek4115|newer tektronix 4115 entry with more ANSI capabilities:\ :am:xo:\ :co#80:li#34:\ :AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:\ :RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:\ :ce=\E[K:ch=\E[%+^AG:cl=\E[H\E[J:cm=\E[%i%d;%dH:\ :cr=^M:ct=\E[2g:cv=\E[%+^Ad:dc=\E[P:dl=\E[M:do=^J:\ :ei=:ho=\E[H:ic=\E[@:im=:kb=^H:kd=\E[B:kh=\E[H:\ :kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:\ :me=\E[0m:mk=\E[8m:mr=\E[7m:nd=\E[C:\ :..rp=%p1%c\E[%p2%{1}%-%db:\ :..sa=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m:\ :se=\E[m:sf=^J:so=\E[7m:st=\EH:ta=^I:ue=\E[m:up=\E[A:\ :us=\E[4m: # The tek4125 emulates a vt100 incorrectly - the scrolling region # command is ignored. The following entry replaces the :cs: with the needed # :al:, :dl:, and :im:; removes some cursor pad commands that the tek4125 # chokes on; and adds a lot of initialization for the tek dialog area. # Note that this entry uses all 34 lines and sets the cursor color to green. # Steve Jacobson 8/85 # (tek4125: there were two "\!"s in the is that I replaced with "\E!" -- esr) tek4125|4125:\ :li#34:\ :al=\E[1L:cs@:dl=\E[1M:im=\E1:\ :is=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\ :ks=\E=:rc@:sc@:tc=vt100: # From: <jcoker@ucbic> # (tek4107: mapped ":pt:" to default tabs. This was the termcap file's # entry for the 4107/4207, but SCO supplied another, less capable 4107 entry. # So we'll use that for 4107 and note that if jcoker wasn't confused you # may be able to use this one. -- esr) tek4207|Tektronix 4207 graphics terminal with memory:\ :am:bs:bw:mi:pt:ul:xn:\ :co#80:li#32:\ :al=3\E[L:bt=\E[Z:cd=\E[J:ce=5\E[K:cl=156\E[H\E[J:\ :cm=\E[%i%d;%dH:dc=4\E[P:dl=3\E[M:do=^J:ei=:ho=\E[H:\ :ic=4\E[@:im=:\ :is=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J:\ :kd=\ED:kh=\E[H:kl=\E[D:kr=\E[C:ku=\EM:le=^H:\ :mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:se=\E[m:\ :so=\E[7m:te=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f:\ :ti=\E[?6l\E[H\E[J:ue=\E[m:up=\EM:us=\E[4m: # From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985 # (tek4404: There was a "\!" in :ti: that I replaced with "\E!"; # also mapped ":pt:" to default tabs -- esr) tek4404|4404:\ :bs:pt:\ :co#80:li#32:\ :al=\E[1L:cd=\E[J:ce=\E[K:cl=\E[;H\E[2J:\ :cm=\E[%i%d;%dH:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[1M:\ :do=^J:ei=\E[4l:ho=\E[H:im=\E[4h:kd=\E[B:ke=\E[?1h:\ :kl=\E[D:kr=\E[C:ks=\E[?1l:ku=\E[A:mb=\E[5m:md=\E[1m:\ :me=\E[m:nd=\E[C:rc=\E8:sc=\E7:se=\E[27m:so=\E[7m:\ :ta=\E[2I:te=\E[1;1H\E[0J\E[?6h\E[?1l:\ :ti=\E%\E!1\E[1;32r\E[?6l\E>:ue=\E[m:up=\E[A:\ :us=\E[4m: # t500 is a local entry for the oddball Tek 500 owned by Fluke # Labs # t500|Tek series 500:\ :am:bw:\ :co#80:li#25:\ :bl=^G:cl=\005:cm=\E=%+ %+ :cr=^M:do=^J:ho=^T:le=^H:\ :sf=^J: # I added the is string - straight Unix has ESC ; in the login # string which sets a ct8500 into monitor mode (aka 4025 snoopy # mode). The is string here cleans up a few things (but not # everything). # ct8500|tektronix ct8500:\ :am:bw:da:db:\ :co#80:li#25:\ :al=\E^L:bl=^G:bt=\E^I:cd=\E^U:ce=\E^T:cl=\E^E:\ :cm=\E|%+ %+ :cr=^M:dc=\E^]:dl=\E^M:do=^J:ei=:\ :ic=\E^\:im=:is=\037\EZ\Ek:le=^H:me=\E :nd=\ES:\ :se=\E :sf=^J:so=\E$:sr=\E^A:ta=^I:ue=\E :up=\ER:\ :us=\E!: # Tektronix 4205 terminal. # # am is not defined because the wrap around occurs not when the char. # is placed in the 80'th column, but when we are attempting to type # the 81'st character on the line. # # Bold, dim, and standout are simulated by colors and thus not allowed # with colors. The tektronix color table is mapped into the RGB color # table by setf/setb. All colors are reset to factory specifications by oc. # The initc cap uses RGB notation to define colors. for arguments 1-3 the # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub- # interval then maps into pre-defined value. # (untranslatable capabilities removed to fit entry within 1023 bytes) # WARNING: this entry, 1264 bytes long, may core-dump older termcap libraries! tek4205|4205|tektronix 4205:\ :cc:mi:ms:\ :Co#8:NC#49:co#80:it#8:li#30:pa#63:\ :AL=\E[%dL:DO=\E[%dB:IC=\E[%d@::LE=\E[%dD:RI=\E[%dC::\ ::UP=\E[%dA:\ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ :ae=^O:al=\E[1L:as=^N:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[J:\ :ce=\E[K:cl=\E[2J\E[H:cm=\E[%i%d;%dH:cr=^M:ct=\E[1g:\ :dc=\E[1P:dl=\E[1M:do=\E[B:eA=\E)0:ec=\E%dX:ei=\E[4l:\ :ho=\E[H:i1=\E%!0\ETM1\E%!1\E[0m:im=\E[4h:k0=\EOA:\ :k1=\EOB:k2=\EOC:k3=\EOD:k4=\EP:k5=\EQ:k6=\ER:k7=\ES:\ :kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:\ :mb=\E[5m:md=\E[=7;<4m:me=\E[=0;<1m\E[24;25;27m\017:\ :mh=\E[=1;<6m:mk=\E[=6;<5:mr=\E[7m:nd=\E[C:\ :oc=\E%!0\n\ETFB0\n0000\n1F4F4F4\n2F400\n30F40\n4A4C<F4\n50F4F4\n6F40F4\n7F4F40\n\E%!1:\ :op=\E[39;40m:se=\E[=0;<1m:sf=\ED:so=\E[=2;<3m:\ :sr=\EM:ta=^I:ti=\E%%!1\E[?6l\E[2J:ue=\E[24m:up=\E[A:\ :us=\E[4m: #### Teletype (tty) # # These are the hardcopy Teletypes from before AT&T bought the company, # clattering electromechanical dinosaurs in Bakelite cases that printed on # pulpy yellow roll paper. If you remember these you go back a ways. # Teletype-branded VDTs are listed in the AT&T section. # # The earliest UNIXes were designed to use these clunkers; nroff and a few # other programs still default to emitting codes for the Model 37. # tty33|model 33 teletype:\ :hc:os:xo:\ :co#72:\ :bl=^G:cr=^M:do=^J:sf=^J: tty35|model 35 teletype:\ :tc=tty33: tty37|model 37 teletype:\ :bs:hc:os:xo:\ :bl=^G:cr=^M:do=^J:hd=\E9:hu=\E8:le=^H:sf=^J:up=\E7: # There are known to be at least three flavors of the tty40, all seem more # like IBM half duplex forms fillers than ASCII terminals. They have lots of # awful braindamage, such as printing a visible newline indicator after each # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is # braindamaged but has hope and is described here. The 40-4 is a 3270 # lookalike and beyond hope. The terminal has visible bell but I don't know # it - it's null here to prevent it from showing the BL character. # There is an \EG in :nl: because of a bug in old vi (if stty says you have # a "newline" style terminal (-crmode) vi figures all it needs is nl # to get crlf, even if :cr: is not ^M.) # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr) tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2:\ :xo:\ :co#80:li#24:\ :al=\EL:cd=\EJ:cl=\EH\EJ:cr=\EG:ct=\EH\E2:dc=\EP:\ :dl=\EM:do=\EB:ei=:ho=\EH:ic=\E^:im=:kb=^]:kl=^H:\ :le=^H:nd=\EC:pf=^T:po=\022:r2=\023\ER:se=\E4:sf=\ES:\ :so=\E3:sr=\ET:st=\E1:ta=\E@:up=\E7: tty43|model 43 teletype:\ :am:bs:hc:os:xo:\ :co#132:\ :bl=^G:cr=^M:do=^J:kb=^H:le=^H:sf=^J: #### Tymshare # scanset|sc410|sc415|Tymshare Scan Set:\ :am:bw:ms:\ :co#80:li#24:\ :ac=l<m-k4j%q\\\054x5:ae=^O:as=^N:bl=^G:cd=\EJ:\ :ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :cr=^M:do=^J:ho=\EH:\ :kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=^I:pf=\E;0:\ :po=\E;0:ps=\E;3:r1=\E>:rc=^C:sc=^B:sf=^J:up=^K: scanset-n|Tymshare Scan Set in 40 col mode:\ :r2=\E<:tc=scanset: #### Volker-Craig (vc) # # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time # every other linefeed. vc303a|vc403a|volker-craig 303a:\ :am:bs:ns:\ :co#80:li#24:\ :bl=^G:ce=\026:cl=\030:cr=^M:do=^J:ho=\031:kd=^J:\ :kl=^H:kr=^U:ku=^Z:le=^H:ll=^P:nd=^U:up=^Z: vc303|vc103|vc203|volker-craig 303:\ :am:bs:ns:\ :co#80:li#24:\ :bl=^G:cl=\014:cr=^M:do=^J:ho=\013:kd=^J:kl=^H:kr=^I:\ :ku=^N:le=^H:ll=\017W:nd=^I:up=^N: # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr) vc404|volker-craig 404:\ :am:bs:\ :co#80:li#24:\ :bl=^G:cd=\027:ce=\026:cl=\030:cm=\020%+ %+ :cr=^M:\ :do=^J:ho=\031:kd=^J:kl=^H:kr=^U:ku=^Z:le=^H:nd=^U:\ :sf=^J:up=^Z: vc404-s|volker-craig 404 w/standout mode:\ :do=^J:se=^O:so=^N:tc=vc404: # (vc404-na: removed obsolete ":ma@:" -- esr) vc404-na|volker-craig 404 w/no arrow keys:\ :kr@:ku@:tc=vc404: vc404-s-na|volker-craig 404 w/standout mode and no arrow keys:\ :se=^O:so=^N:tc=vc404-na: # From: <wolfgang@cs.sfu.ca> vc414|vc414h|Volker-Craig 414H in sane escape mode.:\ :am:bs:\ :co#80:li#24:\ :al=\E\032:cd=\E^X:ce=10\E\017:cl=\E\034:dc=\E3:\ :do=\E^K:ei=:ic=\E\072:im=:k0=\EA:k1=\EB:k2=\EC:\ :k3=\ED:k4=\EE:k5=\EF:k6=\EG:k7=\EH:kd=\E^K:kh=\E^R:\ :kl=^H:kr=^P:ku=\E^L:l0=PF1:l1=PF2:l2=PF3:l3=PF4:\ :l4=PF5:l5=PF6:l6=PF7:l7=PF8:nd=^P:se=\E^_:so=\E^Y:\ :up=\E^L: vc414h-noxon:\ :cm=\E\021%r%.%.:dl=\E\023:ho=\E^R:tc=vc414h: vc415|volker-craig 415:\ :cl=^L:tc=vc404: ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS # #### IBM PC and clones # # The pcplot IBM-PC terminal emulation program is really messed up. It is # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly, # doesn't support scrolling regions, ignores add line commands, and ignores # delete line commands. Consequently, the resulting behavior looks like a # crude adm3a-type terminal. # Steve Jacobson 8/85 pcplot:\ :xn@:\ :cs@:rc@:sc@:tc=vt100: # (kaypro: removed obsolete ":ma=^K^P:" -- esr) kaypro|kaypro2|kaypro II:\ :am:bs:\ :co#80:li#24:\ :cl=1\032:cm=\E=%+ %+ :ho=^^:kd=^J:kl=^H:kr=^L:ku=^K:\ :nd=^L:up=^K: sanyo55|sanyo|sanyo mbc-55x pc compatible:\ :am:bs:\ :co#80:li#25:\ :cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:nd=\E[C:\ :se=\E[m:so=\E[7m:ue=\E[m:up=\E[A:us=\E[4m: # From IBM, Thu May 5 19:35:27 1983 ibmpc|ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS):\ :am:\ :co#80:li#24:\ :bl=^G:cl=^L^K:cr=^M^^:do=^J:ho=^K:im=\200R:kd=^_:\ :le=^]:nd=^\:sf=\n:up=^^: #### Apple # # apple -- works with an Apple ][+ that is equipped with a Videx 80 column # card in slot 3. A special routine must be installed at the apple end to # enable scroll down, here indicated with a ^U. The Videx card must have # inverse char set, which is used as standout. apple|apple-v80|Apple][+ w/Videx80 & custom scroll down:\ :am:xn:\ :co#80:li#24:\ :ae=^Z3:as=^Z2:bl=^G:cd=\013:ce=\035:cl=\014:\ :..cm=\r\036%r%p1%{32}%+%c%p2%{32}%+%c$<6>:cr=^M:\ :do=^J:ho=\031:le=\010:nd=^\:se=^Z2:sf=^J:so=^Z3:\ :sr=^P:up=^_: # (appleII: mapped ":pt:" to default tabs -- esr) appleII|apple ii plus:\ :am:bs:pt:\ :co#80:li#24:\ :cd=^K:ce=^]:cl=^L:cm=\036%r%+ %+ :do=^J:ho=\E^Y:\ :is=\024T1\016:kd=^J:kr=^U:nd=^\:se=^N:so=^O:up=^_:\ :vb=\024G1\024T1:ve=^TC2:vs=^TC6: # Originally by Gary Ford 21NOV83 # From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985 apple-80|apple II with smarterm 80 col:\ :am:bs:bw:\ :co#80:li#24:\ :bt=^R:cd=10*\013:ce=10\035:cl=10*\014:\ :cm=\036%r%+ %+ :cr=10*\r:do=^J:ho=^Y:le=^H:nd=^\:\ :up=^_: apple-soroc|apple emulating soroc 120:\ :am:\ :co#80:li#24:\ :bl=^G:cd=\EY:ce=\ET:cl=\E*:cm=\E=%+ %+ :cr=^M:do=^J:\ :ho=^^:kd=^J:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:sf=^J:\ :up=^K: # From Peter Harrison, Computer Graphics Lab, San Francisco # ucbvax!ucsfmis!harrison .....uucp # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA # "These two work. If you don't have the inverse video chip for the # Apple with videx then remove the so and se fields." # (DaleApple: mapped ":pt:" to default tabs -- esr) DaleApple|Apple with videx videoterm 80 column board with inverse video:\ :am:bs:pt:xn:\ :co#80:li#24:\ :cd=^K:ce=^]:cl=300\014:cm=\036%r%+ %+ :do=^J:ho=^Y:\ :kd=^J:kh=^Y:kl=^H:kr=^U:le=^H:nd=^\:se=^Z2:so=^Z3:\ :up=^_: # (lisa: this had forms-drawing capabilities # :GV=`:GH=a:G1=c:G2=f:G3=e:G4=d:GU=u:GD=s:GC=b:GL=v:GR=t: # I renamed GS/GE/CO/CF, mapped ":pt:" to default tabs -- esr) lisa|apple lisa console display, black on white:\ :am:bs:eo:ms:pt:\ :co#88:li#32:\ :ae=\E[10m:al=\E[L:as=\E[11m:cd=\E[J:ce=\E[K:cl=^L:\ :cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:do=\E[B:ei=:ho=\E[H:\ :ic=\E[@:im=:is=\E>\E[0m\014:kb=^H:kd=\E[B:kl=\E[D:\ :kr=\E[C:ku=\E[A:nd=\E[C:se=\E[m:so=\E[7m:ue=\E[m:\ :up=\E[A:us=\E[4m:vi=\E[5h:vs=\E[5l: liswb|apple lisa console display, white on black:\ :is=\E>\E[0;7m\014:se=\E[0;7m:so=\E[0m:ue=\E[0;7m:\ :us=\E[4m:tc=lisa: mac|macintosh|Macintosh with MacTerminal:\ :xn:\ :dN#30:\ :al=20\E[L:dc=7\E[P:dl=20\E[M:ei=:ic=9\E[@:im=:ip=7:tc=vt100: #### Radio Shack/Tandy # # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7". # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr) # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90 coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II:\ :am:bs:\ :co#80:it#8:li#24:\ :al=^_0:bl=^G:cd=^K:ce=^D:cl=5*\014:cm=2\002%r%+ %+ :\ :dl=^_1:do=^J:ho=^A:kd=^J:kl=^H:kr=^I:ku=^L:mb=^_":\ :md=\E\072^A:me=\037!\E\072\200:mr=^_ :nd=^F:se=^_!:\ :so=^_ :ue=^_#:up=^I:us=^_":ve=^E!:vi=^E : trs80|trs-80|radio shack trs-80 Model I:\ :am:bs:\ :co#64:li#16:\ :bl=^G:cr=^M:do=^J:le=^H:sf=^J: # (trs2: mapped ":pt:" to default tabs; removed obsolete ":nl=^_:" -- esr) trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M:\ :am:bs:ms:pt:\ :co#80:li#24:\ :al=^D:bl=^G:cd=^B:ce=^A:cl=^L:cm=\EY%+ %+ :cr=^M:\ :dl=^K:do=^_:ho=^F:kb=^H:kd=^_:kl=^\:kr=^]:ku=^^:\ :nd=^]:se=^O:sf=^J:so=^N:up=^^: # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu> # (This had unknown capabilities # :GV=s:GH=u:GU=e:GD=c:G1=`:G2=_:G3=b:G4=a:\ # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\ # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@: # I renamed GS/GE,also deleted the unnecessary ":kn#2:", ":sg#0:" # and mapped ":pt:" to default tabs -- esr) trs16|trs-80 model 16 console:\ :am:bs:pt:\ :co#80:li#24:sg#0:\ :ae=\ERg:al=\EL:as=\ERG:bl=^G:cd=\EJ:ce=\EK:cl=^L:\ :cm=\EY%+ %+ :cr=^M:dc=\EQ:dl=\EM:do=\EB:ei=:ho=\EH:\ :ic=\EP:im=:k0=^A:k1=^B:k2=^D:k3=^L:k4=^U:k5=^P:\ :k6=^N:k7=^S:kb=^H:kd=\EB:kh=^W:kl=\ED:kr=\EC:ku=\EA:\ :l0=f1:l1=f2:l2=f3:l3=f4:l4=f5:l5=f6:l6=f7:l7=f8:\ :le=^H:nd=\EC:pf=\E]+:po=\E]=:se=\ER@:sf=^J:so=\ERD:\ :ta=^I:up=\EA:ve=\ERC:vi=\ERc: # From: Suk Lee <..!{decvax,linus,allegra,ihnp4}!utcsrgv!spoo> # (civis/cnorm added from SCO description) trs100|Radio Shack Model 100:\ :am:bs:xt:\ :co#40:li#8:\ :al=\EL:bl=^G:cd=\EJ:ce=\EK:cl=\EE:cm=\EY%+ %+ :\ :cr=^M:dl=\EM:do=^J:ho=\EH:kb=^H:kd=^_:kl=^]:kr=^\:\ :ku=^^:le=^H:nd=\EC:se=\Eq:sf=^J:so=\Ep:up=\EA:\ :ve=\EP:vi=\EQ: trs200|Tandy 200:\ :am:xt:\ :co#40:li#16:\ :al=\EL:bl=^G:cd=^L:ce=\EK:cl=\EE:cm=\EY%+ %+ :cr=^M:\ :dl=\EM:do=^_:kd=^_:kl=^]:kr=^\:ku=^^:le=^H:nd=^\:\ :se=\Eq:sf=^J:so=\Ep:up=\EA: trs600|Tandy Model 600:\ :am:\ :co#80:li#15:\ :bl=^G:cl=\EH\EE:cm=\EY%+ 040%+ :cr=^M:do=\EB:kd=\EB:\ :kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:sf=^J:ta=^I:\ :up=\EA: #### Atari ST # # From: Simson L. Garfinkel <simsong@media-lab.mit.edu> # (atari: mapped ":pt:" to default tabs -- esr) atari|atari st:\ :am:bs:pt:\ :co#80:li#25:\ :al=\EL:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :dl=\EM:\ :do=\EB:kd=\EB:kl=\ED:kr=\EC:ku=\EA:nd=\EC:se=\Eq:\ :so=\Ep:sr=\EI:up=\EA: # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu> uniterm|uniterm49|UniTerm VT220 emulator, 49 lines:\ :li#49:\ :is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H:tc=vt220: #### Commodore Business Machines # # Formerly located in West Chester, PA; went spectacularly bust in 1994 # after years of shaky engineering and egregious mismanagement. Made one # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64, # C-128, VIC-20). The C-64 is said to have been the most popular machine # ever (most units sold); they can still be found gathering dust in closets # everywhere. # # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90 # Added a few more entries, converted caret-type control sequence (^x) entries # to '\0xx' entries since a couple of people mentioned losing '^x' sequences. # # :as:, :ae: Support for alternate character sets. # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible. # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept) # This one appears to fix a problem I always had with a line ending # at 'width+1' (I think) followed by a blank line in vi. The blank # line tended to disappear and reappear depending on how the screen # was refreshed. Note that this is probably needed only if you use # something like a Dnet Fterm with the window sized to some peculiar # dimension larger than 80 columns. # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;' # (amiga: removed obsolete ":kn#10:" -- esr) amiga|Amiga ANSI:\ :am:bs:bw:xn:\ :co#80:li#24:\ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\ :LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\ :ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:\ :cl=\E[H\E[J:cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:do=\E[B:\ :ei=:ho=\E[H:ic=\E[@:im=:is=\E[20l:k0=\E9~:k1=\E0~:\ :k2=\E1~:k3=\E2~:k4=\E3~:k5=\E4~:k6=\E5~:k7=\E6~:\ :k8=\E7~:k9=\E8~:kb=^H:kd=\EB:kl=\ED:kr=\EC:ku=\EA:\ :le=\E[D:mb=\E[7;2m:md=\E[1m:me=\E[0m:mh=\E[2m:\ :mk=\E[8m:mr=\E[7m:nd=\E[C:rs=\Ec:se=\E[0m:sf=\E[S:\ :so=\E[7m:sr=\E[T:ue=\E[0m:up=\E[A:us=\E[4m:vb=^G:\ :ve=\E[ p:vi=\E[0 p: # The legendary home of B1FF... vic20|vic|VIC-20 Personal Computer:\ :am:\ :co#22:li#20:\ :bl=^G:cl=^K^L:cr=^M:do=^J:ho=^L:nd=^\:sf=^J:up=^^: #### CompuColor # # These were consoles for a line of Z80-based micros dating from around 1977. # # These compucolors appear similar, but they at least have different # sized screens. I don't know what's going on here. # (compucolor: removed obsolete ":bc=^Z:" -- esr) compucolor|isc8001|intecolor:\ :am:\ :co#80:li#47:\ :al=\EU:bl=^G:cl=\014:cr=\r:dl=\EV\034:do=\n:\ :ei=\022\EK:im=\023\EQ:kd=^J:kh=^H:kl=^Z:kr=^Y:ku=^\:\ :le=\032:nd=\031:sf=\n:ue=\022:up=\034:us=\021: # (compucolor2: mapped ":pt:" to default tabs, # removed obsolete ":bc=^Z:" -- esr) compucolor2|compucolorII:\ :am:pt:\ :co#64:li#32:\ :bl=^G:cl=^L:cm=\003%r%.%.:cr=^M:do=^J:ho=^H:le=^Z:\ :nd=^Y:sf=^J:ta=^I:up=^\: #### Exidy Sorcerer # # (exidy: mapped ":pt:" to default tabs -- esr) exidy|exidy2500|exidy sorcerer as dm2500:\ :am:\ :co#64:li#30:\ :al=^P^J^X:bl=^G:cd=^X:ce=^W:cl=^^:\ :..cm=\014%p2%'`'%^%c%p1%'`'%^%c:cr=^M:dc=^H:\ :dl=^P^Z^X:dm=^P:do=^J:ei=^X:ho=^B:ic=^\:im=^P:le=^H:\ :nd=^\:se=^X:sf=^J:so=^N:ta=^I:up=^Z: ex3000:\ :co#80:li#24:\ :bl=^G:cr=^M:do=^J:ho=^Q:sf=^J: # This came from the comp ctr who got it from some user. Smart indeed! # (sexidy: looks like an Exidy Sorcerer in some bizarre emulation mode; # removed obsolete ":ma=^x^J:"; removed obsolete ":bc=^A:"; removed # incorrect (and overridden) ":le=^H:" -- esr) sexidy|exidy smart:\ :bs:\ :co#64:li#24:\ :bl=^G:cl=^L:cr=^M:do=^J:ho=^Q:kd=^S:le=^A:nd=^S:\ :sf=^J:up=^W: #### Osborne # # Thu Jul 7 03:55:16 1983 # # As an aside, be careful; it may sound like an anomaly on the # Osborne, but with the 80-column upgrade, it's too easy to # enter lines >80 columns! # # I've already had several comments... # The Osborne-1 with the 80-col option is capable of being # 52,80, or 104 characters wide; default to 80 for compatibility # with most systems. # # The tab is destructive on the Ozzie; make sure to 'stty -tabs'. ozzie|osborne|osborne1|osborne 1:\ :ms:ul:xt:\ :co#104:li#24:\ :al=\EE:bl=^G:ce=\ET:cl=^Z:cm=\E=%+ %+ :cr=^M:dc=\EW:\ :dl=\ER:do=^J:ei=:ic=\EQ:im=:kd=^J:kl=^H:kr=^L:ku=^K:\ :le=^H:nd=^L:se=\E(:sf=^J:so=\E):ue=\Em:up=^K:us=\El: #### Console types for UNIX clones # # According to the Coherent 2.3 manual, the PC console is similar # to a z19. The differences seem to be (1) 25 lines, (2) no status # line, (3) standout is broken, (4) ins/del line is broken, (5) # has blinking and bold. pc-coherent|pcz19|coherent|IBM PC console running Coherent:\ :am:mi:\ :co#80:it#8:li#25:\ :bl=^G:cd=\EJ:ce=\EK:cl=\EE:cm=\EY%+ %+ :cr=^M:\ :dc=\EN:do=\EB:ei=\EO:ho=\EH:im=\E@:kb=^H:kd=\EB:\ :kh=\EH:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:se=\Eq:\ :sf=^J:so=\Ep:sr=\EI:ta=^I:up=\EA: # According to the Venix 1.1 manual, the PC console is similar # to a DEC vt52. Differences seem to be (1) arrow keys send # different strings, (2) enhanced standout, (3) added insert/delete line. # Note in particular that it doesn't have automatic margins (am). # There are other keys (f1-f10, pgup, pgdn, backtab, insch, delch) # not described here. pc-venix|venix|IBM PC console running Venix:\ :co#80:it#8:li#25:\ :al=\EL:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :\ :cr=^M:dl=\EM:do=^J:kb=^H:kd=\EP:kh=\EG:kl=\EK:\ :kr=\EM:ku=\EH:le=^H:nd=\EC:sf=^J:sr=\EI:ta=^I:\ :up=\EA: #### Miscellaneous microcomputer consoles # # If you know anything more about any of these, please tell me. # I don't know which, if either, of these sols to believe. # ^S is an arrow key! Boy is this guy in for a surprise... sol|sol1|sol terminal computer:\ :am:\ :co#64:li#16:\ :bl=^G:cl=^K:cm=\E\021%.\E\022%.:cr=^M:do=^J:ho=^N:\ :kd=^Z:kl=^A:kr=^S:ku=^W:le=^H:nd=^S:sf=^J:up=^W: sol2|sol terminal computer:\ :am:mi:xn:\ :co#64:li#16:\ :al=20\EL:bl=^G:cd=20\EJ:ce=\EK:cl=20\EE:\ :cm=\EY%+ %+ :cr=^M:dc=\EN:dl=20\EM:do=^J:ei=\EO:\ :ho=\EH:im=\E@:kd=\ED:kh=\EH:kl=\EL:kr=\ER:ku=\EU:\ :le=^H:nd=\EC:sf=\n:ta=^I:up=\EA:ve=\EX:vs=^N^Lv: # basis from Peter Harrison, Computer Graphics Lab, San Francisco # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr) basis|BASIS108 computer with terminal translation table active:\ :cd=\EY:ce=\ET:cl=300\E*:do=5000\n:kb=^H:kd=^J:kl=^H:\ :kr=^L:ku=^K:se=\E):so=\E(:tc=adm3a: # luna's BMC terminal emulator luna|luna68k|LUNA68K Bitmap console:\ :co#88:li#46:\ :tc=ansi-mini: microkit|mkt|microkit terminal computer:\ :am:mi:xn:\ :co#40:li#23:\ :al=\El:bl=^G:cd=\Ej:ce=\Ek:cl=\Ee:cm=\Ey%+ %+ :\ :cr=^M:dc=\En:dl=\Em:do=^J:ei=\Eo:ho=\Eh:im=\E@:\ :kd=\Ed:kh=\Eh:kl=\El:kr=\Er:ku=\Eu:le=^H:nd=\Ec:\ :sf=^J:ta=^I:up=\Ea:ve=\Ex:vs=\016\014zv: megatek|pegasus workstation terminal emulator:\ :am:os:\ :co#83:li#60:\ : # The Xerox 820 was an early Z80 micro that went nowhere (I think) xerox820|x820|Xerox 820:\ :am:\ :co#80:li#24:\ :bl=^G:cd=^Q:ce=^X:cl=1^Z:cm=\E=%+ %+ :cr=^M:do=^J:\ :ho=^^:le=^H:nd=^L:sf=^J:up=^K: #### Videotex and teletext # # standard-issue France Telecom minitel terminal (made by Philips) # (m2-nam: had unknown ":zd=\E[1m:zb=\E[5m:zc=lkmjqxtuwvn:"; # also deleted unnecessary ":ug#0:sg#0:"; mapped ":pt:" to "" -- esr) m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel:\ :am@:bs:pt:xn:\ :co#80:it#8:li#24:\ :ae=\E(B:al=\E[L:as=\E(0:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\ :cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:ei=\E[4l:ho=\E[H:\ :im=\E[4h:ip=7:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:\ :k3=\EOR:k4=\EOS:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:\ :ku=\E[A:nd=\E[C:se=\E[m:sf=^J:so=\E[7m:sr=\EM:\ :ue=\E[m:up=\E[A:us=\E[4m: # From: Joel Rubin <jmrubin@coral.berkeley.edu> # This is a preliminary TERMCAP for VIDTEX, a terminal program sold by # Compuserve. Line and column numbers are computer-dependent (I have a # Commodore '64); you should use the meta-B option to shut off clean-breaking # of lines. No key codes included since some of them are programmable and # most are machine-specific. Works on vi if you don't use clean-breaking. # Very similar to the IBM 3101 termcap. Escape-D used for backspace because # control-H is destructive backspace. There seem to be a few weirdnesses # (especially at the beginning of a wrapped line), and the cursor does not, # unfortunately, flash. # (vid: mapped ":pt:" to default tabs; changed :bc: to :le: -- esr) vid|vidtex|Compuserve vidtex program:\ :am:pt:\ :co#40:li#25:\ :cd=\EJ:ce=\EK:cl=^L:cm=\EY%+ %+ :ho=\EH:le=\ED:\ :nd=\EC:up=\EA: # This (inherited from the Emacs termcap.dat file) is probably *way* obsolete! rsvidtx|Radio Shack VIDEOTEX:\ :co#32:li#16:\ :cd=\EJ:ce=\EK:cl=\EH\EJ:..cm=\EY%+ %+ :cr=^M:do=^J:\ :kb=^H:kd=^J:kl=^H:nd=\EC:nw=^M^J:sf=^J:ta=^I:up=\EA: ######## OBSOLETE VDT TYPES # # These terminals are *long* dead -- these entries are retained for # historical interest only. #### AED # # Advanced Electronic Devices made its name manufacturing super-expensive # vector-graphics displays and frame buffers in the late 1970s. They used # to be in Sunnyvale CA 94086 on Pastoria Avenue. They're long gone now. # # From: Giles Billingsley <gilesb%ucbcad@berkeley.edu> # rewritten 8/82 for newer AEDs and better operation of vi, etc. # (bel/cr/cub1/cud1/ind added from SCO entry, which doesn't have db or the # humongous is2, thus they are commented out here -- esr) aed|AED|aed512|AED512|aed 512:\ :bs:\ :co#64:li#40:\ :bl=^G:cl=^L:cr=^M:do=^J:le=^H:nd=\Ei0800\001:\ :se=\E[00C80\001:\ :sf=\E;1100\072004=000200??;1300'\200\001\n\E\072004=0002??00;1200\001\n:\ :so=\E\07200>8000140[80C00\001:\ :te=\E\07200>8000100{804<0??00001000L80\072004=000200??\001:\ :ti=\E\07200>8000140{<04<0??00001010L<0\072004=0002??00\001:\ :uc=\Ei???>l0800i0102\001:ue=\E\07200>8000100\001:\ :up=^K:us=\E\07200>8000140\001:\ :vb=\EK0001??0000K0001202080\001:\ :ve=\E\072004=000200??\001: aed-ucb|AED-UCB|aed512-ucb|AED512-UCB|aed 512 w/o UCB ROM:\ :bs:db:\ :co#64:li#40:\ :cl=^L:if=/usr/share/tabset/aed512:nd=\Ei0800\001:\ :se=\E[00C80\001:so=\E\07200>8000140[80C00\001:\ :te=\E\07200>8000100{804<0??00001000L80\072004=000200??\001:\ :ti=\E\07200>8000140{<04<0??00001010L<0\072004=0002??00\001:\ :uc=\Ei???>l0800i0102\001:ue=\E\07200>8000100\001:\ :up=^K:us=\E\07200>8000140\001:\ :vb=\EK0001??0000K0001202080\001:\ :ve=\E\E\E\E\E\E\E\072004=000200??\001: #### Amtek Business Machines # # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y", # but these caps were commented out in 8.3; also, removed overridden # ":do=^J:" -- esr) abm80|amtek business machines 80:\ :am:bs:bw:\ :co#80:li#24:\ :al=\E^Z:bt=^T:cd=\E^X:ce=\E^O:cl=\E^\:\ :cm=\E\021%r%+ %+ :dl=\E^S:do=\E^K:ho=\E^R:le=^H:\ :nd=^P:up=\E^L: #### Bell Labs blit terminals # # These were AT&T's official entries. # blit|jerq|blit running teletype rom:\ :am:eo:ul:xo:\ :co#87:it#8:li#72:\ :AL=\EF%+ :DC=\Ee%+ :DL=\EE%+ :IC=\Ef%+ :al=\EF!:\ :bl=^G:ce=\EK:cl=^L:cm=\EY%r%+ %+ :cr=^M:dc=\Ee!:\ :dl=\EE!:do=^J:ei=:ic=\Ef!:im=:k1=\Ex:k2=\Ey:k3=\Ez:\ :kb=^H:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=\ED:nd=\EC:\ :sf=^J:ta=^I:up=\EA: cbblit|fixterm|blit running columbus code:\ :co#88:\ :cd=\EJ:ei=\ER:ic@:im=\EQ:pO=\EP%03:pf=^T:po=^R:\ :se=\EV!:so=\EU!:ue=\EV":us=\EU":vb=\E^G:tc=blit: oblit|ojerq|first version of blit rom:\ :am:da:db:eo:mi:ul:xo:\ :co#88:it#8:li#72:\ :AL=\Ef%+ :DL=\Ee%+ :al=\EF:bl=^G:cd=\EJ:ce=\EK:\ :cl=^L:cm=\EY%r%+ %+ :cr=^M:dc=\EO:dl=\EE:do=^J:\ :ei=\ER:im=\EQ:kb=^H:le=\ED:nd=\EC:sf=^J:ta=^I:\ :up=\EA:vb=\E^G: daleblit|daleterm|blit running Dale DeJager's ROM:\ :da@:db@:\ :kd=\EB:kl=\ED:kr=\EC:ku=\EA:se=\EV!:so=\EU!:ue=\EV":\ :us=\EU":tc=oblit: #### Bolt, Beranek & Newman (bbn) # # The BitGraph was a product of the now-defunct BBN Computer Corporation. # The parent company, best known as the architects of the Internet, is # still around. # # Entries for the BitGraph terminals. The problem # with scrolling in vi can only be fixed by getting BBN to put # smarter scroll logic in the terminal or changing vi or padding # scrolls with about 500 ms delay. # # I always thought the problem was related to the terminal # counting newlines in its input buffer before scrolling and # then moving the screen that much. Then vi comes along and # paints lines in on the bottom line of the screen, so you get # this big white gap. bitgraph|bbn bitgraph:\ :tc=bg3.10rv: bg3.10rv|bgrv|bbn bitgraph (reverse video):\ :tc=bg2.0rv: bg3.10nv|bgnv|bbn bitgraph (normal video):\ :tc=bg2.0nv: bg3.10|bgn|bbn bitgraph (no init):\ :tc=bg2.0: bg2.0rv|bbn bitgraph (reverse video):\ :is=\E>\E[?5h\E[?7h:vb=\E[?5l\E[?5h:tc=bg2.0: bg2.0nv|bbn bitgraph (normal video):\ :is=\E>\E[?5l\E[?7h:vb=\E[?5h\E[?5l:tc=bg2.0: bg2.0|bbn bitgraph (no init):\ :xn:\ :co#85:li#64:\ :al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\ :cm=%i\E[%d;%dH:cr=^M:cs=\E[%i%d;%dr:dl=\E[M:do=\E[B:\ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kd=\E[B:ke=\E>:\ :kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:l1=PF1:l2=PF2:l3=PF3:\ :l4=PF4:le=^H:nd=\E[C:rc=\E8:sc=\E7:se=\E[0m:sf=\n:\ :so=\E[7m:ta=^I:up=\E[A: bg1.25rv|bbn bitgraph (reverse video):\ :is=\E>\E[?5h\E[?7h:vb=\E[?5l\E[?5h:tc=bg1.25: bg1.25nv|bbn bitgraph (normal video):\ :is=\E>\E[?5l\E[?7h:vb=\E[?5h\E[?5l:tc=bg1.25: bg1.25|bbn bitgraph:\ :co#85:li#64:\ :al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\ :cm=%i\E[%d;%dH:cr=^M:dl=\E[M:do=\E[B:k1=\EP:k2=\EQ:\ :k3=\ER:k4=\ES:kd=\EB:ke=\E>:kl=\ED:kr=\EC:ks=\E=:\ :ku=\EA:l1=PF1:l2=PF2:l3=PF3:l4=PF4:le=^H:\ :ll=\E[64;1H:nd=\E[C:se=\E[0m:sf=\n:so=\E[7m:ta=^I:\ :up=\E[A: #### Chromatics # # cg7900: Following is revised version. As I mentioned, I recompiled # curses in order to accomadate the large amount of definition. # I have put the long strings in ti/te. Ti sets up a window # that is smaller than the screen, and puts up a warning message # outside the window. Te erases the warning message, puts the # window back to be the whole screen, and puts the cursor at just # below the small window. A defined vs and ve to really turn # the cursor on and off, but I have taken this out since I don't # like the cursor being turned off when vi exits. cg7900|chromatics|chromatics 7900:\ :am:\ :co#80:li#40:\ :al=^A>2:bl=^G:cd=^Al:ce=^A`:cl=^L:\ :cm=\001M%r%d\\\054%d\\\054:cr=^M:dc=^A<1:dl=^A<2:\ :do=^J:ei=:ho=^\:ic=^A>1:im=:le=^H:ll=^A|:nd=^]:\ :se=\001C1\\\054\001c2\\\054:sf=^J:\ :so=\001C4\\\054\001c7\\\054:\ :te=\001W0\\\05440\\\05485\\\05448\\\054\014\001W0\\\0540\\\05485\\\05448\\\054\001M0\\\05440\\\054:\ :ti=\001P0\001O1\001R1\001C4\\\054\001c0\\\054\014\001M0\\\05442\\\054WARNING DOUBLE ENTER ESCAPE and \025\001C1\\\054\001c2\\\054\001W0\\\0540\\\05479\\\05439\\\054:\ :uc=\001\001_\001\200:up=^K: #### Computer Automation # ca22851|computer automation 22851:\ :am:\ :co#80:li#24:\ :bl=^G:cd=^\:ce=^]:cl=\014:cm=\002%i%.%.:cr=^M:do=^J:\ :ho=^^:kd=^W:kh=^^:kl=^U:ku=^V:le=^U:nd=^I:sf=^J:\ :up=^V: #### Cybernex # # This entry has correct padding and the undocumented "ri" capability cyb83|xl83|cybernex xl-83:\ :am:bs:\ :co#80:li#24:\ :bl=^G:cd=\020:ce=\017:cl=\014:cm=\027%+ %+ :cr=^M:\ :do=^J:ho=^K:kd=^J:kl=^H:kr=^I:ku=^N:le=^H:nd=^I:\ :sf=^J:sr=^N:up=^N: # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr) cyb110|mdl110|cybernex mdl-110:\ :am:bs:\ :co#80:li#24:\ :al=\016A\016\035:bl=^G:cd=\016@\026:ce=\016@\026:\ :cl=\030:cm=\020%+ %+ :cr=^M:dc=\016A\036:\ :dl=\016A\016\036:do=^J:ei=:ho=^Y:ic=\016A\035:im=:\ :le=^H:nd=^U:se=^NG:sf=^J:so=^NF:ta=\011:up=^Z: #### Datapoint # # Datapoint is gone. They used to be headquartered in Texas. # They created ARCnet, an Ethernet competitor that flourished for a while # in the early 1980s before 3COM got wise and cut its prices. The service # side of Datapoint still lives (1995) in the form of Intelogic Trace. # dp3360|datapoint|datapoint 3360:\ :am:bs:\ :co#82:li#25:\ :bl=^G:cd=^_:ce=^^:cl=^]^_:cr=^M:do=^J:ho=^]:le=^H:\ :nd=^X:sf=^J:up=^Z: #### DEC terminals (Obsolete types: DECwriter and vt40/42/50) # # These entries are DEC's official terminfos for its older terminals. # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support # Engineering for more information. Updated terminfos and termcaps # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps. # gt40|dec gt40:\ :os:\ :co#72:li#30:\ :bl=^G:cr=^M:do=^J:le=^H: gt42|dec gt42:\ :os:\ :co#72:li#40:\ :bl=^G:cr=^M:do=^J:le=^H: vt50|dec vt50:\ :co#80:li#12:\ :bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cr=^M:do=^J:le=^H:\ :nd=\EC:sf=^J:ta=^I:up=\EA: vt50h|dec vt50h:\ :co#80:li#12:\ :bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :cr=^M:\ :do=^J:le=^H:nd=\EC:sf=^J:sr=\EI:ta=^I:up=\EA: vt52|dec vt52:\ :co#80:it#8:li#24:\ :bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :cr=^M:\ :do=^J:kb=^H:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=^H:\ :nd=\EC:sf=^J:sr=\EI:ta=^I:up=\EA: vt61|vt-61|vt61.5:\ :co#80:li#24:\ :bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :cr=\r:\ :do=^J:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:\ :sf=\n:sr=\EI:ta=^I:up=\EA: # The gigi does standout with red! gigi|vk100|dec gigi graphics terminal:\ :am:xn:\ :co#84:li#24:\ :DO=\E[%dB:LE=\E[%r%dD:RI=\E[%dC:UP=\E[%dA:bl=^G:\ :cd=\E[J:ce=\E[K:cl=\E[;H\E[2J:cm=\E[%i%d;%dH:cr=^M:\ :do=^J:is=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h:\ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kd=\EOB:\ :ke=\E[?1l\E>:kh=\E[H:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\ :ku=\EOA:le=^H:nd=\E[C:se=\E[m:sf=^J:so=\E[7;31m:\ :sr=\EM:ta=^I:ue=\E[m:up=\E[A:us=\E[4m: # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce # a PC differentiated from the IBM clones. It was a total, ludicrous, # grossly-overpriced failure (among other things, DEC's OS didn't include # a format program, so you had to buy pre-formatted floppies from DEC at # a hefty premium!). # (pro350: mapped ":pt:" to default tabs -- esr) pro350|decpro|dec pro console:\ :bs:pt:\ :co#80:li#24:\ :ae=\EG:as=\EF:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :\ :do=\EB:ho=\EH:k0=\EE:k1=\EF:k2=\EG:k3=\EH:k4=\EI:\ :k5=\EJ:k6=\Ei:k7=\Ej:kd=\EB:kh=\EH:kl=\ED:kr=\EC:\ :ku=\EA:nd=\EC:se=\E^N:so=\E^H:sr=\EI:ue=\E^C:up=\EA:\ :us=\E^D: dw1|decwriter I:\ :hc:os:\ :co#72:\ :bl=^G:cr=^M:do=^J:le=^H:sf=^J: dw2|decwriter|dw|decwriter II:\ :hc:os:\ :co#132:\ :bl=^G:cr=^M:do=^J:kb=^H:le=^H:sf=^J: # \E(B Use U.S. character set (otherwise # => british pound !) # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v) # \E[w 10 char/in pitch # \E[1;132 full width horizontal margins # \E[2g clear all tab stops # \E[z 6 lines/in # \E[66t 66 lines/page (for \f) # \E[1;66r full vertical page can be printed # \E[4g clear vertical tab stops # \E> disable alternate keypad mode (so it transmits numbers!) # \E[%i%du set tab stop at column %d (origin == 1) # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is # a tab stop) # # The dw3 does standout with wide characters. # dw3|la120|decwriter III:\ :hc:os:\ :co#132:\ :bl=^G:cr=^M:do=^J:\ :i1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>:\ :is=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r:\ :kb=^H:le=^H:se=\E[w:sf=^J:so=\E[6w:ta=^I: dw4|decwriter IV:\ :am:hc:os:\ :co#132:\ :bl=^G:cr=^M:do=^J:is=\Ec:k0=\EOP:k1=\EOQ:k2=\EOR:\ :k3=\EOS:kb=^H:le=^H:sf=^J:ta=^I: #### Delta Data (dd) # # Untested. The cup sequence is hairy enough that it probably needs work. # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'. # There are BSD-derived termcap entries floating around for this puppy # that are *certainly* wrong. delta|dd5000|delta data 5000:\ :am:\ :co#80:li#27:\ :bl=^G:ce=^NU:cl=^NR:cm=\017%+^P%+^P:dc=^NV:do=^J:\ :ho=^NQ:le=^H:nd=^Y:sf=^J:up=^Z: #### Digital Data Research (ddr) # # (ddr: mapped ":pt:" to default tabs -- esr) ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator:\ :am:bs:pt:xn:\ :co#80:li#24:vt#3:\ :cd=50\E[J:ce=3\E[K:cl=50\E[;H\E[2J:cm=5\E[%i%d;%dH:\ :cs=\E[%i%d;%dr:do=^J:ho=\E[H:is=\E[1;24r\E[24;1H:\ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kb=^H:kd=\E[B:\ :ke=\E[?1l\E>:kl=\E[D:kr=\E[C:ks=\E[?1h\E=:ku=\E[A:\ :le=^H:mb=2\E[5m:md=2\E[1m:me=2\E[m:mr=2\E[7m:\ :nd=2\E[C:rc=\E8:rf=/usr/share/lib/tabset/vt100:\ :rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\E7:se=\E[m:\ :sf=5\ED:so=\E[7m:sr=5\EM:ue=2\E[m:up=2\E[A:\ :us=2\E[4m: #### General Electric (ge) # terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200:\ :hc:os:\ :co#120:\ :bl=^G:cr=^M:do=^J:sf=^J: #### Heathkit/Zenith # h19-a|heath-ansi|heathkit-a|heathkit h19 ansi mode:\ :am:mi:ms:\ :co#80:it#8:li#24:\ :ae=\E[11m:al=\E[1L:as=\E[10m:bl=^G:cd=\E[J:ce=\E[K:\ :cl=\E[2J:cm=\E[%i%d;%dH:cr=^M:dc=\E[1P:dl=\E[1M:\ :do=\E[1B:ei=\E[4l:ho=\E[H:im=\E[4h:\ :is=\E<\E[>1;2;3;4;5;6;7;8;9l\E[0m\E[11m\E[?7h:\ :k1=\EOS:k2=\EOT:k3=\EOU:k4=\EOV:k5=\EOW:k6=\EOP:\ :k7=\EOQ:k8=\EOR:kb=^H:kd=\E[1B:kh=\E[H:kl=\E[1D:\ :kr=\E[1C:ku=\E[1A:l6=blue:l7=red:l8=white:le=^H:\ :nd=\E[1C:se=\E[0m:sf=^J:so=\E[7m:sr=\EM:ta=^I:\ :up=\E[1A:ve=\E[>4l:vs=\E[>4h: h19-bs|heathkit w/keypad shifted:\ :ke=\Eu:ks=\Et:tc=h19-b: h19-smul|heathkit w/keypad shifted/underscore cursor:\ :ke=\Eu:ks=\Et:tc=h19-u: h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19:\ :am:es:hs:mi:ms:\ :co#80:it#8:li#24:\ :ae=\EG:al=\EL:as=\EF:bl=^G:cd=\EJ:ce=\EK:cl=\EE:\ :cm=\EY%+ %+ :cr=^M:dc=\EN:dl=\EM:do=\EB:ei=\EO:\ :fs=\Ek\Ey5:ho=\EH:im=\E@:k1=\ES:k2=\ET:k3=\EU:\ :k4=\EV:k5=\EW:k6=\EP:k7=\EQ:k8=\ER:kb=^H:kd=\EB:\ :kh=\EH:kl=\ED:kr=\EC:ku=\EA:l6=blue:l7=red:l8=white:\ :le=^H:nd=\EC:se=\Eq:sf=^J:so=\Ep:sr=\EI:ta=^I:\ :ts=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo:up=\EA:ve=\Ey4:\ :vs=\Ex4: h19-u|heathkit with underscore cursor:\ :ve@:vs@:tc=h19-b: alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19:\ :li#60:\ :al=\EL:dl=\EM:tc=h19: # The major problem with the Z29 is that it requires more # padding than the Z19. Once again, here's a little termcap # entry for it that will do the trick. # # The problem declaring an H19 to be synonomous with a Z29 is that # it needs more padding. It especially loses if a program attempts # to put the Z29 into insert mode and insert text at 9600 baud. It # even loses worse if the program attempts to insert tabs at 9600 # baud. Adding padding to text that is inserted loses because in # order to make the Z29 not die, one must add so much padding that # whenever the program tries to use insert mode, the effective # rate is about 110 baud. # # What program would want to put the terminal into insert mode # and shove stuff at it at 9600 baud you ask? # # Emacs. Emacs seems to want to do the mathematically optimal # thing in doing a redisplay rather than the practical thing. # When it is about to output a line on top of a line that is # already on the screen, instead of just killing to the end of # the line and outputing the new line, it compares the old line # and the new line and if there are any similarities, it # constructs the new line by deleting the text on the old line # on the terminal that is already there and then inserting new # text into the line to transform it into the new line that is # to be displayed. The Z29 does not react kindly to this. # # But don't cry for too long.... There is a solution. You can make # a termcap entry for the Z29 that says the Z29 has no insert mode. # Then Emacs cannot use it. "Oh, no, but now inserting into a # line will be really slow", you say. Well there is a sort of a # solution to that too. There is an insert character option on # the Z29 that will insert one character. Unfortunately, it # involves putting the terminal into ansi mode, inserting the # character, and changing it back to H19 mode. All this takes 12 # characters. Pretty expensive to insert one character, but it # works. Either Emacs doesn't try to use its inserting hack when # it's only given an insert character ability or the Z29 doesn't # require padding with this (the former is probably more likely, # but I haven't checked it out). z29|zenith29|z29b|zenith z29b:\ :am:ms:\ :co#80:li#24:\ :ae=\EF:al=\EL:as=\EG:bl=^G:bt=\E-:cd=\EJ:ce=\EK:\ :cl=\EE:cm=\EY%+ %+ :cr=^M:dc=\EN:dl=\EM:do=\EB:ei=:\ :ho=\EH:ic=\E<\E[1@\E[?2h:im=:is=\E<\E[?2h\Ev:k0=\E~:\ :k1=\ES:k2=\ET:k3=\EU:k4=\EV:k5=\EW:k6=\EP:k7=\EQ:\ :k8=\ER:k9=\E0I:kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:\ :ku=\EA:l0=home:le=^H:nd=\EC:se=\Eq:sf=\n:so=\Ep:\ :sr=\EI:ta=^I:ue=\Es0:up=\EA:us=\Es8:ve=\Ey4:vs=\Ex4: # From: Brad Brahms <Brahms@USC-ECLC> z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor:\ :ve=\Ey4\Em70:vs=\Ex4\Em71:tc=z100bw: # (z100bw: removed obsolete ":kn#10:"; mapped ":pt:" to default tabs -- esr) z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc:\ :bs:mi:ms:pt:\ :co#80:li#24:\ :ae=\EG:al=5*\EL:as=\EF:cd=\EJ:ce=\EK:cl=5*\EE:\ :cm=1*\EY%+ %+ :dc=1*\EN:dl=5*\EM:do=\EB:ei=\EO:\ :ho=\EH:im=\E@:k0=\EJ:k1=\ES:k2=\ET:k3=\EU:k4=\EV:\ :k5=\EW:k6=\EP:k7=\EQ:k8=\ER:k9=\EOI:kb=^H:kd=\EB:\ :kh=\EH:kl=\ED:kr=\EC:ku=\EA:nd=\EC:se=\Eq:so=\Ep:\ :sr=\EI:up=\EA:ve=\Ey4:vs=\Ex4: p19:\ :al=2*\EL:dl=2*\EM:tc=h19-b: # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu> # (ztx: mapped ":pt:" to default tabs; removed duplicate :sr: -- esr) ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10/11:\ :am:bs:es:hs:pt:\ :co#80:li#24:\ :al=\EL:cd=\EJ:ce=\EK:cl=\EE:cm=\EY%+ %+ :dl=\EM:\ :do=^J:ds=\Ey1:fs=\Ek\Ey5:ho=\EH:\ :is=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>:k0=\ES:\ :k1=\EB:k2=\EU:k3=\EV:k4=\EW:k5=\EP:k6=\EQ:k7=\ER:\ :kb=^H:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:\ :se=\Eq:so=\Es5:sr=\EI:ts=\Ej\Ex5\Ex1\EY8%+ \Eo:\ :ue=\Eq:up=\EA:us=\Es2: #### IMS International (ims) # # There was a company called IMS International located in Carson City, # Nevada, that flourished from the mid-70s to mid-80s. They made S-100 # bus/Z80 hardware and a line of terminals called Ultimas. # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985 ims950-b|bare ims950 no init string:\ :is@:tc=ims950: ims950-ns|ims950 w/no standout:\ :se@:so@:ue@:us@:tc=ims950: # (ims950: removed obsolete ":ko@:" -- esr) ims950|ims televideo 950 emulation:\ :xn@:\ :k0@:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:k9@:kb@:kd@:kh@:\ :kl@:kr@:ku@:vb@:tc=tvi950: # (ims950-rv: removed obsolete ":ko@:" -- esr) ims950-rv|ims tvi950 rev video:\ :xn@:\ :k0@:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:k9@:kb@:kd@:kh@:\ :kl@:kr@:ku@:vb@:tc=tvi950-rv: # (ims-ansi: mapped ":pt:" to default tabs -- esr) ims-ansi|ultima2|ultimaII|IMS Ultima II:\ :am:bs:pt:\ :co#80:li#24:\ :cd=\E[0J:ce=\E[0K:cl=\E[;H\E[2J:cm=\E[%i%2;%2H:\ :do=\ED:if=/usr/share/tabset/vt100:\ :is=\E[0m\E[>14l\E[?1;?5;20l\E>\E[1m\r:kd=\E[B:\ :kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:se=\E[0m\E[1m:\ :so=\E[7m:sr=\EM:ue=\E[0m\E[1m:up=\EM:us=\E[4m: #### Intertec Data Systems # # I think this company is long dead as of 1995. They made an early CP/M # micro called the "Intertec Superbrain" that was moderately popular, # then sank out of sight. # superbrain|intertec superbrain:\ :am:bw:\ :co#80:li#24:\ :bl=^G:cd=\E~k<10*>:ce=\E~K:cl=\014:cm=\EY%+ %+ :\ :cr=^M:do=^J:kd=^J:kl=^U:kr=^F:ku=^K:le=^H:nd=^F:\ :sf=^J:ta=^I:te=^L:ti=^L:up=^K: intertube|intertec|Intertec InterTube:\ :am:\ :co#80:li#25:\ :bl=^G:cl=^L:cm=\EY%+ %+ :cr=^M:do=^J:ho=^A:le=^H:\ :nd=^F:se=\E0@:sf=^J:so=\E0P:up=^Z: # The intertube 2 has the "full duplex" problem like the tek 4025: if you # are typing and a command comes in, the keystrokes you type get interspersed # with the command and it messes up it2|intertube2|intertec data systems intertube 2:\ :am:\ :co#80:li#25:\ :bl=^G:ce=\EK:ch=\020%+^J:cl=^L:cm=\016%.\020%+^J:\ :cr=^M:cv=\013%.:do=^J:ho=^A:le=^H:ll=^K^X\r:nd=^F:\ :se=\E0@:sf=^J:so=\E0P:up=^Z: #### Modgraph # # These people used to be reachable at: # # Modgraph, Inc # 1393 Main Street, # Waltham, MA 02154 # Vox: (617)-890-5796. # # However, if you call that number today you'll get an insurance company. # I think Modgraph is long gone. # modgraph|mod|modgraph terminal emulating vt100:\ :xn@:\ :co#80:li#24:\ :is=\E^9;0s\E^7;1s\E[3g\E^11;9s\E^11;17s\E^11;25s\E^11;33s\E^11;41s\E^11;49s\E^11;57s\E^11;65s\E^11;73s\E^11;81s\E^11;89s:\ :rf@:sr=5\EM\E[K:vs=\E^9;0s\E^7;1s:tc=vt100: # (modgraph2: mapped ":pt:" to default tabs -- esr) # The GX-1000 manual is dated 1984 modgraph2|modgraph gx-1000, set to 80x24, keypad not enabled:\ :am:bs:da:db:pt:\ :co#80:li#24:\ :cd=50\EJ:ce=3\EK:cl=50\EH\EJ:cm=5\EY%+ %+ :\ :is=\E<\E^5;2s\E^7;1s\E[3g\E^11;9s\E^11;17s\E^11;25s\E^11;33s\E^11;41s\E^11;49s\E^11;57s\E^11;65s\E^11;73s\E^11;81s\E^11;89s\E^12;0s\E^14;2s\E^15;9s\E^25;1s\E^9;1s\E^27;1:\ :nd=2\EC:sr=5\EI:up=2\EA: #### Morrow Designs # # This was George Morrow's company. They started in the late 1970s making # S100-bus machines. They used to be reachable at: # # Morrow # 600 McCormick St. # San Leandro, CA 94577 # # but they're long gone now (1995). # # The mt70 terminal was shipped with the Morrow MD-3 microcomputer. # Jeff's specimen was dated June 1984. # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995 mt70|mt-70|Morrow MD-70; native Morrow mode:\ :am:mi:ms:xo:\ :co#80:it#8:li#24:\ :%1=^AO\r:F1=^A`\r:F2=^Aa\r:F3=^Ab\r:F4=^Ac\r:\ :F5=^Ad\r:F6=^Ae\r:F7=^Af\r:F8=^Ag\r:F9=^Ah\r:\ :FA=^Ai\r:ac=+z\\\054{.yOi-x`|jGkFlEmDnHtLuKvNwMxIqJ:\ :ae=\E%:al=\EE:as=\E$:bl=^G:bt=\EI:cd=\EY:ce=\ET:\ :cl=^Z:cm=\E=%+ %+ :cr=^M:ct=\E0:dc=\EW:dl=\ER:do=^J:\ :ei=:ho=^^:i1=\E"2\EG0\E]:ic=\EQ:im=:k1=^A@\r:\ :k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\ :k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kB=^A^Z\r:\ :kC=^An\r:kD=\177:kb=^H:kd=^AK\r:kh=^AN\r:kl=^AL\r:\ :kr=^AM\r:ku=^AJ\r:le=^H:me=\EG0:mh=\EG2:mr=\EG4:\ :nd=^L:nw=^_:se=\EG0:sf=^J:so=\EG4:ta=^I:\ :ti=\E"2\EG0\E]:up=^K:us=\EG1:vb=\EK1\EK0:ve=\E"2:\ :vi=\E"0: #### Netronics # # The Netronics Smarterm 80 was a kit-built terminal that came in at least two # flavors, a first 40-column version, and a second 64-column version released # about 1983. # (netx: removed obsolete ":ma=j^Jk^Pl :" -- esr) netx|netronics:\ :bs:\ :co#64:li#16:\ :bl=^G:cd=\006\005:ce=\005:cl=\014:cm=\E=%+@%+@:\ :cr=^M:do=^J:ho=^D:le=^H:nd=\E+@A:sf=^J:sr=\E=@@\013:\ :up=^K: smartvid|Netronics Smartvid 80:\ :am:bw:eo:ms:xs:\ :co#80:li#24:sg#1:ug#1:\ :ae=\EGB:as=\EG@:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=^L:\ :cm=\E=%+ %+ :cr=^M:dc=\EW:dl=\ER:do=^J:ei=\ED:ho=^Z:\ :ic=\EQ:im=\EC:le=^H:ll=^Z^K:nd=^A:se=\EG@:sf=^J:\ :so=\EGC:sr=^K:ta=\Ei:te=^Z^K:ue=\EG@:up=^K:us=\EGA:\ :ve=^Z^K: smarterm|smarterm-s|netronics smarterm 80x24 naked terminal:\ :am:ul:\ :co#80:li#24:sg#1:ug#1:\ :al=\EE:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=^L:\ :cm=\E=%+ %+ :cr=^M:dc=\EW:dl=\ER:do=^J:ei=\ED:ho=^Z:\ :ic=\EQ:im=\EC:le=^H:nd=^A:sf=^J:ta=^I:ue=\EG@:\ :us=\EGA: #### Omron # # This company is still around in 1995, manufacturing point-of-sale systems. omron|Omron 8025AG:\ :am:bs:da:db:\ :co#80:li#24:\ :al=\EL:bl=^G:cd=\ER:ce=\EK:cl=\EJ:cr=^M:dc=\EP:\ :dl=\EM:do=^J:ho=\EH:le=^H:nd=\EC:se=\E4:sf=\ES:\ :so=\Ef:sr=\ET:up=\EA:vs=\EN: #### Soroc # # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr) soroc120|iq120|soroc iq120:\ :cd=\EY:ce=\ET:cl=\E*:do=^J:kd=^J:kl=^H:kr=^L:ku=^K:tc=adm3a: soroc140|iq140|soroc iq140:\ :am:mi:\ :co#80:li#24:\ :al=\Ee:bl=^G:bt=\EI:cd=\Ey:ce=\Et:cl=\E+:\ :cm=\E=%+ %+ :cr=^M:dc=\Ew:dl=\Er:do=^J:ei=\E8:ho=^^:\ :im=\E9:k0=^A0\r:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:\ :k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:kb=^H:\ :kh=^^:kr=^L:ku=^K:le=^H:ll=^^^K:nd=^L:se=\E\177:\ :sf=^J:so=\E\177:ue=\E^A:up=^K:us=\E^A: #### Southwest Technical Products # # These guys made an early personal micro called the M6800. # The ct82 was probably its console terminal. # # (swtp: removed obsolete ":bc=^D:" -- esr) swtp|ct82|southwest technical products ct82:\ :am:\ :co#82:li#20:\ :al=^^Y:bl=^G:cd=^V:ce=^F:cl=^L:cm=\013%r%.%.:cr=^M:\ :dc=^^H:dl=^Z:do=^J:ei=:ho=^P:ic=^^X:im=:\ :is=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011:\ :le=^D:ll=^C:nd=^S:se=^^^F:sf=^N:so=^^^V:sr=^O:up=^A: #### Synertek # # Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995): # # Synertek used to make ICs, various 6502-based single-board process # control and hobbyist computers, and assorted peripherals including a # series of small inexpensive terminals (I think they were one of the # first to have a "terminal-on-a-keyboard", where the terminal itself # was only slightly larger than the keyboard). # # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40 # was a 40x24 terminal that could connect to a standard TV through a # video modulator. The KTM-2/80 was the 80-column version (the 2/40 # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM). # I have a KTM-2/80 still in working order. The KTM-2s had fully # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program # ROM and 2 ROMs as character generators. They were incredibly simple, # and I've never had any problems with mine (witness the fact that mine # was made in 1981 and is still working great... I've blown the video # output transistor a couple of times, but it's a 2N2222 :-) # # The KTM-3 (which is what is listed in the terminfo file) was their # attempt at putting a KTM-2 in a box (and some models came with a # CRT). It wasn't much different from the KTM-2 hardware-wise, but the # control and escape sequences are very different. The KTM-3 was always # real broken, at least according to the folks I've talked to about it. # # The padding in the entry is probably off--these terminals were very # slow (it takes like 100ms for the KTM-2 to clear the screen...) And # anyone with any sanity replaced the ROMs with something that provided # a reasonable subset of VT100 functionality, since the usual ROMs were # obviously very primitive... oh, you could get an upgraded ROM from # Synertek for some incredible amount of money, but what hacker with an # EPROM burner would do that? :) # # Sorry I don't have any contact info; I believe they were located in # Sunnyvale, and I'm fairly sure they are still manufacturing ICs # (they've gone to ASICs and FPGAs), but I doubt they're in the computer # business these days. # Tested, seems to work fine with vi. synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal:\ :am:\ :co#80:li#24:\ :cd=\EJ:ce=\EK:cl=^Z:cm=\E=%+ %+ :le=^H:nd=^L:up=^K: #### Tab Office Products # # TAB Products Co. - Palo Alto, California # Electronic Office Products, # 1451 California Avenue 94304 # # I think they're out of business. # # The tab 132 uses xon/xoff, so no padding needed. # :ks:/:ke: have nothing to do with arrow keys. # :is: sets 80 col mode, normal video, autowrap on (for :am:). # Seems to be no way to get rid of status line. # The manual for this puppy was dated June 1981. It claims to be VT52- # compatible. tab132|tab|tab132-15|tab 132/15:\ :da:db:\ :co#80:dN@:li#24:lm#96:\ :al=\E[L:cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:do=^J:\ :ei=\E[4l:im=\E[4h:is=\E[?7h\E[?3l\E[?5l:kd=\E[B:ke@:\ :kl=\E[D:ks@:ku=\E[A:tc=vt100: tab132-w:\ :co#132:\ :is=\E[?7h\E[?3h\E[?5l:tc=tab132: tab132-rv:\ :is=\E[?7h\E[?3l\E[?5h:tc=tab132: tab132-w-rv:\ :is=\E[?7h\E[?3h\E[?5h:tc=tab132-w: #### Teleray # # Research Incorporated # 6425 Flying Cloud Drive # Eden Prairie, MN 55344 # Vox: (612)-941-3300 # # The Teleray terminals were all discontinued in 1992-93. RI still services # and repairs these beasts, but no longer manufactures them. The Teleray # people believe that all the types listed below are very rare now (1995). # There was a newer line of Telerays (Model 7, Model 20, Model 30, and # Model 100) that were ANSI-compatible. # # Note two things called "teleray". Reorder should move the common one # to the front if you have either. A dumb teleray with the cursor stuck # on the bottom and no obvious model number is probably a 3700. # t3700|dumb teleray 3700:\ :bs:\ :co#80:li#24:\ :bl=^G:cl=^L:cr=^M:do=^J:le=^H:sf=^J: # (t3800: mapped ":pt:" to default tabs -- esr) t3800|teleray 3800 series:\ :bs:pt:\ :co#80:li#24:\ :bl=^G:cd=\EJ:ce=\EK:cl=^L:cm=\EY%+ %+ :cr=^M:do=^J:\ :ho=\EH:le=^H:ll=\EY7 :nd=\EC:sf=^J:ta=^I:up=^K: # (t1061: mapped ":pt:" to default tabs -- esr) t1061|teleray|teleray 1061:\ :am:km:xs:xt:\ :co#80:li#24:sg#1:ug#1:\ :al=\EL:bl=^G:cd=\EJ:ce=\EK:cl=\014:cm=\EY%+ %+ :\ :cr=^M:ct=\EG:dc=\EQ:dl=\EM:do=^J:ei=:ho=\EH:ic=\EP:\ :im=:ip=:\ :is=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef:\ :k1=^Z1:k2=^Z2:k3=^Z3:k4=^Z4:k5=^Z5:k6=^Z6:k7=^Z7:\ :k8=^Z8:le=^H:nd=\EC:se=\ER@:sf=^J:so= \ERD:st=\EF:\ :ta=^I:ue=\ER@:up=\EA:us=\ERH: t1061f|teleray 1061 with fast PROMs:\ :al=\EL:dl=\EM:ip@:tc=t1061: # "Teleray Arpa Special", offically designated as # "Teleray Arpa network model 10" with "Special feature 720". # This is the new (1981) fast microcode updating the older "arpa" proms # (which gave meta-key and progmmable-fxn keys). 720 is much much faster, # converts the keypad to programmable function keys, and has other goodies. # Standout mode is still broken (magic cookie, etc) so is suppressed as no # programs handle such lossage properly. # Note: this is NOT the old termcap's "t1061f with fast proms." # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah # (t10: mapped ":pt:" to default tabs; # removed overridden ":so@:se@:us@:ue@:" -- esr) t10|teleray 10 special:\ :bs:km:pt:xs:xt:\ :co#80:li#24:sg#2:ug#1:\ :al=\EL:cd=\EJ:ce=\EK:cl=30\Ej:cm=\EY%+ %+ :dc=\EQ:\ :dl=\EM:ei=:ho=\EH:ic=\EP:im=:nd=\EC:pc=\200:se=\ER@:\ :sf=\Eq:so=\ERD:sr=\Ep:ue=\ER@:up=\EA:us=\ERH: # teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and # back/forth words. Put the function keys (f1-f10) where they can be # found, and turn off the other magic keys along the top row, except # for line/local. Do the magic appropriate to make the page shifts work. # Also toggle ^S/^Q for those of us who use Emacs. t16|teleray 16:\ :am:da:db:mi:xs:xt:\ :co#80:li#24:\ :al=\E[L:bl=^G:cd=\E[0J:ce=\E[0K:cl=\E[H\E[2J:\ :cm=%i\E[%d;%df:cr=^M:dc=\E[P:dl=\E[M:do=\E[B:\ :ei=\E[4l:ho=\E[H:im=\E[4h:k1=^Z1:k2=^Z2:k3=^Z3:\ :k4=^Z4:k5=^Z5:k6=^Z6:k7=^Z7:k8=^Z8:k9=^Z9:k;=^Z0:\ :le=^H:nd=\E[C:se=\E[m:sf=^J:so=\E[7m:sr=\E[T:ta=^I:\ :te=\E[V\E[24;1f\E[?38h:ti=\E[U\E[?38l:ue=\E[m:\ :up=\E[A:us=\E[4m: #### Texas Instruments (ti) # ti700|ti733|ti735|ti silent 700:\ :bs:hc:os:\ :co#80:dC#162:\ :bl=^G:cr=\r:do=^J:le=^H:sf=^J: ti743|ti745|ti silent 745:\ :bs:hc:os:\ :co#80:\ :bl=^G:cr=^M:do=^J:le=^H:sf=^J: ti800|ti omni 800:\ :bs:hc:os:\ :co#132:\ :bl=^G:cr=^M:do=^J:le=^H:sf=^J: ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL:\ :am:xo:\ :co#80:it#8:li#24:\ :al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[2J\E[H:\ :cm=%i\E[%d;%dH:cr=^M:cs=%i\E[%d;%dr:ct=\E[3g:\ :dl=\E[M:do=\E[B:ho=\E[H:k1=\EOP:k2=\EOQ:k3=\EOR:\ :k4=\EOS:k5=\E[16~:k6=\E[17~:k7=\E[18~:k8=\E[19~:\ :k9=\E[20~:kD=\E[P:kI=\E[@:kb=^H:kd=\E[B:kl=\E[D:\ :kr=\E[C:ku=\E[A:le=\E[D:mb=\E[5m:md=\E[1m:me=\E[0m:\ :mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[m:sf=\ED:\ :so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[m:up=\E[A:\ :us=\E[4m:ve=\E[?25h:vi=\E[?25l:vs=\E[?31h: ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL:\ :am:xo:\ :co#80:it#8:li#24:\ :al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[2J\E[H:\ :cm=%i\E[%d;%dH:cr=^M:cs=%i\E[%d;%dr:ct=\E[3g:\ :dl=\E[M:do=\E[B:ho=\E[H:k1=P\217>:k2=Q\217>:\ :k3=R\217>:k4=S\217>:k5=~\23316>:k6=~\23317>:\ :k7=~\23318>:k8=~\23319>:k9=~\23320>:kD=P\233>:\ :kI=@\233>:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:\ :le=\E[D:mb=\E[5m:md=\E[1m:me=\E[0m:mr=\E[7m:nd=\E[C:\ :rc=\E8:sc=\E7:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:st=\EH:\ :ta=^I:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[?25h:\ :vi=\E[?25l:vs=\E[?31h: ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode:\ :co#132:\ :tc=ti924: ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode:\ :co#132:\ :tc=ti924-8: em931-9|Texas Instruments 924 Emulator in the 931 Mode:\ :tc=ti931: em924|Texas Instruments 924 Emulator in the 924 Mode:\ :tc=ti924: em931|Texas Instruments 931 Emulator:\ :tc=ti931: ti931|Texas Instruments 931 VDT:\ :am:xo:\ :co#80:li#24:\ :LE=ENTR:al=\EN:bl=^G:cd=\EJ:ce=\EI:cl=\EL:\ :cm=\EY%+ %+ :cr=^M:dc=\EQ:dl=\EO:do=\EB:ei=:ho=\EH:\ :ic=\ER\EP\EM:im=:is=\EGB\E(@B@@\E):k1=\Ei1:k2=\Ei2:\ :k3=\Ei3:k4=\Ei4:k5=\Ei5:k6=\Ei6:k7=\Ei7:k8=\Ei8:\ :k9=\Ei9:kA=\EN:kD=\EQ:kI=\EP:kL=\EO:kd=\EB:kl=\ED:\ :kr=\EC:ku=\EA:le=\ED:mb=\E4P:me=\E4@:mk=\E4H:\ :mr=\E4B:nd=\EC:se=\E4@:sf=\Ea:so=\E4A:sr=\Eb:\ :ue=\E4@:up=\EA:us=\E4D:ve=\E4@: ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL:\ :cs@:sf=\E[1S:sr=\E[1T:tc=ti924: ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL:\ :cs@:sf=S\2331>:sr=T\2331>:tc=ti924-8: ti_ansi|basic entry for ti928:\ :am:eo:ut:xn:xo:\ :Co#8:co#80:it#8:li#25:pa#64:\ :@7=\E[F:Sb=\E[4%dm:Sf=\E[3%dm:al=\E[L:bl=^G:bt=\E[Z:\ :cd=\E[J:ce=\E[K:cl=\E[2J\E[H:cm=\E[%i%d;%dH:cr=^M:\ :cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=\E[B:ei=:ho=\E[H:\ :ic=\E[@:im=:k0=\E[V:k1=\E[M:k2=\E[N:k3=\E[O:k4=\E[P:\ :k5=\E[Q:k6=\E[R:k7=\E[S:k8=\E[T:k9=\E[U:kN=\E[G:\ :kP=\E[I:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:\ :ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:nd=\E[C:\ :op=\E[37;40m:se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:\ :ue=\E[m:up=\E[A:us=\E[4m: # # 928 VDT 7 bit control mode # ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL::\ :%9=\E[35~:@7=\E_1\E\\:@8=\E[8~:F1=\E[29~:F2=\E[31~:\ :F3=\E[32~:F5=\E[34~:k1=\E[17~:k2=\E[18~:k3=\E[19~:\ :k4=\E[20~:k5=\E[21~:k6=\E[23~:k7=\E[24~:k8=\E[25~:\ :k9=\E[26~:k;=\E[28~:kD=\E[P:kI=\E[@:kN=\E[S:kP=\E[T:tc=ti_ansi: # # 928 VDT 8 bit control mode # ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL::\ :%9=\23335~:@7=\2371\234:@8=\2338~:F1=\23329~:\ :F2=\23331~:F3=\23332~:F5=\23334~:k1=\23317~:\ :k2=\23318~:k3=\23319~:k4=\23320~:k5=\23321~:\ :k6=\23323~:k7=\23324~:k8=\23325~:k9=\23326~:\ :k;=\23328~:kD=\233P:kI=\233@:kN=\233S:kP=\233T:\ :kh=\233H:tc=ti_ansi: #### Zentec (zen) # # (zen30: removed obsolete ":ma=^L ^R^L^K^P:" -- esr) zen30|z30|zentec 30:\ :am:bs:mi:ul:\ :co#80:li#24:\ :al=\EE:bl=^G:cd=\EY:ce=\ET:cl=\E*:cm=\E=%+ %+ :\ :cr=^M:dc=\EW:dl=\ER:do=^J:ei=\Er:ho=^^:im=\Eq:le=^H:\ :nd=^L:se=\EG0:sf=^J:so=\EG6:up=^K: # (zen50: this had unknown capabilities # :BS=^U:CL=^V:CR=^B: # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh, # which were also in the original entry -- esr) # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr) zen50|z50|zentec zephyr:\ :am:bs:\ :co#80:li#24:sg#1:\ :al=\EE:cd=\EY:ce=\ET:cl=\E+:cm=\E=%+ %+ :dc=\EW:\ :dl=\ER:ei=:ic=\EQ:im=:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:\ :se=\EGO:so=\EG4:up=^K: ######## OTHER OBSOLETE TYPES # # These terminals are *long* dead -- these entries are retained for # historical interest only. #### Obsolete non-ANSI software emulations # # CTRM terminal emulator # 1. underlining is not allowed with colors: first, is is simulated by # black on white, second, it disables background color manipulations. # 2. BLINKING, REVERSE and BOLD are allowed with colors, # so we have to save their status in the static registers A, B and H # respectively, to be able to restore them when color changes # (because any color change turns off ALL attributes) # 3. "enter_bold_mode" and "enter_reverse_mode" sequences alternates modes, # rather then simply entering them. Thus we have to check the # static register B and H to determine the status, before sending the # escape sequence. # 4. sgr0 now must set the status of all 3 register (A,B,H) to zero # and then reset colors # 5. implementation of the protect mode would badly penalize the performance. # we would have to use \E&bn sequence to turn off colors (as well as all # other attributes), and keep the status of protect mode in yet another # static variable. If someone really need this mode, they would have to # create another terminfo entry. # 6. original color-pair is white on black. # store the information about colors into static registers # 7. set foreground color. it performs the following steps. # 1) turn off all attributes # 2) turn on the background and video attribues that have been turned # on before (this information is stored in static registers X,Y,Z,A,B,H,D). # 3) turn on foreground attributes # 4) store information about foreground into U,V,W static registers # 8. turn on background: similar to turn on foreground above ctrm|C terminal emulator:\ :am:ut:xo:\ :Co#8:NC#2:Nl#0:co#80:lh#0:li#24:lm#0:lw#0:pa#63:\ :pb#19200:vt#6:\ :..Sb=\E&bn\n%?%gA%t\E&dA%;\n%?%gB%t\E&dB%;\n%?%gH%t\E&dH%;\n%?%gU%t\E&bR%;\n%?%gV%t\E&bG%;\n%?%gW%t\E&bB%;\n\n%?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ\n%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY\n%?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX:\ :..Sf=\E&bn\n%?%gA%t\E&dA%;\n%?%gB%t\E&dB%;\n%?%gH%t\E&dH%;\n%?%gX%t\E&br%;\n%?%gY%t\E&bg%;\n%?%gZ%t\E&bb%;\n\n%?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW\n%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV\n%?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU:\ :al=\EL:bl=^G:bt=\Ei:cd=\EJ:ce=\EK:ch=\E&a%dC:\ :cl=\EH\EJ:cm=\E&a%r%dc%dY:cr=^M:ct=\E3:cv=\E&a%dY:\ :dc=\EP:dl=\EM:do=^J:ei=\ER:im=\EQ:ip=:is=\E&jA\r:\ :k1=\Ep\r:k2=\Eq\r:k3=\Er\r:k4=\Es\r:k5=\Et\r:\ :k6=\Eu\r:k7=\Ev\r:k8=\Ew\r:kb=^H:kd=\Ew\r:ke=\E&jA:\ :kh=\Ep\r:kl=\Eu\r:kr=\Ev\r:ks=\E&jB:ku=\Et\r:le=^H:\ :mb=\E&dA%{1}%PA:md=%?%gH%{0}%=%t\E&dH%{1}%PH%;:\ :me=\E&d@%{0}%PA%{0}%PB%{0}%PH:\ :mr=%?%gB%{0}%=%t\E&dB%{1}%PB%;:nd=\EC:\ :op=\E&bn\E&bB\E&bG\E&bR\n%{0}%PX%{0}%PY%{0}%PZ\n%{1}%PW%{1}%PV%{1}%PU:\ :..sa=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH\n%?%p1%p3%p5%|%|%t\E&dB%{1}%PB%;\n%?%p4%t\E&dA%{1}%PA%;\n%?%p6%t\E&dH%{1}%PH%;\n%?%p2%t\E&dD%;:\ :sf=^J:so=\E&dD:st=\E1:ta=\011:up=\EA:us=\E&dD: # gs6300 - can't use blue foreground, it clashes with underline; # it's simulated with cyan gs6300|emots|AT&T PC6300 with EMOTS Terminal Emulator:\ :am:ms:ut:xo:\ :Co#8:co#80:it#8:li#24:pa#63:\ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\ :LE=\E[%dD:LF=\E|:RI=\E[%dC:Sb=\E[?;%dm:\ :..Sf=\E[?%?%p1%{0}%=%t0\n%e%p1%{1}%=%t2\n%e%p1%{1}%-%d%;m:\ :UP=\E[%dA:\ :ac=\\\054\\\054..--++``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ :ae=\E[10m:al=\E[L:as=\E[11m:bl=^G:cd=\E[J:ce=\E[K:\ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:\ :do=^J:ei=:ho=\E[H:ic=\E[@:im=:is=\E[0m:k1=\E[0s:\ :k2=\E[24s:k3=\E[1s:k4=\E[23s:k5=\E[2s:k6=\E[22s:\ :k7=\E[3s:k8=\E[21s:kB=^R^I:kb=^H:kd=\E[B:kh=\E[H:\ :kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:\ :me=\E[m\E[10m:mr=\E[7m:nd=\E[C:op=\E[?;m:pf=\E[4i:\ :po=\E[5i:r1=\Ec:sf=^J:so=\E[1m:sr=\E[L:ta=^I:\ :up=\E[A:us=\E[4m: # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT # MS-Kermit with Heath-19 emulation mode enabled # (h19k: changed ":pt@:" to ":it@" h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin):\ :am@:da:db:xt:\ :it@:\ :ta@:tc=h19-u: # pc52 - can't use blue foreground, it clashes with underline; # it's simulated with cyan # bold means: white on black bold, so it not allowed with colors # rev means: black on white, also not allowed # smso and dim are simulated with colors, ditto # smul is allowed, even though it always means white foreground: # it is too important to leave out. pc52|dec vt52 for PC:\ :am:ms:ut:\ :Co#8:NC#53:co#80:it#8:li#25:pa#63:\ :Sb=\Ec%d:..Sf=\Eb%?%p1%{1}%=%t3\n%e%p1%d%;:al=\EL:\ :bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :cr=^M:\ :dl=\EM:do=^J:k1=\Ea:k2=\Eb:k3=\Ec:k4=\Ed:k5=\Ee:\ :k6=\Ef:k7=\Eg:k8=\Eh:k9=\Ei:k;=\Ej:kb=^H:kd=\ED:\ :kl=\EL:kr=\ER:ku=\EU:le=^H:mb=\Eo:md=\Ebo\Ec0:\ :me=\Eb7\Ec0\Et:mh=\Eb3\Ec0:mr=\Ep:nd=\EC:\ :op=\Eb7\Ec0:se=\Eb7\Ec0:sf=^J:so=\Eb6\Ec4:sr=\EI:\ :ta=^I:up=\EA:us=\Es: # vs100 emulator using tsim # From: <lai@decwrl.dec.com> # (vs100t: had Al/Dl in front of obvious AL/DL capabilities; # also mapped ":pt:" to default tabs -- esr) vs100t|tsim|vs100-tsim:\ :am:bs:pt:\ :co#80:li#24:\ :AL=\E+%+ :DL=\E-%+ :al=\EI:cd=\EQ:ce=\EL:cl=\EE:\ :cm=\EM%+ %+ :cs=\ES%+ %+ :dc=\Ed:dl=\ED:do=^J:ei=:\ :ho=\EH:ic=\Ei:im=:is=\ER:nd=\En:rs=\ER:se=\Er:\ :so=\Eh:ue=\Ev:up=^K:us=\Eu: # From: Rick Thomas <ihnp4!btlunix!rbt> xtalk|IBM PC with xtalk communication program (versions up to 3.4):\ :am:mi:ms:xo:\ :co#80:it#8:li#24:sg#1:vt#3:\ :@8=\EOM:DO=\E[%dB:K1=\EOq:K2=\EOr:K3=\EOs:K4=\EOp:\ :K5=\EOn:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ :ae=^O:al=\E[L:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:dl=\E[M:\ :do=^J:eA=\E(B\E)0:ho=\E[H:k0=\EOy:k1=\EOP:k2=\EOQ:\ :k3=\EOR:k4=\EOS:k5=\EOt:k6=\EOu:k7=\EOv:k8=\EOl:\ :k9=\EOw:k;=\EOx:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\ :kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:nd=\E[C:\ :r2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:se=\E[m :sf=^J:\ :so=\E[7m :sr=\EM:st=\EH:ta=^I:up=\E[A: # YTERM standard version 1.0. # Straight old ascii keyboard except function keys are Yale (e.g.,ASCII.KBD). # Only 80 tab columns (else yterm 1.1 bug). No :xn: in 1.0. # Cannot use termcap :sr=\EM: because vi will not work, too bad. # vi string is given so that yterm is reset each vi startup. # (yterm10: removed obsolete ":EP:" and ":ma=h^Jj k l H:" capabilities; # mapped ":pt:" to default tabs -- esr) # From: greg small <gts@populi.berkeley.edu> 9-25-84 yterm10|yterm 1.0 UCB ascii.kbd:\ :am:bs:pt:\ :co#80:li#24:\ :cd=^K:ce=^]:cl=^L:cm=\036%r%+ %+ :ho=^Y:\ :is=\017\E[7i\E[m\E[?7h\E[?3g\r\EHY0 for \EHYTERM 1.\EH0 with A\EHSCII.KBD\EH 9-13-84\EH \EH \EH \EH \EH\n:\ :k0=\E0:k1=\E1:k2=\E2:k3=\E3:k4=\E4:k5=\E5:k6=\E6:\ :k7=\E7:k8=\E8:k9=\E9:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:\ :nd=^\:rc=\E8:sc=\E7:se=\E[m:so=\E[7m:ue=\E[m:up=^_:\ :us=\E[4m:\ :vs=\017\E[7i\E[m\E[?7h\E[?3g\r\EHY0 \EH \EH \EH \EH \EH \EH \EH \EH \EH\r: # YTERM variant version 1.1. Version 1.1 has :xn:. # From: greg small <gts@populi.berkeley.edu> 9-13-84 yterm11|yterm 1.1 UCB ascii.kbd:\ :xn:\ :is=\017\E[7i\E[m\E[?7h\E[?3g\r\EHY1 for \EHYTERM 1.\EH1 with A\EHSCII.KBD\EH 9-13-84\EH \EH \EH \EH \EH\n:tc=yterm10: # YTERM 1.0 variant no autowrap or tabs # X does not remember autowrap or tabs when T is deleted and restarted. # (yterm: changed ":pt@:" to ":it@:" -- esr) yterm10nat|yterm 1.0 UCB ascii.kbd no autowrap or tabs:\ :am@:\ :it@:\ :is=\017\E[7i\E[m\E[?7l\E[?3g\rY2 for YTERM 1.0 with ASCII.KBD 9-20-84 no autowrap or tabs\n:\ :vs=\017\E[7i\E[m\E[?7l\E[?3g\rY2\r:tc=yterm10: # The official PC terminal emulator program of the AT&T Product Centers. # Note - insert mode commented out - doesn't seem to work on AT&T PC. simterm|attpc running simterm:\ :am:\ :co#80:li#24:\ :al=\EL:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\E=%+ %+ :\ :cr=^M:dc=\ER:dl=\EM:do=\EB:ho=\EH:im=\EQ:le=^H:\ :nd=\EC:sf=^J:so=\E&dB:te=\EVE:ti=\EVS:up=\EA: #### Daisy wheel printers # # This section collects Diablo, DTC, Xerox, Qume, and other daisy # wheel terminals. These are now largely obsolete. # # This is an "experimental" entry for the SRI Agiles. # It has been tried in a minimal way -- the Agile did not blow up! # However, it has not been exhaustively tested. # Anyone who tries it and finds it wanting should get in touch with: # From: Ralph Keirstead <ralph@sri-unix> # EK352; SRI International; 333 Ravenswood Avenue; Menlo Park, CA 94025 # (agile: I removed an incorrect ":pl:" -- esr) agile|agiles|sri agiles:\ :hc:os:\ :co#132:\ :bl=^G:cr=^M:ct=\E2:do=^J:hd=\E9:hu=\E0:is=\EE\EF\EJ:\ :kb=^H:le=^H:sf=^J:st=\E1:ta=^I:up=\E^J: # (1620: mapped ":pt:" to default tabs -- esr) diablo1620|diablo1720|diablo450|ipsi|diablo 1620:\ :bs:hc:os:pt:\ :co#132:\ :ch=\E\011%i%.:ct=\E2:do=^J:hd=\ED:hu=\EU:\ :if=/usr/share/tabset/xerox1720:kb=^H:le=^H:st=\E1:\ :up=\E^J: diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin:\ :co#124:\ :do=^J:is=\r \E9:tc=diablo1620: diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640:\ :bl=^G:if=/usr/share/tabset/xerox1730:se=\E&:so=\EW:\ :ue=\ER:us=\EE:tc=diablo1620: diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin:\ :co#124:\ :if=/usr/share/tabset/xerox1730-lm:se=\E&:so=\EW:\ :ue=\ER:us=\EE:tc=diablo1620: diablo1740-lm|630-lm|1730-lm|x1700-lm:\ :tc=diablo1640-lm: # DTC 382 with VDU. Has no :cd: so we fake it with :ce:. Standout # (so="^P \002^PF:") works but won't go away without dynamite (":se=^P \200:"). # The terminal has tabs, but I'm getting tired of fighting the braindamage. # If no tab is set or the terminal's in a bad mood, it glitches the screen # around all of memory. Note that return puts a blank ("a return character") # in the space the cursor was at, so we use ^P return (and thus ^P newline for # newline). Note also that if you turn off pt and let Unix expand tabs, # curses won't work (current version) because it doesn't turn off this bit, # and cursor addressing sends a tab for row/column 9. What a losing terminal! # I have been unable to get tabs set in all 96 lines - it always leaves at # least one line with no tabs in it, and once you tab through that line, # it completely weirds out. dtc382|DTC 382:\ :am:da:db:xs:\ :co#80:li#24:lm#96:\ :al=^P^Z:bl=^G:cd=\020\025\020\023\020\023:ce=^P^U:\ :cl=\020\035:cm=\020\021%r%.%.:cr=^P^M:dc=^X:dl=^P^S:\ :ei=^Pi:ho=^P^R:im=^PI:le=^H:nd=^PR:pc=\177:sf=^J:\ :te=\020\035:ue=^P \200:up=^P^L:us=^P ^P:ve=^Pb:\ :vs=^PB: dtc300s|DTC 300s:\ :hc:os:\ :co#132:\ :bl=^G:cr=^M:ct=\E3:do=^J:ff=^L:hd=\Eh:hu=\EH:kb=^H:\ :le=^H:sf=^J:st=\E1:ta=^I:up=^Z: gsi:\ :hc:os:\ :co#132:\ :bl=^G:cr=^M:do=^J:hd=\Eh:hu=\EH:le=^H:sf=^J:ta=^I:\ :up=^Z: aj830|aj832|aj|anderson jacobson:\ :bs:hc:os:\ :bl=^G:cr=^M:do=^J:hd=\E9:hu=\E8:le=^H:sf=^J:up=\E7: # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST aj510|AJ510|Anderson-Jacobson model 510:\ :am:bs:mi:\ :co#80:li#24:\ :al=2*\E&I:cd=\E'P:ce=\E'L:cl=^L:cm=\E#%+ %+ :\ :dc=.1*\E'D:dl=2*\E&D:ei=\E'J:ic=:im=\E'I:ip=.1*:\ :kd=\EZ:kl=\EW:kr=\EX:ku=\EY:nd=\EX:pc=\177:se=\E"I:\ :so=\E"I:te=\E"N:ti=\E"N:ue=\E"U:up=\EY:us=\E"U: # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981 # This is incomplete, but it's a start. # (5520: mapped ":pt:" to default tabs -- esr) nec5520|nec|spinwriter|nec 5520:\ :bs:hc:os:pt:\ :co#132:\ :bl=^G:cr=^M:ct=\E3:do=^J:ff=^L:hd=\E]s\n\E]W:\ :hu=\E]s\E9\E]W:kb=^H:le=^H:sf=^J:st=\E1:ta=^I:\ :up=\E9: # (qume5: mapped ":pt:" to default tabs -- esr) qume5|qume|Qume Sprint 5:\ :bs:hc:os:pt:\ :co#80:\ :bl=^G:cr=^M:ct=\E3:do=^J:ff=^L:hd=\Eh:hu=\EH:kb=^H:\ :le=^H:sf=^J:st=\E1:ta=^I:up=^Z: # I suspect the xerox1720 is the same as the diablo 1620. # (x1720: mapped ":pt:" to default tabs -- esr) xerox1720|x1720|x1750|xerox 1720:\ :bs:hc:os:pt:\ :co#132:\ :bl=^G:cr=^M:ct=\E2:do=^J:ff=^L:le=^H:sf=^J:st=\E1:\ :ta=^I: #### Miscellaneous obsolete terminals, manufacturers unknown # # If you have any information about these (like, a manufacturer's name, # and a date on the serial-number plate) please send it! cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars:\ :am:bs:\ :co#73:li#36:\ :cl=^Z:ho=^^:nd=^L:up=^K: cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars:\ :am:bs:\ :co#85:li#39:\ :cl=^Z:ho=^^:k1=\E5:k2=\E6:k3=\E7:k4=\E8:kd=\E2:\ :kl=\E3:kr=\E4:ku=\E1:nd=^L:se=\Em^C:so=\Em^L:up=^K: cdi|cdi1203:\ :am:bs:hc:os:\ :co#80:\ :bl=^G:cr=\r:do=^J:le=^H:sf=^J: cops10|cops|cops-10:\ :am:bw:\ :co#80:li#24:\ :bl=^G:cd=^W:ce=^V:cl=30^X:cm=\020%+ %+ :cr=^M:do=^J:\ :kb=^H:kd=^J:kh=^Y:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:\ :sf=^J:up=^K: # (d132: removed duplicate ":ic=\E5:" -- esr) d132|datagraphix|datagraphix 132a:\ :da:db:in:\ :co#80:li#30:\ :al=\E3:bl=^G:cl=^L:cr=^M:dc=\E6:do=^J:ei=:ho=\Et:\ :ic=\E5:im=:nd=\El:sf=\Ev:sr=\Ew:up=\Ek:ve=\Em\En:\ :vs=\Ex: # I'm told the d800 was an early portable terminal that looked a lot like the # original Compaq portable. # (d800: mapped ":pt:" to default tabs -- esr) d800|Direct 800/A:\ :am:bs:da:db:ms:pt:xs:\ :co#80:li#24:\ :ae=\E[0m:as=\E[1m:bl=^G:cd=\E[J:ce=\E[K:\ :cl=\E[1;1H\E[2J:cm=\E[%i%d;%dH:cr=^M:do=^J:k1=\EOP:\ :k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:\ :k8=\EOW:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\ :nd=\E[C:se=\E[0m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:\ :ue=\E[0m:up=\E[A:us=\E[4m:ve=\E[>12h:vs=\E[>12l: digilog|digilog 333:\ :bs:\ :co#80:li#16:\ :bl=^G:ce=^X:cr=^M:do=^J:ho=^N:le=^H:nd=^I:sf=^J:\ :up=^O: env230|envision230|envision 230 graphics terminal:\ :am:mi:ms:xo:\ :co#80:it#8:li#24:vt#3:\ :@8=\EOM:DO=\E[%dB:K1=\EOq:K2=\EOr:K3=\EOs:K4=\EOp:\ :K5=\EOn:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ :ae=^O:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\ :ct=\E[3g:do=^J:eA=\E(B\E)0:ho=\E[H:k0=\EOy:k1=\EOP:\ :k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOt:k6=\EOu:k7=\EOv:\ :k8=\EOl:k9=\EOw:k;=\EOx:kb=^H:kd=\EOB:ke=\E[?1l\E>:\ :kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:\ :md=\E[1m:me=\E[m\017:mr=\E[7m:nd=\E[C:pf=\E[4i:\ :po=\E[5i:ps=\E[0i:\ :r2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:\ :..sa=\E[%?%p1%t;1%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m:\ :sc=\E7:se=\E[0m<2>:sf=^J:so=\E[1m<2>:sr=\EM:st=\EH:\ :ta=^I:ue=\E[m:up=\E[A:us=\E[4m: # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic # coupler attached, the whole rig fitting in a suitcase and more or less # portable. Hot stuff for c.1977 :-) -- esr ep48|ep4080|execuport 4080:\ :am:bs:os:\ :co#80:\ :bl=^G:cr=^M:do=^J:hd=^\:hu=^^:le=^H:sf=^J: ep40|ep4000|execuport 4000:\ :am:bs:os:\ :co#136:\ :bl=^G:cr=^M:do=^J:hd=^\:hu=^^:le=^H:sf=^J: # From: Paul Leondis <unllab@amber.berkeley.edu> ifmr|Informer D304:\ :am:bs:\ :co#80:li#24:\ :cd=\E/:ce=\EQ:cl=\EZ:cm=\EY%r%+ %+ :dc=\E\\:do=^J:\ :ei=:ho=\EH:ic=\E[:im=:nd=\EC:se=\EK:so=\EJ:sr=\En:\ :up=\EA: # This used to say "de#001202" which presumably refers to the stty bits # that need to be set for some version of Unix. We need the real delay # requirements in MS. mw2|Multiwriter 2:\ :hc:os:\ :co#132:\ :bl=^G:cr=^M:do=^J:sf=^J: # Entry largely based on wy60 and has the features of wy60ak. opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys +:\ :am:bw:hs:km:mi:ms:ul:xo:\ :Nl#8:co#80:lh#1:li#24:lw#8:ws#80:\ :#2=\E{:%9=\EP:&3=\Er:@7=\E[F:@8=\E7:F1=^AJ\r:\ :F2=^AK\r:F3=^AL\r:F4=^AM\r:F5=^AN\r:F6=^AO\r:\ :LF=\EA11:LO=\EA10:RA=\Ed.:RX=\Ec20:SA=\Ed/:SX=\Ec21:\ :ac=0wa_h[jukslrmqnxqzttuyv]wpxv:ae=\EH^C:al=\EE:\ :as=\EH^B:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=\E*:\ :cm=\Ea%i%dR%dC:cr=^M:ct=\E0:dc=\EW:dl=\ER:do=^J:\ :ds=\Ez(\r:ei=\Er:fs=^M:ho=\036:\ :if=/usr/lib/tabset/std:im=\Eq:ip=:\ :is=\E`\072\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\037\Ezz'\E[B\037\Ezz(\E[D\037\Ezz)\E[C\037\Ezz<\E[Q\037\Ezz`\E[F\037\EA1*\EZH12:\ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:\ :k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kA=\EE:\ :kB=\EI:kD=\EW:kE=\ET:kI=\EQ:kL=\ER:kN=\EK:kP=\EJ:\ :kS=\EY:kb=^H:kd=\E[B:kh=^^:kl=\E[D:kr=\E[C:ku=\E[A:\ :le=^H:mb=\EG2:me=\E(\EH\003\EG0\EcD:mh=\EGp:mk=\EG1:\ :mp=\E):mr=\EG4:nd=^L:nw=\r\n:pf=^T:pl=\EZ2%+?%s\177:\ :pn=\Ez%+/%s\r:po=^R:ps=\EP:px=\EZ1%+?%s\177:\ :r1=\E~!\E~4:r2=\EeF:r3=\EwG\Ee(:\ :..sa=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%'0'%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c:\ :se=\EG0:sf=^J:so=\EG4:sr=\Ej:st=\E1:ta=\011:\ :ti=\Ezz&\E[A\037\Ezz'\E[B\037\Ezz(\E[D\037\Ezz)\E[C\037\Ezz<\E[Q\037:\ :ts=\Ez(:uc=\EG8%p1%c\EG0:ue=\EG0:up=^K:us=\EG8:\ :ve=\E`1:vi=\E`0: # (ps300: changed ":pt@:" to "it@" -- esr) ps300|Picture System 300:\ :xt:\ :it@:\ :se@:so@:ue@:us@:tc=vt100: ramtek|ramtek 6000:\ :am:\ :co#78:li#24:\ :bl=^G:cl=[alpha]\n[erase]\n:cr=^M:do=^J:le=^H:sf=^J: # Upper case terminal, uses lower case for control sequences!!! tec400|tec scope:\ :sg#1:\ :al=e:cd=s:ce=c:cl=f:..cm=l%p2%~%c%p1%~%c:dc=t:dl=u:\ :do=h:ei=:ho=i:ic=d:im=:le=w:nd=g:se=|:so={:up=x: # From: <ucbvax!geoff> Mon Sep 21 21:15:45 1981 # This entry has been tested. tec500|tec 500:\ :am:bs:\ :co#80:li#24:\ :bl=^G:cl=\032:cm=\E=%+ %+ :cr=^M:do=^J:ho=^^:le=^H:\ :nd=^L:se=^\:sf=^J:so=^]:up=^K: # tec is untested, and taken from CB/Unix virtual terminal driver. # I would appreciate more information on this terminal, such as the # manufacturer and the model number. There are too many tecs in here. # (tec: removed obsolete ":ma=^K^P^_ :" -- esr) tec:\ :am:bs:\ :co#80:li#24:\ :bl=^G:cl=^L:cr=^M:do=^J:ho=^^:le=^H:nd=^_:sf=^J:\ :up=^K: teletec|Teletec Datascreen:\ :am:bs:\ :co#80:li#24:\ :bl=^G:cl=^L:cr=^M:do=^J:ho=^^:le=^H:nd=^_:sf=^J:\ :up=^K: # Terak made a PDP-11 based box with a bitmapped display that ran UCSD # Pascal as the native O/S. It was quite a nice box, and there were several # at Berkeley. terak|Terak emulating Datamedia 1520:\ :tc=dm1520: # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu> # This termcap is for the LANPAR Technologies VISION 3220 # terminal. The function key definitions k0-k5 represent the # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN, # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to # PF4 keys. # (v3220: mapped ":pt:" to default tabs, removed obsolete ":kn#10:" -- esr) v3220|LANPAR Vision II model 3220/3221/3222:\ :am:bs:mi:pt:xn:\ :co#80:li#24:\ :al=\E[L:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\ :dc=\E[P:dl=\E[M:ei=\E[4l:im=\E[4h:\ :is=\E>\E[?3l\E[?7h\E[?8h\E[p:k0=\E[1~:k1=\E[2~:\ :k2=\E[3~:k3=\E[4~:k4=\E[5~:k5=\E[6~:k6=\E[OP:\ :k7=\E[OQ:k8=\E[OR:k9=\E[OS:kd=\E[B:ke=\E>:kh=\E[H:\ :kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:nd=\E[C:se=\E[m:\ :so=\E[7m:sr=\EM:ue=\E[m:up=\E[A:us=\E[4m: # Does anybody know where these "wind" terminals came from? wind:\ :bs:\ :co#80:li#24:\ :cl=\EnP(\Eo:cm=\Ep%r%.%.:ho=\Ep\200\200:k1=\E5:\ :k2=\E6:k3=\E7:k4=\E8:kd=\E2:kl=\E3:kr=\E4:ku=\E1:\ :nd=^L:nl=^]:se=\Em^C:so=\Em^L:up=^K: wind16:\ :bs:\ :co#80:li#16:\ :cl=\EnP\020\Eo:cm=\Ep%r%.%.:ho=\Ep\200\200:nd=^L:\ :nl=^]:se=\Em^C:so=\Em^L:up=^K: wind40:\ :bs:\ :co#80:li#40:\ :cl=\EnP(\Eo:cm=\Ep%r%.%.:ho=\Ep\200\200:nd=^L:nl=^]:\ :se=\Em^C:so=\Em^L:up=^K: # (wind50: corrected :cl=\EnP\128\062\Eo: -- esr) wind50:\ :bs:\ :co#88:li#50:\ :cl=\EnP2\Eo:cm=\Ep%r%.%.:ho=\Ep\200\200:k1=\E5:\ :k2=\E6:k3=\E7:k4=\E8:kd=\E2:kl=\E3:kr=\E4:ku=\E1:\ :nd=^L:nl=^]:se=\Em^C:so=\Em^L:up=^K: # (xitex: removed obsolete ":ma=j^Jk^Pl :" -- esr) xitex|xitex sct-100:\ :bs:\ :co#64:li#16:\ :bl=^G:cd=\006\005:ce=\005:cl=\014:cm=\E=%+@%+@:\ :cr=^M:do=^J:ho=^D:le=^H:nd=\E+@A:sf=^J:sr=\E=@@\013:\ :up=^K: plasma|plasma panel:\ :am:bs:\ :co#85:li#45:\ :bl=^G:cl=^L:cr=^M:do=^J:ho=^^:le=^H:nd=^X:sf=^J:\ :up=^V: #### Homebrew and custom terminals # # Nu machine parameters taken from mit-vax. # smc - 5/21/85 # nuterminal:\ :am:mi:ms:\ :co#80:it#8:li#24:\ :ae=\EG:al=1*\EL:as=\EF:cd=60\EJ:ce=10\EK:cl=60\EE:\ :..cm=\EY%+ %+ :cr=^M:dc=2.5*\EN:dl=1*\EM:do=\EB:\ :ei=\EO:ho=\EH:im=\E@:ip=2.5*:k1=\ES:k2=\ET:k3=\EU:\ :k4=\EV:k5=\EW:k6=\EP:k7=\EQ:k8=\ER:kb=^H:kd=\EB:\ :kh=\EH:kl=\ED:kr=\EC:ku=\EA:l6=blue:l7=red:l8=white:\ :le=^H:nd=\EC:nw=^M^J:se=\Eq:sf=^J:so=\Ep:sr=\EI:\ :ta=^I:up=\EA:ve=\Ey4:vs=\Ex4: nu24|nuwindow:\ :mi:ms:\ :co#86:it#8:li#24:\ :ae=\EG:al=1*\EL:as=\EF:cd=\EJ:ce=\EK:cl=\EE:\ :..cm=\EY%+ %+ :cr=^M:dl=1*\EM:do=\EB:ei=\EO:ho=\EH:\ :im=\E@:ip=2.5*:kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:\ :ku=\EA:le=^H:nd=\EC:nw=^M^J:se=\Eq:sf=^J:so=\Ep:\ :sr=\EI:ta=^I:up=\EA:ve=\Ey4:vs=\Ex4: bnu|nu51|bnuwindow:\ :co#86:li#51:\ :tc=nuterminal: fnu|nu61|fnuwindow:\ :co#86:li#61:\ :tc=nuterminal: nunix-30|nu-telnet-30|nu-half -- Half nu screen thru telnet:\ :am:\ :co#78:it#8:li#30:\ :al=\EL:cd=\EJ:ce=\EK:cl=\EE:..cm=\EY%+ %+ :cr=^M:\ :dl=\EM:do=\EB:ho=\EH:ip=2.5*:kb=^H:kd=^J:kl=^H:\ :le=^H:nd=\EC:nw=^M^J:se=\Eq:sf=^J:so=\Ep:sr=\EI:\ :ta=^I:up=\EA: nunix-61|nu-telnet-61|nu-full| Full nu screen thru telnet:\ :co#78:li#61:\ :tc=nunix-30: bch|bc|bill croft homebrew:\ :am:bs:\ :co#96:li#72:\ :cl=^Z:cm=\E=%+ %+ :do=^J:ho=^^:le=^H:nd=^L:up=^K:\ :vb=: nucterm|rayterm|NUC homebrew:\ :am:bs:\ :co#80:li#24:\ :bl=^G:cd=^E:ce=^A:cl=\014:cr=^M:do=^J:ho=^B:le=^H:\ :ll=^K:nd=^C:sf=^J:up=^N: carlock|klc:\ :am:bs:\ :co#80:li#24:\ :al=^E:bl=^G:ce=^U:cl=\032:cm=\E=%+ %+ :cr=^M:\ :dc=\177:dl=^D:do=^J:ei=^T:ho=^^:im=^T:nd=^L:se=^V:\ :sf=^J:so=^V:up=^K:vb=\EV\EV: # uVAX qdss|qdcons|qdss glass tty:\ :am:bs:\ :co#128:li#57:\ :cl=1\032:cm=\E=%.%.:do=^J:le=^H:nd=^L:up=^K: # (ubell: removed obsolete ":ma=j^Jk^P^K^Pl :"; # mapped ":pt:" to default tabs; removed obsolete ":bc=^Y:" -- esr) ubell|ubellchar:\ :am:bs:pt:\ :co#80:li#24:\ :bl=^G:ce=\Ed:cl=^Z:cm=\E=%+ %+ :cr=^M:do=^J:ho=^^:\ :le=^H:nd=^L:sf=^J:ta=^I:up=^K: ttywilliams:\ :am:\ :co#80:li#12:\ :bl=^G:ce=^_:cl=^^:cr=^M:do=^K:ho=^]:le=^Y:nd=^X:\ :sf=^J:up=^Z: ######## ICH/ICH1 VERSUS RMIR/SMIR # # Some non-curses applications get confused if both ich/ich1 and rmir/smir # are present; the symptom is doubled characters in an update using insert. # These applications are technically correct; in both 4.3BSD termcap and # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir # unless the terminal needs both. This requirement is now rare; most ich # sequences do not require previous smir, and most smir insert modes do not # require ich1 before each character. # # For ncurses-based applications this is not a problem, as ncurses uses # one or the other as appropriate but never mixes the two. Therefore we # have not corrected entries like `linux' and `xterm' that specify both. # If you see doubled characters from these, use the linux-nic and xterm-nic # entries that suppress ich/ich1. # ######## ANSI/VT100/PC-TERM TERMINAL STANDARDS # # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals # # Most of the content of this comment is adapted from a table prepared by # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences # and discussion of some terminfo-related issues have been added. # # The table is a complete list of the defined ANSI X.364 control sequences. # In the main table, \E stands for an escape (\033) character, SPC for space. # Pn stands for a single numeric parameter to be inserted in decimal ASCII. # Ps stands for a list of such parameters separated by semicolons # # Default Type # Sequence Sequence Parameter or # Mnemonic Name Sequence Value Mode terminfo # ----------------------------------------------------------------------------- # APC Applicatn Program Command \E Fe - Delim - # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt # CCH Cancel Previous Character \E T - - - # CHA Cursor Horzntal Absolute \E [ Pn G 1 eF hpa (1) # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (2) # CNL Cursor Next Line \E [ Pn E 1 eF nel (3) # CPL Cursor Preceding Line \E [ Pn F 1 eF - # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - # CSI Control Sequence Intro \E [ - Intro - # CTC Cursor Tab Control \E [ Ps W 0 eF - # CUB Cursor Backward \E [ Pn D 1 eF cub # CUD Cursor Down \E [ Pn B 1 eF cud # CUF Cursor Forward \E [ Pn C 1 eF cuf # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (4) # CUU Cursor Up \E [ Pn A 1 eF cuu # CVT Cursor Vertical Tab \E [ Pn Y - eF - # DA Device Attributes \E [ Pn c 0 - - # DAQ Define Area Qualification \E [ Ps o 0 - - # DCH Delete Character \E [ Pn P 1 eF dch # DCS Device Control String \E P - Delim - # DL Delete Line \E [ Pn M 1 eF dl # DMI Disable Manual Input \E \ - Fs - # DSR Device Status Report \E [ Ps n 0 - - # EA Erase in Area \E [ Ps O 0 eF - # ECH Erase Character \E [ Pn X 1 eF ech # ED Erase in Display \E [ Ps J 0 eF ed (5) # EF Erase in Field \E [ Ps N 0 eF - # EL Erase in Line \E [ Ps K 0 eF el (5) # EMI Enable Manual Input \E b Fs - # EPA End of Protected Area \E W - - - # ESA End of Selected Area \E G - - - # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE - # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - # GSS Graphic Size Selection \E [ Pn SPC C none FE - # HPA Horz Position Absolute \E [ Pn ` 1 FE (1) # HPR Horz Position Relative \E [ Pn a 1 FE (6) # HTJ Horz Tab w/Justification \E I - FE (2) # HTS Horizontal Tab Set \E H - FE hts # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE (4) # ICH Insert Character \E [ Pn @ 1 eF ich # IL Insert Line \E [ Pn L 1 eF il # IND Index \E D - FE - # INT Interrupt \E a - Fs - # JFY Justify \E [ Ps SPC F 0 FE - # MC Media Copy \E [ Ps i 0 - - # MW Message Waiting \E U - - - # NEL Next Line \E E - FE nel (3) # NP Next Page \E [ Pn U 1 eF - # OSC Operating System Command \E ] - Delim - # PLD Partial Line Down \E K - FE - # PLU Partial Line Up \E L - FE - # PM Privacy Message \E ^ - Delim - # PP Preceding Page \E [ Pn V 1 eF - # PU1 Private Use 1 \E Q - - - # PU2 Private Use 2 \E R - - - # QUAD Typographic Quadding \E [ Ps SPC H 0 FE - # REP Repeat Char or Control \E [ Pn b 1 - rep # RI Reverse Index \E M - FE - # RIS Reset to Initial State \E c - Fs - # RM Reset Mode \E [ Ps l none - - # SD Scroll Down \E [ Pn T 1 eF rin # SEM Select Edit Extent Mode \E [ Ps Q 0 - - # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (7) # SL Scroll Left \E [ Pn SPC @ 1 eF - # SM Select Mode \E [ Ps h none - - # SPA Start of Protected Area \E V - - - # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE - # SR Scroll Right \E [ Pn SPC A 1 eF - # SS2 Single Shift 2 (G2 set) \E N - Intro - # SS3 Single Shift 3 (G3 set) \E O - Intro - # SSA Start of Selected Area \E F - - - # ST String Terminator \E \ - Delim - # STS Set Transmit State \E S - - - # SU Scroll Up \E [ Pn S 1 eF indn # TBC Tab Clear \E [ Ps g 0 FE tbc # TSS Thin Space Specification \E [ Pn SC E none FE - # VPA Vert Position Absolute \E [ Pn d 1 FE vpa # VPR Vert Position Relative \E [ Pn e 1 FE (8) # VTS Vertical Tabulation Set \E J - FE - # # --------------------------------------------------------------------------- # # Notes: # # (1) There seems to be some confusion abroad between CHA and HPA. Most # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls # the capability (hpa). # # (2) CHT corresponds to terminfo (tab). Usually it has the value ^I. # Occasionally (as on, for example, certain HP terminals) this has the HTJ # value. # # (3) terminfo (nel) is usually \r\n rather than ANSI \EE. # # (4) CUP and HVP are identical in effect. Some ANSI.SYS versions accept # HVP, but always allow CUP as an alternate. # # (5) See the VT100 discussion for the meaning of the ED parameter. # # (6) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals # use CUF for this function and ignore HPR # # (7) In SGR, the ANSI.SYS values for attributes are now nearly universal. # # (8) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals # use CUD for this function and ignore VPR. # # --------------------------------------------------------------------------- # # Abbreviations: # # Intro an Introducer of some kind of defined sequence; the normal 7-bit # X3.64 Control Sequence Introducer is the two characters "Escape [" # # Delim a Delimiter # # x/y identifies a character by position in the ASCII table (column/row) # # eF editor function (see explanation) # # FE format effector (see explanation) # # F is a Final character in # an Escape sequence (F from 3/0 to 7/14 in the ASCII table) # a control sequence (F from 4/0 to 7/14) # # Gs is a graphic character appearing in strings (Gs ranges from # 2/0 to 7/14) in the ASCII table # # Ce is a control represented as a single bit combination in the C1 set # of controls in an 8-bit character set # # C0 the familiar set of 7-bit ASCII control characters # # C1 roughly, the set of control characters available only in 8-bit systems. # This is too complicated to explain fully here, so read Jim Fleming's # article in the February 1983 BYTE, especially pages 214 through 224. # # Fe is a Final character of a 2-character Escape sequence that has an # equivalent representation in an 8-bit environment as a Ce-type # (Fe ranges from 4/0 to 5/15) # # Fs is a Final character of a 2-character Escape sequence that is # standardized internationally with identical representation in 7-bit # and 8-bit environments and is independent of the currently # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14) # # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the # ASCII table # # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII # table # # Pn is a numeric parameter in a control sequence, a string of zero or # more characters ranging from 3/0 to 3/9 in the ASCII table # # Ps is a variable number of selective parameters in a control sequence # with each selective parameter separated from the other by the code # 3/11 (which usually represents a semicolon); Ps ranges from # 3/0 to 3/9 and includes 3/11 # # Format Effectors versus Editor Functions # # A format effector specifies how following output is to be displayed. # An editor function allows you to modify the display. Informally # format effectors may be destructive; format effectors should not be. # # For instance, a format effector that moves the "active position" (the # cursor or equivalent) one space to the left would be useful when you want to # create an overstrike, a compound character made of two standard characters # overlaid. Control-H, the Backspace character, is actually supposed to be a # format effector, so you can do this. But many systems use it in a # nonstandard fashion, as an editor function, deleting the character to the # left of the cursor and moving the cursor left. When Control-H is assumed to # be an editor function, you cannot predict whether its use will create an # overstrike unless you also know whether the output device is in an "insert # mode" or an "overwrite mode". When Control-H is used as a format effector, # its effect can always be predicted. The familiar characters carriage # return, linefeed, formfeed, etc., are defined as format effectors. # # The ANSI Standard # # The complete document describing the standard, "ANSI X3.64-1979: # Additional Controls for Use with the American National Standard # Code for Information Interchange," can be ordered for $13.50 (plus # $4 postage) from # # Standards Sales Department # American National Standards Institute # 1430 Broadway # New York, NY 10018 # 212/354-3300 # # It's best to read the full standard before using it. It also helps # to have copies of the related standards "X3.4-1977: American # National Standard Code for Information Interchange" (the ASCII # standard) and "X3.41.1974: Code-Extension Techniques for Use with # the 7-Bit Coded Character Set of American National Standard for # Information Interchange." # # NOTES ON THE DEC VT100 IMPLEMENTATION # # Control sequences implemented in the VT100 are as follows: # # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND, # LNM, NEL, RI, RIS, RM, SGR, SM, TBC # # plus several private DEC commands. # # Erasing parts of the display (EL and ED) in the VT100 is performed thus: # # Erase from cursor to end of line Esc [ 0 K or Esc [ K # Erase from beginning of line to cursor Esc [ 1 K # Erase line containing cursor Esc [ 2 K # Erase from cursor to end of screen Esc [ 0 J or Esc [ J # Erase from beginning of screen to cursor Esc [ 1 J # Erase entire screen Esc [ 2 J # # The VT100 responds to receiving the DA (Device Attributes) control # # Esc [ c (or Esc [ 0 c) # # by transmitting the sequence # # Esc [ ? l ; Ps c # # where Ps is a character that describes installed options. # # The VT100's cursor location can be read with the DSR (Device Status # Report) control # # Esc [ 6 n # # The VT100 reports by transmitting the CPR sequence # # Esc [ Pl ; Pc R # # where Pl is the line number and Pc is the column number (in decimal). # # The specification for the DEC VT100 is document EK-VT100-UG-003. # # NOTES ON `PC-TERM' COMPATIBILITY # # The MS-DOS ANSI.SYS driver has set the de-facto standard for attribute # and color values in the SGR string. These are as follows: # # 0 all attributes off # 1 foreground bright # 4 underscore on # 5 blink on/background bright (not reliable with brown) # 7 reverse-video # 8 set blank (non-display) # 10 set primary font # 11 set first alternate font (on PCs, display ROM characters 1-31) # 12 set second alternate font (on PCs, display IBM high-half chars) # # Color attribute sets # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown, # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white # Bright black becomes gray. Bright brown becomes yellow, # # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing # when you try to set a "bright brown" (yellow) background with attribute # 5 (you get a blinking yellow foreground instead). A few displays # (including the System V console) support an attribute 6 that undoes this # braindamage. # # * Some older versions of ANSI.SYS have a bug that causes thems to require # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE # # The historical termcap file entries were written primarily in 4.4BSD termcap. # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set, # with the extension names chosen for compatibility with the termcap names # assigned in System V terminfo. There are some variant extension sets out # there. We try to describe them here. # # XENIX extensions: # # The XENIX extensions include a set of function-key capabilities as follows: # # code XENIX variable name terminfo name name clashes? # ---- ------------------- ------------- ----------------------- # CL key_char_left # CR key_char_right # CW key_change_window create_window # EN key_end kend # HM key_home khome # HP ?? # LD key_delete_line kdl1 # LF key_linefeed label_off # NU key_next_unlocked_cell # PD key_page_down knp # PL ?? # PN start_print mc5 # PR ?? # PS stop_print mc4 # PU key_page_up kpp pulse # RC key_recalc remove_clock # RF key_toggle_ref req_for_input # RT key_return kent # UP key_up_arrow kcuu1 parm_up_cursor # WL key_word_left # WR key_word_right # # The XENIX extensions also include the following character-set and highlight # capabilities: # # XENIX terminfo function # ----- -------- ------------------------------ # GS smacs start alternate character set # GE rmacs end alternate character set # GG :as:/:ae: glitch (analogous to :sg:/:ug:) # bo blink begin blink (not used in /etc/termcap) # be end blink (not used in /etc/termcap) # bb blink glitch (not used in /etc/termcap) # it dim begin dim (not used in /etc/termcap) # ie end dim (not used in /etc/termcap) # ig dim glitch (not used in /etc/termcap) # # XENIX also supposedly uses the following forms-drawing capabilities: # # single double type # ------ ------ ------------- # gv GV vertical line (|) # gh GH horizontal line (-) # g1 G1 top right corner # g4 G4 bottom right corner (_|) # g2 G2 top left corner # g3 G3 bottom left corner (|_) # gd GD down-tick character (T) # gl GL left-tick character (-|) # gr GR right-tick character (|-) # gc GC middle intersection (-|-) # gu GU up-tick character (_|_) # # However, there is some confusion about case. The scoansi entry uses # mixed-case versions of these, and the historical ibmpcx, lisa, trs16, and fos # entries have only the uppercase versions. Accordingly, the ncurses tools # don't try to translate these. # # AT&T Extensions: # # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of # nonstandard capabilities. Its signature is the KM capability, used to name # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this # set. Comments in the original, and a little cross-checking with other AT&T # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh: # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights), # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make # cursor invisible), and CV=:ve: (make cursor normal). # # TC Extensions: # # There is a set of extended termcaps associated with something # called the "Terminal Control" or TC package created by MainStream Systems, # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses # CF for civis and CO for cvvis. Finally, they define a boolean :ct: # that flags color terminals. ######## CHANGE HISTORY # # 9.1.0 (Wed Feb 1 04:50:32 EST 1995): # * First terminfo master translated from 8.3. # 9.2.0 (Wed Feb 1 12:21:45 EST 1995): # * Replaced Wyse entries with updated entries supplied by vendor. # 9.3.0 (Mon Feb 6 19:14:40 EST 1995): # * Added contact & status info from G. Clark Brown <clark@sssi.com>. # 9.3.1 (Tue Feb 7 12:00:24 EST 1995): # * Better XENIX keycap translation. Describe TC termcaps. # * Contact and history info supplied by Qume. # 9.3.2 (Sat Feb 11 23:40:02 EST 1995): # * Raided the Shufort FTP site for recent termcaps/terminfos. # * Added information on X3.64 and VT100 standard escape sequences. # 9.3.3 (Mon Feb 13 12:26:15 EST 1995): # * Added a correct X11R6 xterm entry. # * Fixed terminfo translations of padding. # 9.3.4 (Wed Feb 22 19:27:34 EST 1995): # * Added correct acsc/smacs/rmacs strings for vt100 and xterm. # * Added u6/u7/u8/u9 capabilities. # * Added PCVT entry. # 9.3.5 (Thu Feb 23 09:37:12 EST 1995): # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry # to use reverse-video standout so Emacs will look right. # * Added el1 capability to ansi. # * Added smacs/rmacs to ansi.sys. # 9.4.0 (Sat Feb 25 16:43:25 EST 1995): # * New mt70 entry. # * Added COPYRIGHTS AND OTHER DELUSIONS. # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics # smartvid & smarterm, ampex 175 & 219 & 232, # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20, # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2, # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan, # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500. # * Replaced the Perkin-Elmer entries with vendor's official ones. # * Restored the old minimal-ansi entry, luna needs it. # * Fixed some incorrect ip and proportional-padding translations. # 9.4.1 (Mon Feb 27 14:18:33 EST 1995): # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly. # * Make the xterm entry 65 lines again; create xterm25 and xterm24 # to force a particular height. # * Added beehive4 and reorganized other Harris entries. # 9.4.2 (Thu Mar 9 01:45:44 EST 1995): # * Merged in DEC's official entries for its terminals. The only old # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo). # * Replaced the translated BBN Bitgraph entries with purpose-built # ones from AT&T's SVr3. # * Replaced the AT&T entries with AT&T's official terminfos. # * Added teleray 16, vc415, cops10. # * Merged in many individual capabilities from SCO terminfo files. # 9.4.3 (Mon Mar 13 02:37:53 EST 1995): # * Typo fixes. # * Change linux entry so A_PROTECT enables IBM-PC ROM characters. # 9.4.4 (Mon Mar 27 12:32:35 EST 1995): # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803, # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21, # simterm, citoh and variants. # * Replaced sol entry with sol1 and sol2. # * Replaced Qume QVT and Freedom-series entries with purpose-built # terminfo entries. # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek # and dg200 entries using caps from from SCO. # * Added the usual set of function-key mappings to ANSI entry. # * Corrected xterm's function-key capabilities. # 9.4.5 (Tue Mar 28 14:27:49 EST 1995): # * Fix in xterm entry, cub and cud are not reliable under X11R6. # 9.4.6 (Thu Mar 30 14:52:15 EST 1995): # * Fix in xterm entry, get the arrow keys right. # * Change some \0 escapes to \200. # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995) # * Added apple (Videx card), adm1a, oadm31. # * Fixed malformed ampex csr. # * Fixed act4, cyb110; they had old-style prefix padding left in. # * Changed mandatory to advisory padding in many entries. # * Replaced HP entries up to hpsub with purpose-built ones. # * Blank rmir/smir/rmdc/smdc capabilities removed. # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924. # 9.4.8 (Fri Apr 7 09:36:34 EDT 199): # * Replaced the Ann Arbor entries with SCO's, the init strings are # more efficient (but the entries otherwise identical). # * Added dg211 from Shuford archive. # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk, # adm42-nl, pc52, gs6300, xerox820, uts30. # * Pull SCO's padding into vi200 entry. # * Improved capabilities for tvi4107 and other Televideo and Viewpoint # entries merged in from SCO's descriptions. # * Fixed old-style prefix padding on zen50, h1500. # * Moved old superbee entry to superbee-xsb, pulled in new superbee # entry from SCO's description. # * Reorganized the special entries. # * Added lm#0 to cbunix and virtual entries. # # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995): # * Restored cdc456tst. # * Fixed sb1 entry, SCO erroneously left out the xsb glitch. # * Added megatek, beacon, microkit. # * Freeze for ncurses-1.9 release. # # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995): # * Added historical data for TAB. # * Comment fixes from David MacKenzie. # * Added the new BSDI pc3 entry. # # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995) # * A change in the tic -C logic now ensures that all entries in # the termcap translation will fit in < 1024 bytes. # * Added `bobcat' and `gator' HP consoles and the Nu machine entries # from GNU termcap file. This merges in all their local information. # # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995) # * Changed tic -C logic to dump all capabilities used by GNU termcap. # * Added warnings about entries with long translations (restoring # all the GNU termcaps pushes a few over the edge). # # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995) # * Yet another tic change, and a couple of entry tweaks, to reduce the # number of long (> 1024) termcap translations back to 0. # # 9.6.0 (Mon May 1 10:35:54 EDT 1995) # * Added kf13-kf20 to Linux entry. # * Regularize Prime terminal names. # * Historical data on Synertek. # * Freeze for ncurses-1.9.1. # # 9.6.1 (Sat May 6 02:00:52 EDT 1995): # * Added true xterm-color entry, renamed djm's pseudo-color entry. # * Eliminate whitespace in short name fields, this tanks some scripts. # * Name field changes to shorten some long entries. # * Termcap translation now automatically generates empty rmir/smir # when ich1/ich is present (copes with an ancient vi bug). # * Added `screen' entries from FSF's screen-3.6.2. # * Added linux-nic and xterm-nic entries. # # 9.6.2 (Sat May 6 17:00:55 EDT 1995): # * Change linux entry to use smacs=\E[11m and have an explicit acsc, # eliminating some special-case code in ncurses. # # 9.7.0 (Tue May 9 18:03:12 EDT 1995): # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think # that captures everything unique from it. # * Added reorder script generator. # * Freeze for ncurses 1.9.2 release. # # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995): # * Added Sean Farley's kspd, flash, rs1 capabilities for linux. # * Added Olaf Siebert's corrections for adm12. # * ansi-pc-color now includes the colors and pairs caps, so that # entries which use it will inherit them automatically. # * The linux entry can now recognize the center (keypad 5) key. # * Removed some junk that found its way into Linux acsc. # # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995): # * Add 50% cut mark as a desperate hack to reduce tic's core usage. # * xterm doesn't try to use application keypad mode any more. # * Freeze for ncurses-1.9.3 release. # # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995): # * Added corrected sun entry from vendor. # * Added csr capability to linux entry. # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG. # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators. # * Some commented-out caps in long entries come back in, my code # for computing string-table lengths had a bug in it. # * pcansi series modified to fit comm-program reality better. # ######## REORDER # # Older termcap distributions featured a kluge called `reorder' intended to # time-optimize access to selected terminals by moving them to the front of # the file. This is obsolete under terminfo, but for completeness's sake # we give a reorder script generator here (strip off the leading #s to use). # #: mkreorder -- generate script to optimize access to given terminal types #: #: entries named on command line will be sorted to the front in reverse order #echo "ed -- termcap <<EOF" #for x in $* #do # echo "/^$x[|:]/;.,/^[a-z#]/-1m0" #done #echo "0a" #echo "." #echo "w termcap.sorted" #echo "q" #echo "EOF" #:end of script # # Invoke this script like this: # # mkreorder h19 wy60 vt100 >reorder # # The following sets edit modes for GNU EMACS # Local Variables: # fill-prefix:"\t" # fill-column:75 # End: ######## SHANTIH! SHANTIH! SHANTIH!